Behringer deepmind 12 инструкция на русском

1. Manuals
2. Brands
3. Behringer Manuals
4. Synthesizer
5. DEEPMIND 12
6. User manual

• Page 1
  User Manual DeepMind 12 True Analog 12-Voice Polyphonic Synthesizer with 4 FX Engines, 2 OSCs and LFOs per Voice, 3 ADSR Generators, 8-Channel Modulation Matrix, 32-Step Sequencer, Tablet Remote Control and Built-In WiFi…

• Page 2: Table Of Contents

  25. Appendix 2 — ARP/SEQ/LFO Sync Timing … 133 Thank you Thank you very much for expressing your confi dence in BEHRINGER products by purchasing the DeepMind 12 analog polyphonic synthesizer—our True Analog 12-Voice Polyphonic Synthesizer with 4 FX Engines, 2 OSCs and LFOs per Voice, 3 ADSR Generators, 8-Channel Modulation Matrix, 32-Step Sequencer, Tablet Remote Control and Built-In Wi-Fi.

• Page 3: Important Safety Instructions

  TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, the apparatus. When a cart alerts you to the presence of uninsulated BEHRINGER, BUGERA and DDA are trademarks is used, use caution when dangerous voltage inside the or registered trademarks of MUSIC Group IP Ltd.

• Page 4: About The Deepmind 12

  ELECTRONIC / KLARK TEKNIK FX and iPad Remote Control. parameters and bulk load/save). The DeepMind 12 was created to serve the creative needs of players, performers, • • Integrated and confi gurable Wi-Fi client / Access point allows easy and artists, sound designers, engineers and producers.

• Page 5: Initial Operation

  • • Sine, Triangle, Square, Ramp Up, Ramp Down, Sample and Hold, The product manual is designed to give you both an overview of the DeepMind 12 Sample and Glide. analog polyphonic synthesizer, as well as detailed information on each of the •…

• Page 6: Eff Ects

  Over 30 high grade studio quality chainable eff ects. • • Master clock with tap tempo. • • Eff ects from TC Electronic, Behringer X32 and Midas Consoles. • • BPM control and display. • • 4 Eff ects per Program.

• Page 7: Controls

  DeepMind 12 User Manual 3. Controls 3.1 Top Controls (14) (15) (16) (17) (18) (19) (20) (4) (8) (10) (11) (12) (13) (20)

• Page 8
  DeepMind 12 User Manual (1) DISPLAY — this large backlit LCD screen shows the synthesizer status, OSC 1 SQUAREWAVE- this switch turns the square wave output for parameters, and the fi ve main menus. The contrast and brightness are OSC 1 on/off .

• Page 9: Rear Panel

  DeepMind 12 User Manual (16) VCF — selects the envelope used to control the voltage controlled fi lter. VOLUME — controls the output level of the synthesizer. (17) MOD — selects the envelope used for user specifi c modulation. OCTAVE UP/DOWN — raise or lower the keyboard’s pitch range in steps of an octave.

• Page 10
  USB PORT — this USB type B jack allows connection to a computer. The DeepMind 12 will show up as a class-compliant USB MIDI device, capable of supporting MIDI in and out. The DeepMind 12 does not require any additional drivers to work with Windows, Android, MacOS and iOS devices.

• Page 11: Selecting Programs

  Editing Memory Pressing -NO or +YES will load the previous/next program in the bank. The DeepMind 12 contains a total of 1,024 programs. There are 8 Banks (A-H) Pressing BANK/UP to BANK/DOWN will change banks. of 128 programs. All programs can be overwritten as required, please consult the chapter on restoring factory defaults if you need to return the DeepMind 12 4.2.2 Using the Program Browser…

• Page 12
  • • AMBIENT — Used for ambient or texture sounds. When you load a program, all the physical controls on the DeepMind 12 may not MODULAR -Used for programs with modular type programming. match the position stored in memory. In order to send all the physical positions •…
• Page 13
  DeepMind 12 User Manual 4.7 Restoring Program Data The third section is REPLACED BY which allows you to name the program to be written. You can use the -NO/+YES switches to step through each character of the If you edit a program and forget to write it before selecting a new program — name and use the UP/DOWN switches, the rotary knob, or the faders to change don’t panic — a backup of the program is stored in memory.

• Page 14: The Compare Function

  Page 3 shows the UNISON, VCF, HPF and VCA faders: page shown will be the last page you used. If you have never used the COMPARE function since turning the DeepMind 12 on, it will default to page 1. Page 4 shows the ENVELOPE faders: Each page of the COMPARE menu shows a section of the faders.

• Page 15: Playing Guide

  5. Playing Guide 5.2 Keyboard (Velocity/Aftertouch) This section describes the use of the DeepMind 12 for playing and performance. It covers all the main aspects of the synthesizer. There are 64 physical controls on the DeepMind 12 made up of illuminated switches, faders, rotary knobs and wheels.

• Page 16
  The operation of this pedal can be customized using the GLOBAL / PEDAL SETTINGS menu. The DeepMind 12 has 12 independent voices. There are 12 LEDs above the For more detail on controlling advanced parameters relating to the pedal input keyboard showing the status of each voice.

• Page 17: Signal Path / Voice Structure

  DeepMind 12 User Manual 6. Signal Path / Voice Structure The signal path / voice structure from the OSCs to the main outputs is completely analog. The DSP eff ects can be bypassed completely to maintain the analog path. When routed through the DSP eff ects all sampling is done at 24-Bit 48 kHz. All internal DSP eff ects are processed at 32/40-Bit fl oating point resolution.

• Page 18: Midi Routing

  LFO1&2 MOD Env 22,880 Possible Modulations (All Automatable) MIDI Routing The DeepMind 12 off ers extreme MIDI routing possibilities, allowing you to integrate the synthesizer with many diff erent pieces of hardware and software. Keyboard Data Control Data SOFT-THRU MIDI-CTRL…

• Page 19: Menu System

  Note: The DeepMind 12 will always return you to the last page within a menu The available categories are listed here: that was accessed.

• Page 20
  (9) («DETUNE +/-50.0cents» in the example diagram) — In this area you will see If the letters appear as normal text the external source is not present and the DeepMind 12 will use its internal Master BPM until the external source is more detailed information on the parameter being adjusted.
• Page 21
  FX ROUTING — At the top of the FX OVERVIEW menu you will see the FX ROUTING shown as a series of 4 boxes representing the individual eff ects. In order to expand the sonic possibilities of the DSP FX inside the DeepMind 12 there are several routing options for the four slots.
• Page 22
  DeepMind 12 User Manual 7.2.3 SELECTING FX MODE When you stop on an eff ect it is automatically loaded into the chosen slot. To select an eff ects MODE make sure that the ‘ < ‘ symbol is highlighted next to…
• Page 23
  DeepMind 12 User Manual 7.2.9 COPY/PASTE FX SETTINGS 7.2.10 MOVING EFFECTS If you need to copy eff ects settings from a previously stored eff ect, please follow If you need to move an eff ect to a diff erent slot, please follow this procedure.
• Page 24
  There is a help message on the bottom of each screen for the DeepMind 12 MIDI sockets on the rear of the synthesizer. You can to show you what the next menu will be if you press the GLOBAL switch again.
• Page 25
  • • • • the DeepMind 12 USB port on the rear of the synthesizer. You can choose Off for the DeepMind 12 WIFI connection. You can choose Off (No controller (No controller messages will be sent), Cc (Continuous Controller) or NRPN messages will be sent), Cc (Continuous Controller) or NRPN (Non-Registered (Non-Registered Parameters.
• Page 26
  • • Client — This mode allows the DeepMind 12 to act as a client so that it can To navigate the options in Access Point mode, use the UP and DOWN switches. connect to an access point.

• Page 27: Keyboard Settings

  Note: Backing up your data is an important factor when working with the cycle through the pages. DeepMind 12. It allows you to keep a safe copy of your programming, manage In this menu there are all the settings relating to keyboard.

• Page 28: Pedal Settings

  The PEDAL/CV input can work with a typical foot pedal, where the voltage is supplied by the DeepMind 12 and fed back at a level which is dependant on the Soft position of the pedal. The further the pedal is pressed, the higher the voltage.

• Page 29
  GATE input from a CV & GATE interface, or a modular messages which are designed to aid you while learning how the DeepMind 12 synthesizer is connected, the gate signal will move though the steps of the operates.

• Page 30: System Settings

  If the local temperature is high, please make sure after a fi rmware upgrade or when being requested to do so by an authorised that the fans are not turned off . The DeepMind 12 is equipped with 2 fans, one Behringer support technician.

• Page 31
  DeepMind 12 User Manual CALIBRATE VOICES CAL MOD WHEEL To calibrate the MOD WHEEL, please use the following process: Note: During the calibration the GLOBAL, -NO and +/YES switches will be fl ashing. If at any time you want to cancel the calibration routine, you can press the -/NO switch.
• Page 32
  DeepMind 12 User Manual Then move the PITCH WHEEL to its maximum position (shown on the panel). CAL AFTERTOUCH You will see the following display showing the maximum position of the PITCH To calibrate the KEYBOARD AFTERTOUCH please use the following process:…
• Page 33
  DeepMind 12 User Manual 7.2.17 BACKUP (backup Menu) CALIBRATE PEDAL To calibrate the PEDAL please use the following process: The last item in the SYSTEM SETTINGS menu is BACKUP. Note: During the calibration the GLOBAL, -NO and +/YES switches will be fl ashing.
• Page 34
  You will then see a page of the COMPARE menu (page 1 is displayed below). The page shown will be the last page you used. If you have never used the COMPARE function since turning the DeepMind 12 on, it will default to page 1. Page 4 shows the ENVELOPE faders: Each page of the COMPARE menu shows a section of the faders .
• Page 35
  DeepMind 12 User Manual 7.4 WRITE (Write Menu) To compare the current program with the intended program location you can press the COMPARE switch to listen to the diff erence. To return to the current To write a program to memory press the WRITE switch to open the WRITE program, press the compare switch again.

• Page 36: Programming

  DeepMind 12 User Manual 8. Programming 8.1.1 CHORD SWITCH The DeepMind 12 CHORD switch allows you to program a chord to memory. That 8.1 CHORDS/ARP/SEQ/SYNC SETTINGS chord is then transposed across the full range of the keyboard. The ARP/SEQ section controls all parameters relating to the internal CHORD SCREEN UPPER SECTION ARPEGGIATOR, CONTROL SEQUENCER and PATTERN editing.

• Page 37
  When the trigger notes are received the FLASHING SLOW DeepMind 12 will play respective chords based on incoming trigger notes. Now press the root note key for the chord to be transposed up or down from.
• Page 38
  (or the RECORD switch if replacing or adding an existing chord). The POLY The DeepMind 12 POLY CHORD switch allows you to program multiple chords to CHORD switch will begin double fl ashing and you will then see the screen with memory.
• Page 39
  HOLD=ON The TAP/HOLD switch has two functions: TAP — When you strike the TAP switch successively the DeepMind 12 will calculate the Master BPM value from the tempo of your tapping. After 5 taps the BPM will update to the tempo of your tapping.
• Page 40
  DeepMind 12 User Manual 8.1.5 ARP RATE FADER 8.1.6 ARP GATE TIME FADER The RATE fader controls the Master BPM RATE of the ARPEGGIATOR. The Master The GATE TIME fader controls the length of the note as shown below. BPM is used by the ARPEGGIATOR, CONTROL SEQUENCER and is also used in any…
• Page 41
  The OCTAVE range is from 1 to 6. If you only choose one OCTAVE The DeepMind 12 ARPEGGIATOR allows you to play a pattern of notes based on the ARPEGGIATOR will simply cycle the notes based on the root note and the the individual keys being held.
• Page 42
  DeepMind 12 User Manual • • UP-INV — Notes are played from the lowest to the highest, then the chord is • • UP-ALT — Notes are played as lowest, then highest, then next lowest, then inverted and the notes are played from the lowest to the highest. This is then next highest and so on until the notes have all been played.
• Page 43
  DeepMind 12 User Manual • • CHORD -The notes are played together for each step of the ARPEGGIATOR. SWING — This option allows you to adjust the swing (or groove) of the ARPEGGIATOR. ARPEGGIATOR MODE — CHORD When applying SWING, every other step is delayed by an amount set by the swing value.
• Page 44
  DeepMind 12 User Manual (2) STEP INDICATORS — The STEP values are shown at the top of the screen. The ARP PATTERN EDITING — To use the PATTERN EDITOR make sure that the ‘ < ‘ symbol on the PATTERN line is highlighted. Then press the +/YES switch and the current step can be selected using the rotary knob, each click will move the PATTERN EDITOR will then be displayed.
• Page 45
  DeepMind 12 User Manual (7) SAVE/IMPORT -This switch allows you to SAVE the current PATTERN, or The GATE TIME for each step can then be changed by using the UP/DOWN switches or using the data entry fader. IMPORT a PATTERN. When you press the WRITE switch (under the SAVE/…
• Page 46
  DeepMind 12 User Manual Note: If you have edited a PATTERN and then go to select another PATTERN CLOCK DIVIDER — This option allows you divide the Master BPM in a number without saving your changes you will be presented with a warning message that of ways to produce the CONTROL SEQUENCER CLOCK.
• Page 47
  DeepMind 12 User Manual SLEW-RATE — This option allows you to adjust the SLEW RATE of the CONTROL The controls for the SEQUENCE EDITOR are as follows: SEQUENCER. The SLEW RATE is the rate at which the value changes from one step to the next.
• Page 48
  RATE fader to control the CLOCK DIVIDER. If no MIDI clock is present switches or using the data entry fader. at the MIDI IN socket, the DeepMind 12 will AUTO revert to the internally generated clock. (5) COMP — This switch allows you to COMPARE the current status of the SEQUENCE being edited against the stored SEQUENCE.
• Page 49
  Master BPM RATE as described in the by modulating the fi lter cut off frequency. The DeepMind 12 LFO uses traditional EDIT LFO section.

• Page 50: Lfo Edit Menu

  DeepMind 12 User Manual The fader position, current value and stored value for the LFO DELAY TIME fader is The LFO EDIT switch will then start fl ashing and the LFO EDIT menu is then shown: shown on the PROG screen. There is also a visualization of the waveform as shown below: To navigate the options in the LFO EDIT menu, use the UP, DOWN, switches.

• Page 51
  DeepMind 12 User Manual RATE — This option is the same as the LFO RATE fader on the surface. Any changes ARP SYNC — This option allows you to turn ARP-SYNC (Arpeggiator on the surface will be refl ected here.
• Page 52
  PITCH MODULATION is preferred in this instance. Fader Position Note: Because the DeepMind 12 LFO can reach well into the audio range (1280 Hz) it is possible to create traditional frequency modulation (FM) when the LFO is used as the source for PITCH MODULATION of the OSCs.
• Page 53
  DeepMind 12 User Manual 8.3.2 OSC 1 PWM FADER The fader position, current value and stored value for the OSC 1 PITCH MOD fader is shown on the PROG screen. There is also a visualization of the modulation as shown below. The arrows indicate the polarity of the modulation..
• Page 54
  DeepMind 12 User Manual The characteristics of the PULSE waveform are shown below: Note: When an ENVELOPE is used as a PWM source, the arrows indicate the range of modulation as shown below. In this mode the PWM fader is used to adjust the PULSE WAVE amount of modulation from 0 to +/- 49%:.
• Page 55
  LFO signal the term PITCH MODULATION is preferred in this instance. SQUARE WAVE Note: Because the DeepMind 12 LFO can reach well into the audio range (1280 Hz) it is possible to create traditional frequency modulation (FM) when the OSC (SQR) LFO is used as the source for PITCH MODULATION of the OSCs The diagram below shows the waveforms obtained with LFO control of OSC 2.
• Page 56
  DeepMind 12 User Manual As you increase the amount of PITCH MODULATION the variance in the pitch of Note: for ENVELOPE sources the arrow will only point in the UP direction oscillator will increase resulting in larger increases and decreases as indicating that the base modulation will be positive from the base pitch.
• Page 57
  DeepMind 12 User Manual 8.3.7 OSC 2 PITCH FADER As you increase the amount of TONE MODULATION the positive and negative parts of the cycle are split by a pulse. The further you increase the fader, the width of the pulse increases.
• Page 58
  DeepMind 12 User Manual 8.3.8 OSC 2 LEVEL FADER 8.3.9 OSC SYNC SWITCH ON=SYNC ACTIVE This switch controls the synchronisation of the OSCs. The OSC 1 pitch is set by the keys that you play, and the OSC 2 pitch may be tuned to (or detuned from) this frequency.
• Page 59
  The noise generator is implemented using analog circuitry and creates pink to set the source for the respective parameter noise with a low frequency roll-off designed specifi cally for the DeepMind 12. The noise generator is commonly used with non-pitched sounds or non-pitched 8.3.12 OSC 1 MENU…
• Page 60
  DeepMind 12 User Manual P.MOD-SRC — This option allows you to select the source for the amount of PITCH • • LFO-1(Uni) — Unipolar use of the LFO 1 waveform. MODULATION from the following: • • LFO-2(Uni) — Unipolar use of the LFO 1 waveform.
• Page 61
  DeepMind 12 User Manual • • LFO-1 — Bipolar use of the LFO 1 waveform. In this mode the PWM fader is P.MOD MODE — This option allows you to select which oscillators are controlled used to adjust the amount of modulation from 0 to +/- 49%.
• Page 62
  DeepMind 12 User Manual P.MOD-SRC — This option allows you to select the source for the amount of PITCH • • LFO-1(Uni) — Unipolar use of the LFO 1 waveform. MODULATION from the following: • • LFO-2(Uni) — Unipolar use of the LFO 1 waveform.
• Page 63
  The POLY section is where you can control all settings related to the POLYPHONY of the DeepMind 12. The options allow you to be highly creative in your use of the polyphonic, unison and monophonic capabilities of the voice structure.
• Page 64
  The fader position, current value and stored value for the UNISON DETUNE fader is POLYPHONY — This allows you to choose how the DeepMind 12 voices are shown on the PROG screen. There is also a visualization of the detuning amount…
• Page 65
  DeepMind 12 User Manual • • Unison-6 — The next available six voices are allocated to each note played. PRIORITY — When in monophonic mode, or when more notes are played than Detuning is applied as shown below: there are voices available (due to polyphonic/unison settings), this mode controls which notes are prioritized.
• Page 66
  DeepMind 12 User Manual 8.4.4 PITCH PARAMETERS MENU PORTA-MODE — This option allows you to confi gure the PORTAMENTO function to operate in diff erent ways depending on your requirements. The options are as To access the PITCH PARAMETERS menu press the POLY EDIT switch.
• Page 67
  When a positive setting is chosen, the OSC 1 PORTA-TIME will decrease. At its for the DeepMind 12. The VCF fi lter changes the tone color created by the OSCs maximum value (127) the OSC 1 PORTA-TIME will be zero and the pitch change and NOISE generator by cutting off , or emphasizing frequencies/harmonics.
• Page 68
  DeepMind 12 User Manual The diagram below shows the results from high, medium and low settings of the The DeepMind 12 fi lter is capable of being driven into self oscillation. Unlike many cut-off frequency when applied to the SAWTOOTH and SQUARE waveforms.
• Page 69
  DeepMind 12 User Manual This can be useful to control the sonic character of the fi lter as the 2-pole mode P.BEND-FREQ — This option controls how much the PITCH BEND WHEEL position will allow more of the signal above the cut-off frequency to pass and sound will aff ect the cut-off frequency.
• Page 70
  DeepMind 12 User Manual 8.5.7 VCF LFO FADER This is also true for negative values when the VCF ENVELOPE is inverted. The VCF ENV range is from 0.0% to 100.0%. The default VCF ENV setting is 0.0%(Off ). The fader position, current value and stored value for the VCF ENV fader is shown on the PROG screen.
• Page 71
  DeepMind 12 User Manual 8.6 VCA 8.5.8 VCF KYBD FADER The VOLTAGE CONTROLLED AMPLIFIER (VCA) is split into two stages. The fi rst is a per voice stereo VCA which can be modulated by the VCA ENVELOPE, the PAN-SPREAD setting, the VELOCITY SENSITIVITY of the keyboard and the Pan Destination in the Mod Matrix.
• Page 72
  DeepMind 12 User Manual 8.7 HPF 8.6.2 VCA EDIT MENU To access the VCA PARAMETERS menu press the VCA EDIT switch. The HIGH PASS FILTER (HPF) is applied to the output of the VCA. Because the VCA has summed all the voices the HPF will aff ect all voice simultaneously by design.
• Page 73
  The fader position, current value and stored value for the HPF FREQ fader is shown on the PROG screen. There is also a visualization of the fi lter curve as The DeepMind 12 has three envelope generators. Each of these generates a shown below.
• Page 74
  DeepMind 12 User Manual 8.8.1 VCA ENVELOPE SWITCH 8.8.2 VCF ENVELOPE SWITCH To access the VCA ENVELOPE page press the VCA Envelope switch. To access the VCF ENVELOPE page press the VCF ENVELOPE switch. FLASHING=EDIT FLASHING=EDIT The VCA ENVELOPE switch will then start fl ashing and the VCA ENVELOPE menu is…
• Page 75
  DeepMind 12 User Manual 8.8.3 CURVES SWITCH MOD ENVELOPE SWITCH To access the MOD ENVELOPE page press the MOD ENVELOPE switch. ON=CURVES FLASHING=EDIT This switch changes the operation of the ADSR faders from adjusting the ADSR stages to adjusting the curve of each stage.
• Page 76
  Using a source to modulate the depth of another modulation Decay/Release Curve Settings Taking the concept further the DeepMind 12 off ers a huge amount of sources and destinations. For a full list please consult the tables at the end of this section.

• Page 77: Modulation Destinations

  DeepMind 12 User Manual 8.9.1 MODULATION SOURCES MODULATION SOURCE — To add a modulation source navigate to the source on the bus you wish to use and select the required source. The following modulation sources are available: Name Description Pitch Bend…

• Page 78
  DeepMind 12 User Manual Name Description Name Description TMod Depth OSC 2 Tone Modulation Depth Env3 RelCur Envelope 3 Release Time Curve OSC2 PM Dep OSC 2 Pitch Modulation Depth VCA All** VCA Gain for All Voices Porta Time Portamento Time…

• Page 79: Eff Ects Reference Guide

  ROOM SIZE adjusts the size of the room eff ect being created Here is a list and brief description of the eff ects available on the DeepMind 12 incrementally from small to large. HIGH CUT sets the frequency above which synthesizer.

• Page 80: Gated Reverb

  DeepMind 12 User Manual Plate Reverb Reverse Reverb A plate reverb was originally created by sending a signal through a transducer Reverse Reverb takes the trail of a reverb, turns it around, and places it in front to create vibrations on a plate of sheet metal which were then picked up as an of the sound source.

• Page 81
  DeepMind 12 User Manual Delay + Chamber Enhancer These Enhancers are so called “Psycho EQs”. They can enhance the signal spectrum in bass, midrange and high frequencies but they diff er from traditional Here we have combined Delay and Chamber reverb, so a single device can provide equalizers.

• Page 82: Tap Delay

  DeepMind 12 User Manual Rack Amplifi er NoiseGate Modelled after the Tech 21 SansAmp, the Stereo / Dual Guitar Amp simulates the The Noise Gate not only handles the duties of a traditional version, but also off ers sound of plugging into a real guitar amp. From shimmering cleans to saturated enhanced «Transient Accenting»…

• Page 83
  DeepMind 12 User Manual 4-Tap Delay Modulation Delay + Reverb The 4-Tap Delay provides 4 stages of delay with independently adjustable gain Modulation Delay combines three of the most used time modulation eff ects and rate, allowing unique syncopation to be created in the layered repeats.

• Page 84: Rotary Speaker

  DeepMind 12 User Manual Flanger Stereo / Dual Pitch The Flanger emulates the phase-shifting sound (comb-fi ltering) originally Pitch shifting is often used in two diff erent ways. One is to set the Mix knob lower created by applying pressure against the fl ange of the reel on a tape recorder.

• Page 85
  DeepMind 12 User Manual 9.3 Eff ects Parameters Note: Eff ects parameters which appear as modulation destinations are marked with a ‘*’. TC-DeepVRB (TC DEEP REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Preset — — — Options: Ambience, Church, Gate, Hall, Lo Fi, Modulated, Plate, Room, Spring, Tile, Default.
• Page 86
  DeepMind 12 User Manual RoomRev (ROOM REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.3 s 28.9 s Controls the amount of time it takes for the reverb to dissipate.
• Page 87
  DeepMind 12 User Manual HallRev (HALL REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.2 s 4.9 s Controls the amount of time it takes for the reverb to dissipate.
• Page 88
  DeepMind 12 User Manual PlateRev (PLATE REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.5 s 10.0 s Controls the amount of time it takes for the reverb to dissipate.
• Page 89
  DeepMind 12 User Manual GatedRev (GATED REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 140.0 ms 1000.0 ms Controls the amount of time it takes for the reverb to dissipate.
• Page 90
  DeepMind 12 User Manual ChorusVerb (CHORUS & REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 4.0 Hz Adjusts the rate of the chorus. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Adjusts the modulation depth of the chorus.
• Page 91
  DeepMind 12 User Manual FlangeVerb (FLANGER & REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 4.0 Hz Adjusts the rate of the fl anger. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Adjusts the modulation depth of the fl anger.
• Page 92
  DeepMind 12 User Manual Enhancer (ENHANCING EQ) DM12 REF PARAMETER UNITS DESCRIPTION OutGain -12.0 dB 12.0 dB Compensates for changes in level resulting from the eff ect. Spread 0.0% 100% Emphasizes the stereo content for a wider mix. BassGain 0.0% 100% Adjusts the gain of the bass band.
• Page 93
  DeepMind 12 User Manual MulBndDist (MULTIBAND DISTORTION) DM12 REF PARAMETER UNITS DESCRIPTION InputGain -24.0 dB 24.0 dB Controls the amount of input gain applied to the signal. Dist Types — — — Distortion Type: VAL(Valve), SAT(Saturation), TUB (Tube), & Post Filter variants (PFV/PFS/PFT).
• Page 94
  DeepMind 12 User Manual EdisonEX1 (STEREO IMAGING) DM12 REF PARAMETER UNITS DESCRIPTION — Allows the eff ect to be turned On or Off . InMode — Controls the input mode (Stereo or Mid/Side). OutMode — Controls the output mode (Stereo or Mid/Side).
• Page 95
  DeepMind 12 User Manual NoiseGate (NOISE GATE) DM12 REF PARAMETER UNITS DESCRIPTION Threshold -50.0 Sets signal level at which gate opens. Range -100.0 Control adjusts the amount of gain reduction applied to the signal below threshold. Attack 20.0 Adjusts time taken for gate to open after an over-threshold signal.
• Page 96
  DeepMind 12 User Manual 3TapDelay (3-TAP DELAY) DM12 REF PARAMETER UNITS DESCRIPTION Time 1.0 ms 1500.0 ms Sets the master delay time, and the fi rst stage. Time synchronised options from 4 to 1/64 bars. GainT 0.0% 100% Sets the gain level of the fi rst stage of the delay.
• Page 97
  DeepMind 12 User Manual T-RayDelay (TEL-RAY DELAY) DM12 REF PARAMETER UNITS DESCRIPTION 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. Delay 0.0% 100% Adjusts the master delay time. Sustain 0.0% 100% Controls how long the delay is sustained for. Warning at 100% build up will occur.
• Page 98
  DeepMind 12 User Manual ModDlyRev (MODULATION/DELAY/REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Time 1.0 ms 1500.0 ms Sets the master delay time. Time synchronised options from 4 to 1/64 bars. Factor — — — Sets the delay to rhythmic fractions (1, 1/2, 2/3, 3/2).
• Page 99
  DeepMind 12 User Manual Chorus-D (DIMENSIONAL CHORUS) DM12 REF PARAMETER UNITS DESCRIPTION — Allows the eff ect to be turned On or Off . Mode — Switches the operation between Mono and Stereo modes. 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
• Page 100
  100 DeepMind 12 User Manual Phaser (STEREO PHASER) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 5 Hz Sets the modulation speed. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Controls the depth (amount) of modulation. Reso 0.0%…
• Page 101
  101 DeepMind 12 User Manual Dual Pitch (DUAL PITCH SHIFTER) DM12 REF PARAMETER UNITS DESCRIPTION Semi1 — -12.0 12.0 Adjusts the pitch of the fi rst channel in semi-tones. Cent1 — -50.0 50.0 Adjusts the pitch of the fi rst channel in cents.

• Page 102: Short-Cuts

  In order to speed up programming tasks there are several short-cuts To change any of the OSC Modulation sources press and hold the OSC EDIT switch. implemented on the DeepMind 12 as listed below. While holding the switch you can use any of the following faders to set the…

• Page 103: Applications

  103 DeepMind 12 User Manual 11. Applications On the following pages we present the most useful applications for your DeepMind 12 analog polyphonic synthesizer, using a few practical examples. 11.1 Studio Confi guration Example Wi-Fi Connection DeepMind iOS App Footswitch…

• Page 104
  104 DeepMind 12 User Manual 11.2 Live Confi guration Example Footswitch Expression Pedal Laptop Computer Mixing console Headphones MIDI Controller Active Loudspeakers…
• Page 105
  105 DeepMind 12 User Manual 11.3 Band/Practice Confi guration Example DeepMind iOS App DeepMind iOS App Footswitch Expression Pedal Headphones…
• Page 106
  106 DeepMind 12 User Manual 11.4 Interfacing with Other Hardware Example Gate Modular Synthesizer Mixing console Headphones Active Loudspeakers…
• Page 107
  107 DeepMind 12 User Manual 11.5 Interfacing with Modular Synthesizer Example Sync to another Player Footswitch External Sound Module Expression Pedal Mixing console Headphones MIDI Controller Active Loudspeakers…

• Page 108: Daw Midi Confi Guration

  Ensure that the relevant interface (MIDI/USB/Wi-Fi) is confi gured correctly in the GLOBAL-CONNECTIVITY menu. Ensure that the DeepMind 12 is an active input and output in your DAW / Application MIDI setup. Ensure that the your DAW is setup to receive MIDI on the same channel as the DeepMind 12 Transmit channel.

• Page 109: System Block Diagram

  109 DeepMind 12 User Manual 13. System Block Diagram…

• Page 110
  110 DeepMind 12 User Manual…

• Page 111: Connection Wiring Diagrams

  111 DeepMind 12 User Manual 14. Connection Wiring Diagrams The DeepMind 12 analog polyphonic synthesizer uses servo-balanced outputs. Headphones Connection Cable Wiring The circuit design has an automatic hum suppression with balanced signals and strain relief clam is able to operate, without problem, even at highest levels. Externally-induced sleeve mains hum etc, is thus effi ciently suppressed.

• Page 112: Technical Specifi Cations

  112 DeepMind 12 User Manual 15. Technical Specifi cations Global Display Backlit LCD Type Class compliant USB 2.0, type B Main Menus PROG, FX, GLOBAL, COMPARE, WRITE Supported operating systems Windows 7 or higher** Mac OS X 10.6.8 or higher…

• Page 113: Midi Implementation Chart

  113 DeepMind 12 User Manual 16. MIDI Commands MIDI (Musical Instrument Digital Interface) is a messaging protocol used to transfer or communicate information between devices and/or host computers. 16.1 MIDI Implementation Chart MIDI Implementation Chart v. 2.0 Manufacturer: Behringer Model: DeepMind 12 Version:1.0…

• Page 114
  114 DeepMind 12 User Manual 16.2 Continuous Controller Messages MIDI Implementation Chart v. 2.0 Control Number Information Page 1 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks Bank Select (MSB) —…
• Page 115
  115 DeepMind 12 User Manual MIDI Implementation Chart v. 2.0 Control Number Information Page 2 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks VCA Envelope Decay Curve…
• Page 116
  116 DeepMind 12 User Manual MIDI Implementation Chart v. 2.0 Control Number Information Page 3 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks Registered Parameter Number(MSB) —…

• Page 117: Midi Nrpn Commands

  Data Entry LSB & MSB messages. Note : The DeepMind 12 treats NPRNs from USB, Wi-Fi & the physical MIDI ports separately i.e. it has a ‘selected NPRN parameter’ for each interface.

• Page 118
  118 DeepMind 12 User Manual 14-bit Parameter Name Range Notes VCF LFO Depth 0-255 VCF LFO Select LFO 1 (0), LFO 2 (1) VCF Aftertouch > LFO Depth 0-255 VCF Mod Wheel > LFO Depth 0-255 VCF Keyboard Tracking 0-255…
• Page 119
  119 DeepMind 12 User Manual 14-bit Parameter Name Range Notes Mod 5 Destination 0-129 See Modulation Matrix Destination List Mod 5 Depth 0-255 -128 (0) to +127 (255) Mod 6 Source 0-22 See Modulation Matrix Source List Mod 6 Destination…

• Page 120: Global Commands

  120 DeepMind 12 User Manual 14-bit Parameter Name Range Notes 39 — 50 167 — 178 FX 1 Params 0-255 FX Slot 1 Parameters FX 2 Type 0-33 See FX Type list 52 — 63 180 — 191 FX 2 Params 0-255 FX Slot 2 Parameters…

• Page 121: Midi Sysex Commands

  SysEx and its implementation please consult the MIDI Manufacturers Association at www.midi.org. For specifi c information regarding the support of SysEx data within any third party Audio/MIDI applications please consult the manufacturer. The SysEx implementation of the DeepMind 12 is described in the following sections: 19.2.1 Universal System Exclusive Message (Device Inquiry) This message can be used to detect the presence of the synth and to get the current global MIDI channel setting (also used as a Sysex Device ID when addressing the synth).

• Page 122
  122 DeepMind 12 User Manual APP NOTIFY RESPONSE MIDI Bytes Description System Exclusive Status Byte 00, 20, 32 Behringer Manufacturers ID Phat12 Model ID Device ID 0-15 Control App Notify Response Midi Receive Ch 0-16 (All, 1-16) Midi Transmit Ch 0-15 (1-16)
• Page 123
  123 DeepMind 12 User Manual 19.2.4 Dump Messages These messages can be used to request a data dump and are shown with their responses. Each parameter is stored in its own byte and the data format is documented in the NRPN table.
• Page 124
  124 DeepMind 12 User Manual GLOBAL PARAMETER DUMP RESPONSE MIDI Bytes Description System Exclusive Start 00, 20, 32 Behringer Manufacturers ID DeepMind12 Model ID Device ID ( 0-15 )  Global Parameter Dump Response Comms Protocol Version — 45 Bytes of Global Data packed into 56 7-bit message bytes.
• Page 125
  125 DeepMind 12 User Manual PROGRAM BANK DUMP REQUEST (Response is individual program dump responses in a sequence) MIDI Bytes Description System Exclusive Start 00, 20, 32 Behringer Manufacturers ID DeepMind12 Model ID Device ID ( 0-15 )  Bank Durmp Request…
• Page 126
  126 DeepMind 12 User Manual CALIBRATION DATA DUMP REQUEST MIDI Bytes Description System Exclusive Start 00, 20, 32 Behringer Manufacturers ID DeepMind12 Model ID Device ID ( 0-15 )  Calibration Data Dump Request End of System Exclusive CALIBRATION DATA DUMP RESPONSE…

• Page 127: Firmware Update

  GLOBAL-SYSTEM SETTINGS-CALIBRATE menu Turn on the POWER switch located on the rear panel. 21.8 The pitch and/or mod wheel is not The DeepMind 12 operating system will start and you should see the Behringer responding as expected. logo. This can be resolved by running the pitch wheel or mod wheel calibration routine Once the PROG menu is visible you can then turn on power to the connected found in the GLOBAL-SYSTEM SETTINGS-CALIBRATE menu.

• Page 128: Bootloader Menu

  This option will reset the global settings. 22.7 7- Reset ALL This option will perform all formatting resetting covered in options 1-5 settings. 22.8 8- EXIT This option will exit the bootloader menu and return the DeepMind 12 to normal operation.

• Page 129: Defi Nition Of Terms

  129 DeepMind 12 User Manual 23. Defi nition of Terms Chorus An eff ect which uses multiple copies of a signal played together and slightly out of time, to create a shimmering eff ect. Sometimes referred to as This glossary provides an explanation of the symbols, terms and abbreviations “Ensemble”.

• Page 130
  130 DeepMind 12 User Manual Digitally Controlled Oscillator An analog oscillator circuit controlled and Fundamental Frequency The lowest frequency of a periodic waveform. monitored by a digital processor. The advantages over a VCO is increased stability Gain The amount of signal level increase provided by an amplifi er stage.
• Page 131
  131 DeepMind 12 User Manual Meter: Visual device to indicate the level of a signal. Parametric EQ A type of EQ that allows all of the parameters of equalisation to be changed, including centre frequency, boost/cut in gain and bandwidth.
• Page 132
  132 DeepMind 12 User Manual Resonance The emphasis of frequencies around the cut-off point just before Sync (Arp/Seq) A function where an arpeggiator or sequencer is synchronised to attenuation starts to occur. As resonance increases it will reach a point where the a tempo value.

• Page 133: Appendix 1 — Octave Shifting

  133 DeepMind 12 User Manual 24. Appendix 1 — Octave Shifting +2 OCTAVES +1 OCTAVE DEFAULT -1 OCTAVE -2 OCTAVES (Middle C) DeepMind 12 Keyboard 25. Appendix 2 — ARP/SEQ/LFO Sync Timing ARP/SEQ/LFO SYNC TIMING RATIO DESCRIPTION One bar Half note…

• Page 134
  134 DeepMind 12 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION DeepMind 12 Responsible Party Name: MUSIC Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 Phone Number: +1 702 800 8290 DeepMind 12 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B…
• Page 135
  135 DeepMind 12 User Manual Dedicate Your Life to MUSIC…

• Page 1
  User Manual DeepMind 12 True Analog 12-Voice Polyphonic Synthesizer with 4 FX Engines, 2 OSCs and LFOs per Voice, 3 ADSR Generators, 8-Channel Modulation Matrix, 32-Step Sequencer, Tablet Remote Control and Built-In WiFi…

• Page 2: Table Of Contents

  28. Appendix 5 — Revert to Panel ……163 Thank you Thank you very much for expressing your confidence in BEHRINGER products by purchasing the DeepMind 12 analog polyphonic synthesizer—our True Analog 12-Voice Polyphonic Synthesizer with 4 FX Engines, 2 OSCs and LFOs per Voice, 3 ADSR Generators, 8-Channel Modulation Matrix, 32-Step Sequencer, Tablet Remote Control and Built-In Wi-Fi.

• Page 3: Important Safety Instructions

  LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, manufacturer, or sold with This symbol, wherever it appears, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA, the apparatus. When a cart alerts you to the presence of uninsulated COOLAUDIO and EUROCOM are trademarks or…

• Page 4: About The Deepmind 12

  DeepMind 12 User Manual About the DeepMind 12 • Classic polyphonic synthesizer with 12 true analog voices for insanely fat and • Fully servo-balanced stereo outputs for highest signal integrity authentic sounds • CV/pedal input for connection to modular systems •…

• Page 5: Introduction

  1.2 The product manual • Variable slew rate. The product manual is designed to give you both an overview of the DeepMind 12 • Mono / Poly / Spread modes for linking and unlinking LFO phase across analog polyphonic synthesizer, as well as detailed information on each of the voices.

• Page 6
  2.10 Clock • 35 high grade studio quality chainable effects. • Master clock with tap tempo. • Effects from TC Electronic, Behringer X32 and Midas Consoles. • BPM control and display. • 4 Effects per Program. • MIDI clock sync.

• Page 7: Controls

  DeepMind 12 User Manual 3. Controls 3.1 Top Controls (14) (15) (16) (17) (18) (19) (20) (4) (8) (10) (11) (12) (13) (20)

• Page 8
  DeepMind 12 User Manual (1) DISPLAY — this large backlit LCD screen shows the synthesizer status, (7) OSC 1 & 2 — These analog full range oscillators create waveforms which are parameters, and the five main menus. The contrast and brightness are the sound source of the synthesizer.
• Page 9
  DeepMind 12 User Manual ENVELOPE — these are the three envelopes used to modulate (12) other parameters. A [ATTACK]- controls the attack time of the envelope. D [DECAY] — controls the decay time of the envelope. S [SUSTAIN] — controls the sustain level of the envelope.

• Page 10: Rear Panel

  DeepMind 12 will show up as a class-compliant USB MIDI device, capable of supporting MIDI in and out. The DeepMind 12 does not require any SUSTAIN — this 1/4″ TS jack allows you to connect a sustain pedal, such as a (25) additional drivers to work with Windows, Android, MacOS and iOS devices.

• Page 11: Program Management

  Editing Memory 1. Pressing -/NO or +/YES will load the previous/next program in the bank. The DeepMind 12 contains a total of 1024 programs. There are 8 Banks (A-H) 2. Pressing BANK/UP or BANK/DOWN will change banks. of 128 programs. All programs can be overwritten as required; please consult the chapter on restoring factory defaults if you need to return the DeepMind 12 4.2.2 Using the Program Browser…

• Page 12
  DeepMind 12 User Manual 4.5 Favorites 4.2.3 Using MIDI Program Change messages You can change the program using a MIDI program change message. This You can create a list of favorite programs that can be recalled quickly, allowing special MIDI message can be sent from your Digital Audio Workstation (DAW) or…
• Page 13
  4.7 Revert to Panel When you load a program, all the physical controls on the DeepMind 12 may not match the position stored in memory. In order to send all the physical positions to the program (rather than moving each individually until you reach the…
• Page 14
  DeepMind 12 User Manual 4.8 Restoring Program Data 5. The second section is the «CATEGORY» where you can select any of the available program categories. Again you can use the BANK/UP, BANK/DOWN 1. If you edit a program and forget to write it before selecting a new program, switches, the rotary knob, or the fader to select the required category.

• Page 15: The Compare Function

  2. You will then see a page of the COMPARE menu. The page shown will be the last page you used. If you have not used the COMPARE function since turning the DeepMind 12 on, it will default to page 1 (shown below). •…

• Page 16: Playing Guide

  5. Playing Guide 5.2 Keyboard (Velocity/Aftertouch) This section describes the use of the DeepMind 12 for playing and performance. It covers all the main aspects of the synthesizer. There are 64 physical controls on the DeepMind 12 made up of illuminated switches, faders, rotary knobs and wheels.

• Page 17
  AFTERTOUCH. • The operation of this pedal can be customized using the GLOBAL / PEDAL • The DeepMind 12 has 12 independent voices. There are 12 LEDs above the SETTINGS menu. keyboard showing the status of each voice. • For more detail on controlling advanced parameters relating to the pedal •…

• Page 18: Signal Path / Voice Structure

  DeepMind 12 User Manual 6. Signal Path / Voice Structure The signal path / voice structure from the OSCs to the main outputs is completely analog. The DSP effects can be bypassed completely to maintain the analog path. When routed through the DSP effects, all sampling is done at 24-Bit 48 kHz. All internal DSP effects are processed at 32/40-Bit floating point resolution.

• Page 19: Midi Routing

  8×8 Mod Matrix LFO1&2 MOD Env 22,880 Possible Modulations (All Automatable) MIDI Routing The DeepMind 12 offers extreme MIDI routing possibilities, allowing you to integrate the synthesizer with many different pieces of hardware and software. Keyboard Data Control Data SOFT-THRU MIDI-CTRL…

• Page 20: Menu System

  The DeepMind 12 will always return you to the last page within a menu that was The available categories are listed here: accessed. This way you can return to your last change without needing to cycle •…

• Page 21
  If the letters appear as normal text the external source is not present and the DeepMind 12 will use its internal Master BPM until the external source is (9) («DETUNE ±50.0cents» in the example diagram) — In this area you will see present.
• Page 22
  4 boxes representing the individual effects. In order to expand the sonic possibilities of the DSP FX inside the DeepMind 12, there are 10 routing options for the four slots. SERIAL 1 PARALLEL 2/3/4 (M-7) •…
• Page 23
  DeepMind 12 User Manual 7.2.3 SELECTING FX MODE 7.2.4 SELECTING FX 1. To select an effects MODE, make sure that the ‘ < ‘ symbol is highlighted next 1. To load an effect into a slot, make sure that the ‘ < ‘ symbol is highlighted to the effects MODE symbol, then you can either turn the rotary knob, or use next to the slot you wish to use.
• Page 24
  DeepMind 12 User Manual 7.2.7 FX PAGES 1-4 7.2.9 COPY/PASTE FX SETTINGS 1. To view the FX parameters, press the FX switch any time you are in the FX If you need to copy all 4 effects settings from one program to another, please OVERVIEW menu.
• Page 25
  DeepMind 12 User Manual 7.2.10 MOVING EFFECTS If you need to move an effect to a different slot, please follow this procedure: 1. Ensure you have saved any edits you have made to your current program if required. 2. Press the FX switch to enter the FX OVERVIEW page.
• Page 26
  • MIDI-CTRL — This option sets the MIDI CONTROLLER communication mode for the DeepMind 12 MIDI sockets on the rear of the synthesizer. You can Note: The first time you access the GLOBAL menu after turning on the choose from the following options: DeepMind 12, you will see the CONNECTIVITY page.
• Page 27
  PROG-CHANGE — This option sets the PROGRAM CHANGE communication • NONE — No program change messages will be sent or received. mode for the DeepMind 12 USB host port. You can choose from the following options: • RX-CHANNEL — This option sets the MIDI channel that will be used to RECEIVE MIDI messages.
• Page 28
  In Access Point mode, you will need to enter the details of the access point you • Client — This mode allows the DeepMind 12 to act as a client so that it wish to create. can connect to an access point.
• Page 29
  2. To exit the SysEx EXPORT menu, press the GLOBAL switch to return to the exporting of these files back to the DeepMind 12. One example for the PC is called CONNECTIVITY menu. To exit the CONNECTIVITY menu, press the PROG switch «MIDI OX,»…

• Page 30: Keyboard Settings

  MIDI keyboard/controller, using its MIDI OUT connected to setting will reduce the dynamic range of key pressure. the DeepMind 12 MIDI IN. It is sometimes useful to turn LOCAL CONTROL off when using the DeepMind 12 to control other hardware/software AfterTouch Sensitivity Curve Settings synthesizers, effects and/or applications.

• Page 31: Pedal Settings

  The PEDAL/CV input can work with a typical foot pedal, where the voltage synthesizer is connected, the gate signal will step though the notes of is supplied by the DeepMind 12 and fed back at a level which is dependant the ARPEGGIATOR. In this mode the ARPEGGIATOR note duration is set by on the position of the pedal.

• Page 32
  Arp&Seq-Gate — Here the SUSTAIN input is mapped to the ARPEGGIATOR notes, and to the CONTROL SEQUENCER steps. When GATE In this menu are all the settings relating to the DeepMind 12 Panel Controls. input from a CV & GATE interface, or a modular synthesizer is connected, the gate signal will step though the notes of the ARPEGGIATOR, and also 1.
• Page 33
  CALIBRATE line is highlighted, and then press the +/YES switch. full range. The DeepMind 12 has 12 voices. Each voice has its own LFO, OSC, VCF, ENV and • HOST-VER — This is the version number of the host firmware.
• Page 34
  DeepMind 12 User Manual CALIBRATE VOICES CAL MOD WHEEL To calibrate the MOD WHEEL, please use the following procedure: Note: During the calibration the GLOBAL, -/NO and +/YES switches will be flashing. If at any time you want to cancel the calibration routine, you can press the -/NO switch.
• Page 35
  DeepMind 12 User Manual CAL PITCH WHEEL 8. At this point move the PITCH WHEEL within the dead zone where you don’t feel the tension of the spring. This is ensure that no pitch information is sent To calibrate the PITCH WHEEL, please use the following procedure: while the pitch wheel is not being touched.
• Page 36
  DeepMind 12 User Manual CAL AFTERTOUCH CALIBRATE PEDAL To calibrate the KEYBOARD AFTERTOUCH, please use the following procedure: To calibrate the PEDAL please use the following process: Note: During the calibration the GLOBAL, -/NO and +/YES switches will be Note: During the calibration the GLOBAL, -/NO and +/YES switches will be flashing.
• Page 37
  2. You will then see a page of the COMPARE menu. The page shown will be the last page you used. If you have not used the COMPARE function since turning the DeepMind 12 on, it will default to page 1 (shown below). •…
• Page 38
  DeepMind 12 User Manual 7.5 WRITE (Write Menu) Page 1 shows the ARP/SEQ and LFO faders. (The Portamento rotary knob is represented by the first fader on the left.) 1. To write a program to memory, first press the WRITE switch.
• Page 39
  DeepMind 12 User Manual 8. To compare the current program with the intended program location, you can press the COMPARE switch to listen to the difference. To return to the current program, press the COMPARE switch again. 9. Once you have selected the new location and named the program, press the WRITE switch again to write the program.

• Page 40: Programming

  • CLOCK NOTES — One of the great advantages of having a Master BPM is that the LFOs, ENVELOPES, and many EFFECTS parameters of the DeepMind 12 can The letter T on the highlighted key shows the last played note.

• Page 41
  DeepMind 12 User Manual CHORD SCREEN SOFT KEYS — At the bottom of the chord screen are 3 labels 4. The status line shows the text «CUSTOM-TYPE-NOTES» where: which indicate the software function of the illuminated PROG, GLOBAL and •…
• Page 42
  When keyboard LOCAL control is OFF, only the trigger notes from external keyboards will be sent to any connected devices. When trigger notes are received, the DeepMind 12 will play respective chords based on incoming trigger notes. ILLUMINATED POLY CHORD BANKS — There are 4 memory banks (A, B, C, and D) in which to store and recall your poly chords.
• Page 43
  DeepMind 12 User Manual PEG MODES — Above and below the keyboard illustration are small «pegs» that TRIGGER TYPES show the keys that are notes (N) of an existing poly chord, and the keys that are • T – The letter T is shown printed on all trigger keys.
• Page 44
  WIZARD mode. using the WIZARD (described later). Note: In the procedures that follow, the DeepMind 12 is connected and running • TYPE — If the chord type is recognized as one that is saved in the WIZARD in normal operation (LOCAL is ON), so you can hear the notes and poly chords.
• Page 45
  DeepMind 12 User Manual 9. The trigger key is now ready for use. In the above example, with the POLY POLY CHORD CREATION USING THE WIZARD CHORD switch still on, each time you press the G3 key, the poly chord made The poly chord «WIZARD»…
• Page 46
  DeepMind 12 User Manual • SPREAD2 MODIFIER – Add the selected chord note in the selected 3. Play and hold a note that you would like to be the root note, then the main OCTAVE (default -1), as shown below, with F2 being added by the WIZARD menu will appear.
• Page 47
  DeepMind 12 User Manual 7. The new chord will be saved in the bank, and its details will appear in the 9. If the chord was created with the manual chord record mode (that is, not status line as shown below: using the Wizard), its information text will include the word «CUSTOM.»…
• Page 48
  SLOW The TAP/HOLD switch has two functions: • TAP — When you strike the TAP switch successively, the DeepMind 12 will • The Master BPM RATE range is from 20.0 to 275.0 BPM, and the default value calculate the Master BPM value from the tempo of your tapping. After 5 taps is 120.0 BPM.
• Page 49
  DeepMind 12 User Manual 8.1.6 ARP GATE TIME FADER 8.1.7 EDIT ARP/SEQ SWITCH • The ARPEGGIATOR allows you to play a pattern of notes based on the individual keys being held. This section covers in detail all the parameters related to the ARPEGGIATOR.
• Page 50
  DeepMind 12 User Manual • OCT — This option allows you to choose how many OCTAVES the ARPEGGIATOR • UP-INV — Notes are played from the lowest to the highest, then the will cycle through. The OCTAVE range is from 1 to 6. If you only choose one…
• Page 51
  DeepMind 12 User Manual UP-ALT — Notes are played as lowest, then highest, then next lowest, • CHORD -The notes are played together for each step of the • ARPEGGIATOR. then next highest and so on until the notes have all been played. This is then repeated.
• Page 52
  DeepMind 12 User Manual • RATE(BPM) — This option is the same as the RATE fader on the surface. Any • ARP PATTERN SELECTION — To select an ARPEGGIATOR PATTERN, make changes on the surface will be reflected here. sure that the ‘ < ‘ symbol on the PATTERN line is highlighted. The default setting is None.
• Page 53
  DeepMind 12 User Manual (2) STEP INDICATORS — The STEP numbers are shown at the top of the screen. The GATE TIME for each step can then be changed by using the BANK/UP or The current step can be selected using the rotary knob, and each click will BANK/DOWN switches, or the DATA ENTRY fader.
• Page 54
  DeepMind 12 User Manual (7) SAVE/IMPORT -This switch allows you to SAVE the current PATTERN, or Note: If you have edited a PATTERN or IMPORTED a new one, and then go to IMPORT a PATTERN. When you press the WRITE switch (under the SAVE/…
• Page 55
  DeepMind 12 User Manual 8.1.8 EDIT CTRL SEQUENCER RATIO DESCRIPTION The CONTROL SEQUENCER allows you to create a pattern which can be used to Four notes modulate other parameters. This section covers in detail all the parameters Three notes related to the CONTROL SEQUENCER.
• Page 56
  DeepMind 12 User Manual • SLEW-RATE — This option allows you to adjust the SLEW RATE of the CONTROL SEQUENCE EDITING SEQUENCER. The SLEW RATE is the rate at which the value changes from one 1. To use the SEQUENCE EDITOR, make sure that the ‘ < ‘ symbol on the step to the next.
• Page 57
  DeepMind 12 User Manual (3) VALUE — The VALUE of each step is shown by the height of the bar within the (6) SAVE -This switch takes you to the WRITE PROGRAM dialog (i.e. the normal step. To adjust the value for a step, press the PROG switch (under the VALUE use of the WRITE switch).
• Page 58
  MIDI (Auto) — The Master BPM clock is sourced from the MIDI IN socket and uses the RATE fader to control the CLOCK DIVIDER. If no MIDI clock is present at the MIDI IN socket, the DeepMind 12 will AUTO revert to the internally generated clock.
• Page 59
  • The LFO RATE fader controls the speed of the LFO. The DeepMind 12 offers an LFO speed which can reach into audio frequencies, opening another door to creative modulation possibilities. Decreasing the value will make the LFO RATE slower, and increasing the…

• Page 60: Lfo Edit Menu

  DeepMind 12 User Manual 8.2.2 LFO DELAY TIME FADER 8.2.3 LFO WAVEFORMS INDICATORS • The DELAY TIME fader controls the amount of delay before the LFO starts. • The LFO waveform shape setting is always shown on the LEDs. When the LFO waveform starts, it is faded-in over a period of time. If you The LFO waveform shape in use will have an illuminated LED next to it.

• Page 61
  DeepMind 12 User Manual RATIO DESCRIPTION 4. Selected parameters are adjusted using the -/NO and +/YES switches, the rotary knob or the DATA ENTRY fader. The rotary knob has a click which Four notes allows very accurate control. The fader allows rapid adjustment across the full range.
• Page 62
  PITCH MODULATION is preferred in this instance. Note: Because the DeepMind 12 LFO can reach well into the audio range, it is possible to create traditional frequency modulation (FM) when the LFO is…
• Page 63
  DeepMind 12 User Manual The diagram below shows the waveforms obtained with LFO control of The fader position, current value and stored value for the OSC 1 PITCH MOD OSC 1: fader is shown on the PROG screen. There is also a visualization of the modulation as shown below.
• Page 64
  DeepMind 12 User Manual 8.3.2 OSC 1 PWM FADER The characteristics of the PULSE waveform are shown below: PULSE WAVE (33% PULSE) HARMONIC CONTENT 4th 5th 7th 8th The fader position, current value, and stored value for the OSC 1 PWM fader •…
• Page 65
  DeepMind 12 User Manual 8.3.4 SQUARE WAVEFORM SWITCH 8.3.3 SAWTOOTH WAVEFORM SWITCH ON=SAWTOOTH ON=SQUARE • This switch controls the SQUARE waveform output for OSC 1. • This switch controls the SAWTOOTH waveform output for OSC 1. The SQUARE waveform has a hollow sound, which does not sound as rich The SAWTOOTH waveform has a rasping, buzzy and hard sound.
• Page 66
  PITCH MODULATION is preferred in this instance. Note: Because the DeepMind 12 LFO can reach well into the audio range, it is possible to create traditional frequency modulation (FM) when the LFO is used as the source for PITCH MODULATION of the OSCs.
• Page 67
  DeepMind 12 User Manual 8.3.6 OSC 2 TONE MOD FADER Note: for LFO sources, the TONE MOD fader is used to adjust the amount of modulation from 0 to ± 49 % . Note: for ENVELOPE sources, the TONE MOD fader is used to adjust the amount of modulation from 0 to ±…
• Page 68
  DeepMind 12 User Manual 8.3.8 OSC 2 LEVEL FADER The fader position, current value, and stored value for the OSC 2 PITCH fader is shown on the PROG screen. There is also a visualization of the pitch setting as shown below: Note: The centre horizontal section of the line shown in the visualization, highlights the fine resolution that is available around the centre point.
• Page 69
  OSC 2 can create complex timbres and rich harmonies. DeepMind 12. The noise generator is commonly used with non-pitched sounds or non-pitched components of a sound, for example a snare drum or OSC SYNC EXAMPLE 1 — OSC2 LOWER FREQUENCY THAN OSC1 an atmospheric sound.
• Page 70
  DeepMind 12 User Manual 8.3.11 OSC EDIT SWITCH (OSC 1) • P.MOD-SRC — This option allows you to select the source for the amount of PITCH MODULATION from the following: 1. To access the OSC1 PARAMETERS EDIT menu, press the OSC EDIT switch once.
• Page 71
  DeepMind 12 User Manual • LFO-1(Uni) — Unipolar use of the LFO 1 waveform. • LFO-2 — Bipolar use of the LFO 2 waveform. In this mode the PWM fader is used to adjust the amount of modulation from 0 to ± 49%.
• Page 72
  DeepMind 12 User Manual • P.MOD MODE — This option allows you to select which oscillators are 8.3.12 OSC EDIT SWITCH (OSC 2) controlled by the OSC 1 PITCH MOD fader. 1. To access the OSC EDIT menu, press the OSC EDIT switch.
• Page 73
  DeepMind 12 User Manual There is also a visualization of the modulation as shown below. The Note: In the visualization for Uni-polar LFO sources, the arrow only arrows indicate the polarity of the modulation. points in the UP direction, indicating that the modulation will be positive from the base pitch.
• Page 74
  ENV-2 — Bipolar use of the ENV 2 envelope. In this mode the TONE MOD PITCH, and POLY CHAIN operation of the DeepMind 12. The available -options fader is used to adjust the amount of modulation from 0 to ± 49%.
• Page 75
  EDIT switch again. UNISON 6 The following options are available in the VOICE PARAMETERS menu: WAVEFORM POLYPHONY — This allows you to choose how the DeepMind 12 voices are • ROOT NOTE allocated from one of the following options: FREQUENCY •…
• Page 76
  The default PRIORITY setting is Last. Note: PRIORITY is not available as an option when in POLY CHAIN mode because excess notes are played on other DeepMind 12 units in the Poly Chain. (See the CHAIN PARAMETERS MENU). •…
• Page 77
  The pitch distance from note to note will affect the time it takes CAUTION: If you ever suspect that your DeepMind 12 seems to be out of tune, it is to slide between notes. Sliding is only applied when notes overlap. The a good idea to check the values for TRANSPOSE and GLOBAL-TUNE in this menu.
• Page 78
  (-127) the OSC 2 PORTA-TIME will be zero, and the pitch DeepMind units. change will happen immediately (no sliding). A single DeepMind 12 unit has a maximum of 12 voices that can play at any one time (12-Voice Polyphony). If further voices are attempted than are available, PORTAMENTO BALANCE then information is lost.
• Page 79
  DeepMind 12 User Manual • RANGE-LOWER — This option allows you to set up the lower key for your 3. Audio Connections — The L/R line-level audio output of each DeepMind KEYBOARD SPLIT. You can either set the value manually, using the -/NO and unit connects to the line-level inputs of an audio mixer.
• Page 80
  KEYBOARD SPLIT using a MIDI 5-pin cable as follows: • In the first DeepMind 12 unit, set POLYPHONY to UNISON-3 and press a key. You will see 3 Voice LEDs light up per key. So if you press 4 keys, then 12 •…
• Page 81
  For example, if the first unit is a DeepMind 12 with the keyboard, it will play as normal. The MIDI connection to the other unit, such as a DeepMind 12D desktop model, will allow it to play at the same time.
• Page 82
  The VOLTAGE CONTROLLED FILTER (VCF) is an advanced filter designed specifically middle C. for the DeepMind 12. The VCF filter changes the tone color created by the OSCs and NOISE generator by cutting off, or emphasizing frequencies/harmonics. The 2. The second DeepMind unit can play the notes that are middle C and above.
• Page 83
  FREQUENCY (Hz) The DeepMind 12 filter is capable of being driven into self oscillation. Unlike many other synthesizers, the DeepMind 12 can guarantee an accurate pitch The VCF FREQ range is from 50.0 Hz to 20000.0 Hz. The default VCF even when the filter resonance is pushed to (and past) the point where the FREQUENCY setting is 20000.0 Hz (fully open).
• Page 84
  DeepMind 12 User Manual 8.5.3 2-POLE SWITCH 8.5.4 VCF EDIT SWITCH ON=2P / OFF=4P FLASHING=EDIT • This switch controls the configuration of poles used in the VCF. The number 1. To access the VCF menu press the VCF EDIT switch.
• Page 85
  DeepMind 12 User Manual 8.5.6 INVERT SWITCH • MW-LFO-DEPTH — This option controls how much the MOD WHEEL position will affect the LFO MODULATION DEPTH. This allows you to add LFO modulation of the filter frequency expressively while you play.
• Page 86
  DeepMind 12 User Manual 8.5.7 VCF LFO FADER 8.5.8 VCF KYBD FADER • The VCF LFO fader controls the amount of VCF LFO modulation that will be • The VCF KYBD fader controls the keyboard tracking of the VCF. The keyboard applied to the cut-off frequency value.
• Page 87
  DeepMind 12 User Manual 8.6 VCA 8.6.2 VCA EDIT MENU The VOLTAGE CONTROLLED AMPLIFIER (VCA) is split into two stages. The first 1. To access the VCA PARAMETERS menu, press the VCA EDIT switch. is a per-voice stereo VCA which can be modulated by the VCA ENVELOPE, the PAN-SPREAD setting, the VELOCITY SENSITIVITY of the keyboard, and the Pan Destination in the Mod Matrix.
• Page 88
  8.7.1 HPF FREQ FADER ON=BASS BOOST • This switch controls the BOOST stage of the DeepMind 12. The boost function enables an analog circuit which is designed to boost low frequencies at 100 Hz using a shelving equalization and DC blocking functionality.
• Page 89
  8.8 ENVELOPES 8.8.1 VCA ENVELOPE SWITCH The DeepMind 12 has three envelope generators. Each of these generates a 1. To access the VCA ENVELOPE page, press the VCA Envelope switch. control signal with 4 stages (Attack, Decay, Sustain, and Release).
• Page 90
  DeepMind 12 User Manual 8.8.2 VCF ENVELOPE SWITCH 8.8.3 MOD ENVELOPE SWITCH 1. To access the VCF ENVELOPE page, press the VCF ENVELOPE switch. 1. To access the MOD ENVELOPE page, press the MOD ENVELOPE switch. ON = EDIT ON = EDIT 2.
• Page 91
  DeepMind 12 User Manual 8.8.4 CURVES SWITCH 3. To return to normal operation of the ADSR stages, press the CURVES switch again. The CURVES switch will no longer illuminate, and the faders will now control the ADSR stages of whichever envelope switch is currently on: VCF, VCF, or MOD.
• Page 92
  Taking the concept further, the DeepMind 12 offers a huge amount of sources and destinations. For a full list please consult the tables at the end of this section. The DeepMind 12 MOD MATRIX allows creation of eight «busses.» Each bus has a source, a destination modulation, and a routing depth.

• Page 93: Modulation Sources

  DeepMind 12 User Manual 8.9.1 MODULATION SOURCES 8.9.2 MODULATION DESTINATIONS The following modulation sources are available: The following modulation destinations are available: Name Description Name Description Pitch Bend Pitch Bend Wheel LFO1 Rate LFO 1 Rate Mod Wheel Modulation Wheel…

• Page 94
  DeepMind 12 User Manual Name Description Name Description 81-92 Fx 1 Params Effects Slot 1 Parameters Env1 DcyCur Envelope 1 Decay Time Curve 93-104 Fx 2 Params Effects Slot 2 Parameters Env1 SuSCur Envelope 1 Sustain Level Curve 105-116 Fx 3 Params…

• Page 95: Effects Reference Guide

  DeepMind 12 User Manual 9. Effects Reference Guide 9.2 Effects Descriptions Here is a list and brief description of the effects available on the DeepMind 12 9.1 Effects Table synthesizer. No Name Description Device Inspiration Type TC Deep Reverb TC-DeepVRB…

• Page 96: Gated Reverb

  DeepMind 12 User Manual Gated Reverb VintageRev This effect was originally achieved by combining a reverb with a noise gate. Vintage Room simulates the reverberation that occurs when sound is recorded in Our gated reverb creates the same impression by a special shaping of the a small room.

• Page 97
  DeepMind 12 User Manual Delay + Chamber Enhancer These Enhancers are so called “Psycho EQs”. They can enhance the signal spectrum in bass, midrange and high frequencies but they differ from traditional Here we have combined Delay and Chamber reverb, so a single device can provide equalizers.
• Page 98
  DeepMind 12 User Manual Rack Amplifier Delay Modelled after the Tech 21 SansAmp, the Stereo / Dual Guitar Amp simulates the sound of plugging into a real guitar amp. From shimmering cleans to saturated crunch, the Stereo / Dual Guitar Amp allows an electric guitar player to sound Stereo Delay provides independent control of left and right delay (echo) times great without using an amp on stage.
• Page 99
  DeepMind 12 User Manual Tel-Ray Delay Chorus Inspired by the original Tel-Ray hardware from the 1960’s using a tuna can, some oil and a motor. It has a very simple set of controls but allows you to create delays, echo, chorus, vibrato and reverb type effects. An incredibly versatile and Chorus samples the input, slightly detunes it and mixes it with the original creative effect which has a lush and unique character.

• Page 100: Rotary Speaker

  100 DeepMind 12 User Manual Phaser a time difference between the wet and dry sound. The LO and HI CUT knobs allow the effected signal to be band-limited. The Dual Pitch effect allows the left and right channels to be adjusted independently, and allows GAIN compensation and panning of the two channels.

• Page 101: Effects Parameters

  101 DeepMind 12 User Manual 9.3 Effects Parameters Note: Effects parameters which appear as modulation destinations are marked with a ‘*’. TC-DeepVRB (TC DEEP REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Preset — — — Options: Ambience, Church, Gate, Hall, Lo Fi, Modulated, Plate, Room, Spring, Tile, Default.

• Page 102
  102 DeepMind 12 User Manual RoomRev (ROOM REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.3 s 28.9 s Controls the amount of time it takes for the reverb to dissipate.
• Page 103
  103 DeepMind 12 User Manual HallRev (HALL REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.2 s 4.9 s Controls the amount of time it takes for the reverb to dissipate.
• Page 104
  104 DeepMind 12 User Manual PlateRev (PLATE REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 0.5 s 10.0 s Controls the amount of time it takes for the reverb to dissipate.
• Page 105
  105 DeepMind 12 User Manual GatedRev (GATED REVERB) DM12 REF PARAMETER UNITS DESCRIPTION PreDelay 200.0 ms Controls the amount of time before the reverb is heard following the source signal. Decay 140.0 ms 1000.0 ms Controls the amount of time it takes for the reverb to dissipate.
• Page 106
  106 DeepMind 12 User Manual ChorusVerb (CHORUS & REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 4.0 Hz Adjusts the rate of the chorus. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Adjusts the modulation depth of the chorus.
• Page 107
  107 DeepMind 12 User Manual FlangeVerb (FLANGER & REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 4.0 Hz Adjusts the rate of the flanger. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Adjusts the modulation depth of the flanger.
• Page 108
  108 DeepMind 12 User Manual Enhancer (ENHANCING EQ) DM12 REF PARAMETER UNITS DESCRIPTION OutGain -12.0 dB 12.0 dB Compensates for changes in level resulting from the effect. Spread 0.0% 100% Emphasizes the stereo content for a wider mix. BassGain 0.0% 100% Adjusts the gain of the bass band.
• Page 109
  109 DeepMind 12 User Manual MulBndDist (MULTIBAND DISTORTION) DM12 REF PARAMETER UNITS DESCRIPTION InputGain -24.0 dB 24.0 dB Controls the amount of input gain applied to the signal. Dist Types — — — Distortion Type: VAL(Valve), SAT(Saturation), TUB (Tube), & Post Filter variants (PFV/PFS/PFT).
• Page 110
  110 DeepMind 12 User Manual EdisonEX1 (STEREO IMAGING) DM12 REF PARAMETER UNITS DESCRIPTION — Allows the effect to be turned On or Off. InMode — Controls the input mode (Stereo or Mid/Side). OutMode — Controls the output mode (Stereo or Mid/Side).
• Page 111
  111 DeepMind 12 User Manual NoiseGate (NOISE GATE) DM12 REF PARAMETER UNITS DESCRIPTION Threshold -50.0 Sets signal level at which gate opens. Range -100.0 Control adjusts the amount of gain reduction applied to the signal below threshold. Attack 20.0 Adjusts time taken for gate to open after an over-threshold signal.
• Page 112
  112 DeepMind 12 User Manual 3TapDelay (3-TAP DELAY) DM12 REF PARAMETER UNITS DESCRIPTION Time 1.0 ms 1500.0 ms Sets the master delay time, and the first stage. Time synchronised options from 4 to 1/64 bars. GainT 0.0% 100% Sets the gain level of the first stage of the delay.
• Page 113
  113 DeepMind 12 User Manual T-RayDelay (TEL-RAY DELAY) DM12 REF PARAMETER UNITS DESCRIPTION 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. Delay 0.0% 100% Adjusts the master delay time. Sustain 0.0% 100% Controls how long the delay is sustained for. Warning at 100% build up will occur.
• Page 114
  114 DeepMind 12 User Manual ModDlyRev (MODULATION/DELAY/REVERB) DM12 REF PARAMETER UNITS DESCRIPTION Time 1.0 ms 1500.0 ms Sets the master delay time. Time synchronised options from 4 to 1/64 bars. Factor — — — Sets the delay to rhythmic fractions (1, 1/2, 2/3, 3/2).
• Page 115
  115 DeepMind 12 User Manual Chorus-D (DIMENSIONAL CHORUS) DM12 REF PARAMETER UNITS DESCRIPTION — Allows the effect to be turned On or Off. Mode — Switches the operation between Mono and Stereo modes. 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
• Page 116
  116 DeepMind 12 User Manual Phaser (STEREO PHASER) DM12 REF PARAMETER UNITS DESCRIPTION Speed 0.0 Hz 5 Hz Sets the modulation speed. Time synchronised options from 4 to 1/64 bars. Depth 0.0% 100% Controls the depth (amount) of modulation. Reso 0.0%…
• Page 117
  117 DeepMind 12 User Manual Dual Pitch (DUAL PITCH SHIFTER) DM12 REF PARAMETER UNITS DESCRIPTION Semi1 — -12.0 12.0 Adjusts the pitch of the first channel in semi-tones. Cent1 — -50.0 50.0 Adjusts the pitch of the first channel in cents.
• Page 118
  118 DeepMind 12 User Manual RotarySpkr (ROTARY SPEAKER) DM12 REF PARAMETER UNITS DESCRIPTION LoSpeed 0.1 Hz 4.0 Hz Adjusts the rotational speed when the Low Speed operation is selected. HiSpeed 2.0 Hz 9.9 Hz Adjusts the rotational speed when the High Speed operation is selected.

• Page 119: Short-Cuts

  In order to speed up programming tasks there are several short-cuts While holding the switch you can use any of the following faders to set the implemented on the DeepMind 12 as listed below. source for the respective parameter: Note: While holding down any of the shortcut switches, the menu will •…

• Page 120
  BANK/UP, BANK/DOWN switches to select the PREVIOUS/NEXT category. • When you load a program, all the physical controls on the DeepMind 12 may not match the position stored in memory. In order to send all the physical positions to the program (rather than moving each individually until you reach the stored value), follow this procedure: With the PROG switch held down, press the WRITE switch.

• Page 121: Applications

  121 DeepMind 12 User Manual 11. Applications On the following pages we present the most useful applications for your DeepMind 12 analog polyphonic synthesizer, using a few practical examples. 11.1 Studio Configuration Example Wi-Fi Connection DeepMind iOS App Footswitch Audio Interface…

• Page 122
  122 DeepMind 12 User Manual 11.2 Live Configuration Example Footswitch Expression Pedal Laptop Computer Mixing console Headphones MIDI Controller Active Loudspeakers…
• Page 123
  123 DeepMind 12 User Manual 11.3 Band/Practice Configuration Example DeepMind iOS App DeepMind iOS App Footswitch Expression Pedal Headphones…
• Page 124
  124 DeepMind 12 User Manual 11.4 Interfacing with Modular Synthesizer Example Gate Modular Synthesizer Mixing console Headphones Active Loudspeakers…
• Page 125
  125 DeepMind 12 User Manual 11.5 Interfacing with Other Hardware Example Sync to another Player Footswitch External Sound Module Expression Pedal Mixing console Headphones MIDI Controller Active Loudspeakers…
• Page 126
  126 DeepMind 12 User Manual 11.6 Poly Chain Example Footswitch Expression Pedal Headphones Mixing console Active Loudspeakers…

• Page 127: Daw Midi Configuration

  Ensure that the relevant interface (MIDI/USB/Wi-Fi) is configured correctly in the GLOBAL-CONNECTIVITY menu. Ensure that the DeepMind 12 is an active input and output in your DAW / Application MIDI setup. Ensure that your DAW is setup to receive MIDI on the same channel as the DeepMind 12 Transmit channel.

• Page 128: System Block Diagram

  128 DeepMind 12 User Manual 13. System Block Diagram…

• Page 129
  129 DeepMind 12 User Manual…

• Page 130: Connection Wiring Diagrams

  130 DeepMind 12 User Manual 14. Connection Wiring Diagrams The DeepMind 12 analog polyphonic synthesizer uses servo-balanced outputs. Headphones Connection Cable Wiring The circuit design has an automatic hum suppression with balanced signals and strain relief clam is able to operate, without problem, even at highest levels. Externally-induced sleeve mains hum etc, is thus efficiently suppressed.

• Page 131: Technical Specifications

  131 DeepMind 12 User Manual 15. Technical Specifications Global Display Backlit LCD Type Class compliant USB 2.0, type B Main Menus PROG, FX, GLOBAL, COMPARE, WRITE Supported operating systems Windows 7 or higher** Mac OS X 10.6.8 or higher Edit Menus…

• Page 132: Midi Commands

  132 DeepMind 12 User Manual 16. MIDI Commands MIDI (Musical Instrument Digital Interface) is a messaging protocol used to transfer or communicate information between devices and/or host computers. 16.1 MIDI Implementation Chart MIDI Implementation Chart v. 2.0 Manufacturer: Behringer Model: DeepMind 12 Version:1.0…

• Page 133
  133 DeepMind 12 User Manual 16.2 Continuous Controller Messages MIDI Implementation Chart v. 2.0 Control Number Information Page 1 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks Bank Select (MSB) —…
• Page 134
  134 DeepMind 12 User Manual MIDI Implementation Chart v. 2.0 Control Number Information Page 2 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks VCA Envelope Decay Curve…
• Page 135
  135 DeepMind 12 User Manual MIDI Implementation Chart v. 2.0 Control Number Information Page 3 of 3 Manufacturer: Behringer Model: DeepMind 12 Version:1.0 Date: 01 September 2016 1. Basic Information Control # Function Transmitted (Y/N) Recognized (Y/N) Remarks Registered Parameter Number(MSB) —…

• Page 136: Midi Nrpn Commands

  Data Entry LSB & MSB messages. Note : The DeepMind 12 treats NPRNs from USB, Wi-Fi & the physical MIDI ports separately i.e. it has a ‘selected NPRN parameter’ for each interface.

• Page 137
  137 DeepMind 12 User Manual 14-bit Parameter Name Range Notes Portamento time 0-255 — Normal (0), Fingered (1), Fixed Rate (2), Fixed Rate Fingered (3), Exponential (4), Exponential Fingered (5), Portamento mode 0-13 Fixed +2 (6), Fixed -2 (7), Fixed +5 (8), Fixed -5 (9), Fixed +12 (10), Fixed -12 (11), Fixed +24 (12), Fixed -24 (13)
• Page 138
  138 DeepMind 12 User Manual 14-bit Parameter Name Range Notes Mod 1 Destination 0-129 See Modulation Matrix Destination List Mod 1 Depth 0-255 -128 (0) to +127 (255) Mod 2 Source 0-22 See Modulation Matrix Source List Mod 2 Destination…

• Page 139: Global Commands

  139 DeepMind 12 User Manual 14-bit Parameter Name Range Notes Up (0), Down (1), Up&Down (2), Up Inv (3), Down Inv (4), Up&Down Inv (5), Up Alt (6), Down Alt (7), Random (8), Arp Mode 0-10 As Played (9), Chord (10)

• Page 140: Midi Sysex Commands

  When an app is connected on an consult the manufacturer. interface, the unit sends out additional SysEx messages such as key down & voice allocation update messages The SysEx implementation of the DeepMind 12 is described in the following APP NOTIFY REQUEST sections: MIDI Bytes Description 19.2.1 Universal System Exclusive Message (Device…

• Page 141
  141 DeepMind 12 User Manual 19.2.3 Bulk Dump Packed Data Format 19.2.4 Dump Messages The bulk dumps listed below all use «Packed MS bit» format data packing so a These messages can be used to request a data dump, and are shown with their raw data set of 7 bytes x 8 bits are transmitted as 8 bytes of 7-bits (MSB is 0 for responses.
• Page 142
  142 DeepMind 12 User Manual GLOBAL PARAMETER DUMP RESPONSE PROGRAM BANK DUMP REQUEST (Response is individual program dump responses in a sequence) MIDI Bytes Description MIDI Bytes Description System Exclusive Start 00, 20, 32 Behringer Manufacturers ID System Exclusive Start…
• Page 143
  143 DeepMind 12 User Manual CALIBRATION DATA DUMP REQUEST MIDI Bytes Description System Exclusive Start 00, 20, 32 Behringer Manufacturers ID DeepMind12 Model ID Device ID ( 0-15 )  Calibration Data Dump Request End of System Exclusive CALIBRATION DATA DUMP RESPONSE…

• Page 144: Firmware Update

  Turn on the POWER switch located on the rear panel. This can be resolved by running the pitch wheel calibration routine found in the The DeepMind 12 operating system will start and you should see the Behringer GLOBAL-SYSTEM SETTINGS-CALIBRATE menu logo in its display.

• Page 145: Bootloader Menu

  This option will reset the global settings. 22.7 7- Reset ALL This option will perform all formatting resetting covered in options 1-5 settings. 22.8 8- EXIT This option will exit the bootloader menu and return the DeepMind 12 to normal operation.

• Page 146: Definition Of Terms

  146 DeepMind 12 User Manual 23. Definition of Terms Clock: A digital waveform typically square which is used as a timing source for other components in a system. This glossary provides an explanation of the symbols, terms and abbreviations Comb Filtering: Removal of signal components using a filter shape with a used in this manual.

• Page 147
  147 DeepMind 12 User Manual Digital Signal Processing (DSP): The numerical manipulation of signals, Gate (Synthesizer): A signal used to trigger an event, such as a note usually with the intention to measure, filter, change, effect, produce or compress or an envelope.
• Page 148
  148 DeepMind 12 User Manual MIDI (Musical Instrument Digital Interface): A technical standard that Partial: Any of the sinusoidal waveforms which form part of a complex tone. describes a protocol, digital interface and connectors and allows a wide variety of…
• Page 149
  149 DeepMind 12 User Manual Resonance: The emphasis/boost of frequencies around the cut-off point just Sync (Oscillator): A function where one oscillator is synchronised to another. before attenuation starts to occur. As resonance increases, it will reach a point The waveform of the slave oscillator is reset whenever the waveform of the where the filter will start to self oscillate, producing a signal even when there is master oscillator restarts.

• Page 150: Appendix 1 — Octave Shifting

  150 DeepMind 12 User Manual 24. Appendix 1 — Octave Shifting +2 OCTAVES +1 OCTAVE DEFAULT -1 OCTAVE -2 OCTAVES (Middle C) DeepMind 12 Keyboard 25. Appendix 2 — ARP/SEQ/LFO Sync Timing ARP/SEQ/LFO SYNC TIMING RATIO DESCRIPTION One bar Half note…

• Page 151: Appendix 3 — Poly Chords

  151 DeepMind 12 User Manual 26. Appendix 3 — Poly Chords The following tables show some of the Poly Chords created automatically by the Poly Chord WIZARD. In this mode, there are four categories (CAT): MAJOR, MINOR, DOM, and DIM. Each category has various TYPES available, and three modifiers (MOD): BASS, SPREAD, and SPREAD2.

• Page 152
  152 DeepMind 12 User Manual 26.1 MODIFIER: NONE CAT: MINOR CAT: MAJOR • TYPE: Various, as shown below • TYPE: Various, as shown below • MOD: NONE • MOD: NONE • ROOT NOTE: Playing C4 • ROOT NOTE: Playing C4…
• Page 153
  153 DeepMind 12 User Manual CAT: DOM C4 DOM 13 • TYPE: Various, as shown below • MOD: NONE • ROOT NOTE: Playing C4 C4 DOM #9#5 C4 DOM 7 C4 DOM 9 CAT: DIM • TYPE: Various, as shown below •…
• Page 154
  154 DeepMind 12 User Manual 26.2 BASS MODIFIER CAT: MINOR CAT: MAJOR • TYPE: Mi • TYPE: Ma • MOD: BASS • MOD: BASS • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: 1 and 2 •…
• Page 155
  155 DeepMind 12 User Manual CAT: DOM CAT: DIM • TYPE: DOM7a • TYPE: DIM • MOD: BASS • MOD: BASS • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: 1 and 2 • NOTE: 1 and 2 •…
• Page 156
  156 DeepMind 12 User Manual 26.3 SPREAD MODIFIER CAT: MINOR CAT: MAJOR • TYPE: Mi • TYPE: Ma • MOD: SPREAD • MOD: SPREAD • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: C and F •…
• Page 157
  157 DeepMind 12 User Manual CAT: DOM CAT: DIM • TYPE: DOM7 • TYPE: DIM • MOD: SPREAD • MOD: SPREAD • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: C and F • NOTE: C and F •…
• Page 158
  158 DeepMind 12 User Manual 26.4 SPREAD2 MODIFIER CAT: MINOR CAT: MAJOR • TYPE: Mi • TYPE: Ma • MOD: SPREAD2 • MOD: SPREAD2 • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: 1, 2, and 3 •…
• Page 159
  159 DeepMind 12 User Manual CAT: DOM CAT: DIM • TYPE: DOM7 • TYPE: DIM • MOD: SPREAD2 • MOD: SPREAD2 • OCT: -1 and +1 • OCT: -1 and +1 • NOTE: 1, 2, and 3 • NOTE: 1, 2, and 3 •…

• Page 160: Appendix 4 — Default Program

  160 DeepMind 12 User Manual 27. Appendix 4 — Default Program 5. Now that this default program is loaded, you can use it for a base from which to create your own programs. It has simple settings, with none of The following screenshots show the settings used for the «Default program»…

• Page 161
  161 DeepMind 12 User Manual Note: Some menus and menu items affect Global parameters rather than OSC 1 MENU (OSC1 EDIT Switch) individual program parameters. When these items are adjusted, the program name will not appear with an asterisk*. ARPEGGIATOR MENU (ARP/SEQ EDIT Switch, page 1)
• Page 162
  162 DeepMind 12 User Manual VOICE MENU (POLY EDIT Switch, page 1) VCA ENVELOPE MENU (ENVELOPES VCA Switch) PITCH MENU (POLY EDIT Switch, page 2) VCF ENVELOPE MENU (ENVELOPES VCF Switch) VCF MENU (VCF EDIT Switch) MOD ENVELOPE MENU (ENVELOPES MOD Switch)

• Page 163: Appendix 5 — Revert To Panel

  3. If you want to save this change, press the WRITE switch. You can also rename the program and save it in another location at this time, instead of writing When you load a program, all the physical controls on the DeepMind 12 may not over the original.

• Page 164
  164 DeepMind 12 User Manual…
• Page 165
  165 DeepMind 12 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION DeepMind 12 MUSIC Group Services NV Inc. Responsible Party Name: 5270 Procyon Street Address: Las Vegas, NV 89118 +1 702 800 8290 Phone Number: DeepMind 12 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B…
• Page 166
  We Hear You…

MANUALSCAT | RU

Вопросы и ответы

У вас есть вопрос о Behringer DeepMind 12, но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Behringer DeepMind 12. Пожалуйста, убедитесь, что вы опишите свои трудности с Behringer DeepMind 12 как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.