Руководство пользователя коммутатора
8
Режим расширенной дальности передачи (Extend)
Детали режима расширенной дальности передачи:
Режим
Статус
Описание
EXTEND 1-8
Default
Порты 1-8: 100M
ON
Порты 1-8: 10M с включённым режимом Extend
EXTEND 9-16
Default
Порты 9-16: 100M
ON
Порты 9-16: 10M с включённым режимом Extend
EXTEND 17-24
*Только для DS-3E0326P-E
Default
Порты 17-24: 100M
ON
Порты 17-24: 10M с включённым режимом Extend
Внимание
1. Для обеспечения режима расширенной передачи, пожалуйста, используйте Ethernet кабель Cat 5e или
выше и настройте скорость и дуплекс удалённого устройства в “Автосогласование“ (“Auto
Negotiation”).
2. Если режим Extend отключён, дальность передачи питания PoE и данных достигает 150м при
использовании Ethernet кабеля серии Cat 5e или выше.
RJ45 порты и SFP комбо-порты
Модель
10/100Мб/с RJ45 порты
10/100/1000Мб/с RJ45 порты
1000Мб/с SFP
комбо-порты
(G1-F/G2-F)
DS-3E0318P-E
16
2
2
DS-3E0326P-E
24
2
2
Примечание:
1. Порты 1-8 имеют высокий приоритет по умолчанию, они обладают преимуществом перед другими
портами при передачи данных.
2. Порты 1-16/24 поддерживают IEEE 802.3af и IEEE 802.3at PoE питание;
3. Когда SFP комбо-порт (G1-F/G2-F) и G1/G2 порт подключены, SFP порт имеет приоритет над G1/G2.
4. Оптические модули не включены в базовую комплектацию устройства. Оптические модули
приобретаются отдельно!
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
16/24-Port 100M Long-Range PoE Switch Quick Start Guide
16/24-Port 100M Long-Range PoE Switch
Quick Start Guide
i
Related Manuals for HIKVISION DS-3E0318P-E/M
Summary of Contents for HIKVISION DS-3E0318P-E/M
-
Page 1
16/24-Port 100M Long-Range PoE Switch Quick Start Guide 16/24-Port 100M Long-Range PoE Switch Quick Start Guide… -
Page 2: Table Of Contents
16/24-Port 100M Long-Range PoE Switch Quick Start Guide TABLE OF CONTENTS Chapter 1 Introduction ………………….. 1 1.1 Overview ……………………..1 1.2 Packing List ……………………..1 1.3 Appearance ……………………..2 1.3.1 Front Panel ……………………2 1.3.2 Rear Panel ……………………4 Chapter 2 Installation ……………………. 5 2.1 Preventive and Cautionary Tips ………………..
-
Page 3
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. -
Page 4
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. -
Page 5
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Applicable Models This manual is applicable to switches below: DS-3E0318P-E/M(B), DS-3E0326P-E/M(B). Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. -
Page 6: Chapter 1 Introduction
PoE switch. DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) switches are reliable, easy to install and maintain, and equipped with rapid switching functions. With multiple access ports, the switches are applicable for access or aggregation and upload of small-scale LAN devices.
-
Page 7: Appearance
16/24-Port 100M Long-Range PoE Switch Quick Start Guide 1.3 Appearance 1.3.1 Front Panel Front panels of DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) are shown as below. Front Panel of DS-3E0318P-E/M(B) Figure 1-1 DS-3E0318P-E/M(B) Front Panel Front Panel of DS-3E0326P-E/M(B) Figure 1-2 DS-3E0326P-E/M(B) Front Panel Indicator Indicators are used to monitor the status of switches.
-
Page 8
Standard up to 100 m, and the speed rate of the port is 100 Mbps. Extend The 9 to 16 ports of DS-3E0318P-E/M(B) and the 17 to 24 DS-3E0318P-E/M(B): Extend (9-16) ports of DS-3E0326P-E/M(B) support network transmission of up to 250 m, and the speed rate of the port is 10 Mbps. -
Page 9: Rear Panel
16/24-Port 100M Long-Range PoE Switch Quick Start Guide 1.3.2 Rear Panel Rear panel of DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) is shown as below. Rear Panel of DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) Figure 1-3 DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) Rear Panel Grounding Terminal The grounding terminal is used to connect to the ground cable to protect the switch from lightning.
-
Page 10: Chapter 2 Installation
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Chapter 2 Installation 2.1 Preventive and Cautionary Tips Before installation, put on anti-static gloves. During the installation, power off your switch. Use the attached power adapter or power cord to connect the switch to power supply. …
-
Page 11: Lightning Protection
Keep at least 1.5 cm vertical distance between each switch while installing it on a rack. 2.3 Installation DS-3E0318P-E/M(B) and DS-3E0326P-E/M(B) switches only support rack installation. Follow the steps below for rack installation. The following panel is the front panel of the switch. For details about the ports, see section Appearance.
-
Page 12: Grounding
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Figure 2-2 Fix Switch to Rack Do not place any heavy object on the switch in case of any incident. Make sure sound cooling and ventilation. 2.4 Grounding Purpose: Grounding is used to quickly release overvoltage and overcurrent induced by lightening for switch, and to protect personal safety.
-
Page 13: Without Grounding Bar
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Figure 2-3 Grounding with Grounding Bar Connect the grounding cable to the grounding system in the equipment room. Do not connect it to a fire main or lightning rod. 2.4.2 Without Grounding Bar If there is no grounding bar but earth is nearby and the grounding body is allowed to be buried, follow the steps below.
-
Page 14
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Figure 2-4 Grounding with Angle Steel If it is not proper to bury the grounding body, an AC-powered Ethernet switch can be grounded by using the PE (Protective Earth) wire of the AC power supply. The prerequisite is that the power cord of the switch should adopt 3-pin cable with protective earth wire, and the AC power supply protective earth wire has been well grounded on the side of distribution room or AC power supply transformer. -
Page 15: Chapter 3 Physical Connection
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Chapter 3 Physical Connection 3.1 Connecting RJ45 Port Use a network cable to connect your switch to the RJ45 port of an opposite end device. The RJ45 port can connect with network camera, IP camera, NVR, switch, etc. Figure 3-1 RJ45 Port Connection 3.2 Connecting 1000M Fiber Optical Port This section uses dual-fiber SFP optical module as an example.
-
Page 16: Checking The Cabling
16/24-Port 100M Long-Range PoE Switch Quick Start Guide Step 3 After powering on your switch, check the status of Link/Act indicator. If the indicator is lit, the link is connected. If the indicator is unlit, the link is disconnected. Check the line, and make sure opposite devices have been started.
-
Page 17
16/24-Port 100M Long-Range PoE Switch Quick Start Guide UD11877B-A…
- Manuals
- Brands
- HIKVISION Manuals
- Switch
- DS-3E0318P-E/B
Manuals and User Guides for HIKVISION DS-3E0318P-E/B. We have 1 HIKVISION DS-3E0318P-E/B manual available for free PDF download: Quick Start Manual
HIKVISION DS-3E0318P-E/M: List of Available Documents
Note for Owners:
Guidesimo.com webproject is not a service center of HIKVISION trademark and does not carries out works for diagnosis and repair of faulty HIKVISION DS-3E0318P-E/M equipment. For quality services, please contact an official service center of HIKVISION company. On our website you can read and download documentation for your HIKVISION DS-3E0318P-E/M device for free and familiarize yourself with the technical specifications of device.
More Switch Devices:
-
NETGEAR FS116P
ProSafe 16-Port Ethernet Switch with 8-Port PoE FS116PStep 2. Connect power Step 3. Check statusOptionalmodem Step 1. Connect equipment FS116POptional routerComputer ServerInternetInstallation GuideOnOffPower LEDActivity (blinking)No link (off)(right LED)10 Mbps linkPort 9-16 LEDs(left LED)100 Mbps linkLess than 7W ofPoE power is available PoE Max. LEDPoE ports are working normally (off)PoE MAX …
FS116P Switch, 2
-
Digikeijs DIGINETHUB DR5097
DR5097 DR5098 DR5099 DIGINETHUB www.digikeijs.com P 1 DR5097 DR5098 DR5099 HANDLEIDING / MANUAL BEDIENUNGSANLEITUNG / MANUEL V1.0 09‐2016 © Copyright 2005 – 2017. The Netherlands. All rights reserved. No informaon, images or any part of this document may be copied without the prior wr …
DIGINETHUB DR5097 Switch, 6
-
TRENDnet TE100-S81FX
User’s Manual 1Preface This manual describes the installation and usage of the compact 8-port fast Ethernet switch with one fiber-optic port. This combination of fiber and TX ports in a compact box delivers the power of 100Mbps switching along with the distance of fiber. The compact size is ideal for using on the desk-top or mounting on the wall. The fiber port accommodates SC type connector. R …
TE100-S81FX Switch, 23
-
ViaSat ArcLight
Technical Manuals Hard Copy Production Specifications Standard Manuals (8-1/2 x 11, 3-Hole Punch) For hard copy, this technical manual should be produced using the following specifications: — Input – Electronic Adobe® Acrobat PDF file — Reproduction method – Digital black and white laser copy machine — Paper media – 8-1/2 x 11 — 60 pound offset white paper, standard 3-hole drill or …
ArcLight Switch, 368
-
red lion SLX SERIES
Note: These instructions are for a typical installation. Refer to the long form installation and management guides found at Red Lion website for full installation and management details. 1. Carefully remove the switch and any accessories from the shipping container and inspect them for damage.Contact Red Lion immediately if any damage is discovered.2. Install the switch to your DIN rail as shown i …
SLX SERIES Switch, 3
Recommended Documentation:
Коммутатор Hikvision DS-3E0318P-E(B)
неуправляемый, монтируемые в стойку, настольный, 1000 Мбит/сек, 100 Мбит/сек, 18 port, SFPx2, PoE, бюджет PoE 230 Вт
подробнее
нет отзывов
Код товара: 4898188