Фольксваген джетта руководство по техническому обслуживанию

Основные технические характеристики (General technical specifications) VW Jetta VI 2014 с мотором 1.4 литра

• Название: Volkswagen Jetta с 2010 Руководство по эксплуатации, ремонту и техническому обслуживанию
• Бензиновые двигатели: CAXA/CAVA TSI 1.4 л (1390 см³) 122-150 л.с./90-110 кВт и CLRA SRE 1.6 л (1595 см³) 105 л.с./77 кВт
• Выпуск с 2010 года
• Серия: «Ремонт Автомобилей»
• Год издания: 2014
• Автор: Коллектив авторов
• Издательство: «Ассоциация независимых издателей»
• Формат: PDF
• Страниц в книге: 404
• Размер: 370.36 МБ
• Язык: Русский
• Количество электросхем: более 30

1. Manuals
2. Brands
3. Volkswagen Manuals
4. Automobile
5. Jetta 2011
6. Service manual

• Page 1
  Service Workshop Manual Jetta 2011 ➤ Jetta Hybrid 2013 ➤ General body repairs, interior Edition 06.2012 Service Department. Technical Information…
• Page 2
  In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed. All rights reserved. No reproduction without prior agreement from publisher. Copyright © 2012 Volkswagen AG, Wolfsburg D3E802C2CFB…

• Page 3: Table Of Contents

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Contents 00 — Technical data ……….. .

• Page 4
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Repairing interior mirror retaining plate ……..
• Page 5
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 11.9 Importers reporting obligation ……….142 70 — Trim, insulation .
• Page 6
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing backrest adjusting lever ……. . 249 Removing and installing lumbar adjustment lever .

• Page 7: Technical Data

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 00 – Technical data Safety information (VRL004837; Edition 06.2012) 1. Safety information…

• Page 8: Safety Measures When Working On Vehicles With A Start-Stop System

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ⇒ “1.1 Safety measures when working on vehicles with a start- stop system”, page 2 ⇒ “1.2 Safety measures when working with pyrotechnic compo‐ nents”, page 3 ⇒…

• Page 9: Safety Measures When Working With Pyrotechnic Components

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Safety measures when working with py‐ rotechnic components Note The following are pyrotechnic components: ♦ Airbag units ♦ Belt tensioner ♦ Belt force limiters (depending on vehicle equipment level) ♦…

• Page 10: Storage, Transportation And Disposal Of Airbag, Belt Tensioner And Battery Isolator Units (Pyrotechnic Components)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ If work is interrupted, the pyrotechnic component must be stored back in its packaging. ♦ Leaving the pyrotechnic component unattended is prohibited. ♦ When connecting restraint system pyrotechnic components, only the person carrying out the work may be inside the vehi‐…

• Page 11: Additional Safety Regulations For Side Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Untriggered pyrotechnic components must be disposed of correctly in the original packaging in accordance with national legislation. Contact your importer if in any doubt.

• Page 12: Safety Regulations For Crash Sensors (Pressure Sensors) For Front Side Airbags

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Repair work on trims is not permissible (upper A-pillar trim, B- pillar trim, C-pillar trim and D-pillar trim). ♦ Ensure proper seating of trims when installing them.

• Page 13: Airbag Deactivation — Country-Specific

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 front passenger airbag deactivation — country-specific ♦ Basic settings of seat occupied recognition control unit must be performed after each repair to front passenger seat in which the seat and/or the backrest was »detached«…

• Page 14
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 The airbag control unit must be renewed: ♦ In the event of a driver/front passenger airbag deployment “though not for airbag generation 9.*, 10.* and 8.R ”…

• Page 15: Checking Airbag Securing Parts After An Accident

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note The “Resistance too high” fault can also be logged in the event ♦ of a cable break. Under normal circumstances, no crash entry is then logged.

• Page 16: Checking Seat Belts

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 1.12 Checking seat belts WARNING The seat belt system must be inspected systematically after every accident! If damage is determined at any of the points to be checked, customer must be informed regarding necessity of changing belts.

• Page 17: Checking Inertia Reel (Locking Mechanism)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 • If either of the types of damage illustrated below (1 and 2) are determined on accident vehicle, renew seat belt complete with belt buckle.

• Page 18: Checking Belt Guide Fittings And Latch Plates

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Checking release mechanism – Release seat belt by pressing button on belt buckle with finger pressure. When belt is slack, latch plate must spring out of belt buckle on its own.

• Page 19: Safety Instructions For Automatically Dimmable Interior Mirror

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 1.20 Safety instructions for automatically dimmable interior mirror WARNING ♦ The mirror glass is made of several layers and contains an electrolyte to achieve the dimming functionality. Be‐…

• Page 20: Repair Instructions

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Repair instructions ⇒ “2.1 Contact corrosion”, page 14 ⇒ “2.2 Routing and securing wires”, page 14 Contact corrosion Contact corrosion can occur if unsuitable fastening elements (screws, bolts, nuts, washers) are used.

• Page 21: Interior Equipment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 68 – Interior equipment Compartments/covers ⇒ “1.1 Removing and installing storage compartment”, page 15 ⇒ “1.2 Removing and installing steering column trim”, page 15 ⇒ “1.3 Removing and installing left dash panel cover on driver side”, page 17…

• Page 22: Jetta 2011 ➤ , Jetta Hybrid

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Note For greater clarity, steering wheel is not shown in figure. Its re‐ moval is not necessary. Removing – Release locking lever of steering wheel positioner.

• Page 23: Removing And Installing Left Dash Panel Cover On Driver Side

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Unscrew 2 bolts -2- (1.5 Nm). Turn steering wheel to gain ac‐ cess to bolts. – Release locking lever of steering wheel positioner. – Detach lower steering column trim -1- from mountings and re‐…

• Page 24: Removing And Installing Glove Compartment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing glove compart‐…

• Page 25
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Disconnect wiring harness from glove compartment light — W6- . – Disconnect wiring harness from glove compartment light switch -E26- . – In vehicles with a key operated switch to deactivate front pas‐…

• Page 26: Removing And Installing Glove Compartment Lock Cylinder

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing glove compart‐ ment lock cylinder Removing Note It is not possible to remove the lock cylinder -1- separately. ♦ The opening button -2- must be replaced.

• Page 27: Removing And Installing Decorative Trim On Glove Compartment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing decorative trim on glove compartment Removing – Remove glove compartment ⇒ page 18 – Remove bolts -1- (1.5 Nm). – Remove decorative trim -3- from glove compartment -2-.

• Page 28: Equipment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Equipment ⇒ “2.1 Removing and installing sun visor”, page 22 ⇒ “2.2 Removing and installing roof grab handle”, page 23 ⇒ “2.3 Removing and installing roof grab handle bracket”,…

• Page 29: Removing And Installing Roof Grab Handle

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing roof grab han‐…

• Page 30
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Alternatively, it is possible to release the clips with a screwdriver. Installing Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary.

• Page 31: Removing And Installing Roof Grab Handle Bracket

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing roof grab han‐ dle bracket Note The figure shows the front left grab handle bracket, the removal and installation of the remaining grab handle brackets is identical.

• Page 32: Centre Console

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Centre console ⇒ “3.1 Removing and installing Basic centre console”, page 26 ⇒ “3.2 Removing and installing Comfort and Highline centre con‐ sole”, page 30 ⇒…

• Page 33
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Unscrew and remove bolt -1- on each side (1.5 Nm). 3. Centre console…
• Page 34
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove trim on each side -2- of centre console in -direction of arrow-. – Unscrew 2 bolts -3- (1.5 Nm). – Remove storage compartment -1- from centre console -2- and, depending on the vehicle equipment, disconnect wiring harnesses.
• Page 35
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove centre console -1- from vehicle in -direction of arrow-. When doing so, disconnect wiring harness from 12 V socket -U5- . Note At this time, the handbrake lever -2- must be in its highest position.

• Page 36: Removing And Installing »Comfort And Highline« Centre Console

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing »Comfort and Highline« centre console Removing – Switch off ignition. Vehicles with automatic gearbox – Move selector lever to position “N”. – Release selector lever cover along with handle from cover ⇒…

• Page 37
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Unscrew and remove bolt -1- on each side (1.5 Nm). 3. Centre console…
• Page 38
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove trim on each side -2- of centre console in -direction of arrow-. – Unscrew 2 bolts -3- (1.5 Nm). – Remove storage compartment -1- from centre console -2- and, depending on the vehicle equipment, disconnect wiring harnesses.
• Page 39
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 »Comfort« centre console – Remove centre console -1- from vehicle in -direction of arrow-. »Highline« centre console – Remove centre console -2- together with air conduit from ve‐…

• Page 40: Removing And Installing Rear Trim Of »Comfort And Highline« Centre Console

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note At this time, the handbrake lever -3- must be in its highest position. ♦ The arm rest can remain installed when removing the centre console.

• Page 41
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 »Comfort« centre console – Unclip trim -1- from centre console -2- using removal wedge -3409- . »Highline« centre console – Unclip inverter with socket 12 V-230 V -U13- -3- from centre console -4- using removal wedge -3409- .

• Page 42: Removing And Installing Rear Trim Bracket Of »Comfort And Highline« Centre Console

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing rear trim brack‐…

• Page 43: Removing And Installing Lid Of Rear Storage Compartment Of »Comfort And Highline« Centre Console

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove bracket -1- from centre console. Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary.

• Page 44: Removing And Installing Centre Console Securing Bracket

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing centre console securing bracket ⇒ “3.6.1 Assembly overview — securing bracket”, page 38 ⇒ “3.6.2 Removing and installing front securing bracket”, page 38 ⇒…

• Page 45
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ ⇒ “3.1 Removing and installing Basic centre console”, page 26 ♦ ⇒ “3.2 Removing and installing Comfort and Highline centre console”, page 30 – Undo 2 nuts -2- (2.0 Nm) and remove securing bracket -1-.
• Page 46
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 3.6.4 Removing and installing support Removing – Switch off ignition. – Remove centre console: ♦ ⇒ “3.1 Removing and installing Basic centre console”, page 26 ♦…

• Page 47: Interior Mirror

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Interior mirror ⇒ “4.1 Assembly overview — interior mirror”, page 41 ⇒ “4.2 Removing and installing interior mirror”, page 44 ⇒ “4.3 Repairing interior mirror retaining plate”, page 50 ⇒…

• Page 48
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 4.1.2 Assembly overview — interior mirror, »with rain sensor« 1 — Retaining plate ❑ Retaining plate for mir‐ ror foot ❑ Glued to windscreen ❑ Repairing interior mirror retaining plate ⇒…
• Page 49
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 4.1.3 Assembly overview — interior mirror, »with rain sensor and front camera« 1 — Retaining plate ❑ Retaining plate for mir‐ ror foot ❑ Glued to windscreen ❑…

• Page 50: Removing And Installing Interior Mirror

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing interior mirror ⇒ “4.2.1 Removing and installing Basic interior mirror”, page 44 ⇒ “4.2.2 Removing and installing interior mirror, with rain sensor ”, page 45…

• Page 51
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 4.2.2 Removing and installing interior mirror, »with rain sensor« Removing Special tools and workshop equipment required ♦ Removal wedge -3409- WARNING ♦ Observe safety instructions for automatically dimmable interior mirror ⇒…
• Page 52
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Detach lower cable guide -4- from catch with retaining plate -1-. – Pull lower cable guide -4- out of trim piece for roof trim -3-.
• Page 53
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. 4.2.3 Removing and installing interior mirror, »with rain sensor and front camera« Removing Special tools and workshop equipment required ♦…
• Page 54
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING ♦ Observe safety instructions for automatically dimmable interior mirror ⇒ page 13 – Switch off ignition. – Using removal wedge -3409- , release fasteners of cover caps -3-.
• Page 55
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Detach connector -5- for rain sensor -6-. – Remove rain sensor -6- from retaining plate -1- in -direction of arrow-. – Detach upper cable guide -2- from catch with retaining plate -1-.

• Page 56: Repairing Interior Mirror Retaining Plate

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Repairing interior mirror retaining plate ⇒ “4.3.1 Repairing interior mirror retaining plate, Basic version”, page 50 ⇒ “4.3.2 Repairing interior mirror retaining plate, with rain sensor ”, page 52…

• Page 57
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Grind off the three spacer protrusions -arrows- on bonding surface. To do this, use sandpaper (360/400 grain) laid on flat surface. – Keep sanded surface clean and free of grease.
• Page 58
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 4.3.2 Repairing interior mirror retaining plate, »with rain sensor« Note With the repair procedure described, it is no longer necessary ♦ to renew the windscreen.

• Page 59: Automatic Anti-Dazzle Interior Mirror — Functional Description

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Press retaining plate -1- into position on prepared windscreen -2- immediately after applying adhesive. – Fix retaining plate -1- in its intended position on ceramic pre- coat surface and secure with adhesive tape.

• Page 60
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Selecting reverse gear switches off the anti-dazzle function. Con‐ sequently, one can, for example, reverse out of a dark garage with the aid of the interior mirror.

• Page 61: Passenger Protection

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 69 – Passenger protection 1. Seat belts…

• Page 62: Seat Belts

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Seat belts ⇒ “1.1 Assembly overview — front three-point seat belt”, page 56 ⇒ “1.2 Assembly overview — rear three-point seat belt”, page 57 ⇒ “1.3 Removing and installing front 3-point seat belt”, page 57 ⇒…

• Page 63: Assembly Overview — Rear Three-Point Seat Belt

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Assembly overview — rear three-point seat belt 1 — Left outside seat belt ❑ Three-point seat belt with belt inertia reel and belt tensioner ❑ The belt is locked in the double belt buckle ⇒…

• Page 64
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Follow disposal regulations for pyrotechnic components ⇒ page 4 – Remove upper B-pillar trim ⇒…
• Page 65
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Disconnect electrical connectors -1- and-2- from belt inertia reel -3-. For all vehicles: – Disconnect electrical connector -1- from belt inertia reel -2-. – Undo bolt -2- (40 Nm) and remove belt anchor -5- from body.
• Page 66
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.
• Page 67
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Ensure electrical connector is pushed fully onto stop and en‐ ♦ gages audibly. If parts of the belt system are removed because of an accident, ♦…

• Page 68: Removing And Installing Rear Outer Three-Point Seat Belt

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Further installation is performed in the reverse order of re‐ moval. WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 69
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Follow disposal regulations for pyrotechnic components ⇒ page 4 – Remove bench seat ⇒…
• Page 70
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Take belt inertia reel -4- together with electrical connector -5- out of upper part of rear wall in -direction of arrow-. Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒…

• Page 71: Removing And Installing Rear Middle Three-Point Seat Belt

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Ensure electrical connector is pushed fully onto stop and en‐ ♦ gages audibly. If parts of the belt system are removed because of an accident, ♦…

• Page 72
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Working from the luggage compartment, remove complete middle seat belt -2- from upper part of rear wall -1- in -direction of arrow-. Rep. gr.69 — Passenger protection…

• Page 73: Removing And Installing Front Belt Height Adjuster

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – If parts of the belt system are removed because of an accident, the belt system securing bolts must be renewed. – Fit three-point seat belt ensuring that anti-rotation tab engages in mounting and tighten bolt (40 Nm).

• Page 74
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note There is no need to remove the belt anchor or anchor rail for seat belt . – Remove bolt -1- (40 Nm) and detach belt guide anchor -2- from belt height adjuster -3-.
• Page 75
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note If parts of the belt system are removed because of an accident, the belt system bolts must be renewed. – Insert belt height adjuster -2- into mountings -3-.
• Page 76
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note For installation of the top B-pillar trim, the belt adjuster slide -4- must be in the uppermost position. In another position, the slide can crack at the rated break point.

• Page 77: Removing And Installing Front Belt Buckle With Belt Switch E24 / E25

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing front belt buck‐ le with belt switch -E24- / -E25- Note Removal and installation is described for left side of vehicle. Fol‐…

• Page 78
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Seat with electrical height adjustment: – Detach wiring harness -1- from seat frame. – Guide wiring harness -1- out of seat wiring harness -2-. – Remove bolt -2- (20 Nm).
• Page 79
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Install in reverse order, but note the following: – Place belt buckle -1- onto mounting -3- in such a way that the dog point -4- together with the belt buckle -1- latches into place.

• Page 80: Removing And Installing Rear Double Belt Buckle

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 81
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Unscrew bolt -1- (40 Nm) and remove double belt buckle -2- from body -3-. Installing – Install in reverse order of removal. 1. Seat belts…

• Page 82: Child Seat Anchors

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Child seat anchors ⇒ “2.1 Points to check”, page 76 ⇒ “2.2 Child seat anchors in rear shelf”, page 76 Points to check ♦ Child seat anchors must be checked for damage and defor‐…

• Page 83: Airbag System

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Airbag system ⇒ “3.1 Airbag system”, page 77 ⇒ “3.2 Adapting components”, page 78 Airbag system 1 — Airbag unit on driver side ❑ Removing and installing ⇒…

• Page 84: Adapting Components

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 10 — Curtain airbag, driver side ❑ Removing and installing ⇒ page 97 11 — Curtain airbag, front pas‐ senger side ❑ Removing and installing ⇒…

• Page 85: Airbag Control Unit

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Airbag control unit ⇒ “4.1 Assembly overview — airbag control unit”, page 79 ⇒ “4.2 Removing and installing airbag control unit J234 ”, page 79…

• Page 86
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove bolt -1- (1.5 Nm). – Remove trim -2- of centre console in -direction of arrow-. Note No further components of the centre console need to be removed.
• Page 87
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove control unit -2- from centre tunnel. Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 88: Driver’s Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Driver’s airbag ⇒ “5.1 Removing and installing driver side airbag igniter N95 ”, page 82 Removing and installing driver side air‐ bag igniter -N95- Note Removal and installation of the airbag unit is described for the ♦…

• Page 89
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.
• Page 90
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 91
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Ensure electrical connector is pushed fully onto stop and engages audibly. ♦ Ensure that no cables are trapped. ♦ WARNING Battery must be connected with ignition switched on. If pyro‐…

• Page 92: Front Passenger Side Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Front passenger side airbag ⇒ “6.1 Advanced Airbag System (only for USA/Canada)”, page 86 ⇒ “6.2 Removing and installing front passenger airbag unit with front passenger side airbag igniter N131 / N132 ”, page 86 ⇒…

• Page 93
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove side dash panel cover ⇒ page 163 – Remove centre A-pillar trim ⇒ page 192 – Remove glove compartment ⇒ page 18 WARNING Before handling pyrotechnic components (e.g.
• Page 94
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Brackets for front passenger airbag unit -1- are clipped onto retaining frame -2-. – Unclip bracket -1- and remove it from retaining frame -2-.
• Page 95
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note If the housing of the front passenger airbag unit -4- is made of plastic, the bolts -3- (9 Nm) must be secured ♦…

• Page 96: Removal And Installation Of Key Operated Switch To Deactivate Front Passenger Airbag E224

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Connect connector to airbag igniter. – Press in connector lock. Doing so, the connector will be fully inserted into airbag igniter and locked at the same time.

• Page 97
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove glove compartment ⇒ page 18 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.

• Page 98: Side Airbags

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Side airbags ⇒ “7.1 Removing and installing front side airbag with side airbag igniter N199 / N200 ”, page 92 ⇒ “7.2 Removing and installing side airbag with rear side airbag igniter N201 / N202 ”, page 94…

• Page 99
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 100: Removing And Installing Side Airbag With Rear Side Airbag Igniter N201 / N202

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 101
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 102
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 103: Curtain Airbags

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Curtain airbags ⇒ “8.1 Removing and installing curtain airbag with curtain airbag igniter N251 / N252 ”, page 97 Removing and installing curtain airbag with curtain airbag igniter -N251- / -…

• Page 104
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.
• Page 105
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Detach clipping lugs -1- and -2- of curtain airbag from body. – Detach retaining clips -4- from body ⇒ page 97 – Unhook front and rear fixing links -3- from body.
• Page 106
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove bolt -1- (4.5 Nm). Note The bolt -1- must be renewed. – Remove clips of -3- of curtain airbag -2- from body. – Detach retaining clips -4- from body ⇒…
• Page 107
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Always follow steps of procedure for installing curtain air‐ bag in the given order.
• Page 108
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 109: Airbag Crash Sensors

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Airbag crash sensors ⇒ “9.1 Removing and installing front airbag crash sensor, driver side G283 (USA)”, page 103 ⇒ “9.2 Front airbag crash sensor, front passenger side G284 (USA)”, page 105…

• Page 110
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Release connector locking mechanism and pull off connector -1- from front airbag crash sensor on driver side -G283- -3-. – Unscrew bolt -2- (4.5 Nm) and remove front airbag crash sen‐…

• Page 111: Front Airbag Crash Sensor, Front Passenger Side G284 (Usa)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Front airbag crash sensor, front passen‐ ger side -G284- (USA) Note Front airbag crash sensor on front passenger side -G284- can be found on the right-hand side of the lock carrier at the front end of the vehicle.

• Page 112: Removing And Installing Side-Airbag Crash Sensor, Driver Side G179

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Insert front airbag crash sensor on driver side -G283- -3- in such a way that lug -arrow A- engages in hole -arrow B-. Note This is the only way to ensure that the front airbag crash sensor on driver side -G283- is installed in the correct position.

• Page 113
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Disconnect battery earth cable with ignition switched on ⇒ Electrical system; Rep. gr. 27 ; Battery; Connecting and dis‐ connecting battery . – Remove front door trim ⇒…
• Page 114
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING For the crash sensor (pressure sensor) to function properly, it is vital to ensure that the door forms an effective seal. WARNING ♦ Follow safety regulations for pyrotechnic components ⇒…
• Page 115
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Further installation is carried out in reverse order of removal. Ob‐ serve the following: Note Ensure electrical connector is pushed fully onto stop and engages audibly.

• Page 116: Removing And Installing Side-Airbag Crash Sensor, Front Passenger Side G180

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note If airbag warning lamp -K75- indicates a fault following installation, event memory must be read, deleted and read again ⇒ Vehicle diagnostic tester. Removing and installing side-airbag…

• Page 117
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Disconnect battery earth cable with ignition switched on ⇒ Electrical system; Rep. gr. 27 ; Battery; Connecting and dis‐ connecting battery . – Remove bench seat ⇒…
• Page 118
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 119: Removing And Installing Rear Side-Airbag Crash Sensor, Front Passenger Side G257

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Ensure electrical connector is pushed fully onto stop and engages audibly. ♦ Ensure that no cables are trapped. ♦ WARNING Battery must be connected with ignition switched on. If pyro‐…

• Page 120: Seat Belt Verification

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Seat belt verification ⇒ “10.1 Removing and installing seat occupied sensor, front pas‐ senger side G128 ”, page 114 ⇒ “10.2 Removing and installing seat occupied sensor, front pas‐…

• Page 121
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Vehicles without height adjustment – Remove left trim on seat without adjustable seat height ⇒ page 250 – Remove front seat bar ⇒ page 259 Vehicles with manually adjustable seat –…
• Page 122
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 123
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Hold the aligned sensor -2- in place with your right hand. Pull of adhesive strip -3- and glue sensor into foam recess. – Pull off adhesive strip -1- and glue wiring harness into foam recess.

• Page 124: Removing And Installing Seat Occupied Sensor, Front Passenger Side G128 , As Of Model Year 2012

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Further installation is carried out in reverse order of removal. Ob‐ serve the following: – After installation, carry out a function check with ignition switched on.

• Page 125
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal lever -80 — 200- Note The seat occupied sensor, front passenger side -G128- is only ♦ installed in the front passenger seat. The seat occupied sensor for front passenger side -G128- has ♦…
• Page 126
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Vehicles without height adjustment – Remove left trim on seat without adjustable seat height ⇒ page 250 – Remove front seat bar ⇒ page 259 Vehicles with manually adjustable seat –…
• Page 127
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 128
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Place cover with front seat cushion -1- onto seat frame -2- and align. Further installation ist carried out in reverse order of removal. Observe the following: –…
• Page 129
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 130: Seat Occupied Recognition (Usa)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Seat occupied recognition (USA) ⇒ “11.1 Safety precautions for when working on seat occupied recognition”, page 124 ⇒ “11.2 Procedure after an accident when belt tensioner and/or airbag was triggered”, page 124…

• Page 131: Assembly Overview — Front Seat «Basic

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 carried out with the vehicle diagnosis and service information system -VAS 5052 A- . ♦ If the seat rail and/or seat pan are renewed after an accident due to deformation, the pressure sensor for seat occupied recognition -G452- must be renewed.

• Page 132
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ❑ Before gluing, positioning aids must be aligned with the positioning aids of the front seat cushion padding ⇒ Item 3 (page 125) 5 — Pressure sensor for seat occupied recognition -G452- ❑…

• Page 133: Assembly Overview — Front Seat «Comfort

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 11.4 Assembly overview — front seat “Comfort” 1 — Wiring harness ❑ Wiring harness with connector for pressure sensor for seat occu‐ pied recognition -G452- ❑…

• Page 134: Assembly Overview — Front Seat «Sport

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ❑ Clipped onto seat frame ❑ Removing and installing ⇒ page 141 9 — Seat occupied recognition control unit -J706- ❑ Can be diagnosed ❑ The necessity for replacement of the seat occupied recognition control unit -J706- does not mean that the pressure sensor for seat occupied recognition -G452- has to be replaced as well.

• Page 135
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 occupied recognition — G452- ❑ Before gluing, positioning aids must be aligned with the positioning aids of the front seat cushion padding ⇒ Item 3 (page 128) 5 — Pressure sensor for seat occupied recognition -G452- ❑…

• Page 136: Removing And Installing Pressure Sensor For Seat Occupied Recognition G452

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 11.6 Removing and installing pressure sen‐ sor for seat occupied recognition -G452- Note It is only permissible to renew pressure sensor for seat occu‐ ♦…

• Page 137
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Disconnect connector -4- for pressure sensor -2- from seat occupied recognition control unit -J706- -3-. – Disconnect wiring harness -5- for pressure sensor from seat frame.
• Page 138
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Removed components are to be separated from each other and disposed of separately from each other so ♦ that they are not accidentally re-installed.
• Page 139
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 140
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note The pressure sensor for seat occupied recognition -G452- ♦ must be positioned without kinks. After seat occupied recognition has been renewed, vehicle di‐ ♦…
• Page 141
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Lightly press pressure sensor into front “channel transitions”, while aligning it to the seat padding. – Remove protective film -1- of front side position adhesive -2- and affix pressure sensor, applying slight pressure and avoid‐…
• Page 142
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Lightly press pressure sensor into rear “channel transitions”, while aligning it to the seat padding. – Remove protective film -5- of rear side position adhesive -1- and affix pressure sensor, applying slight pressure and avoid‐…
• Page 143
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Feed wiring harness -1- through opening in seat padding -2- and attach it in anchoring channel -3-. Note It must be ensured that the entire wiring harness -1- is routed straight through the seat padding -2- and that there are no cable loops in the anchoring channel -3- after installation.
• Page 144
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Attach wiring harness of pressure sensor -4- to seat frame -3- and fix in place as shown. Rep. gr.69 — Passenger protection…

• Page 145: Removing And Installing Seat Occupied Recognition Control Unit J706

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Connect connector -1- of wiring harness -4- to seat occupied recognition control unit -J706- -2-. Note Ensure electrical connector is pushed fully onto stop and engages audibly.

• Page 146
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 147: Removing And Installing Bracket Of Seat Occupied Recognition Control Unit J706

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 148: Importers Reporting Obligation

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. 11.9 Importers reporting obligation Following the installation of new components of the seat occupied recognition system ( pressure sensor for seat occupied recogni‐…

• Page 149
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 → Deactivation of airbag units/child seat, seat installation etc. → Appendix 2 In the “Technical Service Handbook 2”, the “Process ID” or the “technical solution number” for this procedure is “2022327/1”.

• Page 150: Trim, Insulation

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 70 – Trim, insulation Door trims ⇒ “1.2 Removing and installing driver door trim”, page 145 ⇒ “1.3 Removing and installing front passenger door trim”, page 149 ⇒…

• Page 151: Removing And Installing Driver Door Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Pop rivet pliers -VAS 5072- ♦ Torque wrench -V.A.G 1783- Removing and installing driver door trim Special tools and workshop equipment required ♦ Removal wedge -3409- ♦…

• Page 152
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Switch off ignition. – Lever upper part of handle recess -3- upwards out of mount‐ ings in door trim -2- in -direction of arrow-, using the removal wedge -3409- to do so.
• Page 153
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Prize lower part of handle recess -1- out of catches -2- and -3- of door trim -4- in -direction of arrow-, using removal wedge -3409- to do so.
• Page 154
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Release retaining clips -6- of door trim -3- in lower area from mountings, using wedges -T10383- . – Release retaining clips -6- of door trim -3- at sides from mount‐…

• Page 155: Removing And Installing Front Passenger Door Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Caution Before installing door trim, ensure that the locking mechanisms of all clips are in -position 1-. It is not possible to install the door trim without problem if clips…

• Page 156
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- ♦ Wedges -T10383- ♦ Torque wrench -V.A.G 1783- Removing – Switch off ignition. – Lever upper part of handle recess -4- upwards out of mount‐…
• Page 157
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Prize lower part of handle recess -1- out of catches -2- and -3- of door trim, using removal wedge -3409- to do so. – Undo bolts -6- in area of handle recess and upper door trim (4 Nm).
• Page 158
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Release retaining clips -3- of door trim -4- in lower area from mountings, using wedges -T10383- . – Release retaining clips -3- of door trim -4- at sides from mount‐…

• Page 159: Removing And Installing Front Door Trim Bracket

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Caution Before installing door trim, ensure that the locking mechanisms of all clips are in -position 1-. It is not possible to install the door trim without problem if clips…

• Page 160
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Pop rivet pliers -VAS 5072- ♦ Torque wrench -V.A.G 1783- Removing – Remove front door trim on driver side ⇒ page 145 – Drill open blind rivets -2- and remove securing bracket -1- from door.

• Page 161: Removing And Installing Rear Door Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Rivet on securing bracket, using riveting tongs -VAS 5072- and blind rivets. 1.4.1 Installing Removing and installing rear door trim Note Removal and installation of trim is described for the left rear door.

• Page 162
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- ♦ Wedges -T10383- ♦ Torque wrench -V.A.G 1783- Removing – Switch off ignition. – Lever upper part of handle recess -3- upwards out of mount‐…
• Page 163
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Undo bolts -4- in area of handle recess and upper door trim (4 Nm). – Remove bolt -5- (2 Nm). – Release retaining clips -6- of door trim -3- in lower area from mountings, using wedges -T10383- .
• Page 164
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Caution Before installing door trim, ensure that the locking mechanisms of all clips are in -position 1-.

• Page 165: Removing And Installing Rear Door Trim Bracket

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing rear door trim bracket Note Removal and installation of rear door trim bracket is described on the driver side. Removal and installation on the right vehicle side are analogous.

• Page 166
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Pop rivet pliers -VAS 5072- Removing – Remove rear door trim ⇒ page 155 – Drill open blind rivets -2- and remove securing bracket -1- from door.

• Page 167: Removing And Installing Front Inner Mirror Cover

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Rivet on securing bracket, using riveting tongs -VAS 5072- and blind rivets. Removing and installing front inner mir‐ ror cover Note Removal and installation are described for the left vehicle side.

• Page 168
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Rep. gr.70 — Trim, insulation…

• Page 169: Dash Panel

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Dash panel ⇒ “2.1 Removing and installing covers on side of dash panel”, page 163 ⇒ “2.2 Removing and installing dash panel insert trim, with left and middle dash panel vents”, page 164…

• Page 170: Removing And Installing Dash Panel Insert Trim, With Left And Middle Dash Panel Vents

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing dash panel in‐…

• Page 171
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Switch off ignition. – Remove middle dash panel trim ⇒ page 168 – Move steering wheel to lowest position.

• Page 172: Removing And Installing Dash Panel Vents On Right

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing dash panel…

• Page 173
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Using removal wedge -3409- , release the upper and lower catches of the right vent -arrows- and pull out a little.

• Page 174: Removing And Installing Left Decorative Trim Panel On Driver Side

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing left decorative trim panel on driver side Special tools and workshop equipment required ♦…

• Page 175
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Prise trim in middle of dash panel -2- out of fasteners in dash panel -1-, using removal wedge -3409- (insert wedge close to fastener).

• Page 176: Removing And Installing Trim In Middle Of Dash Panel (Vehicles With Climatronic)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing trim in middle of dash panel (vehicles with Climatronic) Special tools and workshop equipment required ♦…

• Page 177: Removing And Installing Dash Panel

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing dash panel Special tools and workshop equipment required 2.

• Page 178
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Move front seats to rearmost position and tilt backrests by 45°. WARNING ♦ Follow safety regulations for pyrotechnic components ⇒…
• Page 179
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove windscreen wiper switch -E- . ⇒ Electrical system; Rep. gr. 94 ; Steering column switch; Removing and installing windscreen wiper switch -E- – Remove dash panel insert ⇒ Electrical system; Rep. gr. 90 ;…
• Page 180
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Undo bolts -2- and -3- from dash panel -1- (1.5 Nm). Note Prior to installing bolts -3-, ensure that the bushes are inserted in dash panel mounting.
• Page 181
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.
• Page 182
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Pull dash panel -2- out of mountings at overlap to windscreen and from dash panel central tube -1-. – Depending on the vehicle’s equipment, disconnect the corre‐…
• Page 183
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note Before installing, check all fasteners for damage and renew if necessary. – Before installing dash panel, check whether the mountings -1- are firmly attached to the stud bolts -2-.
• Page 184
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – With the aid of as second mechanic place dash panel -1- onto dash panel central tube -1- so that a perfect fit is achieved.
• Page 185
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 186: Deformation Elements For Dash Panel Usa

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 187: Aligning Dash Panel In Vehicle

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Take deformation element -2- off dash panel. Front passenger side deformation element – Remove glove compartment ⇒ page 18 – Remove bolts -2- (1.5 Nm).

• Page 188
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Only undo bolts -1- and -2- 2 to 3 turns (20 Nm). – Only undo bolts -1- 2 to 3 turns (20 Nm). – Undo nuts -1- and nuts -4- 2 to 3 turns (20 Nm).
• Page 189
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – After aligning dash panel in vehicle, fasten it in place, tighten‐ ing bolts to specified torques. Installation of parts is carried out in reverse order of removal.

• Page 190: Dash Panel Central Tube

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Dash panel central tube ⇒ “3.1 Assembly overview — dash panel central tube”, page 184 ⇒ “3.2 Removing and installing dash panel central tube”, page 185 ⇒…

• Page 191: Removing And Installing Dash Panel Central Tube

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 9 — Bolt ❑ Bolt of dash panel central tube to middle tunnel ❑ Qty. 2 ❑ Specified torque 20 Nm. 10 — Threaded plate ❑…

• Page 192
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing – Disconnect battery earth cable with ignition switched on ⇒ Electrical system; Rep. gr. 27 ; Battery; Connecting and dis‐ connecting battery . – Removing dash panel ⇒…
• Page 193
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Detach steering column from cross member. ⇒ Running gear, axles, steering; Rep. gr. 48 ; Steering column and steering wheel; Assembly overview — steering column, left-hand drive vehicles .
• Page 194
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Undo nuts -1- on driver side (20 Nm). Note In area of nuts -2- and locating pin-3-, use a scriber to mark ver‐ tical and horizontal position of cross member -1- in vehicle.

• Page 195: Removing And Installing Bracket For Dash Panel Central Tube, Lhd Vehicles

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before bolting dash panel cross member in place, align it using ♦ marks made during removal.

• Page 196
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove driver side bracket -2- from inside of A-pillar -4-. Bracket on front passenger side: – Unscrew bolts -1- (20 Nm). – Remove front passenger side bracket -4- from inside of A-pillar -2-.

• Page 197: Interior Trims

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Interior trims ⇒ “4.1 Removing and installing upper A-pillar trim”, page 191 ⇒ “4.2 Removing and installing centre A-pillar trim”, page 192 ⇒ “4.3 Removing and installing lower A-pillar trim on driver side”, page 194 ⇒…

• Page 198: Removing And Installing Centre A-Pillar Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 199
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Remove dash panel end covers ⇒ page 163 – Release trim -2- from door seal beading. – Release retaining clip -1-, using removal wedge -3409- .

• Page 200: Removing And Installing Lower A-Pillar Trim On Driver Side

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 201: Removing And Installing Lower A-Pillar Trim On Front Passenger Side

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 202
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Release sill panel moulding from body in area of overlap to lower trim of A-pillar ⇒ page 206 – Remove dash panel end covers ⇒…

• Page 203: Releasing And Securing Upper B-Pillar Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 204
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Securing Note Before installing, check all fasteners for damage and renew if necessary. ♦ When installing, the belt adjuster slide and the button of the trim must be in the same position.

• Page 205: Removing And Installing Upper B-Pillar Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing upper B-pillar trim Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.

• Page 206
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Remove »Airbag« emblem -1- and unscrew and remove bolt -3- (4 Nm). – Pull retaining clips -4- of trim -1- in lower area out of mountings in body -direction of arrow-.
• Page 207
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove bolt -1- (40 Nm). – Thread belt end anchor together with seat belt -2- through the hole in the trim. Installing Note Before installing, check all fasteners for damage and renew if necessary.

• Page 208: Removing And Installing Lower B-Pillar Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing lower B-pillar trim Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.

• Page 209
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Switch off ignition if vehicle has interior monitoring system. – Remove sill strip ⇒ page 206 – Detach upper B-pillar trim ⇒…

• Page 210: Removing And Installing C-Pillar Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 211
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- Removing – Remove wheel housing trim: ♦ Remove wheel housing trim without side airbag ⇒ page 209 ♦ Remove wheel housing trim with side airbag ⇒…

• Page 212: Removing And Installing Sill Moulding

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that trim is positioned in door ♦…

• Page 213
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Wedges -T10383- ♦ Removal wedge -3409- Removing – Remove wheel housing trim: ♦ Remove wheel housing trim without side airbag ⇒ page 208 ♦ Remove wheel housing trim with side airbag ⇒…

• Page 214: Removing And Installing Wheel Housing Trim For Vehicles With Side Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 4.10 Removing and installing wheel housing…

• Page 215: Removing And Installing Wheel Housing Trim For Vehicles Without Side Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Release clips -3- from body flange. – Pull wheel housing trim -2- out of mounts in sill moulding -4- in direction of -arrow-. Installing Install in reverse order of removal.

• Page 216
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Special tools and workshop equipment required ♦ Removal wedge -3409- Removing – Remove bench seat ⇒ page 270 – Fold backrest forwards. – Remove nut -6- (8 Nm).

• Page 217: Removing And Installing Rear Shelf

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 4.12 Removing and installing rear shelf Removing –…

• Page 218
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove belt end anchor -2- from fastening buckle -3- on both sides – Remove retaining clips -3-. – Unclip retaining clips -2-. To do this, pull front area of rear shelf -1- upwards in -direction of arrow-.

• Page 219: Removing And Installing Rear Shelf Usa

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Take outer left and right belt end anchors out of side belt guides of rear shelf. – Take middle seat belt out of cut-out -arrow C- of rear shelf.

• Page 220
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Pull rear shelf -4- in direction of travel -arrow A- until guide pins -1- emerge from guides in body -arrow B-. – Detach connector -3- of bulb for high-level brake light -M25- -2-.
• Page 221
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 4. Interior trims…

• Page 222: Luggage Compartment Trims

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Luggage compartment trims ⇒ “5.1 Removing and installing luggage compartment floor cov‐ ering”, page 216 ⇒ “5.2 Removing and installing luggage compartment floor cov‐ ering, hybrid vehicles”, page 217 ⇒…

• Page 223: Removing And Installing Luggage Compartment Floor Covering, Hybrid Vehicles

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Removing and installing luggage com‐ partment floor covering, hybrid vehicles Removing – Remove luggage compartment floor covering -1- from luggage compartment in -direction of arrow-.

• Page 224: Removing And Installing Rear Panel Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Removing and installing rear panel trim Special tools and workshop equipment required ♦ Removal wedge -3409- Removing –…

• Page 225
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note In case of hybrid vehicles remove luggage compartment floor covering ⇒ page 217 – Release left and right retaining clips -2- in -direction of arrow C- using removing wedge -3409- .

• Page 226: Removing And Installing High-Voltage Battery Cover, Hybrid Vehicles

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that lock carrier cover is posi‐ ♦ tioned in rear lid seal beading.

• Page 227
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Fold down rear backrest completely. – Remove caps -2-. – Unscrew bolts -3- (3.5 Nm). – Remove bracket -4- from cover. – Remove high-voltage battery cover -1- from luggage compart‐…

• Page 228: Removing And Installing Side Panel Trim In Luggage Compartment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing: – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing side panel trim…

• Page 229
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Release tool -T10236- Removing – Switch off ignition. – Remove luggage compartment floor covering ⇒ page 216 – Remove backrest ⇒ page 271 – Remove rear lock carrier cover ⇒…

• Page 230: Removing And Installing Side Panel Trim In Luggage Compartment, Hybrid Vehicles

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that luggage compartment trim ♦…

• Page 231
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Special tools and workshop equipment required ♦ Release tool -T10236- Removing – Switch off ignition. – Remove luggage compartment floor covering (hybrid vehicles) ⇒ page 216 –…
• Page 232
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing right side panel trim in luggage compartment: – Remove right backrest ⇒ page 271 – Remove retaining clips -1-. – Pull trim -2- off in -direction of arrow-. While doing so, remove trim from rear lid seal beading.

• Page 233: Removing And Installing Rear Lid Trim

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if ♦ necessary. Following installation, ensure that luggage compartment trim ♦…

• Page 234
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Wedges -T10383- ♦ Torque wrench -V.A.G 1783- Removing – Remove bolts -2- from closure recesses (2 Nm). – Release retaining clips -4- of trim -3- out of mountings in rear lid, using wedges -T10383- .
• Page 235
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 5. Luggage compartment trims…

• Page 236: Roof Trims

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Roof trims ⇒ “6.1 Detaching and fastening moulded headliner”, page 230 ⇒ “6.2 Removing and installing moulded headlining”, page 233 ⇒ “6.3 Removing and installing insulation/roof reinforcements”, page 238 Detaching and fastening moulded head‐…

• Page 237
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove hand holds on left and right sides of roof ⇒ page 23 – Undo bolts -4- (2 Nm) from retaining frame. – Carefully unlatch retaining clips -3- from rear roof cross mem‐…
• Page 238
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Using release lever -T10039- , detach frame -1- from all round the moulded headlining -2-. – Undo bolts -5- (2 Nm) from retaining frame.

• Page 239: Removing And Installing Moulded Headlining

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing moulded head‐ lining Special tools and workshop equipment required ♦ Removal wedge -3409- ♦…

• Page 240
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove upper left and right A-pillar trim ⇒ page 191 – Remove upper left and right B-pillar trim ⇒ page 197 – Remove left and right C-pillar trim ⇒…
• Page 241
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Models with sliding/tilting sunroof – Push wedge -T10039/1- between frame -1- and moulded headlining -2-. – Using release lever -T10039- , detach frame -1- from all round the moulded headlining -2-.
• Page 242
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 All vehicles – Detach moulded headliner -1- from door seal beading and lower. – Swivel moulded headliner -1- and take it out of the vehicle carefully through the right rear door.
• Page 243
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 6. Roof trims…

• Page 244: Removing And Installing Insulation/Roof Reinforcements

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing insulation/roof reinforcements Rep. gr.70 — Trim, insulation…

• Page 245
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Electric cutter -V.A.G 1561 A- ♦ Cutting blade -V.A.G 1561/20- ♦ Cartridge gun -V.A.G 1628- ♦ Release lever -T10039 — ♦ Removal wedge -T10039 /1- ♦…
• Page 246
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note If paint structure has been damaged on removal of the insulation/roof reinforcements, repair paint damage according to guidelines of ⇒ Paint workshop manual .
• Page 247
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note Observe adhesive processing instructions when installing insu‐ lation/roof reinforcements. – Use hand-cartridge gun -V.A.G 1628- to apply single-compo‐ nent assembly adhesive -D 190 MKD A3- to roof insulation/ reinforcements -1- and -2-.
• Page 248
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Models with sliding/tilting sunroof – Use hand-cartridge gun -V.A.G 1628- to apply single-compo‐ nent assembly adhesive -D 190 MKD A3- to roof insulation/ reinforcements -1-.
• Page 249
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 6. Roof trims…

• Page 250: Seat Frames

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 72 – Seat frames Front seats ⇒ “1.1 Removing and installing front seat”, page 244 ⇒ “1.2 Removing and installing backrest adjusting lever”, page 249 ⇒…

• Page 251: Jetta 2011 ➤ , Jetta Hybrid

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Airbag adapter -VAS 6282- ♦ Torque wrench -V.A.G 1331- Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electrically discharge”…

• Page 252
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electri‐ cally discharge” himself/herself. To do this e.g. briefly touch the door striker plate.
• Page 253
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.
• Page 254
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING If, when installing a seat a thread in seat cross member mount‐ ing plate is damaged, reworking damaged threads is prohibi‐ ted! In this case, the seat cross member mounting plate must be replaced.

• Page 255: Removing And Installing Backrest Adjusting Lever

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note If airbag warning lamp -K75- indicates a fault following installation, event memory must be read, deleted and read again ⇒ Vehicle diagnostic tester. Removing and installing backrest ad‐…

• Page 256: Removing And Installing Lumbar Adjustment Lever

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Pull backrest adjusting lever off -1-. Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary.

• Page 257
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Undo bolts -2- of trim -1- (3 Nm). – Remove spreader clip -3- of trim -1-. – Release retaining clips -4- of trim -1- from seat frame -2-.

• Page 258: Removing And Installing Left Trim On Seat With Manual Height Adjustment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing left trim on seat…

• Page 259
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Pull height adjustment handle -3- upwards and press metal tab of retaining clip -1- inwards using a small screwdriver. Pull height adjustment handle -3- off adjusting lever -2-.

• Page 260: Removing And Installing Left Trim On Seat With Electrical Height Adjustment

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing left trim on seat…

• Page 261
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Switch off ignition. – Remove spreader clip -3- of trim -2-. – Remove trim -6- from retaining hoop -2-.
• Page 262
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Renewing trim: Note If the trim on left of seat -8- is replaced, the seat adjustment switch -7- and the switch for height adjustment of the lumbar support -4- have to be removed and reinstalled.

• Page 263: Removing And Installing Right Trim On Seat

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing right trim on seat Note Removal and installation is described for the left seat. Apply the same instructions for removal and installation of the right seat as appropriate.

• Page 264: Removing And Installing Front Seat Drawer Together With Mounting

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing front seat draw‐ er together with mounting Note Removal and installation is described for the left seat. Apply the same instructions for removal and installation of the right seat as appropriate.

• Page 265: Removing And Installing Front Seat Bar And Operating Lever

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing front seat bar…

• Page 266: Removing And Installing Bar Of Electrically Adjustable Seat

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Remove left trim on seat with manually adjustable seat height ⇒ page 252 – Undo bolts -1- (8 Nm) and remove control lever -2- from seat frame.

• Page 267
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Switch off ignition. – Remove left trim on seat with electric height adjuster ⇒ page 254 – Remove bolt -3- (7.5 Nm).

• Page 268: Removing And Installing Head Restraint Guides

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 1.11 Removing and installing head restraint…

• Page 269: Removing And Installing Backrest

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. 1.12 Removing and installing backrest Note Removal and installation is described for the left seat. Apply the same instructions for removal and installation of the right seat as appropriate.

• Page 270
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1331- Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electrically discharge”…

• Page 271: Removing And Installing Manually Adjustable Lumbar Support Frame

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Carry out following work: – Install in reverse order of removal. WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 272
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Special tools and workshop equipment required ♦ Torque wrench -V.A.G 1783- Removing – Mount seat repair stand -VAS 6136- on engine and gearbox support -VAS 6095- .

• Page 273: Removing And Installing Fire Extinguisher Holder

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 1.14 Removing and installing fire extinguish‐…

• Page 274: Removing And Installing Fire Extinguisher Holder On Seat Frame

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Torque wrench -V.A.G 1783- Removing – Remove fire extinguisher – Unscrew bolts -1- (5 Nm). – Remove fire-extinguisher holder -2- from bracket -3- on seat frame.

• Page 275: Removing And Installing Drive For Backrest Adjustment (Electrically Adjustable Seat)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Remove fire-extinguisher holder -2- from seat frame. Installing – Place bracket -2- on seat frame. – Insert new pop rivets -1- and rivet with pop rivet pliers -VAS 5072- .

• Page 276: Rear Seats

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Rear seats ⇒ “2.1 Removing and installing rear bench seat”, page 270 ⇒ “2.2 Removing and installing rear seat backrest”, page 271 ⇒ “2.3 Removing and installing backrest release mechanism”, page 274 ⇒…

• Page 277: Removing And Installing Rear Seat Backrest

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Install in reverse order, but note the following: – Check body apertures -arrow- for deformation. – Repair any deformation using a plastic head hammer.

• Page 278
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Undo bolt -3- (9 Nm) and remove retaining clamp -4-. – Working from luggage compartment, unlock the wider back‐ rest section -1- (2/3) and fold it down.
• Page 279
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note During installation, it must be ensured that a guide sleeve -4- is in each of the two backrest frames -1- and -2- before backrest is mounted onto bolt -5-.

• Page 280: Removing And Installing Backrest Release Mechanism

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Further installation is performed in the reverse order of re‐ moval. Removing and installing backrest re‐ lease mechanism Removing – Remove rear shelf ⇒ page 211 –…

• Page 281: Removing And Installing Side Padding With Side Airbag

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Removing and installing side padding…

• Page 282
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electrically discharge”…
• Page 283
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Install in reverse order, but note the following: WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling them must ensure that he/she is “electrically discharged”.

• Page 284: Removing Head Restraint Guides

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 WARNING Battery must be connected with ignition switched on. If pyro‐ technic components (e.g. airbag, seat belt tensioners) are repaired incorrectly, undesired triggering may occur after the battery is connected.

• Page 285
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. 2. Rear seats…

• Page 286: Seat — Padding, Covers

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 74 – Seat — padding, covers Front seat covers and padding ⇒ “1.1 Removing and installing seat pan cover and padding”, page ⇒ “1.2 Removing and installing backrest cover and padding”,…

• Page 287
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Seat repair stand -VAS 6136- ♦ Upholstery clip pliers -V.A.G 1634- ♦ Awl -V.A.G 1636A- Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒…
• Page 288
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Vehicles with manually adjustable seat – Remove left trim on seat: ♦ Left trim on seat without adjustable seat height ⇒ page 250 ♦ Left trim on seat with manually adjustable seat height ⇒…
• Page 289
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Roll outer edges of cover -1- upwards in -direction of arrow- off the padding of front seat cushion -2-. – Detach the anchoring pins of the cover -1- from their mount‐…
• Page 290
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Vehicles with seat occupied recognition and seat heater WARNING The seat occupied sensor, front passenger side -G128- -1- or the pressure sensor for seat occupied recognition -G452- -4-…
• Page 291
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Installing pressure sensor for seat occupied recognition — G452- ⇒ page 130 Installing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦…

• Page 292: Removing And Installing Backrest Cover And Padding

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Further assembly is performed in reverse order of removal. Removing and installing backrest cover and padding Note Removal and installation is described for the left seat. Apply the same instructions for removal and installation of right seat com‐…

• Page 293
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal pliers -3392- ♦ Engine and gearbox support -VAS 6095- ♦ Seat repair stand -VAS 6136- ♦ Upholstery clip pliers -V.A.G 1634- 1. Front seat covers and padding…
• Page 294
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Awl -V.A.G 1636A- Removing WARNING ♦ Follow safety regulations for pyrotechnic components ⇒ page 1 ♦ Before handling pyrotechnic components (e.g. separating the electrical connector), the person handling them must “electrically discharge”…
• Page 295
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Press down padding by head restraint guide -arrow-. – Press lug of head restraint guide -arrow- onto stop using re‐ moval wedge -3409- .
• Page 296
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Roll backrest cover -1- upwards a little. – Unhook clamping wire -5- from backrest frame on left and right. – Remove cover padding clips -1- on padding -4- alternately and release cover clip retainer -1- from mountings in padding -2- using a small screwdriver.
• Page 297
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Vehicles with seat heating Note If on models with seat heating the padding -1- or backrest heater element -2- are defective, always replace both elements.
• Page 298
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Clip cover -1- in area of anchoring pins -4- to padding -5-. – Fasten cover -1- to padding -5- all round it with new padding clips -2- at the positions indicated -3-, using the padding clip pliers -V.A.G 1634- .

• Page 299: Rear Seat Covers And Padding

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Rear seat covers and padding ⇒ “2.1 Removing and installing bench seat cover and padding”, page 293 ⇒ “2.2 Removing and installing cover and padding for smaller backrest section (1/3)”, page 297…

• Page 300
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Detach all padding clips -arrow- on the bottom of the seat bench. – Roll cover upwards all round. Note The illustration shows how the -6- cover is fastened in place in the »Comfort« equipment version. The seat covers of the »Basic«…
• Page 301
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note The illustration shows how the -1- cover is fastened in place in the »Comfort« equipment version. The seat covers of the »Basic« and »Sport« versions are fastened in the same way.
• Page 302
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Fasten cover to seat frame all round with new padding clips -arrows-, using the padding clip pliers -V.A.G 1634- . Rep. gr.74 — Seat — padding, covers…

• Page 303: Removing And Installing Cover And Padding For Smaller Backrest Section (1/3)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing cover and pad‐ ding for smaller backrest section (1/3) Special tools and workshop equipment required ♦ Upholstery clip pliers -V.A.G 1634- 2. Rear seat covers and padding…

• Page 304
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- ♦ Awl -V.A.G 1636A- Removing – Remove bench seat ⇒ page 270 – Remove backrest ⇒ page 271 – Press down padding by head restraint guide -arrow-.
• Page 305
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – On the rear of the backrest, lever the sections -arrows- out of the mountings of the backrest frame -2-, using a screwdriver. – Fold over cover -7- at the sides.
• Page 306
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing Note The illustration shows how the -1- cover is fastened in place in the »Comfort« equipment version. The seat covers of the »Basic« and »Sport« versions are fastened in the same way.

• Page 307: Removing And Installing Cover And Padding For Wider Backrest Section (2/3)

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Removing and installing cover and pad‐ ding for wider backrest section (2/3) Special tools and workshop equipment required ♦ Upholstery clip pliers -V.A.G 1634- 2. Rear seat covers and padding…

• Page 308
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 ♦ Removal wedge -3409- ♦ Awl -V.A.G 1636A- Note Removal and installation of cover and padding of backrest 23 are described with reference to backrest with through-loading unit.
• Page 309
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – On the rear of the backrest, lever the sections -arrows- out of the mountings of the backrest frame -2-, using a screwdriver. – Fold over cover -7- at the sides.
• Page 310
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Note When doing this, carefully pull cover -7- and padding -8- over the head restraint guides. Installing Note The illustration shows how the -1- cover is fastened in place in the »Comfort« equipment version. The seat covers of the »Basic«…

• Page 311: Removing And Installing Through-Loading Unit With Centre Armrest

  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Roll cover -1- up at sides and attach clamping strips to back‐ rest frame. – Further installation is performed in the reverse order of re‐…

• Page 312
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Fold down centre armrest and detach trim cover -1- from back‐ rest frame -2- in -direction of arrow-. – Remove through-loading unit -1- from backrest frame -2-.
• Page 313
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 – Unscrew bolts -4- and -5- (8 Nm). – Remove centre armrest -3- from backrest frame -6- in -direction of arrow-. – Remove covering cap -1- from bracket -2-.
• Page 314
  Jetta 2011 ➤ , Jetta Hybrid 2013 ➤ General body repairs, interior — Edition 06.2012 Installing – Install in reverse order of removal. Note Before installing, check all fasteners for damage and renew if necessary. Rep. gr.74 — Seat — padding, covers…