Форд рейнджер 2012 мануал

1. Manuals
2. Brands
3. Ford Manuals
4. Automobile
5. Ranger 2012
6. Owner’s manual

• Page 1
  FORD RANGER Owner’s Manual…
• Page 2
  No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2017 All rights reserved. Part Number: DB39-120609-JB 20171003140132…

• Page 3: Table Of Contents

  Table of Contents Introduction Doors and Locks About This Manual………..5 Locking and Unlocking………30 Symbols Glossary……….5 Security Replacement Parts Recommendation………7 Passive Anti-Theft System……33 Special Notices……….8 Anti-Theft Alarm……….33 Mobile Communications Equipment…………8 Steering Wheel Adjusting the Steering Wheel….35 At a Glance Audio Control………..35 Front Exterior Overview……..9 Voice Control…………37 Rear Exterior Overview………10…

• Page 4
  Table of Contents Warning Lamps and Indicators….51 Ignition Switch……….82 Audible Warnings and Indicators…..56 Steering Wheel Lock……..83 Starting a Gasoline Engine……83 Information Displays Starting a Diesel Engine……84 General Information……..58 Diesel Particulate Filter……..85 Clock…………..60 Switching Off the Engine……85 Trip Computer……….60 Fuel and Refueling Personalized Settings……..62 Safety Precautions……..86 Climate Control…
• Page 5
  Table of Contents Stability Control Roadside Emergencies Principle of Operation……..106 Hazard Flashers……….131 Using Stability Control…….106 Jump Starting the Vehicle……131 Terrain Control Fuses Principle of Operation……..108 Fuse Box Locations……..133 Using Hill Descent Control…….108 Fuse Specification Chart……135 Changing a Fuse………..144 Parking Aids Maintenance Principle of Operation………110 Parking Aid…………110…
• Page 6
  Table of Contents Wheels and Tires Navigation General Information……..170 Navigation…………244 Using Winter Tires……..170 Appendices Using Snow Chains……..170 Changing a Road Wheel……170 Electromagnetic Compatibility….253 End User License Agreement….254 Technical Specifications……176 Type approvals……….260 Capacities and Specific- ations Map updates Vehicle Dimensions……..178 Map updates……….261 Vehicle Identification Plate…….182 Vehicle Identification Number….182 Audio System…

• Page 7: Introduction

  Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about your vehicle, the greater the safety and pleasure you will get from driving it.

• Page 8
  Introduction Brake system Explosive gas Cabin air filter Fan warning Fasten seatbelt Check engine E71880 Front airbag Check fuel cap E67017 Front fog lamps Child safety door lock Fuse compartment Child safety door unlock Hazard warning flashers Child seat lower anchor Heated rear window Child seat tether anchor Heated windshield…

• Page 9: Replacement Parts Recommendation

  E139213 maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts Parking brake by looking for the Ford, FoMoCo or Motorcraft branding on the parts or their packaging. Power steering fluid Scheduled Maintenance and…

• Page 10: Special Notices

  Ford Warranty. The Ford portable email devices, text messaging Warranty may not cover damage caused devices and portable two-way radios.

• Page 11: At A Glance

  At a Glance FRONT EXTERIOR OVERVIEW E173486 See Locking and Unlocking (page 30). See Changing the Wiper Blades (page 158). See Maintenance (page 146). See Changing a Bulb (page 160). Tire pressure. See Technical Specifications (page 176). See Changing a Road Wheel (page 170). Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 12: Rear Exterior Overview

  At a Glance REAR EXTERIOR OVERVIEW E173487 Fuel filler flap. See Refueling (page 88). See Changing a Bulb (page 160). Auxiliary battery. See Changing the 12V Battery (page 158). See Changing a Bulb (page 160). Tire pressure. See Technical Specifications (page 176). See Changing a Road Wheel (page 170).

• Page 13: Vehicle Interior Overview

  At a Glance VEHICLE INTERIOR OVERVIEW E173636 See Transmission (page 92). See Doors and Locks (page 30). See Power Windows (page 47). See Exterior Mirrors (page 48). See Head Restraints (page 71). See Fastening the Safety Belts (page ?). See Rear Seats (page 76). See Parking Brake (page 102).

• Page 14: Instrument Panel Overview

  At a Glance See Manual Seats (page 72). See Power Seats (page 74). See Opening and Closing the Hood (page 146). INSTRUMENT PANEL OVERVIEW Right-Hand Drive Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 15
  At a Glance Left-Hand Drive E175256 Multi-function lever: Direction Door lock button. See Locking indicators. See Direction and Unlocking (page 30). Indicators (page 45). Main Audio unit. Beam. See Lighting Control (page 40). or Wiper lever. See Multi-functional display. Wipers and Washers (page 38).
• Page 16
  At a Glance Instrument cluster. See Gauges Auxiliary input and USB See (page 51). See Warning Lamps Audio Input Jack (page 208). or and Indicators (page 51). Auxiliary switches. Multi-function lever: Direction Hazard warning flasher switch. indicators. See Direction See Hazard Flashers (page 131). Indicators (page 45).

• Page 17: Child Safety

  Child Safety INSTALLING CHILD RESTRAINTS WARNINGS EXTREME HAZARD! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it. Incorrectly fitted child restraints may swing, tip or come away causing death or injury. E166723 Do not use a child restraint if the Note: Side curtain air bags (where fitted)

• Page 18
  Child Safety Installation of a child restraint anchor fitting – Double Cab The following illustration shows how to install anchor fittings to the anchorage points. Child restraint anchor fittings conforming to Australian Standard AS1754-2004 (or later) can be purchased from child restraint manufacturers or suppliers.
• Page 19
  Child Safety The bolt thread should protrude at least WARNINGS 10mm beyond the spacer with the lock Always ensure that the locking washer, anchor fitting and spacer mechanism of the rear seat back is assembled together. fully engaged when in the upright position, by attempting to pull it down Tighten the bolt with the anchor fitting again.
• Page 20
  Child Safety E175509 E175458 E134042 Each anchor fitting is accessed by removing a plastic cover. 2. Lift up the cover on the back panel trim with a suitable tool. The diagram below shows the correct E175508 installation and orientation of the attaching clip to the anchor fitting.
• Page 21
  Child Safety WARNINGS Always ensure that the attaching clip is properly engaged with the anchor fitting and the tether strap length is adjusted to remove any slack. Always ensure that the locking mechanism of the rear seat back is fully engaged when in the upright position, by attempting to pull it down again.

• Page 22: Child Restraint Positioning

  If you are in any doubt about the laws that WARNINGS apply in your location, please consult your Do not install a booster seat with local Authorised Ford Dealer or Local only the lap strap of the seatbelt. Approved Child Restraint Fitting Station for assistance.

• Page 23: Child Safety Locks

  Child Safety Selecting a child restraint system CHILD SAFETY LOCKS To provide protection, a child restraint Manual Child Safety Locks system should meet three requirements. The child restraint system complies WARNING with Australian Standard AS1754. You cannot open the doors from Infants and children must be properly inside if you have put the child safety restrained at all times in an approved…

• Page 24: Seatbelts

  Seatbelts PRINCIPLE OF OPERATION WARNINGS No modifications or additions should be made by the user which will either WARNINGS prevent the seatbelt adjusting Wear a seatbelt and keep sufficient devices from operating to remove slack or distance between yourself and the prevent the seatbelt assembly from being steering wheel.

• Page 25: Seatbelt Reminder

  Seatbelts Sounds when a seatbelt is unfastened in an occupied seat and your vehicle is moving. If you do not fasten your seatbelt, the audible warning will turn off automatically after approximately five minutes. The warning lamp continues to illuminate until you fasten the seatbelt.

• Page 26: Supplementary Restraints System

  Supplementary Restraints System Note: A loud bang sounds and there is a PRINCIPLE OF OPERATION cloud of harmless powdery residue if an airbag deploys. This is normal. WARNINGS Note: Only wipe airbag covers with a damp Extreme Hazard! Never use a cloth.

• Page 27: Passenger Airbag

  Supplementary Restraints System PASSENGER AIRBAG WARNINGS Use accessory seat covers designed for seats with side airbags. Have these fitted by an authorized dealer. Do not attempt to service, repair, or modify the supplementary restraint system or associated components. Failure to follow this instruction could result in personal injury or death.

• Page 28: Driver Knee Airbag

  Supplementary Restraints System SIDE CURTAIN AIRBAGS WARNING Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

• Page 29: Keys And Remote Controls

  Keys and Remote Controls GENERAL INFORMATION ON REMOTE CONTROL RADIO FREQUENCIES You can program a maximum of eight remote controls to your vehicle. This Note: Changes or modifications not includes any you recieved with your expressly approved by the party responsible vehicle.

• Page 30
  Keys and Remote Controls Changing the Remote Control 3. Carefully remove the cover. Battery Make sure that you dispose of old batteries in an environmentally friendly way. E107998 Seek advice from your local authority about recycling old batteries. Remote Control With a Folding Key Blade — Type 1 The remote control uses one coin-type three-volt lithium battery CR2032 or…

• Page 31: Replacing A Lost Key Or Remote Control

  Keys and Remote Controls E168254 Press the button to release the key before beginning the procedure. E151800 Note: Do not touch the battery contacts or the printed circuit board with the screwdriver. 5. Carefully remove the battery with the screwdriver. E168255 2.

• Page 32: Doors And Locks

  Doors and Locks Locking and unlocking the doors LOCKING AND UNLOCKING with the remote control Note: Do not leave your keys in the vehicle. Automatic relocking: The doors will Note: All the doors will lock automatically relock automatically if you do not open a when the vehicle is driven at or above 7 door within 45 seconds of unlocking the Km/h (4.3 mph).

• Page 33
  Doors and Locks Locking and unlocking the doors WARNING from inside Do not activate double locking when persons or animals are inside the Press the button. For item vehicle. You will not be able to location. See Instrument unlock the doors from inside if you have Panel Overview (page 12).
• Page 34
  Doors and Locks Automatic locking by speed Press the central lock or unlock button twice within three seconds and wait for three seconds to toggle the automatic locking by speed function. The system will chirp when toggling. Automatic unlocking Note: Automatic unlock is default enabled. Press the central lock or unlock button three time within three seconds and wait for three seconds to toggle the automatic…

• Page 35: Security

  Security • Perimeter alarm with interior sensors. PASSIVE ANTI-THEFT • Perimeter alarm with interior sensors SYSTEM and battery back-up sounder. Principle of Operation Perimeter Alarm The system prevents someone from The perimeter alarm is a deterrent against starting the engine with an incorrectly unauthorized access to your vehicle coded key.

• Page 36
  Security Note: Fuel fired heater may trigger false Note: This may result in false alarms if alarms. If you are using the fuel fired heater, animals or moving objects are inside your direct the air flow towards the foot well. vehicle.

• Page 37: Steering Wheel

  Steering Wheel ADJUSTING THE STEERING WHEEL WARNING Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 71). E95179 3. Lock the steering column. AUDIO CONTROL Select the required source on the audio unit.

• Page 38
  Steering Wheel Type 1 Type 2 E164290 E164289 Volume up Volume up Seek up or next Seek up, next or end call Volume down Volume down Seek down or previous Seek down, previous or accept Mode call Press M to select the audio source. Seek, Next or Previous Press the seek button to: •…

• Page 39: Voice Control

  Steering Wheel VOICE CONTROL (If Equipped) E141533 Push the control to switch on or off the voice control. CRUISE CONTROL E141961 See Using Cruise Control (page ?). Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 40: Wipers And Washers

  Wipers and Washers WINDSHIELD WIPERS AUTOWIPERS CAUTION CAUTIONS Do not switch autowipers on in dry Operating this function with the weather conditions. The rain sensor engine off will drain the battery. is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.

• Page 41: Windshield Washers

  Wipers and Washers Adjust the sensitivity of the rain sensor using the rotary control. With low sensitivity, the wipers will operate when the sensor detects a lot of water on the windshield. With high sensitivity, the wipers will operate if the sensor detects a small amount of water on the windshield.

• Page 42: Lighting

  Lighting GENERAL INFORMATION LIGHTING CONTROL Condensation in the Exterior Front Lighting control positions Lamps and Rear Lamps Exterior front lamps and rear lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.

• Page 43: Autolamps

  Lighting You will hear a short tone. The headlamps will go off automatically after three minutes with any door open, or 30 seconds after the last door has been closed. With all doors closed, but within the 30 second delay, opening any door will result in the three minute timer starting again.

• Page 44: Instrument Lighting Dimmer

  Lighting Note: If you have switched autolamps on, DAYTIME RUNNING LAMPS you can only switch the high beam on when Equipped) autolamps has switched the headlamps on. The headlamps will come on and go off WARNING automatically depending on the ambient light.

• Page 45
  Lighting Adjustment You can adjust the front fog lamp aiming slightly for driving comfort. Note: Fog lamp adjustment must meet the local regulation requirements. E136854 E136853 Position the unloaded vehicle on a flat, level surface. 2. Seat one person in the driver’s seat. 3.

• Page 46: Headlamp Leveling

  Lighting HEADLAMP LEVELING E78244 Without headlamp leveling With headlamp leveling You can adjust the level of the headlamp beams according to the vehicle load. E133544 Raised headlamp beams Lowered headlamp beams Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 47: Direction Indicators

  Lighting Set the headlamp leveling control to zero INTERIOR LAMPS when your vehicle is unloaded. Set it to provide illumination between 35 and 100 Courtesy lamp meters (114 and 328 feet) when your vehicle is partially or fully loaded. DIRECTION INDICATORS E112207 Door contact If you set the switch to position B, the…

• Page 48
  Lighting Reading lamps E112208 If you switch off the ignition, the reading lamps will go off automatically after some time to prevent the vehicle battery from discharging. To switch them back on, switch on the ignition for a short time. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 49: Windows And Mirrors

  Windows and Mirrors Note: If you operate both the switch on the POWER WINDOWS relevant door and the switch for that window on the driver s door at the same WARNINGS time, the window will stop moving. Do not leave children unattended in your vehicle and do not let them play One-Touch Down (If Equipped)

• Page 50: Exterior Mirrors

  Windows and Mirrors Overriding the Bounce-Back Feature 4. Open the window using the first action point and try to close it automatically WARNING using second action point. When you override the bounce-back 5. If the window does not open or close feature the window will not reverse automatically when the switch is if it detects an obstacle.

• Page 51: Interior Mirror

  Windows and Mirrors Manual Folding and Unfolding The power folding mirrors operate with the ignition on, and for several minutes after you switch the ignition off. Note: They will no longer operate if you switch the ignition off and open a door. E131480 Left-hand mirror Right-hand mirror…

• Page 52: Sliding Windows

  Windows and Mirrors Pull the tab below the mirror toward you to reduce the effect of bright light from behind. Automatic Dimming Mirror (If Equipped) WARNING Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.

• Page 53: Instrument Cluster

  Instrument Cluster Engine Coolant Temperature GAUGES Gauge WARNING Never remove the coolant reservoir cap while the engine is running or hot. At normal operating temperature, the needle will remain in the center section. Note: Do not restart the engine until the cause of overheating has been resolved.

• Page 54
  Instrument Cluster • Oil pressure warning lamp If it illuminates when you are driving, check that the parking brake is not engaged. If • Oil Change Reminder Indicator (Diesel the parking brake is not engaged, this only) indicates a malfunction. Have the system •…
• Page 55
  Instrument Cluster Oil pressure warning lamp Powertrain warning lamp CAUTION Do not resume your journey if the oil pressure warning lamp comes on despite the oil level being correct. Have this checked immediately. If the oil pressure warning lamp comes on when you are driving, this indicates a malfunction.
• Page 56
  Instrument Cluster Four-wheel drive indicator DPF (Diesel Particulate Filter) The four-wheel drive indicator If this illuminates, have the lamp will come on when the system checked by a properly transfer shift switch is in the 4H trained technician as soon as E95449 E131555 or 4L position.
• Page 57
  Instrument Cluster Direction indicators High beam indicator The high beam indicator will Right side turn indicator come on when you switch the headlamp high beam on. It will flash when you use the headlamp flasher. Front fog lamp indicator The front fog lamp indicator will come on when you switch the front fog lamps on.

• Page 58: Audible Warnings And Indicators

  Instrument Cluster Direction indicator AUDIBLE WARNINGS AND INDICATORS The direction indicator chime will sound when the left or right direction indicator is Door open warning activated. The door open warning chime will sound Direction indicators warning if the vehicle speed exceeds approximately The direction indicator warning chime will 10 km/h (6.2 mph) and you have not sound if the left or right direction indicator…

• Page 59
  Missed lock warning chime will sound if the door is not locked after pressing the lock button. Note: This feature is default off. To activate it, contact your Ford dealer. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 60: Information Displays

  Information Displays Device List GENERAL INFORMATION There are various icons placed around the WARNING display screen which light up when a function is active (for example CD, Radio Driving while distracted can result in or Aux). loss of vehicle control, crash and injury.

• Page 61
  Information Displays Note: Some options may appear slightly different or not at all if the items are optional. Menu Navigation Route options Map display Assistance options Personal data Reset all settings Audio settings Adaptive volume Sound NAV audio mixing DSP settings DSP equalizer Traffic News…

• Page 62: Clock

  Information Displays CLOCK For detailed instructions on how to adjust the clock See Audio Unit Clock and Date Displays (page 203). TRIP COMPUTER Controls E136103 For item location: See Gauges (page 51). E136110 Press the SET/RESET button less than 2 Tripmeter (A and B) seconds to: •…

• Page 63
  Information Displays Average fuel consumption E138113 Registers the mileage of individual E138117 journeys. Distance to empty E138118 Indicates the average fuel consumption since the function was last reset. E138114 Indicates the approximate distance the Instantaneous fuel consumption vehicle will travel on the fuel remaining in the tank.

• Page 64: Personalized Settings

  Information Displays Shows the outside air temperature. Note: The position of the trip computer display may vary depending on the information shown in the display. PERSONALIZED SETTINGS Language setting E138116 Indicates the current average fuel consumption. Average speed E138129 Language set menu active Language title display A choice of eleven languages are available from 01 to 11 in the order shown below:…

• Page 65
  Information Displays With ignition off, press and hold the light dimming button. For item location: See Gauges (page 51). and switch ignition to on. 2. The display will show the language set menu active. 3. Press the SET/RESET to select between the different languages.

• Page 66: Climate Control

  Climate Control PRINCIPLE OF OPERATION AIR VENTS Outside Air Keep the air intakes in front of the windshield free from obstruction (such as snow or leaves) to allow the climate control system to function effectively. Recirculated Air The air currently in the passenger compartment recirculates.

• Page 67
  Climate Control Blower Recirculated air E132663 Press the recirculated air button to toggle between outside air and recirculated air. System settings Temperature control Note: Set all controls to the positions shown. Heating the interior quickly E132662 E132666 Blue Cold Select the outside air. Warm Maximum cooling Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 68
  Climate Control Ventilation Cooling with outside air E132667 E132668 Switch the air conditioning on and select Face level and footwell the outside air. Face level Cooling the interior quickly Set the air distribution control to position A or position B. Set the blower and temperature to any position and select the outside air.

• Page 69: Automatic Climate Control

  Climate Control Reducing interior air humidity Note: At low outside temperatures, when the system is in auto mode, the air flow will be low and the air stream will be directed to the windshield and the side windows as long as the engine is cold. Air distribution control E132670 Selecting air to windshield will…

• Page 70
  Climate Control Blower You can set the temperature between 16°C (61°F) and 28°C (82°F) in steps of 0.5°C (1°F). In position LO (below 16°C (61°F)) the system will switch to permanent cooling, in HI (above 28°C (82°F)) to permanent heating, and not regulate a stable temperature.
• Page 71
  Climate Control Recirculated air Windshield defrosting and demisting E132688 Press the recirculated air button to toggle between fresh air and recirculated air. Note: When the system is in auto mode and the interior and exterior temperatures are quite hot, the system selects recirculated Press the MAX defrost button for quick air automatically to maximize cooling of the demisting of the windshield.

• Page 72: Heated Windows And Mirrors

  Climate Control Switching the air conditioning on HEATED WINDOWS AND and off MIRRORS Note: Make sure the engine is running before operating the heated windows. Heated Windshield (If Equipped) Press the button to clear the heated windshield of thin ice and fog.

• Page 73: Seats

  Seats • Adjust the head restraint so that the SITTING IN THE CORRECT top of it is level with the top of your POSITION head and as far forward as possible. Make sure that you remain WARNINGS comfortable. Do not recline the seatback too far •…

• Page 74: Manual Seats

  If seat cover removal and installation is E140447 required, see an authorized Ford dealer. Press locking button 1 and at the same Moving the Seat Backward and time release the retaining clip 2 using a suitable implement.

• Page 75
  Seats Adjusting the Height of the Driver Seat E131590 Note: Do not move the front seats too close to the instrument panel. E131593 Adjusting the Lumbar Support Recline Adjustment E131592 E131595 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 76: Power Seats

  Note: Seat covers are designed and fitted to work with the seat’s existing features and safety systems, and should not require adjustment. If seat cover removal and installation is required, see an authorized Ford dealer. E136219 Moving the Seat Backward and Bench Seat Forward…

• Page 77
  Seats Recline Adjustment WARNING Do not move the front seats too close to the instrument panel. Adjusting the Height of the Driver’s Seat E131596 Tilting the Seat E131594 E131607 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 78: Rear Seats

  Seats Folding the Seat Cushion REAR SEATS Double Cab Note: The seat covers fitted to your vehicle as part of a special equipment pack are washable without removing them from the seats. Note: The seat covers are designed to work with the seat’s existing features and safety systems, and should not require adjustment.

• Page 79
  Seats Unfolding the Seat Cushion Note: Do not unlatch and fold the seat backrest when the seat cushion is folded Double Cab WARNING Make sure that the seats and the seat backrests are secure and fully locked in their catches. E131744 E247640 Push the seat cushion down.

• Page 80: Heated Seats

  Seats HEATED SEATS WARNING People who are unable to feel pain to their skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions, must exercise care when using the heated seat. The heated seat may cause burns even at low temperatures, especially if used for long periods of time.

• Page 81: Auxiliary Power Points

  Auxiliary Power Points 12 Volt DC Power Point Location Power points may be found: WARNING • on the center stack. Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the lighter CIGAR LIGHTER can cause damage not covered by your warranty, and can result in fire or serious WARNING injury.

• Page 82: Storage Compartments

  Storage Compartments Passenger Side CUP HOLDERS Note: Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or crashes, including hot drinks which may spill. WARNING Use only soft cups in the cup holders. Hard objects can injure you in a crash. GLOVE BOX Driver Side E136461…

• Page 83: Glasses Holder

  Storage Compartments GLASSES HOLDER (If Equipped) E150040 The glasses must be placed in the glasses holder with the lenses facing downward. If not, the glasses can fall down when the glasses holder is open. REAR SEAT ARMREST E131745 Push the armrest into the seatback to store it.

• Page 84: Starting And Stopping The Engine

  If you smell exhaust fumes inside E247596 your vehicle, have it checked by a Ford Dealer immediately. Do not Note: Make sure the key is clean before drive your vehicle if you smell exhaust inserting it into any lock cylinder.

• Page 85: Steering Wheel Lock

  Starting and Stopping the Engine Starting the Engine Note: You can only operate the starter 10 seconds. The number of start attempts is Turn the key to position III. Release the limited to approximately six. If you exceed key when the engine starts. this limit, the system does not allow you to try again for about 30 minutes.

• Page 86: Starting A Diesel Engine

  Starting and Stopping the Engine Vehicles with Automatic Transmission Note: After a limited number of attempts to start your engine, the system will not Fully depress the brake pedal. allow you to try again until a period of time 2. Shift into park (P) or neutral (N). has elapsed, for example 30 minutes.

• Page 87: Diesel Particulate Filter

  Starting and Stopping the Engine If your journeys meet one of the following DIESEL PARTICULATE FILTER conditions: The filter forms part of the emissions • You drive only short distances. reduction system on your vehicle. It filters • You frequently switch the ignition on harmful diesel particulates (soot) from the and off.

• Page 88: Fuel And Refueling

  Fuel and Refueling • Avoid inhaling fuel vapors. Inhaling fuel SAFETY PRECAUTIONS vapor can lead to eye and respiratory tract irritation. In severe cases, WARNINGS excessive or prolonged breathing of Do not overfill the fuel tank. The fuel vapor can cause serious illness and pressure in an overfilled tank may permanent injury.

• Page 89: Fuel Quality

  Fuel and Refueling Note: We do not recommend the use of Note: Do not use raw oils, fats or waste additional additives or other engine cooking greases, these are not biodiesel. treatments for normal vehicle use. Note: If your vehicle experiences low Use minimum 91 octane unleaded gasoline temperature fuel waxing issues, consider that meets the specification defined by EN…

• Page 90: Running Out Of Fuel

  Fuel and Refueling RUNNING OUT OF FUEL CATALYTIC CONVERTER Avoid running out of fuel because this WARNING situation may have an adverse effect on Do not park or idle your vehicle over engine components. dry leaves, dry grass or other If you have run out of fuel: combustible materials.

• Page 91
  Fuel and Refueling WARNINGS If you use a high pressure spray to wash your vehicle, only spray the fuel filler flap briefly from a distance not less than 200 mm. We recommend that you wait at least 10 seconds before removing the fuel nozzle to allow any residual fuel to drain into the fuel tank.

• Page 92: Technical Specifications

  The customer warranty may be void Close and push the fuel filler flap to for any damage to the fuel tank or fuel lock it. system if the correct genuine Ford fuel filler cap is not used. TECHNICAL SPECIFICATIONS Fuel Consumption Figures…

• Page 93
  Fuel and Refueling CO2 Emis- Urban Extra-Urban Combined sions Variant l/100 km l/100 km l/100 km g/km (mpg) (mpg) (mpg) Vehicles with a 3.2L Duratorq-TDCi engine — 4- 11.8 (23.9) 7.6 (37.1) 9.1 (31.0) wheel drive (manual trans- mission — MT82) Vehicles with a 3.2L Duratorq-TDCi engine — 2- 11.6 (24.3)

• Page 94: Transmission

  Transmission Note: A cold engine has a higher idle speed. MANUAL TRANSMISSION This will increase the tendency for your vehicle to creep when you have selected a Selecting Reverse Gear drive gear. Do not engage reverse gear when your Selector lever positions vehicle is moving.

• Page 95
  Transmission Note: To move the selector lever from park The transmission shifts to the appropriate (P), apply the footbrake with ignition key in gear for optimum performance based on position II. ambient temperature, road gradient, vehicle load and your input. Note: An audible warning will sound if you open the driver’s door and you have not Sport Mode (S)
• Page 96
  Transmission Note: For some markets this feature is disabled. Your vehicle has a brake-shift interlock feature that prevents moving the gearshift lever from park (P) when the ignition is on and you do not press the brake pedal. The system requires service if you cannot move the gearshift lever out of park (P) with the ignition on and the brake pedal pressed.
• Page 97
  Transmission Note: See an authorized dealer as soon as possible if this procedure is used. Automatic Transmission Adaptive Learning This feature may increase durability and provide consistent shift feel over the life of your vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both.

• Page 98: Four-Wheel Drive

  Four-Wheel Drive (If Equipped) Four-Wheel Drive, High Range PRINCIPLE OF OPERATION (4H) This system is a proactive system. It has WARNING the ability to anticipate wheel slip and transfer torque to the rear wheels before Do not use four-wheel drive 4H for slip occurs.

• Page 99
  Four-Wheel Drive (If Equipped) Shifting Between 2H and 4L Driving in Special Conditions With Four-Wheel Drive Note: Shift to 4L will deactivate Engine Traction Control and Trailer Stability Control Four-wheel drive vehicles are suitable for but Hill Descent Control, Hill Start Assist driving on sand, snow, mud and rough and Brake Traction Control remain active.
• Page 100
  Four-Wheel Drive (If Equipped) Emergency Maneuvers Avoid driving at excessive speeds, this causes vehicle momentum to work against In an unavoidable emergency situation you and your vehicle could become stuck where a sudden sharp turn must be made, to the point that assistance may be remember to avoid over-driving your required from another vehicle.
• Page 101
  Four-Wheel Drive (If Equipped) Driving on Hilly or Sloping Terrain Descend a hill in the same gear you would use to climb up the hill to avoid excessive Although natural obstacles may make it brake application and brake overheating. necessary to travel diagonally up or down Do not descend in neutral.
• Page 102
  Four-Wheel Drive (If Equipped) Avoid sudden braking. Although a We recommend that you use caution when four-wheel drive vehicle may accelerate your vehicle has either a high load or device better than a two-wheel drive vehicle in (i.e. ladder or luggage racks). Any snow and ice, it will not stop any faster as modifications to your vehicle that raise the braking occurs at all four wheels.

• Page 103: Rear Axle

  Rear Axle • Automatically disengage when a speed LIMITED SLIP DIFFERENTIAL of 40 km/h is exceeded. This axle provides added traction on • Automatically re-engage when the slippery surfaces, particularly when one speed drops below 30 km/h. wheel is on a poor traction surface. Under •…

• Page 104: Brakes

  Brakes PRINCIPLE OF OPERATION HINTS ON DRIVING WITH ANTI-LOCK BRAKES Disc brakes The anti-lock braking system does not Wet brake discs result in reduced braking eliminate the risks when: efficiency. Dab the brake pedal when • You drive too closely to the vehicle in driving from a car wash to remove the film front of you.

• Page 105: Hill Start Assist

  Brakes 3. Press the release button and push the The system will turn on automatically on parking brake lever downward. any slope which can result in significant vehicle rollback. HILL START ASSIST Note: Hill start assist is available in vehicles equipped with electronic stability control (ESC).

• Page 106
  Brakes • Apply the parking brake. • Open any door. • Drive off uphill without re-applying the brake. • Wait for one to two seconds after you remove your foot from the brake pedal. • If the system is active in a forward gear, select reverse gear.

• Page 107: Traction Control

  Traction Control PRINCIPLE OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, E207884 the system reduces engine power in order…

• Page 108: Stability Control

  Stability Control PRINCIPLE OF OPERATION Electronic Stability Control WARNING The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. The system supports stability when your vehicle starts to slide away from your intended path.

• Page 109
  Stability Control 2-wheel drive vehicles Press and hold the switch for one second to deactivate engine traction control, trailer stability control and brake traction control. Hill start assist remains active. 4-wheel drive vehicles Note: All the stability control (ESP) functions are reactivated when 2H position is selected.

• Page 110: Terrain Control

  Terrain Control Note: HDC will be active at speeds less PRINCIPLE OF OPERATION than 35 km/h and deactivated above 40 km/h but will not turn off until vehicle WARNING exceeds 60 km/h. Before driving off-road it is Note: HDC will turn off when you switch absolutely essential that the ignition off.

• Page 111
  Terrain Control Changing the Set Speed • Press and hold SET+ or SET-. Release the control when you reach the desired speed. • Press and release SET+ or SET-. The set speed will change in approximately 1 km/h increments. Pressing the accelerator pedal or brake pedal will increase or decrease the speed respectively.

• Page 112: Parking Aids

  Only use the Ford approved trailer obstacles or false alerts. wiring kit (including the trailer wiring module) when towing with your PARKING AID vehicle.

• Page 113
  Parking Aids E134605 The parking aid is automatically activated when you select reverse gear with the ignition switched on. Note: It will chime once to indicate that the parking aid is activated. E134606 Note: The indicator lamps will be displayed in the multi-function display.

• Page 114: Rear View Camera

  Parking Aids E134608 E134607 A trailer symbol indicates there is a trailer Malfunction indicator. attached and the system is disabled. Note: If a malfunction is indicated the system will be disabled and a unique tone REAR VIEW CAMERA (If Equipped) will be heard.

• Page 115
  Parking Aids Note: Marks are for general guidance only, and are calculated for vehicles in maximum load conditions on an even road surface. The lines show the distance from the outer edge of the front tire plus two inches (51 millimeters) and the rear bumper.
• Page 116
  Parking Aids Green — 79 inches (1.8 meter). Black — center line of the projected vehicle path. Note: When reversing with a trailer, the lines on the screen are not shown. The camera will show your vehicle direction and not the trailer.

• Page 117: Cruise Control

  Cruise Control Switching Cruise Control On PRINCIPLE OF OPERATION Press and release ON. WARNING Setting the Cruise Speed The system does not relieve you of your responsibility to drive with due Drive to desired speed. care and attention. 2. Press and release SET+. 3.

• Page 118: Load Carrying

  Load Carrying GENERAL INFORMATION WARNINGS To service the roller shutter, see an authorized dealer. WARNINGS Use load securing straps to an approved standard, e.g. DIN. Note: You must secure the loads carried in the loadspace. Make sure that you secure all loose items properly.

• Page 119
  Load Carrying E154609 Unlock the roller shutter by pulling the pull strap to the right or by pressing the lock buttons. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 120: Roof Racks And Load Carriers

  Load Carrying E154610 WARNINGS ROOF RACKS AND LOAD Do not exceed the maximum CARRIERS permissible roof rail load of 80 kg, including the roof rack. WARNINGS Check the security of the roof rack load: If you use a roof rack, the fuel consumption of your vehicle will be •…

• Page 121: Load Retaining Fixtures

  Load Carrying E131684 Roof Rail Sports bar Box rail Note: Do not sit or stand on items B or C. WARNINGS Note: Do not use item C to secure loads. Always inspect the tie down points before use. Note: To reduce fuel consumption, roof rails should be removed when not in use.

• Page 122
  Load Carrying E131643 E133896 Load Rating of Type 1 Tie Down Points: 300 kg. Type 2 WARNING Do not exceed the load rating for the tie down points. E134098 Cleat. Bezel. Spring. E133894 Pin. Load Rating of Type 2 Tie Down Points: Do not use the tie down points under the 200 kg.
• Page 123
  Load Carrying • Locking bezel is damaged or broken or Engage the base of the tie down point will not lock into place. into the rail channel while holding the cleat vertically. • Not seated correctly within the support rail. 2.

• Page 124: Tailgate

  Load Carrying E131682 E135868 Note: Secure luggage or cargo placed on Raise the tailgate slightly. the load rest with the load rest stoppers. 2. Pull the support cable rearwards. 3. Release the support cable from TAILGATE tailgate. 4. Repeat steps 1 to 3 to pull out the WARNINGS support cable on the other side.

• Page 125: Towing

  Towing • Reduce the stipulated maximum TOWING A TRAILER permitted gross combination mass by 10% for every additional 1,000 m in WARNINGS high altitude regions above 1,000 m. Do not exceed 100 km/h. Failure to • Use a low gear when descending a follow this instruction could result in steep downhill gradient.

• Page 126: Recommended Towing Weights

  Towing RECOMMENDED TOWING WEIGHTS Maximum Towing Capacities Variant Drive Transmis- Without Trailer With Trailer Max. Gross sion Brake Brake Train Weight 2.5L Petrol Manual 750 kg 2,200 kg 5,125 kg 2.2L Diesel Manual 750 kg 2,500 kg 5,425 kg 4×2 Hi- Manual 750 kg 3,350 kg…

• Page 127: Tow Ball

  Towing TOW BALL WARNING Make sure that the tow ball arm is WARNINGS fully engaged in the seat. Never leave the detached tow ball arm unsecured inside the vehicle. Driving with a trailer This would increase the risk of injury in an accident.

• Page 128: Towing Points

  Towing Removing the tow ball arm WARNINGS To avoid risk of injury, never unlock the tow ball arm with the trailer attached. Remove the tow ball when driving without a trailer. Maintenance Keep the system clean. Periodically lubricate the tow ball mechanism with resin-free grease or oil and the lock with graphite.

• Page 129
  Towing WARNINGS WARNINGS The brake and steering assistance Do not tow your vehicle if the will not operate unless the engine is ambient temperature is below 0°C. running. Press the brake pedal harder and allow for increased stopping distances and heavier steering. Too much tension in the tow rope could cause damage to your vehicle or the vehicle that is towing.

• Page 130: Driving Hints

  Driving Hints BREAKING-IN REDUCED ENGINE PERFORMANCE Tires WARNING New tires need to be run-in for approximately 500 km. During this time, Continued operation of an you may experience different driving overheating engine will increase the characteristics. temperature further, and cause the engine to shut down completely.

• Page 131: Driving Through Water

  Note: For Chassis Cab vehicles or where a 3rd party tray has been fitted, confirm the installation is in line with the Ford Body Builders Guide. This ensures fuel tank E137139 breathers and drive line breathers are located above the specified water wading 800mm (31.5 inches)

• Page 132
  Driving Hints WARNINGS Secure the floor mat to both retention devices so that it cannot slip out of position and interfere with the pedals. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death. Do not place additional floor mats or any other covering on top of the original floor mats.

• Page 133: Roadside Emergencies

  Roadside Emergencies To Connect the Booster Cables HAZARD FLASHERS The hazard warning button is located on the instrument panel. E71943 Use it when your vehicle is creating a safety hazard for other motorists. Press the button to turn on the hazard warning function, and the front and rear direction indicators will flash.

• Page 134
  Roadside Emergencies E133362 4. Connect the negative (-) terminal of vehicle B to the ground connection of vehicle A (cable D). WARNINGS Do not connect directly to the negative (–) terminal of the flat battery. Make sure that the cables are clear of any moving parts and fuel delivery system parts.

• Page 135: Fuses

  Fuses Release the catches and remove the cover. FUSE BOX LOCATIONS Passenger Compartment Fuse Box Left-Hand Drive Fully open the driver’s side storage compartment. E173836 Right-Hand Drive E133080 E173835 Engine compartment fuse box Passenger compartment fuse Auxiliary fuse box Engine Compartment Fuse Box E134659 E133079 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 136
  Fuses Auxiliary Fuse Box E173837 Release the catches and remove the cover. E174325 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 137: Fuse Specification Chart

  Fuses FUSE SPECIFICATION CHART Engine Compartment Fuse Box E133601 Fuse Fuse Amp Protected Components Rating Passenger compartment fuse box supply (Battery) Passenger compartment fuse box supply (Battery) 3 (Petrol) Engine cooling fan 3 (Diesel) Glow plug control module Anti-lock brake system module Power windows (front and rear) Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 138
  Fuses Fuse Fuse Amp Protected Components Rating Four wheel drive (4WD) motor ground Not used Not used Power seats Power windows (front) Blower motor Four wheel drive (4WD) motor power Starter solenoid Heated rear window 15 (Petrol) Flex-fuel pump 15 (Diesel) Vaporizer glow plug Air conditioning clutch Power windows (front)
• Page 139
  Fuses Fuse Fuse Amp Protected Components Rating Electronic control module (ECM) Battery monitoring sensor Auxiliary power socket (rear console) Air conditioning pressure switch Transmission control module (TCM) Crew chief module, Spare Passenger compartment fuse box supply (Ignition) Anti-lock brake system module Headlamp leveling Heated seat Power mirrors…
• Page 140
  Fuses Relay Number Protected Components Key interlock Wiper on or off Horn Air conditioning clutch Differential lock Wiper Hi or Lo Engine cooling fan low Engine cooling fan high Flex-fuel pump, vaporizer glow plug Heated rear window Heated windscreen Not used Electronic control module (ECM) power hold Ignition…
• Page 141
  Fuses Relay Number Protected Components Not used Blower motor Power seat Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 142
  Fuses Passenger Compartment Fuse Box E133602 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 143
  Fuses Fuse Fuse Amp Protected Components Rating Fuel pump Not used Not used Passive anti-theft system (PAT) Interior lamp, driver’s door switch pack, mood lights, puddle lights, automatic shifter, footwell lamp Not used Rain sensor module Not used Not used Not used Driver’s door unlock, central double locking Stop lamp switch…
• Page 144
  Fuses Fuse Fuse Amp Protected Components Rating Multi-function display, Hi audio, brake valve closing (BVC) module Interior motion sensor Washer pump ground Central locking ground Driver’s door unlock, central double locking ground Instrument cluster, parking aid module, rear view camera, manual air conditioning, rear view mirror, tracking and blocking module Restraint system, passenger air-bag deactivation indicator…
• Page 145
  Fuses Fuse Fuse Amp Protected Components Rating Driving Light Position lamp LED beacon Work lights Spare Power point Reversing lamp Direction indicators, stop lamp Crew chief Disable fuse (isolator ground) Not used Not used Relay Number Protected Components Work lights LED beacon Spare Position lamp…

• Page 146: Changing A Fuse

  Fuses CHANGING A FUSE Fuses WARNING Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage E217331 rating can cause severe wire damage and could start a fire. If electrical components in the vehicle are not working, a fuse may have blown.

• Page 147
  Fuses Callout Fuse Type M Case J Case J Case Low Profile Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 148: Maintenance

  Maintenance Check Monthly GENERAL INFORMATION • Engine oil level. See Engine Oil Check (page 154). WARNINGS • Engine coolant level. See Engine Do not work on a hot engine. Coolant Check (page 155). • Brake fluid level. See Brake and Switch the ignition off and apply the Clutch Fluid Check (page 156).

• Page 149
  Maintenance E131810 E131811 2. Raise the hood slightly. 5. Support it with the strut. 3. Move the catch towards the left-hand Closing the hood side of the vehicle. Note: Make sure that the hood is closed 4. Open the hood. properly.

• Page 150: Under Hood Overview — 2.2L Duratorq-Tdci (Puma) Diesel

  Maintenance UNDER HOOD OVERVIEW — 2.2L DURATORQ-TDCI (PUMA) DIESEL E131930 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 151
  Maintenance Engine coolant reservoir cap. See Engine Coolant Check (page 155). Brake and clutch fluid reservoir cap. See Brake and Clutch Fluid Check (page 156). Engine oil dipstick . See Engine Oil Dipstick (page 154). Engine oil filler cap . See Engine Oil Check (page 154). Fuel filter water trap.

• Page 152: Under Hood Overview — 2.5L Duratec-He (122Kw/165Ps) — Mi4

  Maintenance Washer fluid reservoir cap. See Washer Fluid Check (page 157). Air cleaner. The filler caps and the engine oil dipstick are colored for easy identification. UNDER HOOD OVERVIEW — 2.5L DURATEC-HE (122KW/165PS) — MI4 E131919 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 153
  Maintenance E131920 Engine coolant reservoir cap. See Engine Coolant Check (page 155). Brake and clutch fluid reservoir cap. See Brake and Clutch Fluid Check (page 156). Engine oil filler cap . See Engine Oil Check (page 154). Engine oil dipstick .

• Page 154: Under Hood Overview — 3.2L Duratorq-Tdci (Puma) Diesel

  Maintenance UNDER HOOD OVERVIEW — 3.2L DURATORQ-TDCI (PUMA) DIESEL Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 155
  Maintenance E131968 Engine coolant reservoir cap. See Engine Coolant Check (page 155). Brake and clutch fluid reservoir cap. See Brake and Clutch Fluid Check (page 156). Engine oil dipstick . See Engine Oil Dipstick (page 154). Engine oil filler cap .

• Page 156: Engine Oil Dipstick — 2.2L Duratorq-Tdci (Puma) Diesel/3.2L Duratorq-Tdci (Puma) Diesel

  Maintenance Washer fluid reservoir cap. See Washer Fluid Check (page 157). Air cleaner. The filler caps and the engine oil dipstick are colored for easy identification. ENGINE OIL DIPSTICK — 2.2L ENGINE OIL CHECK DURATORQ-TDCI (PUMA) Make sure that your vehicle is on level DIESEL/3.2L DURATORQ-TDCI ground.

• Page 157: Engine Coolant Check

  Remove the filler cap. Make sure that the coolant level is between the MIN and MAX marks on the 2. Add oil that meets Ford specifications. coolant reservoir. If the coolant level is at 3. Replace the filler cap. Turn it until you or below the minimum mark, immediately feel a strong resistance.

• Page 158: Brake And Clutch Fluid Check

  Top up with fluid that meets the Ford In case of emergency, you can add water specification. without engine coolant in order to reach a vehicle service location.

• Page 159: Washer Fluid Check

  Overview (page 148). See Under Hood disposal facilities. Overview (page 152). Switch the ignition off. Note: Only add fuel that meets the Ford specification. See Fuel Quality (page 87). 2. Connect and secure a suitable hose on the filter drain plug.

• Page 160: Changing The 12V Battery

  Maintenance CHANGING THE 12V BATTERY CHECKING THE WIPER BLADES WARNING You must replace the battery with one of exactly the same specification. Main Battery Note: Where applicable you must reprogram the audio system using the keycode. See Audio System Security E142463 (page 203).

• Page 161
  Maintenance E93783 Pull the wiper blade and arm away from the glass. 2. Turn the wiper blade. E93785 4. Rotate the wiper blade. 5. Move in the direction shown. E93784 E93786 3. Release the lock. 6. Remove the wiper blade. Install in the reverse order.

• Page 162: Changing A Bulb

  Maintenance Side Lamp and Direction Indicator CHANGING A BULB WARNINGS Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury. Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury.

• Page 163
  Maintenance Approach Lamp and Side Repeater Rear Lamps Type 1 Tail, Brake, Reversing, Fog Lamp and Direction Indicator E133683 Side repeater Approach lamp Note: These lamps are not serviceable. See an authorized dealer if it fails. Front Fog Lamps E133757 E133681 Note: You cannot separate the fog lamp bulb from the bulb holder.
• Page 164
  Maintenance Type 2 Tail, Brake, Reversing Lamp and Direction Indicator E133685 Direction indicator Tail and brake lamp Reversing lamp E133684 Remove the screws. Tail and brake lamp 2. Remove the lamp lens. 3. Remove the bulb. Direction indicator Reversing lamp License Plate Lamp Fog lamp (left-hand side for Type 1…
• Page 165
  Maintenance Reading Lamp Carefully release the spring clip and remove the lamp. Type 1 2. Remove the connector with bulb. Without Alarm Sensor 3. Remove the bulb. Type 2 E141038 Carefully prise out the lamp. E133687 2. Turn the bulb holder counterclockwise Remove the screws.
• Page 166
  Maintenance Central High Mounted Brake Lamp Type 2 With Alarm Sensor Type 1 E133756 Remove the lamp lens. 2. Remove the screws. 3. Carefully prise out the lamp. E140992 Carefully prise out the lamp. 2. For reading lamps, turn the bulb holder counterclockwise and remove it.

• Page 167: Bulb Specification Chart

  Maintenance Type 2 E134136 4. Disconnect the electrical connector. E134135 5. Remove the bulb holder by pulling it Remove the lamp lens. straight out. 2. Remove the screws. 6. Remove the bulb. 3. Carefully prise out the lamp. BULB SPECIFICATION CHART Bulb Specification Power (watts)

• Page 168
  Maintenance Bulb Specification Power (watts) Reading lamp Center high mount stop lamp Roof bar lamp Bulb replacement is not possible as the bulb is an integral part of the unit. The side repeater lamp unit has to be changed. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 169: Vehicle Care

  Vehicle Care Cleaning the Headlamps CLEANING THE EXTERIOR Note: Do not scrape the headlamp lenses We recommend that you wash your vehicle or use abrasives, alcoholic solvents or regularly with a sponge and lukewarm chemical solvents to clean them. water containing a neutral pH car Note: Do not wipe the headlamps when shampoo.

• Page 170
  Vehicle Care Fabric, Carpets, Cloth Seats, Leather Interior (If Equipped) Headliners and Floor Mats Follow the same procedure as cleaning Note: Avoid soaking any surface. Do not leather seats for cleaning leather use excessive amounts of water to clean instrument panels and leather interior trim the vehicle interior.

• Page 171: Repairing Minor Paint Damage

  You should repair paintwork damage have completed the cleaning process. caused by stones from the road or minor We recommend that you use Ford service scratches as soon as possible. A choice of wheel cleaner. Make sure that you read products are available from an authorized and follow the manufacturer’s instructions.

• Page 172: Wheels And Tires

  Wheels and Tires Only use snow chains of 10 mm or smaller. GENERAL INFORMATION Only use snow chains on the rear axle. For A decal with tire pressure data is located more information on snow chains usage. in the driver’s door opening. See Technical Specifications (page ?).

• Page 173
  Wheels and Tires Single Cab WARNINGS Switch the ignition off and apply park brake fully before lifting vehicle. It is recommended that the wheels of the vehicle be chocked, and that no person should remain in a vehicle that is being jacked. No person should place any portion of their body under a vehicle that is supported by a jack.
• Page 174
  Wheels and Tires Fold the right-hand side seat back forward. 2. Loosen the jack, remove the bolt and remove the jack. Super Cab E133592 E134701 4. Remove the bolt. Pull the release strap. 5. Remove the jack. 2. Remove the rear seats. 6.
• Page 175
  Wheels and Tires 2. Lower the seat back. 2. Fully insert the jack handle into the guide hole. Turn counter-clockwise 3. Remove the locking strap. until the wheel rests on the ground, and 4. Remove the bolt. there is slack in the cable. 5.
• Page 176
  Wheels and Tires E133594 A. Emergency use only. Removing a Road Wheel B. Maintenance WARNINGS Park your vehicle in such a position that neither the traffic nor you are hindered or endangered. Make sure that the wheels are pointing straight ahead. If your vehicle has a manual transmission, move the selector lever to first or reverse gear.
• Page 177
  Wheels and Tires Installing a Road Wheel Note: Do not lay alloy road wheels face down on the ground. WARNINGS Use only approved wheel and tire sizes. Using other sizes could damage the vehicle and will void the warranty. See Technical Specifications (page 176).

• Page 178: Technical Specifications

  Wheels and Tires WARNING Have the wheel nuts checked for tightness and the tire pressure checked as soon as possible. Note: If the spare wheel is different in size or construction to the road wheels, have this replaced as soon as possible. Stowing the Flat Tire WARNING Do not raise the spare wheel carrier…

• Page 179
  Wheels and Tires Tire Pressures (Cold Tires) Tyre Size Normal Load ECO** Full Load Front Rear Front Rear Front Rear 265 / 65 2.4 bar 2.4 bar 2.4 bar 3 bar R17 112T* (SWB Ute) 215/70 2.4 bar 2.4 bar 2.6 bar 2.6 bar 2.6 bar…

• Page 180: Capacities And Specifications

  Capacities and Specifications VEHICLE DIMENSIONS Single cab E174140 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 181
  Capacities and Specifications Item Dimension Description Dimension in mm (inches) Maximum length 5359 (211.0) Maximum length — with bull bars 5434 (214.0) Overall width — excluding exterior mirrors 1850 (72.8) Overall height (4×2) 1703 (67.0) Overall height (4×2 or 4×4) 1800-1806 (70.9-71.1) Wheelbase 3220 (126.8)
• Page 182
  Capacities and Specifications E131996 Item Dimension Description Dimension in mm (inches) Maximum length 5359 (211.0) Overall width — excluding exterior mirrors 1850 (72.8) Overall height (4×2) 1706 (67.2) Overall height (4×2 or 4×4) 1804-1810 (71.0-71.2) Wheelbase 3220 (126.8) Track — front and rear (4×2) 1590 (62.6) Track — front and rear (4×2 or 4×4)
• Page 183
  Capacities and Specifications Double cab E131994 E174619 Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 184: Vehicle Identification Plate

  Capacities and Specifications Item Dimension Description Dimension in mm (inches) Maximum length 5359 (211.0) Maximum length — with bull bars 5434 (214.0) Overall width — excluding exterior mirrors 1850 (72.8) Overall height (4×2) 1716 (67.5) Overall height (4×2 or 4×4) 1815-1848 (71.4-72.8) Wheelbase 3220 (126.8)

• Page 185
  Capacities and Specifications E133363 The vehicle identification number is also stamped beneath the front door on the chassis, on the right-hand side. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…

• Page 186: Audio System

  • There are two different modes for MP3 function correctly when used in Ford CD and WMA disc playback: MP3 and players. WMA track mode (system default) and Note: Do not insert CDs with homemade MP3 and WMA folder mode.

• Page 187: Audio Unit — Vehicles With: Am/Fm

  Audio System • MP3 and WMA folder mode represents In track mode, the system displays and a folder structure consisting of one plays the structure as if it were only one level of folders. The CD player numbers level deep (all MP3 and WMA files play, all MP3 and WMA tracks on the disc regardless of being in a specific folder).

• Page 188
  Audio System CD eject. Volume and menu. CD slot. Seek, fast forward and reverse. Display. Power. AM/FM. Scan/AS. Shuffle. Repeat. Next folder. Previous folder. Scroll display. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 189
  Audio System Menu back. CD or AUX. Next Folder Volume and Menu Press to go to the next folder in CD. Turn to adjust the volume, or scroll through on-screen choices. Previous Folder Seek, Fast Forward and Reverse Press to go to the previous folder in CD. In radio mode, select a frequency band and Scroll Display press either button.

• Page 190: Audio Unit — Vehicles With: Am/Fm/Cd/Sync

  Audio System Autostore Control 2. Short press SCAN/AS, the radio automatically scans up the selected This stores up to a maximum of the six waveband. strongest signals available, either from the 3. Short press SCAN/AS again to AM or the FM waveband and overwrites continue listening to a station.

• Page 191
  Audio System E248391 Eject: Press to eject a CD. CD: Press to listen to a CD, it also cancels the menu or list browsing. Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction.
• Page 192
  Audio System TA: Press to switch traffic announcements on or off and cancels announcements during an active announcement. Note: Traffic announcements may not be available in all areas. MENU: Press to access different audio system features. SOUND: Press to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings.

• Page 193: Audio Unit — Vehicles With: Am/Fm/Cd/ Am/Fm/Cd/Sync

  Audio System Autostore Control Traffic Announcement Volume Traffic announcements interrupt normal This stores up to a maximum of the six broadcasts at a preset minimum level that strongest signals available, either from the is usually louder than normal listening AM or the FM waveband and overwrites volumes.

• Page 194
  Audio System Note: An integrated multi-function display, above the audio system shows important information about your audio system controls. E247756 Function buttons. Seek, fast forward and reverse. Volume and power. OK and cursor arrows. Number block. Info. Sound. Menu. Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 195
  Audio System Phone. Aux. Radio. Cd eject. CD slot. Seek, Fast Forward and Reverse Function Buttons In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In CD mode, press to select the next or previous track.
• Page 196
  Audio System Info On, Off Control Press to access radio, CD, USB and device Press the On, Off control. This also information. operates the unit for up to one hour after you switch the ignition off. Sound The radio automatically turns off after one hour.
• Page 197
  Audio System 3. Press OK to continue listening to a 2. When the search is complete, sound station. returns and the strongest signals are stored on the autostore presets. Scan Tuning Traffic Information Control Scan allows you to listen to a few seconds of each station detected.
• Page 198
  Audio System To adjust the preset volume: Changing the DSP Settings • Use the volume control to make the Press MENU. necessary adjustment during an 2. Select Audio or Audio settings. incoming traffic announcement broadcast. The display shows the level. 3.

• Page 199: Audio Unit — Vehicles With: Am/Fm/Cd/ Sync/Navigation System

  Audio System When selected, the unit continually Regional mode ON: This prevents random evaluates signal strength and, if a better alternative frequency switches when signal becomes available, the unit switches neighboring regional networks are not to that alternative. It mutes while it checks carrying the same programming.

• Page 200
  Audio System E135352 Function button 1: Press the button to select different functions of the audio system depending on which mode (i.e. radio or CD) you are in. Function button 2: Press the button to select different functions of the audio system depending on which mode (i.e.
• Page 201
  Audio System OK: Press the button to confirm on-screen selections. Numeric keypad: Press the button to recall a previously stored station. To store a favorite station press and hold until the sound returns. In CD mode, press a number to select a track. In phone mode, use the buttons to dial a phone number.
• Page 202
  Audio System Station Tuning Control Seek Tuning Select a waveband and briefly press one of the seek buttons. The unit will stop at the first station it finds in the direction you have chosen. Manual Tuning Press function button 2. 2.
• Page 203
  Audio System Note: When you drive to another part of the Note: If TA is on and you select a preset or country, stations that broadcast on manual tune to a non TA station no traffic alternative frequencies and are stored on announcement will be heard.
• Page 204
  Audio System 5. Press the MENU button to return. It will restore radio reception when it finds one or if one is not found, the unit will News Broadcasts return to the original stored frequency. When selected, AF will be shown in the Your audio unit may interrupt normal display.

• Page 205: Audio System Security

  Audio System 4. Make sure that the complete Keycode AUDIO SYSTEM SECURITY is correct before pressing either the * key or OK button to confirm it. Security Code Each unit incorporates a unique code that AUDIO UNIT CLOCK AND DATE is needed to activate the audio system DISPLAYS when the vehicle battery has been…

• Page 206: Compact Disc Player

  Audio System Track Selection 3. Press OK or right arrow to enter clock settings. • Press the seek up once to move to the 4. Use the up and down arrow to select next track or press it repeatedly to the set time.

• Page 207
  Audio System Type Three Type Two Note: When an MP3 CD is playing, the Note: When an MP3 CD is playing, the system can shuffle tracks for the whole CD, system can scan tracks on the CD or within or within the current folder. the current folder.
• Page 208
  Audio System Folder names can be no longer than eight The following discs take a longer time to characters. There can be no more than start playback: eight folder levels (trees). Level 2 • A disc recorded with complicated tree specifications allow file names up to 31 structure.
• Page 209
  Audio System MP3 Navigation You can record MP3 tracks on the CD in several ways. You can place them in the root directory like a conventional audio CD, or in folders that may represent categories, such as album, artist, or genre. The normal playing sequence on CDs with multiple folders is: •…

• Page 210: Audio Input Jack

  Audio System When an audio disc with CD text is playing, limited information encoded in each track displays. Such information normally includes: • The disc name. • The artist name. • The track name. Ending Compact Disc Playback To restore radio reception on all units, press RADIO.

• Page 211: Usb Port

  Audio System Note: For optimum performance when Type 2 using any auxiliary device set the volume on the device high. This reduces audio interference when charging the device using the vehicle power supply. Note: For safety reasons, do not connect or adjust the settings on your device while your vehicle is moving.

• Page 212: Sync

  SYNC (If Equipped) GENERAL INFORMATION Note: This manual describes product • Read incoming SMS text messages features and options available throughout aloud from your cell phone (This is a the range, sometimes even before they are phone-dependent feature.) generally available. It may describe options •…

• Page 213
  For further support, see an authorized system while driving can distract dealer. For more information, visit the your attention away from the road, regional Ford website and possibly cause an accident or other www.fordsync.com. serious consequences. Do not change Menu Structure — SYNC…
• Page 214
  Mobile Apps (If Equipped) settings. This operation will NOT erase The system enables voice and manual your indexed information. (phonebook, call control of Ford Applink enabled history, text messages and paired devices) smartphone apps. Once an app is running Master reset…
• Page 215
  SYNC (If Equipped) Phone Call history Incoming calls Outgoing calls Missed calls Speed Dial Text messaging BT Devices Phone settings Set as master Phonebook pref. Auto download Add contacts Download now Delete Set ringtone Ringtone 1 Ringtone 2 Ringtone 3 Phone ringtone Ringtone off Phone status…
• Page 216
  SYNC (If Equipped) Driving Restrictions Allows you to call numbers which have been stored as speed dial. For your safety, certain features are BT Devices speed-dependent and restricted when your vehicle is traveling over 5 km/h. Allows you to add, delete, connect, disconnect and set a primary device.

• Page 217: Using Voice Recognition

  (read and unread), special equipment and access to the and call history, including history of calls vehicle’s SYNC module. Ford Motor when your cell phone was not connected Company will not access the system data to the system. In addition, if you connect…

• Page 218
  SYNC (If Equipped) Helpful Hints • To cancel the on going voice session, say «CANCEL» or press seek up or seek • Any external noise such as wind noise down arrow button. and road vibrations may prevent the • To say the commands directly without system from correctly recognizing the listening to system prompts, press the voice commands.

• Page 219: Using Sync With Your Phone

  SYNC (If Equipped) When You Say The System «CONFIRMATION PROMPTS OFF» Makes a best guess from the command; you may still occasionally be asked to confirm settings. «CONFIRMATION PROMPTS ON» Clarifies your voice command with a short question. For example say, «1» after the tone to call The system creates candidate lists when John Doe at home or «2»…

• Page 220
  SYNC (If Equipped) End call Note: When the phonebook is downloaded from a cell phone onto the SYNC system, E172509 on most phones it will only download the contacts stored in the phone s memory and Volume up not those stored on the SIM card. Some phones support the transfer of contacts E172506 from the SIM card to the SYNC system.
• Page 221
  SYNC (If Equipped) Depending on your phone’s capability and Press the PHONE button and system will your location, the system may prompt you search paired Bluetooth device. with questions such as setting the current If there are several Bluetooth devices in phone as the primary phone (the phone vehicle, system will try to connect to the SYNC automatically tries to connect with…
• Page 222
  SYNC (If Equipped) Phone Voice Commands 3. Press the up or down arrow buttons until Phonebook pref. is shown and Overview press OK. 4. Press the up or down arrow buttons The overview below shows the available until Download now is shown and voice commands.
• Page 223
  SYNC (If Equipped) «DIAL» «CLEAR» «123» (one-two-three). «121» (one-two-one), etc. Delete the last input digit or character. Delete all entered digits or characters. Note: To exit dial mode, press and hold the Note: «DIAL» command is used to call by PHONE button or press MENU to go to the entering a number and cannot be used for Phone menu.
• Page 224
  SYNC (If Equipped) «DIAL». Ending a call 2. System will ask «Start to say a phone Press the END CALL button to end a call. number». Redialing a number 3. You can say the desired number <0-9>. Press the PHONE button. 4.
• Page 225
  SYNC (If Equipped) 3. Press the up or down arrow buttons to Setting up a multi-party call select Speed dial. When you are in a call and want to invite 4. Locate the desired phone number. another person to join the call, you can: 5.
• Page 226
  OK button. Note: Each text message will be sent with Press the button mapped to Send. the signature «This message was sent from my Ford.” 8. Press the button mapped to Yes to confirm. SYNC allows you to receive, send, download and delete text messages.

• Page 227: Sync Applications And Services

  Ford Applink enabled display. smartphone apps. Once an app is running through Ford Applink , you can control 5. Press the up or down arrow buttons to the main features of the app through voice select Forward msg and press OK commands and manual controls.

• Page 228
  SYNC (If Equipped) Note: If a Ford Applink™ compatible app To Access Using Voice Commands cannot be found, please make sure the Push the VOICE BUTTON. required app is running on the mobile device. 2. Say the name of the application after Accessing an App’s Menu…
• Page 229
  Push notification Data is sent to Ford in the United States may be particularly useful for news or through the connected device. The location based apps.
• Page 230
  Emergency Assistance Note: For important information regarding airbag deployment. See Owner Manual. WARNINGS Note: Ford is not the provider of the For this feature to work, your mobile emergency services contacted by SYNC phone must be Bluetooth-enabled when an emergency call is initiated. Ford and compatible with the system.
• Page 231
  Emergency Assistance can call the reminder only without a voice reminder emergency services. See your regional when the cell phone connects and your Ford website for details at vehicle starts. www.fordsync.com To Make Sure That Emergency In the Event of a Crash…

• Page 232: Using Sync With Your Media Player

  • After the delivery of the introductory Emergency Assistance call cannot be message the voice line will open so placed. See your regional Ford website that you can have a hands-free for details at www.fordsync.com conversation with the emergency Important Information about Ford operator.

• Page 233
  SYNC (If Equipped) SYNC is capable of hosting most digital When first plugged in, SYNC will index all media players in the market including: available music content and prepare the iPod®, «Plays from device» players, and voice commands. This can take from a few most USB drives.
• Page 234
  SYNC (If Equipped) «USB» «SHUFFLE ALL ON» «SEARCH ARTIST <name>» «SHUFFLE OFF» <name> is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. Voice commands which are not available until indexing is complete. Note: At any time, you may press the Voice Command Guide VOICE BUTTON and say «HELP»…

• Page 235: Sync Troubleshooting

  SYNC (If Equipped) Connecting Your Digital Media Connecting Your Digital Media Player to SYNC via the AUX Port Player to SYNC via Bluetooth® Note: At any time, you may press the SYNC allows users to stream music from VOICE BUTTON and say «HELP» for their Bluetooth-enabled cell phone or assistance.

• Page 236
  SYNC (If Equipped) Phone Issues Issue Possible Cause(s) Possible Solution(s) A lot of background noise The audio control settings Review your phone’s user during a phone call. on your phone may be guide regarding audio affecting SYNC perform- adjustments. ance. During a call, I can hear the Possible phone malfunction.
• Page 237
  SYNC (If Equipped) Phone Issues Issue Possible Cause(s) Possible Solution(s) · Check the security and «auto accept/prompt always» settings relative to the SYNC Bluetooth connection on your phone. · Update your device’s firm- ware. · Turn off the Auto phone- book download setting.
• Page 238
  SYNC (If Equipped) Phone Issues Issue Possible Cause(s) Possible Solution(s) · If all contacts in SYNC phonebook can’t be accessed via voice commands, please double check whether your phone- book has been downloaded correctly, and then check contact names are the same as what you said.
• Page 239
  SYNC (If Equipped) USB/Media Issues Issue Possible Cause(s) Possible Solution(s) · Make sure that the device does not have an auto- install program or active security settings. SYNC does not recognize This is a device limitation. Make sure you are not my device when I turn on the leaving the device in your vehicle.
• Page 240
  SYNC (If Equipped) USB/Media Issues Issue Possible Cause(s) Possible Solution(s) · The voice commands for playing specified artist/ album/genre/title are effective only for USB devices. If your device connected to SYNC via AUX or bluetooth, these voice commands are not effective. All songs can not be played Possible device malfunction.
• Page 241
  SYNC (If Equipped) Voice Command Issues Issue Possible Cause(s) Possible Solution(s) · Be aware of the system’s sensitivities; yelling or speaking the voice commands too slowly does not help. Remember to speak the voice commands with a normal smooth, steady and confident voice. System could not hear me.
• Page 242
  SYNC (If Equipped) Voice Command Issues Issue Possible Cause(s) Possible Solution(s) · Do not use special charac- ters in the title as the system does not recognize them. SYNC does not understand · You may be using the · Review the phone voice or is calling the wrong wrong voice commands.
• Page 243
  AppLink. Also, some may have a «Ford SYNC» setting, so check the app’s settings or service menu on the phone. My phone is connected, my…
• Page 244
  SYNC (If Equipped) AppLink issues Issue Possible cause(s) Possible solution(s) On an iPhone with iOS7+, to force close an app, double tab the home button then swipe up on the app to close it. Tab the home button again, then select the app again to restart it.
• Page 245
  SYNC phone listed in SYNC’s bluetooth ports apps can to find. If the app has a «Ford Mobile Apps Menu. use to connect. If you have SYNC» setting, disable that more AppLink apps on your…

• Page 246: Navigation

  For map updates and system upgrades, with soap and water. see an authorized dealer. Note: You can only use Ford licensed data. Note: Do not switch the ignition on or attempt to start the engine while the Road Safety software is updating.

• Page 247
  Navigation Note: You are ultimately responsible for Note: After first entry, the country selected the safe operation of your vehicle and must will remain the default option until you evaluate whether it is safe to follow route manually change it. suggestions.
• Page 248
  Navigation Navigation City/postcode Street District Start guidance Traffic TMC for route All TMC Block next section Route sections list Unblock route sections Home address Start guidance Change address Last destinations Favourites Favourites (A-Z) Points of interest POIs nearby Near destination Along motorway POIs near address Search by name…
• Page 249
  Navigation Navigation Normal Fast Eco settings Trailer: Roof box Dynamic Motorway Tunnel Ferry/motorail Toll Seasonal roads Toll sticker Special functions GPS info System info Enter position Demo mode Map display Map content Arrows on map: Nav time display: Map heading up Best contrast Assistance options Signs / lane…
• Page 250
  Navigation Navigation Delete home address Clear all Reset all settings Eco Settings Route Options Trailer Press the NAV button and scroll to Route options. You can then set your route Use this feature to change the economy options for any of the following. settings of your journey relating to whether or not you are towing a trailer and if so the Route…
• Page 251
  Navigation Information Toll When switched off the system will avoid Press the information button to view toll roads on your route and automatically details of your current location or journey. update your route distance and timings. During active route guidance pressing this button will repeat the last navigation Seasonal Roads instruction.
• Page 252
  Navigation When You Select You Can Store position Store and name your current position. This will automatic- ally save in your favorites. Route options Set your route options from the available list. Special functions Select GPS and system information or a demonstration of the system functionality.
• Page 253
  Navigation Adjusting the Navigation Voice Level You can change the way the map is displayed by altering the zoom and You can adjust the voice prompt level orientation settings. Press function button during an active voice prompt by using the one.
• Page 254
  Navigation Once an active route is underway, guidance will be given by on-screen information and voice prompts. Whichever audio source you wish to leave the unit in, basic turn by turn and distance information will remain on the screen in the form of a graphic inset. You do not need to leave the unit on the main navigation screen when you are navigating a route.

• Page 255: Appendices

  Appendices ELECTROMAGNETIC WARNINGS The RF (radio frequency) transmitter COMPATIBILITY equipment (e.g. cellular telephones, amateur radio transmitters etc.) may WARNINGS only be fitted to your vehicle if they comply Your vehicle has been tested and with the parameters shown in the table certified to legislations relating to below.

• Page 256: End User License Agreement

  You have acquired a device («DEVICE») Check all electrical equipment: that includes software licensed by • with the ignition ON FORD MOTOR COMPANY from an affiliate of Microsoft Corporation • with the engine running («MS») . Those installed software •…

• Page 257
  «online» or electronic FORD MOTOR COMPANY or its third documentation («FORD SOFTWARE») party software and service providers. are protected by international intellectual property laws and treaties.
• Page 258
  (e.g., in the user • Consent to Use of Data: You agree documentation and in the software). that MS, Microsoft Corporation, FORD Even if you receive multiple EULAs, you MOTOR COMPANY, third party are licensed to use only one (1) copy of software and systems suppliers, their the SOFTWARE.
• Page 259
  SOFTWARE («Supplemental endorsement of the third party site by Components»). MS, Microsoft Corporation, their affiliates and/or their designated If FORD MOTOR COMPANY or third party agent. software and services suppliers provide or make available to you Supplemental • Obligation to Drive Responsibly:…
• Page 260
  All title and intellectual property rights in you any rights in connection with any and to the SOFTWARE (including but not trademarks or service marks of FORD limited to any images, photographs, MOTOR COMPANY, MS, Microsoft animations, video, audio, music, text and Corporation, third party software or service «applets»…
• Page 261
  (using your hands) while driving. Stop the Information vehicle in a safe and legal manner before attempting these operations. This is This system Ford SYNC contains software important since while setting up or that is licensed to Manufacturer FORD changing some functions you might be…

• Page 262: Type Approvals

  The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners.

• Page 263: Map Updates

  Map updates The road network is constantly changing due to new roads, changes in road classification, etc. Therefore, it is not always possible to exactly match the map data in the system to the current road network. Map information is regularly updated, but all areas are not necessarily covered to the same level of detail.

• Page 264
  Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 265
  Index Parking brake warning……..56 Restraints back-up warning……56 Safety belt minder……….56 Audio Control………..35 See: Four-Wheel Drive……..96 Type 1…………….36 Type 2……………36 Audio Input Jack……….208 Audio System……….184 General Information……….184 See: Climate Control……….64 Audio System Security……203 About This Manual………..5 Security Code…………203 Audio Troubleshooting……209 See: Brakes…………102 Audio Unit Clock and Date ABS driving hints Displays…………203…
• Page 266
  Index News Broadcasts……….202 If Your Vehicle Gets Stuck In Mud or On, Off Control………..200 Snow…………..95 Regional Mode…………202 Selector lever positions……..92 Station Preset Buttons……..200 SelectShift Automatic Station Tuning Control……..200 Transmission………….93 Autowipers…………38 Traffic Information Control……201 Auxiliary Power Points……..79 Waveband Button……….200 Audio Unit — Vehicles With: AM/FM/CD/ 12 Volt DC Power Point……..79 SYNC…………..188 Location…………..79…
• Page 267
  Index Locking Wheel Nuts………..170 Shuffle and Random……..204 Removing a Road Wheel……..174 Track Selection………..204 Coolant Check Spare Wheel…………173 Stowing the Flat Tire……….176 See: Engine Coolant Check……155 Cool Box…………80 Vehicle Jack…………170 Cruise Control……….37 Vehicles with a Spare Wheel……170 Changing the 12V Battery……158 Principle of Operation……..115 Cruise control Auxiliary Battery……….158…
• Page 268
  Index Manual Folding and Unfolding…….49 Passenger Side………….80 Power Exterior Mirrors……..48 Handbrake Floor Mats…………129 See: Parking Brake……….102 Fog Lamps — Front Hazard Flashers……….131 See: Front Fog Lamps……..42 Four-Wheel Drive………..96 See: Using Hill Descent Control….108 Headlamp Exit Delay……..42 Principle of Operation……..96 Front Exterior Overview……..9 Headlamp Leveling……..44 Front Fog Lamps……….42 Headrest…
• Page 269
  Index Instrument Cluster……….51 Locking and unlocking the doors with the Instrument Lighting Dimmer…..42 remote control……….30 Instrument Panel Overview……12 Locking the doors individually with the Interior Lamps……….45 key……………..32 Luggage Covers……….116 Courtesy lamp…………45 Reading lamps…………46 Locking and unlocking into position…..116 Interior Mirror………..49 Operation…………..116 Lug Nuts Automatic Dimming Mirror……50…
• Page 270
  Index Setting a Route………..245 Setting Your Navigation Preferences..249 Type Approvals………..252 Rear Axle…………101 Rear Exterior Overview………10 Rear Seat Armrest……….81 Rear Seats…………76 Oil Check Folding the Seat Backrest………77 See: Engine Oil Check……..154 Folding the Seat Cushion……..76 Opening and Closing the Hood….146 Unfolding the Seat Backrest……77 Closing the hood……….147 Unfolding the Seat Cushion……77 Opening the hood……….146…
• Page 271
  Symbols Glossary……….5 Duratorq-TDCi (Puma) Diesel…..148 SYNC Applications and Services..225 Under Hood Overview — 2.5L Duratec-HE Emergency Assistance……..228 (122kW/165PS) — MI4……150 Mobile Apps (Ford Applink )……225 Under Hood Overview — 3.2L SYNC …………210 Duratorq-TDCi (Puma) Diesel….152 General Information……….210 USB Port…………209 SYNC Troubleshooting……233…
• Page 272
  Index Using Four-Wheel Drive……96 System Interaction and Feedback….216 Using Winter Tires……..170 Driving in Special Conditions With Four-Wheel Drive……….97 Four-Wheel Drive, High Range (4H)…..96 Four-Wheel Drive, Low Range (4L)….96 Vehicle Care…………167 Shifting Between 2H and 4H……96 Vehicle Dimensions……..178 Shifting Between 2H and 4L……97 Shifting Between 4H and 4L……97 4-door stretch cab……….179 Two-Wheel Drive, High Range (2H)…..96…
• Page 273
  Index Oil pressure warning lamp……..53 Rear fog lamp indicator……..55 Safety belt indicator……….55 Stability control (ESP) indicator….52 Vehicle immobilizer indicator……52 Washer fluid level indicator……54 Water-in-fuel indicator (Diesel only)…54 Washer Fluid Check……..157 Washers See: Cleaning the Exterior……..167 See: Wipers and Washers………38 Wheel Nuts See: Changing a Road Wheel……170 Wheels and Tires……….170 General Information……….170…
• Page 274
  Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing…
• Page 276
  DB39-120609-JB…

Table of Contents

Introduction

REPLACEMENT PARTS

RECOMMENDATION

Genuine Ford parts and accessories have been designed specifically for your vehicle. Unless we have specifically stated, we have not tested non-Ford parts and accessories and, therefore, we will not guarantee that they are suitable for your vehicle. We recommend that you ask your Ford Dealer for advice on parts and accessories suitable for your vehicle.

At a Glance

Instrument panel overview — Left-hand drive

Press the lock button twice within three seconds to double lock the doors.

Adjusting the steering wheel

WARNING

Never adjust the steering wheel when the vehicle is moving.

See AdjustingtheSteeringWheel (page 37).

Manual climate control

Recommended settings for cooling

WARNING

Make sure that you fully engage the locking lever when returning it to its original position.

Select the outside air.

Open the centre and side air vents.

Direct the centre air vents upwards and the side air vents toward the side windows.

X Not suitable for children in this mass group.

U Suitable for universal category child seats approved for use in this mass group.

U¹ Suitable for universal category child seats approved for use in this mass group. However, we recommend that you secure children in a government approved child seat, in the rear seat.

UF¹ Suitable for universal category forward facing child seats approved for use in this mass group. However, we recommend that you secure children in a government approved child seat, in the rear seat.

ISOFIX child seats — Double cab

Not ISOFIX equipped

Seat type

IL Suitable for particular ISOFIX child restraints systems of the semi-universal category. Please consult child restraints systems suppliers’ vehicle recommendation lists.

IUF Suitable for ISOFIX forward facing child restraints systems of universal category approved for use in this mass group and ISOFIX size class.

*The ISOFIX size class for both universal and semi-universal child restraints systems is defined by the capital letters A to G. These identification letters are displayed on ISOFIX child restraints.

**At time of publishing the recommended Group O+ ISOFIX baby safety seat is the Britax Roemer Baby Safe. Please consult your Dealer for the latest details relating to Ford recommended child seats.

***At time of publishing the recommended Group 1 ISOFIX child seat is the Britax Roemer

Safefix PLUS. Please consult your Dealer for the latest details relating to Ford recommended child seats.

CHILD SAFETY LOCKS

WARNING

You cannot open the doors from inside if you have put the child safety locks on.

Left-hand side

Turn anti-clockwise to lock and clockwise to unlock.

To close all the windows, press and hold the remote control lock button for at least two seconds. Press any remote control button again to stop the closing function. The anti-trap function is also active during global closing.

Alarm

ARMING THE ALARM

To arm the alarm, lock the vehicle. See Locks (page 30).

DISARMING THE ALARM

Disarm and silence the alarm by unlocking the doors with the key and inserting the key into the ignition switch with a correctly coded key within 12 seconds, or unlocking the doors with the remote control.

Steering Wheel

Press and hold the seek button to:

•tune the radio up or down the frequency band

•seek through a CD track.

VOICE CONTROL

A Voice control

Press the voice control button to select or deselect voice control.

For further information: See Voicecontrol (page 216).

Service position

1.Turn the ignition key to position 0 from position II.

2.Pull the washer lever towards the steering wheel within three seconds.

Note: Make sure that the wiper blade locks into place.

Install in the reverse order.

LIGHTING CONTROL

Lighting control positions

A Direction indicator

B Side lamp

1. Remove the bulb holder from the headlamp assembly.

2. Remove the bulb.

1.Open the bonnet. See Opening and Closing the Bonnet (page 138).

2.Disconnect the electrical connector by pressing in the spring releases on both sides of the connector.

3.Remove the rubber boot.

4.Release the bulb retaining spring clip and remove the bulb.

5.Insert the replacement bulb and retain it using the spring clip.