G shock mtg s1000d инструкция на русском

Casio MTG-S1000 / линейка G-Shock / модуль 5369 / год 2015

Инструкция к модулю Casio 5369

• Смотреть онлайн → (без скачивания, удобно на мобильных и планшетах);
• Скачать русскую инструкцию →  (типичная “как у всех”, не всегда понятные картинки);
• Скачать английскую инструкцию → (детальная, много фото, более понятная).

Сложно настроить? Спрашивай на форуме G-Shock →

Читайте новости о любимых часах MTG-S1000 на блоге
[display-posts tag=”MTG-S1000″ posts_per_page=”4″]

Все новости о MTG-S1000 →

Побывайте на заводе Casio, следите за новинками G-Shock…

 

Перейти к контенту

Русские электронные инструкции по эксплуатации

Постоянно обновляемый большой каталог документации по эксплуатации и использованию современных устройств и оборудования на русском языке. Бесплатное скачивание файлов.

Поиск:

Operation Guide 5369 (MTG)

E

ENGLISH

Congratulations upon your selection of this CASIO watch.

x Note that the product illustrations in this manual are intended for reference only, and so the actual

product may appear somewhat different than depicted by an illustration.

This watch does not have a city code that corresponds to the UTC offset of –3.5 hours. Because of

this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland,

Canada.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by

you or any third party arising through the use of this product or its malfunction.

E-7

Contents

E-1 About This Manual

E-2 Using the Crown

E-5 Things to check before using the watch

E-10 Charging the Watch

E-13 To recover from the sleep state

E-14 Radio Controlled Atomic Timekeeping

E-16 To get ready for a receive operation

E-18 To perform manual receive

E-19 To check the result of the latest receive operation

E-19 To turn auto receive on and off

E-21 Mode Reference Guide

E-23 Timekeeping (Dual Time Mode)

E-24 Confi guring Home City Settings

E-24 To confi gure Home City settings

E-27 To switch between standard time and summer time manually

E-28 Confi guring Current Time and Date Settings Manually

E-28 To change the current time and date setting manually

E-6

3. Set the current time.

x To set the time using a time calibration signal

See “To get ready for a receive operation” (page E-16).

x To set the time manually

See “Confi guring Current Time and Date Settings Manually” (page E-28).

The watch is now ready for use.

x For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic

Timekeeping” (page E-14).

E-5

Things to check before using the watch

1. Observe the movement of the

Second Hand.

Is the

Second Hand moving smoothly at one-second intervals?

Is the

Second Hand moving at two-second

intervals or is it stopped completely?

Go to step 2.

The watch is charged. For details about

charging, see “Charging the Watch”

(page E-10).

Power is low. Charge the watch by placing it in a

location where it is exposed to light. For details,

see “Charging the Watch” (page E-10).

NO

YES

YES

NEXT

2. Check the Home City.

Use the procedure under “To confi gure Home City settings” (page E-24) to confi gure your Home City.

Important!

x Proper time calibration signal reception depends on correct Home City, time, and date settings in the

Dual Time Mode. Make sure you confi gure these settings correctly.

E-4

To start HS1 high-speed movement

While the crown is pulled out, rotate it rapidly three turns away from you (for

forward movement) or towards you (for reverse movement). High-speed

movement will continue even if you release the crown.

To start HS2 high-speed movement

While HS1 high-speed movement is progress, again rotate the crown rapidly

three turns in the same direction as the current HS1 movement (away from you

for forward movement or towards you for reverse movement).

To stop high-speed movement

Rotate the crown in the direction that is opposite that of the current high-speed

movement or press any button.

Important!

x Leaving the crown pulled out for more than two minutes (approximately 30 minutes in the case of hand

home position adjustment) without performing any operation will automatically cause crown operations

to become disabled. If this happens, press the crown back in, pull it out, and then start the operation

over again.

E-3

Crown Operations

The crown can be pulled out to one of two (click) positions. Never apply undue force when pulling out the

crown.

Important!

x In order to ensure full water resistance and to prevent damage due to impact, make sure that the crown

is normally pushed in fully when using the watch.

x When pulling out the crown, avoid using undue force, which creates the risk of personal injury to your

fi ngers and fi ngernails, and of watch malfunction.

First click Second click

High-speed Movement

When setting a time or when performing home position adjustment (page E-45), you can move the hands

either forward or back at high speed. There are two high-speed levels: HS1 and HS2 (faster than HS1).

E-2

Using the Crown

This watch has a lock-type crown.

Important!

x You should normally have the crown locked during normal daily use. Leaving the crown unlocked

creates the risk of unintended operations or even damage due to impact.

To lock the crown

1. Push the crown back in.

x Note that attempting to lock the crown when it is not pushed in can cause

unexpected watch operation.

2. Rotate the crown Mark 3 is aligned with Mark 1.

3. While pushing in on the crown (a), rotate it to the right (b) until it stops and Mark 3

is aligned with Mark 2.

4. Gently pull on the crown to make sure it is securely locked and does not come

out.

To unlock the crown

Rotate the crown so Mark 3 aligns with Mark 1.

Mark 1

Mark 3

W

V

Mark 2

E-1

About This Manual

Operations are performed using the watch’s crown, and the three buttons

indicated by the letters A, B and C in this manual.

Hand Functions

Hour Hand

Second Hand

Minute Hand

Hour Hand (24-hour)

Small Minute Hand

Small Hour Hand

Small Hour Hand (24-hour)

Lower Dial Hand

Day Indicator

This User’s Guide uses numbers shown above to identify watch hands and

indicators.

Hand and Date Indicator Movement

x The movement of the

Second Hand and

Minute Hand of this watch are coordinated. To change

the

Minute Hand setting, you will need to move the

Second Hand.

x

Day Indicator movement is also coordinated with

Hour Hand movement. To change the

Day

Indicator setting, you will need to move the

Hour Hand.



MA1312-EA

#!3)/#/-054%2#/,4$

Вы можете задать вопрос посетителям сайта по модели CASIO MTG-S1000BD-1A. Если Вы являетесь её пользователем, то пожалуйста оставьте, по возможности развёрнутый отзыв: