Harman kardon avr 247 инструкция на русском

• Page 1
  AVR 247 AUDIO/VIDEO RECEIVER OWNER’S MANUAL…

• Page 2: Safety Information

  SAFETY INFORMATION 1. Read Instructions. All the safety and operating instruc- tions should be read before the product is operated. 2. Retain Instructions. The safety and operating instruc- tions should be retained for future reference. 3. Heed Warnings. All warnings on the product and in the operating instructions should be adhered to.

• Page 3: Important Safety Information

  • Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. • Due to the weight of the AVR 247 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the SAFETY INFORMATION unit’s feet may leave marks on certain wood or veneer materials.

• Page 4
  STAPLE INVOICE HERE…

• Page 5: Table Of Contents

  Step Eight – Program Sources Into the Remote Step Nine – Remote IR Inputs and Output Step Ten – Install a Multiroom System Step Eleven – Turn On the AVR 247 INITIAL SETUP Using the On-Screen Menu System Configure the AVR 247 Using EzSet/EQ…

• Page 6: Introduction

  INTRODUCTION Please register your AVR 247 on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions. Thank you for choosing Harman Kardon…

• Page 7: Audio Inputs

  The AVR 247 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products. Supplied Accessories The following accessory items are supplied with the AVR 247. If any of these items are missing, please contact Harman Kardon customer service at www.harmankardon.com.

• Page 8: Front-Panel Controls

  Remote IR Sensor: from the remote control. It is important to ensure that it is not blocked. If covering the sensor is unavoidable, such as when the AVR 247 is placed inside a cabinet, you may use an optional Harman Kardon HE 1000, or other infrared receiver, connecting it to the Remote IR Input on the AVR 247’s rear panel.

• Page 10: Rear-Panel Connections

  1080i signals received through one of the HDMI Inputs will be passed through directly to the HDMI Output without any video processing. The AVR 247 is Simplay HD-verified for compatibility via the HDMI When the remote IR connection with other Simplay HD-verified products.

• Page 11: Rear-Panel Connections

  RS-232 Mode: Leave this switch popped out in the Operate position unless the AVR 247 is being upgraded. RS-232 Reset: This switch is only used during a software upgrade. A standard processor reset is performed by pressing and holding the front-panel Tone button.

• Page 13: Remote Control Functions

  REMOTE CONTROL FUNCTIONS The AVR 247 remote is capable of controlling 11 devices, including the AVR itself and an iPod docked in the optional The Bridge accessory. During the installation process, you may program the codes for each of your source components into the remote. Each time you wish to use the codes for any component, first press the Selector button for that component.

• Page 14
  IR Transmitter Lens Power On Program Indicator AVR Selector AM/FM XM Radio Test Tone Sleep DSP Surround On-Screen Display Channel Level Digital Input Tuning Mode Direct Station Entry Tuning Tone Mode Night Mode Track Skip Transport Controls Mute Power Off Input Selectors 6-/8-Channel Input Selector TV/Video…

• Page 15: Night Mode

  MULTI INPUT, which is used to select the source input for the remote zone. See Multiroom Operation in the Advanced Functions section for more information on using the AVR 247’s multiroom system. Channel Level: Press this button to adjust the output levels for each channel so that all speakers sound equally loud at the listening position.

• Page 16: Introduction To Home Theater

  Surround sound immerses you in the musical or film presentation for increased realism. The AVR 247 may have up to seven speakers connected directly to it (plus a subwoofer). Each main speaker is powered by its own amplifier channel inside the receiver. When more than two speakers are used, it is called a multichannel system.

• Page 17: Connections

  Figure 3 – Subwoofer Connecting Source Devices to the AVR The AVR 247 is designed to process audio and video input signals, playing back the audio and displaying the video on a television or monitor connected to the AVR. These signals originate in what are known as “source devices,”…

• Page 18: Audio Connections

  In addition, receivers and processors such as the AVR 247 may handle the incoming signal in several different ways, depending on their capability as well. The AVR 247 uses HDMI version 1.2a, and is capable of processing both the audio and video components of the HDMI data, minimizing the number of cable connections in your system.

• Page 19: Analog Audio

  The AVR 247 is only capable of processing one PCM source at a time.

• Page 20: Antennas

  Figure 14 – AM Antenna RS-232 Serial Port The RS-232 serial port on the AVR 247 is used only for data. If Harman Kardon releases a software upgrade for the receiver’s operating system at some time in the future, the upgrade may be downloaded to the AVR using this port.

• Page 21: Speaker Placement

  Placement of the surround speakers depends on the number of speakers in your system. If you’re using only two speakers with the AVR 247, place them in the front left and right positions, and skip to the Installation section. However, Harman Kardon recommends using the AVR 247 in a 5.1- or 7.1-channel configuration for optimal…

• Page 22
  SPEAKER PLACEMENT Left Speaker Output. You will then need to follow the directions in the Advanced Features section for manual setup of the sur- round back speaker. Subwoofer Placement The subwoofer’s location is less critical, since low-frequency sounds are omnidirectional. Placing the subwoofer close to a wall or in a corner will reinforce the low frequencies, and may create a “boomy”…

• Page 23: Installation

  Connect the FM and AM antennas to their terminals. If you have purchased an XM antenna module designed for connection to an XM Ready device, such as the AVR 247, you may connect it now. To enjoy XM Radio, remember to purchase a subscription and activate your antenna module.

• Page 24
  S- or composite video input for that source. However, you may make whatever video connections are best for your system. Table 2 – Recommended Source Component Connections Source Device Type AVR 247 Source Input VCR, DVR, PVR, Video 1 TiVo or other…

• Page 25: Video 4 Source

  However, you may connect any device to any source input. NOTE: The AVR 247 is equipped with a total of six digital audio inputs, not including the HDMI inputs: four on the rear panel (Coaxial 1 and 2, Optical 1 and 2) and two on the front panel (Coaxial 3 and Optical 3).

• Page 26: Dvd/Hdmi 1 & 2/Cd/Tape

  HDMI connection, such as an HD-DVD or Blu-ray Disc player or HDTV tuner. The HDMI sources are not used with any of the 2-channel analog audio or video inputs on the AVR 247. Make sure your video display is HDMI-capable, and for many source devices, the display must be HDCP-compliant (High-Bandwidth Digital ®…

• Page 27: Step Five — Connect The Video Display

  AVR 247. See Figure 33. Make sure this device draws no more than 50 watts. The device should have its mechanical or master power switch turned on, and it will power on any time the AVR 247 is turned on.

• Page 28: Step Seven — Insert Batteries In Remote

  Figure 34 – Remote Battery Compartment When using the remote, remember to point the lens toward the front panel of the AVR 247. Make sure no objects, such as furniture, are blocking the remote’s path to the receiver. Bright lights, fluorescent lights and plasma video displays may interfere with the remote’s functioning.

• Page 29: Step Nine — Remote Ir Inputs And Output

  Remote IR Output to facilitate use of your system with a remote control in a variety of situations. See Figure 36. When the AVR 247 is placed in such a way that aiming the remote at the front-panel IR sensor is difficult, such as inside a cabinet or facing away from the listener, you may connect an external IR receiver, such as the optional Harman Kardon HE 1000, to the Remote IR Input jack.

• Page 30: Step Eleven — Turn On The Avr 247

  Master Power Switch in the ON position, even when the receiver is not being used. Figure 39 – Power Switches 2. There are several ways in which the AVR 247 may be turned on from Standby mode. a) Press the Standby/On Switch on the front panel. See Figure 39.

• Page 31: Initial Setup

  Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 247 to match your actual system. Make sure that you have connected a video display to one of the video monitor outputs on the receiver. When you turn on your display and the AVR, you should see a blue screen.

• Page 32: Configure The Avr 247 Using Ezset/Eq

  See Figure 46. Figure 46 – Plug EzSet/EQ microphone into receiver. Step Three – Make sure that the AVR 247 and the video display are turned on. Press the OSD Button to display the menu system. See Figure 43. Use the Buttons to move the cursor to the Speaker ⁄…

• Page 33: What Ezset/Eq Does

  Figure 52 – EzSet/EQ: Speaker Distance Test NOTE: The AVR 247 is also capable of setting a different type of delay, called A/V Sync Delay, which is used to compensate for lip sync problems that may occur when a video display device or set-top box causes delays while digital video signals are processed.

• Page 34: Configure Sources

  INITIAL SETUP Figure 53 – EzSet/EQ: Speaker Size/Crossover Test At the same time the overall size of the speaker’s frequency range is measured, the AVR will measure the crossover, which is the lowest frequency each of your main speakers is capable of handling effectively, in order to set the highest frequency the subwoofer should reproduce.

• Page 35
  NOTE: If your video display has an HDMI input, then you only need to connect the AVR’s HDMI Output to the display. The AVR 247 transcodes analog source video signals up to 720p from composite, S-video or component video to the HDMI format, and is also capable of upscaling the signal up to 720p to match your display’s capabilities.
• Page 36
  AUTO POLL: The Auto Poll feature is used when both an analog audio and digital audio connection have been made for one source device. If for some reason no digital signal is available, the AVR 247 will switch to the analog inputs for the source. This situation can occur with some cable or satellite television broadcasts, where some channels are broad- cast with digital audio and others with analog audio.

• Page 37: Operation

  See Figure 58. Figure 58 – Power Switches There are several ways in which the AVR 247 may be turned on: a) Press the Standby/On Switch on the front panel. See Figure 58.

• Page 38: Tone Controls

  HDMI 2), and the selector will light in green to indicate that you have selected the source whose name is printed above the button. The AVR 247 will switch to the audio and video inputs assigned to the source. If you selected a surround mode for the source, the AVR 247…

• Page 39: Audio Input Selection

  The VIDEO IN line of the Input Setup menu indicates which of the video inputs on the AVR 247 is assigned to each source. As shown in Table 5, by default the Component Video 1 input is assigned to the DVD source, the Component Video 2 input is assigned to the Video 1 source, and the Component Video 3 input is assigned to the Video 2 source.

• Page 40: Using The Tuner

  Inputs for the audio. Example 1: You would like to connect a DVD-Audio player to the AVR 247. You plan on playing a variety of discs using this player, including conventional DVDs and even CDs as well as multichannel discs. When playing DVDs and CDs, it is preferable to use a digital audio connection to obtain the best sound quality and the benefit of any digital surround formats contained on the DVD.

• Page 41: Xm Radio Operation

  XM Radio is a satellite-delivered service that offers hundreds of program channels, as well as local traffic and weather information for select cities. The AVR 247 is “XM Ready,” which means that it is able to receive the XM service when an optional XM antenna module is connected and the service activated.

• Page 42: Recording

  The Bridge is an optional dock that may be used with a compatible iPod (not included). When The Bridge is connected to its proprietary input on the AVR 247 and the iPod is docked, you may enjoy the audio, video and still-image materials on your iPod through your high-quality audio/video system, operate the iPod using the AVR remote or the AVR’s front-panel controls, view navigation messages on the AVR’s…

• Page 43: Using The Bridge

  Display. The lower line will display the elapsed time of the track on the left, the play mode icon, and the time remaining on the right. In addition, if a video display is connected to the AVR 247, a screen will appear briefly to display information about the iPod’s status and the track.

• Page 44: Selecting A Surround Mode

  Surround mode selection can be as simple or sophisticated as your individual system and tastes. Feel free to experiment with the many available surround modes on the AVR 247, and you may find a few that become your favorites for certain sources or program types. Although…

• Page 45: Advanced Functions

  5.1-channel configuration. New formats, such as Dolby TrueHD and Dolby Digital Plus, may be available in 7.1-channel configurations in the future. The AVR 247 will not be able to play native 7.1-channel programs unless the source device outputs a 5.1- or 6.1-channel version.

• Page 46: Surround Modes

  There is no harm in experimenting with all of the modes available with any given source material. Table 8 offers a brief description of each mode the AVR 247 is capable of using, and also indicates the types of incoming signals or digital bitstreams the mode may be used with.

• Page 47: Dolby Surround Settings

  Default Modes During initial use or after a processor reset, the AVR 247 will default to the Logic 7 7CH Music mode for all analog and PCM audio inputs. Subsequently, when a source input is selected and an analog or PCM signal is received, the AVR will switch to the last surround mode used for that source input/incoming signal combination.

• Page 48
  Dolby Pro Logic IIx modes may be selected not only with Dolby Digital bit- streams, but thanks to the AVR 247’s post-processor, they may also be used with some DTS bitstreams to add a surround back channel to 5.1 modes.
• Page 49
  Surround Mode Description Dolby Pro Logic IIx This mode is similar to Dolby Pro Logic II Music, including the availability Music of center width, dimension and panorama adjustments. Dolby Pro Logic IIx Music adds a surround back channel. In addition, it may be selected even when some types of DTS signals are present.
• Page 50
  Cinema encoding, Logic 7 Cinema mode increases center channel intelligibility. Logic 7 The AVR 247 is programmed at the factory to default to this mode for Music 2-channel signals. Logic 7 Music mode is well suited to conventional 2-channel music recordings.

• Page 51: Manual Setup

  Manual Setup The AVR 247 is flexibly designed to be used with almost any loud- speakers available. The flexibility arises from the AVR 247’s capability to be configured to match the characteristics of your particular speakers, and to compensate for the acoustic characteristics of your room.

• Page 52: Speaker Size Menu

  SURR BACK: Press the Set Button and use the the SMALL, LARGE or NONE setting for the surround back speakers. The AVR 247 is one of the few receivers in its class to include multiroom capability. With assignable surround back amplifier channels, setting up a multiroom system is more convenient than ever, no longer requiring an external amplifier to power the remote speakers.

• Page 53: Speaker Crossover Menu

  • If you set the front speakers to LARGE, you may select from three possible settings for the subwoofer. SUB L/R+LFE: This setting sends all low-frequency information to the subwoofer, including both information that would normally be played through the front left and right speakers and the special low-frequency effects (LFE) channel information.

• Page 54: Step Four — Setting Channel Output Levels Manually

  EzSet/EQ handle this critical task for you, simply and automatically. However, if you prefer to make these adjustments manually, the AVR 247’s Channel Adjust menu allows you to do so, either using the system’s test tone or while playing source material. In addition, this is the only method for adjusting the level of the subwoofer.

• Page 55: Video Adjustments

  Set Button and use the Buttons to adjust the level as desired. If you would like to set your levels using the AVR 247’s internal test tone, adjust the TEST TONE SEQ and TEST TONE lines as follows.

• Page 56: Multiroom Operation

  Tuning Mode Button to select monaural operation for FM radio stations. If you wish to use the AVR 247 with more than one remote room, you will need to purchase a multichannel external amplifier that enables you to connect several pairs of loudspeakers.

• Page 57: Operating The Multiroom System

  AVR 247’s Remote IR Output. You may use the main AVR 247 remote control in the remote zone, or you may purchase a second-zone remote by contacting Harman Kardon customer service through our Web site.

• Page 58: Dim Function

  Set Button to select it. Advanced Remote Control Functions The AVR 247 remote control not only operates the AVR 247, but it also serves as a universal remote that may be programmed to operate many other home theater components, as described in the Installation section.

• Page 59: Macros

  Processor Reset There may be instances when you wish to fully reset the AVR 247 to its factory defaults, or the unit may behave erratically after a power surge. To correct erratic behavior, first try turning the Master Power Switch off and unplugging the AC power cord for at least three minutes.

• Page 60: Troubleshooting Guide

  Remote behaves erratically Additional information on troubleshooting possible problems with your AVR 247, or installation-related issues, may be found in the list of “Frequently Asked Questions” , which is located in the Product Support section of our Web site at www.harmankardon.com.

• Page 61: Technical Specifications

  ™ -verified for compatibility via the HDMI connection with other Simplay HD-verified products. Please register your AVR 247 on our Web site at www.harmankardon.com. NOTE: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions.

• Page 62: Appendix

  APPENDIX Appendix – Default settings, worksheets, remote product codes Table A1 – Source Input Setting Defaults Source HDMI 1 HDMI 2 Title Video Input Comp V 1 HDMI 1 HDMI 2 Audio Input Coax 1 HDMI 1 HDMI 2 Auto Poll Surround Logic 7 Logic 7…

• Page 63
  Table A4 – Source Input Settings Source HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP Title Video Input Audio Input Auto Poll Surround Mode Tone Mode Bass Treble Video Mode Table A5 – Speaker/Channel Settings Source DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel Left/Right Speaker Size…
• Page 64
  APPENDIX Table A6 – Remote Control Codes Source Input Product Type (circle one or fill in) Video 1 VCR, PVR Video 2 Cable, Satellite Video 3 Video 4 CD, CDR Tape Cassette HDMI 1 VCR, PVR, DVD, Cable, Satellite HDMI 2 VCR, PVR, DVD, Cable, Satellite Table A7 –…
• Page 65
  Refer to the numbered buttons in Figure 92 when using the Function List. Figure 92 – Remote Control Function List Reference APPENDIX 52 53…
• Page 66
  APPENDIX Table A8 – Remote Control Function List No. Button Name AVR Function CD/CD-R 1 Power On Power On Power On Power On 2 Power Off Power Off Power Off Power Off 3 Mute Mute Mute Mute 4 AVR AVR Sel e ct AVR Sel e ct AVR Sel e ct 5 DVD/CD…
• Page 67
  Table A8 – continued No. Button Name AVR Function CD/CD-R 43 Memory Memory Audi o or Pl a yl i s t Ti m e 44 Tuning Up Tuning Up Next Chapter Track Direct 45 Direct Direct Tuner Entry Angle Random Play 46 Clear Clear…
• Page 68
  APPENDIX Refer to Tables A9 through A16 when programming the codes for your components into the remote. Table A9 – Remote Control Product Codes – TV TV Manufacturer/Brand Setup Code Number AIWA A MARK ADMIRAL AKAI AMPRO ANAM BLAUPUNKT BROKSONIC CANDLE CAPEHART CENTURION…
• Page 69
  Table A9 – continued TV Manufacturer/Brand Setup Code Number LOGIK LUXMAN MAGNAVOX MARANTZ MATSUI MEMOREX METZ MINERVA MITSUBISHI NATIONAL NIKEI ONKING ONWA OPTONICA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK REALISTIC RUNCO SAMPO SAMSUNG SANYO SCOTT SEARS SHARP SIEMENS…
• Page 70
  APPENDIX Table A10 – Remote Control Product Codes – VCR VCR Manufacturer/Brand Setup Code Number AIWA AKAI 048 108 109 AMPRO AUDIO DYNAMICS 018 048 BROKSONIC 110 147 CANDLE 134 135 CANON 135 140 CAPEHART CITIZEN CRAIG 045 116 DAEWOO 017 094 104 DAYTRON 018 048…
• Page 71
  Table A11 – Remote Control Product Codes – CD CD Manufacturer/Brand Setup Code Number ADCOM 063 069 AIWA 072 111 118 AKAI 050 177 184 AUDIO TECHNICA AUDIOACCESS AUDIOFILE CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER 136 140 141 CASIO 117 166 CLARINETTE DENON 187 188 213…
• Page 72
  APPENDIX Table A12 – Remote Control Product Codes – DVD DVD Manufacturer/Brand Setup Code Number APEX DIGITAL DENON 019 051 003 004 GOLDSTAR/LG 005 055 064 HARMAN KARDON 001 002 068 MAGNAVOX MARANTZ MITSUBISHI ONKYO 009 048 PANASONIC 024 030 044 PHILIPS PIONEER 041 065…
• Page 73
  Table A14 – Remote Control Product Codes – TAPE Tape Manufacturer/Brand Setup Code Number HARMAN KARDON Table A15 – Remote Control Product Codes – CBL CBL Manufacturer/Brand Setup Code Number 001 011 ALLEGRO AMERICAST ARCHER BELCOR CABLE STAR 033 113 CITIZEN COLOUR VOICE 085 090…
• Page 74
  NOTES…
• Page 75
  NOTES…
• Page 76
  ® 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2007 Harman International Industries, Incorporated. All rights reserved. Part No. CQX1A1184Z…

AVR 247

AUDIO/VIDEO RECEIVER

OWNER’S MANUAL

AVR247om.qxd  7/10/07  1:05 PM  Page 1