-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
®
Power for the Digital Revolution
®
.
AVR 745
AUDIO/VIDEO RECEIVER
OWNER’S MANUAL
Related Manuals for Harman Kardon AVR 745
Summary of Contents for Harman Kardon AVR 745
-
Page 1
® Power for the Digital Revolution ® AVR 745 AUDIO/VIDEO RECEIVER OWNER’S MANUAL… -
Page 2: Table Of Contents
Important Notes about the instructions in this manual: • The appearance of the text and cursor in your receiver’s on-screen menus may vary slightly from the illustrations in this manual. Whether the text appears in all uppercase or upper- and lowercase characters, performance and operation remain the same.
-
Page 3: Introduction
Although the power of the AVR 745 makes them easy to use, we strongly recommend that you take a few minutes to read this owner’s manual to familiarize yourself with how the full suite of AVR 745 features and capabilities are config- ured and used in day-to-day operation.
-
Page 4: Important Safety Information
Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. Due to the weight of the AVR 745 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the unit’s feet may leave marks on certain…
-
Page 5: Front-Panel Controls
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. The following controls and indicators are available on the AVR 745’s front panel: 1 Standby/On Switch…
-
Page 6
) Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR 745 is muted, adjusting the volume control will automatically release the unit from the silenced condition. -
Page 7
NOTE: This switch is normally left in the “ON” position. B Headphone Jack: This jack may be used to lis- ten to the AVR 745’s output through a pair of head- phones. Be certain that the headphones have a stan- dard 1/4″… -
Page 8: Rear Panel Connections
Brown Surround Back Right: Subwoofer: Purple Coaxial Digital Audio: Orange Composite Video: Yellow MODEL NO. AVR 745 Video 3 Video Inputs Bridge Digital Media Player (DMP) Input XM-Ready Module Input USB Connector Optical Digital Audio Output Coaxial Digital Audio Output…
-
Page 9
When this connection is used, the AVR 745 will auto- matically send a low-voltage signal to the connected device that turns it on when the AVR 745 is on and off when the AVR 745 is placed in the Standby Mode. -
Page 10
Connect & Play module is connected to this jack, and the XM service activated, you will be able to enjoy the XM Radio through your AVR 745. See page 46 for more information. USB Connector: Connect a cable with a USB “Mini B”… -
Page 11: Tc 30 Remote Control Functions
I Infrared Learning Port NOTES: • The function names shown here are each button’s feature when used with the AVR 745. Most buttons have additional functions when used with other devices. • To make it easier to follow the instructions that refer…
-
Page 12
When using the TC 30 to setup and configure the AVR 745, press the “Menu” button to activate the on-screen menus. B Mute Button: Press this button to activate the MUTE function of the device being controlled. -
Page 13: Zr 10 Remote Control Functions
NOTES: • The ZR 10 remote may be used either in the same room where the AVR 745 is located or in a separate room with an optional infrared sensor or A-BUS prod- uct that is connected to the AVR 745’s Multiroom IR Input Jack g.
-
Page 14
AVR 745’s configuration settings. ç AVR Selector Button: Press this button to turn on the AVR 745. The input in use when the unit was last on will be selected. ∂ Input Selectors: When the AVR 745 is off, press one of these buttons to select a specific input and turn the unit on. -
Page 15: Installation And Connections
TC 30 remote, which is found in the separate box inside the AVR 745 carton. So that the TC 30 is ready when you begin the system configuration process, install the battery, connect the charger and place the remote in the charging cradle, as it takes approximately twelve hours for the battery to fully charge.
-
Page 16: System And Power Connections
Only one connection type is required, although a composite or S-video connection is required if the AVR 745 is to be used in a multiroom video system. 7. The default audio connection for a DVD player is to link the coaxial digital audio output on the DVD…
-
Page 17
51. NOTE: For all options, you may connect an optional IR sensor in the remote room to the AVR 745 via an appropriate cable. Connect the sensor’s cable to the Multiroom IR Input g on the AVR 745 and use the ZR 10 remote to control the room volume. -
Page 18
The AVR 745 is XM Connect & Play-ready, which means that you can easily add the XM service to your home audio system by purchasing… -
Page 19: System Configuration
Speaker 6.1 Placement Diagram NOTE: The 6.1-channel configuration is not recom- mended for the AVR 745. We strongly recommend a 7.1-channel installation as described below. When 6.1-channel materials are played through a 7.1-chan- nel system, the same surround back channel informa- tion is played through both the left and right surround back speakers.
-
Page 20: System Setup
You are now ready to power up the AVR 745 to begin these final adjustments. 1. Make certain that the AC power cord is firmly inserted into the AC Power Cord Jack a and plug the cord into an unswitched AC outlet.
-
Page 21
“burned into” the projection tubes, plasma screen or CRT display. This type of damage is not covered by the AVR 745 warranty and may not be covered by the video display’s warranty. The AVR 745 has two on-screen display modes. -
Page 22: In/Out Setup
This flexibility enables you to customize the way in which you listen to each source and have the AVR 745 memorize those settings. Once these set- tings are made, they will automatically be recalled whenever you select that input.
-
Page 23
The default setting is to have the AVR 745’s Faroudja processing circuitry in use, which will deliver the best image quality when a digital video display is in use. -
Page 24: Video Monitor Settings
Selection of the front-panel jacks as outputs will remain effective as long as the AVR 745 is on. Once the unit is turned off, the jacks will revert to their nor- mal use as inputs when the unit is turned on again.
-
Page 25: Advanced Configuration
SYSTEM CONFIGURATION Once an input is selected, the first configuration choice is to tell the AVR 745 what type of device is being used for that source. To change this setting from the system default, press the Navigation Button ¤…
-
Page 26
AVR 745 itself. You may bypass this setting line unless you wish to view the signals, but remember that they are not designed for any con- sumer use. -
Page 27: Audio Setup
– you may change it later. However, to make it easier to establish the initial parameters for the AVR 745, we suggest Logic 7 (Cinema or Music) for most analog inputs. In the case of inputs such as a CD Player, Tape Deck or Tuner, you may wish to set the mode to Stereo (“Surround…
-
Page 28
PCM sources from DVD or CD players, but also all two-channel analog sources that are in use, as they are converted to PCM within the AVR 745. The modes available include the proprietary Dolby modes (including Dolby Headphone and Dolby Virtual Speaker), DTS processing, our own Logic 7 modes, the conventional “DSP”… -
Page 29: Using Ezset/Eqii
TC 30 or the Set Button œ on the ZR 10 remote to return to the main menu so that you may move to the next step in configuring your AVR 745. Using EzSet/EQII The AVR 745 includes the latest Harman Kardon…
-
Page 30
At this point, a series of test tones will circulate among all the speakers in your system. While this is happen- ing, the AVR 745 is reading the signal to determine which speaker positions are active, what type of speaker is present at each active position and what… -
Page 31
Should this message appear, make note of the sus- pect speaker location, exit the menus and turn the receiver off. Check all speaker wire connections and then rerun EzSet/EQII. SYSTEM CONFIGURATION… -
Page 32
EzSet/EQ II Design process are the measurement for the subwoofers, if present. Although the subwoofers are generally considered one speaker position, since the AVR 745 may be used with two subwoofers, two separate measurement steps must be combined for a complete EQ Design. -
Page 33
However, if you feel that your listening room or system components are best suited to manual entry of these settings, the AVR 745 also allows you to enter or trim any of these traditional system parameters. Even if you do make the settings manually, we recommend that… -
Page 34
SYSTEM CONFIGURATION On the SPEAKER SIZE/X-OVER menu (Figure 27), you have the option to change the type of speaker configured for each of the four speaker posi- tion groups, to change the crossover setting for any one of those speakers, to adjust the setting point for the low-pass filter that determines which frequencies are sent to the subwoofer for low-frequency effects (LFE) signals, to change the subwoofer bass redirec-… -
Page 35
OK/Enter Button E in the TC 30 or the Set Button œ to continue with overall configuration. Subwoofer Configuration The AVR 745 is among the very few A/V receivers or surround processors that are capable of feeding two subwoofers, as well as the standard configuration of a single subwoofer. -
Page 36
SYSTEM CONFIGURATION In addition to providing delaying adjustments for each individual speaker position, the AVR 745 allows you to adjust the delay for the combined output of all speak- ers as a group. This feature is called A/V Sync Delay;… -
Page 37: Manual Setup
Output level adjustment is a key part of the configura- tion of any surround sound product. It is particularly important for a digital receiver such as the AVR 745, as correct outputs ensure that you hear soundtracks with the proper directionality and intensity.
-
Page 38
Once the settings outlined on the previous pages have been made, the AVR 745 is ready for operation. While there are some additional settings to be made, these are best done after you have had an opportunity to lis- ten to a variety of sources and different kinds of pro- gram material. -
Page 39: Operation
Standby/On Switch 1 . • To turn the AVR 745 on or off from the front panel, press the Standby/On Switch 1 . • To turn the AVR 745 on using the TC 30 remote: Press the Screen Button 6 next to one of the Activities shown on the LCD screen.
-
Page 40: Volume And Tone Control
Display Line when the Dolby Headphone mode is in use. Surround Mode Selection One of the most important features of the AVR 745 is its ability to reproduce a full multichannel surround sound field from digital sources, analog matrix surround-encoded programs and standard stereo programs.
-
Page 41: Surround Mode Chart
Logic 7 Cinema Exclusive to Harman Kardon for A/V receivers, Logic 7 is an advanced mode that extracts the maximum surround information from either Logic 7 Music surround-encoded programs or conventional stereo material. When your system has been configured for use with Surround Back speakers (see page 41), you may choose between either 7.1 or 5.1 versions of the Logic 7 modes, while only the 5.1 versions are available when…
-
Page 42: Digital Audio Playback
With the AVR 745 you are able to not only play back the origi- nal compatible digital format, but using the processing power of the Texas Instruments DSP processor, it is possible to decode the basic digital track for 2.0 or…
-
Page 43: Usb Playback
Dolby or DTS surround modes or Logic 7. Since the range of available surround modes is dependent on the type of digital data that is present, the AVR 745 shows you what type of signal is present to help you understand the choice of modes.
-
Page 44
DVD player (usually with the “Audio Select” button or in a menu screen on the disc) to send a full 5.1 feed to the AVR 745. It is also possible for the type of signal feed to change during the course of a DVD’s playback. -
Page 45: Video Adjustments And Operation
• Although the AVR 745 will decode virtually all current DVD movies, CDs and HDTV sources, it is possible that some future digital sources may not be compati- ble with the AVR 745.
-
Page 46: Xm Radio Operation
MANUAL/MONO mode. Preset Tuning Using the remote, up to 30 stations may be stored in the AVR 745’s memory for easy recall, using the front-panel controls or the remote. To enter a station into the memory, first tune the station using the steps outlined above.
-
Page 47: Recording
Direct Button first. • The AVR 745 has five banks of preset memories for XM Radio, each with eight memory positions and designated by a letter (“A” through “E”). To store a…
-
Page 48: Output Level Trim Adjustment
OPERATION long as the AVR 745 is turned on, unless the setting is changed in the OSD menu system, as described above. However, once the AVR 745 is turned off, the setting is canceled. When the unit is turned on again, the front-panel jacks will return to their normal default setting as inputs.
-
Page 49: Advanced Features
Turn-On Volume Level As is the case with most audio/video receivers, when the AVR 745 is turned on, it will always return to the volume setting in effect when the unit was turned off. However, you may prefer to always have the AVR 745 turn on at a specific setting, regardless of what was last in use when the unit was turned off.
-
Page 50: Full-Osd Time-Out Adjustment
Full-OSD Time-Out Adjustment The FULL OSD menu system is used to simplify the setup and adjustment of the AVR 745 by using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disap- pear from the screen (Time-Out).
-
Page 51: Multiroom Operation
The AVR 745 is fully equipped to operate as the con- trol center for a complete multiroom system that is capable of sending one audio/video source to a sec- ond zone in the house while a separate source is lis- tened to in the main room.
-
Page 52: Multiroom Operation
To turn the system off from the remote room, press the Power Off Button å on the ZR 10. Remember that the AVR 745 may be turned on or off from the remote room, regardless of the system’s operation or status in the main room.
-
Page 53
TC 30, press the Devices Button 4 on the TC 30 remote and then press the Screen Button 6 next to AV Receiver. When the choices on the LCD Screen 7 change, press the Page Left/Right Buttons 8 once and then press the Screen Button 6 next to Multi Room. -
Page 54: Troubleshooting Guide
• Additional cooling may not be required In addition to the items shown above, additional information on troubleshooting possible problems with your AVR 745, or installation-related issues, may be found in the list of “Frequently Asked Questions” which is located in the Product Support section of our Web site at www.harmankardon.com.
-
Page 55: Appendix
SYSTEM DEFAULTS The two tables in this section show the factory default settings for the Video Inputs and Video Sources. These tables give you a picture of the AVR 745’s initial settings. You may then decide whether any item needs to be changed so that it is more appropriate for your specific installation. Any of the settings shown may be changed as shown in the pages of the System Configuration section of this manual (pages 21–33).
-
Page 56
APPENDIX Worksheet B: Surround Configuration Defaults and Settings Feature System Default Logic 7 Global Default Surround Dolby Pro Logic II Music Center Width Dolby Pro Logic II Music Dimension Dolby Pro Logic II Panorama Dolby Pro Logic IIx Music Center Width Dolby Pro Logic IIx Music Dimension Dolby Pro Logic IIx Panorama Night Mode… -
Page 57
APPENDIX APPENDIX APPENDIX APPENDIX… -
Page 58: Technical Specifications
Supplied Accessories The AVR 745 is supplied with the following accessory items. Please note that they are packed in different boxes, so it is important to check each individual box before reporting missing items. If any item is missing, please contact Harman Kardon customer service at www.harmankardon.com.
-
Page 59
NOTES NOTES… -
Page 60
250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2006 Harman International Industries, Incorporated. All rights reserved. ® Part No. ZKD2701HA00-R…
-
Руководства по ремонту
1
-
Инструкции по эксплуатации
1
Harman-Kardon AVR 745 инструкция по эксплуатации
(64 страницы)
- Языки:Нидерландский
-
Тип:
PDF -
Размер:
2.72 MB
Просмотр
На NoDevice можно скачать инструкцию по эксплуатации для Harman-Kardon AVR 745. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Harman-Kardon AVR 745. Инструкции по использованию помогут правильно настроить Harman-Kardon AVR 745, исправить ошибки и выявить неполадки.
Посмотреть инструкция для Harman Kardon AVR 745 бесплатно. Руководство относится к категории приемники, 1 человек(а) дали ему среднюю оценку 6.1. Руководство доступно на следующих языках: английский. У вас есть вопрос о Harman Kardon AVR 745 или вам нужна помощь? Задайте свой вопрос здесь
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Harman Kardon AVR 745.
Когда звук считается слишком громким?
Могут ли устройства разных марок подключаться друг к другу при помощи Bluetooth?
Как лучше всего выполнять чистку приемник?
Инструкция Harman Kardon AVR 745 доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
Harman Kardon
AVR 745 Инструкция по эксплуатации
Популярность:
2281 просмотры
Подсчет страниц:
64 страницы
Тип файла:
Размер файла:
2.88 Mb
-
Harman-Kardon AVR 745 — page 1
ENGLISH A VR 7 45 Audio/ V ideo Receiver OWNER’S MANU AL 29510_AVR745_Engelsk 30/10/06 9:31 Side 1 …
-
Harman-Kardon AVR 745 — page 2
2 T ABLE OF CONTENTS 3 Introduction 4 Safety Information 4 Unpacking 5 F ront P anel Controls 7 Rear P anel Connections 10 Main Remote Control Functions 12 Zone II Remote Control Functions 14 Installation and Connections 14 Audio Connections 14 Video Connections 15 HDMI Connections 16 SCAR T A/V Connections 18 System and P ower Connections 20 Speak …
-
Harman-Kardon AVR 745 — page 3
INTRODUCTION 3 ENGLISH Introduction Thank you for choosing Harman Kardon! With the purchase of a Harman Kardon A VR 745 you are about to begin many years of listening enjoyment. T he A VR 745 has the most extensive range of audio and video processing, control and connec- tivity options ever offered by Harman Kardon, enabling it to provide the best …
-
Harman-Kardon AVR 745 — page 4
4 INTRODUCTION / SAFETY INFORMA TION Introduction / Safety Information Important Safety Information READ THIS BEFORE OPERA TING Y OUR UNIT . Do not install this equipment in a confined space such as a case or similar – away from direct sunlight, heat sources , vibration, dust, moisture , and/or cold. Avoid installing this unit where foreign objec …
-
Harman-Kardon AVR 745 — page 5
FRONT P ANEL CONTROLS 5 ENGLISH 1 Main P ower Switch: Press this button to apply power to the A VR. When the switch is pressed in, the unit is placed in a Standby mode , as indicated by the orange LED 3 surrounding the System P ower Control 2 . T his button MUST be pressed in to operate the unit. To turn the unit off completely and prevent the use …
-
Harman-Kardon AVR 745 — page 6
6 FRONT P ANEL CONTROLS Front P anel Controls 9 Surround Mode Selector: Press this button to cycle through the individual surround modes available after the Surr ound Mode Group Selector 5 was pressed (see item 5 above). Note that depending on the type of input, some modes are not always av ailable . (See page 42 for more information about surround …
-
Harman-Kardon AVR 745 — page 7
REAR P ANEL CONNECTIONS 7 ENGLISH Rear P anel Connections MODEL NO. AVR 745 SUB 2 b Z Y X a 0 1 4 3 8 2 F 6 D 7 h d l k I G j c N M E e g K W J L f O C B P Q S T R i H 5 A U V 9 230 V/60Hz 230 V/60Hz ? …
-
Harman-Kardon AVR 745 — page 8
8 REAR P ANEL CONNECTIONS Rear P anel Connections 8-Channel Direct Inputs: T hese jacks are used for connection to source devices such as DVD-Audio or SACD players with discrete analog outputs . Depending on the source device in use , all eight jacks may be used, though in many cases only connections to the front left/right, center , surround l …
-
Harman-Kardon AVR 745 — page 9
REAR P ANEL CONNECTIONS 9 ENGLISH Coaxial Digital Inputs: Connect the coax digital output from a DVD player , HDTV receiver , LD player , MD player or CD player to these jacks . T he signal may be either a Dolby Digital signal, DTS signal, a 2 channel MPEG 1 signal, an HDCD data stream or a standard PCM digital source . Do not connect the RF di …
-
Harman-Kardon AVR 745 — page 10
10 MAIN REMO TE CONTROL FUNCTIONS Main Remote Control Functions 0 USB Connector 1 IR Emitter Window 2 P ower Button 3 Activities Button 4 Devices Button 5 Help Button 6 Screen Buttons 7 LCD Screen 8 P age Left/Right Buttons 9 T r ansport Control Buttons A Device Control Buttons B Mute Button C V olume Controls D Navigation Buttons E OK/Enter Button …
-
Harman-Kardon AVR 745 — page 11
MAIN REMO TE CONTROL FUNCTIONS 11 ENGLISH Main Remote Control Functions 0 USB Connector: Push down on the rubber cover to access the USB connecter . T o program the TC 30 from our Web site , connect the supplied USB cable here , and then to your computer . 1 IR Emitter Window: P oint this end of the remote toward the devices being controlled. 2 P o …
-
Harman-Kardon AVR 745 — page 12
12 ZONE II REMO TE CONTROL FUNCTIONS Zone II Remote Control Functions A P ower Off B A VR Selector C AM/FM T uner Select D Input Selectors E OSD Button F Navigation Controls G Numeric K eys H Disc Skip I V olume Up/Down J Blank Buttons K Mute L Clear Button M Direct Button N Memory Button O T uner Mode Button P T r ansport Controls Q Set Button …
-
Harman-Kardon AVR 745 — page 13
ZONE II REMO TE CONTROL FUNCTIONS 13 ENGLISH Zone II Remote Control Functions G Numeric K eys: These buttons serve as a ten-button numeric k eypad to enter tuner preset positions . T hey are also used to select channel numbers when TV , VCR or Sat receiver has been selected on the remote , or to select track num- bers on a CD , DVD or LD player , d …
-
Harman-Kardon AVR 745 — page 14
14 INST ALLATION AND CONNECTIONS After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to mak e the connections to your audio and video equipment. Before starting to connect your A VR 745 to the source devices , display device , speak ers and other components in your system, you should also unpa …
-
Harman-Kardon AVR 745 — page 15
INST ALLATION AND CONNECTIONS 15 ENGLISH Installation and Connections NO TE: When connecting a device such as a digi- tal cable box or other set-top tuner product with a digital audio output, we recommend that you connect both the digital and analog outputs of the product to your A VR. The audio input polling feature of the A VR will then be able t …
-
Harman-Kardon AVR 745 — page 16
16 INST ALLATION AND CONNECTIONS Installation and Connections • It is not possible to feed an analog composite or S-video signal to a recorder or the A VR’ s multizone system when an HDMI input is in use . If an HDMI-equipped source also has ana- log audio and video outputs , connect them to the Video 2 or Video 3 Video and Audio …
-
Harman-Kardon AVR 745 — page 17
INST ALLATION AND CONNECTIONS 17 ENGLISH Installation and Connections Black Y ellow Red Figure 1: SCART/Cinch-Adapter for playback; signal flow: SCART → Cinch Black Red Blue Y ellow Green White Figure 2: SCART/Cinch-Adapter for record and playback; signal flow: SCART ↔ Cinch Black Y ellow Red Figure 3: Cinch/SCART -Adapter for playback; signal …
-
Harman-Kardon AVR 745 — page 18
18 INST ALLATION AND CONNECTIONS System and P ower Connections T he A VR 745 is designed for flexible use with multiroom systems , external control components and power amplifiers . Main Room Remote Control Extension If the receiver is placed behind a solid or smok ed glass cabinet door , the obstruction may prevent the remote sensor from receiving …
-
Harman-Kardon AVR 745 — page 19
INST ALLATION AND CONNECTIONS 19 ENGLISH Installation and Connections No further installation or adjustment is needed, as the A-BUS connector on the AVR routes the signals in and out of the k eypad to their proper destination for power , signal source and control. T he output fed to the A-BUS jack is determined by the A VR’ s multiroom system, an …
-
Harman-Kardon AVR 745 — page 20
20 INST ALLATION AND CONNECTIONS Installation and Connections Speaker Selection No matter which type or brand of speak ers is used, the same model or brand of speak er should be used for the front-left, center and front-right speak ers. T his creates a seamless front sound- stage and eliminates the possibility of distracting sonic disturbances that …
-
Harman-Kardon AVR 745 — page 21
INST ALLATION AND CONNECTIONS 21 ENGLISH Notes on speaker placement: 1. The limitations of your listening room, includ- ing the placement of walls and furniture , may mak e it difficult to follow the speaker placement suggestions shown above . Depending on the specific layout of the room, here are some ways to compensate for unusual conditions: • …
-
Harman-Kardon AVR 745 — page 22
22 SY STEM CONFIGURATION System Configuration Once the speak ers have been placed in the room and connected, the remaining steps are to program the system configur ation memories . Although it is necessary to assign input/output settings and surround mode choices manually , we recommend that you tak e advantage of the power and precision of EzSet/E …
-
Harman-Kardon AVR 745 — page 23
SY STEM CONFIGURATION 23 ENGLISH • More adjustment options may be accessed by pressing the P age Left/Right Buttons 8 . When the full-OSD system is in use , the menu selections are not shown in the Upper or Lower Display Lines ˜ and OSD O N will appear in the Upper Display Line ˜ to remind you that a video display must be used. When the semi- O …
-
Harman-Kardon AVR 745 — page 24
24 SY STEM CONFIGURATION System Configuration • When the new list of options appears , press the Screen Button 6 to the right of DIGITAL INPUT . T he current digital input name will begin to flash in the Upper Display Line ˜ . • Press the ‹ / › Navigation Button D F until the desired input name appears on the right side of the Upper Displa …
-
Harman-Kardon AVR 745 — page 25
SY STEM CONFIGURATION 25 ENGLISH System Configuration In addition to the changes to the video process- ing configuration that are made through the IN/OUT SETUP menu, you may change the setting for an input at any time by pressing the ‹ / › Buttons 7$ on the front panel to cycle through the available choices . When any needed change to the video …
-
Harman-Kardon AVR 745 — page 26
26 SY STEM CONFIGURATION System Configuration Video Monitor Settings T he VIDEO MONITOR SETTINGS menu (Figure 4) is unique in that it contains a mix of information display lines that detail status information about the A VR 745’ s video system settings , along with a few lines where a specific parameter may be changed. With the MASTER MENU on the …
-
Harman-Kardon AVR 745 — page 27
SY STEM CONFIGURATION 27 ENGLISH System Configuration Once the main VIDEO MAIN menu is dis- played with the on-screen ➔ cursor pointing to SOURCE press the ‹ / › Navigation Buttons D F until the name of the input you wish to change the settings for is shown. At the same time , any video input name that you had previ- ously programmed to indiv …
-
Harman-Kardon AVR 745 — page 28
28 SY STEM CONFIGURATION Once the settings have been made on the main video setup screen, you may either return to the main setup menu or proceed to the two Advanced Configur ation setting menus . T he options on those pages are set by your choice on the SOURCE TYPE line as shown above , but you may wish to change one or more of the set- tings to c …
-
Harman-Kardon AVR 745 — page 29
SY STEM CONFIGURATION 29 ENGLISH System Configuration T he O U T ASPECT RATIO line sets the aspect ratio for the input source currently being adjusted. To mak e a change from the default setting, press the ‹ / › Navigation Buttons D F . Remember that this setting impacts the actual playback only . T he on-screen menus will always be output as a …
-
Harman-Kardon AVR 745 — page 30
30 SY STEM CONFIGURATION System Configuration When both a surround mode group and a specific surround mode have been selected, press the ⁄ / ¤ Navigation Button D F to move to the next configuration line . T he DEFAULT SURR mode line is where you choose the mode that is activated when a digital source is selected. The factory default setting of …
-
Harman-Kardon AVR 745 — page 31
SY STEM CONFIGURATION 31 ENGLISH System Configuration When the ➞ cursor is pointing to the MODE line , press the ‹ / › Navigation Buttons D F to select the desired Dolby surround mode , again remembering that the choice of available modes will v ary with the type of pro- gram material being played and the number of speak ers in your system co …
-
Harman-Kardon AVR 745 — page 32
32 SY STEM CONFIGURATION System Configuration In addition to making system setup quick and easy , EzSet/EQ II is more precise than manual set- tings . With EzSet/EQ II you are able to calibrate your system in a fraction of the time it would tak e to enter the settings manually, and with results that rival those achieved with expensive test equipmen …
-
Harman-Kardon AVR 745 — page 33
INTRODUCTION 33 ENGLISH System Configuration During each EQ Design step , you have the option to perform the tests for that specific portion of the process , or you may skip the settings and move to another step or return to the EZSET/EQ MAIN menu (Figure 12). When the complete EQ Design process is complete , you will be given an opportunity to “ …
-
Harman-Kardon AVR 745 — page 34
34 SY STEM CONFIGURATION System Configuration Step 2. When the Far Field measurements are completed, the system will ask you to tak e three Near Field measurements , one at each front speak er position. T hese measurements enable EzSet/EQ to produce the most accurate settings for both high and low frequency equalization. T he Near Field measurement …
-
Harman-Kardon AVR 745 — page 35
SY STEM CONFIGURATION 35 ENGLISH System Configuration • If the tests were successful, the message will show the number of subwoofers , as shown in Figure 21. Y ou may either press the OK/Enter Button E on the TC 30 or the Set Button Q on the ZR 10 remote to continue to the next step and conclude the EzSet Design process , or press the ⁄ / ¤ Na …
-
Harman-Kardon AVR 745 — page 36
36 SY STEM CONFIGURATION System Configuration Manual Setup In most cases it is simpler , easier and more accu- rate to let EzSet/EQ tak e care of entering the sys- tem parameters for speak er “size”, speak er crossover , channel output and individual channel delay time . However , if you feel that your listen- ing room or system components are …
-
Harman-Kardon AVR 745 — page 37
SY STEM CONFIGURATION 37 ENGLISH System Configuration Figure 27 T o change the setting for any of the four speaker positions , press the ⁄ / ¤ Navigation Button D F until the cursor points to the line where you wish to mak e the change. Press the ‹ / › Navigation Button D F to change the set- ting, but note that when you do this for the firs …
-
Harman-Kardon AVR 745 — page 38
38 SY STEM CONFIGURATION System Configuration • T o have low-frequency information sent to the subwoofer only when Large speak ers are selected, choose SU B (L/R) . T his option is only available when the unit is set to SUR — ROUND OF F so that a pure analog audio path is provided. • When no subwoofer is present and Large speak ers are configur …
-
Harman-Kardon AVR 745 — page 39
SY STEM CONFIGURATION 39 ENGLISH System Configuration T he Delay setting for all speakers configured for your system will be available only (with 5.1 or with 6.1/7.1 configuration) when any Dolby sur- round mode is selected (except Dolby-3-Stereo). In addition they are selectable with these modes only , with all other modes the delay times are fixe …
-
Harman-Kardon AVR 745 — page 40
40 SY STEM CONFIGURATION System Configuration In most cases , you will not need to mak e any adjustments to the output level, as the settings made by running EzSet/EQ are as accurate as those made manually . However , you are able to use the CHANNEL ADJUST menu to trim the settings to suit your personal preferences or to configure the system so tha …
-
Harman-Kardon AVR 745 — page 41
SY STEM CONFIGURATION 41 ENGLISH As soon as the button is pressed, the test tone will begin to circulate , as indicated earlier . T he correct channel from which the test noise should be heard will be shown in the lower third of the video screen and in the Lower Display Line ˜ While the test noise is circulating, the proper channel position will a …
-
Harman-Kardon AVR 745 — page 42
42 OPERA TION Operation Surround Mode Chart MODE FEA TURES DOLBY DIGIT AL Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated Low F requency Effects channel. DOLBY DIGIT AL EX Available when the receiver is configured for 6.1/7.1 channel operation, Do …
-
Harman-Kardon AVR 745 — page 43
OPERA TION 43 ENGLISH Surround Mode Chart MODE FEA TURES DTS Neo:6 Cinema T hese two modes are available when any analog source is playing to create a six-channel DTS Neo:6 Music surround presentation from conventional Matrix-encoded and traditional Stereo sources . Select the Cinema version of Neo:6 when a program with any type of analog Matrix su …
-
Harman-Kardon AVR 745 — page 44
44 OPERA TION Operation Basic Operation Once you have completed the setup and configu- ration of the A VR, it is simple to oper ate and enjoy . The following instructions should be fol- lowed for you to maximize your enjoyment of your new receiver: Before using the A VR 745, we strongly recom- mend that you program the TC 30 remote , following the …
-
Harman-Kardon AVR 745 — page 45
OPERA TION 45 ENGLISH • T o select an input using the ZR 10 remote , press one of the Input Selectors D , or the source-specific buttons for T uner C or The Bridge . • As the input is changed, the A VR will automati- cally switch to the digital input (if selected), sur- round mode component video input, A/V Sync Delay and Night Mode configu …
-
Harman-Kardon AVR 745 — page 46
46 OPERA TION Operation • When the headphones are in use, you may tak e advantage of the Dolby Headphone modes to bring added spaciousness to headphone listen- ing. Press the Surround Mode Group Selector 5 to cycle through the three Dolby Headphone modes to select the one that you prefer . Surround Mode Selection One of the most important feature …
-
Harman-Kardon AVR 745 — page 47
OPERA TION 47 ENGLISH Dolby Digital Dolby Digital is a standard part of DVD , and is available on specially encoded LD discs and satellite broadcasts and it is a part of the new high-definition television (HDTV) system. Note that an optional, external RF demodulator is required to use the A VR to listen to the Dolby Digital sound tracks av ailable …
-
Harman-Kardon AVR 745 — page 48
48 OPERA TION Operation If you wish to disable the auto-polling feature , you may do so by following the instructions shown for the IN/OU T SETUP menu (Figure 2), as shown on page 23. When the digital source is playing, the A VR will automatically detect whether it is a multichannel Dolby Digital or DTS source or a HDCD , MP3 or conventional PCM si …
-
Harman-Kardon AVR 745 — page 49
OPERA TION 49 ENGLISH • T wo options are available for selecting an input source using the TC 30 remote. ■ Press the Activities Button 3 to display the list of preprogrammed activities and then press the Screen Button 6 to the left of LISTE N TO US B . This will both select the USB input and change the remote codes so that the buttons will cont …
-
Harman-Kardon AVR 745 — page 50
50 OPERA TION Operation • Note that not all digitally encoded programs and not all audio tracks on a DVD contain full 5.1 or 6.1 channel audio . Consult the program guide that accompanies the DVD or laser disc to determine which type of audio has been record- ed on the disc. The A VR will automatically sense the type of digital surround encoding …
-
Harman-Kardon AVR 745 — page 51
OPERA TION 51 ENGLISH Operation T ape Recording In normal operation, the audio or video source selected for listening through the A VR is sent to the record outputs . T his means that any program you are watching or listening to may be recorded simply by placing machines connected to the out- puts for T ape Outputs or Video 1 Outputs in …
-
Harman-Kardon AVR 745 — page 52
52 OPERA TION Operation T o access the settings for selecting an EQ Design preset, press the Devices Button 4 on the TC 30 followed by the Screen Button 6 at the top of the row of buttons on the left side of the TC 30, to the left of A V RECEIVER on the LCD screen. After the list of options displayed in the LCD Screen 7 changes , press the P age Le …
-
Harman-Kardon AVR 745 — page 53
ADV ANCED FEATURES 53 ENGLISH T he A VR is equipped with a number of advanced features that add extra flexibility to the unit’ s operation. While it is not necessary to use these features to operate the unit, they provide addi- tional options that you may wish to use . T o change a setting from its factory default, you will use the ADVANCED SELEC …
-
Harman-Kardon AVR 745 — page 54
54 ADV ANCED FEATURES Advanced Featur es Semi-OSD Settings T he semi-OSD system places one line messages at the lower third of the video display screen whenever the V olume , Input Source , Surround mode or tuner frequency of any of the configura- tion settings are changed. The semi-OSD system is helpful in that enables you to have feedback on any …
-
Harman-Kardon AVR 745 — page 55
MUL TIROOM OPERA TION 55 ENGLISH Multiroom Oper ation Multiroom Operation T he A VR is fully equipped to operate as the con- trol center for a complete multiroom system that is capable of sending one audio/video source to a second zone in the house while separate source is listened to in the main room. In addi- tion to providing for control over th …
-
Harman-Kardon AVR 745 — page 56
56 MUL TIROOM OPERA TION Multiroom Oper ation Remember that once this setting is made you will not be able to tak e advantage of any of the 6.1/7.1- channel decoding or processing modes , and no Surround Back speak ers must be selected in the speak er setup procedure outlined earlier . In addition the speak ers used for the remote zone must be conn …
-
Harman-Kardon AVR 745 — page 57
TUNER OPERA TION 57 ENGLISH T uner Oper ation T o change the remote room’ s volume , when MULTI LEVEL appears , press the OK/Enter Button E on the TC 30 or the Set Button Q on the ZR 10, and press the ⁄ / ¤ Naviga- tion Button D F to change the volume set- ting. Note that this volume adjustment controls the level for the output to the Multiroo …
-
Harman-Kardon AVR 745 — page 58
58 TUNER OPERA TION T uner Oper ation RDS Operation T he A VR is equipped with RDS (Radio Data System), which brings a wide range of informa- tion to FM radio . Now in use in many countries , RDS is a system for transmitting station call signs or network information, a description of station program type , text messages about the station or specifi …
-
Harman-Kardon AVR 745 — page 59
TROUBLESHOO TING GUIDE 59 ENGLISH T r oubleshooting Guide Processor Reset In the rare case where the unit’ s operation or the displays seem abnormal, the cause may involve the erratic oper ation of the system’ s memory or microprocessor . T o correct this problem, first unplug the unit from the AC wall outlet and w ait at least three minutes . …
-
Harman-Kardon AVR 745 — page 60
60 APPENDIX APPENDIX System Defaults T he two tables in this section show the factory default settings for the Video Inputs , Video Sources and Video Display Aspect Rat ios . T hese tables give you the complete picture on the A VR 745’ s initial settings . Y ou may then decide whether any item needs to be changed so that it is more appropriate fo …
-
Harman-Kardon AVR 745 — page 61
APPENDIX 61 ENGLISH APPENDIX W orksheet B: Surround Configur ation Defaults and Settings Feature System Default Y our System Settings Logic 7 Global On Default Surround Original Dolby Pro Logic II Music Center Width 3 Dolby Pro Logic II Music Dimension 0 Dolby Pro Logic II Panorama Off Dolby Pro Logic IIx Music Center Width 3 Dolby Pro Logic IIx Mu …
-
Harman-Kardon AVR 745 — page 62
62 APPENDIX APPENDIX FEA TURE DVD Video 1 Video 2 Video 3 Video 4 HDMI 1 HDMI 2 CD T a pe T uner The Bridge USB 6/8 Ch Direct Input Title Surround Mode Audio In Port Audio Auto Poll Video In Port Component Video Input Video Processing A/V Sync Delay T rigger 2 Record Output Auto Poll Input Source T ype Display T ype Video Input Port Enhance Level I …
-
Harman-Kardon AVR 745 — page 63
TECHNICAL SPECIFICA TIONS 63 ENGLISH T echnical Specifications Audio Section Stereo Mode Continuous Average P ower (FTC) 100 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms 5/7 Channel Surround Modes P ower Per Individual Channel F ront L&R channels: 85 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 …
-
Harman-Kardon AVR 745 — page 64
250 Crossways P ark Drive, Woodbury , New Y ork 11797 www .harmankardon.com Harman Consumer Group , Inc.: 2, route de Tours , 72500 Château-du-Loir , Fr ance © 2006 Harman Kardon, Incorporated P art No.: ZKD2801HA00-R 29510_AVR745_Engelsk 30/10/06 9:32 Side 64 …
249 ₽
Инструкция (руководство пользователя) на Аудио/видео ресивер Harman Kardon AVR-745
Артикул: harman-kardon-avr-745
Категория: Harman Kardon
-
Описание
-
Детали
Описание
Инструкцию по эксплуатации Harman Kardon AVR-745 на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.
Детали
| Формат файла |
|
|---|---|
| Размер инструкции в кб |
1488 |
Скачать
ENGLISH
AVR 745 Audio/Video Receiver
OWNER’S MANUAL
29510_AVR745_Engelsk 30/10/06 9:31 Side 1