Хускварна тф 338 руководство по

Left Blade

Recommend to USE Octane Value over 90

2• 3

90

3,6 L / 3,6

Symbols

These symbols are on the machine and in the instructions.

WARNING! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Use hearing protection to minimise the risk of hearing impairment.

This product is in accordance with applicable

EC directives.

Reverse

Neutral

Fast forward

Slow forward

Fast

Slow

Warning: rotating parts. Keep hands and feet clear.

The ignition lead should always be removed from the spark plug before repair, cleaning or maintenance work.

Keep your distance!

Explanation of warning levels

The warnings are graded in three levels.

WARNING!

IMPORTANT!

IMPORTANT! Used if there is a risk of injury to the operator or damage to the surroundings if the instructions in the manual are not followed.

CAUTION!

CAUTION! Used if there is a risk of damage to materials or the machine if the instructions in the manual are not followed.

General

•These instructions are for your safety. Read them carefully.

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

•If you have any problems or questions about the tiller, please contact your Husqvarna dealer for more information.

WARNING! Only use the machine for the

!purpose it is designed for, tilling the ground. Any other use may be dangerous or cause damage to the machine.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•The operator is responsible for any unsafe situations or risks that people and property are exposed to.

•Never start to work with the machine before the working area is clear and you have a firm foothold. Look out for any obstacles with unexpected movement. Take great care when working on sloping ground.

•Only allow the machine to be used by adults who are familiar with its use.

•Never allow children or other persons not trained in the use of the machine to use or service it. Local laws may regulate the age of the user.

•Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 20 m. Stop the machine immediately if anyone approaches.

•Never use the machine if you are tired, if you have consumed alcohol, if you are taking other drugs or medication that can affect your vision, judgement or coordination.

•Pay particular attention on hard ground.

WARNING! This machine produces an

!electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

•Never use the machine when barefoot. Always wear protective shoes or protective boots, preferably with steel toes. Never wear loose-fitting clothing, jewellery or similar that can get caught in moving parts. Use hearing protection to minimise the risk of hearing impairment.

Preparation

•Inspect the working area. Remove all loose objects, such as stones, broken glass, nails, steel wire, string, etc. that could be projected by the machine.

•Check the entire machine before starting. Replace worn or damaged parts. Check that there are no fuel leaks and that all guards and covers are complete and fastened securely. Check all nuts and screws.

•Check that the electrical wires are intact and in good condition.

Use

•Never use the machine itself to transport people.

•Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements of the intended use.

•Stop the engine when the machine is not in use.

•Walk with the machine, do not run.

•Pay close attention when pulling the machine towards you or reversing the direction of rotation.

•Keep a safe distance from the rotating blades, set by the length of the steering column. Keep your hands and feet away from the rotating blades.

•The engine and the exhaust system become very hot during operation. Risk of burn injuries if touched.

•Only use the machine in daylight or in other well-lit conditions.

•Do not use the machine on ground that slopes more than 20°.

•Work across slopes, not up or down.

The warranty is not valid if non genuine parts are used.

Stop the engine immediately if the following occurs:

•Excessive vibration and / or noise.

•Mechanical jam preventing motor from turning.

•Difficulties to engage or disengage the clutch.

•A collision with a foreign object.

•Deterioration of the engine stop cable.

If the engine halt cable is severed, use the starter control to stop the engine. For more information see section ”Start the engine”

Allow the machine to cool down. Disconnect the HT lead from the spark plug. Check that the machine is not damaged. If the machine is damaged, hand it in to an authorized service workshop for repair.

Maintenance

•Always stop the engine before repair, cleaning, maintenance work or when changing the tools on the machine.

•Regular maintenance is essential for safety and to maintain the levels of performance.

•Wear heavy-duty gloves when changing the tools on the machine.

•Replace the rotating blade in complete sets to keep them balanced. Always use genuine parts.

•Check that nuts and screws are tight.

•Never use a machine that has a faulty muffler. Contact an authorised service workshop.

IMPORTANT! For your own safety, do not alter the characteristics of the machine. Do not change the engine speed settings and do not run the engine at excess speed.

Transport and storage

•Allow the machine to cool before putting it in storage.

•Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage.

•The machine should always be stored in a dry place away from open fire, sparks or intense heat.

•Fuel and fuel vapour are highly flammable. Take care when handling fuel and oil. Bear in mind the risk of fire, explosion and inhaling fumes.

•When storing and transporting fuel always use approved containers intended for this purpose.

•Do not try to lift the machine. Use a method of handling adapted to the weight of the machine and to the situation.

•Take extra care when loading it onto or off a vehicle or trailer. Use a suitable ramp.

•Use an approved trailer to transport the machine. Secure the machine with approved tightening straps. Ensure that no part of the machine are squashed or damaged by the tightening straps. It is a good idea to cover the machine.

•For more information about moving of the machine during work, see section «Moving».

Fueling

•Always stop the engine and let it cool for a few minutes before refuelling.

•Refuel in a well ventilated area with the engine turned off.

Clean the area around the fuel cap. Tighten the fuel cap carefully after refuelling. If the cap is not properly tightened the cap might vibrate lose and fuel may escape from the fuel tank creating a fire hazard. Move the machine at least 3 m from the refuelling point before starting it.

•Bear in mind the risk of fire, explosion and inhaling fumes. Do not fill so that the fuel runs over. Wipe up all spillage on the ground and machine. If you spill fuel on yourself or your clothes. Change your clothes. Move the machine at least 3 metres away from the refuelling area before starting.

•The engine emits carbon monoxide, which is a colourless, poisonous gas. Do not use the machine in enclosed spaces.

Unpacking

Illustration: 1 • 1

IMPORTANT! Make sure to not cut the cables/wires or scratch the machine when cutting the edges of the case.

Assembly

Illustration: 1 • 2

WARNING! Inappropriate assembly of this

!rotary tiller could cause severe injuries. Ensure that you follow all the instructions carefully.

•Fitting the tine blades. Illustrations only shows assembly of the tine blades on the right side. Make sure that the sharp edges face one side on both right and left side tines.

(Figure 1 — 6)

•Fitting the support wheel. (Figure 7)

•Fitting the connecting joint. (Figure

•Fitting the drag bar. (Figure 9)

•Fitting the handle bar. (Figure 10)

•Adjust the hight of the handle and tighten the knobs securely. (Figure 11)

•Fitting the clutch control. (Figure 12)

—Turn to proper side and fasten the bolt.

•Fitting the lower tidy cover. (Figure 13 — 14)

—Tidy the cables.

—Fit the rubber holder properly.

—Fit the cover and tighten the screws.

•Fitting the tine cover. (Figure 15 — 17)

—Do not tighten the bolt immediately after installed.

—Install all 4 bolts and nuts first, then tighten one by one.

•Fitting the shifting lever. (Figure 18)

Any dismantling operation must only be performed by an authorized service workshop.

CAUTION! After assembling the machine completly, tighten the bolts and screws with modertion. Do not overtighten.

Description of the components

Illustration: 1 • 3

1Engine

2Tine cover

3Support wheel

4Belt cover

5Blade round

6Drag bar

7Handle

8Lever shifting

9Bumper

10Clutch control

11ON/OFF switch

12Throttle control

13Upper tidy cover

14Lower tidy cover

Type plate

Illustration: 1 • 4

Transport wheel

Illustration: 1 • 5

A= Working position

B= Transport position

Before starting

•Check the engine oil level and top up if necessary. Illustration: 2 • 1

•Check the oil level of the gear box, and top up if necessary. Illustration: 2 • 2

•Check the fuel level. Fill if necessary. Illustration: 2 • 3

—Recommended to use: Octane Value over 90.

Start the machine.

•Open the fuel tap. Illustration: 2 • 4

•Set the choke control in the A position. Illustration: 2 • 5

•Shifting lever Illustration: 2 • 6

—Put the gear shift lever in the ”N” position (neutral).

•Throttle control Illustration: 2 • 7

—Push the throttle control to full throttle position.

•Set the on/off switch to ON to attain start throttle setting. Illustration: 2 • 8

•Pull the recoil start handle Illustration: 2 • 9

WARNING! When the machine starts, remain

!within the safety zone.

•Set the choke control in the B position. Illustration: 2 • 10

Use

Illustration: 3 • 1

WARNING! Keep unauthorised persons at a

!distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 20 m. Stop the machine immediately if anyone approaches.

Forwards

• Use the shifting lever to control the drive speed.

Slow

Fast

•Press down the trigger lock on the handle (A) and push the clutch lever in towards the handle (B).

•The cultivator starts to rotate when you push the clutch lever down towards the handle and stops rotating when you release the clutch lever.

Reverse

Illustration: 3 • 2

IMPORTANT! The cultivator starts to rotate when you push the clutch lever down towards the handle and stops rotating when you release the clutch lever. It is important to release the clutch lever before using reverse.

•Slide the control to ”R” position.

•Press down the trigger lock on the handle (A) and push the clutch lever in towards the handle (B).

Stopping

•Release the clutch lever. Illustration: 4 • 1

•Put the gear shift lever in the ”N” position (neutral). Illustration: 4 • 2

•Move the throttle control to the MIN. position. Illustration: 4 • 3

•Use the stop switch to switch off the engine. Illustration: 4 • 4

•Close the fuel tap. Illustration: 4 • 5

Moving the machine

Illustration: 5 • 1

Support wheel

•The engine must be switched off before moving. See instructions under section Stopping.

•Set the wheel in movement position. (Figure A)

•Set the handlebars in the low position to facilitate moving the machine. (Figure B)

•Lift the blades from the ground using the handlebars and then advance forwards. (Figure C)

Moving the machine

Illustration: 5 • 2

Wheel kit

•The engine must be switched off before moving. See instructions under section Stopping.

•Change the blades to wheels when transporting. (Figure A)

•Lift the drag bar from the ground using the handlebar and then advance forwards. (Figure B)