Игровая приставка sony playstation 3 инструкция по применению

Оглавление

Топ 10 инструкций

Другие инструкции

Безопасность и поддержка Before using this product, careful…

Безопасность и поддержка, Safety and support

• Изображение
• Текст

GB

RU

2-894-644-72(1)

Безопасность и поддержка

Before using this product, carefully read the product documentation and retain it for future reference.
Перед использованием продукта внимательно прочтите документацию и сохраните ее для дальнейшего использования.

Safety and Support

2

WARNING

To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.

Caution
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
The use of optical instruments with this product will increase
eye hazard.

This appliance is classified as a CLASS 1 LASER product under
IEC60825-1+A2:2001.

If you have an epileptic condition or have had seizures, consult your doctor prior to
playing. Some individuals may experience eye soreness, altered vision, migraine,
muscle twitching, convulsion, blackout, loss of awareness or disorientation when
exposed to flashing or flickering lights or other light stimulation on a television
screen or while playing video games. If you experience any of the above symptoms
while playing, discontinue use immediately and consult your doctor.

Stop playing immediately when you experience the following
symptoms

In addition to the above symptoms, whilst playing if you have a headache, dizziness,
nausea, fatigue, similar symptoms to motion sickness, or if you feel a discomfort or
pain in any body part such as eyes, ears, hands, arms, feet, discontinue use
immediately. If the condition persists, seek medical attention.

Radio waves may affect electronic equipment or medical devices (for example,
pacemakers), which may cause malfunctions and possible injuries.
• If you use a pacemaker or other medical device, consult your physician or the

manufacturer of your medical device before using the wireless LAN feature.

• Do not use the wireless LAN feature in the following locations:

– Areas where wireless LAN use is prohibited, such as in hospitals. Abide by

medical institution regulations when using the system on their premises.

– Areas near fire alarms, automatic doors and other types of automated equipment.

WARNING

CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT

Seizures induced by light stimulation (Photosensitive
Epilepsy)

Radio waves

3

WARNING

Some PlayStation

®

2 or PlayStation

®

format software titles may perform differently

on this system than they do on PlayStation

®

2 or PlayStation

®

systems, or may not

perform properly on this system. For more information, visit our Web site at
www.playstation.com.

Sony Computer Entertainment Inc. uses DNAS (Dynamic Network Authentication
System), a proprietary authentication system, to help protect copyright and security
in connecting the PS3™ system to a network. DNAS may retrieve information about
a user’s hardware and software for authentication, copy protection, account blocking,
system, rules, or game management and other purposes. The information collected
does not identify the user personally. The unauthorised transfer, exhibition, export,
import or transmission of programs and devices circumventing its authentication
scheme may be prohibited by law.

The System Software included within this product is subject to a limited licence from
Sony Computer Entertainment Inc. Refer to http://www.scei.co.jp/ps3-eula for
further details.

PlayStation

®

and PlayStation

®

2 format software

About DNAS

System software

5

Precautions

Be
fo

re
us

e

GB

This product has been designed with the highest concern for safety. However, any
electrical device, if used improperly, has the potential for causing fire, electrical
shock or personal injury. To help ensure accident-free operation, follow these
guidelines:
• Observe all warnings, precautions and instructions.
• Regularly inspect the AC power cord for damage and for dust build-up around the

power plug or electrical outlet.

• Stop use, unplug the AC power cord from the electrical outlet and disconnect any

other cables immediately if the device functions in an abnormal manner, produces
unusual sounds or smells or becomes too hot to touch.

• Contact the appropriate PlayStation

®

customer service helpline which can be

found within every PlayStation

®

, PlayStation

®

2, and PLAYSTATION

®

3

software manual.

• Use in a well-lit area and keep a safe distance from the TV screen.
• Avoid prolonged use of the PS3™ system and Wireless Controller.
• Stop using the system immediately if you begin to feel tired or if you experience

discomfort or pain in your hands or arms while operating the Wireless Controller.
If the condition persists, consult a doctor.

• If you experience any of the following health problems, discontinue use of the

system immediately. If symptoms persist, consult a doctor.
– Dizziness, nausea, fatigue or symptoms similar to motion sickness
– Discomfort or pain in a part of the body, such as eyes, ears, hands or arms

• Keep the system and accessories, including cable ties and fasteners, out of the

reach of small children.

• Do not connect cables other than a USB cable while the AC power cord is plugged

into the electrical outlet.

• Do not touch the system or connected cables or accessories during an electrical

storm.

• Do not use the system or accessories near water.
• Do not allow liquid, small particles or other foreign objects to get into the system

or accessories.

• Do not touch the connectors of the system or accessories.
• Do not expose the system or accessories to dust, smoke or steam. Also, do not place

the system in an area subject to excessive dust or cigarette smoke. Dust build-up or
cigarette smoke residue on the internal components (such as the lens) may cause
the system to malfunction.

• Do not expose the system or accessories to high temperatures, high humidity or

direct sunlight.

• Do not place the system or accessories on surfaces that are unstable, tilted or

subject to vibration.

• Do not set the system other than in the vertical or horizontal position. Also, do not

change the position while the system is turned on.

• Be careful when carrying the system. If you do not have a good grip or attempt to

carry by holding the slot cover* on the system front, the system may drop causing
potential damage or injury.

* Models equipped with media slots only

• Do not move or change the position of the system with a disc inserted. The

vibration may result in scratching of the disc or the system.

• Do not turn off the system while data is being saved on or loaded from the hard

disk.

• Do not stand on or put objects on the system, and do not stack the system with other

devices.

• Be careful not to pinch your fingers in the slot cover. (Models equipped with media

slots only)

• Do not place the system and connected accessories on the floor or in a place where

they may cause someone to trip or stumble.

• Do not allow bodily contact with the system or air from the system vents for an

extended period of time while in use. Extended contact under these conditions may
cause low-temperature burns.

Before use

Precautions

Safety

Use and handling

When connecting the system to a plasma or projection…

Страница 6

• Изображение
• Текст

6

Precautions

• When connecting the system to a plasma or projection* TV, do not leave a still

image on the TV screen for an extended period of time, as this may leave a faint
image permanently on the screen.

* Except LCD screen types

• Parents are encouraged to monitor children in online activities to ensure safe and

responsible Internet usage.

• Take care when using the Wireless Controller’s motion sensor function.

– Before using the motion sensor function, make sure you have enough space to

move around.

– Firmly grip the Wireless Controller to prevent it from slipping out of your grasp

and causing damage or injury.

– When using the Wireless Controller with a USB cable, ensure that the cable

cannot hit a person or any object, and do not pull the cable out of the PS3™
system whilst playing.

Do not block any vents. To maintain good ventilation, follow the guidelines below:
• Place the system at least 10 cm away from a wall surface.
• Do not place on a carpet or rug with long fibres.
• Do not place in a narrow or cramped space.
• Do not cover with cloth.
• Do not allow dust to build up on the vents.

• To help ensure safe operation, regularly inspect the AC power cord. If damaged,

stop use immediately and contact the appropriate PlayStation

®

customer service

helpline which can be found within every PlayStation

®

, PlayStation

®

2, and

PLAYSTATION

®

3 software manual.

• Do not use a power cord other than the supplied AC power cord. Do not modify

the cord.

• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched particularly at plugs,

expansion receptacles and the point where the cord exits from the system.

• Do not place heavy items on the cord.

• Do not place the AC power cord near heating equipment and do not expose the cord

to heat.

• Do not allow dust or foreign matter to build up around the AC IN connector. Before

connecting or plugging in the AC power cord, check that there is no dust or foreign
matter in or on the power plug or connecting end of the cord, the electrical outlet
or the AC IN connector on the system rear. If the plug or connector becomes dirty,
wipe off with a dry cloth before connecting.

• Unplug the AC power cord from the electrical outlet before cleaning or moving the

system, or when you do not intend to use the system for an extended period of time.
When disconnecting, grasp the power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an angle.

• Do not connect the AC power cord to a voltage transformer or inverter. Connecting

the AC power cord to a voltage transformer for overseas travel or an inverter for
use in an automobile may cause heat to build up in the system and may cause burns
or a malfunction.

Use the PS3™ system and accessories according to the instructions in the product
documentation. No authorisation for the analysis or modification of the system or
accessories, or the analysis and use of its circuit configurations, is provided.
Unauthorised modification of the system or accessories will void your warranty.
There are no user serviceable components inside the PS3™ system (the supplied
hard disk may be removed but not disassembled or modified). Additionally, there is
a risk of exposure to laser radiation as well as to electrical shock.

• A broadband Internet connection is required to connect to a network.
• User is responsible for Internet service fees. For details, refer to the information

provided in your service contract or contact your Internet service provider.

Vents

AC power cord use

Never disassemble or modify the system or accessories

Network

7

Precautions

Be
fo

re
us

e

GB

• Use only an Ethernet cable compatible with 10BASE-T, 100BASE-TX or

1000BASE-T networks. Do not use a cord for a standard residential telephone line
or cables of types other than those mentioned here. Using the wrong type of cord
or cable can cause more electrical current than necessary to flow through the LAN
connector, which may lead to heat build-up, fire or malfunction.

• The 2.4 GHz range of radio waves used by the wireless networking feature of this

product is a range shared by various devices. This product has been designed to
minimise the effect of other devices using the same range. However, in some cases
interference from other devices may reduce the connection speed, shorten the
signal range or cause the connection to be terminated unexpectedly.

• When using the PS3™ system’s scan function to select a wireless LAN access

point, access points that are not intended for public use may be displayed. Only
connect to an access point that you are authorised to use, or one that is available
through a public wireless LAN or hotspot service. (Models equipped with the
WLAN feature only)

If the system or disc is brought directly from a cold location to a warm one, moisture
may condense on the lens inside the system or on the disc. Should this occur, the
system may not operate properly. In this case, remove the disc and turn off and
unplug the system. Do not put the disc back in until the moisture evaporates (this may
take several hours). If the system still does not operate properly, contact the
appropriate PlayStation

®

customer service helpline which can be found within every

PlayStation

®

, PlayStation

®

2, and PLAYSTATION

®

3 software manual.

For safety reasons, before cleaning the system or connected accessories, disconnect
the AC power cord from the electrical outlet.

Exterior surfaces (plastic cover of system and Wireless
Controller)

Follow the instructions below to help prevent the product exterior from deteriorating
or becoming discoloured.
• Wipe with a soft, dry cloth.
• Do not apply insecticides or other volatile substances.
• Do not place any rubber or vinyl materials on the product exterior for an extended

period of time.

• Do not use solvents or other chemicals. Do not wipe with a chemically-treated

cleaning cloth.

Vents

When dust accumulates in the system vents, remove the dust with a low-powered
vacuum cleaner.

Connectors

Do not use when the connectors of the system or the AC power cord are not clean. If
used when dirty, the flow of electrical current may be obstructed. Remove the dirt
with a dry cloth.

Wireless networking feature

Moisture condensation

Cleaning

Backing up data

You should where possible make periodic back-ups of data stored on the hard
disk drive as a precaution against possible loss or corruption. If for any reason
software or data loss or corruption occurs, it is not possible to restore or repair the
software or data. Note that SCEE will not be liable for any loss or corruption of
data, files or software.

File types that can be backed up, Handling, Storage

Cleaning method, Discs

• Изображение
• Текст

8

Precautions

File types that can be backed up

The following file types saved on the system’s hard disk can be backed up by copying
the files to storage media or a USB device. Select the file that you want to copy, press
the

button, and then select «Copy» from the options menu. You may not be able

to copy files that contain copyright-protected data.

* M.S. / SD / CF slot-equipped models only

Note on compatibility

Some media may have region or territorial restrictions and may not work with your
system. See media packaging for details.

Handling

• Do not touch the disc surface when handling a disc; hold it by the edges.
• Do not stick paper or tape onto discs and do not write on discs.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce

sound quality. Always handle carefully and check that discs are clean before use.

Storage

• Do not expose discs to high temperatures, high humidity or direct sunlight.
• When discs will not be used for an extended period of time, store them in their

cases. Stacking uncased discs or storing them at an angle can cause them to warp.

Cleaning method

• Clean discs with a soft cloth, lightly wiping from the centre outwards.
• Do not use solvents, record cleaners, anti-static spray or

other chemicals as these can damage the discs.

File type

Back up destination

Saved data from games; video, audio or
image files

Memory Stick™ media

*

SD Memory Card

*

CompactFlash

®

*

USB mass storage device (USB flash drive, etc.)

Discs

9

Before requesting service

T

roub

le

sho

o

ting

GB

Go through this section if you experience difficulty in operating the PS3™ system.
Should any problem persist, contact the appropriate PlayStation

®

customer service

helpline which can be found within every PlayStation

®

, PlayStation

®

2, and

PLAYSTATION

®

3 software manual.

The system does not turn on.

, Check that the main power switch on the system rear is turned on.
, Check that the AC power cord is securely inserted in the system and the electrical

outlet.

There is no picture on the TV screen.
, Check that the input mode of the TV is appropriate for the connector in use on

the system.

, There may be a problem with the AV cable in use. Try using another cable that

is compatible with the PS3™ system.

, If the video output settings on the system do not match those of the cable or TV

in use, there may be no picture. If the screen goes blank, turn off the system.
Then, with only the system and the TV connected, touch the system’s power
button for more than 5 seconds to turn the system back on. The video output
settings will automatically be reset to the standard resolution.

, If the resolution of the video content is not supported by the TV in use, when the

video is played the screen may go blank. If this happens, go to the screen for
selecting the resolution in the system’s video output settings, select «Custom»,
and then select all the resolutions that are supported by the TV.

The Blu-ray Disc (BD) or DVD cannot be played, or the picture is
distorted.
, When outputting DVD content or PLAYSTATION

®

3 format software in SD

resolution, only discs recorded in the PAL standard can be played.

, If the system is connected to a VCR or a combination TV/VCR unit, copy

protection encoding on some BDs and DVDs may cause image distortion, or may
cause the image to become lighter or darker. In such cases, connect the system to
the TV directly.

, If the BD or DVD does not match the region code set in the system, it cannot be

played.

, Some DVDs are preset with parental control restrictions. Enter the password that

was set in «Security Settings» to temporarily increase the viewer age restriction
level.

, Some BDs are preset with parental control restrictions. Enter the password that

was set in «Security Settings» to change the parental control level.

, The BD may be disc-locked. Enter the password that was set when the disc was

created.

, See also the notices under «Playable discs» (

page 18).

The size of the video image and the TV screen do not match.

, Check that the system’s video output settings are correct.
, Check that the settings of the connected TV are correct. For details, refer to the

instructions supplied with your TV.

, With some video content, the screen size cannot be changed.

The screen colour does not seem right.
, The system’s background colour changes automatically in time with the hour of

the day.

There is no sound.
, Check that the muting function on the TV or speakers is turned off. Also check

that the volume is at the appropriate level.

Troubleshooting

Before requesting service

Power

Picture

Audio

Before requesting service , If an audio device is connected…

Страница 10

• Изображение
• Текст

10

Before requesting service

, If an audio device is connected, check the settings of the device. For details, refer

to the instructions supplied with the audio device.

, There may be a problem with the AV cable. Try using another cable that is

compatible with the PS3™ system.

, Some software do not support digital audio output.
, If the system’s audio output settings do not match the cable or device in use, the

system may not produce sound. Check that the system’s audio output settings are
correct.

, Some content that support Dolby Digital, DTS, and other formats may not

produce audio from all channels.

Music files do not play.
, Tracks with a time limit or a limited number of playing times cannot be played.
, Some copyright-protected music data cannot be played.

Even after selecting an item from the control panel, the desired
operation cannot be performed.

, Playback conditions may be set in advance by the software developer. In such

cases, certain options may not be available, even if you follow the instructions in
the product documentation.

A connection to the network cannot be established.
, Check that the Ethernet cable is securely connected.
, Check that the network settings are correct. Refer to the instructions supplied by

your Internet service provider or in the software manual to make the correct
network settings.

The Web page does not display properly.

, Some Web pages may not display properly due to the browser.

The system does not recognise the disc.

, Remove the disc and reinsert it.
, If the disc has a label, insert it with the label side up.
, Check whether the disc is scratched or dirty. If dirty, wipe it gently with a soft

cloth.

, See also the notices under «Playable discs» (

page 18).

The system does not recognise the media.

, Check that the media is inserted correctly.
, If the storage media is formatted (initialised) on a PC, the system may not

recognise it. After copying the required data to a PC, try reformatting the media
on the PS3™ system.

, Check whether the media slot is dirty. If dirty, wipe it with a cotton swab.
, There may be a problem with the media in use. Try using another media that is

compatible with the PS3™ system.

Storage media or a USB Mass Storage Class device is not recognised
by the system.

, In some cases, the system may not recognise storage media or a USB Mass

Storage Class device if more than the allotted number of media or devices are
connected. Try removing unused media or devices.

The disc cannot be removed.

, Touch the eject button on the system front for 10 seconds or longer to force the

disc to eject. After removing and before reinserting a disc into the system, turn
off the system, and then turn on the system again to resume use.

Video

Network

Storage media and disc media

Комментарии