Инструкция по эксплуатации wall scanner 80

Для ознакомления с инструкцией необходимо нажать на ссылку «ЗАГРУЗИТЬ», чтобы скачать pdf файл. Если есть кнопка «ПРОСМОТР», то можно просто посмотреть документ онлайн.

Для удобства, Вы можете сохранить данную страницу с файлом руководства по эксплуатации в свой список «избранное» прямо на сайте (доступно для зарегистрированных пользователей).

Смотрите инструкцию для похожих моделей:

Технические характеристики

Operating manual

Wire, metal and wood detector

Model: Wall Scanner 80

INSTRUMENTS

MEASUREMENT FOUNDATION

2

Table of contents

1. Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. Detection performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6. Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

7. Maintenance and service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

8. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

9. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

10. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Appendix 1. Certicate of acceptance and sale

Appendix 2. Warranty card

MEASUREMENT FOUNDATION

3

INSTRUMENTSINSTRUMENTS

Intended Use

The measuring tool is intended for the detec—

tion of metals (ferrous and non-ferrous metals,

e.g., rebar), joists and ‘live’ wires/conductors

in walls, ceilings and oors.

Product Features

1. Red light indicator

2. Yellow light indicator

3. Green light indicator

4. Display

5. ON/OFF button

6. Wood detection button

7. Metal/live wire detection button

8. Felt pad

9. Sensor area

10. Felt pad

11. Battery compartment

MEASUREMENT FOUNDATION

4

DISPLAY ELEMENTS

a) Indicator for magnetic/non-magnetic metals

b) Indicator for the current detection mode (wood,

live wire, metal)

c) Battery indicator

d) Indicator of metal depth detection

e) Indicator of “Autocal” calibration

f) Indicator of the detected object regarding the area

center (sensor area)

g) Signal strength

MEASUREMENT FOUNDATION

5

INSTRUMENTSINSTRUMENTS

Technical data

Maximum scanning depth*:

Ferrous metals 80 mm

Non-ferrous metals (Copper) 60 mm

Copper conductors(live)** 50 mm

Wood 20 mm

Automatic switch off after approx. 5 min

Operating temperature -10 °C…+50°C

Storage temperature -20°C…+70°C

Battery 1×9 V

Operating lifetime approx. 6 h

Weight 0.12 kg

*Depends on material and size of objects as material and condition of structure.

**Scanning depth will be smaller if wires/conductors are not “live”.

MEASUREMENT FOUNDATION

6

Operation

INSERTING/REPLACING THE BATTERY

Use only 9Vbattery. Insert the battery into the battery compartment (12) in accordance with the symbols in the battery com—

partment. Remove the batteries if the unit will not be used for a long period. The battery can be corroded or discharged over

long periods.

SWITCHING ON AND OFF

Protect the measuring tool against moisture and direct sun irradiation. Before switching the measuring tool on, make sure that

the sensor area 8 is dry. If required, wipe the measuring tool dry using a cloth.

The object to be measured Depth of detection Accuracy of detection

Rebar/copper tube ø 20 8 cm/6 cm

±1 cm

ø 16 7 cm/6 cm

ø 12 6 cm/5 cm

ø 6 5 cm/5 cm

Live wire and cable 5 cm

Wood Wooden beam 2 cm

Wooden batten 2 cm

Detection performance

MEASUREMENT FOUNDATION

7

INSTRUMENTSINSTRUMENTS

If the measuring tool was subject to an extreme temperature change, allow it to the adjust to the ambient temperature before

switching on. Press ON/OFF button to switch on the instrument. After a short test the detector is ready for operation. The

measuring tool automatically enter the function mode of metal detection. It is necessary to calibrate the instrument if you

hear sound alarm and see the red light indicator.

The calibration method is: place the instrument on nonmetallic surface or hold it in the hand away from any materials. Press the

metal button 7 until you hear sound alarm and green light is lit. Sound alarm and green light indicator show that the calibration

has been nished. Release button 7 to detect metal objects.

DETECTION OF OBJECTS

The detection of metal objects

Press button 7 to detect metal objects. Symbol b (the metal detection indicator) is indicated on the display and the green light is lit.

Place the measuring tool onto the surface to be scanned and move it sidewards, when the measuring tool comes close to a metal

object, the amplitude of the measuring indicator g increases. When it moves away from the object, the amplitude decreases, at the

position of maximum amplitude, the metal object is located below the center of the sensor. Indicator f is displayed on the display

and a steady tone sounds.

Indicator d (detection depth value) is displayed on the display when scanning metal objects. The accuracy of depth value is a

relation of shape and position of scanning metal objects. Symbol a shows whether metal is magnetic or not.

The detection of wooden objects

When scanning for wooden objects, the detector must come close to the wall. Then press the wood detection button 6. Don’t

move the instrument. Wait for the completion of calibration. When the calibration will be nished, you will see green light detec—

tor and there will be icon b (wood) on the display.

Place the measuring tool onto the surface and move around. When the detector come close to the wooden objects, the display

scale of g in the display will gradually increase. When the detector slowly moves away from object, the display scale will gradu—

MEASUREMENT FOUNDATION

8

ally decrease. A loud tone sounds when the instrument detects the object. If the object is located in the center of sensor area, the

icon f will appear on the display. The instrument makes a steady sound and the green light is lit.

Scanning for “live” wires

Press button 7 two times to activate “live” wires mode. The icon b appears on the display. Make the calibration if there is a sound

alarm, red light indicator and the instrument can’t detect the “live” wires.

Calibration: Place the instrument on nonmetallic surface or keep it in the hand far away from any materials. Press the metal

button 7 until you hear sound alarm and green light is lit. Sound alarm and green light indicator show that the calibration has

been nished. Release button 7 to detect metal objects.

The detector can detect 50 or 60 Hz (HZ) AC live power cables, other wires can only be indicated as metal objects.

Move the measuring tool over the surface repeatedly in order to determine the specic location of the live cables. After moving

the measuring tool over the surface several times, the detector is able to pinpoint the hiding place of “live” wires/conductor.

There is a red light indicator when the measuring tool is very close to the live wire. Signal tone sound with a rapid tone se—

quence. “Live”wires/conductors can be detected easier when power consumers (e.g., lamps, appliances) are connected to the

wire/conductor being sought and switched on. Wires/conductors with 110 V, 240V and 380 V (three-phase current) are detected

with about the same scan capacity.

Operating Instructions

In accordance with the principles of tool operation, the measuring values can be impaired through certain ambient

conditions. These include, e.g. the proximity of other equipment that produce strong magnetic or electromagnetic elds,

moisture, metallic building materials. Foil-laminated insulation materials or conductive wallpaper. Therefore, please

also observe other information sources (e.g. construction plans) before drilling, sawing or routing into walls, ceilings

or oors.

MEASUREMENT FOUNDATION

9

INSTRUMENTSINSTRUMENTS

Maintenance and service

Wipe away debris or contamination with a dry, soft cloth. Do not use cleaning agents or solvents. In order not to affect the

measuring function, decals/stickers or name plates, especially metal ones, may not be attached in the sensor area 8 on the

front or back side of the measuring tool. Do not remove the felt pads 7 on the back side of the measuring tool. Replace

the felt pads when then are damaged or used. For this, completely remove the felt pads and glue the new felt pads onto

the same spots. Store and transport the measuring tool only in the protective case.

Disposal

Measuring tools, accessories and packaging should be sorted for environmental-friendly recycling.

Only for EC countries:

Do not dispose of measuring tools into household waste! According the European Guideline 2002/96/EC for Waste

Electrical and Electronic Equipment and its implementation into national right, measuring tools that are no longer usable

must be collected separately and disposed of in an environmentally correct manner.

Battery packs/batteries: Do not dispose of battery pack/ batteries into household waste, re or water. Battery packs/

batteries should be collected, recycled or disposed of in an environmental-friendly manner.

Only for EC countries:

Defective or dead out battery packs/batteries must be recycled according the guideline 91/157/EEC.