Инструкция вокальный процессор tc helicon voicelive touch

Quick Links

• Page 1
  ANUAL…
• Page 2
  MPORTANT AFETY NSTRUCTIONS AUTION Read these instructions. You are cautioned that any change or modifications not expressly Keep these instructions. approved in this manual could void your warranty. Heed all warnings. EMC/EMI Follow all instructions. Do not use this apparatus near water. This equipment has been tested and found to comply with the limits for Clean only with dry cloth.
• Page 3
  2. Download VoiceSupport – Get the latest firmware for your product, tips and tricks, and videos. Download and install VoiceSupport from www.tc-helicon.com/voicesupport. 3. Register Your Product in VoiceSupport – Click on the ACCOUNT button. TC Helicon Vocal Technologies Ltd. User Manual 1.2 VoiceLive Touch www.tc-helicon.com English Version…

• Page 4: Table Of Contents

  Connections …….8 VoiceLive Touch and Digital Audio ….25 Front Panel .

• Page 5: Mounting To A Mic Stand

  With no cables attached to the product, grasp it on both sides so the printed top faces you and is approximately level. Slide VoiceLive Touch to the left so that the upper shaft of your mic stand is captured by the lower slot on the product. (Figure 1) Slowly but firmly lower the front of the product so the serrated slot fully captures the micstand shaft.

• Page 6: The Voicesupport Application

  A manual for VoiceSupport is located here: Download VoiceSupport from www.tc-helicon.com/voicesupport. http://www.tc-helicon.com/voicessupport-support.asp Notes on using VoiceSupport with VoiceLive Touch The Presets tab of VoiceSupport allows you to re-arrange and rename presets and Favorites in VoiceLive Touch. Note: In the Presets window, the Favorites are located in preset slots Install VoiceSupport on your computer.

• Page 7: Connections

  Side View 9 9 . . U U S S B B C C o o n n n n e e c c t t o o r r — Used for connecting VoiceLive Touch to a computer for version updates and MIDI communication. Note that the USB connection does not provide power for the unit.

• Page 8: Front Panel

  Front Panel 1 1 . . E E F F F F E E C C T T B B L L O O C C K K S S — Tap any effect block to turn it on or off. Hold to edit, 6 6 .

• Page 9: Basic Operations

  Presets and Favorites To save a preset to a Favorite: VoiceLive Touch contains over 200 factory presets.You can store any of 1. Load a preset you want to store as a Favorite. these presets to a Favorite including any edits you’ve done on that 2.

• Page 10: Musical Control Of Harmony & Hardtune

  Cu for scale. This indicates the scale is custom, preset #3. Sing while you play guitar, MIDI keyboard or MP3 player. though it cannot be edited further in VoiceLive Touch. These inputs are interpreted to produce moving harmony intervals that…

• Page 11: Editing Procedure

  Basic Operations To overdub the next layer: When you have found the parameter you want to change, swipe quickly or drag along the Slider. 1. Load a different Favorite or preset if desired, then start To store edits to a Favorite, hold any Favorite button. playback and press Record when ready to add your layer.

• Page 12
  Basic Operations 5 Tempo — Parameter appears when delay style is set for tap tempo Harm+Dbl: Transducer is inserted on the Harmony and Doubling (styles 1-16 only). Used to set delay time via beats per minute (BPM). paths only. Voices: Transducer is inserted on the Lead, Harmony and Doubling voices and their effect sends.

• Page 13: Using The Guitar Features

  MIDI channel set in the Setup menu. VoiceLive Touch allows adjustment of the global guitar level (Guitar) and 6 Key and 7 Scale — Sets Harmony control to a fixed key and one of the…

• Page 14: Finding Presets With The Preset Wizard

  Basic Operations To exit the Setup menu, double tap the Slider. INDING RESETS WITH THE RESET IZARD The Setup parameters are listed below: In Home mode, press and hold the Slider 1 Phantom — Turn this on to provide 48V phantom power if you are using Drag the slider to choose a preset category a condenser microphone.

• Page 15
  Basic Operations Mono — Set when using the single XLR output jack only. setting in their Harmony edit menu. Thus, one Favorite could be controlled by a guitar and another could be controlled by MIDI. Dual Mono — Allows independent external mix control of mono wet guitar and mono wet vocals.

• Page 16: Performing A Reset

  The Lock mode is especially useful on worship teams or situations where and the top Octave harmony voicing buttons until you see “Factory Init”. there is more than one singer, each using VoiceLive Touch. In Lock mode, Release. the user interface features are locked out except for accessing the Favorites and Talk.This way a leader can program the units in advance and…

• Page 17: Midi Setup Menu

  The MIDI setup menu allows you to adjust settings relating to control of ID or they all will be edited in the same way. VoiceLive Touch from a MIDI keyboard or a sequencer. See above for instructions on accessing the MIDI setup menu.

• Page 18: The Advanced Setup Menu

  The Advanced menu contains less often used system-level parameters. Output — This can decrease the overall output level of VoiceLive Touch in See previous to see how to access this menu.

• Page 19
  Advanced Setup Menu Demo — There is a looped vocal recording in VoiceLive Touch that can be used to facilitate self demonstration. Turning this parameter to On will change the user interface prompt to offer this feature. When Demo mode is selected, the demo will take 10-15 seconds to load.

• Page 20: Advanced Looping: Loops Mode

  Advanced Looping: Loops Mode Understanding the L L o o o o p p s s mode display and controls: : LOOPS M DVANCED OOPING Loops mode allows you to create a set of loops of the same length that can be played back in any order.

• Page 21
  Advanced Looping: Loops Mode 5 5 . . S S L L I I D D E E R R L L O O O O P P F F U U N N C C T T I I O O N N S S — Swipe right to clear the current loop. Swipe left for undo.

• Page 22: Advanced Looping: Shots Mode

  Advanced Looping: Shots Mode Understanding the S S h h o o t t s s mode display and controls: : SHOTS M DVANCED OOPING Shots mode offers you random-access loop playback. Where Loops mode allows you to cue loops so that they play one after the other, Shots mode changes the Favorite buttons into trigger buttons for you to play loops in any order at any time.

• Page 23
  Advanced Looping: Shots Mode 5 5 . . S S L L I I D D E E R R L L O O O O P P F F U U N N C C T T I I O O N N S S — Same as in Loops mode. 6 6 .

• Page 24: Usb And Digital Audio

  IGITAL UDIO parameter as such: Here are a few common methods of using VoiceLive Touch with a USB- 6 USB: INSERT connected computer and an audio application (DAW): Configure an aux send in your DAW to send the vocal track via USB to Capturing a full mix of your performance VoiceLive Touch’s left input and the guitar track to the right.

• Page 25
  Maximum sample rate VoiceLive Touch can accept is 48 kHz. Working within an 88.2 or 96 kHz DAW session may be possible but this is dependent on whether the DAW application or the computer OS automatically downsamples to VoiceLive Touch’s USB audio requirement.

• Page 26: Midi Implementation

  MIDI Implementation P P a a r r a a m m e e t t e e r r C C C C # # R R a a n n g g e e C C o o m m m m e e n n t t s s E E f f f f e e c c t t B B l l o o c c k k O O n n / / O O f f f f Harmony 0-63 off 64-127 on…

• Page 27
  MIDI Implementation P P a a r r a a m m e e t t e e r r C C C C # # R R a a n n g g e e C C o o m m m m e e n n t t s s Level Voice4 maps to 127 Gender Voice1…
• Page 28
  MIDI Implementation L L o o o o p p i i n n g g C C C C 4 4 4 4 c c o o n n t t r r o o l l v v a a l l u u e e t t a a b b l l e e PLAY 12 BANK 2 18 SHOTS TRIGGER 3…

• Page 29: Factory Preset List

  Factory Preset List SIXTH ENCORE 26 SIMPLE SLAP 51 JAZZ CLOSEUP 2 76 SING WITH RADIO CLOSE UP 3RD 27 LONGVERB DUCKED 52 JAZZ CLOSEUP 3 77 THICK 2 ABOVE TUNED UP+DOWN 28 ARENA CHANT 53 LIGHT FLANGE 78 BEACH BOY RADIO KANYE LOCKDOWN 29 AMATEUR KIDS 54 LOWER DUO…

• Page 30
  Factory Preset List 101 DELAYED UPPERS 128 LOOSE DOUBLE 155 BANDPASS VERB 182 BOLLYWOOD 102 DELAYED HARMONY 129 OCTAVE CHILD 156 DEEP DUCKED FX 183 NOW HEAR THIS! 103 LIFE IN THE F L 130 BON J-U GIVE LV 157 T- ROOM 184 BASIC NOTES 8V 104 TONE DRONE UNI 131 OCT DOWN DOUBLE…
• Page 31
  Factory Preset List 209 DEEPEST YOU Favorites: Bank A/Fav1 HARMONY CHOIR 210 THINNEST YOU Bank A/Fav2 CLOSE 1UP+1DOWN 211 OCT UP FEMALE Bank A/Fav3 KANYE LOCKDOWN 212 CROONER Bank A/Fav4 ANOTHER BRICK 213 PING PONG VERB Bank A/Fav5 CHORUS PLATE 214 BOP-A-LULA CLOSE UP 3RD 215 MULTITAP ECHO…

• Page 32: Faq And Troubleshooting

  Alternate tunings e.g. drop D, DADGAD, etc. are okay. The most Move your vocal monitor so it faces the jack end of your mic.Turn Tone important notes of your chord, as far as VoiceLive Touch is concerned, to the Off or Less Bright style in the Setup menu.

• Page 33: Appendix: Looping Tutorial

  Western music usually relies on a repeating 4 beat rhythm. For example: VoiceLive Touch is meant to be done from scratch in the heat of | Kick | Snare | Kick-Kick | Snare |. A bar in this type of music is always performance.

• Page 34: How To Get Started With Vocal Looping

  See if you can get some to sing through no effect, relying on your voice alone for the sound you seamless beatboxing happening! are looking for, most times, the presets in VoiceLive Touch will give you a huge creative range. Layer Cake…

• Page 35
  «undid». The «Redo» buffer Tip: the great thing about VoiceLive Touch is you can keep the action will be reset if you initiate a new undoable action (like starting a new going at all times.

• Page 36: How To Expand Your Vocal Looping Horizons

  Appendix: Looping Tutorial Step 3:You should see «LOOPS» on the display. Next, record a loop in OW TO XPAND OCAL OOPING exactly the same way as you did in step 3 of Getting Started. ORIZONS Step 4: You should see «1:N» with an animated progress bar at the far right of the display.

• Page 37
  Appendix: Looping Tutorial you’ve got a thick loop going and you’re vamping/overdubbing a new arrow to move to loop 3. Notice whatever you had in loop 2 will now layer and you suddenly want to create a huge dramatic moment. You also be in loop 3.
• Page 38
  Appendix: Looping Tutorial Shots Mode Step 5: Try stopping the loop. The display should switch to show «SHOTS». Hitting play again will bring back the «1:N» display. Try double Shots Mode gives you instant access to your loops through the 5 favorite clicking the slider to go back to Presets Mode (home).
• Page 39
  Appendix: Looping Tutorial you’ve got a thick loop going and you’re vamping/overdubbing a new a walk-through of how you might choose to record a set of samples to layer and you suddenly want to create a huge dramatic moment. You trigger at will: can instantly clear the loop, but since you’re still recording, the next time Step 1: Start from a clean slate, and double click the slider to return…

• Page 40: Tips And Tricks

  Appendix: Looping Tutorial Auto Copy moving to another loop, then holding the right portion of the touch In Loops Mode we saw that moving to a new loop would automatically slider to paste (the display will flash «PASTE»). This is different from copy the audio from the previous loop.

• Page 41: Specifications

  Specifications A A n n a a l l o o g g I I n n p p u u t t s s P P o o w w e e r r Connectors: Mic: Balanced XLR, Guitar: 1/4″ phone jack, Aux: 1/8″ stereo mini jack External Power Supply Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select) Input Impedance: Balanced/Unbalanced Mic.: 2.14/1.07 kOhm…

Когда звук считается слишком громким?

Могут ли устройства разных марок подключаться друг к другу при помощи Bluetooth?

Как лучше всего выполнять чистку hi-fi система?

Инструкция TC Helicon Voicelive Touch доступно в русский?

1. Manuals
2. Brands
3. TC-Helicon Manuals
4. Music Pedal
5. VOICELIVE Touch
6. Quick start manual

Quick Links

• Page 1
  UICK TART…
• Page 2
  MPORTANT AFETY NSTRUCTIONS AUTION Read these instructions. You are cautioned that any change or modifications not expressly Keep these instructions. approved in this manual could void your warranty. Heed all warnings. EMC/EMI Follow all instructions. Do not use this apparatus near water. This equipment has been tested and found to comply with the limits for Clean only with dry cloth.

• Page 3: Table Of Contents

  When you see this icon, it means there is more information Using the Lockout Modes ……… 15 regarding the feature in the Details manual. FAQ and Troubleshooting ……..16 Specifications …………17 TC Helicon Vocal Technologies Ltd. Quick Start revision 1.0 VoiceLive Touch www.tc-helicon.com English Version…

• Page 4: Mounting To A Mic Stand

  With no cables attached to the product, grasp it on both sides so the printed top faces you and is approximately level. Slide VoiceLive Touch to the left so that the upper shaft of your mic stand is captured by the lower slot on the product. (Figure 1) Slowly but firmly lower the front of the product so the serrated slot fully captures the micstand shaft.

• Page 5: The Voicesupport Application

  The VoiceSupport Application Page Head To access the VoiceSupport application SING OICE UPPORT Download VoiceSupport from www.tc-helicon.com/voicesupport. VoiceSupport is your way of getting the most from your TC-Helicon product, as well as letting your product grow with firmware updates that include new features.

• Page 6: Connections

  Z (impedance) In jack. If you use effect pedals, they should be Rear View connected after VoiceLive Touch. Plug a 1/4” cable from the Thru jack to your first effect pedal or to your amplifier/PA. If you leave the Thru unconnected, the guitar sound will be mixed into the main output of VoiceLive Touch.

• Page 7: Front Panel

  Front Panel 1. EFFECT BLOCKS — Tap any effect block to turn it on or off. Hold to 6. LOOP CONTROLS — Tap red button to record and again to loop. edit, then tap to exit. Holding the Delay button is used to set tap tempo. Tap green to stop and play.

• Page 8: Basic Operations

  Presets and Favorites To save a preset to a Favorite: VoiceLive Touch contains over 200 factory presets. You can store any 1. Load a preset you want to store as a Favorite. of these presets to a Favorite including any edits you’ve done on that 2.

• Page 9: Musical Control Of Harmony & Hardtune

  Try each scale for best fit with your music. The harmony and HardTune effects require musical information to Now, sing the song with your accompaniment. sound correct with your accompaniment. VoiceLive Touch dynamically detects whether a single device (guitar, MIDI or MP3 player) is ASIC OOPING connected and temporarily assigns it as the musical control device.

• Page 10: Editing Procedure

  More detailed information on basic looping as well as the 3 Lead Level — Lowers lead (dry voice) when the effect is the only one advanced Loops and Shots modes can be found on the VoiceLive Touch active. Useful for 100% wet effects when needed.

• Page 11
  Basic Operations sound from 0% (mono) to 100% (stereo). Harm+Dbl: Transducer is inserted on the Harmony and Doubling paths only. 5 Tempo — Parameter appears when delay style is set for tap tempo (styles 1-16 only). Used to set delay time via beats per minute (BPM). Voices: Transducer is inserted on the Lead, Harmony and Doubling voices and their effect sends.

• Page 12: Using The Guitar Features

  PA. This is in addition to the guitar being useful for guiding harmonies. 6 Key and 7 Scale — Sets Harmony control to a fixed key and one of the VoiceLive Touch allows adjustment of the global guitar level (Guitar) 3 Major and 3 minor scales when the Naturalplay setting is configured and effects level (Gtr Fx) selection parameters when you press the Mix for Scale.

• Page 13: Finding Presets With The Preset Wizard

  Basic Operations Setup menu, tap the Slider. INDING RESETS WITH THE RESET IZARD To exit the Setup menu, double tap the Slider. & In Home mode, press and hold the Slider Holding the left or right Arrow buttons while in the Setup menu Drag the slider to choose a preset category will cycle to the MIDI and Advanced menus for further parameter Tap the Slider…

• Page 14
  Basic Operations 6 Thk + Arena — Thicken plus long arena reverb you have entered in the Harmony edit menu will apply to all presets 7 Arena — Arena reverb only (On) or each preset may have a different key and scale (Off). 5 Output — Configures the outputs for stereo or mono.

• Page 15: Using The Lockout Modes

  The Lock mode is especially useful on worship teams or situations where subsequent tap/release=Record on/off during playback, tap/hold=undo there is more than one singer, each using VoiceLive Touch. In Lock /redo previous, double tap=Stop. mode, the user interface features are locked out except for accessing the MIDI Chan — Choose a channel from 1 to 16 to match the MIDI output Favorites and Talk.

• Page 16: Faq And Troubleshooting

  Alternate tunings e.g. drop D, DADGAD, etc. are okay. The most Why do the Favorite buttons flash? important notes of your chord, as far as VoiceLive Touch is concerned, They show that you have made an edit. Either store the edit or reload are the chord root and the third, so make sure these notes are clearly the Favorite.

• Page 17: Specifications

  Specifications Analog Inputs Power Connectors: Mic: Balanced XLR, Guitar: 1/4” phone jack, Aux: 1/8” stereo mini jack External Power Supply Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select) Input Impedance: Balanced/Unbalanced Mic.: 2.14/1.07 kOhm Power Consumption: <14 W Mic Input Level @ 0 dBFS: -42dBu to +1dBu EIN @ Max Mic Gain Rg = 150 Ohm: -127 dBu Safety…