Jvc kd x30 инструкция по подключению

MANUALSCAT | EN

Question & answers

Have a question about the JVC KD-X30 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the JVC KD-X30. Please make sure that you describe your difficulty with the JVC KD-X30 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

How do I set in memory a radio station?

Riciard Timofte2021-07-07

Chek warning then reset unit

Suyog jadhav2021-08-22

Bt audio.. What is that? Bluetooth connection? How can i content?

Tom2023-01-25

Page: 1

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
Battery
Products
Information for Users on Disposal
of Old Equipment and Batteries
[European Union only]
These symbols indicate that the product
and the battery with this symbol should
not be disposed as general household
waste at its end-of-life.
If you wish to dispose of this product and
the battery, please do so in accordance
with applicable national legislation or other
rules in your country and municipality.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects
on the environment and human health.
Notice:
The sign Pb below the symbol for batteries
indicates that this battery contains lead.
.
How to reset your unit
Your preset adjustments will
also be erased.
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may
result in damage to the unit.
.
Warning:
Stop the car before operating the unit.
Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too high
may cause an accident.
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.
Caution on volume setting:
Digital devices (USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by the sudden increase of
the output level.
Temperature inside the car:
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
How to read this manual:
This manual mainly explains operations using
the buttons on the control panel.
< > indicates the displays on the control
panel.
[XX] indicates the initial setting of a menu
item.
2 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 2

Contents
Preparation …………………………………………………… 3
Canceling the display demonstration
Setting the clock
Basic operations …………………………………………… 4
Remote controller ………………………………………….. 5
Radio ……………………………………………………………… 6
USB …………………………………………………………………. 8
iPod/iPhone (KD-X40 only) ……………………………. 9
External components ……………………………….. 10
Bluetooth姞 …………………………………………………… 10
Illumination color adjustments
(KD-X40 only) ………………………………………………… 11
Brightness adjustments ……………………………. 12
Sound adjustments …………………………………… 12
Menu operations ……………………………………….. 13
Additional information …………………………….. 16
Troubleshooting ………………………………………… 18
Specifications …………………………………………….. 19
Preparation
Canceling the display
demonstration
The display demonstration is always turned on
unless you cancel it.
(Hold)
1
(Initial setting)
2
3 Select <DEMO OFF>.
4 Press MENU to exit.
Setting the clock
(Hold)
1
2 Select <CLOCK>.
3 Select <CLOCK SET>.
(Initial setting)
4 Adjust the hour.
5 Adjust the minute.
6 Select <24H/12H>.
7 Select <24 HOUR> or <12 HOUR>.
8 Press MENU to exit.
ENGLISH‫|ޓ‬ 3
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 3

Remote controller
USB input terminal
Front AUX input jack
DO NOT expose to bright sunlight.
Remote sensor
Display window
Control dial
Control panel
(For KD-X40 only)
Aim the remote controller directly at the sensor.
When you press or hold the following button(s)…
Control panel
Remote
controller
General function
/SOURCE
—
Turns on.
Turns off. (Hold)
Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
SOURCE Press repeatedly to select the source.
Control dial
(turn)
VOL — / + Adjusts the volume level.
— Selects items.
Control dial
(press)
)
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
— Confirms selection.
—
Enters <BRIGHTNESS> menu directly. (KD-X30 only)
(‘ page 12)
iPod —
Switches to iPod source. (KD-X40 only)
Switches the iPod mode when in the iPod source. (KD-X40
only) (‘ page 9)
EQ SOUND Selects the preset sound mode. (‘ page 12)
—
Activates/deactivates TA Standby Reception. (‘ page 7)
Enters PTY Search mode. (Hold) (‘ page 7)
Returns to the previous menu.
Exits from the menu. (Hold)
/ /
Selects a preset station. (‘ page 6)
Selects MP3/WMA folder. (‘ page
/ /
Searches for a station automatically. (‘ page 6)
Searches for a station manually. (Hold)
Selects track. (‘ page 8, 9)
Fast-forwards or reverses track. (Hold)
.
KD-X30 can be remotely controlled as instructed here (with an optionally purchased remote
controller). We recommend that you use remote controller RM-RK52 with your unit.
Basic operations
Basic operations
4 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 4

Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source Display
Radio Non-Radio Data System station: Frequency ) Clock
FM Radio Data System station: Station name (PS) — Frequency —
Programme type (PTY) — Clock — (back to the beginning)
USB Album title/Artist — Track title — Track no./Playing time — Track no./
Clock — (back to the beginning)
iPod/iPhone (HEAD MODE/
IPOD MODE) *1
iPod/iPhone (EXT MODE) *1 EXT MODE) Clock
External Components (AUX) F-AUX or R-AUX) Clock
Bluetooth Audio BT AUDIO) Clock
*1 For KD-X40 only.
Remote controller
Preparing
When you use the remote controller for the first
time, pull out the insulation sheet.
Insulation sheet
Replacing the lithium coin
battery
If the effectiveness of the remote controller
decreases, replace the battery.
CR2025
Caution:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Warning:
Do not install any battery other than CR2025 or
its equivalent.
Do not leave the remote controller in places
(such as dashboards) exposed to direct
sunlight for a long time.
Store the battery in places out of reach of
children.
Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
Do not place the battery with other metallic
materials.
Do not poke the battery with tweezers or
similar tools.
Insulate the battery by wrapping it with tape
when disposing or storing it.
This unit is equipped with the steering wheel
remote control function. For details, refer also to
the instructions supplied with the remote
adapter.
Basic operations
ENGLISH‫|ޓ‬ 5
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 5

Searching for a station
A B Select <FM> or <AM>.
Auto search. (Press)
Manual search. (Hold)
“M” flashes, then press the button repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.
While listening to a station…
(Hold)
“PRESET MODE” flashes.
1
The preset number flashes and “MEMORY”
appears.
2 Select preset number.
Auto presetting (FM only)
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
(Hold)
1
-<TUNER>
-<SSM>
-<SSM 01 – 06>
“SSM” flashes. When all the stations are stored,
“SSM” stops flashing.
2
To preset <SSM 07 – 12>/<SSM 13 – 18>,
repeat steps 1 and 2.
Selecting a preset station
You can also select a preset station using / .
Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
(Hold)
1
-<TUNER>
-<RADIO TIMER>
-<OFF>/<ONCE>/
<DAILY>
[OFF] Cancels Radio Timer.
ONCE Activates once.
DAILY Activates daily.
2
-<FM>/<AM>
-<01> … <18> for FM/
<01> … <06> for AM
3 Select the preset station.
4 Set the activation time.
5 Press MENU to exit.

Page: 6

lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if <AM> is set to <OFF> after
selecting an AM station for the timer.
Radio
Radio
6 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 7

The following features are available only
for FM Radio Data System stations.
Searching for your favorite
Programmes—Programme
Type (PTY) Search
(Hold)
1
PTY Search starts.
If there is a station broadcasting a programme of the
same PTY code as you have selected, that station is
tuned in.
2 Select a PTY code.
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M
(music), LIGHT M (music), CLASSICS, OTHER M (music),
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONEIN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M
(music), OLDIES, FOLK M (music), DOCUMENT
Activating TA/News Standby
Reception
Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) or
NEWS programme from any source other than
AM.
TA Standby Reception
TP indicator TA Standby Reception
Lights up
The unit will temporarily switch
to Traffic Announcement (TA) if
available.
Flashes
Not yet activated. Tune in to
another station providing the
Radio Data System signals.
To deactivate, press again.
NEWS Standby Reception
(Hold)
1
-<TUNER>
-<NEWS-STBY>
-<NEWS ON>
The unit will temporarily switch to News
Programme if available.
2
If the volume is adjusted during reception of
Traffic Announcement or News, the adjusted
volume is automatically memorized. It will be
applied the next time the unit switches to
Traffic Announcement or News.
Tracking the same programme
—Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System station
of the same network, possibly broadcasting the
same programme with stronger signals.
(Hold)
1
-<TUNER>
-<AF-REG> *
2
[AF ON]
Switches to another station.
The programme may differ
from the one currently received
(the AF indicator lights up).
AF-REG ON
Switches to another station
broadcasting the same
programme (the AF indicator
lights up).
OFF Cancels.
* AF-REG: Alternative Frequencies-Regional
Automatic station selection—
Programme Search
When the signal of a preset station you have
selected is weak, this unit searches for another
station possibly broadcasting the same
programme as the original preset station is
broadcasting.
<P-SEARCH> (‘ page 15)
Radio
ENGLISH‫|ޓ‬ 7
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 8

Playing a USB device
USB 2.0 cable (not supplied)
USB input terminal
The source changes to “USB” and playback starts.
This unit can play MP3/WMA files stored in USB mass storage device (such as a USB memory and
Digital Audio Player).
Make sure all important data has been backed up. We shall bear no responsibility for any loss of data
in USB mass storage class device while using this system.
Selecting a folder/track
Selects folder.
Selects track. (Press)
Fast-forwards or reverses
the track. (Hold)
Selecting a track/folder from
the list
1
2 Select a folder.
If the USB device contains many folders or
tracks, you can fast search for desired folder or
track by turning the control dial quickly.
3 Select a track.
Selecting the playback modes
You can select one of the following playback
modes at a time.
(Hold)
1
#<REPEAT>)<RANDOM>
2
3
REPEAT
RPT OFF Cancels repeat playback.
TRACK RPT Repeats current track.
FOLDER RPT Repeats current folder.
RANDOM
RND OFF Cancels random playback.
FOLDER RND
Randomly plays all tracks of
current folder, then tracks of
next folders.
ALL RND Randomly plays all tracks.
USB
USB
8 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 9

iPod/iPhone
KD-X40 only
Playing an iPod/iPhone
USB 2.0 cable (accessory of the iPod/iPhone)
USB input terminal
The source changes to “USB”-“USB-IPOD” and playback starts.
Selecting the control mode
#<HEAD MODE>/<IPOD MODE>/
<EXT MODE>
HEAD
MODE
Controls iPod playback through this
unit.
IPOD
MODE
Controls iPod playback from the
iPod/iPhone.
EXT
MODE
Allows any audio signals from iPod/
iPhone.
You can also change the setting using <IPOD
SWITCH> in the menu. (‘ page 15)
Selecting a track
Applicable under <HEAD MODE/IPOD MODE>
only.
Selects track/chapter.
(Press)
Fast-forwards or reverses
the track. (Hold)
Selecting a track from the list
Applicable under <HEAD MODE> only.
1
PLAYLISTS)ARTISTS)ALBUMS)SONGS)
PODCASTS)GENRES)COMPOSERS) (back to
the beginning)
2 Select the desired list.
Repeat this step until the desired track is selected.
If the selected menu contains many tracks, you
can fast search for the desired track by turning
the control dial quickly.
3 Select the desired track.
Selecting the playback modes
Applicable under <HEAD MODE> only.
You can select one of the following playback
modes at a time.
(Hold)
1
#<REPEAT>)<RANDOM>
2
3
REPEAT
ONE RPT
Functions the same as “Repeat
One” of the iPod.
ALL RPT
Functions the same as “Repeat
All” of the iPod.
RANDOM
RND OFF Cancels random playback.
SONG RND
Functions the same as “Shuffle
Songs” of the iPod.
ALBUM RND
Functions the same as “Shuffle
Albums” of the iPod.
“ALBUM RND” is not applicable for some iPod/
iPhone.
ENGLISH‫|ޓ‬ 9
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 10

For details, refer also to the instructions supplied with the external components.
Playing an external component from Front/Rear AUX
Portable audio
player, etc.
3.5 mm stereo mini plug
(not supplied)
3.5 mm stereo mini plug
(with “L” shaped connector)
(not supplied)
1 Connect to F-AUX on the control panel
and/or R-AUX on the rear panel.
(Hold)
-<SRC SELECT>
-<F-AUX>/<R-AUX>
-<F-AUX ON> or
<R-AUX ON>
Press MENU to exit.

2 Set the source as necessary.
3 Select <F-AUX> or <R-AUX>.
4 Turn on the connected component and
start playing the source.
Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound
may be interrupted or unclear while listening to an external component.
Bluetooth姞
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100
(separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of
the unit. (‘Installation/Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you
purchased this unit.
Operations may be different depending on the connected Bluetooth device. For
details, refer also to the instructions supplied with the device.
Preparation
For details on registering and using the Bluetooth device, refer to the instructions manual supplied with
KS-BTA100.
1 Register (pair) a Bluetooth device with KS-BTA100.
-<SRC SELECT>
-<R-AUX>
-<BT ADAPTER>
2 Change the <SRC SELECT> settings of this unit.
(Hold)
3 Press MENU to exit.
KS-BTA100
External components
External components
10 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 11

Illumination color adjustments
KD-X40 only
All zone
Display zone
Button zone
All zone: Includes both Button zone and
Display zone.
Selecting the preset color
You can select a preset color for <BUTTON
ZONE>, <DISP ZONE>, and <ALL ZONE>
separately.
(Hold)
1
2 Select <COLOR>.
BUTTON ZONE COLOR 01-29/USER/
COLOR FLOW 01-03*
* Color changes in
different speeds.
DISP ZONE
ALL ZONE
Initial color: BUTTON ZONE [06], DISP ZONE
[01], ALL ZONE [06].
If <ALL ZONE> is selected, the button and
display illumination will change to the current/
selected <BUTTON ZONE> color.
3
4 Press MENU to exit.
Storing your own adjustments
You can store your own day and night colors for
<BUTTON ZONE> and <DISP ZONE> separately.
(Hold)
1
2 Select <COLOR SETUP>.
DAY
COLOR
BUTTON
ZONE
Select a primary
color <RED/GREEN/
BLUE>, and then
adjust the level
<00-31>. Repeat this
procedure until you
have adjusted all the
three primary colors.
Your adjustment is
automatically stored
to “USER”.
If “00” is selected for
all the primary colors
for <DISP ZONE>,
nothing appears on
the display.
DISP
ZONE
NIGHT
COLOR
BUTTON
ZONE
DISP
ZONE
MENU
COLOR
ON
Changes the display and
buttons illumination
during menu, list search,
and playback mode
operations.
OFF
NIGHT COLOR/DAY COLOR is changed by
turning on/off your car’s headlight.
3
4 Press MENU to exit.
ENGLISH‫|ޓ‬ 11
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 12

You can select your preferred brightness for <BUTTON ZONE>, <DISP ZONE> separately.
Brightness button is only available for KD-X30.
For KD-X40, ‘ page 13.
1
BUTTON ZONE BUTTON 00 to 31
DISP ZONE DISP 00 to 31
2
3 Press MENU to exit.
Sound adjustments
This unit memorizes sound settings adjusted for each individual source.
Selecting the preset sound
You can select a preset sound mode, for each
individual source, suitable for the music genre.
— — — — — — — — or — — — — — — — —
Press repeatedly.
DYNAMIC-VOCAL BOOST-BASS BOOST-
USER-FLAT-NATURAL-(back to the beginning)
Storing your own adjustments
While listening, you can adjust and store the tone
level for each individual source.
Easy Equalizer
(Hold)
1
(Initial: [XX])
SUB.W* 00 to 08 [08]
BASS LVL** -06 to +06 [+05]
MID LVL -06 to +06 [00]
TRE LVL -06 to +06 [+05]
The adjustments are stored and <USER> is
activated.
2 Adjust the level.
Pro Equalizer
(Hold)
1
-<PRO EQ>
-<BASS>**/<MIDDLE>/
<TREBLE>
2
Adjust the sound elements of the selected tone.
BASS (Initial: [XX])
Frequency 60/80/[100]/200 Hz
Level LVL -06 to +06 [+05]
Q [Q1.0]/Q1.25/Q1.5/Q2.0
MIDDLE
Frequency 0.5/[1.0]/1.5/2.5 kHz
Level LVL -06 to +06 [00]
Q Q0.75/Q1.0/[Q1.25]
TREBLE
Frequency 10.0/[12.5]/15.0/17.5 kHz
Level LVL -06 to +06 [+05]
Q [Q FIX]
3
4 Repeat steps 2 and 3 to adjust other tones.
The adjustments are stored and <USER> is
activated.
5 Press MENU to exit.
* Available only when <L/O MODE> is set to
<SUB.W>. (‘ page 14)
** Available only when <HPF> is set to <OFF>.
(‘ page 14)
Brightness adjustments
Brightness adjustments
12 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 13

(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3 Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
Menu item Selectable setting (Initial: [XX])
DEMO For settings, ‘ page 3.
CLOCK
CLOCK SET
24H/12H
CLOCK ADJ *1
(Clock
adjustment)
[AUTO]: The built-in clock is synchronized with the clock data received
from the FM Radio Data System station.
OFF: Cancels.
COLOR For settings, ‘ page 11. (KD-X40 only)
COLOR SETUP
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *2
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
BRIGHTNESS *3 DAY/NIGHT: Brightness settings for the display and button illumination for
day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
DISPLAY
SCROLL *4 [ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
PRO EQ For settings, ‘ page 12.
*1 Takes effect only when clock data is received.
*2 The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*3 Initial:
KD-X40: DAY[31]/NIGHT[11]
KD-X30: DAY (BUTTON ZONE[25], DISP ZONE[31])/
NIGHT (BUTTON ZONE[9], DISP ZONE[12])
*4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Menu operations
Menu operations
ENGLISH‫|ޓ‬ 13
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 14

Menu item Selectable setting (Initial: [XX])
AUDIO
FADER *5*6 R06 — F06[00]: Adjusts the front and rear speaker output balance.
BALANCE *6 L06 — R06[00]: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05[00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W: Subwoofer
[REAR]: Speakers
SUB. W *7
(Subwoofer)
OFF: Cancels.
[ON]: Turns on the subwoofer output.
SUB.W LPF *8
(Subwoofer low-
pass filter)
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL *8
(Subwoofer level)
00 — 08[08]: Adjusts the subwoofer output level.
HPF *8
(High-pass filter)
ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]/OFF: Activates or deactivates the keypress tone.
TEL MUTING *9
(Telephone
muting)
ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]: Cancels.
AMP GAIN *10
(Amplifier gain)
LOW POWER: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]: VOLUME 00 — VOLUME 50
*5 If you are using a two-speaker system, set the fader level to “00”.
*6 This adjustment will not affect the subwoofer output.
*7 Displayed only when <L/O MODE> is set to <SUB.W>.
*8 Displayed only when <SUB.W> is set to <ON>.
*9 This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>.
*10 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>
with the volume level set to higher than “VOLUME 30”.
Menu operations
14 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 15

Menu item Selectable setting (Initial: [XX])
TUNER
SSM For settings, ‘ page 6. (Displayed only when the source is “FM”.)
AF-REG *11 For settings, ‘ page 7.
NEWS-STBY *11
(News standby)
ON/[OFF]: Activates or deactivates NEWS Standby Reception. (Displayed
only when the source is “FM”.) (‘ page 7)
P-SEARCH *11
(Programme
search)
SEARCH ON/[SEARCH OFF]:
Activates Programme Search (if <AF-REG> is set to <AF ON> or
<AF-REG ON>) or deactivates.
MONO
(Monaural mode)
Displayed only when the source is “FM”.
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER For settings, ‘ page 6.
IPOD SWITCH
(iPod/iPhone control)
[HEAD MODE]/IPOD MODE/EXT MODE:
For settings, ‘ page 9. (Displayed only when the source is “USB-IPOD”.)
(KD-X40 only)
SRC
SELECT
AM *12 [ON]/OFF: Enables or disables “AM” in source selection.
F-AUX *12
(Front auxiliary
input)
[ON]/OFF: Enables or disables “F-AUX” in source selection.
R-AUX *12
(Rear auxiliary
input)
ON/OFF: Enables or disables “R-AUX” in source selection.
[BT ADAPTER]: Select if the rear auxiliary input jack is connected to the
Bluetooth adapter, KS-BTA100 (‘ page 10). The source name will be
changed to “BT AUDIO”.
*11 Only for FM Radio Data System stations.
*12 Displayed only when the unit is in any source other than the corresponding source “AM/
F-AUX/R-AUX/BT AUDIO”.
Menu operations
ENGLISH‫|ޓ‬ 15
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 16

About audio files
Playable files
File extensions: MP3(.mp3), WMA(.wma)
Bit rate:
MP3: 8 kbps — 320 kbps
WMA: 32 kbps — 192 kbps
Sampling frequency:
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz,
22.05kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz
WMA: 48 kHz, 44.1 kHz, 32 kHz
Variable bit rate (VBR) files. (The elapsed time
for VBR files will not be displayed correctly.)
Unplayable files
MP3 files:
— encoded in MP3i and MP3 PRO format
— encoded in an inappropriate format
— encoded with Layer 1/2
WMA files:
— encoded in lossless, professional, and voice
format
— not based upon Windows Media® Audio
— copy-protected with DRM
Files which include data such as AIFF, ATRAC3,
etc.
Maximum number of characters
for file/folder name
Varies depending on the format used (includes 4
extension characters—<.mp3> or <.wma>).
ISO 9660 Level 1 and 2: 64 characters
Romeo: 64 characters
Joliet: 32 characters
Windows long file name: 64 characters
Others
This unit can show WMA Tag and ID3 Tag
Version 1.0/1.1/2.2/2.3/2.4 (for MP3).
The search function works but search speed is
not constant.
About USB device
When connecting a USB cable, use the USB 2.0
cable.
You cannot connect a computer or portable
HDD to the USB input terminal of the unit.
Connect only one USB device to the unit at a
time. Do not use a USB hub.
USB devices equipped with special functions
such as data security functions cannot be used
with the unit.
Do not use a USB device with 2 or more
partitions.
This unit cannot recognize a USB device whose
rating is other than 5 V and exceeds 1 A.
This unit may not recognize a memory card
inserted into the USB card reader.
This unit may not play back files in a USB
device properly when using a USB extension
cord.
Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
Operation and power supply may not work as
intended for some USB devices.
The maximum number of characters for:
– Folder names: 63 characters
– File names: 63 characters
– MP3 Tag: 60 characters
– WMA Tag: 60 characters
This unit can recognize a total of 65 025 files,
255 folders (255 files per folder including folder
without unsupported files), and of 8
hierarchies.
Cautions
Do not pull out and attach the USB device
repeatedly while “READING” is shown on the
display.
Electrostatic shock at connecting a USB device
may cause abnormal playback of the device. In
this case, disconnect the USB device then reset
this unit and the USB device.
Do not leave a USB device in the car, expose to
direct sunlight, or high temperature. Failure to
do so may result in deformation or cause
damages to the device.
Additional information
Additional information
16 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 17

About iPod/iPhone
iPod/iPhone that can be connected to this unit:
— iPod touch (4th generation)
— iPod touch (3rd generation)
— iPod touch (2nd generation)
— iPod touch (1st generation)
— iPod classic
— iPod with video (5th generation)*
— iPod nano (6th generation)
— iPod nano (5th generation)
— iPod nano (4th generation)
— iPod nano (3rd generation)
— iPod nano (2nd generation)
— iPod nano (1st generation)*
— iPhone 4
— iPhone 3GS
— iPhone 3G
— iPhone
*<IPOD MODE>/<EXT MODE> are not
applicable.
It is not possible to browse video files on the
“Videos” menu in <HEAD MODE>.
The song order displayed on the selection
menu of this unit may differ from that of the
iPod.
When operating an iPod/iPhone, some
operations may not be performed correctly or
as intended. In this case, visit the following JVC
website:
<http://www3.jvckenwood.com/english/car/
index.html> (English website only).
Trademark and license notice
Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod, or iPhone,
respectively, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note
that the use of this accessory with iPod, or
iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
Additional information
ENGLISH‫|ޓ‬ 17
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 18

Symptom Remedy/Cause
4 General
No sound, sound interrupted or
static noise.
Check the cords, aerial and cable connections.
Check the condition of the connected device and recorded
tracks.
“MISWIRING CHK WIRING THEN
RESET UNIT”/“WARNING CHK
WIRING THEN RESET UNIT”
appears on the display and no
operations can be done.
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (‘ page 2)
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
The unit does not work at all. Reset the unit. (‘ page 2)
Source cannot be selected. Check the <SRC SELECT> setting. (‘ page 15)
The correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
4 FM/AM
SSM automatic presetting does
not work.
Store stations manually.
4 USB/iPod/iPhone
“READING” keeps flashing on the
display.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Reattach the USB device.
Tracks/folders are not played
back in the order you have
intended.
The playback order is determined by the file name.
“NOT SUPPORT” appears on the
display and track skips.
Check whether the track is a playable file format.
“CANNOT PLAY” flashes on
the display.
The unit cannot detect the
connected device.
Check whether the connected device is compatible with this
unit. (USB: ‘ page 19) (iPod/iPhone: ‘ page 17)
Ensure that the device contains files in the supported
formats. (‘ page 16)
Reattach the device.
The iPod/iPhone does not turn
on or does not work. *
Check the connection between this unit and iPod/iPhone.
Detach and reset the iPod/iPhone using hard reset. For
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether <IPOD SWITCH> setting is appropriate.
(‘ page 9)
* For KD-X40 only.
Troubleshooting
Troubleshooting
18 |‫ޓ‬ENGLISH
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN

Page: 19

AUDIO AMPLIFIER SECTION
Maximum Power Output 50 W per channel
Continuous Power Output (RMS) 20 W per channel into 4Ω, 40 Hz to 20 000 Hz at
less than 1% total harmonic distortion.
Load Impedance 4Ω (4Ω to 8Ω allowance)
Frequency Response 40 Hz to 20 000 Hz
Signal-to-Noise Ratio 70 dB
Line-Out, Subwoofer-Out Level/Impedance 2.5 V/20 kΩ load (full scale)
Output Impedance ≤ 600Ω
TUNER SECTION
FM Frequency Range 87.5 MHz to 108.0 MHz
Usable Sensitivity 9.3 dBf (0.8 μV/75Ω)
50 dB Quieting Sensitivity 16.3 dBf (1.8 μV/75Ω)
Alternate Channel
Selectivity (400 kHz)
65 dB
Frequency Response 40 Hz to 15 000 Hz
Stereo Separation 40 dB
AM Frequency Range MW: 531 kHz to 1 611 kHz
LW: 153 kHz to 279 kHz
Sensitivity/Selectivity MW: 20 μV/40 dB, LW: 50 μV
USB SECTION
USB Standard USB 1.1, USB 2.0
Data Transfer Rate (Full Speed) Max. 12 Mbps
Compatible Device Mass storage class
Compatible File System FAT 32/16/12
Playable Audio Format MP3/WMA
Maximum Supply Current DC 5 V » 1 A
GENERAL
Power Requirement (Operating Voltage) DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Allowable Operating Temperature 0°C to +40°C
Dimensions
(W × H × D)
Installation Size approx. 182 mm × 52 mm × 158 mm
Panel Size approx. 188 mm × 59 mm × 15 mm
Mass 0.8 kJ (excluding accessories)
Subject to changes without notice.
Specifications
Specifications
ENGLISH‫|ޓ‬ 19
2011/11/8‫ޓ‬22:24:41
KD-X40_E_EN