-
Bookmarks
Quick Links
AC/DC CLAMP MULTIMETER
INSTRUCTION MANUAL
APPA 30R
Related Manuals for APPA 30R
Summary of Contents for APPA 30R
-
Page 1
AC/DC CLAMP MULTIMETER INSTRUCTION MANUAL APPA 30R… -
Page 2
Warning Safety sheet …….. -
Page 3
Symbols as marked on the meter and Instruction manual Risk of electric shock See instruction manual DC measurement Equipment protected by double or reinforced insulation < Battery Earth AC measurement Conforms to EU directives Application around and removal from hazardous live conductors is permitted Do not discard this product or throw away… -
Page 4
INTRODUCTION 1-1 Unpacking and Inspection Upon removing your new Digital Clamp Multimeter from its packing, you should have the following items: 1. Digital Clamp Multimeter. 2. Test lead set (one black, one red). 3. Carrying case. 4. Instruction manual. 5. Battery. -
Page 5
1-2 Front Panel Refer to Figure 1 and to the following numbered steps to familiarize yourself with the meter’s front panel controls and connectors. 1. Digital Display — The digital display has a 3 3/4 digit LCD readout (maximum reading 3999) plus decimal point , AC , DC , AUTO, HOLD, MAX , ;… -
Page 6
6. ZERO Switch —This switch is used to ZERO the reading on display. 7. Ω / ; AC/DC Selection Switch — Push the «Ω / ;, AC/DC» switch alternately to measure AC voltage or DC voltage in the » V H » function or to measure AC current or DC current in the » A H » function or to measure resistor or continuity in «… -
Page 7
Figure 1… -
Page 8: Specifications
SPECIFICATIONS 2-1 General Specifications Display : 3 3/4 Digital Liquid Crystal Display (LCD) with a maximum reading of 3999. Polarity Indication : Automatic polarity indicated. Over range Indication : “OL” indicated. Low Battery Indication : ““ is displayed when the battery voltage drops below operating voltage. Measuring Rate : 2 times/second normal.
-
Page 9
Max/Conductor Size : 22 mm diameter. Temperature Coefficient : 0.15 x ( spec.Acc’y ) / °C < 18°C or > 28°C . Size : 66 mm (W) x 192 mm (L) x 27 mm (H) . Weight : 205 grams (including battery) Accessories : Test leads, battery, manual and carrying case. -
Page 10
2-3 Electrical Specifications Accuracy is ± (% reading + number of digits) at 23°C ± 5°C at less than 80% R.H. (1) AC Voltage : Auto-ranging Over voltage Range Resolution Accuracy protection μ 400.0mV ±(2.0% rdg + 5dgt ) 50Hz ~ 60Hz * 4.000V ±(1.5% rdg + 5dgt ) 40Hz ~ 300Hz 600V rms… -
Page 11
LCD display 0 count when the reading ≦1mV AC Conversion Type : AC conversions are ac-coupled, true rms responding, calibrated to the rms value of a sine wave input . Accuracies are given for sine wave at full scale. For distorted signals, add the following Crest Factor corrections: For Crest Factor of 1.4 to 2.0, add 1.0% to accuracy. -
Page 12
(2) DC Voltage : Auto-ranging Over voltage Range Resolution Accuracy protection μ 400.0mV ±(0.5% rdg + 5 dgt) 4.000V 600V rms 40.00V 10mV ±(0.5% rdg + 2 dgt) 400.0V 100mV 600V Input Impedance : ≧ 10MΩ. -
Page 13
(3) Resistance Auto-ranging Overload Range Resolution Accuracy Protection 400.0Ω 100mΩ ±(1.2% rdg + 6 dgt) 4.000KΩ 1Ω ±(0.9% rdg +3 dgt) 40.00KΩ 10Ω 600V rms 400.0KΩ 100Ω ±(1.2% rdg + 3 dgt) 4.000MΩ 1KΩ 40.00MΩ 10KΩ ±(2.5% rdg + 5dgt) *1 *3… -
Page 14
* 1: The reading maybe rolling ≦ 6 digits when the reading is close to full scale. * 2: The reading maybe rolling ≦ 3 digits when the reading is close to full scale. * 3: The response time is approximate 20 seconds. * : Put a low resistor in the input terminal before slide the sliding function switch to resistor and continuity function maybe cause a buzzer sound. -
Page 15
(5) DCA : Auto-ranging Over voltage Range Resolution Accuracy protection 0 ~ 40.00A 10mA ±(1.0% rdg + 2 dgt) 40.0A ~ 200.0A 100mA 400A rms 200.0A ~ 300.0A 100mA ±(2.0% rdg + 2 dgt) For DCA & ACA : 1. Temperature Coefficient : 0.2 x (Spec.Acc’y) / °C < 20 °C or > 26°C . 2. -
Page 16
(6) ACA : Auto-ranging Frequency Overload Range Resolution Accuracy Response Protection 0 ~ 4.00A 10mA ±(1.0% rdg + 5 dgt) 4.00A ~ 40.00A 10mA 50Hz ~ 60Hz ±(1.0% rdg + 3 dgt) 40.0A ~ 200.0A 100mA 200.0A ~ 300.0A 100mA ±(3.0% rdg + 3 dgt) 400A r.m.s. -
Page 17
LCD display 0 count when the reading ≦0.1A AC Conversion Type : AC conversions are ac-coupled, true rms responding, calibrated to the rms value of a sine wave input . Accuracies are given for sine wave at full scale. For distorted signals, add the following Crest Factor corrections : For Crest Factor of 1.4 to 2.0, add 1.0% to accuracy. -
Page 18: Operation
OPERATION This instrument has been designed and tested in accordance with IEC 61010, Safety Requirements for Electronic Measuring Apparatus and has been supplied in a safe condition. This instruction manual contains some Information and warnings which have to be followed by the user to ensure safe operation and to retain the instrument in safe condition.
-
Page 19
THIS INSTRUMENT MUST NOT BE USED ON UNINSULATED CONDUCTORS AT A VOLTAGE GREATER THAN 600V ac/dc. 3-2 AC/DC Current Measurement 1. Set the slide switch at » A A » position. 2. Open Spring-loaded clamp by pressing trigger on left side of meter. 3. -
Page 20
Figure 2… -
Page 21
Figure 3… -
Page 22
3-3 AC/DC Voltage Measurement 1. Set the slide switch at » V A » position. 2. Connect the black test lead to the «COM» terminal on the bottom of the meter and the red test lead to the » V-Ω» terminal . You can now place the test probes on the conductors to make the measurement. 3. -
Page 23: Maintenance
MAINTENANCE WARNING : TO AVOID ELECTRICAL SHOCKS REMOVE TEST LEADS FROM INSTRUMENT BEFORE OPENING THE COVER. 4-1 General Maintenance 1. Repairs or servicing not covered in this manual should only be performed by qualified personal. 2. Periodically wipe the case with a dry cloth and detergent do not use abrasives or solvents. 4-2 Battery Installation or Replacement The meter is powered by two 1.5V alkaline battery.
-
Page 24
Screw Battery Cover Battery Figure 4… -
Page 25
APPA TECHNOLOGY CORP. 9F.119-1 Pao-Zong Rd., Shin-Tien, Taipai, 23115, Taiwan, R.O.C. P.O.Box. 12-24 Shin-Tien, Taiwan. Tel : 886-2-9178820 Fax : 886-2-9170848 E-MAIL:info @appatech.com http://www.appatech.com Printed In Taiwan Copright 2013, APPA Tech., Corp. All rights reserved.
Токоизмерительные клещи APPA 30, 30R; APPA 37
| Наименование | Краткое описание | Карточка товара |
||
|---|---|---|---|---|
| APPA 30R (APPA) |
|
— | — |
Скачать документацию: Документация на APPA 30R (525.9 Кб)
- Manuals
- Brands
- APPA Manuals
- Multimeter
- 30R