Kyocera fs c8520mfp инструкция на русском

Kyocera FS-C8520MFP / FS-C8525MFP инструкция по эксплуатации
(194 страницы)

• Page 1
  FS-C8520MFP FS-C8525MFP OPERATION GUIDE…
• Page 2
  Introduction Thank you for your purchase of FS-C8520MFP/FS-C8525MFP. This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition. Please read this Operation Guide before you start using the machine.
• Page 3
  Describes how to use functionality for printing PDF files without launching Adobe Guide Acrobat or Reader. KYOCERA Net Viewer User Guide Describes how to monitor the network printing system with KYOCERA Net Viewer. File Management Utility User Guide Describes how to distribute scanned documents over the network. PRESCRIBE Commands Technical Describes the native printer language (PRESCRIBE commands).

• Page 5: Table Of Contents

  Contents Preface …………………1-1 Notice ……………………… 1-2 Safety Conventions in This Guide …………….1-2 Environment ………………….. 1-3 Precautions for Use ………………..1-3 Legal Restriction on Copying/Scanning …………..1-8 Legal and Safety Information ………………..1-9 Legal Information ………………….. 1-9 Energy Saving Control Function …………….1-12 Automatic 2-Sided Copy Function …………….

• Page 6
  Checking the Equipment’s Serial Number …………….3-10 Checking the Counter ………………….3-11 Login/Logout ……………………3-12 Login ……………………3-12 Logout ……………………3-13 Favorites ……………………..3-14 Registering Favorites ………………..3-14 Editing and Deleting Favorites …………….. 3-18 Using Favorites ………………….3-20 Application …………………….. 3-21 Shortcuts ……………………..
• Page 7
  Interrupt Copy ……………………4-20 Printing …………………5-1 Printing from Applications ………………… 5-2 Printing Data Saved on the Printer ………………5-7 Private Print …………………… 5-7 Proof and Hold ………………….5-9 Automatic Delete Setting for Temporary Documents ……….5-12 Sending ………………..6-1 Basic Operation ……………………6-2 Preparation for Sending a Document to a PC …………..
• Page 8
  Checking Job History ………………….8-6 Sending the Log History ………………….. 8-7 Setting the Destination ………………..8-8 Automatic Log History Transmission …………….8-9 Manual Log History Transmission …………….8-9 Setting E-mail Subject ………………..8-10 Check of Device Status …………………. 8-11 Checking the Remaining Amount of Toner and Paper …………8-13 Setup, Registration, and User Management ………9-1 System Menu ……………………
• Page 9
  Solving Malfunctions ………………….10-8 Responding to Messages ………………..10-14 Clearing Paper Jams ………………….10-26 Jam Location Indicators ………………10-26 Multi Purpose Tray ………………..10-27 Inside the Right Cover 1 ………………10-27 Cassette 1 ………………….10-28 Inside the Right Cover 3 ………………10-28 Cassette 2 or 3 …………………..

• Page 11: Quick Guide

  Quick Guide Be sure to read Precautions for Use before using this machine. To make copies Simply press the Start key to make copies. You can also fine-tune the copy settings by changing the It copies. paper size, adjusting the density, etc. To print You can print via a network or print a PDF file directly from USB memory.

• Page 12
  To send documents You can send scanned images via a network. Or, you can also store scanned images in USB It sends. memory. Administrator tasks Saving What you want Send to Folder Send as E-mail Documents to to do (SMB) USB Memory Connecting Cables Plug the USB…
• Page 13
  To send a FAX As well as sending a FAX via the telephone lines, you can also send a FAX via a network. It faxes. NOTE For more information on setting up and sending a FAX, refer to the FAX Operation Guide. Administrator tasks What you want Send a FAX…

• Page 14: Menu Map

  Menu Map Copies (page 4-3) Paper Selection (page 3-42) Zoom (page 4-5) Density (page 3-51) Duplex (page 4-8) Combine (page 4-12) Collate/Offset (page 3-44) Functions Original Size (page 3-32) Original Orientation (page 3-34) Mixed Size Originals (page 3-35) Paper Output (page 3-43) Staple (page 3-49) Color Selection (page 3-60) Original Image (page 3-53)

• Page 15
  One Touch Key (page 6-19) Address Book (page 6-17) Ext. Address Book (refer to Command Center RX User Guide.) E-mail (page 6-20) Folder (page 6-21) FAX (refer to Fax Operation Guide) WSD Scan (page 6-45) Functions File Format (page 3-58) Original Size (page 3-32) Original Orientation (page 3-34) Mixed Size Originals (page 3-35)
• Page 16
  Job Box (page 5-7) Removable Menu Store File File Format (page 3-58) Memory 2-sided/Book Original (page 3-37) Scan Resolution (page 3-52) Density (page 3-51) File Name Entry (page 3-63) Functions Original Size (page 3-32) Original Orientation (page 3-34) Mixed Size Originals (page 3-35) Storing Size (page 7-15) Color Selection (page 3-60) Original Image (page 3-53)
• Page 17
  Print Job Status (page 8-3) Send Job Status (page 8-4) Store Job Status (page 8-5) Scheduled Job (page 8-5) Print Job Log (page 8-6) Send Job Log (page 8-6) Store Job Log (page 8-6) Scanner (page 8-11) Printer (page 8-12) FAX (page 8-12) Removable Memory (page 8-12) Toner Status (page 8-13)

• Page 18: Index

  Quick Setup Wizard FAX Setup (page 3-26) (page 3-26) Energy Saver Setup (page 3-26) Network Setup (page 3-26) Language (page 9-5) Report (page 9-5) Report Print (page 9-5) Status Page (page 9-5) Font List (page 9-5) Network Status (page 9-5) Service Status (page 9-6) Accounting Report (page 9-6) Sub Address Box List (refer to Fax Operation Guide)

• Page 19
  Cassette/MP Tray Cassette 1 (to 3) (page Paper Size (page 9-8) Settings (page 9-8) 9-8) Media Type (page 9-8) Multi Purpose Tray Paper Size (page 9-8) (page 9-8) Media Type (page 9-8) Common Settings Default Screen (page 9-9) (page 9-9) Sound (page 9-9) Buzzer (page 9-9) Volume (page 9-9)
• Page 20
  Function Defaults (page File Format (page 9-12) 9-12) Original Orientation (page 9-12) Collate/Offset (page 9-12) File Separation (page 9-12) Scan Resolution (page 9-12) Color Selection (Copy) (page 9-12) Color Select.(Send/Store) (page 9-12) Original Image (page 9-12) Background Density Adj. (page 9-12) EcoPrint (page 9-12) Prevent Bleed-through (page 9-12) FAX TX Resolution (refer to Fax Operation Guide)
• Page 21
  Copy (page 9-15) Auto Paper Selection (page 9-15) Auto % Priority (page 9-15) Reserve Next Priority (page 9-15) Auto Image Rotation Action (page 9-15) Send (page 9-16) Dest. Check before Send (page 9-16) Entry Check for New Dest. (page 9-16) Send and Forward Forward (page 9-16) (page 9-16)
• Page 22
  User Login/Job User Login Settings User Login (page 9-36) Accounting (page 9-34) Local User List (page 9-38) Simple login settings Simple Login (page 9-47) (page 9-47) Simple Login Setup (page 9-47) Local User Authorization (page 9-42) Group Authorization Group Authorization (page 9-53) Set.
• Page 23
  System (page 9-19) Network (page 9-19) Host Name (page 9-19) TCP/IP (page 9-19) TCP/IP (page 9-19) IPv4 Settings (page 9-19) IPv6 Settings (page 9-20) Protocol Detail (page 9-21) WSD Scan (page 9-22) WSD Print (page 9-22) Enhanced WSD (page 9-22) Enhanced WSD (SSL) (page 9-22) IPSec (page 9-22) Secure Protocol (page…
• Page 24
  Date/Timer (page 9-24) Date/Time (page 9-24) Date Format (page 9-24) Time Zone (page 9-24) Auto Panel Reset (page 9-24) Panel Reset Timer (page 9-24) Low Power Timer (page 9-24) Auto Sleep (page 9-24) Sleep Level (page 9-25) Sleep Timer (page 9-25) Auto Error Clear (page 9-25) Error Clear Timer (page 9-25) Interrupt Clear Timer (page 9-25)

• Page 25: Preface

  Preface This chapter explains the following topics: Notice …………………………… 1-2 Safety Conventions in This Guide ………………….1-2 Environment ……………………….. 1-3 Precautions for Use ……………………..1-3 Legal and Safety Information ……………………..1-9 Legal Information ……………………….. 1-9 Energy Saving Control Function ………………….1-12 Automatic 2-Sided Copy Function ………………….

• Page 26: Notice

  Preface > Notice Notice Safety Conventions in This Guide The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and their meanings are indicated below.

• Page 27: Environment

  Preface > Notice Environment The service environmental conditions are as follows: • Temperature: 50 to 90.5 °F (10 to 32.5 °C) • Humidity: 15 to 80 % However, adverse environmental conditions may affect the image quality. It is recommended to use the machine at a temperature: around 60.8 to 80.6 °F or less (16 to 27 °C), humidity: around 36 to 65%.

• Page 28
  Preface > Notice Laser Safety (Europe) Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no radiation can leak from the machine.

• Page 29: Safety Of Laser Beam

  Preface > Notice SAFETY OF LASER BEAM (USA) 1. Safety of laser beam This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance.

• Page 30
  Preface > Notice Safety Instructions Regarding the Disconnection of Power Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension.
• Page 31
  Authorized Kyocera Dealer from whom the product was purchased. If the Kyocera Dealer is not able to provide service, write to Kyocera at the address below for the name and address of the Authorized Kyocera Dealer in your area, or check Kyocera’s website at http://www.kyoceradocumentsolutions.com.

• Page 32: Legal Restriction On Copying/Scanning

  Preface > Notice Legal Restriction on Copying/Scanning It may be prohibited to copy/scan copyrighted material without permission of the copyright owner. Copying/Scanning the following items is prohibited and may be penalized by low. It may not be limited to these items. Do not knowingly copy/scan the items that are not to be copied/scanned.

• Page 33: Legal And Safety Information

  Preface > Legal and Safety Information Legal and Safety Information Legal Information Copying or other reproduction of all or part of this guide without the prior written consent of KYOCERA Document Solutions Inc. is prohibited. Regarding Trade Names • PRESCRIBE and ECOSYS are trademarks of Kyocera Corporation.

• Page 34: Original Ssleay License

  Preface > Legal and Safety Information Open SSL License Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

• Page 35: Monotype Imaging License Agreement

  Preface > Legal and Safety Information 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

• Page 36: Energy Saving Control Function

  Preface > Legal and Safety Information 12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party.

• Page 37: Energy Star (Energy Star®) Program

  Preface > Legal and Safety Information ® Energy Star (ENERGY STAR ) Program We have determined as a participating company in the International Energy Star Program that this product is compliant with the standards laid out in the International Energy Star Program. ®…

• Page 38: About This Operation Guide

  Preface > About this Operation Guide About this Operation Guide This Operation Guide contains the following chapters. Chapter Contents Preface Includes information about operating precautions, trademarks, and this manual. Preparation before Use Provides information about part names, connecting cables, and setting up and configuring the machine.

• Page 39: Print Screen

  Preface > About this Operation Guide Job types for which each function can be set are shown with icons. Icon Description Icon Description This function can be set while copying a This function can be set while printing from USB document.

• Page 40: Originals And Paper Sizes

  Preface > About this Operation Guide Originals and Paper Sizes This section explains the notation used in this guide when referring to sizes of originals or paper sizes. As with A4, B5 and Letter, which may be used either in the horizontal or vertical direction, horizontal direction is indicated by an additional letter R in order to indicate the orientation of the original/paper.

• Page 41: Preparation Before Use

  Preparation before This chapter explains the following topics: Part Names ………………………….. 2-2 Machine …………………………2-2 Operation Panel ……………………….2-6 Touch Panel ……………………….. 2-7 Determining the Connection Method and Preparing Cables …………….2-8 Connection Example ……………………..2-8 Preparing Necessary Cables ……………………2-9 Connecting Cables ……………………….

• Page 42: Part Names

  Preparation before Use > Part Names Part Names Machine 1 Document Processor 2 Platen 3 Original Size Indicator Plates 4 Slit Glass 5 Operation Panel 6 Inner Tray 7 Front Cover 8 Cassette 1 9 USB Memory Slot (A1) 10 Right Cover 1 11 Handles 12 Job Separator Tray…

• Page 43
  Preparation before Use > Part Names 13 Original Width Guides 14 Original Table 15 Cleaning Cloth Compartment 16 Original Loaded Indicator 17 Toner Container (Black) 18 Toner Container (Magenta) 19 Toner Container (Cyan) 20 Toner Container (Yellow) 21 Waste Toner Box 22 Paper Width Guide 23 Paper Length Guide 24 Multi Purpose Tray…
• Page 44
  Preparation before Use > Part Names 26 Option Interface Slot 2 27 Network Interface Connector 28 USB Interface Connector (A2) 29 USB Port (B1) 30 Option Interface Slot 1 31 Scanner Lock 32 Main Power Switch 33 Handles 34 Cassette Heater Switch…
• Page 45
  Preparation before Use > Part Names 38 39 35 Top Cover 36 Tray Extension 37 Document Finisher Tray 38 Staple Cover 39 Staple Cartridge Holder 40 Bridge Unit Cover…

• Page 46: Operation Panel

  Preparation before Use > Part Names Operation Panel Displays the System Menu/Counter Displays the Interrupt Copy screen. screen. Displays the Status/Job Displays the Copy screen. Ends operation (logs out) on Cancel screen. the Administration screen. Displays the Favorites / Displays the screen for Puts the machine into Low Application screen.

• Page 47: Touch Panel

  Preparation before Use > Part Names Touch Panel Displays the status of the Displays the time and number of Ready to copy. (Full Color) 10:10 equipment as well as necessary Copy Copies copies. operation messages. Paper Zoom Density Selection Auto 100% Normal 0 Displays available functions.

• Page 48: Determining The Connection Method And Preparing Cables

  Preparation before Use > Determining the Connection Method and Preparing Cables Determining the Connection Method and Preparing Cables Check the method to connect the equipment to a PC or network, and prepare the necessary cables for your environment. Connection Example Determine the method to connect the equipment to a PC or network by referring to the illustration below.

• Page 49: Preparing Necessary Cables

  Preparation before Use > Determining the Connection Method and Preparing Cables Preparing Necessary Cables Prepare the necessary cables according to the interface you use. Connection Environment Function Necessary Cable Connect a LAN cable to the machine. Printer/Scanner/Scanner (TWAIN/WIA) LAN (10Base-T, 100Base-TX, or 1000BASE-T Shielded) Connect a USB cable to the machine.

• Page 50: Connecting Cables

  Preparation before Use > Connecting Cables Connecting Cables Connecting LAN Cable The equipment can be connected with a network cable and used as a network printer or network scanner. Power Off. Check that the indicators are off. Connect the machine. Connect the LAN cable to the network interface located on left side of the body.

• Page 51: Connecting Usb Cable

  Preparation before Use > Connecting Cables Connecting USB Cable The equipment can be connected with a USB cable and used as a printer in an environment where there is no network. Power Off. Check that the indicators are off. Connect the machine. Connect the USB cable to the appropriate interface located on the left side of the body.

• Page 52: Power On/Off

  Preparation before Use > Power On/Off Power On/Off Power On When the main power indicator is lit… (Recovery from sleep) Main Power indicator Press the Power key. When the main power indicator is off… Turn the main power switch on. IMPORTANT When turning off the main power switch, do not turn on the main power switch again immediately.

• Page 53
  Preparation before Use > Power On/Off When turning off the main power switch Note that when the main power switch is turned off, the machine will be unable to automatically receive print data from computers or faxes. Press the Power key. Main Power indicator Check that the indicators are off.

• Page 54: Installing Software

  Utility This makes it possible to send and save a scanned — document to a specified network folder. Utility ○ KYOCERA Net This makes it possible to print a PDF file without starting — Adobe Acrobat/Reader. Direct Print ○ KYOCERA Net This is a utility that enables monitoring of the machine on —…

• Page 55: Installing Printer Driver In Windows

  Preparation before Use > Installing Software NOTE Installation on Windows must be done by a user logged on with administrator privileges. Plug and Play is disabled on this device when in Sleep. Wake the device from Low Power Mode or Sleep before continuing.

• Page 56: Finish The Installation

  Preparation before Use > Installing Software Install using Express Mode. Select the print system to be installed. If the machine is set to acquire an IP address automatically, select the “Use host name for port name” checkbox. Customize the print system name if the print system is connected via a network. Start installing.

• Page 57: Uninstalling The Software

  Uninstallation on Windows must be done by a user logged on with administrator privileges. Display the screen. Click on the Start in the Task Bar and then select All Programs, Kyocera, and Uninstall Kyocera Product Library to display the Uninstall Wizard.

• Page 58: Installing Printer Driver In Macintosh

  If connecting by Bonjour, enable Bonjour in the machine’s network settings. For details, refer to Network on page 9-19 In the Authenticate screen, enter the name and password used to log in to the operating system. Insert the DVD. Double-click the Kyocera icon. Display the screen. Double-click Double-click Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS X 10.5 or higher…

• Page 59: Configure The Printer

  Preparation before Use > Installing Software Configure the printer. Display the window. Click the IP icon for an IP connection and then enter the IP address and printer name. The number entered in «Address» will automatically appear in «Name». Change if needed. Select the options available for the machine and click Continue.

• Page 60: Setting Twain Driver

  Preparation before Use > Installing Software Setting TWAIN Driver Register this machine to the TWAIN Driver. Display the screen. Select Start button of the Windows display, All Programs, Kyocera and then TWAIN Driver Setting. TWAIN Driver screen appears. Click Add. Configure TWAIN Driver.

• Page 61: Setting Wia Driver

  Preparation before Use > Installing Software Setting WIA Driver Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7. Display the screen. Click the Windows Start button and enter Scanner in Program and File Search. Click View scanners and cameras in the search list.

• Page 62: Energy Saver Function

  Preparation before Use > Energy Saver function Energy Saver function Low Power Mode and Auto Low Power Mode Low Power Mode To activate Low Power Mode, press the Energy Saver key. Touch panel and all indicators on the operation panel will go out to save power except the Energy Saver, Power, and Main Power indicators.

• Page 63: Sleep And Auto Sleep

  Preparation before Use > Energy Saver function Sleep and Auto Sleep Sleep To enter Sleep, press the Power key. Touch panel and all indicators on the operation panel will go out to save a maximum amount of power except the Main Power indicator. This status is referred to as Sleep.

• Page 64: Machine Setup Wizard

  Preparation before Use > Machine Setup Wizard Machine Setup Wizard The Machine Setup Wizard is launched when the equipment is turned on for the first time after being installed. System Menu/Counter. 10:10 Machine setup 1. Date/Time 2. Network This wizard will help you set up your machine.

• Page 65: Command Center Rx (Settings For E-Mail)

  Preparation before Use > Command Center RX (Settings for E-mail) Command Center RX (Settings for E-mail) Command Center RX is a tool used for tasks such as verifying the operating status of the machine and changing the settings for security, network printing, E-mail transmission and advanced networking. This section explains how to access Command Center RX and configure e-mail settings.

• Page 66: Sending E-Mail

  Preparation before Use > Command Center RX (Settings for E-mail) Sending E-mail Specifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments. To use this function, this machine must be connected to a mail server using the SMTP protocol. Before sending images loaded onto this machine as E-mail attachments, check the following: •…

• Page 67
  Preparation before Use > Command Center RX (Settings for E-mail) Item Description Login Password When Other is selected for Authenticate, the password set here will be used for authentication. The maximum length of the login password is 64 characters. SMTP Security Enables or disables the SMTP Security.
• Page 68
  Preparation before Use > Command Center RX (Settings for E-mail) 2-28…

• Page 69: Common Operations

  Common Operations This chapter explains the following topics: Loading Paper …………………………3-2 Before Loading Paper ……………………..3-2 Loading Paper in the Cassettes ………………….. 3-3 Loading Paper in the Multi Purpose Tray ………………..3-5 Loading Originals …………………………. 3-7 Placing Originals on the Platen …………………… 3-7 Loading Originals in the Document Processor ………………

• Page 70: Loading Paper

  Common Operations > Loading Paper Loading Paper Paper can be loaded standardly in the cassette and the multi purpose tray. A paper feeder is also available as an option (refer to Optional Equipment on page 11-2). Before Loading Paper When you open a new package of paper, fan the sheets to separate them slightly prior to loading in the following steps. Bend the whole set of sheets to swell them in the middle.

• Page 71: Loading Paper In The Cassettes

  Common Operations > Loading Paper Loading Paper in the Cassettes The standard cassette will each hold plain paper, recycled paper or color paper. The standard cassette holds up to 500 sheets of plain paper (80 g/m²). The following paper sizes are supported: Ledger, Letter-R, Letter, Legal, Statement-R, Oficio II, A3, B4, A4, A4-R, A5-R, B5, B5-R, Folio, 216 ×…

• Page 72: Load Paper

  Common Operations > Loading Paper Load paper. IMPORTANT Load the paper with the print side facing up. Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams. Ensure that the loaded paper does not exceed the level indicator (see the figure).

• Page 73: Loading Paper In The Multi Purpose Tray

  Common Operations > Loading Paper Loading Paper in the Multi Purpose Tray The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m²) or up to 25 sheets of plain paper (80 g/m²) lager than A4. The multi purpose tray accepts paper sizes from A3 to A6 and Hagaki and from Ledger to Statement-R, 8K, 16K-R and 16K.

• Page 74
  Common Operations > Loading Paper Load paper. Insert the paper along the paper width guides into the tray until it stops. IMPORTANT Load the paper with the print side facing down. Curled paper must be uncurled before use. Straighten the top edge if it is curled. When loading paper into the multi purpose tray, check that there is no paper left over in the tray from a previous job before loading the paper.

• Page 75: Loading Originals

  Common Operations > Loading Originals Loading Originals Placing Originals on the Platen You may place books or magazines on the platen in addition to ordinary sheet originals. NOTE Before opening the document processor, be sure that there are no originals left on the original table or on the original eject table.

• Page 76: Loading Originals In The Document Processor

  Common Operations > Loading Originals Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. Originals Supported by the Document Processor Weight 45 to 160 g/m² (duplex: 50 to 120 g/m²) Size Maximum A3 to Minimum A5-R Maximum Ledger to Minimum Statement-R…

• Page 77: Load Originals

  Common Operations > Loading Originals Load Originals. With the side to be scanned face up, insert the leading edge of the original all the way into the document processor. If the original is two-sided, insert with the front side face up. IMPORTANT Ensure that loaded originals do not exceed the level indicator.

• Page 78: Checking The Equipment’s Serial Number

  Common Operations > Checking the Equipment’s Serial Number Checking the Equipment’s Serial Number The equipment’s serial number is printed in the location shown in the figure. XXXXXXXXX XXXXXXXXX NOTE You’ll need the equipment’s serial number when contacting your Service Representative. Please check the number before contacting your Service Representative.

• Page 79: Checking The Counter

  Common Operations > Checking the Counter Checking the Counter Check the number of pages printed and scanned. Display the screen. System Menu/Counter. 10:10 System Menu Quick Setup Wizard Language Report Counter Use [ ] or [ ] to scroll up and down. Check the counter.

• Page 80: Login/Logout

  Common Operations > Login/Logout Login/Logout If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter your login user name and login password. NOTE The factory default login user name and login password are set as shown below. Model Name Login User Name Login Password…

• Page 81: Logout

  Common Operations > Login/Logout Log in. Enter login user name and password. 10:10 Login User Name Keyboard 2500 Login Password Keyboard **** Menu Login NOTE If Network Authentication is selected as the user authentication method, either Local or Network can be selected as the authentication destination. Simple Login Select the user to login.

• Page 82: Favorites

  Common Operations > Favorites Favorites Frequently used functions can be registered as favorites so that they can be called up easily. The following functions are pre-registered on this machine. You can delete these functions as well as register new functions. The functions created by the external software, such as File Management Utility, are also displayed here. •…

• Page 83
  Common Operations > Favorites NOTE Press [Favorites] in the Application screen to return to the Favorites screen. Favorites Select the job type. Select the job type. 10:10 Select how to recall the function. 10:10 Add — Job Type Add — Function Type Copy Program Send…

• Page 84: Check The Settings

  Common Operations > Favorites Check the settings. Check the settings and change or add information as needed. [Name] Select the item that you want to change. 10:10 Name Add — Confirmation Input: E-mail Limit: Name Sending Job — E-mail Del. Job Type Multi Sending Number…

• Page 85
  Common Operations > Favorites [Function Type] Select the item that you want to change. 10:10 10:10 Add — Confirmation Function Type Permission Private Program Destination Address Book Wizard Functions Function Type Wizard Cancel < Back Save Cancel Register the favorite. Select the item that you want to change.

• Page 86: Editing And Deleting Favorites

  Common Operations > Favorites Editing and Deleting Favorites This section describes how to edit name and permission of the registered favorites and how to delete favorites. Display the screen. Select the function. 10:10 Favorites ID Card Copy Paper Saving Copy Scan to PC (Address Entry) Scan to PC…

• Page 87
  Common Operations > Favorites [Permission] 10:10 Document Box. 10:10 Favorites:E-mail TX Permission Permission Shared Private Destination Address Book Shared Functions Function Type Wizard Cancel < Back Save Cancel Configures permission settings for favorites to determine how they are shared with other users. Register the favorite.

• Page 88: Using Favorites

  Common Operations > Favorites Using Favorites Call up settings from a favorite. Display the screen. Select a favorite. Select the function. 10:10 Favorites ID Card Copy Paper Saving Copy Scan to PC (Address Entry) Scan to PC Scan to E-mail Scan to E-mail (Address Book) (Address Entry)

• Page 89: Application

  Common Operations > Application Application The functionality of the machine can be expanded by installing applications. Applications that help you perform your daily more efficiently such as a scan feature and an authentication feature are available. For details, consult your sales representative or dealer. For application settings, refer to Favorites/Application on page 9-16.

• Page 90: Shortcuts

  Common Operations > Shortcuts Shortcuts Frequently used function screens can be registered as shortcuts so that they can be called up easily. Registering Shortcuts You can register up to 2 shortcuts for copying functions, sending functions, and functions set for document box. The following types of shortcuts are available: Private Shortcut Private shortcuts are only available for use by the logged in user.

• Page 91
  Common Operations > Shortcuts Select the function. Select the functions. 10:10 Add — Functions Paper Selection Zoom Density Duplex Cancel < Back Next > Select the function screen to display with the shortcut. Enter the shortcut name. Add — Name Input: Shortcut 1 Limit:…

• Page 92: Editing And Deleting Shortcuts

  Common Operations > Shortcuts Editing and Deleting Shortcuts Change shortcut number/name or delete shortcut. Display the screen. Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) 10:10 Copy Copies Functions Original Size Auto Paper Zoom Density Selection Original Orientation Auto 100% Normal 0…

• Page 93: Using Shortcuts

  Common Operations > Shortcuts Register the shortcut. 10:10 Edit — Confirmation Number Shortcut 1 Name Shortcut 1 Functions Zoom Cancel < Back Save To delete 10:10 10:10 Add/Edit Shortcut Delete Private Shortcut 1 Edit Private Shortcut 2 Delete Shared Shortcut 1 Shared Shortcut 2 Close Cancel…

• Page 94: Quick Setup Wizard

  Common Operations > Quick Setup Wizard Quick Setup Wizard Make the following basic settings as instructed by the Wizard: Energy Saver Setup Configures sleep mode and low-power mode. 1. Sleep Mode Sleep Mode — Auto Sleep, Sleep Mode — Sleep Timer, Sleep Mode — Sleep Level 2.

• Page 95
  Common Operations > Quick Setup Wizard Select a function. System Menu/Counter. 10:10 Quick Setup Wizard FAX Setup Energy Saver Setup Network Setup < Back Configure the function. 10:10 System Menu/Counter. FAX Setup 1. Dialing/RX Mode 2. Local FAX Info. 3. Sound Volume 4.

• Page 96: Help Screen

  Common Operations > Help Screen Help Screen If you have difficulty operating the machine, you can check how to operate it using the touch panel. When the [?] (help) is displayed on the touch panel, you can press it to display the Help screen. Ready to copy.

• Page 97: Canceling Jobs

  Common Operations > Canceling Jobs Canceling Jobs Cancel any print or send job being executed. Press the Stop key. Cancel a job. When there is a job is being scanned Canceling… 10:10 Job No.: 0001 Job Name: doc00000120101010101010 Scanned Pages Cancel Canceling……

• Page 98: Using Various Functions

  Common Operations > Using Various Functions Using Various Functions This section describes common functionality that can be configured for copying, sending, and the document box. Display the screen. Press the key of each function. When using USB memory, plug it into the USB memory slot (A1). Press [Yes] on the displayed screen.

• Page 99: Common Functionality

  Common Operations > Using Various Functions Common Functionality Functionality related to originals What do you want to do? Reference Page  Specify the original size. Original Size page 3-32 Specify the original orientation to scan in the correct direction. Original Orientation …

• Page 100: Original Size

  Common Operations > Using Various Functions Original Size Scan to Copy Send Specify the original size to be scanned. Auto Automatically detects the size of the original. Metric Select from A3, A4-R, A4, A5-R, A5, A6-R, B4, B5-R, B5, B6-R, B6, Folio, or 216 × 340 mm. Inch Select from Ledger, Letter-R, Letter, Legal, Statement-R, Statement, 11 ×…

• Page 101
  Common Operations > Using Various Functions [Metric], [Inch], or [Others] Ready to copy. (Full Color) Ready to copy. (Full Color) 10:10 10:10 Original Size Original Size — Metric Auto Metric Inch Others Size Entry Cancel Cancel < Back Use [ ] or [ ] to scroll up and down.

• Page 102: Original Orientation

  Common Operations > Using Various Functions Original Orientation Scan to Copy Send Select the orientation of the original document top edge to scan correct direction. To use any of the following functions, the document’s original orientation must be set. • Duplex •…

• Page 103: Mixed Size Originals

  Common Operations > Using Various Functions Mixed Size Originals Scan to Copy Send Scans all sheets in the document processor, even if they are of different sizes. Supported Combinations of Originals • B4 and B5 • Ledger and Letter (A3 and A4) •…

• Page 104
  Common Operations > Using Various Functions Select the function. Ready to copy. (Full Color) 10:10 Mixed Size Originals Cancel 3-36…

• Page 105: 2-Sided/Book Original

  Common Operations > Using Various Functions 2-sided/Book Original Scan to Send Select the type and orientation of the binding based on the original. 1-sided Set when using a 1-sided sheet original. 2-sided Set when using a 2-sided sheet original that will be bound on the left or right.

• Page 106: 2-Sided/Book Original

  Common Operations > Using Various Functions Display the screen. Referring to Using Various Functions on page 3-30, display the screen. Send Ready to send. 10:10 10:10 Ready to send. Send Dest. : Functions 2-sided/Book Original Check Recall 1-sided Sending Size Same as Original Size One Touch Key Address Book…

• Page 107
  Common Operations > Using Various Functions Select the type of original. Ready to send. 10:10 Ready to send. 10:10 2-sided/Book Original — Others 2-sided/Book Original — 2-sided/Book Original 2-sided/Book Original 1-sided 1-sided 2-sided (Binding Left/Right) 2-sided (Binding Top) Book (Binding Left) Cancel <…

• Page 108: Continuous Scan

  Common Operations > Using Various Functions Continuous Scan Scan to Copy Send Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned continuously until you press [Finish Scan]. Display the screen. Referring to Using Various Functions on page 3-30, display the screen.

• Page 109
  Common Operations > Using Various Functions Finish scanning. Place the originals and press Start key. 10:10 Job No.:0003 Job Name:doc00000320101010101010 Scanned Pages Cancel Finish Scan Start copying, sending, or storing. 3-41…

• Page 110: Paper Selection

  Common Operations > Using Various Functions Paper Selection Print from Copy Select the cassette or multi-purpose tray that contains the required paper size. NOTE Specify in advance the size and type of the paper loaded in the cassette (refer to Cassette/MP Tray Settings on page 9-8).

• Page 111: Paper Output

  Common Operations > Using Various Functions Paper Output Print from Copy Set paper output to document finisher or job separator tray. Inner Tray* Places pages face down in the inner tray. Finisher Tray* Places pages face down in the optional document finisher tray. Job Separator Tray Places pages face down in the job separator tray.

• Page 112: Collate/Offset

  Common Operations > Using Various Functions Collate/Offset Print from Copy Offset the output by page or set. Collate Scan multiple originals and deliver complete sets of copies as required according to page number. Offset Without Document Finisher (Option) When you use offsetting, printed copies are produced after rotating each set (or page) by 90°. NOTE To offset without a document finisher, load the same size paper into a second paper source with a different orientation.

• Page 113
  Common Operations > Using Various Functions Display the screen. Referring to Using Various Functions on page 3-30, display the screen. Press [Collate/Offset]. Ready to copy. (Full Color) 10:10 Copy Copies Paper Zoom Density Selection Auto 100% Normal 0 Duplex Combine Collate/ Offset 1-sided>>1-sided…

• Page 114: Margin

  Common Operations > Using Various Functions Margin Print from Copy Add margins (white space). In addition, you can set the margin width and the back page margin. Margin Width Input units Margin Width Inch Models -0.75 to 0.75″ (in 0.01″ increments) Metric Models -18 mm to 18 mm (in 1-mm increments) Margin on the Back Side…

• Page 115
  Common Operations > Using Various Functions Enter the margin width. Ready to copy. (Full Color) 10:10 Margin Cancel Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) 10:10 Margin — Settings Margin — Margin Margin Left: 6mm L/R(-18 — +18) T/B(-18 — +18) Back Page Same as Front Page…
• Page 116
  Common Operations > Using Various Functions [Manual] Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) 10:10 Margin — Back Page Margin — Back Page Auto L/R(-18 — +18) T/B(-18 — +18) Manual Cancel Cancel < Back Press the text box and use [-]/[+] to enter a value. Select the original orientation.

• Page 117: Staple

  Common Operations > Using Various Functions Staple Print from Copy Staple documents. In addition, you can specify the staple position. NOTE Stapling requires the document finisher. The following stapling options and orientations are available. Original Orientation: Original Orientation: Top Edge (Back Edge) Left Top Edge (Left top corner) Cassette Paper Load Direction…

• Page 118
  Common Operations > Using Various Functions Select the staple position. [1 staple] or [2 staples] Ready to copy. (Full Color) 10:10 Staple 1 staple 2 staples 2 staples Others Cancel [Others] Ready to copy. (Full Color) 10:10 Staple 1 staple 2 staples 2 staples Others…

• Page 119: Density

  Common Operations > Using Various Functions Density Scan to Copy Send Adjust density using 7 levels. Display the screen. Referring to Using Various Functions on page 3-30, display the screen. Copy Scan to USB Ready to copy. (Full Color) 10:10 Ready to store in Box.

• Page 120: Scan Resolution

  Common Operations > Using Various Functions Scan Resolution Scan to Send Select fineness of scanning resolution. The selectable resolution is [200x100dpi Normal], [200×200dpi Fine], [200×400dpi Super], [300×300dpi], [400×400dpi Ultra], or [600×600dpi]. NOTE The larger the number, the better the image resolution. However, better resolution also means larger file sizes and longer send times.

• Page 121: Original Image

  Common Operations > Using Various Functions Original Image Scan to Copy Send Select original image type for best results. Text+Photo Best for originals which contain a mixture of text and photos. Photo Best for photographs. Text Sharply renders pencil text and fine lines. Graphic/Map* Best for graphics and maps.

• Page 122: Sharpness

  Common Operations > Using Various Functions Sharpness Scan to Copy Send Adjust the sharpness of the image. When copying penciled originals with rough or broken lines, clear copies can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such as magazine photos, in which moire* patterns appear, edge softening and weakening of the moire effect can be obtained by setting the sharpness toward [Blur].

• Page 123: Background Density Adjust

  Common Operations > Using Various Functions Background Density Adjust Scan to Copy Send Remove dark background from originals, such as newspapers. This feature is used with full color and auto color. Background Density Adjust is disabled if Auto Color detects black and white originals.

• Page 124: Prevent Bleed-Through

  Common Operations > Using Various Functions Prevent Bleed-through Scan to Copy Send Hide background colors and image bleed-through when scanning thin original. Display the screen. Referring to Using Various Functions on page 3-30, display the screen. Press [Functions] and then [Prevent Bleed-through]. Ready to copy.

• Page 125: Zoom

  Common Operations > Using Various Functions Zoom Scan to Send Reduce or enlarge original to send or store size. 100% Reproduces the original size. Auto Adjust the image to match the send or store size. NOTE Select Sending / Storing Size, when you reduce or enlarge original. Refer to Sending Size on page 6-40 and Storing Size on page 7-15.

• Page 126: File Format

  Common Operations > Using Various Functions File Format Scan to Send Specify the image file format. In addition, you can adjust the image quality level. Saves or sends a PDF file. You can specify the format that comply with PDF/A. TIFF Saves or sends a TIFF file.

• Page 127
  Common Operations > Using Various Functions Select the file format. [PDF], [TIFF], [JPEG], or [XPS] Ready to send. 10:10 File Format TIFF JPEG Others Cancel [Others] Ready to send. 10:10 File Format TIFF JPEG Others Cancel Next > Select the file format. Ready to send.

• Page 128: Color Selection

  Common Operations > Using Various Functions Color Selection Scan to Print from Copy Send Select the color mode setting. Auto Color* Automatically recognizes whether a document is color or black and white, and then scans the document. Auto (Color/Gray)** Automatically detects whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Grayscale.

• Page 129: Job Finish Notice

  Common Operations > Using Various Functions Job Finish Notice Scan to Print from Copy Send Send e-mail notice when a job is complete. User can be notified of the completion of a copy job while working at a remote desk, saving the time spent waiting beside the machine for copying to finish.

• Page 130
  Common Operations > Using Various Functions Select the e-mail address from an external address book. Ready to copy. (Full Color) 10:10 Job Finish Notice — Settings Address Book Ext. Address Book Address Entry My Address Cancel Next > For details on the External Address Book, refer to Command Center RX User Guide. Enter the e-mail address directly.

• Page 131: File Name Entry

  Common Operations > Using Various Functions File Name Entry Scan to Copy Send Add a file name. Additional information such as Job No. and Date and Time can also be set. You can check a job history or job status using the job name, date and time, or job number specified here.

• Page 132: Priority Override

  Common Operations > Using Various Functions Priority Override Print from Copy Suspend the current job and give a new job top priority. The suspended job resumes after the other job is finished. NOTE This function is not available if current job was an override. Priority override may not be available depending on the status of the current print job and memory usage.

• Page 133: Copying

  Copying This chapter explains the following topics: Basic Operation …………………………4-2 Copying Functions ……………………….. 4-4 Zoom ………………………….. 4-5 Duplex …………………………4-8 Combine …………………………4-12 EcoPrint …………………………4-15 Hue Adjustment ……………………….. 4-16 Color Balance ……………………….4-17 Saturation ………………………… 4-18 Auto Image Rotation ……………………..4-19 Interrupt Copy …………………………

• Page 134: Basic Operation

  Copying > Basic Operation Basic Operation Press the Copy key NOTE If the touch panel is turned off, press the Energy Saver key or the Power key and wait for the machine to warm up. Place the originals For details, refer to Loading Originals on page 3-7. Selecting color mode Auto Color Automatically recognizes whether a document is…

• Page 135: Entering The Copy Quantity

  Copying > Basic Operation Entering the copy quantity NOTE Press the Clear key to change the copy quantity. Start copying Press the Start key to start copying.

• Page 136: Copying Functions

  Copying > Copying Functions Copying Functions Copy screen shows the commonly used functions. By pressing [Functions], other selectable functions will be shown as a list. Use [ ] or [ ] to select the function. What do you want to do? Reference Page Specify the paper size and type.

• Page 137: Zoom

  Copying > Copying Functions Zoom Adjust the zoom to reduce or enlarge the image. Auto A3: 141% A5: 70% Adjusts the image to match the paper size. Standard Zoom Adjusts the image to match present sizes. Model Zoom Level (Original Model Zoom Level (Original Copy)

• Page 138: Zoom Entry

  Copying > Copying Functions Zoom Entry Specify the image size in 1% increment between 25% — 400% of the original. Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy. (Full Color) 10:10 Copy Copies Paper Zoom…

• Page 139
  Copying > Copying Functions [Zoom Entry] Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) 10:10 Zoom Zoom — Zoom Entry (25 — 400) 100% Auto Standard Zoom Zoom Entry Cancel Next > Cancel < Back Enter the magnification.

• Page 140: Duplex

  Copying > Copying Functions Duplex Print 1-sided or open book originals to 2-sided, or 2-sided or open book originals to 1-sided. Select the original binding orientation and desired final binding orientation. 1-sided>>1-sided Prints 1-sided to 1-sided. 1-sided>>2-sided Prints 1-sided to 2-sided. 2-sided>>1-sided Prints 2-sided to 1-sided.

• Page 141
  Copying > Copying Functions NOTE The paper sizes supported in 2-sided to 2-sided are Ledger, Letter-R, Letter, Legal, Executive, Statement-R, Oficio II, A3, A4-R, A4, A5-R, B4, B5-R, B5, Folio and 216 × 340 mm. The following sizes of originals and paper are supported in Book to 2-sided mode. Original: Ledger, Letter-R, A3, A4- R, A5-R, B4, B5-R and 8K.
• Page 142
  Copying > Copying Functions Select the desired Duplex option. Ready to copy. (Full Color) 10:10 Duplex — Duplex Duplex 1-sided>>1-sided Cancel < Back Ready to copy. (Full Color) 10:10 Duplex — Duplex 1-sided>>1-sided 1-sided>>2-sided 2-sided>>1-sided Use [ ] or [ ] to scroll up and down.
• Page 143
  Copying > Copying Functions Select the original orientation. Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) 10:10 Duplex — Duplex Duplex — Original Orientation Duplex Top Edge on Top 2-sided>>2-sided Binding in Original Top Edge on Left Left/Right Binding in Finishing Left/Right…

• Page 144: Combine

  Copying > Copying Functions Combine Combine 2 or 4 original sheets into 1 copied page. You can select the page layout or the type of boundary lines around the pages. 2 in 1 Copies 2 originals onto each page. 4 in 1 Copies 4 originals onto each page.

• Page 145
  Copying > Copying Functions Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy. (Full Color) 10:10 Copy Copies Paper Zoom Density Selection Auto 100% Normal 0 Duplex Combine Collate/ Offset 1-sided>>1-sided Collate Functions Favorites Select the function.
• Page 146
  Copying > Copying Functions Sets the boundary line type. 10:10 Ready to copy. (Full Color) 10:10 Ready to copy. (Full Color) Combine — Others Combine — Border Line Combine None 2 in 1 (L to R/T to B) Border Line Solid Line None Original Orientation…

• Page 147: Ecoprint

  Copying > Copying Functions EcoPrint Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion when high quality print is not required. Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy.

• Page 148: Hue Adjustment

  Copying > Copying Functions Hue Adjustment Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a strong green-yellow to make more creative copies. Original Adjust yellow to more green, Adjust yellowish-red to more yellow, adjust blue to more magenta adjust bluish-cyan to more blue NOTE…

• Page 149: Color Balance

  Copying > Copying Functions Color Balance Adjust the strength of cyan, magenta, yellow, and black. Less Magenta Original More Magenta NOTE This feature is used with full color and auto color copying. Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy.

• Page 150: Saturation

  Copying > Copying Functions Saturation Adjust the color saturation of the image. Grayish Original Vivid Results in paler color. Results in more vivid color. NOTE This feature is used with full color and auto color copying. Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy.

• Page 151: Auto Image Rotation

  Copying > Copying Functions Auto Image Rotation When original and paper source size are the same, but their orientation is different, rotate image 90 degrees. Display the screen. Referring to Basic Operation on page 4-2, display the screen. Ready to copy. (Full Color) 10:10 Ready to copy.

• Page 152: Interrupt Copy

  Copying > Interrupt Copy Interrupt Copy This function allows you to pause the current jobs in progress when you need to make copies immediately. When interruption copy ends, the machine resumes the paused print jobs. NOTE If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and printing resumes.

• Page 153: Printing

  Printing This chapter explains the following topics: Printing from Applications ……………………..5-2 Printing Data Saved on the Printer ……………………5-7 Private Print ……………………….. 5-7 Proof and Hold ……………………….5-9 Automatic Delete Setting for Temporary Documents …………….5-12…

• Page 154: Printing From Applications

  Printing > Printing from Applications Printing from Applications This section provides basic instructions for printing documents. Instructions are based on interface elements as they appear in Windows 7. You can print documents created on your computer once you install the printer driver from the included DVD (Product Library).

• Page 155: Start Printing

  Printing > Printing from Applications Select the Basic tab. Click the Page Sizes button to select the paper size for the document data. Click Print size and select the paper size to use for printing. Click OK button to return to the Print dialog box. Start printing.

• Page 156
  Printing > Printing from Applications Changing the default printer driver settings (Windows 7) The default printer driver settings can be changed. By selecting frequently used settings, you can omit steps when printing. The procedure is as follows. Click the start button, and then click Devices and Printers. Right-click the printer driver icon of the machine, and click the Printer properties menu of the printer driver.

• Page 157: Printer Driver Print Settings Screen

  Printing > Printing from Applications Printer driver print settings screen The printer driver print settings screen allows you to configure a variety of print-related settings. For more information, refer to the Printer Driver User Guide on the DVD. Description Quick Print Provides icons that can be used to easily configure frequently used functions.

• Page 158: Printer Driver Help

  Printing > Printing from Applications Printer Driver Help The printer driver includes Help. To learn more about print settings, display the printer driver print settings screen and display Help using either of the methods explained below. • Click the ? button in the upper right corner of the screen and then click the item you want to know about.

• Page 159: Printing Data Saved On The Printer

  Printing > Printing Data Saved on the Printer Printing Data Saved on the Printer Print data can be saved in the machine’s Job Box and printed when needed. Private Print Private Print stores the print data which is printed by using the printer driver as a Private Print. Refer to the Printer Driver User Guide on how to print a job as Private Print using the printer driver.

• Page 160
  Printing > Printing Data Saved on the Printer Print and delete the document. To print the document Document Box. 10:10 Job Box — Private Print doc 4100908135138 doc 0100908134821 Menu Cancel < Back Print NOTE The password entry screen will be displayed. Enter the password using the numeric keys. Document Box.

• Page 161: Proof And Hold

  Printing > Printing Data Saved on the Printer Proof and Hold Proof and Hold stores the print data which is printed by using the printer driver as a Proof and Hold Print job. Refer to the Printer Driver User Guide on how to print a job as Proof and Hold Print job using the printer driver. NOTE RAM disk mode must be enabled.

• Page 162
  Printing > Printing Data Saved on the Printer Printing and Deleting the Document You can print and delete documents stored in the Proof and Hold box. Display the screen. Document Box. 10:10 Job Box Removable Memory Document Box. 10:10 Job Box Sub Address Box Polling Box Private Print…
• Page 163
  Printing > Printing Data Saved on the Printer To delete Document Box. 10:10 Job Box — Proof and Hold doc 100831170850 doc 100831170814 doc 100831170659 doc 100831170519 Menu Cancel < Back Print 5-11…

• Page 164: Automatic Delete Setting For Temporary Documents

  Printing > Printing Data Saved on the Printer Automatic Delete Setting for Temporary Documents This setting specifies that documents, such as Private Printing, or Proof and Hold Printing, saved temporarily in the job box are automatically deleted after they have been saved for a set time. Temporary documents are not automatically deleted.

• Page 165: Sending

  Sending This chapter explains the following topics: Basic Operation …………………………6-2 Preparation for Sending a Document to a PC ………………..6-5 Making a note of the computer name and full computer name …………..6-5 Making a note of the user name and domain name …………….6-6 Creating a Shared Folder, Making a Note of a Shared Folder …………..

• Page 166: Basic Operation

  Sending > Basic Operation Basic Operation This machine can send a scanned image as an attachment to an E-mail message or to a PC linked to the network. In order to do this, it is necessary to register the sender and destination (recipient) address on the network. A network environment which enables the machine to connect to a mail server is required in order to send e-mail.

• Page 167: Selecting Color Mode

  Sending > Basic Operation Press the Send key NOTE If the touch panel is turned off, press the Energy Saver key or the Power key and wait for the machine to warm up. Place the originals For details, refer to Loading Originals on page 3-7. Selecting color mode Auto Color Automatically recognizes whether a document is…

• Page 168
  Sending > Basic Operation Selecting the functions Ready to send. 10:10 Press [Functions] to display the sending functions to use. Send Dest. : Check For details, refer to Sending Functions on page 6-39. bbb@abc.com One Touch Key Address Book Ext Address Book E-mail Folder Functions…

• Page 169: Preparation For Sending A Document To A Pc

  Sending > Preparation for Sending a Document to a PC Preparation for Sending a Document to a PC Check the information that needs to be set on the machine and create a folder to receive the document on your computer. Screens of Windows 7 are used in the following explanation. The details of the screens will vary in other versions of Windows.

• Page 170: Making A Note Of The User Name And Domain Name

  Sending > Preparation for Sending a Document to a PC Making a note of the user name and domain name Check the domain name and user name for logging onto Windows. Display the window. From the Start menu, select All Programs (or Programs), Accessories and then Command Prompt.

• Page 171: Creating A Shared Folder, Making A Note Of A Shared Folder

  Sending > Preparation for Sending a Document to a PC Creating a Shared Folder, Making a Note of a Shared Folder Create a shared folder to receive the document in the destination computer. NOTE If there is a workgroup in System Properties, configure the settings below to limit folder access to a specific user or group.

• Page 172
  Sending > Preparation for Sending a Document to a PC Right-click the scannerdata folder and click Share and Advanced sharing. Click the Advanced Sharing button. Make sure that the Sharing tab is selected. In Windows XP, right-click the scannerdata folder and select Sharing and Security… (or Sharing).
• Page 173
  Sending > Preparation for Sending a Document to a PC If the computer name that you made a note of on page 6-5 is the same as the domain name: If the computer name is not shown in [From this location], click the Locations button, select the computer name, and click the OK button.

• Page 174: Configuring Windows Firewall (For Windows 7)

  Sending > Preparation for Sending a Document to a PC Select Security. Select the user you entered. Make sure that checkmarks appear for the Modify and Read & execute permissions, and click the Close button. In Windows XP, click the Security tab and then click the OK button. Configuring Windows Firewall (for Windows 7) Permit sharing of files and printers and set the port used for SMB transmission.

• Page 175
  Sending > Preparation for Sending a Document to a PC Select the File and Printer Sharing checkbox. Add a port. From the Start menu, select Control Panel, System and Security, and Check firewall status. 6-11…
• Page 176
  Sending > Preparation for Sending a Document to a PC Select Specific local ports, and enter «139». 6-12…
• Page 177
  Sending > Preparation for Sending a Document to a PC Make sure all checkboxes are selected. Enter «Scan to SMB» in «Name» and click Finish. In Windows XP or Windows Vista From the Start menu, select Control Panel, System and Security (or Security Center), and then Check Firewall Status (or Windows Firewall).

• Page 178: Register The Shared Folder In The Address Book

  Sending > Preparation for Sending a Document to a PC Register the shared folder in the address book Display the screen. Ready to send. 10:10 Send Dest. : Check Recall One Touch Key Address Book Ext Address Book E-mail Folder 10:10 Address Book (All) Functions…

• Page 179
  Sending > Preparation for Sending a Document to a PC Enter the destination. Select the item that you want to change. 10:10 Add — Confirmation Name Sales department 1 E-mail Address Cancel < Back Save Select [SMB]. Enter the destination information. 10:10 Host Name Input:…
• Page 180
  Sending > Preparation for Sending a Document to a PC Confirm the connection status. 10:10 10:10 Menu Host Name PC001 Search Folder from Network Path pc001 scannerdata Search Folder by Host Name Port Connection Test Login User Name abcdnet james.smith Menu Cancel Close…

• Page 181: Specifying Destination

  Sending > Specifying Destination Specifying Destination Select the destination to which to send an image. Select the destination using either of the following methods. • Choosing from the Address Book (page 6-17) • Choosing by One Touch Key (page 6-19) •…

• Page 182
  Sending > Specifying Destination Destination Search 10:10 Searches by destination name. Address Book (All) Sales department 1 123456 Advanced search by type of registered destination (E- Support department 123@456789.co… mail, Folder (SMB/FTP), FAX or Group). Sales department 1 12345.com Support department 11111.com Menu Cancel…

• Page 183: Choosing By One Touch Key

  Sending > Specifying Destination Choosing by One Touch Key Select the destination using the One Touch Keys. NOTE For more information on adding One Touch keys, refer to Adding a Destination on One Touch Key on page 6-36. Display the screen. Referring to Basic Operation on page 6-2, display the screen.

• Page 184: Entering A New E-Mail Address

  Sending > Specifying Destination Entering a New E-mail Address Enter the desired e-mail address. NOTE Access the Command Center RX beforehand and specify the settings required for sending e-mail. For details, refer to Command Center RX (Settings for E-mail) on page 2-25. Display the screen.

• Page 185: Specifying A New Pc Folder

  Sending > Specifying Destination Specifying a New PC Folder Specify either the desired shared folder on a computer or an FTP server as the destination. NOTE Refer to Creating a Shared Folder, Making a Note of a Shared Folder on page 6-7 for details on how to share a folder. Be sure that SMB Protocol or FTP in the Command Center RX is On.

• Page 186
  Sending > Specifying Destination Select the folder specification method. Ready to send. 10:10 Folder — SMB Search Folder from Network Search Folder by Host Name Enter Folder Path Cancel < Back To search for a folder on a PC on the network, press [Search Folder from Network] or [Search Folder by Host Name].
• Page 187
  Sending > Specifying Destination Enter the destination information. Folder — Host Name Input: PC001 Limit: Del. Cancel Next > Enter the next information. Once you have entered one item, press [Next] to advance to the next item. For send to folder (SMB) Item Data to be entered Max.
• Page 188
  Sending > Specifying Destination Confirm the information. Check the information. Change the information as needed by pressing the item in question. Ready to send. 10:10 Folder — Confirmation Use [ ] or [ ] to scroll up and down. Host Name PC001 Path pc001 scannerdata…

• Page 189: Checking And Editing Destinations

  Sending > Specifying Destination Checking and Editing Destinations Check and edit a selected destination. Display the screen. Referring to Specifying Destination on page 6-17, specify the destination. Ready to send. 10:10 Send Dest. : Check bbb@abc.com One Touch Key Address Book Ext Address Book E-mail Folder…

• Page 190: Sending To Different Types Of Destinations (Multi Sending)

  Sending > Specifying Destination Sending to Different Types of Destinations (Multi Sending) You can specify destinations that combine e-mail addresses, folders (SMB or FTP) and fax numbers*. This is referred to as Multi Sending. This is useful for sending to different types of destination (e-mail addresses, folders, etc.) in a single operation.

• Page 191: Registering Destinations In The Address Book

  Sending > Registering Destinations in the Address Book Registering Destinations in the Address Book Add a new destination to the Address Book. There are two registering methods, contacts and groups. When adding a group, enter the group name and select group members from the Address Book. Adding a Contact A maximum of 200 contact addresses can be registered.

• Page 192
  Sending > Registering Destinations in the Address Book Enter the destination name. Add — Name Input: Sales department 1 Limit: Del. Cancel < Back Next > Up to 32 characters can be entered. Refer to Character Entry Method on page 11-7 for details on entering characters. Enter the destination.
• Page 193
  Sending > Registering Destinations in the Address Book Confirm the connection status. 10:10 10:10 Menu Host Name PC001 Search Folder from Network Path pc001 scannerdata Search Folder by Host Name Port Connection Test Login User Name abcdnet james.smith Menu Cancel Close Connected.
• Page 194
  Sending > Registering Destinations in the Address Book 10:10 Host Name Path Port Login User Name Menu Cancel Enter the address number. Select the item that you want to change. 10:10 10:10 Add — Confirmation Address Number (000 — 250) Address Number Auto Cancel…

• Page 195: Adding A Group

  Sending > Registering Destinations in the Address Book Adding a Group Compile two or more contacts into a group. Designations in the group can be added at the same time. When adding a group, a maximum of 50 groups can be added in the Address Book. Before adding a group in the Address Book, the contacts to be included in the group must be added first.

• Page 196
  Sending > Registering Destinations in the Address Book Enter the group name. Add — Name Input: Support department Limit: Del. Cancel < Back Next > Up to 32 characters can be entered. Refer to Character Entry Method on page 11-7 for details on entering characters. Select the members (destinations).
• Page 197
  Sending > Registering Destinations in the Address Book You can also press [Menu] to perform a more detailed search. 10:10 10:10 Address Book (All) Menu Narrow Down Sales department 1 0123456 Search (Name) Sales department 1 Search(No.) Support department 0234567 Sort (Name) Support department Menu…

• Page 198: Editing And Deleting Address Book Entries

  Sending > Registering Destinations in the Address Book Editing and Deleting Address Book Entries Edit and delete the destinations (contacts) you added to the Address Book. Display the screen. Ready to send. 10:10 Send Dest. : Check Recall One Touch Key Address Book Ext Address Book E-mail…

• Page 199
  Sending > Registering Destinations in the Address Book 10:10 Address: Sales department 1 Name Sales department 1 E-mail Address Cancel < Back Save To delete a member (group) To delete a member from a group, select the destination you wish to delete and press [(Delete)] (the trash can icon).

• Page 200: Adding A Destination On One Touch Key

  Sending > Adding a Destination on One Touch Key Adding a Destination on One Touch Key Add a new destination (contact or group) on One Touch Key. Adding a Destination Add a new destination (contact or group). A maximum of 100 destinations can be registered. To register a destination to a One Touch Key, it must first be registered in the Address Book.

• Page 201
  Sending > Adding a Destination on One Touch Key You can also press [Menu] to perform a more detailed search. Select the address. 10:10 10:10 Address Book (All) Menu Narrow Down 0123456 Sales department 1 Search (Name) Sales department 1 Search(No.) Support department 0234567 Sort (Name)

• Page 202: Editing And Deleting One Touch Key

  Sending > Adding a Destination on One Touch Key Editing and Deleting One Touch Key Edit and delete the destinations you added to One Touch Key. Display the screen. Use [ ] or [ ] to scroll up and down. System Menu/Counter.

• Page 203: Sending Functions

  Sending > Sending Functions Sending Functions Send screen shows the commonly used functions. By pressing [Functions], other selectable functions will be shown as a list. Use [ ] or [ ] to select the function. What do you want to do? Reference Page Select the file format for images being sent.

• Page 204: Sending Size

  Sending > Sending Functions Sending Size Select size of image to be sent. Same as Original Size Automatically sends the same size as the original. Metric Select from A3, A4, A5, A6, B4, B5, B6, Folio or 216 × 340 mm. Inch Select from Ledger, Letter, Legal, Statement, 11 ×…

• Page 205
  Sending > Sending Functions [Metric], [Inch] or [Others] Ready to send. 10:10 Ready to send. 10:10 Sending Size Sending Size — Metric Same as Metric Inch Original Size Others Cancel Cancel < Back Use [ ] or [ ] to scroll up and down. Select the desired size.

• Page 206: File Separation

  Sending > Sending Functions File Separation Create several files by dividing scanned original data page by page, and send the files. NOTE Three-digit serial number such as abc_001.pdf, abc_002.pdf… is attached to the end of the file name. Display the screen. Referring to Basic Operation on page 6-2, display the screen.

• Page 207: E-Mail Subject/Body

  Sending > Sending Functions E-mail Subject/Body Add subject and body when sending a document. NOTE The subject can include up to 60 characters, and the body can include up to 500 characters. Display the screen. Referring to Basic Operation on page 6-2, display the screen. Ready to send.

• Page 208: Ftp Encrypted Tx

  Sending > Sending Functions FTP Encrypted TX Encrypt images when using FTP. Encryption secures the document transmission. NOTE To use FTP encryption, set SSL to [On] in the Secure Protocol settings. For details, refer to Secure Protocol on page 9-22. Display the screen.

• Page 209: Wsd Scan

  Display the window. From the Start menu, select Network. Install the driver. Right-click the machine’s icon (Kyocera: XXX:XXX) and then click Install. NOTE If the User Account Control window appears, click Continue. If the Found New Hardware window appears, click Cancel.

• Page 210
  Sending > WSD Scan Display the screen. Ready to send. 10:10 Ready to send. 10:10 Send Dest. : Send Dest. : Check Check Recall Recall One Touch Key Address Book Ext Address Book WSD Scan E-mail Folder Functions Favorites Functions Favorites Scan the originals.
• Page 211
  Sending > WSD Scan Procedure from Your Computer Ready to send. 10:10 WSD Scan From Computer From Operation Panel Cancel Use the software installed on the computer to send the images. 6-47…

• Page 212: Scanning Using Twain

  Sending > Scanning using TWAIN Scanning using TWAIN This section explains how to scan an original using TWAIN. The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same way. Display the window.

• Page 213
  Sending > Scanning using TWAIN Item Detail Imaging Color Settings This setting specifies the type of color for the image. Resolution This setting specifies the dpi (dots per inch), or sharpness, for the image. Image Quality This setting specifies the overall image quality. Make sure your selection matches the original that you are scanning.
• Page 214
  Sending > Scanning using TWAIN 6-50…

• Page 215: Document Box

  Document Box This chapter explains the following topics: What is Document Box? ………………………. 7-2 Printing Documents Stored in Removable USB Memory ………………. 7-3 Saving Documents to USB Memory (Scan to USB) ………………. 7-6 Removing USB Memory ………………………. 7-9 Functions for Document Box ……………………..7-10 Duplex …………………………

• Page 216: Saving Documents To Usb Memory (Scan To Usb)

  Document Box > What is Document Box? What is Document Box? A document box is a place in machine memory that can be used to store document data scanned from the machine, a print job from a computer, or fax data. The following types of document boxes are available.

• Page 217: Printing Documents Stored In Removable Usb Memory

  Document Box > Printing Documents Stored in Removable USB Memory Printing Documents Stored in Removable USB Memory Plugging USB memory directly into the machine enables you to quickly and easily print the files stored in the USB memory without having to use a computer. The following file types can be printed: •…

• Page 218
  Document Box > Printing Documents Stored in Removable USB Memory Display the screen. Document Box. 10:10 Document Box. 10:10 Removable Memory Removable Memory 11-3-3.JPG 7-9-2.JPG 1/25 Menu Cancel Print Menu Cancel Print When the machine reads the USB memory, Removable Memory screen may appear. NOTE If the screen does not appear, press the Document Box key and then [Removable Memory].
• Page 219
  Document Box > Printing Documents Stored in Removable USB Memory Select the functions. Ready to print from Box. 10:10 Print Copies Paper Collate/ Duplex Selection Offset Collate 1-sided Functions Cancel Select the function to use for Document Box. Press [Functions] to display other functions. For details, refer to Functions for Document Box on page 7-10.

• Page 220: Saving Documents To Usb Memory (Scan To Usb)

  Document Box > Saving Documents to USB Memory (Scan to USB) Saving Documents to USB Memory (Scan to USB) This function allows you to store scanned image files in USB memory connected to the machine. You can store files in PDF, TIFF, JPEG or XPS format.

• Page 221
  Document Box > Saving Documents to USB Memory (Scan to USB) Display the screen. Document Box. 10:10 Removable Memory 1/25 Menu Cancel Print When the machine reads the USB memory, Removable Memory screen may appear. NOTE If the screen does not appear, press the Document Box key and then [Removable Memory].

• Page 222: Removing Usb Memory

  Document Box > Saving Documents to USB Memory (Scan to USB) Start storing. Press the Start key to start storing. Remove the USB memory. For details, refer to Removing USB Memory on page 7-9.

• Page 223: Removing Usb Memory

  Document Box > Removing USB Memory Removing USB Memory Certain operations must be performed on the screen before USB memory can be removed. IMPORTANT Be sure to follow the proper procedure to avoid damaging the data or USB memory. Display the screen. Document Box.

• Page 224: Functions For Document Box

  Document Box > Functions for Document Box Functions for Document Box Print or Store file screen in Document Box shows the commonly used functions. By pressing [Functions], other selectable functions will be shown as a list. Use [ ] or [ ] to select the function.

• Page 225: Duplex

  Document Box > Functions for Document Box Duplex Print a document 1-sided or 2-sided. Select the original binding orientation and desired final binding orientation. 2-sided Print a 2-sided document so that the sheets are aligned properly for binding on the left or right 2-sided Print a 2-sided document so that the sheets are aligned properly for binding on the top.

• Page 226: Encrypted Pdf Password

  Document Box > Functions for Document Box Encrypted PDF Password Enter the preassigned password to print the PDF data. Display the screen. Referring to Printing Documents Stored in Removable USB Memory on page 7-3, display the screen. Ready to print from Box. 10:10 Ready to print from Box.

• Page 227: Jpeg/Tiff Print

  Document Box > Functions for Document Box JPEG/TIFF Print Select the image size when printing JPEG or TIFF files. Paper Size Fit the image size to the selected paper size. Image Resolution Print at resolution of the actual image. Print Resolution Fit the image size to the print resolution.

• Page 228: Xps Fit To Page

  Document Box > Functions for Document Box XPS Fit to Page Reduces or enlarges the image size to fit to the selected paper size when printing XPS files. Display the screen. Referring to Printing Documents Stored in Removable USB Memory on page 7-3, display the screen.

• Page 229: Storing Size

  Document Box > Functions for Document Box Storing Size Select size of image to be stored. Same as Original Size Store an image the same size as the original. Metric Select from A3, A4, A5, A6, B4, B5, B6, Folio or 216 × 340 mm. Inch Select from Ledger, Letter, Legal, Statement, 11 ×…

• Page 230
  Document Box > Functions for Document Box [Metric], [Inch] or [Others] Ready to store in Box. 10:10 Ready to store in Box. 10:10 Storing Size Storing Size — Metric Same as Metric Inch Original Size Others Cancel Cancel < Back Use [ ] or [ ] to scroll up and down.

• Page 231: Status / Job Cancel

  Status / Job Cancel This chapter explains the following topics: Checking Job Status ……………………….8-2 Details of the Status Screens ……………………8-3 Checking Job History ……………………….8-6 Sending the Log History ……………………….. 8-7 Setting the Destination ……………………..8-8 Automatic Log History Transmission ………………….. 8-9 Manual Log History Transmission ………………….

• Page 232: Checking Job Status

  Status / Job Cancel > Checking Job Status Checking Job Status Check the status of jobs being processed or waiting to be printed. Available Status Screens The processing and waiting statuses of jobs are displayed as a list on the touch panel in four different screens — Printing Jobs, Sending Jobs, Storing Jobs, and Scheduled Jobs.

• Page 233: Details Of The Status Screens

  Status / Job Cancel > Checking Job Status Details of the Status Screens Print Job Status Screen Status/Job Cancel. 10:10 Print Job Status 0089 doc0000892010092514… 5/23 Cancel Pause All Close Print Jobs Item/Key Detail — Icons that indicate the job type Copy job Printer job Job from Document Box…

• Page 234
  Status / Job Cancel > Checking Job Status Send Job Status screen Status/Job Cancel. 10:10 Send Job Status 0005 0123456 Process Menu Cancel Close Display/Key Detail — Icons that indicate the job type Sending Job FAX Sending Job Folder (SMB/FTP) Sending Job E-mail Sending Job Application Sending Job Mixed (Multiple)
• Page 235
  Status / Job Cancel > Checking Job Status Store Job Status screen Status/Job Cancel. 10:10 Store Job Status 0016 doc0000162010082913… Storing Cancel Close Display/Key Details — Icons that indicate the job type Storing Job Scan Storing Job Printer Storing Job FAX [Cancel] Select the job you want to cancel from the list, and press this key.

• Page 236: Checking Job History

  Status / Job Cancel > Checking Job History Checking Job History Check the history of completed jobs. Available Job History Screens The job histories are displayed separately in three screens — Printing Jobs, Sending Jobs, and Storing Jobs. The following job histories are available. Print Job Log Copy Send Job Log…

• Page 237: Sending The Log History

  Status / Job Cancel > Sending the Log History Sending the Log History You can send the log history by e-mail. You can either send it manually as needed or have it sent automatically whenever a set number of jobs is reached. Display the screen.

• Page 238: Setting The Destination

  Status / Job Cancel > Sending the Log History Setting the Destination Set the destination to which log histories are sent. Display the screen. Referring to Sending the Log History on page 8-7, display the screen. System Menu/Counter. 10:10 System Menu/Counter. 10:10 Report — Sending Log History Sending Log History — Destination…

• Page 239: Automatic Log History Transmission

  Status / Job Cancel > Sending the Log History Automatic Log History Transmission This function automatically sends the log history to the specified destinations whenever a set number of jobs has been logged. Display the screen. Referring to Sending the Log History on page 8-7, display the screen. System Menu/Counter.

• Page 240: Setting E-Mail Subject

  Status / Job Cancel > Sending the Log History Setting E-mail Subject Set the subject automatically entered when sending log histories by E-mail. Display the screen. Referring to Sending the Log History on page 8-7, display the screen. System Menu/Counter. 10:10 Report — Sending Log History Send Log History…

• Page 241: Check Of Device Status

  Status / Job Cancel > Check of Device Status Check of Device Status Configure the devices/lines installed or connected to this machine or check their status. You can also control devices depending on their status. Display the screen. Status/Job Cancel. 10:10 Status Print Job Log…

• Page 242: Removable Memory

  Status / Job Cancel > Check of Device Status Printer Status/Job Cancel. 10:10 Printer Ready. Error information such as paper jam, out of toner, or out of paper, and status such as waiting or printing are displayed. FAX (Option) Status/Job Cancel. 10:10 Receiving…

• Page 243: Checking The Remaining Amount Of Toner And Paper

  Status / Job Cancel > Checking the Remaining Amount of Toner and Paper Checking the Remaining Amount of Toner and Paper Check the remaining amount of toner, paper, and staples on the touch panel. Display the screen. Status/Job Cancel. 10:10 Status Printer Running…

• Page 244
  Status / Job Cancel > Checking the Remaining Amount of Toner and Paper Staple Status Status/Job Cancel. 10:10 Staple Staple You can check the status of staples 8-14…

• Page 245: Setup, Registration, And User Management

  Setup, Registration, and User Management This chapter explains the following topics: System Menu …………………………9-2 Operation Method ………………………. 9-2 System Menu Settings ……………………..9-3 Report …………………………9-5 User Property ……………………….9-7 Cassette/MP Tray Settings ……………………9-8 Common Settings ………………………. 9-9 Copy …………………………

• Page 246: System Menu

  Setup, Registration, and User Management > System Menu System Menu Configure settings related to overall machine operation. Operation Method The system menu is operated as follows: Display the screen. Configure the function. System Menu/Counter. 10:10 System Menu System Date/Timer Displays available Scrolls up and down functions.

• Page 247: System Menu Settings

  Setup, Registration, and User Management > System Menu System Menu Settings System Menu include; Item Description Reference Page Quick Setup Wizard The Quick Setup Wizard configures Fax, Network and Energy Saver 3-26 settings. Language Select the language displayed on the touch panel. Report Print reports to check the machine settings and status.

• Page 248
  Setup, Registration, and User Management > System Menu Item Description Reference Page Favorites/Application Configure settings for Favorites/Application. 9-16 Internet Set the proxy for connection to the Internet from an application. 9-17 Address Book/One Touch Configures Address Book and One Touch Key settings. For details on —…

• Page 249: Language

  Setup, Registration, and User Management > System Menu Language Item Description Language Select the language displayed on the touch panel. Value: English, Deutsch, Français, Español, Italiano, Nederlands, Русский, Português Report Print reports to check the machine settings and status. Default settings for printing the result reports can also be configured.

• Page 250: Result Report Settings

  Setup, Registration, and User Management > System Menu Item Description Service Status Prints the service status. More detailed information is available than on the Status Page. Service personnel usually print the service status pages for maintenance purpose. Accounting Report Prints the accounting report, allowing you to check the accounts that have been registered on the machine.

• Page 251: User Property

  Setup, Registration, and User Management > System Menu User Property Allows you to view information about logged in users and edit some of that information. For details on User Login, refer to User Login Administration on page 9-34. Item Description User Name Changes the name shown on the user list.

• Page 252: Cassette/Mp Tray Settings

  Setup, Registration, and User Management > System Menu Cassette/MP Tray Settings Select paper size and media type for Cassette 1 to 3 and multi purpose tray. Cassette1 (to 3) Item Description Paper Size Set the paper size to load in Cassette 1 and optional paper feeders (Cassette 2 and 3). Value Auto: Automatically detect paper size.

• Page 253: Common Settings

  Setup, Registration, and User Management > System Menu Common Settings Configures overall machine operation. Default Screen Item Description Default Screen Select the screen appearing right after start-up (default screen). Value: Copy, Send, FAX, Document Box, Favorites/Application, Status Sound Item Description Buzzer Set options for buzzer sound during the machine operations.

• Page 254: Paper Settings

  Setup, Registration, and User Management > System Menu Paper Settings Item Description Custom Paper Size Set up frequently-used custom paper size. To register a custom paper size, press [On] and enter the desired size. The custom size option is displayed on the screen to select paper set in the multi purpose tray. Value Custom: Off, On Size Entry…

• Page 255
  Setup, Registration, and User Management > System Menu Media Type Setting Select the media type you wish to change. Y: Available N: Not available Paper Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3 Extra Weight Heavy Weight (g/m²) 52 g/m²…

• Page 256: Function Defaults

  Setup, Registration, and User Management > System Menu Function Defaults Item Description File Format Select the default type of the files to be sent. Value: PDF, TIFF, JPEG, XPS Original Orientation Set the original orientation defaults. Value: Top Edge Top, Top Edge Left Collate/Offset Set the defaults for Collate/Offset.

• Page 257
  Setup, Registration, and User Management > System Menu Item Description E-mail Subject/Body Set the subject and body automatically entered (default subject and body) when sending the scanned originals by E-mail. Value Subject: Up to 60 characters can be entered. Body: Up to 500 characters can be entered. FTP Encrypted TX Set the default value for document encryption during transmission.

• Page 258: Error Handling

  Setup, Registration, and User Management > System Menu Error Handling Item Description Duplexing Error Select what to do when duplex printing is not possible for the selected paper size and media type. Value 1-sided: Printed in 1-sided Display Error: Message to cancel printing is displayed. Finishing Error Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or media type.

• Page 259: Copy

  Setup, Registration, and User Management > System Menu Keyboard Layout Item Description Keyboard Layout Change the layout of the touch panel keyboard used to enter characters. Value: QWERTY, QWERTZ, AZERTY USB Keyboard Type Item Description USB Keyboard Type Select the type of USB keyboard that you want to use. Value: US-English, US-English with Euro, French, German Offset One Page Documents Item…

• Page 260: Send

  Setup, Registration, and User Management > System Menu Send Configures settings for sending functions. Item Description Dest. Check before Send When performing sending jobs, display the confirmation screen of destinations after pressing the Start key. Value: Off, On Entry Check for New Dest. When adding new destination, display the entry check screen to check the entered destination.

• Page 261: Internet

  Setup, Registration, and User Management > System Menu Item Description Menu You can install new applications. You can view detailed information on the selected application by pressing [Detail]. NOTE: To install the applications, insert the USB memory containing the application to be installed into the USB Port.

• Page 262
  Setup, Registration, and User Management > System Menu Item Description EcoPrint EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem. Value: Off, On Override A4/Letter Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing.

• Page 263: System

  Setup, Registration, and User Management > System Menu System Configures machine system settings. Network Configures network settings. Host Name Item Description Host Name Check the host name of the machine. TCP/IP Item Description TCP/IP Set up TCP/IP to connect to the Windows network.* Value: Off, On IPv4 Settings Set up TCP/IP (IPv4) to connect to the network.

• Page 264
  Setup, Registration, and User Management > System Menu Item Description IPv6 Settings Set up TCP/IP (IPv6) to connect to the network. The IPv6 setting is available when selecting [On] for [TCP/IP].* IPv6 Sets whether to use IPv6. Value: Off, On Manual Setting Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
• Page 265
  Setup, Registration, and User Management > System Menu Item Description Protocol Detail The table below lists the network related function settings. The network related functions are available when [TCP/IP] is [On]. NetBEUI Selects whether or not to receive documents using NetBEUI.* Value: Off, On Select whether or not to receive documents using LPD as the network protocol.* Value: Off, On…

• Page 266: Secure Protocol

  Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers. If you want to disable KYOCERA Net Viewer functionality, Enhanced WSD, Enhanced WSD (SSL), SNMP and SNMPv3 (refer to Protocol Detail on page 9-21) must be set to [Off].

• Page 267: Interface Block Setting

  Setup, Registration, and User Management > System Menu Item Description SMTP Security Select the communication protocol according to the type of security employed by the SMTP server. This setup is available when SSL is [On]. Value: Off, SSL/TLS, STARTTLS POP3 Security (User 1) Select the communication protocol according to the type of security employed by the POP3 server.

• Page 268: Date/Timer

  Setup, Registration, and User Management > System Menu Main Memory Item Description Main Memory Select the memory allocation scheme based on the application in which you are using the equipment.* Value: Printer Priority, Normal, Copy Priority After changing the setting, restart the system or turn the machine OFF and then ON. Date/Timer Configures settings related to the date and time.

• Page 269
  Setup, Registration, and User Management > System Menu Item Description Sleep Level Select the Sleep level. Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode. Value: Quick Recovery, Energy Saver NOTE: If the optional Gigabit Ethernet Board is installed, Energy Saver cannot be specified.

• Page 270: Adjustment/Maintenance

  Setup, Registration, and User Management > System Menu Adjustment/Maintenance Adjust printing quality and conduct machine maintenance. Item Description Density Adjustment Adjust density. Copy Adjust copy density. Adjustment can be made in 7 levels. Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker) Send/Box Adjust scan density when sending or storing the data in Document Box.

• Page 271
  Setup, Registration, and User Management > System Menu Item Description Tone Curve Adjustment After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output may shift or color drift may occur. Use this function to correct color settings when the color of a finished copy does not match the original.

• Page 272: Color Registration Procedure

  Setup, Registration, and User Management > System Menu Color Registration Procedure Normal registration and detailed settings are available for Color Registration. Color drift can be largely corrected through normal registration. However, if it is not resolved or to perform more detailed settings, use the detailed settings. NOTE To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.

• Page 273
  Setup, Registration, and User Management > System Menu Chart Example Color Registration Correction Chart MH-F MH-R CH-F CH-R YH-F YH-R Enter the appropriate value. Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for that color is not required.
• Page 274
  Setup, Registration, and User Management > System Menu Select the chart to be corrected. System Menu/Counter. 10:10 Normal — Registration MH-F MH-R CH-F Cancel Start Press [+] or [-] to enter the values read from the chart. System Menu/Counter. 10:10 Registration — MH-1 (I — A, 0 — 9) Cancel…

• Page 275: Detailed Settings

  Setup, Registration, and User Management > System Menu Detailed Settings Display the screen. Use [ ] or [ ] to scroll up and down. System Menu/Counter. 10:10 System Menu System Date/Timer Adjustment/Maintenance System Menu/Counter. 10:10 Adjustment/Maintenance Correcting Black Line Display Brightness Color Registration Tone Curve Adjustment System Menu/Counter.

• Page 276
  Setup, Registration, and User Management > System Menu Chart Example Enter the appropriate value. Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for that color is not required. For the illustration, B is the appropriate value. From charts V-1 to V-5, read only the values from V-3 (center).
• Page 277
  Setup, Registration, and User Management > System Menu Select the chart to be corrected. System Menu/Counter. 10:10 Detail — Registration MH-1 MH-2 MH-3 MH-4 Cancel Start Press [+] or [-] to enter the values read from the chart. System Menu/Counter. 10:10 Registration — MH-1 (I — A, 0 — 9)

• Page 278: User Login Administration

  Setup, Registration, and User Management > User Login Administration User Login Administration User login administration specifies how the user access is administered on this machine. Enter correct login user name and password for user authentication to login. Access are in three levels — User, Administrator, and Machine Administrator. The security levels can be modified only by the machine administrator.

• Page 279: User Login Settings

  Setup, Registration, and User Management > User Login Administration User Login Settings Display the screen. Use [ ] or [ ] to scroll up and down. System Menu/Counter. 10:10 System Menu Internet Address Book/One Touch User Login/Job Accounting Printer System Menu/Counter. 10:10 User Login/Job Accounting User Login Settings…

• Page 280: Enabling/Disabling User Login Administration

  Setup, Registration, and User Management > User Login Administration Enabling/Disabling User Login Administration This enables user login administration. Select one of the following authentication methods: Local Authentication User authentication based on user properties on the local user list stored in the machine. Network Authentication User authentication based on Authentication Server.

• Page 281
  Setup, Registration, and User Management > User Login Administration Enter a domain name. System Menu/Counter. 10:10 Network Authentication — Domain Name User Login — Network Authentication Input: Limit: Server Type Kerberos Del. Host Name Domain Name Cancel < Back Save Cancel When selecting [NTLM] or [Kerberos] as the server type, enter a domain name of 256 characters or less.

• Page 282: Adding A User

  Setup, Registration, and User Management > User Login Administration Adding a User This adds a new user. You can add Up to 100 users (including the default login user name). The table below explains the user information to be registered. User Name* Enter the name displayed on the user list (up to 32 characters).

• Page 283: User Name

  Setup, Registration, and User Management > User Login Administration Display the screen. Referring to User Login Settings on page 9-35, display the screen. System Menu/Counter. 10:10 System Menu/Counter. 10:10 User Login/Job Acco… — User Login Setting User Login S… — Local User List User Login Admin Admin…

• Page 284
  Setup, Registration, and User Management > User Login Administration Check the settings. Check the settings and change or add information as needed. [User Name] Select the item that you want to change. 10:10 User Name Add — Confirmation Input: User A Limit: User Name User A…
• Page 285
  Setup, Registration, and User Management > User Login Administration [E-mail Address] Select the item that you want to change. 10:10 E-mail Address Add — Confirmation Input: abc@def.com Limit: E-mail Address Del. Access Level User My Panel Local Authorization Cancel < Back Save Cancel [Access Level]…

• Page 286: Local User Authorization

  Setup, Registration, and User Management > User Login Administration Local User Authorization Enables local user authorization. Job use can be prohibited for specific users. Set when adding a user (see page 9-38) or editing and deleting users (see page 9-44). Display the screen.

• Page 287: My Panel

  Setup, Registration, and User Management > User Login Administration My Panel Registers settings for individual users. Settings registered here can be applied simply by logging in. Set when Adding a User (see page 9-38) or Editing and Deleting Users (see page 9-44). Environments in which shortcut can be configured Language Select the language displayed on the touch panel.

• Page 288: Editing And Deleting Users

  Setup, Registration, and User Management > User Login Administration Editing and Deleting Users User properties can be changed and users can be deleted. Display the screen. Referring to User Login Settings on page 9-35, display the screen. System Menu/Counter. 10:10 User Login/Job Acco…

• Page 289
  Setup, Registration, and User Management > User Login Administration [Login Password] System Menu/Counter. 10:10 Login Password User:User A Input: Limit: User Name User A Del. Login User Name User A Login Password ********** Others Account Name Cancel Save Cancel Next > Enter the same login password twice for confirmation purposes.
• Page 290
  Setup, Registration, and User Management > User Login Administration [Local Authorization] System Menu/Counter. 10:10 System Menu/Counter. 10:10 User:User A Local Authorization Printer E-mail Address Printer (Full Color) Access Level Administrator My Panel Copy Local Authorization Copy (Full Color) Cancel Save Cancel Use [ ] or […

• Page 291: Simple Login

  Setup, Registration, and User Management > User Login Administration Simple Login The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to use this functionality. For details, refer to Adding a User on page 9-38. Simple Login Settings Enable simple login.

• Page 292
  Setup, Registration, and User Management > User Login Administration System Menu/Counter. 10:10 System Menu/Counter. 10:10 User Login/Job Acco… — User Login Setting User Login/Job Acc… — Simple Login Settings User Login Simple Login Local Authentication Local User List Simple Login Setup Simple login settings System Menu/Counter.
• Page 293
  Setup, Registration, and User Management > User Login Administration Network user System Menu/Counter. 10:10 Login User Name Add — Network User Input: Limit: Login User Name Del. Keyboard Login Password Keyboard Cancel < Back Next > Cancel Login Password System Menu/Counter. 10:10 Add — Network User Input:…
• Page 294
  Setup, Registration, and User Management > User Login Administration [User] Select the item that you want to change. 10:10 System Menu/Counter. 10:10 Add — Confirmation User Name User A Local User User User A Network User Password Login Icon Male 1 Cancel <…
• Page 295
  Setup, Registration, and User Management > User Login Administration System Menu/Counter. 10:10 System Menu/Counter. 10:10 User Login/Job Acco… — User Login Setting User Login/Job Acc… — Simple Login Settings User Login Simple Login Local Authentication Local User List Simple Login Setup Simple login settings Local User Authorization <…
• Page 296
  Setup, Registration, and User Management > User Login Administration [Icon] System Menu/Counter. 10:10 System Menu/Counter. 10:10 Edit Icon Male 1 Male 2 Female 1 Name User A Female 2 Soccer Tennis User User A Basket Piano Guitar Password Login Trumpet Bicycle Icon Male 1…

• Page 297: Group Authorization

  Setup, Registration, and User Management > User Login Administration Group Authorization Set restrictions of the machine usage by each individual group registered in the authentication server. NOTE To use the group authorization settings, [Network Authentication] must be selected for the authentication method and [NTLM] or [Kerberos] must be selected as the server type in Enabling/Disabling User Login Administration on page 9- 36.

• Page 298
  Setup, Registration, and User Management > User Login Administration Storing in Box Select whether or not to reject usage of storing in the document boxes. Storing in Memory Select whether or not to reject usage of storing in the removable memory. For Group ID, specify PrimaryGroupID assigned by ActiveDirectory of Windows.
• Page 299
  Setup, Registration, and User Management > User Login Administration [Access Level] Select the access level. 10:10 Add — Access Level Administrator User Cancel < Back Next > Check the settings. Check the settings and change or add information as needed. [Group ID] Select the item that you want to change.
• Page 300
  Setup, Registration, and User Management > User Login Administration [Printer], [Printer (Full Color)], [Copy], [Copy (Full Color)], [Send], [FAX Transmission], [Storing in Box], [Storing in Memory] Select the item that you want to change. 10:10 System Menu/Counter. 10:10 Add — Confirmation Printer Group ID 1234567890…

• Page 301: Obtain Network User Property

  Setup, Registration, and User Management > User Login Administration Obtain Network User Property Set the required information to obtain the network user property from the LDAP server. NOTE To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the authentication method and [NTLM] or [Kerberos] must be selected as the server type in Enabling/Disabling User Login Administration on page 9-36.

• Page 302
  Setup, Registration, and User Management > User Login Administration [Port] System Menu/Counter. 10:10 System Menu/Counter. 10:10 Obtain NW User… — LDAP Server Information Obtain NW User Property — Port Server Name (1 — 65535) Port Name 1 displayName Name 2 Cancel <…

• Page 303: Job Accounting

  Setup, Registration, and User Management > Job Accounting Job Accounting Job accounting Manages the copy/print count accumulated by individual accounts by assigning an ID to each account. Job accounting helps the following activities in business organizations. • Manageability of up to 100 individual accounts. •…

• Page 304
  Setup, Registration, and User Management > Job Accounting Other users login for operations. Enter the account ID. 10:10 Enter the account ID. Check Login Counter 9-60…

• Page 305: Job Accounting Settings

  Setup, Registration, and User Management > Job Accounting Job Accounting Settings Display the screen. Use [ ] or [ ] to scroll up and down. System Menu/Counter. 10:10 System Menu Internet Address Book/One Touch User Login/Job Accounting Printer System Menu/Counter. 10:10 User Login/Job Accounting User Login Settings…

• Page 306: Enabling/Disabling Job Accounting

  Setup, Registration, and User Management > Job Accounting Enabling/Disabling Job Accounting Enable job accounting. Display the screen. Referring to Job Accounting Settings on page 9-61, display the screen. System Menu/Counter. 10:10 User Login/Job… — Job Accounting Settings Job Accounting Print Accounting Report Total Job Accounting Each Job Accounting <…

• Page 307: Login/Logout

  Setup, Registration, and User Management > Job Accounting Login/Logout If job accounting is enabled, an account ID entry screen appears each time you use this machine. Login Enter the account ID. Enter the account ID. 10:10 Enter the account ID. Check Login Counter…

• Page 308: Adding An Account

  Setup, Registration, and User Management > Job Accounting Adding an Account This section explains how to add a new account. The following entries are required. Account Name Enter the account name (up to 32 characters). Account ID Enter the account ID as many as eight digits (between 0 and 99999999). Restriction This Prohibits printing/scanning or restricts the number of sheets to load.

• Page 309
  Setup, Registration, and User Management > Job Accounting Check the settings. Check the settings and change or add information as needed. [Account Name] Select the item that you want to change. 10:10 Account Name Add — Confirmation Input: Section01 Limit: Account Name Section 01 Del.

• Page 310: Editing And Deleting Accounts

  Setup, Registration, and User Management > Job Accounting Editing and Deleting Accounts This changes the registered account information or deletes the account. Display the screen. Referring to Job Accounting Settings on page 9-61, display the screen. System Menu/Counter. 10:10 User Login/Job… — Job Accounting Settings Use [ ] or [ ] to scroll up and down.

• Page 311
  Setup, Registration, and User Management > Job Accounting Restriction System Menu/Counter. 10:10 System Menu/Counter. 10:10 Account:Section 01 Print (Total) Account Name Section 01 Account ID 00000001 Counter Limit Print (Total) Reject Usage Print (Full Color) Cancel Save Cancel System Menu/Counter. 10:10 Account:Section 01 Use […

• Page 312: Restricting The Use Of The Machine

  Setup, Registration, and User Management > Job Accounting Restricting the Use of the Machine This section explains how to restrict the use of the machine by account or the number of pages available. Set when Adding an Account (see page 9-64) or Editing and Deleting Accounts (see page 9-66). The items that can be restricted differ depending on whether [Individual] or [Total] is selected for Copier/Printer Count on page 9-74.

• Page 313
  Setup, Registration, and User Management > Job Accounting Select the item to limit. [Total] selected for Copier/Printer Count Select the item that you want to change. 10:10 Select the item that you want to change. 10:10 Add — Confirmation Add — Confirmation Account Name Section 01 Scan (Others)

• Page 314: Counting The Number Of Pages Printed

  Setup, Registration, and User Management > Job Accounting Counting the Number of Pages Printed This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job Accounting. A new count can also be started after resetting the count data which was stored for a certain period of time. Types of the counts are as follows.

• Page 315
  Setup, Registration, and User Management > Job Accounting View the number of pages. System Menu/Counter. 10:10 System Menu/Counter. 10:10 Job Accounting Set… — Total Job Accounting Total Job Accounting — Printed Pages Printed Pages Copy (B & W) Scanned Pages Copy (Full Color) FAX TX Pages Copy (Total)

• Page 316: Printing An Accounting Report

  Setup, Registration, and User Management > Job Accounting Printing an Accounting Report Total pages counted at all relevant accounts can be printed as an accounting report. Reports have different formats depending on how the count of copiers and printers is administered. Copier/Printer Count Format When [Total] is selected for Copier/…

• Page 317: Print Reports

  Setup, Registration, and User Management > Job Accounting Print reports. System Menu/Counter. 10:10 User Login/Job… — Job Accounting Settings Job Accounting Print Accounting Report Total Job Accounting Each Job Accounting < Back 9-73…

• Page 318: Job Accounting Default Setting

  Setup, Registration, and User Management > Job Accounting Job Accounting Default Setting Sets default settings related to job accounting. Display the screen. Referring to Job Accounting Settings on page 9-61, display the screen. System Menu/Counter. 10:10 System Menu/Counter. 10:10 User Login/Job… — Job Accounting Settings User Login/Job Accounting — Default Setting Accounting List Apply Limit…

• Page 319
  Setup, Registration, and User Management > Job Accounting Item Description Count by Paper Size This counts the number of pages used for specific paper sizes (for example, count the number of pages printed using A4 paper). You can specify five paper sizes (1 to 5). The number of pages used for the paper sizes specified here can be referenced under [by Paper Size] when counting page use.

• Page 320: Unknown Login User Name Job

  Setup, Registration, and User Management > Job Accounting Unknown Login User Name Job This specifies the behavior for handling the jobs sent with unknown login user names or User ID (i.e. unsent IDs). If the User Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account ID is unknown. Display the screen.

• Page 321: 10 Troubleshooting

  10 Troubleshooting This chapter explains the following topics: Toner Container Replacement ……………………. 10-2 Waste Toner Box Replacement ……………………10-4 Replacing Staples ……………………….10-5 Cleaning …………………………..10-6 Glass Platen ……………………….10-6 Document Processor ……………………..10-6 Solving Malfunctions ……………………….10-8 Responding to Messages ……………………..10-14 Clearing Paper Jams ………………………..

• Page 322: Toner Container Replacement

  Troubleshooting > Toner Container Replacement Toner Container Replacement When the touch panel displays Toner is empty., replace the toner. CAUTION Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns. NOTE For the toner container, always use a genuine toner container. Using a toner container that is not genuine may cause image defects and product failure.

• Page 323
  Troubleshooting > Toner Container Replacement Prepare the new toner container. Install the new toner container. CLICK! 10-3…

• Page 324: Waste Toner Box Replacement

  Troubleshooting > Waste Toner Box Replacement Waste Toner Box Replacement When the touch panel displays Check waste toner box., replace the waste toner box. Remove the old waste toner box. Install the new waste toner box. CLICK! 10-4…

• Page 325: Replacing Staples

  Troubleshooting > Replacing Staples Replacing Staples If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished with staples. NOTE If the Staple Unit runs out of staples, contact your service representative or the place of purchase. Remove the staple cartridge holder.

• Page 326: Cleaning

  Troubleshooting > Cleaning Cleaning Clean the machine regularly to ensure optimum output quality. Caution For safety, always unplug the power cord before cleaning the machine. Glass Platen Wipe the original holder, inside of the document processor, and the glass platen with a soft cloth dampened with alcohol or mild detergent.

• Page 327
  Troubleshooting > Cleaning Wipe the white guide. 10-7…

• Page 328: Solving Malfunctions

  Troubleshooting > Solving Malfunctions Solving Malfunctions The table below provides general guidelines for problem solving. If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following pages. If the problem persists, contact your Service Representative. Symptom Checkpoints Corrective Actions…

• Page 329
  Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Reference Page The background density is — Run [Background Density Adjustment]. 3-55 obtrusive. 9-26 Copies have a moire pattern Is the original a printed photograph? Set the original image to [Photo]. 3-53 (dots grouped together in patterns and not aligned uniformly).
• Page 330
  Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Reference Page Paper often jams. Is the paper loaded correctly? Load the paper correctly. — Turn the orientation 180 degrees 1-16 around in which the paper is positioned. Is the paper of the supported type? Is it Remove the paper, turn it over, and in good condition? reload it.
• Page 331
  Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Reference Page Printouts have vertical lines. Is the slit glass dirty? Clean the slit glass. 10-6 — Run [Laser Scanner Cleaning]. 9-27 Dirt on the top edge or back Check the machine interior. Open the right cover.
• Page 332
  Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Reference Page Part of the image is — Press the System Menu/Counter key, — periodically faint or blurred. [Adjustment/Maintenance], [Service Setting], [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value.
• Page 333
  Troubleshooting > Solving Malfunctions Symptom Checkpoints Corrective Actions Reference Page Perform Tone Curve Over long periods of use, the effects of Run [Tone Curve Adjustment]. 9-27 Adjustment. is displayed. the ambient temperature and humidity can cause color output hues to vary slightly.

• Page 334: Responding To Messages

  Troubleshooting > Responding to Messages Responding to Messages If the touch panel or the computer displays any of these messages, follow the corresponding procedure. Message Checkpoints Corrective Actions Reference Page Acceptable staple count Is the acceptable staple count Press [Continue] to print without —…

• Page 335
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Calibrating… — The machine is under the adjustment to — maintain its quality. Please wait. Cannot connect to Authentication — Set machine time to match the server’s 9-24 Server.* time.
• Page 336
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Cannot staple at the specified Have you selected a position that Press [Paper Selection] to select the — position. cannot be stapled? available paper. Press [Continue] to print without using Staple function.
• Page 337
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Failed to send the file Is the machine and the PC to Check the network and SMB settings. information. which the scanned image is to be — The network cable is connected. sent connected to the network? — The hub is not operating properly.
• Page 338
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Incorrect account ID.* — The account ID was incorrect when — processing the job externally. The job is canceled. Press [End]. Incorrect Login User Name or — The login user name or password was —…
• Page 339
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Machine failure. Is the expansion memory The memory is not installed correctly. 11-3 replaced? Reinstall the memory. — Internal error has occurred. Make a note — of the error code displayed on the touch panel, and contact your Service Representative.
• Page 340
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Paper is left. — Remove paper from the document finisher. — Paper jam. — If a paper jam occurs, the machine will 10-26 stop and the location of the jam will be indicated on the touch panel.
• Page 341
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Removable Memory is full.* — Job is canceled. Press [End]. — Insufficient free space in the removable memory. Delete unnecessary files. Remove originals in the Are there any originals left in the Remove originals from the document —…
• Page 342
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Staple is empty.* Has any of the document finisher If the staples are depleted, the machine 10-5 run out of staples? will stop and the location of staple depletion will be indicated on the touch panel.
• Page 343
  Troubleshooting > Responding to Messages Message Checkpoints Corrective Actions Reference Page Unknown Toner Installed. Is the installed toner container We will not be liable for any damage 10-2 our own brand? caused by the use of third party supplies in this machine. Unknown Toner Installed.
• Page 344
  Troubleshooting > Responding to Messages Code Error Corrective Actions Reference Page 1104 Failed to send the e-mail. Check the e-mail address. 6-20 NOTE: If the address is rejected by the domain, you cannot send the e-mail. 1105 Failed to send via SMB. Select [On] of the SMB settings on the Command Center RX.
• Page 345
  Troubleshooting > Responding to Messages Code Error Corrective Actions Reference Page 3101 Failed to send the e-mail. Check the authentication methods of both the sender and the — recipient. Failed to send via FTP. Check the network. • The network cable is connected. •…

• Page 346: Clearing Paper Jams

  Troubleshooting > Clearing Paper Jams Clearing Paper Jams If a paper jam occurs, the touch panel will display Paper Jam. and the machine will stop. Refer to these procedures to remove the jammed paper. How to read the screen 10:10 Paper jam.

• Page 347: Multi Purpose Tray

  Troubleshooting > Clearing Paper Jams Multi Purpose Tray Follow the steps below to clear paper jams in the multi purpose tray. Inside the Right Cover 1 Follow the steps below to clear paper jams inside the right cover 1. Caution The fixing unit is extremely hot.

• Page 348: Cassette 1

  Troubleshooting > Clearing Paper Jams Cassette 1 Follow the steps below to clear paper jams in cassette 1. Inside the Right Cover 3 Follow the steps below to clear paper jams inside the right cover 3. 10-28…

• Page 349: Cassette 2 Or 3

  Troubleshooting > Clearing Paper Jams Cassette 2 or 3 Follow the steps below to clear paper jams in cassette 2 or 3. Optional Document Finisher Follow the steps below to clear paper jams in the optional document finisher. 10-29…

• Page 350: Optional Document Finisher Staple Jam

  Troubleshooting > Clearing Paper Jams Optional Document Finisher Staple Jam Follow the steps below to clear staple jams in the optional document finisher. Bridge Unit Follow the steps below to clear paper jams in the bridge unit. 10-30…

• Page 351: Document Processor

  Troubleshooting > Clearing Paper Jams Document Processor Follow the steps below to clear paper jams in the document processor. 10-31…

• Page 352
  Troubleshooting > Clearing Paper Jams 10-32…

• Page 353: 11 Appendix

  11 Appendix This chapter explains the following topics: Optional Equipment ……………………….11-2 Overview of Optional Equipment ………………….11-2 PF-470 Paper Feeder (single cassette) ………………..11-3 PF-471 Paper Feeder (double cassette) ………………..11-3 DF-470 Document Finisher ……………………11-3 FAX System (U) FAX Kit ……………………. 11-3 Expansion Memory ……………………..

• Page 354: Optional Equipment

  Appendix > Optional Equipment Optional Equipment Overview of Optional Equipment The following optional equipment is available for the machine. Card Authentication Kit (B) DF-470 Document Finisher IB-50 Gigabit Ethernet Board PF-471 Paper Feeder PF-470 Paper Feeder (double cassette) (single cassette) FAX System (U) FAX Kit Expansion Memory 11-2…

• Page 355: Paper Feeder (Single Cassette)

  Appendix > Optional Equipment PF-470 Paper Feeder (single cassette) An additional cassette identical to the machine’s cassettes can be installed in the machine. Paper capacity and loading method are the same as Cassettes 1. PF-471 Paper Feeder (double cassette) Two additional cassettes identical to the machine’s cassettes can be installed in the machine. Paper capacity and loading method are the same as Cassettes 1.

• Page 356: Verifying The Expanded Memory

  Appendix > Optional Equipment Remove the covers. Replace the memory module. Carefully push the two socket clamps straight up out of the socket, and remove the memory module. Remove the memory module from its package. With the memory connection terminal pointing toward the socket, align the cut-out part with the socket terminal and insert directly in at an angle.

• Page 357: Ib-50 Gigabit Ethernet Board

  Appendix > Optional Equipment IB-50 Gigabit Ethernet Board The Gigabit Ethernet Board provides a high-speed connection for the Gigabit-per-second interface. Since the kit was designed to work with TCP/IP and NetBEUI protocols, in the same way as the main unit, it fulfills the network printing demands on Windows, Macintosh, and UNIX environments.

• Page 358
  Appendix > Optional Equipment Start using an application. Select the desired application and press [Activate]. System Menu/Counter. 10:10 System — Optional Function IC CARD AUTHENTI… Activate Displays details for individual applications. Select [Official] and enter the license key using the numeric keys. System Menu/Counter.

• Page 359: Character Entry Method

  Appendix > Character Entry Method Character Entry Method To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below. NOTE QWERTY, QWERTZ and AZERTY are available as keyboard layouts the same as a PC keyboard. Press the System Menu/Counter key, [Common Settings] and then [Keyboard Layout] to choose desired layout.

• Page 360
  Appendix > Character Entry Method Upper-case Letter Entry Screen Add — Name Input: Limit: Del. Cancel < Back Next > GB0057_E02 Number/Symbol Entry Screen Add — Name Input: Limit: Symbol Del. » & Cancel < Back Next > GB0057_E03 Display/Key Description []/[] To enter a number or symbol not shown in the keyboard, press the…

• Page 361: Entering Characters

  Appendix > Character Entry Method Entering Characters Follow the steps below to enter ‘List A-1’ for an example. Enter ‘List’, (space). Add — Name Add — Name 1, 3 Input: Input: List Limit: Limit: Del. Del. Cancel < Back Next > Cancel <…

• Page 362: Paper

  Appendix > Paper Paper This section explains the paper that can be used in the paper source. For the media type that can be used in the paper source, refer to Media Type Setting on page 9-11. Cassettes Supported paper sizes No.

• Page 363: Basic Paper Specifications

  Appendix > Paper Basic Paper Specifications This machine is designed to print on standard copy paper as used in regular (‘dry’) copiers and page printers such as laser printers. It also supports a variety of other types of paper that conform to the specifications given in this appendix. Be careful when choosing paper.

• Page 364: Supported Paper Sizes

  Appendix > Paper Supported Paper Sizes Paper of the following sizes is supported by the machine. Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner angles must be 90°±0.2°. Multi Purpose Tray Cassette or Multi Purpose Tray A6-R (105 ×…

• Page 365: Moisture Content

  Appendix > Paper Moisture Content Paper moisture content is the ratio of moisture to dryness expressed as a percentage. Moisture affects how the paper is supplied, the electrostatic changeability of the paper, and how the toner adheres. Paper moisture content varies depending on the relative humidity in the room. High relative humidity causes paper to become damp, making the edges expand so it appears wavy.

• Page 366: Special Paper

  Appendix > Paper Special Paper This section describes printing onto special paper and print media. The following paper and media can be used. • Transparencies • Preprinted paper • Bond paper • Recycled paper • Thin paper (from 52 g/m² to 64 g/m² or less) •…

• Page 367
  Appendix > Paper Label Be sure to feed labels from the multi purpose tray. For selecting labels, use extreme care so that the adhesive may not come in direct contact with any part of the machine and that the labels are not easily peeled from the carrier sheet. Adhesives that stick to the drum or rollers and peeled labels remaining in the machine may cause a failure.

• Page 368: Thick Paper

  Appendix > Paper Hagaki Burrs Burrs Before loading Hagaki into the multi purpose tray, fan them and align the edges. If the Hagaki paper is curled, straighten it before loading. Printing onto curled Hagaki may cause jams. Use unfolded Oufukuhagaki (available at post offices). Some Hagaki may still have rough edges developed by a paper cutter on the back side.

• Page 369: Recycled Paper

  Appendix > Paper Recycled Paper Recycled paper must conform to the specifications listed on the page 11-11; however, its whiteness may be considered separately. NOTE Before purchasing recycled paper in volume, try testing a sample to ensure that the print quality. Coated Paper Coated paper is created by treating the surface of the base paper with a coating that provides higher printing quality than plain paper.

• Page 370: Specifications

  Appendix > Specifications Specifications IMPORTANT Specifications are subject to change without notice. Common functions Item Description FS-C8520MFP FS-C8525MFP Type Desktop Printing Method Electrophotographic four color (CMYK) printing using tandem (4) drum system Image Write System Semiconductor laser and electrophotography Paper Weight Cassette 52 to 256 g/m²…

• Page 371: Copy Functions

  Appendix > Specifications Item Description FS-C8520MFP FS-C8525MFP Weight (with toner container) Approx. 176 lb/Approx. 80 kg Space Required (W × D) 34-7/16×23-1/4″, 874×590 mm (Using multi purpose tray) Power Source 120 V Specification Model:120 V (60 Hz, 12 A) 230 V Specification Model: 220 to 240V (50 Hz/ 60 Hz, 7.2 A) Options Paper feeder (single cassette), Paper feeder (double cassette), Document finisher, FAX kit, Expansion memory, Card Authentication Kit, Gigabit Ethernet Board, USB keyboard…

• Page 372: Printer Functions

  Appendix > Specifications Printer functions Item Description FS-C8520MFP FS-C8525MFP Printing Speed Full color Black and White Full color Black and White Letter/A4 20 sheets/min 20 sheets/min 25 sheets/min 25 sheets/min Letter-R/A4-R 14 sheets/min 14 sheets/min 17 sheets/min 17 sheets/min Ledger/A3 10 sheets/min 10 sheets/min 13 sheets/min…

• Page 373: Document Processor

  Appendix > Specifications Document Processor Item Description Original Feed Method Automatic feed Supported Original Types Sheet originals Paper Size Maximum: Ledger/A3, Minimum: Statement-R/A5-R Paper Weight 45 to 160 g/m² (duplex: 50 to 120 g/m²) Loading Capacity 50 sheets (50 to 80 g/m²) maximum Mixed original sizes (auto selection): 30 sheets (50 to 80 g/m²) maximum Dimensions (W) ×…

• Page 374: Document Finisher (Option)

  Appendix > Specifications Document Finisher (option) Item Description Number of Trays 1 tray Paper Size (Non-stapling) Ledger, Legal, Oficio II, A3, B4, Folio, 216 × 340 mm, 8K: 250 sheets Letter, Letter-R, Executive-R, Statement-R, A4, A4-R, B5, B5-R, A5-R, 16K: 500 sheets Supported Paper Weight 45 to 256 g/m²…

• Page 375: Glossary

  Appendix > Glossary Glossary Auto Form Feed Timeout During data transmission, the machine may sometimes have to wait until receiving the next data. This is the auto form feed timeout. When the preset timeout passes, the machine automatically put paper out. However, no output is performed if the last page has no data to be printed.

• Page 376: Ecoprint Mode

  It also supports the HTTP authentication mechanisms along with SSL server and client authentication as well as encryption. KPDL (Kyocera Page Description Language) Kyocera’s PostScript page description language compatible with Adobe PostScript Level 3. 11-24…

• Page 377: Printer Driver

  Appendix > Glossary Multi Purpose (MP) Tray The paper supply tray on the right side of the machine. Use this tray instead of the cassettes when printing onto envelopes, Hagaki, transparencies, or labels. NetBEUI (NetBIOS Extended User Interface) An interface, developed by IBM in 1985, as an update from NetBIOS. It enables more advanced functions on smaller networks than other protocols such as TCP/IP, etc.

• Page 378: Subnet Mask

  Appendix > Glossary Status Page The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper source settings. Subnet Mask The subnet mask is a way of augmenting the network address section of an IP address. A subnet mask represents all network address sections as 1 and all host address sections as 0.

• Page 379: Index

  Index Connecting LAN Cable 2-10 Power Cable 2-11 USB Cable 2-11 Numerics Connection Method 2-sided/Book Original 3-37 Continuous Scan 3-40 Conventions in This Guide 1-14 Copying Address Book Copying Settings Adding a Contact 6-27 Auto % Priority 9-15 Adding a Group 6-31 Auto Paper Selection 9-15…

• Page 380
  Destination 6-17 Checking and Editing 6-25 Handles 2-2, Choosing by One Touch Key 6-19 Help 11-24 Choosing from the Address Book 6-17 Help Screen 3-28 Dest. Check before Send 9-16 Host Name 9-19 Entering a New E-mail Address 6-20 HTTP Entry Check for New Dest.
• Page 381
  LAN Interface 9-23 Originals LDAP Custom Original Size Protocol Detail 9-21 Loading Originals LDAP Security 9-22 Original Auto Detect Legal Information Original Size 3-32 Legal Restriction on Copying Original Size 3-32 Legal Restriction on Scanning Original Size Indicator Plates Login 3-12, 9-63 Original SSLeay License 1-10…
• Page 382
  Printer Settings Sharpness 3-54 Color Setting 9-17 Shortcuts Copies 9-18 Editing and Deleting 3-24 CR Action 9-18 Registering 3-22 Duplex 9-18 Using 3-25 EcoPrint 9-18 Sleep 2-23 Emulation 9-17 Slit Glass Form Feed TimeOut 9-18 SMB Client (Transmission) Gloss Mode 9-18 Protocol Detail 9-21…
• Page 383
  USB Interface 2-4, USB Keyboard Type 9-15 USB Memory Printing Documents Removing Saving Documents USB Memory Slot User Login Administration 9-34 Adding a User 9-38 Editing and Deleting 9-44 Enabling/Disabling 9-36 Group Authorization 9-53 Local User Authorization 9-42 My Panel 9-43 Obtain Network User Property 9-57…
• Page 384
  Index-6…
• Page 386
  Zhongshan Dist., Taipei 104, Taiwan R.O.C. Av.Tambore,1180 Mod.B-09 CEP 06460-000 Phone: +886-2-2507-6709 Tambore-Barueri-SP, Brazil Fax: +886-2-2507-8432 Phone: +55-11-4195-8496 Fax: +55-11-4195-6167 KYOCERA Document Solutions Korea Co., Ltd. 18F, Kangnam bldg, 1321-1, Seocho-Dong, Seocho-Gu, Seoul, Korea KYOCERA Document Solutions Phone: +822-6933-4050 Australia Pty. Ltd. Fax: +822-747-0084 Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113,…
• Page 387
  Fax: +33-1-69853409 KYOCERA Document Solutions South Africa (Pty) Ltd. KYOCERA Document Solutions Espana, S.A. 49 Kyalami Boulevard, Edificio Kyocera, Avda. de Manacor No.2, Kyalami Business Park 1685 Midrand, South Africa 28290 Las Matas (Madrid), Spain Phone: +27-11-540-2600 Phone: +34-91-6318392 Fax: +27-11-466-3050…
• Page 388
  First edition 2012.3 2MYKMEN000…