Led tcl 43p737 инструкция на русском

PDF инструкция  · 20 страниц(ы) английский

Посмотреть все TCL руководства Посмотреть все TCL телевизор руководства

1:1

A5

80g双胶纸

白底黑字

基础说明书72-RT51GS-ERU1B R2

英语+俄语

包含底插：70-STDP80-EAP1A（75P717）

70-STDV83-EAP1A（43~65P717）

俄语部分增加客户要求的内容，以业务确认为准。

制作表编号：HZ2020-08-287R

物 料 编 号：72-RT51GS-XRUCQ

内 容：说明书

型 号：P715

日 期：2020-8-20

BOM编号：H7-50V83NH-URND1AA

ELQ154931F

牌子名称： TCL P717

批 次 号：

机 芯：RT51GS2-RU

制 作 人

PREPARED BY

项目/美工 工程师

ENG.CHECKED BY:

市场业务中心确认

CONFIRM BY：

销 往 RUSSIA 地：

：

TCL电子控股有限公司

运营中心—惠州T V工厂-PE部

产品辅助设计室（外销订单）

43P717/50P717/55P717/65P717/75P717

Mount the Stand ……………………………………………….19

2

Table of Contents

Chapter 1: Introduction

Precautions ……………………………………………………...3

Warning ………………………….……………………………...3

Product …………………………………………………………..3

Power and Plug ……………………………………………….3

Power Cord and Signal Cable ……………………………3

Use Environment ……………………………………………..3

Cleaning ………………………………………………………...3

Sockets …………………………………………………………….4

Remote Control Functions …………………………….……5

RC802V remote control ………………………………………5

RC802N remote control ………………………………………6

Chapter 2: Getting Started

Switching On .............................................................7

Switching Off …………………………………………………….7

Network Connection ………………………………………….8

TV Buttons …………………………………………………..9

Initial Setup …………………………………………………….9

Chapter 3: Basic TV Operations

Accessing Channels ……………………………………….10

By RC802V remote control ……………………………..10

By RC802N remote control……………………………….10

Watching Connected Devices ………………………….10

Adjusting Volume .…..…...…….…...…….…...…….…...10

Accessing Smart TV Homepage ………………………. 01

Accessing TCL Channel …………………………………..10

Using System Settings Menu ……………………………10

Using TV Settings Menu ………………………………….10

Chapter 4: Using More of Your TV

Installing Channels ………………………………..11

Common Inter face……………………………………………..11

Using the Common Interface Function…………………11

Accessing Common Interface Services………………..11

Using Subtitles .……...............…...............................11

Turning On/Off Subtitles …………………………………..11

Enabling Subtitle Languages on Digital TV Channels …….11

Selecting a Subtitle Type on Digital TV Channels …12

Using Teletext ………………………………………………...12

Selecting Decoding Page Language ………………….12

Digital Teletext Language …………………………………12

Using Instant Power On ……………………………………12

Network Wake Up ………………………………………...12

T—Link ……………………………………………………………..12

Enabling or Disabling T-Link ……………………………..12

Using Auto Power On ………………………………………12

Using Auto Standby ………………………………………….12

Using EPG (Electronic Programme Guide)……………..12

Bluetooth Function …………………………………………..13

Time Shift …………………………………………………………13

PVR (Personal Video Recorder)

………..………………….13

T-Cast ……………………………………………………………….14

Reset Shop ………………………………………………………14

……….14

Password in Parental Control …………………………..14

Using the Hands-free TV Voice Control …………..14

Chapter 5: Other Information

Problems & Solutions ………………………………………16

Troubleshooting ……………………………………………..17

Legal Statement ……………………………………………...18

3

IntroductionChapter 1

Precautions

Read all of the instructions before operating the set.

Keep these instructions well for future use.

Warning

Never place a television set in an unstable location. A

television set may fall, causing serious personal injury

or death. Many injuries, particularly to children, can be

avoided by taking simple precautions such as:

— Using cabinets or stands recommended by the

manufacturer of the television set.

— Only using furniture that can safely support the

television set.

— Ensuring the television set is not overhanging the

edge of the supporting furniture.

— Not placing the television set on tall furniture

(for example, cupboards or bookcases)

without

anchoring both the furniture and the television set to

a suitable support.

— Not placing the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

— Educating children about the dangers of climbing on

furniture to reach the television set or its controls

.

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that the fuse may

be in the neutral, and that the mains shall

be disconnected to deenergize the phase

conductors.

If an outside antenna or cable system is connected to

the product, be sure the antenna or cable system is

grounded by a skilled person so as to provide some

protection against voltage surges and built-up static

charges.

If your existing television set is being retained and

relocated, the same considerations as above should be

applied.

Product

• Do not block or cover the ventilation openings on the

back cover.

• Do not push objects of any kind into this unit through

the cabinet slots as they could touch the current

carrying parts or short-circuit parts, resulting in re,

electric shock, or damage to the unit.

• Do not attempt to open the cabinet as this may cause

damage. There are no parts inside you can service by

yourself. Refer all servicing to qualied personnel.

• Do not touch the screen surface with ngers as this

may scratch or mar the TV screen.

• Do not impact the TV screen with hard pressure as

this may damage the TV screen severely.

Power and Plug

Unplug the set under the following conditions:

— If the set will not be used for a long period of time.

— If the power cord or the power outlet/plug is

damaged.

— Follow the instructions to install and adjust the

product. Adjust those controls that are covered in

these operating instructions as improper adjustment

of other controls may result in damage. If this

happens, unplug the set and refer to the service

personnel.

— If the set is subject to impact or has been dropped

and the cabinet has been damaged.

• Where the mains plug or an appliance coupler is

used as disconnect device, the disconnect device

shall remain readily operable.

(*Where an all-pole mains switch is used as the

disconnect device, the switch shall remain readily

operable.)

Power Cord and Signal Cable

• Do not allow anything to rest on or roll over the power

cord and the signal cable.

• Protect the power cord and the signal cable from

being trampled.

• Do not overload the power cord or the power outlet.

• Do not expose the power cord and the signal cable to

moisture.

Use Environment

• Do not place the set on an unstable cart, stand, or

table.

• Place the set on a place that allows good ventilation.

• Do not use the set near damp, and cold areas.

• Do not expose the set to excessive heat such as direct

sunlight, re, or the like and no naked ame sources,

such as lighted candles, should be placed on the

apparatus.

• Do not expose the set to dripping or splashing and

no objects lled with liquids, such as vases, shall be

placed on the apparatus.

• Do not use the set in dusty environments.

• Operating Temperature: 5°C to 35°C (41°F to 95°F)

Operating Humidity: 20% to 80%, non-condensing

Storage Temperature: -15°C to 45°C (5°F to 113°F)

Storage Humidity: 10% to 90%, non-condensing

Cleaning

• Dust the set by wiping the screen and the cabinet with

a soft, clean cloth or some special liquid cleaner.

• Do not apply excessive force to the screen when

cleaning.

• Do not use water or other chemical cleaner to clean

the screen as this may damage the surface of the TV

screen.

All other safety instructions about our TV sets are

also applicable here. (Note: Certain TV model is not

designed to be mounted to the wall.)

4

Introduction

Sockets

Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets

available on all models.

LAN

This socket can be used to connect to external modem or network

access equipment.

HDMI, HDMI (Service port) or HDMI (ARC) socket (input)

The HDMI (High-Denition Multimedia Interface) socket can be

used to connect a Blu-ray player, PC with a compatible video

card installed, certain DVD players or a high-denition compatible

digital satellite decoder. This socket provides an uncompressed

digital connection that carries both video and audio data by way

of an integrated mini-plug cable.

Antenna/Cable input socket

This socket can be used to connect the outside aerial or cable

network.

Satellite input socket

This socket can be used to connect a coaxial cable to receive the

signal from your satellite receiver.

AV adapter socket (input)

This socket can be used to connect the attached AV adapter

cable with VIDEO and AUDIO L & R IN sockets. The AV IN

sockets can be used to connect a range of equipment, including

video recorders, camcorders, decoders, satellite receivers, DVD

players, or games consoles.

Digital audio out (Optical) socket

This socket can be used to connect a compatible digital audio

receiver.

Headphone socket (output)

This socket can be used to connect headphones or stereo

earphones.

Warning: Excessive sound pressure from earphones and

headphones can cause hearing loss.

Common interface slot

This slot can be used to watch encrypted digital TV channels by

inserting a CAM (Conditional Access Module) along with a smart

card provided by a digital TV service operator.

USB 2.0 socket (input)

This socket can be used to connect a USB 2.0 device.

Note: The number of USB sockets on the TV may vary

according to TV model.

LAN

Antenna/

Router / Modem

USB 2.0

Satellite

input

Common interface

Digital

audio out

(Optical)

HDMI

or HDMI

(Service port)

or HDMI

(ARC)

V L R

V L R

V L R

HDD

5

Introduction

Remote Control Functions

Most of your television’s functions are available via the menus that appear on the screen. The remote control(s)

supplied with your set can be used to navigate through the menus and to congure all the general settings.

Notes:

1. Figures and illustrations in this operation manual are provided for reference only and may differ from actual product

appearance. 2. The remote control type may be changed without notice, please refer to your acutal remote conrtol

supplied with your TV. 3. Certain function may not be available for some models, e.g. GUIDE functions are only

available under DTV source. And DTV is not available for certain model. 4. The Google Assistant is not available in

certain languages and countries.

How to Use the Remote Control

When using the Google Assistant button for the rst time, you will be prompted to pair the remote with the TV.

a. Keep the remote control and TV in 1 meter, please follow the on-screen guide for pairing instructions. You can use

the Google Assistant button after activating successfully.

b. This Google Assistant function is only available for content search from certain apps.

c. Set languages in the Settings to your local language or ofcial language to enhance voice search successfully.

Installing Batteries

1. Push to open the back cover as illustrated.

2. Insert two AAA batteries according to the

polarities marked on the battery case.

3. Replace the back cover as illustrated.

RC802V remote control

Standby / quit standby.

To display the TV settings menu.

To access the Smart TV homepage.

To display the Option menu.

▲/▼/◄/►

Navigation direction buttons. The ▲/▼ buttons are also used to change

channels in TV mode.

OK

To conrm an entry or selection. The button is also used to display the

channel list in TV mode.

To return to the previous menu or quit an app.

To select input source.

Press the Assistant button on your remote to talk to the Google Assistant.

(Available only when the network connection works normally.)

To pop up the virtual remote control keyboard when available.

/

To control the volume.

P

+

/P

—

To change channels.

To access Netix. (Not available for some models.)

To access TCL Channel.

Google and Android TV are trademarks of Google LLC.

Note: Certain function may be accessed from the virtual remote control keyboard only,

please press

button on the remote to display it and operate accordingly.

6

Introduction

To switch the sound off and back on.

Standby / quit standby.

Numeric buttons To enter channel numbers or a digit.

To access TCL Channel.

LIST To display the channel list.

To control the volume.

To display program information, if available.

To display the TV settings menu.

P

/

To change channels.

To access the Smart TV homepage.

To display the Option menu.

▲/▼/◄/► Navigation direction buttons.

OK To conrm an entry or selection.

To return to the previous menu or quit an app.

To select input source.

EXIT To exit the Settings menu.

LANG

To select an audio language available for selected

digital TV programme.

GUIDE To toggle the Electronic Program Guide on or off (only available for

digital channels).

TEXT To toggle Teletext on or off.

SUBT.

To select a subtitle language available for selected digital TV

Colored buttons

To select tasks or Teletext pages.

To start fast reverse.

To pause playback.

To start fast forward.

To access the Record menu.

To start playback.

To stop playback.

To access Netix. (Not available for some models.)

RC802N remote control

— Installing Batteries

1. Push to open the back cover as illustrated.

2. Insert two AAA batteries according to the polarities marked on the battery case.

3. Replace the back cover as illustrated.

7

Chapter 2 Getting Started

Switching On

Follow the instructions on this page on how to switch on your TV set

and the remote control before going on to following pages describing

how to use the channel set-up procedure.

1. Insert two AAA batteries in the remote control.

Precautions on using batteries:

— Only use the battery types specied.

— Make sure you use the correct polarity.

— Do not mix new and used batteries.

— Do not use rechargeable batteries.

— Do not expose batteries to excessive heat such as sunshine,

re or the like, throw them in a re, recharge them or try to open

them, as this could cause them to leak or explode.

— Remove the batteries from the remote control if you are not using

it for a long period of time.

— Attention should be drawn to the environmental aspects of battery

disposal.

2. Connect the power cable FIRST to the television, THEN to a mains

socket. (Note: If the power cable is connected to the television,

please only connect the power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not

be connected to a DC supply. If the plug is detached from the ca-

ble, do not, under any circumstances, connect it to a mains socket,

as there is a risk of electric shock.

Note: The gures are for representation only, the location of power

socket of the television may differ depending on the model.

3. Connect an outside aerial to the ANTENNA IN socket at the back

of the TV set.

The aerial socket (75 OHM — VHF / UHF / cable) can be used for

connecting an external aerial or other equipment tted.

Note: If you want to receive the signal from your cable or cable

box, please connect a coaxial cable to the CABLE IN socket at the

back of the TV set.

4. When powered on, the TV will be turned on directly or be in

standby mode.

If the power indicator lights up, the TV set is in standby mode.

Press the

button on the remote control or on the TV set to turn

on the TV.

Switching Off

• To put the TV set into standby mode, press the button on the

remote control. The TV set remains powered up, but with low

energy consumption.

• To switch off the TV set, unplug the mains socket from the mains

outlet.

8

Getting Started

Network Connection

Your TV will require an internet connection to operate all functions. Data usage charges may apply.

Please refer to your Internet Service Provider (ISP) for additional information.

To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service

provider (ISP).

Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.

• Wireless, using the internal wireless and your home wireless network.

Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection

method may be different depending on your actual network conguration. If you have any questions about your

home network, please refer to your ISP.

Connecting to a Wired Network

To connect to a wired network:

1. Ensure you have:

• An Ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet

port

• A high-speed Internet connection

• An Ethernet (LAN) port on the back of the TV

2. Connect your Ethernet cable to the router and to

the Ethernet port on the back of the TV.

3. Use the Network & Internet menu to configure the

TV.

Connecting to a Wireless Network

To connect to a wireless network:

1. Ensure you have:

• A router broadcasting a high-speed wireless

signal

• A high-speed Internet connection

2. Use the Network & Internet menu to configure the

TV.

Note: Please follow below steps to enter the Network & Internet menu.

1. Press

on the remote control to display the Smart TV homepage.

2. Press

▲/

◄/► to move the cursor to

(Settings) on the right top of the screen and press OK to enter the

system settings.

3. Press ▲/▼ to select Network & Internet, then press OK to enter the submenu and follow the on-screen

guidance to set up your network.

Router

Modem Internet

LAN port

Modem Internet

Wireless router

9

Getting Started

Initial Setup

The rst time you switch the set on, the Welcome screen appears, which guides you through the initial setup process.

Follow the on-screen instructions to nish the initial setup process such as selecting the language, connecting to the

network, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the

setup later from the settings menu.

TV Buttons

— Power button

If the batteries in your remote control are run down, you can use the button on your TV set.

The model has only one

button. It may work just as Power on/Standby button, or as a multi-function controller.

You can turn on the TV by pressing the

button at the bottom left of the TV back case.

While the TV is on, the multi-function menu appears by pressing

button on the TV set. More information

about how to use the multi-function menu, please refer to the figure below.

• Press to move the highlight to the next function selection

• Press and hold the button for more than 2 seconds to conrm your selection.

Note:

You can follow the on-screen guide to operate.

Figures and illustrations are provided for reference only and may vary depending on the model.

— MIC switch

The MIC switch is located next to the power button. If you want to use the feature of hands-free TV voice control,

turn on the switch(not available for some models).

10

Chapter 3 Basic TV Operations

Accessing Channels

By RC802V remote control

Using the ▲/▼ buttons: press the ▲/▼ buttons on the

remote control to scroll through the channels.

Using the OK button: press the OK button to display

the channel list and press ▲/▼/◄/► and OK to select

channels.

Using the P

/ buttons : press the P /

buttons

on the remote control to scroll through the channels.

Using the

button: press

to display the virtual

remote control keyboard, then you can use the numeric

buttons or the LIST button to operate accordingly.

By RC802N remote control

Using the numeric buttons: press the corresponding

numeric buttons on the remote control to access the

channels.

Using the P

buttons: press the P

buttons

on the remote control to scroll through the channels.

Using the LIST button: press the LIST button on the

remote control to display the channel list and press

▲/▼/◄/► and OK to select channels.

Watching Connected Devices

Press on the remote control to display the source

list. Press ▲/▼ to select TV or other input sources and

press OK to conrm.

You can also press

on the remote control to display

the homepage, press

▲/

◄/► to move the cursor to

the

(Inputs) area on the right top of the screen, and

press OK to enter. Then press ▲/▼ and OK to select

the input source.

Adjusting Volume

Press the buttons on the remote control to

increase or decrease the volume.

Accessing Smart TV Homepage

Allows you to enjoy Internet Applications (Apps) and

specially adapted Internet websites, and perform system

settings for your TV. You can make controlling with the

TV remote control.

WARNING:

• Congure the network settings before using Smart TV

applications.

• Slow responses and/or interruptions may occur,

depending on your network conditions.

• If you experience a problem using an application,

please contact the content provider.

• According to circumstances of the content provider, an

application’s updates or the application itself may be

discontinued.

• Depending on your country’s regulations, some

applications may have limited service or not be

supported.

• Changes in application content may be made without

prior notice by the service provider.

1. Press

on the remote control to display the Smart

TV homepage.

2. Press ▲/▼/◄/► and OK to enter the desired apps,

functions or settings.

3. Press

to return to the homepage.

4. To exit the homepage, use ▲/◄/► to move the

cursor

to the

(Inputs) area on the right top of the

screen, and press OK to enter. Then press ▲/▼ and

OK to select your desired input source

.

Note: Since the connection with Internet takes time, it’s

recommended that you wait a few minutes to use

the Smart TV feature after activation of TV from

standby.

Accessing TCL Channel

Allows you to enjoy more VOD(Video on Demand)

contents or featured applications.

1. Press

on the remote control to enter TCL

Channel, or access through the TCL Channel icon

on homepage.

2. Press

or to exit.

Note: UI layout of TCL Channel will vary according to

models or countries.

Using System Settings Menu

Allows you to not only adjust device settings, such as

Network & Internet, Accounts & Sign-In and Apps, etc.,

but also set Device Preferences.

1. Press

on the remote control to display the Smart

TV homepage.

2. Press

▲/

◄/► to move the cursor to (Settings) on

the right top of the screen and press OK to enter the

system settings.

3. Press ▲/▼ to choose the items and

press OK to enter.

4. Press

to return to previous interface.

Using TV Settings Menu

Allows you to adjust TV settings, such as picture and

sound.

1. Press

on the remote control to display the TV

settings menu.

2. Press ▲/▼ to select the desired item, then press

OK/► to enter the corresponding submenu.

3. In submenus, press ▲/▼ to select menu options,

then press OK/► to enter the option list, the

adjustment interface, or the corresponding submenu.

4. Press

to return to the previous menu.

5. Press

to close the menu.

Notes:

— You can also press

on the remote control,

select Settings (if available) and press OK to

enter the TV settings menu. Some options may

not be available for certain signal sources.

— Setting LED motion clear on will make fast

moving images clearer by controlling the LED

backlight, but the picture will be darker and more

ickering than with LED motion clear off .

11

1. Following the directions printed on the CAM, gently

insert the module into the common interface slot on

the TV.

2. Push the module in as far as it will go.

3. Turn on the TV and wait for the common interface

function to be activated. This may take several

minutes.

Note: Do not remove the CAM from the slot.

Removing the module will deactivate the

digital services.

Accessing Common Interface Services

After inserting and activating the CAM, press

on the

remote control, select Channel > Common Interface

and press OK/► to enter. This menu option is only

available if the CAM is correctly inserted and activated.

On-screen applications and content are provided by

your digital TV service operator.

Note: This feature is only available under DTV source.

Using Subtitles

You can enable subtitles for each TV channel.

Subtitles are broadcast via Teletext or DVB-T/DVB-T2/

DVB-C/DVB-S/DVB-S2 digital broadcasts. With digital

broadcasts, you have the additional option of selecting a

preferred subtitle language.

Note: Some options are available only when Subtitle is

set to on.

Turning On/Off Subtitles

1. Press on the remote control, select Channel >

Subtitle and press OK/► to enter.

2. Select the Subtitle option, and press OK to toggle

between on or off.

3. Press

to close the menu.

Enabling Subtitle Languages on Digital TV

Channels

1. Press on the remote control, select Channel >

Subtitle > Digital subtitle language 1st and press

OK/► to enter.

2. Press ▲/▼ to select a subtitle language as your

preferred language and press OK to conrm.

3. Press ▲/▼ to select Digital subtitle language 2nd

and press OK/► to enter.

4. Press ▲/▼ to select a secondary subtitle language

and press OK to conrm.

5. Press

to close the menu.

Installing Channels

This section describes how to search and store

channels automatically. This may be done in either of

the cases below:

— you are prompted that there are no channels in TV

mode;

— you want to update your channels.

1. In TV mode, press

on the remote control and

select Channel > Channel scan. Press OK/► to

enter.

2. The TV installs and arranges channels according

to your country or region. Press ▲/▼ to select

Country/Region, and press OK/► to enter. Enter

the default password 1234 or your own password in

case you have changed the password in the System

> Lock menu. Press ▲/▼ to select your country or

region and press OK to confirm.

3. Press ▲/▼ to select Automatic search and press

OK/► to enter.

4. Press ▲/▼ to select Tuner mode and press ◄/► to

select Cable, Antenna or Satellite. (Note: Satellite

option is available only in selected models.)

5. Press ▲/▼ to select other options and use ◄/► to

configure.

6. After configuration is completed, press ▼ to select

Search and press OK to start scanning channels.

7. The channel search may take a few minutes. After

the automatic search, channels are arranged in a

preset order. If you wish to hide or swap channels,

press

on the remote control, select Channel >

Channel organizer and press OK/► to enter.

Note: If the channel search retrieved only the analogue

channels it could be caused by poor broadcasting

and therefore is not covered by manufacturer

warranty. Manufacturers cannot be held

responsible for lack of or poor broadcasting in

some areas.

Common Interface

(* not available for some models)

Encrypted digital TV channels can be decoded with a

Conditional Access Module (CAM) and a card provided

by a digital TV service operator.

The CAM may enable several digital services,

depending on the operator and services you choose

(for example, pay TV). Contact your digital TV service

operator for more information about services and terms.

Using the Common Interface Function

WARNING: Switch off your TV before inserting a

CAM. Be sure to follow the instructions described

below. Wrong insertion of a CAM may damage both

the module and your TV.

Chapter 4 Using More of Your TV

12

Using More of Your TV

2. The desired controller, such as a smartphone, is

connected to the same network as your TV;

3. An app which supports network waking up function,

such as YouTube, has been installed into the

controller;

4. Networked standby is set to on in the Network &

Internet menu under homepage. Press

on the

remote control, select

(Settings) > Network &

Internet, use ▼ to select Networked standby and

press OK to activate it.

When the TV is in networked standby mode, you can

use the app to wake up the TV remotely.

Notes:

— This feature is disabled if you press and hold the

button on the remote control and conrm to

shut the TV down

— Before using the feature of network wake up, make

sure

>

(Settings) > Device Preferences >

Power > Instant power on is set to on.

T-Link

Use this function to search for CEC devices connected

to the HDMI sockets in your TV and enable auto power

on and auto standby between the TV and CEC devices.

Enabling or Disabling T-Link

1. Press on the remote control, select System >

T-Link and press OK/► to enter.

2. Select the T-Link option, and press OK to toggle

between on or off.

3. Press

to close the menu.

Using Auto Power On

Enables the TV to automatically power on when you

power on a CEC device (e.g. DVD) with the device’s

remote. Press OK to turn it on to enable this function.

Using Auto Standby

Enables all CEC devices to automatically go to the

standby mode when you turn off the TV with the TV

remote. Press OK to turn it on to enable this function.

Note: The CEC functions depend on the devices

connected and it is possible that some

devices may not interoperate correctly when

connected to this TV. The user manual or

the manufacturer of the problematic devices

should be consulted for further information.

Using EPG (Electronic Programme Guide)

EPG is an on-screen guide that displays scheduled

digital TV programmes. You can navigate, select and

view programmes.

Selecting a Subtitle Type on Digital TV

Channels

1. Press on the remote control, select Channel >

Subtitle > Subtitle type and press OK/► to enter.

2. Press ▲/▼ to select a subtitle type and press OK to

conrm. You can select Hearing impaired to display

the hearing impaired subtitles with your selected

language.

3. Press

to close the menu.

Using Teletext

Selecting Decoding Page Language

1. Press on the remote control, select Channel >

Teletext > Decoding page language and press

OK/► to enter.

2. Press ▲/▼ to select a proper type of language in

which Teletext will display and press OK to conrm.

3. Press

to close the menu.

Digital Teletext Language

On digital TV channels, depending on the broadcaster,

you may be able to enjoy a service with multiple initial

Teletext pages in different languages. This function

allows you to select an available language as primary

language, which relates to different initial Teletext

pages.

1. Press

on the remote control, select Channel >

Teletext > Digital teletext language and press

OK/► to enter.

2. Press ▲/▼ to select a language and press OK to

conrm.

3. Press

to close the menu.

Using Instant Power On

It enables you to turn on your TV faster from standby

mode than turning this function off, but it will also

increase standby power consumption .

1. Press

on the remote control to display the

homepage,

Press ▲/◄/► to select

(Settings)

>

Device Preferences > Power > Instant power

on and press OK to toggle between on and off.

2. Press

repeatedly to return to the homepage.

Network Wake Up

This function allows you to turn on your TV from standby

mode via a network. To use this function, please make

sure:

1. Your TV is connected to an effective wireless home

network;

13

Using More of Your TV

device to nd frequency with less interferences and if

you continue to face issues you should move closer

to TV or increase space between TV and source of

interferences.

The Bluetooth word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by TCL is under license. Other trademarks

and trade names are those of their respective owners.

Time Shift

(* not available for some models)

Note: this option is available only when Time shift is

set to on: press

on the remote control, press ▲/▼

to select Settings> Channel> Time shift, press OK to

turn it on.

Allows you to pause, fast forward and rewind live TV,

so you don’t have to miss any part of your favourite

programs. Before you use the function, connect

a USB drive to the TV rst. For the rst time, you

should complete the disk setup for the USB drive.

Press

on the remote control and select Time shift,

then press OK/► to confirm.

1. Follow the directions on the screen to do the disk

setup if you use time shift for the first time.

2. After the disk setup is done, time shift will start, and

the time shift menu displays on the screen.

3. When the time shift menu disappears and only the

timing of the time shift remains on the screen, you

can press OK to call out the time shift menu and

operate according to the on-screen prompt.

4. Press

button on the remote control stop the time

shift and exit.(For RC802V,you can nd

button on

the virtual remote control keyboard.)

Notes:

— Before you plug the USB drive to TV, make sure

you have backed up the data on the drive to avoid

unforeseen malfunction and data loss.

— We recommend that you use a USB drive with at

least 1GB free space and a disk speed faster than

5.0MB/sec.

— The bigger the USB drive free space for time shift,

the bigger the recording length.

Quick Access of Time Shift

Insert a USB disk, press PAUSE( ) on the remote

control, it will access time shift automatically

(Available for RC802N remote control only).

PVR (Personal Video Recorder)

(* not available for some models)

Allows you to record your favourite TV programmes.

Before you use the function, connect a USB drive to

1. Press

on the remote control, select Channel

> EPG and press OK/► to enter, the Programme

Guide menu will appear, which allows you to get

information about the current or next programme

playing on each channel. Navigate through the

different programmes using the ▲/▼/◄/► buttons

on the remote control.

2. Use the related buttons shown at the bottom of the

screen to view EPG.

— Programme lter: Programme guide lter for

digital TV programmes.

• Press

to display the type list of the

programme.

• Navigate through the different types using the

▲/▼ buttons on the remote control.

• Select one or more types, which you want to

highlight from the type list, press OK to select or

deselect. A checkmark will appear to the right of

the type when selected.

— Custom schedule: Press ▲/▼ to select a

programme, then press the RED button to set

the schedule, press OK to enter and use ▲/▼

buttons to select Schedule reminder or Schedule

recording.

— Select date: Press the GREEN button to select

date.

— Schedule list: Press the YELLOW button to view

your schedule list.

Note: If using RC802V remote control to access the

color buttons, you need to press

button on the

remote control to display the virtual remote control

keyboard rst.

3. Press

repeatedly to exit EPG.

Bluetooth Function

(* not available for some models)

Bluetooth

®

is a wireless technology standard for

exchanging data over short distance between Bluetooth

devices. You can connect Bluetooth audio device,

mouse or keyboard via the TV.

1. Press

on the remote control to display the

homepage,

Press ▲/◄/► to select

(Settings)

>

Remotes & Accessories and press OK to enter.

2. Select Add accessory and press OK to enter.

The TV will search nearby Bluetooth devices

automatically.

3. Select an available device, press OK and follow the

guides on the screen to connect it.

Note: Bluetooth technology (if available in your TV) uses

2.4GHz frequency thus close proximity to Wi-Fi access

points, routers or microwave ovens might interfere with

Bluetooth audio streaming. If you face interruptions

in audio reception, you should restart your Bluetooth

14

code on the TV screen and download T-Cast.

Note: Make sure the smart device and your TV are

in the same home LAN (local area network) or

network segment to use TV remote function.

Reset Shop

Allows you to reset the TV to factory default settings.

1. Press

on the remote control to display the

homepage,

Press ▲/◄/► to select

(Settings)

>

Device Preferences > Reset and press OK to

enter.

2. Press ▲/▼ to select Factory data reset

and press

OK to enter. Then select

Erase everything

and

press

OK to confirm.

3. Enter 1234 or the PIN according to the on-screen

prompt.

4. Select OK and press OK to conrm.

5. The Initial setup wizard appears. Follow the

instructions in the section Initial setup.

Netix Settings

Netix provides on-demand movies and TV shows

delivered via the Internet. Netix is available in certain

countries.Unlimited membership is required. More

information can be found at www.netix.com <http://

www.netix.com/> .

Note: you can directly access Netix via clicking the

Netix button on the remote control.

Password in Parental Control

• The default password is 1234. You can change it to a

new one.

• The super password is 0423. If you forget your code,

enter the super password to override any existing

codes.

Using the Hands-free TV Voice

Control

(* not available for some models)

Before using the hands-free TV voice control, connect

the TV to the network and make sure it can access the

Google website rst. Then follow the steps below to

access.

1. Turn the built-in MIC switch (next to the power button)

to on before using this function.

2. Access the Android TV homepage by pressing

on

the remote control.

3. Select

(Settings) > Device Preferences > Google

Assistant > «Ok Google» detection and press OK

the TV rst.

Note: The feature is available only in selected products

and, due to specific TV network limitations and country

technical requirements, might not be available in

product or place of installation. Feature might also be

blocked by TV network due to copyright protection (HD

content, recording protection). Please use

on the

remote control to check if the feature is available in your

product.

1. Press

on the remote control and select PVR.

2. Press OK/► to enter and select Record. It starts to

record automatically.

3. Press blue button to access Settings and use

▲/▼/◄/► to adjust the recording duration.

4. Press OK or

to stop recording manually, the

recorded file will be saved. In normal operation, the

recording will stop automatically when the recording

duration expires.

Note: you can nd

and color buttons on the virtual

remote control keyboard for RC802V.

5. In recording, the PVR mini pane will also show on

the screen to indicate the recording progress.

6. To watch the recorded programme, exit PVR mode

first.Press

and select PVR > PVR list, then select

the related record file. Press OK to play. (It is the

same if you record a digital radio programme.)

Notes:

— This feature is available only for digital non encrypted

channels.

— Before you connect the USB drive to the TV, make

sure you have backed up the data in the drive to avoid

the loss of your important data due to unforeseen

malfunction.

— The bigger the USB drive free memory for the PVR

function, the bigger the recording length.

— If you want to change channel or signal source during

recording, store the recording data before changing the

channel or source.

— The TV cannot play files normally if the parameters

of the file exceed the limitations of the system, the file

format is not supported, the file is damaged, or the file

cannot be decoded.

— Do not disconnect the USB drive when the system is

reading a file or transmitting data, otherwise the system

or the drive may be damaged.

T-Cast

T-Cast lets you enjoy plenty of videos

,

rich of

applications, and share great contents on large

screen. It also allows you to turn a smart device

into a sophisticated remote control, providing more

features than your normal TV remote control. You

can then control your TV through your smart device.

Follow the on-screen instructions to scan the QR

Using More of Your TV

15

to turn it on. You can also set it by selecting

(Set-

tings) > Quick Settings > «Ok Google» detection,

if available.

4. Say “OK Google” to activate it.

Notes:

— The availability of hands-free TV voice control

depends on your region/country/language and your

model. For details, please refer to your local dealer.

— A quiet surrounding is required for better function

when using it. The recommended distance for using

the hands-free TV voice control is within 2 meters in

front of TV set.

— Turn the built-in MIC switch to off if you are not going

to use it. Or set the «Ok Google» detection to off.

— Standby power consumption will increase because

the built-in MIC is always listening when the Google

Assistant or voice control with the built-in MIC is

enabled.

Using More of Your TV

16

Chapter 5 Other Information

6. Video stops playing midway.

— Mistakes may occur when videos are copied or

compressed, so they may automatically stop playing

during playback.

7. What should I pay attention to, when I do

software updating?

— No power cuts when software updating;

— Avoid any operations with your remote control when

software updating;

— Depending on your internet connection speed, the

software updating process may take some time.

8. There are no distinct changes of TV interface

after software updating.

— Under certain conditions, software updating may not

only update or add new functions but also improve

the performance of the TV set, without distinct

changes of interface. Also, there may be no changes

to the user interface at all.

9. What should I do when software updating

process stops due to a sudden power-off?

— If you do software updating by USB, do not pluck the

USB from your TV, and restart your TV to continue

software updating; If you do software updating

by Network, also restart your TV and check if it is

functioning correctly.

10. With a USB device being inserted into the TV in

advance, I am prompted that no USB devices are

detected after I access Media, why?

— There may be something wrong with your portable

hard drive(s), damaged or with low voltage. It’s

recommended to provide an additional power supply

to the hard drive(s).

11. External device cannot be recognized.

— Some external devices (e.g. webcam, smart phone,

tablet, game handle, and external wireless adapter)

may not be compatible with the TV and cannot be

supported for certain functions (nScreen, wireless

display, gesture control, face recognition, if any).

Please try a similar device. If it does not work,

contact your local dealer.

12. Voice search does not work.

— Check if your remote control has been successfully

paired with your TV.

— Check if the language setting is correct.

— Check if Google server is available and stable.

1. Fail to link to the network.

— Check if your TV is connected with the network;

— Reboot your TV;

— Consult your internet service provider, to conrm

if access of your router is supported. Refer to the

operation manual of your router.

— Make sure your TV is connected to a router, and

make sure your router is powered on. Check that

your router/modem has an internet connection, and

that your Ethernet cables/wireless connection is OK.

Test your connection with a computer to make sure it

is OK. Should the problem persist, contact customer

service.

2. The video could not be played smoothly.

— Videos from your USB ash drive — It may result

from data transmission, or its code ow is far beyond

the supported formats of this TV set.

— Videos downloaded from internet, or online videos.

a. It may be caused by the lower bandwidth of your

network. A high network speed is required to

handle online videos.

b. Peak internet usage times may affect the

bandwidth.

c. Check if any other computers on the same

network are also operating, as they may be using

up bandwidth. Especially if they are downloading

or playing on-line videos.

d. The video may not be smooth itself, it is not the

problem of your TV or network.

3. When two portable hard drives are connected

with the TV at the same time, they will not be

recognized sometimes.

— All portable hard drives consume a lot of power,

which may result in power supply problems. We

recommend inserting only one hard drive, or a low

power consumption portable hard drive.

4. The video from a portable hard drive (USB) is

playing with no sound.

— The audio format of the video in your portable hard

drive is not supported by the TV player.

5. Some videos fail to play.

— The formats of the videos may not be supported

by the TV, especially videos shot by certain kinds

of cameras, generally with their private protocol of

formats, which are not compatible with your TV.

Problems & Solutions

Note: problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected

TV models can disregard them.

17

Other Information

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

Snowy dots and interference

If the antenna is located in the fringe area of a television

signal where the signal is weak, the picture may be

marred by dots. When the signal is extremely weak,

it may be necessary to install a special antenna to

improve the reception.

1. Adjust the position and orientation of the indoor/

outdoor antenna.

2. Check the connection of antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may

happen.

Ignition

Black spots or horizontal streaks appear, or the picture

utters or drifts. This is usually caused by interference

from car ignition system, neon lamps, electric drills, or

other electrical appliance.

Ghost

Ghosts are caused by the television signal following

two paths. One is the direct path, the other is reected

from tall buildings, hills, or other objects. Changing the

direction or position of the antenna may improve the

reception.

Radio frequency interference

This interference produces moving ripples or diagonal

streaks, and in some case, loss of contrast in the

picture. Find out and remove the radio interference

source.

* To bring you better visual experience, please remove

all labels from TV front panel and screen before use.

No picture, no sound

1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make

sure it is working or turned on.

3. Power plug is in a bad contact with the outlet.

4. Check the signal source.

No color

1. Change the color system.

2. Adjust the saturation.

3. Try another channel. Black-white programme may

be received.

Remote control does not work

1. Change the batteries.

2. Batteries are not installed correctly.

No picture, normal sound

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the

button to increase volume.

2. Volume is set to mute, press the

button to

restore sound.

3. Change the sound system.

4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,

daylight lamps and hair driers. Adjust the antenna to

minimize the interference.

18

Other Information

Legal Statement

[Legal Statement] of TCL — manufacturer of this TV set

Due to the various capabilities of products featuring

the SmartTV — Services, as well as limitations in the

available content, certain features, applications, and

services may not be available on all devices or in all

territories. Some features on SmartTV may also require

additional peripheral devices or membership fees that

are sold separately. Please visit our website for more

information on specic device information and content

availability. The services and availability of content

through SmartTV are subject to change from time to

time without prior notice.

All content and services accessible through this device

belong to third parties and are protected by copyright,

patent, trademark and/or other intellectual property

laws. Such content and services are provided solely

for your personal noncommercial use. You may not

use any content or services in a manner that has

not been authorized by the content owner or service

provider. Without limiting the foregoing, unless expressly

authorized by the applicable content owner or service

provider, you may not modify, copy, republish, upload,

post, transmit, translate, sell, create derivative works,

exploit, or distribute in any manner or medium any

content or services displayed through this device.

You expressly acknowledge and agree that use of the

device is at your sole risk and that the entire risk as to

satisfactory quality, performance and accuracy is with

you. The device and all third party content and services

are provided “as is” without warranty of any kind,

either express or implied. TCL expressly disclaims all

warranties and conditions with respect to the device and

any content and services, either express or, implied,

including but not limited to, warranties of merchantability,

of satisfactory quality, tness for a particular purpose, of

accuracy, of quiet enjoyment, and non-infringement of

third party rights. TCL does not guarantee the accuracy,

validity, timeliness, legality, or completeness of any

content or service made available through this device

and does not warrant that the device, content or services

will meet your requirements, or that operation of the

device or services will be uninterrupted or error-free.

Under no circumstances, including negligence, shall

TCL be liable, whether in contract or tort, for any direct,

indirect, incidental, special or consequential damages,

attorney fees, expenses, or any other damages arising

out of, or in connection with, any information contained

in, or as a result of the use of the device, or any content

or service accessed by you or any third party, even if

advised of the possibility of such damages.

Third party services may be changed, suspended,

removed, terminated or interrupted, or access may be

disabled at any time, without notice, and TCL makes no

representation or warranty that any content or service

will remain available for any period of time. Content

and services are transmitted by third parties by means

of networks and transmission facilities over which TCL

has no control. Without limiting the generality of this

disclaimer, TCL expressly disclaims any responsibility or

liability for any change, interruption, disabling, removal

of or suspension of any content or service made

available through this device. TCL may impose limits

on the use of or access to certain services or content,

in any case and without notice or liability. TCL is neither

responsible nor liable for customer service related to

the content and services. Any question or request for

service relating to the content or services should be

made directly to the respective content and service

providers.

Notes:

•

If the table stand has been assembled, just ignore the following instructions.

•

Follow the instructions accordingly based on the table stand supplied to you.

•

Graphics contained within this publication are for representation only.

•

Keep the screws and plastic parts away from grease and organic solvents to avoid damage,

especially during the assembly process.

•

During installation, lay some soft materials below the screen to avoid scratch and damage to

the screen.

•

When the TV faced down, do not impact the screen with sharp edges to avoid scratching the

43P717/50P717/55P717/65P717

screen.

19

Other Information

2

1

Mount the Stand