Лего оптимус прайм инструкция по сборке

Manual

Rating

Let us know what you think about the Lego set 10302 Creator Optimus Prime by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Frequently Asked Questions

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

There is a Lego brick missing from my set, where can I order a spare one? Verified
Lego has a service where you can order separate bricks or contact them when a brick is missing from your set. Have a look at their website for more information.

This was helpful (4125)

How can I prevent my Lego toys from discolouring? Verified
The two biggest contributers to the discolouring of the plastic of Lego toys are long term exposure to sunlight and cigarette smoke. Try to minimise these when storing your Playmobil.

This was helpful (1384)

What is the best way to clean my Lego bricks? Verified
Lego advises to clean the bricks by hand with some water (no warmer than 40°C) and a mild detergent. Never place the bricks in a washing machine or dishwasher. Let the bricks air-dry afterwards. Electric parts can only be cleaned with dry cloth.

This was helpful (1269)

After I build a new Lego set I always have a few small pieces left. Did I forget to use them? Verified
No, many new Lego sets provide spares for the smaller pieces.

This was helpful (1027)

What is the best way to apply stickers on Lego? Verified
To be able to reposition stickers it’s a good idea to apply some glass cleaner on the location you want to put the sticker. When the sticker is in right spot, let it dry and it will stick.

This was helpful (910)

Where can I find a part list of my Lego set? Verified
Many modern Lego instructions include a part list at the end of the booklet. In the case of multiple booklets the list might be found in the middle of the PDF.

This was helpful (865)

Can Lego and Duplo bricks be used in combination with each other? Verified
Yes, Lego and Duplo bricks are compatible. Lego bricks fit on the Duplo bricks with the hollow studs. Duplo bricks fit best on larger Lego bricks and could come loose form smaller Lego bricks.

This was helpful (796)

From what age is Lego suited to play with? Verified
Most Lego sets are suited to play with from age 4 and up, because of the small parts they include. The special Duplo theme is suited for children aged 1,5 and up. The recommended age is always mentioned on the box.

This was helpful (779)

I have a Lego Creator 3in1 set, where can I find the instructions for the alternative models? Verified
We have combined the instructions for the separate models into one single PDF. Scroll through the PDF to view them all.

This was helpful (92)

Introduction: Optimus Prime Lego Instructions

This is a robot and I like the way it looks.

Step 1:

Get these pieces.

Step 2:

Attach the red grabber pieces to the black cylinders. Then put the black cylinders onto blue 1-dot pieces. Put the blue 1-dot pieces onto into the 1-dot pieces with the side dot. Put the slanted blue pieces on top.

Step 3:

Put a red grabber piece onto the side dot of the 1-dot plus side dot piece. Put a hose end piece into the red grabber and then clip a clipper onto the hose piece.

Step 4:

Take a gray 2×2 piece and stack two red piece with a white circle in the middle.

Step 5:

Put the stack of the two red pieces with the white circle in the middle, on one corner.

Step 6:

Put the gray 2×2 with the red and white stack onto the pieces you made before by putting the other side of the clippers onto the gray 2×2.

Step 7:

Put 2 thin 1-dot pieces on the bottom of the gray 2×2.

Step 8:

Put a thin 1-dot piece that is as large as a 2-dot piece but only has 1 dot in the middle into the bottom thin 1-dot piece.

Step 9:

Put another thin 2×2 onto the piece that looks a thin 2-dot but only has one dot in the middle.

Step 10:

Take two 3-dot wing pieces and one corner piece with 2 dots on each side.

Step 11:

Put the wing pieces onto the corner piece.

Step 12:

Attach the corner piece with the two wing pieces onto the bottom of the thin gray 2×2.

Step 13:

Put two slanted vent pieces on the wing pieces.

Step 14:

Put a thin two dot piece on the back of the wing pieces.

Step 15:

Get two thick 2-dot hinge pieces.

Step 16:

Put the two thick 2-dot hinge pieces onto the thin 2-dot piece.

Step 17:

Put two corner pieces with two dots on each side onto the thick 2-dot hinge pieces.

Step 18:

Put two 1-dot slanted pieces onto the corner pieces with two dots on each side.

Step 19:

Put two wing pieces onto the slanted pieces.

Step 20:

Put two smaller 1-dot slanted pieces onto the wing pieces.

Step 21:

Put two glowing blue slant pieces onto the small 1-dot slant pieces.

Step 22:

Put two thin 2-dot pieces onto the back of the wing pieces.

Step 23:

It is finished! Here is Optimus Prime!