Лобзик макита jv0600k инструкция на русском

• INSTRUCTION MANUAL
  Jig Saw
  ENGLISH (Original instructions)
  JV0600
  011955
  DOUBLE INSULATION
  IMPORTANT: Read Before Using.   1

• ENGLISH (Original instructions)
  SPECIFICATIONS
  Model                               JV0600
  Length of stroke                      23 mm
  Blade type                           B type
  Wood                       90  mm
  Max. cutting capacities
  Mild steel                  10 mm
  -1
  Strokes per minute (min )               500 -  3,100
  Overall length                        236 mm
  Net weight                            2.4 kg
  Safety class                           /II
  • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
  • Specifications may differ from country to country.
  • Weight according to EPTA-Procedure 01/2003
  END201-5
  Symbols                                  Sound pressure level (L pA) : 85 dB(A)
  The following show the symbols used for the equipment.   Sound power level (L WA) : 96 dB(A)
  Be sure that you understand their meaning before use.   Uncertainty (K) : 3 dB(A)
  ?  Read instruction manual.             Wear ear protection
  ? DOUBLE INSULATION                                         ENG900-1
  Vibration
  ?  Only for EU countries     The vibration total value (tri-axial vector sum) determined
  Do not dispose of electric  equipment   according to EN60745:
  together with household waste material!
  In observance of  European Directive   Work mode : cutting boards   2
  2002/96/EC on  waste electric and   Vibration emission (a h,B) : 10.5 m/s
  2
  electronic  equipment  and  its  Uncertainty (K) : 1.5 m/s
  implementation in accordance with   Work mode :    cutting sheet metal
  national law, electric  equipment that   Vibration emission (a h,M) : 5.5 m/s 2
  have reached the end of their life must   Uncertainty (K) : 1.5 m/s 2
  be collected separately and returned to                   ENG901-1
  an environmentally compatible recycling   •   The declared vibration emission value has been
  facility.                      measured in accordance with the standard  test
  ENE019-1   method and may be used for comparing one tool
  Intended use                             with another.
  The tool is intended for the sawing of wood, plastic and   •   The declared vibration emission value may also be
  metal  materials. As a result  of  the extensive accessory   used in a preliminary assessment of exposure.
  and saw blade    program, the tool can be used for many
  purposes and is very well suited for curved or circular cuts.   WARNING:
  ENF002-1   The vibration emission during actual use of  the
  Power supply                          •
  The tool should be connected only to a power supply of   power tool  can  differ from the declared emission
  the same voltage as indicated on the nameplate, and can   value depending on the ways in which the tool is
  only be operated on single-phase AC supply. They are   used.
  double-insulated in accordance with European Standard   •   Be sure to identify safety measures to protect the
  and can, therefore, also be used from sockets without   operator that  are  based on an  estimation  of
  earth wire.                              exposure in the actual conditions of use (taking
  ENG905-1   account of all parts of the operating cycle such as
  Noise                                    the times when the tool is switched off and when it
  The typical A-weighted noise level determined according   is running idle in addition to the trigger time).
  to EN60745:
  2

• ENH101-15   you to lose control.
  For European countries only          Electrical safety
  EC Declaration of Conformity          4.   Power tool plugs must match the outlet. Never
  We  Makita  Corporation  as  the  responsible  modify the plug in any  way. Do not use any
  manufacturer declare that the following  Makita   adapter plugs with earthed (grounded) power
  machine(s):                              tools. Unmodified plugs and matching outlets will
  Designation of Machine:                  reduce risk of electric shock.
  Jig Saw                               5.   Avoid body contact with earthed or grounded
  Model No./ Type: JV0600                  surfaces such as pipes, radiators, ranges and
  are of series production and             refrigerators.  There is an increased risk of
  Conforms to the following European Directives:   electric shock if your body is earthed or grounded.
  2006/42/EC                         6.   Do not expose  power tools to rain or  wet
  And are manufactured in accordance with the following   conditions. Water  entering a  power tool  will
  standards or standardised documents:     increase the risk of electric shock.
  EN60745                            7.   Do not abuse the cord. Never use the cord for
  The technical documentation is kept by our authorised   carrying, pulling or unplugging the power tool.
  representative in Europe who is:         Keep cord away from heat, oil, sharp edges or
  Makita International Europe Ltd.      moving parts. Damaged or entangled cords
  Michigan Drive, Tongwell,             increase the risk of electric shock.
  Milton Keynes, Bucks MK15 8JD, England   8.   When operating a power tool outdoors, use an
  extension cord suitable for outdoor use. Use of
  18.11.2010                 a cord suitable for outdoor use reduces the risk of
  electric shock.
  9.   If operating a power tool in a damp location is
  unavoidable, use a residual current device
  000230                                   (RCD) protected supply. Use of an RCD reduces
  Tomoyasu Kato
  Director                  the risk of electric shock.
  Makita Corporation         10.  Use of power supply  via a RCD  with  a rated
  3-11-8, Sumiyoshi-cho,         residual current  of 30mA or less is always
  Anjo, Aichi, 446-8502, JAPAN     recommended.
  Personal safety
  GEA005-3   11.  Stay alert, watch what you are doing and use
  common sense when operating a power tool.
  General Power Tool Safety                Do not use a power tool while you are tired or
  Warnings                                 under the  influence of drugs, alcohol or
  WARNING Read all safety  warnings and all   medication.  A  moment of inattention while
  operating power tools may result  in  serious
  instructions. Failure  to  follow the warnings and   personal injury.
  instructions may result in  electric shock,  fire and/or   12.  Use personal protective equipment.  Always
  serious injury.
  wear eye protection. Protective equipment such
  Save all warnings and                    as dust mask, non-skid safety shoes, hard hat, or
  instructions for future reference.       hearing protection used for appropriate conditions
  will reduce personal injuries.
  The  term "power  tool" in  the warnings refers  to your   13.  Prevent unintentional starting. Ensure the
  mains-operated (corded) power tool or battery-operated   switch is in the off-position before connecting
  (cordless) power tool.                   to power source and/or battery pack, picking
  Work area safety                         up or carrying the tool. Carrying power tools with
  1.   Keep work area clean and well lit. Cluttered or   your finger on the switch or energising power tools
  dark areas invite accidents.         that have the switch on invites accidents.
  2.   Do not operate power tools  in explosive   14.  Remove any adjusting key or  wrench before
  atmospheres, such as  in the presence of   turning the power tool on. A wrench or a key left
  flammable liquids, gases or dust. Power tools   attached to a rotating part of the power tool may
  create sparks which may ignite the dust or fumes.   result in personal injury.
  3.   Keep children and bystanders away  while   15.  Do not overreach. Keep proper footing and
  operating a power tool. Distractions can cause   balance at all times. This enables better control
  3

• 1
• 2
• 3
• 4
• 10

Вы успешно зарегистрированы на сайте.
Вам доступен личный кабинет пользователя.

Перейти к покупкам

Ваш пароль воcстановлен!

Теперь вы можете полноценно пользоваться
всеми возможностями нашего интернет-магазина.

Здравствуйте, Ваша претензия принята и зарегистрирована.
В течение 3-х рабочих дней Вам, на электронную почту, будет дан письменный ответ. В случае возникновения дополнительных вопросов, менеджер претензионного отдела свяжется с Вами.

Перейти к покупкам

Ваше сообщение об ошибке на сайте успешно отправлено.
Большое спасибо!

Добавить отзыв о магазине

Торг для данного товара сейчас не возможен!

Сколько вы готовы заплатить за этот товар?

Мы принимаем вашу цену, и вы можете купить товар по цене:

0 руб.

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

1

2

3

4

5

6

7

8

9

10

11

12

Оглавление инструкции

• Страница 1 из 13
  ENGLISH (Original instructions) INSTRUCTION MANUAL Jig Saw JV0600 011955 DOUBLE INSULATION IMPORTANT: Read Before Using. 1
• Страница 2 из 13
  ENGLISH (Original instructions) SPECIFICATIONS Model JV0600 Length of stroke 23 mm Blade type B type Wood Max. cutting capacities 90 mm Mild steel 10 mm Strokes per minute (min-1) 500 — 3,100 Overall length 236 mm Net weight 2.4 kg Safety class /II • Due to our continuing programme of research and
• Страница 3 из 13
  ENH101-15 you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with
• Страница 4 из 13
  GEB016-3 of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust
• Страница 5 из 13
  CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the «OFF» position when released. • Switch can be locked in «ON» position for ease of operator comfort during extended use. Apply caution when locking tool in «ON» position and
• Страница 6 из 13
  the blade lightly to make sure that the blade does not fall off during operation. ASSEMBLY • CAUTION: If the lever does not move to the fixed position by itself, the blade is not installed completely. Do not press the lever by hand to the fixed position. It may damage the tool. Make sure that the
• Страница 7 из 13
  Loosen the bolt on the back of the base with the hex wrench and slide the base all the way back. Then tighten the bolt to secure the base. Bevel cutting Cutouts Cutouts can be made with either of two methods A or B. A) Boring a starting hole 1. Starting hole 011962 CAUTION: Always be sure that the
• Страница 8 из 13
  Finishing edges 1. Bolt 2. Fence guide 3. Hex wrench 4. Rip fence (Guide rule) 1 3 2 4 011971 To install, insert the rip fence into the rectangular hole on the side of the base with the fence guide facing down. Slide the rip fence to the desired cutting width position, then tighten the bolt to
• Страница 9 из 13
  Anti-splintering device (Optional accessory) OPTIONAL ACCESSORIES 1. Anti-splintering device 2. Tool base CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury
• Страница 10 из 13
  10
• Страница 11 из 13
  11
• Страница 12 из 13
  Makita Corporation Anjo, Aichi, Japan 885031-224 12 www.makita.com
• Страница 13 из 13