Makita sp6000 инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Plunge Cut Circular Saw
Scie circulaire pour coupe en
plongee
Sierra circular de corte de cavidad
SP6000
007654
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre securite, priere de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR REFERENCE ULTERIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
1

ENGLISH
SPECIFICATIONS
Model                               SP6000
Blade diameter                      165 mm (6-1/2")
at 90°                   56 mm (2-3/16")
Max. cutting depth   at 45°                   40 mm (1-9/16")
at 48°                   38 mm (1-1/2")
No load speed (RPM)                  2,000 - 5,200/min
Overall length                     341 mm (13-3/8")
Net weight                         4.1 kg (9.1 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
GEA001-3   extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
GENERAL SAFETY RULES                     electric shock.
WARNING! Read all instructions. Failure to follow all   Personal Safety
instructions listed below may result in electric shock, fire   9.   Stay alert, watch what you are doing and use
and/or serious injury. The term "power tool" in all of the   common sense when operating a power tool.
warnings listed below refers to your mains-operated   Do not use a power tool while you are tired or
(corded) power tool or battery-operated (cordless) power   under the  influence of drugs, alcohol or
tool.                                    medication.  A  moment of inattention while
operating power tools may result  in  serious
SAVE THESE INSTRUCTIONS.                 personal injury.
Work area safety                      10.  Use safety equipment.  Always  wear eye
1.   Keep work area clean and well lit. Cluttered and   protection. Safety equipment such as dust mask,
dark areas invite accidents.         non-skid  safety shoes, hard hat,  or hearing
2.   Do not operate power tools  in explosive   protection  used  for appropriate conditions will
atmospheres, such as  in the presence of   reduce personal injuries.
flammable liquids, gases or dust. Power tools   11.  Avoid accidental starting. Ensure the switch is
create sparks which may ignite the dust or fumes.   in the off-position before plugging in. Carrying
3.   Keep children and bystanders away  while   power tools with  your finger on the switch or
operating a power tool. Distractions can cause   plugging in power tools that have the switch on
you to lose control.                 invites accidents.
Electrical Safety                     12.  Remove any adjusting key or  wrench before
4.   Power tool plugs must match the outlet. Never   turning the power tool on. A wrench or a key left
modify the plug in any  way. Do not use any   attached to a rotating part of the power tool may
adapter plugs with earthed (grounded) power   result in personal injury.
tools. Unmodified plugs and matching outlets will   13.  Do not overreach. Keep proper footing and
reduce risk of electric shock.       balance at all times. This enables better control
5.   Avoid body contact with earthed or grounded   of the power tool in unexpected situations.
surfaces such as pipes, radiators, ranges and   14.  Dress properly. Do not wear loose clothing or
refrigerators.  There is an increased risk of   jewellery. Keep your hair, clothing, and gloves
electric shock if your body is earthed or grounded.   away from moving parts. Loose clothes,
6.   Do not expose  power tools to rain or  wet   jewellery or long hair  can  be  caught in moving
conditions. Water  entering a  power tool  will   parts.
increase the risk of electric shock.   15.  If devices are provided for the connection of
7.   Do not abuse the cord. Never use the cord for   dust extraction and collection facilities,
carrying, pulling or unplugging the power tool.   ensure these are connected and properly used.
Keep cord away from heat, oil, sharp edges or   Use of  these devices  can reduce  dust-related
moving parts. Damaged or  entangled  cords   hazards.
increase the risk of electric shock.   Power tool use and care
8.   When operating a power tool outdoors, use an   16.  Do not force the power tool. Use the correct
2

power tool for  your application. The  correct   handle, or motor housing. If both  hands  are
power tool will do the job better and safer at the   holding the saw, they cannot be cut by the blade.
rate for which it was designed.   2.   Do not reach underneath the workpiece or tool
17.  Do not use the power tool if the switch does   base. The guard  cannot protect you from the
not turn it on and off. Any power tool that cannot   blade below the  workpiece. Do not attempt  to
be controlled  with the switch  is dangerous  and   remove cut material when blade is moving.
must be repaired.                    CAUTION: Blades coast after turn off. Wait until
18.  Disconnect the plug from the power source   blade stops before grasping cut material.
and/or the battery  pack  from the  power tool   3.   Adjust the cutting depth to the thickness of
before making any adjustments, changing   the workpiece. Less than a full tooth of the blade
accessories, or  storing power  tools. Such   teeth should be visible below the workpiece.
preventive safety measures reduce  the risk of   4.   Never hold piece being cut in  your hands or
starting the power tool accidentally.   across  your leg. Secure the  workpiece  to
19.  Store idle power tools out of the  reach of   stable platform. It is important  to  support the
children and do not allow persons unfamiliar   work properly to minimize body exposure, blade
with the power  tool or these instructions to   binding, or loss of control.
operate the power  tool.  Power tools are
dangerous in the hands of untrained users.
20.  Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any  other condition that  may  affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
21.  Keep cutting tools  sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.   A typical illustration of proper hand support, workpiece
22.  Use the power tool, accessories and tool bits   support, and supply cord routing (if applicable).
etc. in accordance with these instructions and   000157
in the manner intended for the particular type
of power tool, taking into account the working   5.   Hold power tool by insulated gripping
conditions and the work to be performed. Use   surfaces when performing an operation where
of the power tool  for operations different from   the cutting tool may contact hidden wiring or
those intended could result in a hazardous   its own cord. Contact with a "live" wire will also
situation.                           make exposed metal parts of the power tool "live"
SERVICE                                  and shock the operator.
23.  Have your power tool serviced by a qualified   6.   When ripping always use a rip fence or
repair person using only identical replacement   straight edge guide. This improves the accuracy
parts. This will ensure that the safety of the power   cut and reduces the chance of blade binding.
tool is maintained.               7.   Always use blades with correct size and shape
24.  Follow  instruction  for  lubricating  and  (diamond versus round) of arbour holes.
changing accessories.                Blades that do not match the mounting hardware
25.  Keep handles dry, clean and free from oil and   of the saw will run eccentrically, causing loss of
grease.                              control.
GEB031-1
8.   Never use damaged or  incorrect blade
SPECIFIC SAFETY RULES                    washers or bolt.  The blade washers and  bolt
DO NOT let comfort or familiarity  with product   were specially designed for your saw, for optimum
performance and safety of operation.
(gained from repeated use) replace strict adherence   9.   Causes and Operator Prevention of Kickback:
to circular saw  safety rules. If  you  use this  tool   ?   kickback is a sudden reaction to a pinched,
unsafely or incorrectly,  you can suffer serious   bound or misaligned saw blade, causing an
personal injury.                            uncontrolled  saw to lift up and out  of the
Danger:                                     workpiece toward the operator;
1.   Keep hands away from cutting area and the   ?   when the blade is pinched or bound tightly by
blade. Keep  your second hand on auxiliary
3

Page 2: Specifications

Standard and can, therefore, also be used from sockets without earth wire. Makita Corporation responsible ENG102-2 manufacturer declare that the following Makita For European countries only machine(s): Noise Designation of Machine: Plunge Cut Circular Saw The typical A-weighted noise level determined according Model No./ Type: SP6000…

Page 3: General Power Tool Safety Warnings

Europe who is: Keep cord away from heat, oil, sharp edges or Makita International Europe Ltd, moving parts. Damaged or entangled cords Michigan, Drive, Tongwell, increase the risk of electric shock.

Page 4: Specific Safety Rules

power tool will do the job better and safer at the Do not reach underneath the workpiece or tool rate for which it was designed. base. The guard cannot protect you from the 18. Do not use the power tool if the switch does blade below the workpiece.

Page 7: Functional Description

19. Do not stop the blades by lateral pressure on Quick stop button for 2 to 3 mm depth of cut the saw blade. when using guide rail (accessory) 20. Always use blades recommended in this 1. Quick stop manual. Do not use any abrasive wheels. button 21.

Page 9: Assembly

6 and back to 1. Do not force it past 6 or 1, or at the front of the tool. the speed adjusting function may no longer work. Use only the Makita wrench to install or remove the • The speed adjusting dial is not for using low speed •…

Page 10: Operation

When using with guide rail (accessory) 1. Adjusting screws 007673 When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Connect a hose of the vacuum cleaner to the dust port as shown 007685 in the figure.

Page 11: Maintenance

When bevel cutting with the guide rail, slide the slide When using the tool with guide rail lever on the tool base so that the tool does not fall down Place the tool on the guide rail with the rear edge of tool on its side.

Page 12: Accessories

Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Guide rail • 007668 Rip fence (Guide rule) •…