Мануал форд 2004 года

  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Automobile
  5. 2004 Focus
  6. Owner’s manual

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

Table of Contents

2004 Focus (foc)

Owners Guide (post-2002-fmt)

USA English (fus)

Table of Contents

10

16

34

38

50

61

4

10

14

16

19

34

35

37

38

41

50

51

52

53

54

61

61

64

1

loading

Related Manuals for Ford 2004 Focus

Summary of Contents for Ford 2004 Focus

  • Page 1: Table Of Contents

    Manual heating and air conditioning Rear window defroster Lights Headlamps Turn signal control Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Locks and Security Keys Locks Anti-theft system 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 2
    Recreational towing Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Jump starting Wrecker towing Customer Assistance Reporting safety defects (U.S. only) Cleaning 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 3
    Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2003 Ford Motor Company…

  • Page 4: Introduction

    State of California to cause cancer and birth defects or other reproductive harm. CONGRATULATIONS Congratulations on acquiring your new Ford. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it.

  • Page 5
    SPECIAL NOTICES Emission warranty The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage, Safety Restraint Coverage, Corrosion Coverage, and 6.0L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 6
    • how fast the vehicle was traveling; and • where the driver was positioning the steering wheel. To access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 7
    Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. MIDDLE EAST/NORTH AFRICA VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the ones that are described in this Owner Guide;…

  • Page 8: Vehicle Symbol Glossary

    Brake Fluid — Anti-Lock Brake System Non-Petroleum Based Traction Control AdvanceTrac Master Lighting Switch Hazard Warning Flasher Fog Lamps-Front Fuse Compartment Fuel Pump Reset Windshield Wash/Wipe Windshield Rear Window Defrost/Demist Defrost/Demist 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 9
    Battery Acid or Sparks Explosive Gas Fan Warning Maintain Correct Fluid Power Steering Fluid Level Emission System Engine Air Filter Passenger Compartment Jack Air Filter Check fuel cap Low tire warning 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 10: Instrument Cluster

    Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’s functions. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 11
    Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately by your servicing dealership. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 12
    SPI, Zetec E or automatic transaxle vehicles only): Momentarily illuminates when the ignition is turned to the ON position and the engine is off. If the light illuminates while driving, have your vehicle serviced. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 13
    Turn signal: Illuminates when the left or right turn signal or the hazard lights are turned on. If the indicators stay on or flash faster, check for a burned out bulb. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 14: Gauges

    “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. If it enters 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 15
    ON position). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. Refer to Filling the tank in the Maintenance and Specifications chapter for more information. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 16: Entertainment Systems

    Press AM/FM to restore radio reception without ejecting the disc. 4. AM/FM: Press to toggle between AM/FM1/FM2 frequency bands and or press to stop CDDJ (if equipped) play. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 17
    AM/FM to activate. AST will flash in the display. When the six strongest stations are filled, the sound will be restored. 8. Anti-theft protection panel: To deter would-be thieves, Ford audio units have a removable front panel without which the unit will not work.
  • Page 18
    Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: • Your name and address.

  • Page 19: Am/Fm Stereo With Cd

    CD passages together for a more consistent listening level. Shuffle: Press MENU until SHUF appears in the display. Press SEEK to engage/disengage the feature. Shuffle plays the songs on the current CD in random order. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 20
    AM/FM to activate. AST will flash in the display. When the six strongest stations are filled, the sound will be restored. 7. Anti-theft protection panel: To deter would-be thieves, Ford audio units have a removable front panel without which the unit will not work.
  • Page 21
    Entertainment Systems Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: • Your name and address. • The vehicle identification number (visible in the corner of the windscreen). • The audio unit type.
  • Page 22
    Entertainment Systems 6006 AM/FM SOUND SYSTEM WITH 6–DISC IN DASH CHANGER (IF EQUIPPED) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 23
    4. CD: Press to engage CD mode. CDs and tracks are selected and played chronologically. Disc one will follow disc six. Press the AM/FM control to restore radio reception without ejecting the disc. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 24
    The display will indicate the level selected. Balance: Press BAL; turn the volume control to shift sound to the left/right speakers. The display will indicate the level selected. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 25
    Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: • Your name and address.
  • Page 26
    Automatic volume control (AVC) (if equipped):With this feature, radio volume changes automatically with vehicle speed to compensate for road and wind noise. Press MENU until AVC is displayed, then use the SEEK control to adjust the volume. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 27
    CD tracks. Press again to stop. MP3: Press once for a brief sampling of the tracks on the currently selected MP3 directory. SCN ALB appears at the bottom of the display. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 28
    Press ENTER or BACK to save the setting. Program type (PTY): When selected, this function allows you to view the radio broadcast information (if any) or search for stations 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 29
    If yes is selected, the audio unit will return to all of its default settings. Traffic Announcements: When activated, the audio unit will automatically switch from the current playing media to a traffic announcement when received. When the announcement is over, the 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 30
    To store a station, press and hold the soft key (next to the desired frequency) until you hear a beep. This indicates the station has been stored. To select a station, press the 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 31
    • When the system is playing an MP3 disc, the directory name, track name and artist name are shown in the display. The directory number also appears in the left hand corner of the display. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 32
    • Allow tapes which have been subjected to extreme heat, humidity or cold to reach a moderate temperature before playing. • Clean the cassette player head with a cassette cleaning cartridge after 10–12 hours of play to maintain good sound/operation. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 33
    Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player.

  • Page 34: Climate Controls

    • Do not put objects under the front seats that will interfere with the air flow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 35: Manual Heating And Air Conditioning

    Use with A/C for the most fast and efficient cooling of the vehicle. May help reduce undesirable odors from entering the vehicle. Recirculated air will not function in or any position in between 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 36
    To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 37: Rear Window Defroster

    This may cause damage to the heated grid lines and will not be covered by your warranty. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 38: Lights

    The Daytime Running Lamp (DRL) system does not activate with your tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 39
    VOR is marked on the bottom inboard corner of the lens. VOL is marked on the top of the lens between the rubber seal and black plastic housing. Please check the lens markings prior to adjusting the vehicle aim. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 40
    2.5 meters (8 foot) horizontal reference line on the vertical wall or screen at this height. (A piece of masking tape works well.) 3. Open the hood. 4. Remove the battery cover. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 41: Turn Signal Control

    9. Attach the headlamp bulb covers. 10. Attach the battery cover and close the hood. TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 42
    The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 43
    To replace all instrument panel lights — see your dealer Replacing the interior bulbs Check the operation of the bulbs frequently. To replace any of the interior bulbs, see a dealer or qualified technician. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 44
    The low beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your dealer or a qualified technician. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 45
    3. Pull the bulb straight out of the bulb socket. Note: On vehicles fitted with VOL (HID) headlamps, have your Ford dealer change the park lamp bulbs. 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 46
    3. Gently pull the light housing to the outside. 4. Turn the bulb socket counterclockwise and pull it out. 5. Pull the bulb straight out of the socket. Install in reverse order. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 47
    OFF position. 2. Reach under the front fender and grasp the bulb socket, turn the light housing counterclockwise. 3. Pull the bulb straight out. Install in reverse order. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 48
    1. Make sure the headlamp control is in the OFF position. 2. Insert a flathead screwdriver in the recess and pry out the complete light assembly. 3. Pull the bulb straight out. Install in reverse order. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 49
    Install in reverse order Replacing reading bulbs 1. Open the reading lamp assembly. 2. Pull the bulb straight out and replace it. 3. After the bulb has been replaced, close the lamp assembly. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 50: Driver Controls

    The wipers will provide three wipes after the wash is turned off. Rear window wiper/washer (if equipped) Wiper Pull the lever towards you for intermittent wiping. Washer Pull the lever further to operate the washer. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 51: Steering Wheel Adjustment

    Always place both hands opposite each other to adjust. Never adjust the steering wheel when the vehicle is moving. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 52: Power Windows

    POWER WINDOWS (IF EQUIPPED) When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in the proximity of the window openings. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 53: Mirrors

    2. Move the control in the direction you wish to tilt the mirror. 3. Return to the center position to lock mirrors in place. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 54: Speed Control

    Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release 2. Accelerate to the desired speed. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 55
    This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 48 km/h (30 mph). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 56
    1.6 km/h (1 mph). • Depress the brake pedal until the desired vehicle speed is reached, press the SET ACCEL control. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 57
    Before operating the moonroof you should verify that it is free of obstructions and ensure that children and/or pets are not in the proximity of moon roof opening. Do not let children play with the moon roof. They may seriously hurt themselves. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 58
    The moon roof will move about 0.5 seconds at a time and then stop again. Press the switch again and again until the moon roof is closed. Have the system checked by your Ford Dealer immediately. REMOTE LUGGAGE COMPARTMENT RELEASE (IF EQUIPPED) To open the luggage compartment, press the control.
  • Page 59
    Detach the lifting straps on the liftgate. Release the cover at the sides and pull it out horizontally without tilting it. Install in reverse order. Make sure the cover is properly aligned when inserting it. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 60
    Loaded vehicles, with a higher center of gravity, may handle differently than unloaded vehicles. Extra precautions, such as slower speeds and increased stopping distance, should be taken when driving a heavily loaded vehicle. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 61: Locks And Security

    You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to ON. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 62
    Adults are advised to familiarize themselves with the operation and location of the release handle. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 63
    Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat-related injuries, including brain damage. Small children are particularly at risk. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 64: Anti-Theft System

    The remote entry features only operate with the ignition in the OFF or ACC position. If there is any potential remote keyless entry problem with your vehicle, ensure ALL remote entry transmitters are brought to the dealership, to aid in troubleshooting. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 65
    Note: The panic alarm will only operate when the ignition is in the OFF position. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 66
    How to reprogram your remote entry transmitters You must have all remote entry transmitters (maximum of four) available before beginning this procedure. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 67
    Note: The SecuriLock passive anti-theft system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Large metallic objects, electronic devices that are used to…
  • Page 68
    • If two previously programmed coded keys are not available, you must take your vehicle to your dealer to have the spare key(s) programmed. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 69
    If failure repeats, bring your vehicle to your dealer to have the new key(s) programmed. To program additional new unprogrammed key(s), repeat this procedure from step 1 for each additional key. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 70
    Triggering the anti-theft system The armed system will be triggered if any door, liftgate/trunk or the hood is opened without using the key or the remote entry transmitter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 71: Seating And Safety Restraints

    To lower, push the button in the collar around the stem. The rear head restraints can be removed altogether if the left-hand locking button is pressed. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 72
    Turn the control to adjust the lumbar support. Turn the handle to adjust the height of the seat. Lift the control to adjust the angle of the seatback. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 73
    Slide the seat back and fold back the seatback until it locks with a distinct click. The seatback will return to its original position. Rock the seat to ensure that the catch is securely engaged. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 74
    Lift the seat cushion and pull it forward. When returning the seats back to their original positions, make sure they are fully locked and that the safety restraints are positioned in front of the seatback. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 75
    Reinstall head restraints (if equipped). Note that the center rear seat belt cannot be pulled out until the seatback has latched completely. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 76: Safety Restraints

    • Restraint system warning light and back-up tone. • The electrical wiring for the air bags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, and indicator lights. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 77
    This information allows your Personal Safety System to tailor the air bag deployment and safety belt pretensioner activation depending upon safety belt usage. Refer to Safety Belt section in this chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 78
    If any of these things happen, even intermittently, have the Personal Safety System serviced at your dealership or by a qualified technician immediately. Unless serviced, the system may not function properly in the event of a collision. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 79
    Never swing the safety belt around your neck over the inside shoulder. 3) Never use a single belt for more than one person. Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 80
    “automatic locking retractor” feature for child seats is still functioning properly. In addition, all seat belts should be checked for proper function. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 81
    (if equipped). Children 12 years old and under should be properly restrained in the rear seat whenever possible. Refer to Safety restraints for children or Safety seats for children later in this chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 82
    This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode Ford Motor Company recommends that all passenger safety belt assemblies and attaching hardware should be inspected by a qualified technician after any collision to verify that the automatic locking retractor feature for child seats is still working properly.
  • Page 83
    Pull the safety belt backwards to park for easier access or exit from the rear seats. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 84
    This feature provides additional reminders to the driver that the driver’s safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 85
    We design our safety belts to enhance comfort. If you are uncomfortable — try different positions for the safety belt upper anchorage and seatback which should be as upright as possible; this can improve comfort. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 86
    Minder chime. Sitting on the safety belt will increase the risk of injury in an accident. To disable (one-time) or deactivate the Belt Minder feature please follow the directions stated below. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 87
    3. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled. This can be done before or during BeltMinder warning activation. 4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 88
    Replace if necessary. All safety belt assemblies, including retractors, buckles, front seat belt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seatback (if 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 89: Air Bags

    Seating and Safety Restraints equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a collision. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced. However, if the collision was minor and a qualified technician finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.

  • Page 90
    Do not put anything on or over the air bag module. Placing objects on or over the air bag inflation area may cause those objects to be propelled by the air bag into your face and torso causing serious injury. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 91
    Seating and Safety Restraints Do not attempt to service, repair, or modify the air bag supplemental restraint systems or its fuses. See your Ford or Lincoln Mercury dealer. Children and air bags Children must always be properly restrained. Accident statistics…
  • Page 92
    • side air bags (if equipped). Refer to Side air bag system later in this chapter. • one or more impact and safing sensors. • a readiness light and tone. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 93
    Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side air bags and increase the risk of injury in an accident. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 94
    Do not attempt to service, repair, or modify the air bag SRS, its fuses or the seat cover on a seat containing an air bag. See your Ford or Lincoln Mercury dealer. All occupants of the vehicle should always wear their safety belts even when an air bag SRS is provided.

  • Page 95: Child Restraints

    Always transport children 12 years old and under in the back seat and always use appropriate child restraints. Accident statistics indicate that children are safer when properly restrained in the rear seats. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 96
    Moving the child closer to the center of the vehicle may help provide a good shoulder belt fit. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 97
    To improve the fit of both the lap and shoulder belt on children who have outgrown child safety seats, Ford Motor Company recommends use of a belt-positioning booster. Booster seats position a child so that safety belts fit better. They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably.
  • Page 98
    It is best to use a booster seat with lap/shoulder belts in the back seat- the safest place for children to ride. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 99
    • Place seat back in upright position. • Put the safety belt in the automatic locking mode. Refer to Automatic locking mode (passenger side front and outboard rear seating positions) (if equipped) section in this chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 100
    36 kg (80 pounds) using an upper torso harness and a belt-positioning booster. Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position with LATCH and tether anchors.
  • Page 101
    3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 102
    7. Pull the lap belt portion across the child seat toward the buckle and pull up on the shoulder belt while pushing down with your knee on the child seat. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 103
    Attach the tether strap only to the appropriate tether anchor as shown. The tether strap may not work properly if attached somewhere other than the correct tether anchor. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 104
    • For Coupe and Wagon, the anchors are located on the back of the rear seat. 4. On a sedan, open the tether anchor cover. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 105
    For forward-facing child seats, the tether strap must also be attached to the proper tether anchor point. For information on using tether straps with the child safety seats, refer to Attaching safety seats with tether straps in this chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 106
    Check to see if the anchors hold the seat in place. If the safety seat in not anchored properly, the risk of a child being injured in a collision greatly increases. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 107: Driving

    Do not start your vehicle in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine. See Guarding against exhaust fumes in this chapter for more instructions. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 108
    2. Make sure the headlamps and electrical accessories are off. If starting a vehicle with an automatic transaxle: • Make sure the parking brake is set. • Make sure the gearshift is in P (Park). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 109
    1. Make sure the parking brake is set. 2. Push the clutch pedal to the floor. • Turn the key to 3 (ON) without turning the key to 4 (START). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 110
    The heater can be plugged in the night before starting the vehicle. To reduce the risk of electrical shock, do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 111: Brakes

    Using ABS When hard braking is required, apply continuous force on the brake pedal; do not pump the brake pedal since this will reduce the 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 112
    1 (First) (manual transmission). If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your dealer or a qualified service technician. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 113: Traction Control

    • Do not operate the vehicle with a low power steering pump fluid level (below the MIN mark on the reservoir). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 114: Transmission Operation

    2. Using a screwdriver (or similar tool), remove the protective cover to the interlock access hole on the console. Insert the key to release the interlock. 3. Apply the parking brake, then shift to N (Neutral). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 115
    This position locks the transaxle and prevents the front wheels from turning. To put your vehicle in gear: • Start the engine • Depress the brake pedal • Move the gearshift lever into the desired gear 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 116
    • O/D (Overdrive) is automatically returned each time the key is turned off. 2 (Second) This position allows for second gear only. • Provides engine braking. • Use to start-up on slippery roads. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 117
    To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to the floor, then put the gearshift lever in the neutral position. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 118
    R (Reverse) (2). Parking your vehicle 1. Apply the brake and shift into the neutral position. 2. Fully apply the parking brake, then shift into 1 (First). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 119: Vehicle Loading

    It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 120
    Note: For trailer towing information refer to Trailer Towing found in this chapter or the RV and Trailer Towing Guide provided by your dealership. GVW (Gross Vehicle Weight) – is the Vehicle Curb Weight + cargo + passengers. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 121
    Maximum Loaded Trailer Weight – is the highest possible weight of a fully loaded trailer the vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal or external), a tongue load of 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 122: Trailer Towing

    Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transaxle damage, structural damage, increased risk of loss of vehicle control, vehicle rollover and/or serious personal injury. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 123
    Driving while you tow When towing a trailer: • Turn off the speed control. The speed control may shut off automatically when you are towing on long, steep grades. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 124: Recreational Towing

    If your vehicle is equipped with an automatic transaxle, you cannot tow the vehicle with the front drive wheels on the ground. It is recommended to tow your vehicle with the drive wheels on a dolly or two wheel car hauling trailer. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 125
    (all wheels on the ground) under the following conditions: • Place the transmission in N (Neutral). • Maximum distance is unlimited. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 126: Roadside Emergencies

    Roadside Emergencies Roadside Emergencies GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: •…

  • Page 127: Hazard Flasher Switch

    Roadside Emergencies Canadian customers who require roadside assistance, call 1–800–665–2006. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount. To obtain reimbursement information, U.S. Ford or Mercury vehicles customers call 1-800-241-3673; Lincoln vehicle customers call 1–800–521–4140.

  • Page 128: Fuses And Relays

    Note: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 129
    The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided on the fuse panel cover. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 130
    — Front wiper intermittent relay — Not used — Not used — Decklid/Liftgate release relay — Horn relay — Battery saver relay — Rear defrost relay Light switch Radio Turn signal 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 131
    Backup lamps (manual transaxle) Rear power windows Front power windows Front wipers 7.5A Position and side lights (right) 7.5A Position and side lights (left) 7.5A Light switch (headlamps) 7.5A Air bag module 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 132
    Always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs If the battery has been disconnected and reconnected, refer to the Battery section of the Maintenance and specifications chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 133
    Cooling fan (2.0L engine only) Air pump motor Cooling fan 2 (2.0L engine only) Engine cooling fan (A/C) 1st fuse Main power supply to electrical system Ignition switch, Starter Engine management 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 134
    — Not used Engine module Low beam (DRL) Cooling fan (2.3L engine only) Subwoofer — Not used — Not used High beams (right and left) — Not used — Not used 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 135: Changing Tires

    If you get a flat tire while driving: • do not brake heavily. • gradually decrease the vehicle’s speed. • hold the steering wheel firmly. • slowly move to a safe place on the side of the road. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 136
    Use of a temporary spare tire at any one wheel location can lead to impairment of the following: • handling, stability and braking performance • comfort and noise • ground clearance and parking at curbs • Winter driving capability 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 137
    The lug wrench is located in a bag next to the spare tire (coupe and 5–door models) or on top of the spare tire (sedan and wagon models). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 138
    (SVT only) to access the proper jacking points. 5. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 139: Jump Starting

    The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 140
    Connecting the jumper cables 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 141
    2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 142
    If your vehicle is equipped with a 2.0L engine (SPI or Zetec), make the final connection to the specific grounding point as indicated in the following illustrations. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 143
    Roadside Emergencies • 2.0L SPI engine • 2.0L Zetec engine 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 144
    Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 145
    Roadside Emergencies 2. Remove the jumper cable on the negative (-) connection of the booster vehicle’s battery. 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 146
    After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 147: Wrecker Towing

    It is recommended that your vehicle be towed with a wheel lift or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. If your vehicle is to be towed from the rear using wheel lift equipment, the front wheels (drive wheels) must be placed on a dolly to prevent damage to the transmission.

  • Page 148: Customer Assistance

    Center at the number below. Away from home If you own a Ford or Mercury vehicle and are away from home when your vehicle needs service, or if you need more help than the dealership could provide, after following the steps described above, contact the Ford Customer Relationship Center to find an authorized dealership to help you.

  • Page 149
    If you still have a complaint involving a warranty dispute, you may wish to contact the Dispute Settlement Board (U.S.). In some states (in the U.S.) you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
  • Page 150
    5,000 participating Ford or Lincoln Mercury and Ford of Canada dealers. If you did not take advantage of the Ford Extended Service Plan at the time of purchasing your vehicle, you may still be eligible. Since this information is subject to change, please ask your dealer for complete details about Ford Extended Service Plan coverage options, or visit the Ford ESP website at www.ford-esp.com.
  • Page 151
    Customer Assistance The Dispute Settlement Board may not be available in all states. Ford Motor Company reserves the right to change eligibility limitations, modify procedures and/or to discontinue this service without notice and without incurring obligations per applicable state law.
  • Page 152
    • The name of the dealer(s) who sold or serviced the vehicle. • A brief description of your unresolved concern. • A brief summary of the action taken by the dealer(s) and Ford Motor Company. • The names (if known) of all the people you contacted at the dealership(s).
  • Page 153
    After a case is reviewed, the Board mails you a decision letter and a form on which to accept or reject the Board’s decision. The decisions of the Board are binding on Ford (and, in some cases, on the dealer) but not on consumers who are free to pursue other remedies available to them under state or federal law.
  • Page 154
    If your vehicle must be serviced while you are traveling or living in Central or South America, the Caribbean, or the Middle East, contact the nearest Ford dealership. If the dealership cannot help you, write or call: FORD MOTOR COMPANY…
  • Page 155
    Obtaining a French owner’s guide French Owner’s Guides can be obtained from your dealer or by writing to Ford Motor Company of Canada, Limited, Service Publications, P.O. Box 1580, Station B, Mississauga, Ontario L4Y 4G3. IN CALIFORNIA (U.S. ONLY) California Civil Code Section 1793.2(d) requires that, if a manufacturer…

  • Page 156: Reporting Safety Defects (U.s. Only)

    However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1–800–424–9393 (or 366–0123 in the Washington D.C.

  • Page 157: Cleaning

    (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area. The paint sealant will “gray” or stain the parts over time. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 158
    • Take care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with cold water to avoid cracking the engine block or other engine components. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 159
    • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. • Cover the highlighted areas to prevent water damage when cleaning the engine. • 2.0L SPI engine 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 160
    Cleaning • 2.0L Zetec-E engine • 2.3L engine 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 161
    • Be certain to wash or wipe your hands clean if you have been in contact with certain products such as insect repellent and suntan lotion in order to avoid possible damage to the interior painted surfaces. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 162
    If this occurs, the leather should be cleaned immediately to avoid permanent staining. UNDERBODY Flush the complete underside of your vehicle frequently. Keep body and door drain holes free from packed dirt. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 163
    Cleaning FORD, LINCOLN AND MERCURY CAR CARE PRODUCTS Your Ford, Lincoln or Mercury dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle.

  • Page 164: Maintenance And Specifications

    2. Turn off the engine and remove the key. 3. Block the wheels. Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 165
    The engine cooling fan may operate for several minutes after the engine is turned off. Do not start maintenance work until the fan has stopped operating. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 166: Engine Compartment

    3. Engine oil filler cap 4. Brake/Clutch fluid reservoir 5. Power distribution box 6. Air filter assembly 7. Windshield washer fluid reservoir 8. Battery 9. Automatic transaxle fluid dipstick (if equipped) 10. Engine coolant reservoir 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 167
    3. Brake/Clutch fluid reservoir 4. Power distribution box 5. Air filter assembly 6. Windshield washer fluid reservoir 7. Battery 8. Automatic transaxle fluid dipstick (if equipped) 9. Engine oil dipstick 10. Engine coolant reservoir 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 168
    4. Power distribution box 5. Battery 6. Windshield washer fluid reservoir 7. Air filter service minder 8. Automatic transaxle fluid dipstick (if equipped) 9. Engine oil dipstick 10. Engine coolant reservoir 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 169: Engine Oil

    3. Set the parking brake and ensure the gearshift is securely latched in P (automatic transaxle) or 1st (manual transaxle). 4. Open the hood. Protect yourself from engine heat. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 170
    • If the oil level is between the MIN and MAX marks (2.0L SPI/2.3 engine) or between ADD and FULL (2.0L Zetec engine), the oil level is acceptable. DO NOT ADD OIL. • 2.0L SPI 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 171
    2. If the engine oil level is not within the normal range, add only certified engine oil of the recommended viscosity. Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 172
    Only use oils “Certified For Gasoline Engines” by the American Petroleum Institute (API). To protect your engine’s warranty use Motorcraft SAE 5W-20 or an equivalent 5W-20 oil meeting Ford specification WSS-M2C153–H. SAE 5W-20 oil provides optimum fuel economy and durability performance meeting all requirements for your vehicle’s engine.

  • Page 173: Battery

    Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 174
    As a result of this, the transmission may shift firmly. This operation is considered normal and will fully update transmission operation to its optimum shift feel. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 175
    • Freeze protection down to -36° C (-34° F). • Boiling protection up to 129° C (265° F). • Protection against rust and other forms of corrosion. • Enables calibrated gauges to work properly. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 176
    Also, you can be burned if you spill coolant on hot engine parts. Do not put engine coolant in the windshield washer fluid container. If sprayed on the windshield, engine coolant could make it difficult to see through the windshield. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 177
    Maintenance and Specifications • Add Motorcraft Premium Gold Engine Coolant (yellow-colored), VC-7–A (U.S., except CA and OR), VC-7–B (CA and OR only), meeting Ford Specification WSS-M97B51–A1. Note: Use of Motorcraft Cooling System Stop Leak Pellets, VC-6, may darken the color of Motorcraft Premium Gold Engine Coolant from yellow to golden tan.
  • Page 178
    Recycled engine coolant Ford Motor Company does NOT recommend the use of recycled engine coolant in vehicles originally equipped with Motorcraft Premium Gold Engine Coolant since a Ford-approved recycling process is not yet available.
  • Page 179
    • The “Check Engine” indicator light will illuminate. If the engine reaches a preset over-temperature condition, the engine will automatically switch to alternating cylinder operation. Each disabled cylinder acts as an air pump and cools the engine. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 180: Fuel Information

    WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS Important safety precautions Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 181
    Failure to seek proper medical attention could lead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If fuel is splashed on the skin and/or clothing, promptly remove contaminated 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 182
    3. Pull to remove the cap from the fuel filler pipe. 4. To install the cap, align the tabs on the cap with the notches on the filler pipe. 5. Turn the filler cap clockwise until four clicks are heard. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 183
    The customer warranty may be void for any damage to the fuel tank or fuel system if the correct genuine Ford or Motorcraft fuel filler cap is not used. The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap.
  • Page 184
    Ask your fuel supplier about gasolines that meet the World-wide Fuel Charter. Cleaner air Ford endorses the use of reformulated “cleaner-burning” gasolines to improve air quality. Running out of fuel Avoid running out of fuel because this situation may have an adverse affect on powertrain components.
  • Page 185
    Your results will be most accurate if your filling method is consistent. Calculating fuel economy 1. Fill the fuel tank completely and record the initial odometer reading (in kilometers or miles). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 186
    • You may want to turn off the speed control in hilly terrain if unnecessary shifting between third and fourth gear occurs. Unnecessary shifting of this type could result in reduced fuel economy. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 187
    Every new vehicle should have the EPA window sticker. Contact your dealer if the window sticker is not supplied with your vehicle. The EPA window sticker should be your guide for the fuel economy comparisons with other vehicles. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 188
    If other than Ford, Motorcraft or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
  • Page 189
    Instrument Cluster chapter. Your vehicle may not pass the I/M test with indicator on. If the vehicle’s powertrain system or its battery has just been serviced, the on-board diagnostics system is reset to a “not ready for I/M test” 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 190
    (between the MIN and MAX lines). Use only MERCON ATF. BRAKE/CLUTCH FLUID RESERVOIR Brake and clutch systems are supplied from the same reservoir. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 191
    Automatic transmission fluid expands when warmed. To obtain an accurate fluid check, drive the vehicle until it is warmed up (approximately 30 km [20 miles]). If your vehicle has been 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 192
    66°C-77°C (150°F-170°F) on a level surface. The normal operating temperature can be reached after approximately 30 km (20 miles) of driving. The transmission fluid should be in this range if at normal operating temperature (66°C-77°C [150°F-170°F]). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 193
    Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 194
    5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. Refer to Lubricant Specifications in this chapter. INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING New vehicles are fitted with tires that have a rating on them called Tire Quality Grades.
  • Page 195
    The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 196
    This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 197
    These speed ratings may need to be adjusted for the difference in conditions. The ratings range from 159 km/h (99 mph) to 299 km/h (186 mph). These ratings are listed in the following chart. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 198
    Refer to the tire label or the safety certification label, located on the B-Pillar or the driver’s door, for the correct tire pressure for your vehicle 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 199
    Note: You may not find this information on all tires because it is not required by federal law. The tire suppliers may have additional markings, notes or warnings such as standard load, radial tubeless, etc. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 200
    4. Maximum Load Single kg (lbs.) at kPa (psi) cold: Indicates the maximum load and tire pressure when the tire is used as a single; a single is defined as when two tires (total) are put on the rear axle. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 201
    You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial type tire pressure gauge rather that a stick type tire pressure gauge.
  • Page 202
    5. Repeat this procedure for each tire, including the spare. Note: Some spare tires require higher inflation pressure than the other tires. Check the tire label on the B pillar or the driver’s door for the recommended spare tire pressure. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 203
    If your vehicle seems to pull to one side, vibrate or shake when you’re driving, the wheels may be out of alignment. Have a qualified technician at a Ford or Lincoln/Mercury dealer check the wheel alignment periodically.
  • Page 204
    Maintenance and Specifications • Front Wheel Drive (FWD) vehicles (front tires at top of diagram) • Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD) vehicles (front tires at top of diagram) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 205
    Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your tires show uneven wear ask a qualified technician at a Ford or Lincoln/Mercury dealership to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation.
  • Page 206
    However, in some climates, you may need to use snow tires and chains. If you need to use chains, it is recommended that steel wheels (of the same size and specifications) be used, as chains may chip aluminum wheels. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 207: Part Numbers

    The PCV valve is a critical emission component. It is one of the items listed in the scheduled maintenance guide and is essential to the life and performance of your vehicle and to its emissions system. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 208: Refill Capacities

    Refer to the scheduled maintenance guide for the appropriate intervals for changing the PCV valve. Replace the PCV valve with one that meets Ford material and design specifications for your vehicle, such as a Motorcraft or equivalent replacement part. The customer warranty may be void for any damage to the emissions system if such a PCV valve is not used.

  • Page 209
    Owner Guide. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance guide to determine the correct service interval. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 210: Lubricant Specifications

    Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C153–H and the API Certification mark. LUBRICANT SPECIFICATIONS…

  • Page 211
    (High Temp.) Engine coolant Motorcraft VC-7–A WSS- Premium Gold M97B51-A1 Engine Coolant (yellow-colored) Power steering Motorcraft XT-2-QDX MERCON fluid MERCON ATF Windshield Motorcraft ZC-32–A WSB-M8B16–A2 washer fluid Windshield Washer Concentrate 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 212
    2615 (103) 2615 (103) (5) Track — 1494 (58.8) 1494 (58.8) 1494 (58.8) Front (5) Track — 1487 (58.5) 1487 (58.5) 1487 (58.5) Rear Overall height with roof rack is 1533 (60.4) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 213
    Maintenance and Specifications • Sedan 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 214
    Maintenance and Specifications • Coupe 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 215
    Certification label be affixed to a vehicle and prescribe where the Certification label may be located. The Certification label is located on the front door latch pillar on the driver’s side. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 216
    6. Model year 7. Assembly plant 8. Production sequence number Engine number The engine number (the last eight numbers of the vehicle identification number) is stamped on the engine block, transaxle, and frame. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 217
    Manual 5–speed overdrive (Close ratio) Manual 5–speed overdrive (Dana ZF) Manual 6–speed ZF Automatic transmission Automatic 4–speed overdrive (CD4E) Automatic 4–speed overdrive (4R70W) Automatic 4–speed overdrive (4R44E) Automatic 4–speed overdrive (4R100) Automatic 5–speed overdrive (5R55E) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 218
    4–speed overdrive (AX4S) 4–speed overdrive (4F20E) 4–speed overdrive (4F50N) 4–speed overdrive (CD4E) Rear wheel drive manual transaxle 5–speed (Mazda M5) Rear wheel drive automatic transmission 4–speed overdrive (4R70W) 5–speed overdrive (5R55N) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 219: Accessories

    In addition, each accessory is made from high quality materials and meets or exceeds Ford’s rigorous engineering and safety specifications. Ford Motor Company will repair or…

  • Page 220
    Door sill scuff plates Exterior B-pillar trim Flat splash guards Front end covers (full and mini) Ground effects kit Hood Deflectors Leather wrap steering wheel Molded splash guards Molded vinyl floor mats Projector headlamps 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 221
    (Citizens band [CB] transceivers, garage door openers and other transmitters with outputs of five watts or less will not ordinarily affect your vehicle’s operation.) • Ford cannot assume responsibility for any adverse effects or damage that may result from the use of such equipment. 2004 Focus (foc)

  • Page 222: Index

    ……..157 Battery ……..173 wheels ……..158 acid, treating emergencies ..173 wiper blades ……161 jumping a disabled battery ..139 maintenance-free ….173 Climate control (see Air replacement, specifications …207 conditioning or Heating) ..34–35 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

  • Page 223
    Engine ……..212 Cruise control (see Speed cleaning ……..158 control) ……..54 coolant ……..175 Customer Assistance ….126 idle speed control ….173 Ford accessories for your lubrication vehicle ……..163 specifications ….210, 212 Ford Extended Service refill capacities ……208 Plan ……….150 service points ….166–168 Getting assistance outside starting after a collision ..127…
  • Page 224
    Lights, warning and indicator ..10 Heating anti-lock brakes (ABS) ..112 heater only system ….34 Load limits ………119 Hood ……….165 Locks autolock ……..61 childproof ……..62 Lubricant specifications …210, 212 Ignition …….107, 212 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 225
    Starting your vehicle ……107–108, 110 Rear window defroster ….37 jump starting ……139 Relays ……..128 Steering wheel Remote entry system ….64 tilting ………51 locking/unlocking doors …61 Sunroof (moonroof) ….57 opening the trunk …..65 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 226
    ..169 (manual) ………194 operation ……..50 fluid, refill capacities ….208 replacing wiper blades …..51 lubricant specifications ..210 manual operation ….117 Wrecker towing ……147 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)

Источник

Введение

Об этом руководстве……………………………..7

Словарь символов…………………………………7

Запасные части и аксессуары………………..7

Быстрый обзор

Быстрый обзор…………………………………….10

Безопасность детей

Детские сиденья………………………………….21

Установка детского сиденья…………………22

Дополнительные подушки…………………….23

Места расположения креплений

ISOFIX……………………………………………..24

Замки с функцией блокировки от

отпирания детьми…………………………….25

Защита людей, находящихся в

автомобиле

Принципы работы………………………………..26

Пристегивание ремней безопасности……30

Регулировка высоты крепления ремня

безопасности……………………………………31

Использование ремней безопасности во

время беременности………………………..31

Дуги защиты при опрокидывании………….32

Отключение подушки безопасности

пассажира………………………………………..32

Ключи и пульты дистанци-

онного управления

Общая информация о радиочастотах…..34

Программирование пульта

дистанционного управления……………..34

Замена элемента питания пульта

дистанционного управления……………..36

Замки

Блокировка и разблокировка замков…….39

Система управления замками без помощи

ключа……………………………………………….43

Полное открывание/ закрывание………….48

Иммобилайзер двигателя

Принципы работы………………………………..51

Запрограммированные ключи………………51

Активация иммобилайзера

двигателя…………………………………………51

Отключение иммобилайзера

двигателя…………………………………………51

Сигнализация

Активация сигнализации………………………52

Отключение сигнализации……………………53

Рулевое колесо

Регулировка положения рулевого

колеса……………………………………………..55

Звуковой сигнал…………………………………..55

Управление аудиосистемой………………….55

Голосовое управление…………………………57

Педали

Регулировка положения педалей………….58

Стеклоочистители и стеклоомы-

ватели

Очистители ветрового стекла……………….59

Омыватели ветрового стекла……………….61

Очиститель и омыватели заднего

стекла………………………………………………61

Регулировка положения жиклеров

омывателей стекол…………………………..62

Омыватели фар…………………………………..62

Проверка щеток стеклоочистителей……..63

Замена щеток стеклоочистителей…………63

Осветительное оборудование

Органы управления осветительным

оборудованием…………………………………64

Адаптивное освещение………………………..65

Передние противотуманные фары……….65

1

Содержание

Источник

Ford Focus 2004 Owner's Manual

  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Automobile
  5. 2004 Focus
  6. Owner’s manual

  • Contents

  • Table of Contents

  • Bookmarks

Quick Links

AM/FM stereo cassette

AM/FM stereo with CD

Heater only

Manual heating and air conditioning

Headlamps

Mirrors

Locks

Table of Contents

10

16

34

38

50

62

4

10

14

16

19

34

35

37

38

42

50

51

53

53

54

62

62

65

1

loading

Related Manuals for Ford Focus 2004

Summary of Contents for Ford Focus 2004

  • Page 1
    Table of Contents Introduction Instrument Cluster Warning and control lights Gauges Entertainment Systems AM/FM stereo cassette AM/FM stereo with CD Climate Controls Heater only Manual heating and air conditioning Rear window defroster Lights Headlamps Turn signal control Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors…
  • Page 2
    Table of Contents Seating and Safety Restraints Seating Safety restraints Air bags Child restraints Driving Starting Brakes Traction control Transmission operation Vehicle loading Trailer towing Recreational towing Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Jump starting Wrecker towing…

  • Page 3: Table Of Contents

    Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2003 Ford Motor Company…

  • Page 4
    State of California to cause cancer and birth defects or other reproductive harm. CONGRATULATIONS Congratulations on acquiring your new Ford. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it.
  • Page 5
    Introduction SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment? In this guide, answers to such questions are contained in comments highlighted by the warning triangle symbol.
  • Page 6
    In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may access vehicle diagnostic information through a direct connection to your vehicle when diagnosing or servicing your vehicle.
  • Page 7
    • where the driver was positioning the steering wheel. To access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent,…
  • Page 8
    Introduction These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Child Seat Installation Child Seat Lower Warning Anchor Child Seat Tether Brake System Anchor Brake Fluid -…
  • Page 9
    Introduction Vehicle Symbol Glossary Power Windows Power Window Lockout Front/Rear Interior Luggage Child Safety Door Compartment Release Lock/Unlock Symbol Panic Alarm Engine Oil Engine Coolant Engine Coolant Temperature Do Not Open When Hot Battery Avoid Smoking, Flames, Battery Acid or Sparks Explosive Gas Fan Warning Maintain Correct Fluid…

  • Page 10: Instrument Cluster

    Instrument Cluster Instrument Cluster WARNING LIGHTS AND CHIMES Standard instrument cluster Optional instrument cluster 2.3L 14 PZEV instrument cluster Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’s functions.

  • Page 11
    Instrument Cluster Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains on after starting the vehicle, have the respective system inspected immediately. Check engine: The Check Engine indicator light illuminates when the ignition is first turned to the ON position to check the bulb.
  • Page 12
    Instrument Cluster Driving a vehicle with the brake system warning light on is dangerous. A significant decrease in braking performance may occur. It will take you longer to stop the vehicle. Have the vehicle checked by your dealer immediately. Anti-lock brake system: If the ABS light stays illuminated or continues to flash, a malfunction has been detected, have the system…
  • Page 13
    Instrument Cluster Overdrive off (if equipped): Illuminates when the overdrive function of the transaxle has been turned off, refer to the Driving chapter. If the light flashes steadily or does not illuminate, have the transmission serviced soon, or damage may occur. Upshift (if equipped): To maximize fuel economy, this light illuminates when the manual…
  • Page 14
    Instrument Cluster High beams: Illuminates when the high beam headlamps are turned on. Key-in-ignition warning chime: Sounds when the key is left in the ignition in the OFF/LOCK or ACCESSORY position and the driver’s door is opened. Headlamps on warning chime: Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) and the driver’s door is opened.
  • Page 15
    Instrument Cluster the red section and the Check Engine indicator light illuminates, refer to How fail safe cooling works in coolant in the Maintenance and Specifications chapter. Never remove the coolant reservoir cap while the engine is running or hot. Odometer: Registers the total kilometers (miles) of the vehicle.

  • Page 16: Entertainment Systems

    Entertainment Systems Entertainment Systems AM/FM STEREO WITH CASSETTE (IF EQUIPPED) 1. Cassette door: Insert the cassette with the opening to the right. 2. Rewind/fast forward: Press to reverse/advance to the previous/next cassette selection. If the end of the tape is reached, playback begins on the other side. Partially press both to change tape sides.

  • Page 17
    AM/FM to activate. AST will flash in the display. When the six strongest stations are filled, the sound will be restored. 8. Anti-theft protection panel: To deter would-be thieves, Ford audio units have a removable front panel without which the unit will not work.
  • Page 18
    Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: • Your name and address.
  • Page 19
    Entertainment Systems AM/FM STEREO WITH CD PLAYER (IF EQUIPPED) 1. CD door: Insert the CD label side up. 2. CD: Press to engage CD mode. CDs and tracks are selected and played chronologically. Press the AM/FM control to restore radio reception without ejecting the disc. 3.
  • Page 20
    To reposition the panel, insert the right-hand edge first, then the left-hand side, until the retaining latch is engaged. Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: •…
  • Page 21
    Entertainment Systems • A vehicle invoice (if the audio unit was installed in the vehicle prior to delivery) or a parts invoice if the audio unit was purchased separately form the vehicle, or an appropriate vehicle registration document. 8. Clock: Press and hold until the hour digit flashes.
  • Page 22
    Entertainment Systems 6006 AM/FM SOUND SYSTEM WITH 6–DISC IN DASH CHANGER (IF EQUIPPED) 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 23
    Entertainment Systems 9006 AM/FM SOUND SYSTEM WITH 6–DISC IN DASH CHANGER (IF EQUIPPED) 1. CD Door: Insert the disc with the playing side down and printed side up. 2. Load: Press to load a CD. WAIT LOAD will appear in the display then change to INSERT.
  • Page 24
    Entertainment Systems CD eject during playback: Press the eject control during CD playback to eject the CD. Press again to cancel the eject process. To eject another disc, press the preset control that corresponds to the desired disc then press EJ. EJECT CD will appear in the display. REMOVE will appear as the disc is held ready to be removed.
  • Page 25
    Replacement panels: Your Ford Dealer will require the following if you need to order a replacement panel: • Your name and address.
  • Page 26
    Entertainment Systems 11. Scan: Press SCAN to move up SCAN the radio frequency band. SCAN automatically finds a station, plays it for five seconds, then moves to the next station. Press again to stop. CD: Press SCAN to sample CD selections for eight seconds. Press again to stop.
  • Page 27
    Entertainment Systems IN-DASH CD/MP3 SOUND SYSTEM (IF EQUIPPED) 1. CD door: Insert a CD or MP3 label side up. 2. Soft keys: Press to make various selections in the audio menus. 3. Mute: Press to mute the playing MUTE media. Press again to return. (Turning the volume control will also disable the mute feature).
  • Page 28
    Entertainment Systems SHF ALB appears in the display. Press again for a brief sampling of all MP3 directories on the disc. SCAN ALL appears at the bottom of the display. 6. Shuffle: CD/CD changer: Press SHUF to play the songs on the current CD in random order.
  • Page 29
    Entertainment Systems Sharx: This function reduces the amount of interference from other radio stations in areas with a high density of stations. Select AUDIO and press ENTER. Select SHARX and press ENTER. Turn the control to turn the function on/off. Press ENTER to save the setting. Program type (PTY): When selected, this function allows you to view the radio broadcast information (if any) or search for stations broadcasting a particular program type.
  • Page 30
    Entertainment Systems Traffic Announcements: When activated, the audio unit will automatically switch from the current playing media to a traffic announcement when received. When the announcement is over, the system will return to the current playing media. Select AUDIO and press ENTER.
  • Page 31
    Entertainment Systems 15. Seek: In radio mode, press to locate radio stations up or down the frequency band. To store a station, press and hold the soft key (next to the desired frequency) until you hear a beep. This indicates the station has been stored. To select a station, press the soft key next to the desired frequency.
  • Page 32
    Entertainment Systems MP3 INFORMATION • When the system is playing an MP3 disc, the directory name, track name and artist name are shown in the display. The directory number also appears in the left hand corner of the display. • A maximum of 20 directories is recommended as additional directories will increase the access time.
  • Page 33
    Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player.

  • Page 34: Climate Controls

    Climate Controls Climate Controls HEATER ONLY SYSTEM (IF EQUIPPED) 1. Air flow selections: Controls the direction of the airflow in the cabin. See the following for a brief description on each control. : Distributes air through the instrument panel vents. : Distributes air through the instrument panel vents and the floor vents.

  • Page 35
    Climate Controls To allow side window defogging and demisting while warming up the vehicle cabin: 1. Select 2. Set the temperature control to full heat. 3. Set the fan speed to the highest setting. 4. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel.
  • Page 36
    Climate Controls Recirculated air: Press to activate/deactivate air recirculation in the vehicle cabin. Recirculated air may reduce the amount of time required to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculated air will not function in or any position in between…
  • Page 37
    Climate Controls REAR WINDOW DEFROSTER The rear defroster control is located on the instrument panel. Press the rear defroster control to clear the rear window of thin ice and fog. • A small LED will illuminate when the rear defroster is activated. The ignition must be in the ON position to operate the rear window defroster.
  • Page 38
    Lights Lights HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. Turns the headlamps on. Foglamp control (if equipped) The headlamp control also operates the foglamps. The foglamps can be turned on when the headlamp control is in the position and…
  • Page 39
    Lights High beams Push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate. Flash to pass Pull toward you slightly to activate and release to deactivate. PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel during headlight and parklamp operation.
  • Page 40
    Lights VERTICAL AIM ADJUSTMENT Your vehicle is fitted with either VOR (conventional halogen) or VOL (High Intensity Discharge — HID) headlamps. The adjustment procedure depends on the type of headlamps that are equipped on your vehicle. VOR is marked on the bottom inboard corner of the lens. VOL is marked on the top of the lens between the rubber seal and black plastic housing.
  • Page 41
    Lights VOL (HID) 1. Park the vehicle on a level surface approximately 7.6 meters (25 feet) from a vertical wall or screen directly in front of it. 2. Measure the height of the headlamp bulb center from the ground, subtract 53.3 mm (2.1 inches), and make 2.5 meters (8 foot) horizontal reference line on the vertical wall or screen at this…
  • Page 42
    Lights TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. INTERIOR LAMPS Dome lamps The dome lamp is equipped with a control switch that will illuminate when: • the doors are closed and the switch is in the on position.
  • Page 43
    Lights BULBS Replacing exterior bulbs Check the operation of all the bulbs frequently. Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America to assure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
  • Page 44
    Lights Replacing headlamp bulbs Make sure the headlamp switch is in the OFF position. To remove the high or low beam headlamp bulb: 1. Lift the hood and remove the bulb cover. 2. Swivel the wire clip to the side and pull out the lamp.
  • Page 45
    3. Pull the bulb straight out of the bulb socket. Note: On vehicles fitted with VOL (HID) headlamps, have your Ford dealer change the park lamp bulbs. 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 46
    Lights Replacing tail/brake/backup lights and turn signal bulbs (coupe) 1. Make sure the headlamp control is in the OFF position and then open the hatchback. 2. From inside the luggage compartment remove the wing nut of the rear light assembly cover. 3.
  • Page 47
    Lights Replacing tail/brake/backup lights and turn signal bulbs (wagon) 1. Make sure the headlamp control is in the OFF position and then open the hatchback. 2. Using a screwdriver remove the fixings and trim from the body. 3. Remove the socket from the lamp assembly 4.
  • Page 48
    Lights Replacing high-mount brake lamp bulbs Sedan 1. Make sure the headlamp control is in the OFF position and open the luggage compartment. 2. Using a screwdriver remove the trim from the tailgate. 3. Pull the bulb holder from the lamp assembly.
  • Page 49
    Lights Replacing the luggage compartment lamp 1. Make sure the headlamp control is in the OFF position. 2. Carefully pry out the light assembly from the holder with a flathead screwdriver. 3. Pull the bulb straight out. Install in reverse order. Replacing interior lamps 1.

  • Page 50: Driver Controls

    Driver Controls Driver Controls MULTI-FUNCTION LEVER Windshield wiper: Move the lever down for a single wipe. For intermittent operation, move control up one position and adjust the rotary control to the desired speed. For normal operation, move control up two positions. For high speed operation, move control up three positions.

  • Page 51
    Driver Controls Changing the wiper blades 1. Pull the wiper arm away from the vehicle. Turn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm.
  • Page 52
    Driver Controls HORN Press the steering wheel pad. The horn can be operated when the ignition is off. AUXILIARY POWER POINT (IF EQUIPPED) Power point outlets are designed for accessory use only. Do not hang any type of accessories or accessory bracket from the their plugs.
  • Page 53
    Driver Controls POWER WINDOWS (IF EQUIPPED) When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in the proximity of the window openings. Press and hold the bottom part of the rocker switch to open the window.
  • Page 54
    Driver Controls Heated mirrors (if equipped) Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place.
  • Page 55
    Driver Controls 3. Press the SET ACCEL control and release it. 4. Take your foot off the accelerator pedal. 5. The indicator light on the instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill.
  • Page 56
    Driver Controls Increasing speed while using speed control There are two ways to set a higher speed: • Press and hold the SET ACCEL control until you get to the desired speed, then release the control. You can also use the SET ACCEL control to operate the Tap-Up function.
  • Page 57
    Driver Controls Turning off speed control Press the speed control OFF control. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. MOON ROOF (SUNROOF) (IF EQUIPPED) You can move the glass panel of the moon roof back to open or tilt up to ventilate the vehicle.
  • Page 58
    The moon roof will move about 0.5 seconds at a time and then stop again. Press the switch repeatedly until the moon roof is closed. Have the system checked by your Ford Dealer immediately. REMOTE LUGGAGE COMPARTMENT RELEASE (IF EQUIPPED) To open the luggage compartment, press the control.
  • Page 59
    Driver Controls and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits. Mobile Communication Equipment includes, but is not limited to cellular phones, pagers, portable email devices, in vehicle communications systems, telematics devices and portable two-way radios.
  • Page 60
    Driver Controls Wagon Pull out the roller cover and secure the retaining points. The cover can be removed completely by pressing inward on both ends of the support. To reduce the risk of injury, the luggage cover must be properly attached to the mounting clips.
  • Page 61
    Driver Controls Do not leave the liftgate open while driving. Doing so could cause serious damage to the liftgate and its components as well as allowing carbon monoxide to enter the vehicle. Make sure that the liftgate door is closed to prevent exhaust fumes from being drawn into the vehicle.

  • Page 62: Locks And Security

    Locks and Security Locks and Security KEYS The key operates all locks on your vehicle. In case of loss, replacement keys are available from your dealer. You should always carry a second key with you in a safe place in case you require it in an emergency.

  • Page 63
    Locks and Security To deactivate/reactivate the autolock feature using the power door unlock control You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1.
  • Page 64
    Locks and Security INTERIOR LUGGAGE COMPARTMENT RELEASE Your vehicle is equipped with a mechanical interior luggage compartment release handle that provides a means of escape for children and adults in the event they become locked inside the luggage compartment. Adults are advised to familiarize themselves with the operation and location of the release handle.
  • Page 65
    Locks and Security REMOTE ENTRY SYSTEM (IF EQUIPPED) This device complies with part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 66
    Locks and Security Unlocking the doors 1. Press and release to unlock the driver’s door. Note: The interior lamps will illuminate. 2. With the all-door remote entry, press and release again within three seconds to unlock all the doors. The remote entry system activates the illuminated entry feature. This feature turns on the interior lamps for 25 seconds or until the ignition is turned to the 3 (ON) position.
  • Page 67
    Locks and Security Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent. To replace the battery: 1. Twist a thin coin between the two halves of the remote entry transmitter near the key ring. DO NOT TAKE THE RUBBER COVER AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE…
  • Page 68
    Programming spare keys for instructions on how to program the coded key. Note: The SecuriLock passive anti-theft system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 69
    Locks and Security Note: Large metallic objects, electronic devices that are used to purchase gasoline or similar items, or a second coded key on the same key chain may cause vehicle starting issues. You need to prevent these objects from touching the coded key while starting the engine. These objects will not cause damage to the coded key, but may cause a momentary issue if they are too close to the key when starting the engine.
  • Page 70
    Locks and Security • If two previously programmed coded keys are not available, you must take your vehicle to your dealer to have the spare key(s) programmed. 1. Insert a previously programmed coded key into the ignition. 2. Turn the ignition from the 3 (OFF) position to the 4 (ON) position. Keep the ignition in the 4 (ON) position for at least one second, but no more than 10 seconds.
  • Page 71
    Locks and Security To program additional new unprogrammed key(s), repeat this procedure from Step 1 for each additional key. PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter anti-theft system will warn you in the event of an unauthorized entry to your vehicle. If there is any potential perimeter anti-theft problem with your vehicle, ensure ALL remote entry transmitters are taken to the dealership to aid in troubleshooting.

  • Page 72: Seating And Safety Restraints

    Seating and Safety Restraints Seating and Safety Restraints SEATING Notes: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop.

  • Page 73
    Seating and Safety Restraints Adjusting the front manual seat Pull the lever located under the front edge of the seat to move the seat forward or backward. Turn the control to adjust the lumbar support (if equipped). Turn the handle to adjust the height of the seat.
  • Page 74
    Seating and Safety Restraints Heated seats (if equipped) The heated seats switch is located on the center console. To operate the heated seats: • Push control to activate. • Push again to deactivate. The maximum temperature is reached after five or six minutes. The indicator light on the switch is illuminated when activated.
  • Page 75
    Seating and Safety Restraints On three door models, front safety belts should be pulled backwards to allow easier entry to or exit from the rear seats. Do not place objects behind the seat which could prevent the engagement of the seat lock. REAR SEATS Folding rear seat cushion forward Lift the seat cushion and pull it…
  • Page 76
    Seating and Safety Restraints Folding the rear seat back forward Coupe and wagon Remove the head restraints (if equipped) of the rear seats and stow them on the floor behind the front seats. Push the unlocking control on the rear seatback and fold the rear seatback forward.
  • Page 77
    Seating and Safety Restraints Folding the seat cushion and seatback forward Pull the loop between the respective seat cushion and seatback, and fold the seat cushion on that side forward. Remove the head restraint(s) (if equipped) of the rear seat, and fold the seatback forward.
  • Page 78
    Seating and Safety Restraints How does the personal safety system work? The Personal Safety System can adapt the deployment strategy of your vehicle’s safety devices according to crash severity and conditions. A collection of crash sensors provides information to the Restraints Control Module (RCM).
  • Page 79
    Seating and Safety Restraints Front safety belt pretensioners The safety belt pretensioners are designed to tighten the safety belts firmly against the occupant’s body during a collision. This maximizes the effectiveness of the safety belts and helps properly position the occupant relative to the air bag to improve protection.
  • Page 80
    Seating and Safety Restraints Safety belt precautions Always drive and ride with your seatback upright and the lap belt snug and low across the hips. To reduce the risk of injury, make sure children sit where they can be properly restrained. Never let a passenger hold a child on his or her lap while the vehicle is moving.
  • Page 81
    Seating and Safety Restraints Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.
  • Page 82
    Seating and Safety Restraints The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts. The front passenger and rear seat safety belts have two types of locking modes. Vehicle sensitive mode The vehicle sensitive mode is the normal retractor mode, allowing free shoulder belt length adjustment to your movements and locking in response to vehicle movement.
  • Page 83
    This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode Ford Motor Company recommends that all passenger safety belt assemblies and attaching hardware should be inspected by a qualified technician after any collision to verify that the automatic locking retractor feature for child seats is still working properly.
  • Page 84
    Seating and Safety Restraints Failure to replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. Front safety belt height adjustment Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.
  • Page 85
    Seating and Safety Restraints Conditions of operation If… Then… The driver’s safety belt is not The safety belt warning light buckled before the ignition illuminates 1-2 minutes and the switch is turned to the ON warning chime sounds 4-8 seconds. position…
  • Page 86
    Seating and Safety Restraints The following are reasons most often given for not wearing safety belts: (All statistics based on U.S. data) Reasons given… Consider… “Crashes are rare events” 36700 crashes occur every day. The more we drive, the more we are exposed to “rare”…
  • Page 87
    Seating and Safety Restraints Reasons given… Consider… “I have an air bag” Air bags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear and side crashes or rollovers. “I’d rather be thrown clear” Not a good idea.
  • Page 88
    Seating and Safety Restraints BeltMinder activation and deactivation procedure 1. Turn the ignition switch to the RUN (or ON) position. (DO NOT START THE ENGINE.) 2. Wait until the safety belt warning light turns off. (Approximately 1–2 minutes.) • Steps 3–5 must be completed within 60 seconds or the procedure will have to be repeated.
  • Page 89
    (if equipped), shoulder belt guide on seatback (if equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a collision. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced.
  • Page 90
    Seating and Safety Restraints AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries. Air bags DO NOT inflate slowly or gently, and the risk of injury from a deploying air bag is the greatest close to the trim covering the air bag module.
  • Page 91
    Do not attempt to service, repair, or modify the air bag supplemental restraint systems or its fuses. See your Ford or Lincoln Mercury dealer. 2004 Focus (foc)
  • Page 92
    Seating and Safety Restraints Children and air bags Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these instructions may increase the risk of injury in a collision.
  • Page 93
    Seating and Safety Restraints The air bags inflate and deflate rapidly upon activation. After air bag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the…
  • Page 94
    Seating and Safety Restraints • diagnostic module. • and the electrical wiring which connects the components. The diagnostic module monitors its own internal circuits and the supplemental air bag electrical system wiring (including the impact sensors), the system wiring, the air bag system readiness light, the air bag back up power and the air bag ignitors.
  • Page 95
    Do not attempt to service, repair, or modify the air bag SRS, its fuses or the seat cover on a seat containing an air bag. See your Ford or Lincoln Mercury dealer. All occupants of the vehicle should always wear their safety belts even when an air bag SRS is provided.
  • Page 96
    Seating and Safety Restraints The fact that the air bags did not inflate in a collision does not mean that something is wrong with the system. Rather, it means the forces were not of the type sufficient to cause activation. Side air bags are designed to inflate in side-impact collisions, not roll-over, rear-impact, frontal or near-frontal collisions, unless the collision causes sufficient lateral deceleration.
  • Page 97
    Seating and Safety Restraints Accident statistics indicate that children are safer when properly restrained in the rear seats. Do not leave children, unreliable adults, or pets unattended in your vehicle. Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather, they could burn a small child.
  • Page 98
    To improve the fit of both the lap and shoulder belt on children who have outgrown child safety seats, Ford Motor Company recommends use of a belt-positioning booster. Booster seats position a child so that safety belts fit better. They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably.
  • Page 99
    Seating and Safety Restraints Types of booster seats There are two types of belt-positioning booster seats: • Those that are backless. If your backless booster seat has a removable shield, remove the shield and use the lap/shoulder belt. If a seating position has a low seat back and no head restraint, a backless booster seat may place your child’s head (top…
  • Page 100
    Seating and Safety Restraints Follow all instructions provided by the manufacturer of the booster seat. Never put the shoulder belt under a child’s arm or behind the back because it eliminates the protection for the upper part of the body and may increase the risk of injury or death in a collision. Never use pillows, books, or towels to boost a child.
  • Page 101
    36 kg (80 pounds) using an upper torso harness and a belt-positioning booster. Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position with LATCH and tether anchors.
  • Page 102
    Seating and Safety Restraints 1. Position the child safety seat in a seat with a combination lap and shoulder belt. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat…
  • Page 103
    Seating and Safety Restraints 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
  • Page 104
    Seating and Safety Restraints 8. Allow the safety belt to retract to remove any slack in the belt. 9. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward.
  • Page 105
    Seating and Safety Restraints 1. Position the child safety seat on the seat cushion. 2. Route the child safety seat tether strap over the back of the seat. On hatchbacks, the removable luggage area cover must be removed prior to attaching the tether strap to the tether anchor. On wagons, it may be necessary to remove the cargo cover assembly prior to attaching the tether strap to the tether anchor.
  • Page 106
    Seating and Safety Restraints 5. Clip the tether strap to the anchor as shown. If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a collision. 6. Install the child safety seat tightly using the LATCH anchors or safety belts.
  • Page 107
    Seating and Safety Restraints LATCH anchors for child seat installation have been provided in your vehicle at the following locations: The anchors on both sides of the center of the rear seat are provided primarily for child seats at the outboard seats and are further apart than the pairs of lower anchors for child seat installation at other seats.
  • Page 108
    Driving Driving STARTING Positions of the ignition 1. LOCK, locks the steering wheel, automatic transaxle gearshift lever and allows key removal. 2. OFF, shuts the engine and all electrical accessories off without locking the steering wheel.The audio system will still function. 3.
  • Page 109
    Driving If you smell exhaust fumes inside your vehicle, have your dealer inspect your vehicle immediately. Do not drive if you smell exhaust fumes. Important safety precautions When the engine starts, the idle RPM runs faster to warm the engine. If the engine idle speed does not slow down automatically, have the vehicle checked.
  • Page 110
    Driving If starting a vehicle with a manual transaxle: 1. Make sure the parking brake is set. 2. Push the clutch pedal to the floor. • Turn the key to 3 (ON) without turning the key to 4 (START). 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 111
    Driving Make sure the corresponding lights illuminate or illuminate briefly. If a light fails to illuminate, have the vehicle serviced. • If the driver’s safety belt is fastened, the light may not illuminate. Starting the engine 1. Turn the key to 3 (ON) without turning the key to 4 (START).
  • Page 112
    Driving Guarding against exhaust fumes Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects. If you smell exhaust fumes inside your vehicle, have your dealer inspect your vehicle immediately. Do not drive if you smell exhaust fumes.
  • Page 113
    Driving effectiveness of the ABS and will increase your vehicle’s stopping distance. The ABS will be activated immediately, allowing you to retain full steering control during hard braking and on slippery surfaces. However, the ABS does not decrease stopping distance. ABS warning lamp The ABS lamp in the instrument cluster momentarily illuminates…
  • Page 114
    Driving TRACTION CONTROL (IF EQUIPPED) Your vehicle may be equipped with a Traction Control system. This system helps you maintain the stability and steerability of your vehicle, especially on slippery road surfaces such as snow- or ice-covered roads and gravel roads. The system will allow your vehicle to make better use of available traction in these conditions.
  • Page 115
    Driving STEERING To prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than a few seconds when the engine is running. • Do not operate the vehicle with a low power steering pump fluid level (below the MIN mark on the reservoir).
  • Page 116
    Driving 2. Using a screwdriver (or similar tool), remove the protective cover to the interlock access hole on the console. Insert the key to release the interlock. 3. Apply the parking brake, then shift to N (Neutral). 4. Start the vehicle. If it is necessary to use the above procedure to move the gearshift lever, it is possible that a fuse has blown or the vehicle’s brakelamps are not operating properly.
  • Page 117
    Driving upshifts and downshifts; during this learning process, slightly firmer shifts may occur. After this learning process, normal shift feel and shift scheduling will resume. P (Park) This position locks the transaxle and prevents the front wheels from turning. To put your vehicle in gear: •…
  • Page 118
    Driving D (Overdrive) The normal driving position for the best fuel economy; transaxle operates in gears one through four. D (Overdrive) can be deactivated by pressing the transaxle control switch on the end of the gearshift lever. This will illuminate the O/D OFF lamp and activate Drive. Drive (not shown) Drive is activated when the transaxle control switch is pressed.
  • Page 119
    Driving If your vehicle gets stuck in mud or snow If your vehicle gets stuck in mud or snow, it may be rocked out by shifting from forward and reverse gears, stopping between shifts in a steady pattern. Press lightly on the accelerator in each gear. If necessary, try turning the Traction Control system off.
  • Page 120
    Driving Recommended shift speeds Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transaxle Shift from: 1 — 2 14 mph (23 km/h) 2 — 3 25 mph (40 km/h) 3 — 4 36 mph (58 km/h) 4 — 5 45 mph (72 km/h)
  • Page 121
    Driving DRIVING THROUGH WATER If driving through deep or standing water is unavoidable, proceed very slowly especially if the depth is not known. Never drive through water that is higher than the bottom of the hubs (for trucks) or the bottom of the wheel rims (for cars).
  • Page 122
    Driving GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label located on the driver’s door or door pillar. The total load on each axle must never exceed its GAWR.
  • Page 123
    Driving Exceeding the Safety Certification Label axle weight rating limits could result in substandard vehicle handling, performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer.
  • Page 124
    Driving Do not use replacement tires with lower load carrying capacities than the originals because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the originals do not increase the GVWR and GAWR limitations. Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury.
  • Page 125
    Driving If you use a rental trailer, follow the instructions that the rental agency gives to you. Do not attach safety chains to the bumper. Trailer brakes Electric brakes and manual, automatic or surge-type trailer brakes are safe if installed properly and adjusted to the manufacturer’s specifications.
  • Page 126
    Driving • Allow more distance for stopping with a trailer attached. • If you are driving down a long or steep hill, shift to a lower gear. Do not apply the brakes continuously, as they may overheat and become less effective. •…

  • Page 127: Roadside Emergencies

    Roadside Emergencies Roadside Emergencies GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: •…

  • Page 128
    Roadside Emergencies Canadian customers who require roadside assistance, call 1–800–665–2006. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount. To obtain reimbursement information, U.S. Ford or Mercury vehicles customers call 1-800-241-3673; Lincoln vehicle customers call 1–800–521–4140.
  • Page 129
    Roadside Emergencies This switch is located in the front passenger’s footwell, behind the kick panel access cover. To reset the switch: 1. Turn the ignition OFF. 2. Check the fuel system for leaks. 3. If no leaks are apparent, reset the switch by pushing in on the reset button.
  • Page 130
    Roadside Emergencies Standard fuse amperage rating and color COLOR Cartridge Fuse Mini Standard Maxi Fuse link maxi rating fuses fuses fuses cartridge fuses Grey Grey — — — Violet Violet — — — Pink Pink — — — — — —…
  • Page 131
    Roadside Emergencies The fuses are coded as follows. Fuse/Relay Fuse Amp Passenger Compartment Fuse Location Rating Panel Description — Starter relay – Rear intermittent relay — Front wiper intermittent relay — Not used — Not used — Decklid/Liftgate release relay —…
  • Page 132
    Roadside Emergencies Fuse/Relay Fuse Amp Passenger Compartment Fuse Location Rating Panel Description Horn, Power seats (SVT only) Power sunroof 7.5A Interior lamps, Power mirrors 7.5A A/C switch, Hazard flasher, Instrument cluster Decklid/Liftgate release — Not used — Not used Backup lamps (automatic transaxle) 7.5A Radio and cluster (accessory)
  • Page 133
    Roadside Emergencies Fuse/Relay Fuse Amp Passenger Compartment Fuse Location Rating Panel Description 7.5A PATS modules, Instrument cluster 7.5A License plate lamp Power locks (GEM) Fuse 63 is located on the back of the fuse panel. See your dealer or a certified technician for service of this fuse.
  • Page 134
    Roadside Emergencies To remove a fuse, use the fuse puller tool provided on the power distribution box cover. The high-current fuses are coded as follows: Fuse/Relay Fuse Amp Power Distribution Box Location Rating Description Main power supply to electrical system Engine cooling fan (A/C) 2nd fuse Cooling fan (2.0L engine only) Air pump motor…
  • Page 135
    Roadside Emergencies Fuse/Relay Fuse Amp Power Distribution Box Location Rating Description Battery voltage sensor (2.0L engine only) (2.3L engine only) Anti-lock Brake System (ABS) Fuel pump — Not used — Not used A/C clutch solenoid Low beam (left side — conventional headlamps) Low beam (left side — HID headlamps)
  • Page 136
    Roadside Emergencies Fuse/Relay Fuse Amp Power Distribution Box Location Rating Description — Not used High beams (right and left) — Not used Cooling fan (2.3L engine only) Heater blower motor — Ignition relay — Air pump motor relay (2.3L engine only) —…
  • Page 137
    Roadside Emergencies CHANGING A FLAT TIRE If you get a flat tire while driving: • do not brake heavily. • gradually decrease the vehicle’s speed. • hold the steering wheel firmly. • slowly move to a safe place on the side of the road. The use of tire sealants may damage your tires.
  • Page 138
    Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
  • Page 139
    Roadside Emergencies Tire change procedure 1. Park on a level surface, activate hazard flashers and set the parking brake. When one of the front wheels is off the ground, the transaxle alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatic transaxle) or R (Reverse) (manual transaxle).
  • Page 140
    Roadside Emergencies 4. On coupe models, unsnap and remove the access door (if equipped) on the lower rocker molding (SVT only) to access the proper jacking points. 5. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground.
  • Page 141
    Roadside Emergencies 6. The vehicle jacking points are depicted on the yellow warning label on the jack shown here. Depending on which tire is to be changed, locate the jack at the half-moon cutout located approximately six inches (15 cm) from the front wheel opening (1) or approximately 15 inches (38 cm) from the rear wheel opening (2).
  • Page 142
    Roadside Emergencies Do not attempt to push-start your vehicle. Automatic transmissions do not have push-start capability; doing so may damage the catalytic converter. Preparing your vehicle When the battery is disconnected or a new battery is installed, the transmission must relearn its shift strategy. As a result, the transmission may have firm and/or soft shifts.
  • Page 143
    Roadside Emergencies 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 144
    Roadside Emergencies 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’s engine, away from the battery and the carburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped.
  • Page 145
    Roadside Emergencies • 2.0L Zetec engine • 2.3L PZEV engine 5. Ensure that the cables are clear of fan blades, belts, moving parts of both engines, or any fuel delivery system parts. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 146
    Roadside Emergencies Jump starting 1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
  • Page 147
    Roadside Emergencies 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’s battery. After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions.
  • Page 148
    It is recommended that your vehicle be towed with a wheel lift or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. If your vehicle is to be towed from the rear using wheel lift equipment, the front wheels (drive wheels) must be placed on a dolly to prevent damage to the transmission.

  • Page 149: Customer Assistance

    Center at the number below. Away from home If you own a Ford or Mercury vehicle and are away from home when your vehicle needs service, or if you need more help than the dealership could provide, after following the steps described above, contact the Ford Customer Relationship Center to find an authorized dealership to help you.

  • Page 150
    If you own a Lincoln vehicle and are away from home when your vehicle needs service, or if you need more help than the dealership could provide, after following the steps described above, contact the Ford Customer Relationship Center to find an authorized dealership to help you.
  • Page 151
    5,000 participating Ford or Lincoln Mercury and Ford of Canada dealers. If you did not take advantage of the Ford Extended Service Plan at the time of purchasing your vehicle, you may still be eligible. Since this information is subject to change, please ask your dealer for complete details about Ford Extended Service Plan coverage options, or visit the Ford ESP website at www.ford-esp.com.
  • Page 152
    THE DISPUTE SETTLEMENT BOARD (U.S. ONLY) The Dispute Settlement Board is: • an independent, third-party arbitration program for warranty disputes. • available free to owners and lessees of qualifying Ford Motor Company vehicles. The Dispute Settlement Board may not be available in all states. Ford…
  • Page 153
    • The name of the dealer(s) who sold or serviced the vehicle. • A brief description of your unresolved concern. • A brief summary of the action taken by the dealer(s) and Ford Motor Company. • The names (if known) of all the people you contacted at the dealership(s).
  • Page 154
    After a case is reviewed, the Board mails you a decision letter and a form on which to accept or reject the Board’s decision. The decisions of the Board are binding on Ford (and, in some cases, on the dealer) but not on consumers who are free to pursue other remedies available to them under state or federal law.
  • Page 155
    UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY) In those cases where you continue to feel that the efforts by Ford and the dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
  • Page 156
    If your vehicle must be serviced while you are traveling or living in Central or South America, the Caribbean, or the Middle East, contact the nearest Ford dealership. If the dealership cannot help you, write or call: FORD MOTOR COMPANY…
  • Page 157
    In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126…
  • Page 158
    However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1–800–424–9393 (or 366–0123 in the Washington D.C.
  • Page 159
    Cleaning Cleaning WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutral Ph shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is available from your dealer. • Never use strong household detergents or soap, such as dish washing or laundry liquid.
  • Page 160
    Cleaning PAINT CHIPS Your dealer has touch-up paint and sprays to match your vehicle’s color. Take your color code (printed on a sticker in the driver’s door jam) to your dealer to ensure you get the correct color. • Remove particles such as bird droppings, tree sap, insect deposits, tar spots, road salt and industrial fallout before repairing paint chips.
  • Page 161
    Cleaning • Spray Motorcraft Engine Shampoo and Degreaser (ZC-20) on all parts that require cleaning and pressure rinse clean. • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. • Cover the highlighted areas to prevent water damage when cleaning the engine.
  • Page 162
    Cleaning • Do not use fuel, kerosene, or paint thinner to clean any parts. • Wiper blades can be cleaned with isopropyl (rubbing) alcohol or windshield washer solution. Be sure to replace wiper blades when they appear worn or do not function properly. Do not use sharp objects, such as a razor blade, to clean the inside of the rear window or to remove decals, as it may cause damage to the rear window defroster’s heated grid lines.
  • Page 163
    FORD, LINCOLN AND MERCURY CAR CARE PRODUCTS Your Ford, Lincoln or Mercury dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle.
  • Page 164
    Motorcraft Wheel and Tire Cleaner (ZC-37–A) Motorcraft Dash and Vinyl Cleaner (ZC-38–A) Motorcraft Car Care Kit (ZC-26) Ford Premium Car Wash Concentrate (F2SZ-19523–WC) Motorcraft Carlite Glass Cleaner (Canada only) (CXC-100) Motorcraft Spot and Stain Remover (ZC-14) Motorcraft Detail Wash (ZC-3–A)

  • Page 165: Maintenance And Specifications

    Maintenance and Specifications Maintenance and Specifications SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the engine compartment for easy location. • We provide a scheduled maintenance guide which makes tracking routine service easy. If your vehicle requires professional service, your dealership can provide the necessary parts and service.

  • Page 166
    Maintenance and Specifications Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. • Manual transmission: 1. Set the parking brake, depress the clutch and place the gearshift in N (Neutral).
  • Page 167
    Maintenance and Specifications IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.0L I4 SPI 1. Power steering fluid reservoir 2. Engine oil dipstick 3. Engine oil filler cap 4. Brake/Clutch fluid reservoir 5. Power distribution box 6. Air filter assembly 7. Windshield washer fluid reservoir 8.
  • Page 168
    Maintenance and Specifications 2.0L Zetec-E Engine 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake/Clutch fluid reservoir 4. Power distribution box 5. Air filter assembly 6. Windshield washer fluid reservoir 7. Battery 8. Automatic transaxle fluid dipstick (if equipped) 9.
  • Page 169
    Maintenance and Specifications 2.3L I4 PZEV Engine 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake/Clutch fluid reservoir 4. Power distribution box 5. Battery 6. Windshield washer fluid reservoir 7. Air filter service minder 8. Automatic transaxle fluid dipstick (if equipped) 9.
  • Page 170
    In very cold weather, do not fill the reservoir completely. Only use a washer fluid that meets Ford specification WSB-M8B16–A2. Refer to Lubricant specifications in this chapter. State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive.
  • Page 171
    Maintenance and Specifications 5. Locate and carefully remove the engine oil indicator (dipstick). • 2.0L SPI/2.3L I4engine • 2.0L Zetec engine 6. Wipe the indicator clean. Insert the indicator fully, then remove it again. • If the oil level is between the MIN and MAX marks(2.0L SPI/2.3 engine) or between ADD and FULL (2.0L Zetec engine), the oil level is acceptable.
  • Page 172
    Maintenance and Specifications • 2.0L Zetec • 2.3L I4 • If the oil level is below the MIN/ADD mark, add enough oil to raise the level within the MIN-MAX/ADD-FULL range. • Oil levels above the MAX/FULL mark may cause engine damage. Some oil must be removed from the engine by a service technician.
  • Page 173
    Only use oils “Certified For Gasoline Engines” by the American Petroleum Institute (API). To protect your engine’s warranty use Motorcraft SAE 5W-20 or an equivalent 5W-20 oil meeting Ford specification WSS-M2C153-H. SAE 5W-20 oil provides optimum fuel economy and durability performance meeting all requirements for your vehicle’s engine.
  • Page 174
    Maintenance and Specifications BATTERY Your vehicle is equipped with a Motorcraft maintenance-free battery which normally does not require additional water during its life of service. However, for severe usage or in high temperature climates, check the battery electrolyte level. Refer to the Scheduled Maintenance Guide for the service interval schedules.
  • Page 175
    Maintenance and Specifications When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery. Lift the battery with a battery carrier or with your hands on opposite corners.
  • Page 176
    Maintenance and Specifications If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected. • Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal.
  • Page 177
    Maintenance and Specifications When the engine is cold, check the level of the engine coolant in the reservoir. • The engine coolant should be at the “FULL COLD” level or within the “COLD FILL RANGE” as listed on the engine coolant reservoir (depending upon application).
  • Page 178
    Maintenance and Specifications • Add Motorcraft Premium Gold Engine Coolant (yellow-colored), VC-7–A (U.S., except CA and OR), VC-7–B (CA and OR only), meeting Ford Specification WSS-M97B51–A1. Note: Use of Motorcraft Cooling System Stop Leak Pellets, VC-6, may darken the color of Motorcraft Premium Gold Engine Coolant from yellow to golden tan.
  • Page 179
    Recycled engine coolant Ford Motor Company does NOT recommend the use of recycled engine coolant in vehicles originally equipped with Motorcraft Premium Gold Engine Coolant since a Ford-approved recycling process is not yet available.
  • Page 180
    Maintenance and Specifications Severe climates If you drive in extremely cold climates (less than –36° C [–34° F]): • It may be necessary to increase the coolant concentration above 50%. • NEVER increase the coolant concentration above 60%. • Increased engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage.
  • Page 181
    Maintenance and Specifications How fail-safe cooling works If the engine begins to overheat: • The engine coolant temperature gauge will move to the red (hot) area. • The “Multi-function warning light: automatic transaxle/cooling system” will illuminate (2.0L Zetec engine only). •…
  • Page 182
    Maintenance and Specifications 5. Restart the engine and take your vehicle to a service facility. Driving the vehicle without repairing the engine problem increases the chance of engine damage. Take your vehicle to a service facility as soon as possible. WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS Important safety precautions Do not overfill the fuel tank.
  • Page 183
    Maintenance and Specifications • Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury. •…
  • Page 184
    The customer warranty may be void for any damage to the fuel tank or fuel system if the correct genuine Ford or Motorcraft fuel filler cap is not used. The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap.
  • Page 185
    Gasolines that meet the World-wide Fuel Charter should be used when available. Ask your fuel supplier about gasolines that meet the World-wide Fuel Charter. Cleaner air Ford endorses the use of reformulated “cleaner-burning” gasolines to improve air quality. 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 186
    Maintenance and Specifications Running out of fuel Avoid running out of fuel because this situation may have an adverse affect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from OFF to ON several times after refueling, to allow the fuel system to pump the fuel from the tank to the engine.
  • Page 187
    Maintenance and Specifications vehicle after the fuel gauge indicates empty, you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank. For consistent results when filling the fuel tank: •…
  • Page 188
    Maintenance and Specifications Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually give the best fuel economy. • Idling for long periods of time (greater than one minute) may waste fuel.
  • Page 189
    The scheduled maintenance items listed in the Scheduled Maintenance Guide are essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft or Ford-authorized parts are used for maintenance replacements or for service of components affecting 2004 Focus (foc)
  • Page 190
    Maintenance and Specifications emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability. Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire.
  • Page 191
    Maintenance and Specifications These temporary malfunctions can be corrected by filling the fuel tank with good quality fuel and/or properly tightening the fuel cap. After three driving cycles without these or any other temporary malfunctions present, the Check engine/Service engine soon light should turn off. (A driving cycle consists of a cold engine startup followed by mixed city/highway driving.) No additional vehicle service is required.
  • Page 192
    Maintenance and Specifications CHECKING AND ADDING POWER STEERING FLUID Check the fluid. Refer to the Scheduled Maintenance Guide for service maintenance schedules. 1. Start the engine and let it run until it reaches normal operating schedules. 2. Turn the steering wheel left and right several times.
  • Page 193
    Maintenance and Specifications CLUTCH FLUID (IF EQUIPPED) The clutch master cylinder and brake master cylinder are part of the same system; both are refillable through the brake master cylinder with brake fluid. For more information on brake fluid maintenance, refer to Brake fluid in this chapter.
  • Page 194
    Maintenance and Specifications 5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If necessary, refer to Identifying components in the engine compartment in this chapter for the location of the dipstick. 6. Install the dipstick making sure it is fully seated in the filler tube. 7.
  • Page 195
    5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. Refer to Lubricant specifications in this chapter. 2004 Focus (foc) Owners Guide (post-2002-fmt)
  • Page 196
    10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford to give you the following information about tire grades exactly as the government has written it. Treadwear…
  • Page 197
    Maintenance and Specifications Temperature A B C The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 198
    Maintenance and Specifications • Bead area of the tire: Area of the tire next to the rim. • Sidewall of the tire: Area between the bead area and the tread. • Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle.
  • Page 199
    Maintenance and Specifications 6. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in your owner’s guide. If not, contact a local tire dealer. Note: You may not find this information on all tires because it is not required by federal law.
  • Page 200
    Maintenance and Specifications 9. M+S or M/S: Mud and Snow. or AT: All Terrain. or AS: All Season. 10. Tire Ply Composition and Material Used: Indicates the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall.
  • Page 201
    Maintenance and Specifications Additional information contained on the tire sidewall for “LT” type tires “LT” type tires have some additional information than those of “P” type tires; these differences are described below: 1. LT: Indicates a tire, designated by the Tire and Rim Association (T&RA), that is intended for service on light trucks.
  • Page 202
    You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial type tire pressure gauge rather than a stick type tire pressure gauge.
  • Page 203
    Maintenance and Specifications Use the recommended cold inflation pressure for optimum tire performance and wear. Under-inflation or over-inflation may cause uneven treadwear patterns. Under-inflation is the most common cause of tire failures and may result in severe tire cracking, tread separation or blowout , with unexpected loss of vehicle control and increased risk of injury.
  • Page 204
    Wheel misalignment in the front or the rear can cause uneven and rapid treadwear of your tires and should be corrected by a qualified technician at a Ford or Lincoln/Mercury dealer. Front wheel drive (FWD) vehicles, and those with an independent rear suspension require alignment of all four wheels.
  • Page 205
    Maintenance and Specifications • Front Wheel Drive (FWD) vehicles (front tires at top of diagram) • Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD) vehicles (front tires at top of diagram) Sometimes irregular tire wear can be corrected by rotating the tires. 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 206
    Maintenance and Specifications Note: If your tires show uneven wear ask a qualified technician at a Ford or Lincoln/Mercury dealership to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: Your vehicle may be equipped with a dissimilar spare tire/wheel. A dissimilar spare tire/wheel is defined as a spare tire and/or wheel that is different in brand, size or appearance from the road tires and wheels.
  • Page 207
    Only use replacement tires and wheels that are the same size and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
  • Page 208
    Maintenance and Specifications Never spin the tires in excess of the 55 km/h (35 mph) point indicated on the speedometer. Highway hazards No matter how carefully you drive there’s always the possibility that you may eventually have a flat tire on the highway. Drive slowly to the closest safe area out of traffic.
  • Page 209
    Refer to the Scheduled Maintenance Guide for the appropriate intervals for changing the PCV valve. Replace the PCV valve with one that meets Ford material and design specifications for your vehicle, such as a Motorcraft or equivalent replacement part. The customer warranty may be void for any damage to the emissions system if such a PCV valve is not used.
  • Page 210
    Maintenance and Specifications REFILL CAPACITIES Fluid Ford Part Application Capacity Name Brake fluid and Motorcraft Fill to line on clutch fluid High reservoir Performance DOT 3 Motor Vehicle Brake Fluid Engine coolant Motorcraft 2.0L SPI engine 5.75L (6.1 quarts) Premium Gold 2.0L Zetec E…
  • Page 211
    Maintenance and Specifications Fluid Ford Part Application Capacity Name Transaxle fluid Motorcraft Full 5-speed manual 2.0L (2.1 quarts) Synthetic Manual Transmission Fluid Motorcraft Automatic 6.6L (6.9 quarts) MERCON V Windshield Motorcraft Sedan 2.5L (2.6 quarts) washer fluid Premium Windshield Coupe and Wagon 4.0L (4.2 quarts)
  • Page 212
    Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C153–H and the API Certification mark. LUBRICANT SPECIFICATIONS…
  • Page 213
    Maintenance and Specifications Ford Part Ford Part Ford Item Name or Number Specification Equivalent Engine oil Motorcraft SAE XO-5W20-QSP WSS-M2C153-H 5W-20 Premium (US) and API Synthetic Blend CXO-5W20–LSP12 Certification Motor Oil (US) (Canada) Mark Motorcraft SAE 5W-20 Super Premium Motor…
  • Page 214
    Maintenance and Specifications VEHICLE DIMENSIONS Vehicle Sedan mm (in) Coupe mm (in) Wagon mm (in) dimensions (1) Overall length 4440 (174.8 4269 (168.1) 4523 (178.1) (2) Overall width 1988 (78.3) 1988 (78.3) 1988 (78.3) (3) Overall height 1474 (58.0) 1474 (58.0) 1493 (58.8) (4) Wheelbase 2615 (103)
  • Page 215
    Maintenance and Specifications • Coupe 2004 Focus (foc) Owners Guide (post-2002-fmt) USA English (fus)
  • Page 216
    Maintenance and Specifications • Wagon IDENTIFYING YOUR VEHICLE Certification label The National Highway Traffic Safety Administration Regulations require that a Certification label be affixed to a vehicle and prescribe where the Certification label may be located. The Certification label is located on the front door latch pillar on the driver’s side.
  • Page 217
    Maintenance and Specifications Vehicle identification number (VIN) The vehicle identification number is attached to a metal tag and is located on the driver side XXXXXXXXXXXXXXXXX instrument panel. (Please note that in the graphic XXXX is representative of your vehicle identification number.) 1.
  • Page 218
    Maintenance and Specifications Transmission/Transaxle code designations You can find a transmission/transaxle code on the vehicle certification label which is located on the door pillar. The following table tells you which transmission or transaxle each code represents. Truck application: Code Transmission Description Manual transmission Manual 5–speed (AKK)) Manual 5–speed overdrive (Close ratio)
  • Page 219
    Maintenance and Specifications Code Transmission Description Electric One speed electric Automatic 5–speed overdrive (5R44E) Automatic 5–speed overdrive (5R55S) Passenger car application: Code Transmission/Transaxle Description Front wheel drive manual transaxle 5–speed overdrive (MTX75) 5–speed overdrive (M5) Front wheel drive automatic transaxle 4–speed overdrive (4F27E) 4–speed overdrive (4FE) 3–speed (Mazda)
  • Page 220
    In addition, each accessory is made from high quality materials and meets or exceeds Ford’s rigorous engineering and safety specifications. Ford Motor Company will repair or…
  • Page 221
    Accessories Floor mats Interior trim kits Leather wrapped steering wheels Scuff plates Speed control Lifestyle Bike racks Cargo organization and management Engine block heaters and blankets Peace of mind Airbag anti-theft locks First aid and safety kits Full vehicle covers Locking gas cap Navigation systems Remote start…
  • Page 222
    Index Index replacement, specifications …209 servicing ……..174 Air bag supplemental restraint BeltMinder ……..85 system ……..90, 94 Brakes ……..112 and child safety seats ….92 anti-lock ……..112 description ……90, 94 anti-lock brake system (ABS) disposal ……..96 warning light ……113 driver air bag ……92, 95 fluid, checking and adding ..192 indicator light ……94 fluid, refill capacities ….210…
  • Page 223
    Emergencies, roadside specifications ….212–213 jump-starting ……141 Cruise control (see Speed control) ….54 Emission control system ..189 Customer Assistance ….127 Engine ……..213–214 Ford accessories for your cleaning ……..160 vehicle ……..163 coolant ……..176 Ford Extended Service idle speed control ….174 Plan ……….151 lubrication specifications ….212–213…
  • Page 224
    Index Fuel ……….182 Hood ……….166 calculating fuel economy ..186 cap ………..184 capacity ……..210 choosing the right fuel …184 Ignition …….108, 213–214 comparisons with EPA fuel Infant seats economy estimates ….189 (see Safety seats) …..100 detergent in fuel …..185 Inspection/maintenance (I/M) filling your vehicle with testing ……..191 fuel ……182, 184, 186…
  • Page 225
    Index Lights, warning and indicator ..10 Power Windows ……53 anti-lock brakes (ABS) ..113 Load limits ………121 Locks Rear window defroster ….37 autolock ……..62 Relays ……..129 childproof ……..63 Remote entry system ….65 Lubricant specifications …212–213 locking/unlocking doors …62 opening the trunk …..66 Roadside assistance ….127 Manual transaxle lubricant specifications ..213…
  • Page 226
    Index Starting your brake-shift interlock (BSI) ..115 vehicle ……108–109, 111 fluid, checking and adding jump starting ……141 (automatic) ……193 Steering wheel fluid, checking and adding tilting ………51 (manual) ………195 Sunroof (moonroof) ….57 fluid, refill capacities ….210 lubricant specifications ..212 manual operation ….119 Trunk ………..64 Temperature control remote release ……66…

Источник

Сервис мануал разработан для станций технического обслуживания в удобном формате, который позволяет специалистам осуществлять ремонтные работы и обслуживание автомобилей Форд Фокус 1 с помощью специального оборудования. Инструкция по эксплуатации содержит все сведения, необходимые автомеханику для выполнения ремонтных работ, перечень оригинальных запчастей и комплектующих с идентификационными кодами. Руководство в электронном виде разбито на разделы и группы, содержащие информацию о порядке проведения ремонтных работ по восстановлению силовых узлов и агрегатов (двигатель, трансмиссия, сцепление), подвески, рулевого и электрооборудования автомобиля Ford Focus 1998-2004 годов выпуска.

Источник

Специальный инструмент Универсальный ключ для удерживания фланцев 205-072 (15030А) Инструмент для установки верхней мертвой

Специальный инструмент Приспособление для подъема двигателя 303-122 (21068А) Съемник полуоси 308-237 (16-087) Приспособление для

Специальный инструмент Съемник полуоси переднего ведущего моста 308-192 (16-057) Приспособление для выверки нейтрального положения

Специальный инструмент Приспособление для сжатия пружин клапанов 303-361 (21155) Переходник для 21-155 303-361-02 (2115502)

Специальный инструмент Приспособление для сжатия пружин при регулировке клапанных зазоров 303-563 (21-218) Пассатижи для

Специальный инструмент Приспособление для подъема двигателя 303-122 (21068А) Общее оборудование: Кран ремзоны Подкатной домкрат

Специальный инструмент Приспособление для подъема двигателя 303-122 (21068А) Съемник полуоси 308-237 (16-087) Приспособление для

Специальный инструмент Приспособление для сжатия пружин клапанов 303-361 (21-155) Переходник для 21-155 303-361-02 (21-155-02)

Специальный инструмент Приспособление для сжатия пружин клапанов 303-361 (21-155) Переходник для 21-155 303-361-02 (21-155-02)

Специальный инструмент Приспособление для подъема двигателя 303-122 (21068А) Приспособление для снятия и установки зажимов

Источник

Понравилась статья? Поделить с друзьями:
  • Starline сигнализация с автозапуском инструкция настройки инструкция на русском языке
  • Книга руководство по эксплуатации форд транзит
  • Чандрапрабха вати инструкция по применению на русском
  • Руководство по сакред
  • Инструкция видеорегистратора neoline g tech x74