Мануал хонда африка твин 1100

1. Manuals
2. Brands
3. Honda Manuals
4. Motorcycle
5. Africa Twin CRF1100A 2022
6. Owner’s manual

• Page 1
  Owner’s Manual 2022 2022 CRF1100A/D/A4/D4…
• Page 2
  This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without written permission.
• Page 3
  Congratulations on your purchase of a new When service is required, remember that your Honda vehicle. Your selection of a Honda Honda dealer knows your vehicle best. If you makes you part of a worldwide family of have the required mechanical “know-how”…
• Page 4
  A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY HURT important responsibility. if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety…

• Page 5: Table Of Contents

  Contents Vehicle Safety P. 2 Operation Guide P. 18 Maintenance P. 244 Troubleshooting P. 307 Information P. 338 Specifications P. 373…

• Page 6: Vehicle Safety

  Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ………. P. 3 Safety Labels……….P. 8 Safety Precautions ……..P. 10 Riding Precautions……..P. 11 Accessories & Modifications…… P. 15 Off-Road Safety ……….

• Page 7: Safety Guidelines

  Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual.

• Page 8
  Safety Guidelines We recommend that all riders take a certified Ride Defensively course approved by the Motorcycle Safety Always pay attention to other vehicles around Foundation (MSF) or a state approved training you, and do not assume that other drivers see course.
• Page 9
  OFF position, and evaluate the condition of your vehicle. Inspect for fluid Keep Your Honda in Safe Condition leaks, check the tightness of critical nuts and It’s important to keep your vehicle properly bolts, and check the handlebar, control levers, maintained and in safe riding condition.
• Page 10
  Safety Guidelines Lithium-Ion (Li-Ion) Battery Emergency Shut-down Procedure for Vehicles Equipped with Dual Clutch If you smell an unusual odor coming from the Transmission lithium-ion (li-ion) battery, park your vehicle in a safe place outside and away from flammable CRF1100D/D4 objects, then turn the ignition switch to the OFF Unlike standard motorcycles, or its manual position.
• Page 11
  Safety Guidelines Carbon Monoxide Hazard WARNING Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle while colorless, odorless gas. Breathing carbon in an enclosed or even partially enclosed monoxide can cause loss of consciousness and area can cause a rapid build-up of toxic may lead to death.

• Page 12: Safety Labels

  Safety Labels Safety Labels serious injury. Read these labels carefully and don’t remove them. Safety and information labels on your vehicle If a label comes off or becomes hard to read, provide important safety information and may contact your dealer for a replacement. warn you of potential hazards that could cause…

• Page 13
  Safety Labels…

• Page 14: Safety Precautions

  Safety Precautions Safety Precautions Must fit comfortably but securely, with the chin ● strap fastened Ride cautiously and keep your hands on the Face shield with unobstructed field of vision or ● ● handlebar and feet on the footpegs. other approved eye protection Instruct your passenger to keep their hands on ●…

• Page 15: Riding Precautions

  Riding Precautions Riding Precautions Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Break-in Period During the first 300 miles (500 km) of running, Jacket and Pants follow these guidelines to ensure your vehicle’s Protective, highly visible, long-sleeved jacket and future reliability and performance.

• Page 16
  Riding Precautions Exercise caution on low traction surfaces. ABS does not function at speeds below 6 mph ● ● The tires slip more easily on such surfaces (10 km/h). and braking distances are longer. The brake lever and pedal may recoil slightly ●…
• Page 17
  Riding Precautions 4. Turn the handlebar fully to the left. Parking Turning the handlebar to the right reduces Park on a firm, level surface. ● stability and may cause the vehicle to fall. If you must park on a slight incline or loose ●…
• Page 18
  Torque Control may not compensate for rough Honda Selectable Torque Control road conditions or rapid throttle operation. When the Honda Selectable Torque Control Always consider road and weather conditions, as detects rear wheel spin during acceleration, the well as your skills and condition, when applying system will limit the amount of torque applied to throttle.

• Page 19: Accessories & Modifications

  We strongly advise that you do not add any accessories that were not specifically designed or seriously hurt or killed. approved for your vehicle by Honda or make modifications to your vehicle from its original Follow all instructions in this owner’s design.

• Page 20: Off-Road Safety

  Off-Road Safety Off-Road Safety Never ride beyond your ability and experience ● or faster than conditions warrant. Learn to ride in an uncongested off-road area If you are not familiar with the terrain, ride ● free of obstacles before venturing onto cautiously.

• Page 21: Loading

  Loading Loading Also follow these guidelines when you ride off- road on rough terrain: Carrying extra weight affects your vehicle’s Do not carry a passenger. ● ● handling, braking and stability. Keep cargo small and light weight. ● Always ride at a safe speed for the load you Make sure it cannot easily be caught on brush are carrying.

• Page 22: Operation Guide

  Parts Location Fuse puller, Hex wrench, Standard/Phillips screwdriver, Screwdriver handle (P242) Document bag (P241) Throttle grip (P293) Battery box cover (P268) Rear suspension compression damping adjuster CRF1100A/D (P303) Front suspension compression damping adjusters CRF1100A/D (P297)

• Page 23
  Rear brake fluid reservoir (P281) Front brake fluid reservoir (P281) Main fuse & ABS main fuse (P335) FI fuse & Main 2 fuse CRF1100A/A4 (P336) FI fuse & Main 2 & DCT main fuse CRF1100D/D4 (P337) Rear brake pedal Coolant reserve tank (P279) Spark arresters (P275)
• Page 24
  Parts Location (Continued) Clutch lever CRF1100A/A4 (P290) Parking brake lever CRF1100D/D4 (P283) Windscreen lock lever CRF1100A4/D4 (P305) USB socket (P238) Accessory socket CRF1100A4/D4 (P237) Rear suspension spring preload adjuster CRF1100A/D (P299) Rear suspension rebound damping adjuster CRF1100A/D (P302) Side stand (P285)
• Page 25
  Front suspension spring preload/ rebound damping adjusters CRF1100A/D (P295) (P296) Fuel fill cap (P236) Front brake lever (P294) Front seat (P270) Fuse box & ABS FSR fuse (P334) Rear seat (P273) Battery (P267) Tool kit/Tool box (P242) (P274) Engine oil fill cap (P277) Shift lever CRF1100A/A4…
• Page 26
  Instruments Odometer [TOTAL] Total distance ridden. When “ ” is displayed, have your Speedometer dealer check for problems. AT indicator CRF1100D/D4 Comes on when in AT MODE. (P226) Display Check When the ignition switch is turned to the ON position, all the mode and digital segments will show.
• Page 27
  Gear position indicator CRF1100A/A4 The gear position is shown in the gear position indicator. “-” appears when the transmission is not shifted properly. CRF1100D/D4 The gear position is shown in the gear position indicator when the MT MODE is selected. The indicator may flash if: The front wheel leaves the ground.
• Page 28
  Instruments (Continued) Multi-information display When the ignition switch is turned ON, the Your vehicle is equipped with a multi- Notice message appears on the screen for a information display that presents various few seconds. functions and settings. Read the Notice message, and then press the The multi-information display is a touch switch or touch [OK] on the screen.
• Page 29
  Home Screen Riding Information From this screen, you can go to various You can go back to the riding information. functions and setup options. Riding information has 3 displays, Gold image To return to the Home screen: display, Silver image display and Bronze (P36) image display.
• Page 30
  Instruments (Continued) Riding Information Air temperature gauge Gold image display (P65) Clock (12-hour or 24-hour display) To set the clock: (P88) Riding mode display (P139) Side stand indicator (P65) Sub-information indicator (P39) Cruise Control Set Speed The speed set for cruise control is displayed.
• Page 31
  Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) Fuel gauge Remaining fuel when only E (1st) segment starts flashing: Approximately 0.95 US gal (3.6 L) CRF1100A/D Approximately 1.03 US gal (3.9 L) CRF1100A4/D4…
• Page 32
  Instruments (Continued) Torque Control level [T] indicator (P131) When the indicator flashes, have your dealer check for problems. [EB] [Engine Brake] level indicator (P139) When the indicator flashes, have your dealer check for problems. [P] [Power] level indicator (P139) When the indicator flashes, have your dealer check for problems.
• Page 33
  Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P130) If the handle grip heater status icon flashes: (P315) Gear position indicator CRF1100A/A4 The gear position is shown in the gear position indicator. “-”…
• Page 34
  Instruments (Continued) Silver image display Clock (12-hour or 24-hour display) To set the clock: (P88) Side stand indicator (P65) Riding mode display (P139) NOTICE You should refuel when the reading approaches the E (1st) segment. Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
• Page 35
  Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P130) If the handle grip heater status icon flashes: (P315) Air temperature gauge (P65) Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life.
• Page 36
  Instruments (Continued) Torque Control level [T] indicator (P131) When the indicator flashes, have your dealer check for problems. [EB] [Engine Brake] level indicator (P139) When the indicator flashes, have your dealer check for problems. [P] [Power] level indicator (P139) When the indicator flashes, have your dealer check for problems.
• Page 37
  Bronze image display Clock (12-hour or 24-hour display) To set the clock: (P88) Riding mode display (P139) Side stand indicator (P65) Cruise Control Set Speed The speed set for cruise control is displayed. Cruise Control: (P230) Continued…
• Page 38
  Instruments (Continued) Handle grip heater status icon CRF1100A4/D4 The handle grip heater status icon will appear while the handle grip heater is on. (P130) If the handle grip heater status icon flashes: (P315) [P] [Power] level indicator (P139) When the indicator flashes, have your dealer check for problems. Torque Control level [T] indicator (P131) When the indicator flashes, have your dealer check for problems.
• Page 39
  Air temperature gauge (P65) Tachometer NOTICE Do not operate the engine in the Tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) Fuel gauge Remaining fuel when only E (1st) segment starts flashing: Approximately 0.95 US gal (3.6 L) CRF1100A/D Approximately 1.03 US gal (3.9 L)
• Page 40
  Instruments (Continued) Basic Operations To Return to the Home Screen You can operate and set the various functions of Pull backward and hold the page switch your vehicle using the switches on the left on the left handlebar or touch the clock area handlebar and function sel switch on the of the multi-information display with your…
• Page 41
  To Select a Desired Setting Menu To Set Your Selection To operate with the left handlebar: To operate with the left handlebar: Press to select the available Press the switch on the left handlebar to choices. set your selection. To operate with the left handlebar: switch Push to select the available choices.
• Page 42
  Instruments (Continued) To Exit the Setting Menu To operate with the touch screen: To return to the riding information: Touch the to be selected on the touch Pull backward the page switch on the left screen. handlebar. Also, the setting mode ends when your To return to the Home screen: vehicle speed reaches approximately 4 mph (6 Pull backward and hold the…
• Page 43
  Page 1: Page 1 shows the following items: Tripmeter A [TRIP A] and three items related to Tripmeter A [TRIP A] and Tripmeter B [TRIP B]. (P84) ● Tripmeter A average fuel mileage [AVG. CONS.] display (P44) ● Tripmeter A average speed [AVG. SPD.] display (P50) ●…
• Page 44
  Instruments (Continued) Page 2: Page 2 shows the following items: Tripmeter B [TRIP B] and three items related to Tripmeter B [TRIP B]. (P84) ● Tripmeter B average fuel mileage [AVG. CONS.] display (P49) ● Tripmeter B average speed [AVG. SPD.] display (P50) ●…
• Page 45
  Page 3: Page 3 shows four items selected from the following items. (P84) ● Current fuel mileage [INST. CONS.] display (P53) ● Available driving distance [RANGE] display (P54) ● Battery voltage [VOLTAGE] display (P55) ● Date [DATE] display (P55) ● Average fuel mileage [AVG. CONS.] display (P56) ●…
• Page 46
  Page 4: Page 4 shows the setting values of the following items. ● ABS function on the rear wheel [ABS RR] display (P60) ● Honda Selectable Torque Control level [HSTC] display (P61) ● Wheelie Control level [W] display (P62) ●…
• Page 47
  To Switch the Page of Display Tripmeter A [TRIP A] Distance ridden since the tripmeter A was Select the gold image display. (P79) reset. Push the of the sel left/ right switch until the desired page is displayed. You can also perform the above settings by using the touch screen.
• Page 48
  Instruments (Continued) Tripmeter A Average Fuel Mileage [AVG. CONS.] Displays the average fuel mileage since the tripmeter A was reset. The average fuel mileage will be calculated based on the value displayed on the selected tripmeter A. Display range: 0.0 to 299.9 mpg (km/l, l/100 km or mile/L) ●…
• Page 49
  Tripmeter A Average Speed [AVG. SPD.] Displays the average speed since the tripmeter A was reset. The average speed will be calculated based on the value displayed on the selected tripmeter A. ● When the tripmeter A average speed is reset: “299.0”…
• Page 50
  Instruments (Continued) Tripmeter A Fuel Consumption [CONS.] To reset the tripmeter A fuel Displays the tripmeter A fuel consumption consumption [CONS.]: (P67) since the tripmeter A was reset. Display range: 0.0 to 300.0 gal (L) ● Above 300.0 gal (L): “300.0” is displayed. ●…
• Page 51
  Tripmeter A Elapsed [ELAPSED] When “00:00” flashes, have your dealer check Displays the tripmeter A elapsed since the for problems. tripmeter A was reset. Display range: 00:00 to 99:59 (hours:minutes) To reset the tripmeter A elapsed ● The display locks at “99:59” when the read- [ELAPSED]: (P67) out exceeds 99:59.
• Page 52
  Instruments (Continued) Tripmeter B [TRIP B] When “—.-” flashes, have your dealer check Distance ridden since the tripmeter B was for problems. reset. To reset the tripmeter B [TRIP B]: (P68)
• Page 53
  Tripmeter B Average Fuel Mileage [AVG. CONS.] Displays the average fuel mileage since the tripmeter B was reset. The average fuel mileage will be calculated based on the value displayed on the selected tripmeter B. Display range: 0.0 to 299.9 mpg (km/l, l/100 km or mile/L) ●…
• Page 54
  Instruments (Continued) Tripmeter B Average Speed [AVG. SPD.] Displays the average speed since the tripmeter B was reset. The average speed will be calculated based on the value displayed on the selected tripmeter B. ● When the tripmeter A average speed is reset: “299.0”…
• Page 55
  Tripmeter B Fuel Consumption [CONS.] To reset the tripmeter B fuel Displays the tripmeter B fuel consumption consumption [CONS.]: (P68) since the tripmeter B was reset. Display range: 0.0 to 300.0 gal (L) ● Above 300.0 gal (L): “300.0” is displayed. ●…
• Page 56
  Instruments (Continued) Tripmeter B Elapsed [ELAPSED] When “00:00” flashes, have your dealer check Displays the tripmeter B elapsed since the for problems. tripmeter B was reset. Display range: 00:00 to 99:59 (hours:minutes) To reset the tripmeter B elapsed ● The display locks at “99:59” when the read- [ELAPSED]: (P68) out exceeds 99:59.
• Page 57
  Current Fuel Mileage [INST. CONS.] Displays the current instant fuel mileage Display range: 0.0 to 299.9 mpg (km/l, l/100 km or mile/L) ● When your speed is less than 1 mph (3 km/ h): “—.-” is displayed. ● Above 299.9 mpg (km/l or mile/L):“299.9” is displayed.
• Page 58
  Instruments (Continued) Available Driving Distance [RANGE] Displays the estimated distance you can travel on the remaining fuel. Display range: 999 to 0 mile (999 to 0 km) ● Above 999 mile (km): “999” is displayed. ● Initial display: “0” is displayed. ●…
• Page 59
  Battery Voltage [VOLTAGE] Date [DATE] Displays the current battery voltage. Displays today’s date. Display range: 7.5 to 18.5 V To set the current date: (P88) When “—.-” flashes, have your dealer check for problems. Continued…
• Page 60
  Instruments (Continued) Average Fuel Mileage [AVG. CONS.] Displays the average fuel mileage since the average fuel mileage was reset. Display range: 0.0 to 299.9 mpg (km/l, l/100 km or mile/L) ● Initial display: “—.-” is displayed. ● More than 299.9 mpg (km/l or mile/L): “299.9”…
• Page 61
  Fuel Consumption [CONS.] Elapsed Time [ELAPSED] Displays the fuel consumption. Displays operating time since the engine was started. Display range: 0.0 to 300.0 gal or 0.0 to 300.0 Display range: 00:00 to 99:59 (hours:minutes) ● The display locks at “99:59” when the read- ●…
• Page 62
  Instruments (Continued) Subtraction Trip [-TRIP] To set the subtraction trip: (P77) Distance travelled is subtracted from a preset figure, since the subtraction trip was set up. Default: 000 Display range: 999 to -1,000 mile or 1,607 to — 1,609 km The display locks at “-1000”…
• Page 63
  Blank Display is blank. Continued…
• Page 64
  Instruments (Continued) ABS Function on the Rear Wheel [ABS Available settings: [ACTIVE]/[CANCEL] Default: [ACTIVE] Displays the selected status of the ABS function on the rear wheel [ABS RR]. To select the ABS function on the rear wheel [ABS RR]: (P120)
• Page 65
  Honda Selectable Torque Control Level Setting range: Level 1 to 7 or 0 (Off) [HSTC] Display the selected value of the Honda To select the Honda Selectable Torque Selectable Torque Control level [HSTC]. Control level [HSTC]: (P131) Continued…
• Page 66
  Instruments (Continued) Wheelie Control Level [W] Setting range: Level 1 to 3 or 0 (Off) Display the selected value of the wheelie control level [W]. To select the wheelie control level [W]: (P135)
• Page 67
  Rear Suspension Preload Mode Status icon Riding condition [PRELOAD] Rider only CRF1100A4/D4 (Minimum preload) Displays the selected status of the rear suspension preload mode [PRELOAD]. Rider and luggage Rider and passenger Rider, passenger and luggage (Maximum preload) Default: Rider only To select the rear suspension preload mode [PRELOAD]: (P300)
• Page 68
  Instruments (Continued) G Switch [G] Available settings: [ACTIVE]/[CANCEL] Default: CRF1100D/D4 Displays the selected status of the G switch ● [TOUR MODE]: [CANCEL] [G]. ● [URBAN MODE]: [CANCEL] ● [GRAVEL MODE]: [CANCEL] ● [OFF ROAD MODE]: [ACTIVE] ● [USER 1 MODE]: [CANCEL] ●…
• Page 69
  Side Stand Indicator Air temperature gauge The side stand indicator comes on when the Displays the ambient temperature. side stand is put down. It goes off when the side stand is raised. Air temperature gauge Side stand indicator Continued…
• Page 70
  Instruments (Continued) Display range: 14 ºF (-10 ºC) to 122 ºF (50 ºC) Cruise Control Set Speed ● Below 13ºF (-11ºC): “—” is displayed The speed set for cruise control is displayed. ● Above 122ºF (50ºC): 122ºF (50ºC) flashes Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
• Page 71
  To Reset the Tripmeter A [TRIP A], Tripmeter A Average Fuel Mileage [AVG. CONS.], Tripmeter A Average Speed [AVG. SPD.], Tripmeter A Fuel Consumption [CONS.] and Tripmeter A Elapsed [ELAPSED] To reset the tripmeter A [TRIP A], tripmeter A average fuel mileage [AVG. CONS.], tripmeter A average speed [AVG.
• Page 72
  Instruments (Continued) To Reset the Tripmeter B [TRIP B], Tripmeter B Average Fuel Mileage [AVG. CONS.], Tripmeter B Average Speed [AVG. SPD.], Tripmeter B Fuel Consumption [CONS.] and Tripmeter B Elapsed [ELAPSED] To reset the tripmeter B [TRIP B], tripmeter B average fuel mileage [AVG.
• Page 73
  To Reset the Average Fuel Mileage [AVG. CONS.] To reset the average fuel mileage [AVG. CONS.], press and hold the switch while page 3 is displayed or touch and hold the page 3 area. Continued…
• Page 74
  Instruments (Continued) Setting mode Riding information To Shift to the Menu of the Multi- Information Display Home screen Riding Information Pull backward and hold the page switch or touch the clock area of the multi-information display. Phone (P179) Select [Riding Information], and then press the switch or touch the Media…
• Page 75
  Press the switch. Press the back switch or touch the of the multi-information display. Press the sel up switch. Press the sel down switch. Function User Modes Settings (P75) -Trip Auto Cancel Turn Signal Continued…
• Page 76
  Instruments (Continued) Display Settings Display Mode (P79) Brightness Background Favorite Information Favorite Switch…
• Page 77
  General Settings Date and Time (P88) Units Volume Language Restore Default Settings Continued…
• Page 78
  Instruments (Continued) Service Settings Maintenance (P99) Initialize Bluetooth Service mode (P155) CRF1100A4/D4 Connected Equipment Services (P193) System Information Regulatory (P105)
• Page 79
  Function User Modes Following items can be changed sequentially. You can change the [Power], [Engine Brake], ● User Modes (this page) [Overall] , [Front] , [Rear] , [ABS], [Preload] ● -Trip values in [USER 1 MODE] and [USER 2 MODE]. (P77) ●…
• Page 80
  Instruments (Continued) Select [User Modes], and then press the switch. Select [User 1] or [User 2] using the up or sel down switch, and then press the switch. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 81
  -Trip Press and hold the sel up switch or sel down switch to advance the figure You can also adjust value of the subtraction fast. trip [-TRIP]. Select [-Trip], and then press the Return to the riding information, previous switch. screen or Home screen.
• Page 82
  Instruments (Continued) Auto Cancel Turn Signal Select [Auto Cancel Turn Signal], and then press the switch to [ON] (enable) or You can enable/disable turn signal automatic [OFF] (disable) the function. cancellation. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 83
  Display Display Mode Following items can be changed sequentially. You can select the riding information image. ● Display Mode (this page) ● Brightness (P81) ● Background (P82) ● Favorite Information (P84) ● Favorite Switch (P86) Continued…
• Page 84
  Instruments (Continued) Select [Display Mode], and then press the Available settings: Gold image/Silver switch. image/Bronze image Default: Press the sel up switch or sel down ● [TOUR MODE]: Gold image switch to select a setting menu. ● [URBAN MODE]: Silver image Push the of the sel left/…
• Page 85
  Brightness Select [Brightness], and then press the switch. You can select the backlight brightness. Select [Auto], and then press the The display can become dark when the switch to [ON] (auto) or [OFF] (manual) the display is very hot. If it does not restore the function.
• Page 86
  Instruments (Continued) If you select to [OFF] (manual) push the Background of the sel left/right switch to You can select the background. select your preferred level. Push and hold the of the Automatic Background Control: (P344) sel left/right switch to advance the figure fast.
• Page 87
  Select [Background], and then press the If you select to [OFF] (manual), press the switch. sel up switch or sel down switch to select the [White] or [Black]. Select [Auto], and then press the switch to [ON] (auto) or [OFF] (manual) the function.
• Page 88
  Instruments (Continued) Favorite Information ● Page 3 You can select the following: ● Current fuel mileage [INST. CONS.] ● Available driving distance [RANGE] ● Page 1 ● Battery voltage [VOLTAGE] ● Tripmeter A average fuel mileage [AVG. ● Date [DATE] CONS.] ●…
• Page 89
  Select [Favorite Information], and then press Press to select the available switch. choices, and then press the switch. Push the of the sel left/ right switch until the desired page is displayed. Press to select the available choices, and then press the switch.
• Page 90
  Instruments (Continued) Default: Favorite Switch ● Page 1 ● Tripmeter A average fuel mileage [AVG. CONS.] ● Tripmeter A average speed [AVG. SPD.] ● Tripmeter A current fuel mileage [CONS.] ● Page 2 ● Tripmeter B average fuel mileage [AVG. CONS.] ●…
• Page 91
  Select [Favorite Switch], and then press the Return to the riding information, previous switch. screen or Home screen. (P38) You can also perform the above settings by Press the sel up switch or sel down using the touch screen. switch to select your desired mode. Available settings: [HSTC]/ [Wheelie Control]/[Riding Mode]/ [G Switch]…
• Page 92
  Instruments (Continued) General Date and Time Following items can be changed sequentially. The multi-information display receives signals ● Date and Time (this page) from GPS satellites and updates the date and ● Units time automatically. (P91) ● Volume You can also adjust the date and time (P93) ●…
• Page 93
  To [ON] (auto) adjust time automatically When GPS cannot be located. Read the notice message, and then press the function: switch. Select [Date and Time], and then press the switch. Select [Adjust Time Automatically], and then press the switch to [ON] (auto) the function.
• Page 94
  Instruments (Continued) To adjust the clock manually: Press on the sel left/right switch to select a day, month, year, hour, Select [Date and Time], and then press the minute or time format. switch. ● To advance the day, month, year, hour Select [Adjust Time Automatically], and then or minute: Press the sel up switch…
• Page 95
  Units You can change the following units. ● [Speed]: [mph] or [km/h] ● [Temperature]: [ºF] or [ºC] ● [Fuel Consumption]: [mpg] or [mile/L] If the [km/h] for speed is selected, the fuel mileage shown by [l/100 km] or [km/l]. Return to the riding information, previous screen or Home screen.
• Page 96
  Instruments (Continued) Select [Units], and then press the Available settings: switch. ● [Speed]: [mph]/[km/h] ● [Temperature]: [ºF]/[ºC] Press the sel up switch or sel down ● [Fuel Consumption]: [mpg]/[mile/L]/[l/100 switch to select a setting menu. km]/[km/l] Push the of the sel left/ Default: right switch to select your desired unit.
• Page 97
  Volume To [Off] (disable), [Low] or [High] automatic Selects the volume setting to automatically volume function: increase volume from the headsets as the Select [Volume], and then press the speed of the vehicle increases. switch. Select [Auto Volume], and then press the switch.
• Page 98
  Instruments (Continued) To adjust the volume: Select [Volume], and then press the switch. Press the sel up switch or sel down switch to select a setting menu. Push the of the sel left/ right switch to select your preferred level. Push and hold the of the sel left/right switch to advance the…
• Page 99
  Return to the riding information, previous Language screen or Home screen. Changes the system language. (P38) You can also perform the above settings by using the touch screen. VOLUME level range: Other than Microphone: Level 0 to 30 Microphone: Level 0 to 14 Default: ●…
• Page 100
  Instruments (Continued) Restore Default Settings The set values can be returned to default settings. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by Select [Restore Default Settings], and then using the touch screen. press the switch.
• Page 101
  Select [No] (not restore) or [Yes] (restore) Select [No] (not restore) or [Yes] (restore) using the sel up or sel down switch. using the sel up or sel down switch on the confirmation screen. When [No] is selected Press the switch.
• Page 102
  Instruments (Continued) Return to the riding information, previous Page 1: screen or Home screen. — Tripmeter A average fuel mileage (P38) You can also perform the above settings by [AVG. CONS.] — Tripmeter A average speed [AVG. using the touch screen. SPD.] Default setting values: — Tripmeter A current fuel mileage…
• Page 103
  ● Favorite switch: [HSTC] Service ● Auto Volume: [OFF] Following items can be changed sequentially. ● Periodic Maintenance: ● Maintenance (P100) ● Distance: «——» ● DTC (P102) ● Date: «—-/—» ● Initialize (P103) ● Oil Change: ● Service mode CRF1100A4/D4 (P104) ●…
• Page 104
  Instruments (Continued) Maintenance Select [Maintenance], and then press the switch. You can check the next periodic inspection time and next engine oil change. Press the sel up switch or sel down You can change the setting of the next switch to select a setting menu, and then periodic inspection and next engine oil press the switch.
• Page 105
  ● To advance the distance, month or year: Press the sel up switch until the Setting range: desired value is displayed. ● Periodic Maintenance: To delay the distance, month or year: ● Distance: 100 to 4,000 mile or 100 to Press the sel down switch until the 6,400 km…
• Page 106
  Instruments (Continued) Select [DTC], and then press the switch. You can check for a current problem with the PGM-FI system. If your vehicle has problem, DTC index is displayed. Reduce speed and have your vehicle inspected by your dealer as soon as possible. Return to the riding information, previous screen or Home screen.
• Page 107
  Initialize Select [Initialize], and then press the switch. You can calibrate the sensitivity of the touch screen. Select [Touchscreen Calibration], and then press the switch. Continued…
• Page 108
  Instruments (Continued) Touch the center on each of the four crosses. Service Mode The screen flashes green when calibration CRF1100A4/D4 is complete. The cornering light can be turned on when If calibration fails, the screen flashes red. the vehicle is stopped for inspection. Try step again.
• Page 109
  Select [Cornering Light Service Mode], and Equipment then press the switch. This menu cannot be selected. The cornering light lights up. The service mode will automatically stop in System Information 5 minutes. Shows various information of the multi- information display. ●…
• Page 110
  Instruments (Continued) Pop-up information In the following cases, pop-up information is displayed at the bottom of the multi-information display. ● Maintenance information: When the inspection time of your vehicle is approaching. Maintenance information Indication Explanation Remedy When the periodic Have your vehicle inspection time of inspected by your your vehicle is…
• Page 111
  This page intentionally left blank.
• Page 112
  Indicators If one of these indicators does not come on when it should, have your dealer check for problems. High coolant temperature indicator Comes on briefly when the ignition switch is turned to the ON position. If it comes on while riding: (P309) Left turn signal…
• Page 113
  Torque Control indicator ● Comes on when the ignition switch is turned to the ON position. Goes off when your speed reaches approximately 3 mph (5 km/h) to indicate Torque Control is ready to work. ● Blinks when Torque Control is operating. If it comes on while riding: (P312) Torque Control OFF Indicator…
• Page 114
  Indicators (Continued) Neutral indicator Parking brake indicator Comes on when the CRF1100D/D4 transmission is in Neutral. Lights as a reminder that you have not released the parking brake lever. Low fuel indicator ● Comes on briefly when the ignition switch is turned to the ON position. ●…
• Page 115
  ABS (Anti-lock Brake System) indicator ● Comes on briefly when the ignition switch is turned to the ON position. ● Goes off when your speed reaches approximately 6 mph (10 km/h). If it comes on while riding: (P311) Rear ABS (Anti-lock Brake System) OFF Indicator ●…
• Page 116
  Indicators (Continued) Suspension indicator CRF1100A4/D4 ● Comes on when the suspension initialization is waiting. ● Stop your vehicle and wait for a few seconds until the indicator turns off. If indicator dose not turn off, contact your dealer. Low oil pressure indicator ●…
• Page 117
  This page intentionally left blank.
• Page 118
  Switches Left handlebar Right handlebar switch switch (P116) (P115) Turns electrical system on for starting/riding. Ignition switch Switches the electrical system on/off, locks the steering. Turns engine off. Key can be removed when in LOCK the OFF or LOCK position. Locks steering.
• Page 119
  Right handlebar switch Function sel switch Engine stop switch/ Press to display the pop-up information button START on the multi-information display. Should normally remain in (Run) position. In an emergency, switch to the (Stop) position to stop the engine. To start the engine. (P218) AT/MT switch CRF1100D/D4…
• Page 120
  Switches (Continued) Left handlebar switch Favorite switch Favorite switch can be assigned to the HSTC switch, wheelie control switch, riding mode switch or G switch CRF1100D/D4 (P86) Horn button Turn signal switch The turn signal will automatically stop Shift down switch (-) when you complete the turn.
• Page 121
  Function lever ● Push forward or pull backward to adjust the audio system volume. (P153) ● Push forward or pull backward to adjust the grip heater level. (P129) Voice control switch / Page switch ● Push forward to receive, reject or end a call. (P187) ●…
• Page 122
  Switches (Continued) switch Press to set your selection. (P37) Sel up switch Press the sel up switch to select the available choices. (P37) Sel left/right switch Press the sel left/right switch in the directions to select the available choices. (P37) Goes back switch Goes back to the beginning of the current or previous song or to move rapidly within a track.
• Page 123
  Steering Lock Locking Lock the steering when parking to help Turn the handlebar all the way to the left. prevent theft. Push the key down, and turn the ignition A U-shaped wheel lock or similar device is also switch to the LOCK position. recommended.
• Page 124
  ABS function on the rear wheel The ABS function on the rear wheel can be To turn off the ABS function on the rear optionally turned off for off-road riding. wheel You can turn off the rear wheel ABS function Stop the vehicle and close the throttle in [OFF ROAD MODE], [USER 1 MODE] or completely.
• Page 125
  Press the switch. Read the notice message. Select [ABS RR]. Select [Yes], and then press the switch. Press on the sel left/right switch to select [CANCEL] (off). Press the back switch. The rear ABS OFF indicator is on, when the ABS function on the rear wheel [ABS RR] is turned [CANCEL] (off).
• Page 126
  ABS function on the rear wheel (Continued) To turn on the ABS function on both Press the switch. wheels Select [ABS RR]. Stop the vehicle and close the throttle Press on the sel left/right switch completely. to select [ACTIVE] (on). The rear ABS OFF indicator flashes several Select the gold image display.
• Page 127
  Press the back switch. Available settings: [ACTIVE]/[CANCEL] You can also perform the above settings Default: [ACTIVE] by using the touch screen. When the gold image is selected: ABS function on ABS function on both wheels is rear wheel is [ACTIVE] (on). [CANCEL] (off).
• Page 128
  G switch G switch on or off CRF1100D/D4 The G switch can change the engine ● When using the favorite switch. characteristics of your vehicle to help improve Stop the vehicle and close the throttle traction and machine control for off-road riding completely.
• Page 129
  ● When using the multi-information display: Press on the sel left/right switch to select [CANCEL] (off). Stop the vehicle and close the throttle Press on the sel left/right completely. switch to select [ACTIVE] (on). Select the gold image display. (P79) Select page 4.
• Page 130
  G switch (Continued) Available settings: [ACTIVE]/[CANCEL] When the gold image is selected: Default: ● [TOUR MODE]: [CANCEL] ● [URBAN MODE]: [CANCEL] ● [GRAVEL MODE]: [CANCEL] ● [OFF ROAD MODE]: [ACTIVE] ● [USER 1 MODE]: [CANCEL] ● [USER 2 MODE]: [CANCEL] G switch [G] G switch [G] [CANCEL] (off)
• Page 131
  Parking Brake CRF1100D/D4 Slot Lock lever Parking Brake Lever Be sure the parking brake is applied while parking and warming up the engine. Make sure the parking brake lever is released before riding. To apply the parking brake Squeeze the parking brake lever ) fully then rotate the lock lever ) clockwise until…
• Page 132
  Handle Grip Heater Handle grip heater indicator: CRF1100A4/D4 This vehicle is equipped with a handle grip Comes on when the handle grip heater is on heater that warms up your hands during your and indicates the selected heat level. The ride.
• Page 133
  To operate handle grip heater Push forward or pull backward the function lever to select the handle grip heater Start the engine. (P218) level. Select the handle grip heater display of pop- The status icon will be appeared on the up information using the function sel display when the handle grip heater…
• Page 134
  Handle Grip Heater (Continued) To turn off handle grip heater Maintains the selected level when the ignition switch is turned to the OFF position. Select the handle grip heater display pop-up The heater level is not changed if the ignition information using the function sel switch.
• Page 135
  Honda Selectable Torque Control Torque Control level (engine power control) In the following cases, the Torque Control will be turned on and the specific Torque Control can be selected or turned on/off. level will automatically be set as below. Do not change the Torque Control level while ●…
• Page 136
  Honda Selectable Torque Control (Continued) Torque Control level setting ● When using the multi-information display: ● When using the favorite switch: Stop the vehicle. Stop the vehicle. Select the gold image display. (P79) Select the [HSTC] of the favorite Select page 4.
• Page 137
  Press the back switch. You can also perform the above settings by using the touch screen. Torque Control on and off Stop the vehicle. Select the gold image display. (P79) Select page 4. (P43) Press the switch. Select [HSTC]. Press and hold on the sel left/ right switch to set the [0] (off).
• Page 138
  Honda Selectable Torque Control (Continued) Level [7] Level [6] Level [5] Level [4] Level [1] Level [2] Level [3] Push on the sel left/right switch [0] (Off) Push on the sel left/right switch or press the favorite switch Push and hold…
• Page 139
  Wheelie Control Wheelie Control level [W] can be selected or In the following cases, the wheelie control [W] will be turned on and the specific wheelie turned on/off. control level [W] will automatically be set as Do not change the wheelie control level [W] below.
• Page 140
  Wheelie Control (Continued) Wheelie Control Level setting ● When using the multi-information display: ● When using the favorite switch: Stop the vehicle. Stop the vehicle. Select the gold image display. (P79) Select the [Wheelie Control] of the Select page 4. (P43) favorite switch.
• Page 141
  Press the back switch. You can also perform the above settings by using the touch screen. Wheelie Control on and off Stop the vehicle. Select the gold image display. (P79) Select page 4. (P43) Press the switch. Select [W]. Press and hold on the sel left/ right switch to set the [0] (off).
• Page 142
  Wheelie Control (Continued) Level [3] Level [2] Level [1] [0] (Off) Push on the sel left/right switch Push on the sel left/right switch or press the favorite switch Push and hold on the sel left/right switch Push and hold on the sel left/right switch…
• Page 143
  Riding mode You can change the riding mode. CRF1100A4/D4 The riding mode consists of the following [PRELOAD] [Preload]: Rear suspension parameters. preload ● (Rider): Rider only (Minimum preload) [P] Power: Engine output level ● (Rider+Cargo): Rider and luggage [EB] Engine brake: Engine brake level ●…
• Page 144
  Riding mode (Continued) Riding mode has 6 modes. Current riding mode Available riding modes: [TOUR MODE], [URBAN MODE], [GRAVEL MODE], [OFF ROAD MODE], [USER 1 MODE] and [USER 2 MODE] [TOUR MODE], [URBAN MODE], [GRAVEL MODE] and [OFF ROAD MODE] [TOUR MODE]: Enables smooth acceleration even when riding with a passenger or a full [P] [Power]…
• Page 145
  Initial setting [EB] Suspension damping [Engine [ABS] ABS [G] G Riding modes [Power] Brake] [Overall] [Front] [Rear] mode switch value value [TOUR MODE] Medium Medium ON ROAD CANCEL [URBAN MODE] Medium Medium ON ROAD CANCEL [GRAVEL MODE] Medium Medium OFF ROAD CANCEL [OFF ROAD MODE] Medium…
• Page 146
  Riding mode (Continued) [PRELOAD] [PRELOAD] [PRELOAD] [PRELOAD] [Preload] [Preload] Riding modes [Preload] [Preload] (Rider+ (Rider+ (Rider) (Rider+Cargo) Passenger+ Passenger) Cargo) [TOUR MODE] [URBAN MODE] [GRAVEL MODE] [OFF ROAD MODE] [USER 1 MODE] [USER 2 MODE] Notes: *1 : CRF1100A4/D4 *2 : Value can be changed.
• Page 147
  [P] Power value (Engine output level) [S] Overall: suspension damping [P] Power value has four setting levels. CRF1100A4/D4 Available setting range: 1 to 4 [S] Overall value has four setting levels. Level 1 has the maximum power. Available setting range: [H] Hard / [M] Level 4 has the minimum power.
• Page 148
  Riding mode (Continued) [Rear]: suspension damping [PRELOAD] [Preload] (Rider), (Rider+Cargo), (Rider+Passenger) and CRF1100A4/D4 [Rear] has three setting levels. (Rider+Passenger+Cargo): rear Available setting range: — / Medium / + suspension preload + has the maximum suspension damping. CRF1100A4/D4 — has the minimum suspension damping. [PRELOAD] [Preload] Preload has twenty four setting levels.
• Page 149
  Selecting the riding mode ● When using the favorite switch: When changing the riding mode, the rear Select the [Riding Mode] of the wheel ABS function [ABS RR] will automatically favorite switch. (P86) be set to [ACTIVE]. Press the favorite switch. ●…
• Page 150
  Riding mode (Continued) Setting the riding mode You can change the [P] [Power], [EB] [Engine Brake], [S] [Overall], [Front], [Rear], ABS mode [ABS] and [PRELOAD] [Preload] on the [USER 1 MODE] and [USER 2 MODE] of the riding mode. (P75) Press the sel up switch or press the…
• Page 151
  Audio System About Your Audio System ● Set the volume at a level that still allows This audio system can play audio files on horns and emergency vehicles to be heard. audio devices (mobile phone, digital ● Some audio devices, iPhone, Android phone ®…
• Page 152
  Bluetooth device. ® Wireless Technology ® Bluetooth The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license.
• Page 153
  Audio System Location iPhone/Android phone iPhone/Android phone/ Mobile phone/Bluetooth ® audio device, etc. USB connector USB connection (P199) connection ® GPS antenna Bluetooth (P157) connection ® (P162) Bluetooth Left handlebar ® Bluetooth switches connection Passenger Bluetooth ® Multi-information headset (P162) display Rider Bluetooth headset…
• Page 154
  Audio System (Continued) Basic Operations USB connection for Apple You can operate and set the various functions CarPlay/Android Auto of the audio system using the touch screen Audio system supported and/or switches on the left handlebar. profiles: However, you cannot operate some functions ●…
• Page 155
  Function lever: Push forward or pull switch backward the lever to adjust the volume. Sel up switch ● To increase the volume: Push forward the lever. Goes ● To decrease the volume: Pull backward the back switch lever. ● To increase the volume rapidly: Push forward [10] Back and hold the lever.
• Page 156
  Audio System (Continued) Goes back switch: Page switch: ● To go back to the beginning of the current or ● To return to the riding information or audio previous song: Press the switch. screen: Pull backward the switch. ● To move rapidly within a track: Press and hold ●…
• Page 157
  To Adjust the Volume When you push forward or pull backward the You can adjust the volume settings for the function lever, the volume control level headsets. appears on the pop-up information. The system has the following unique volume levels. Adjust the volume while in the individual modes.
• Page 158
  Audio System (Continued) To increase the volume: push forward the Auto Volume function lever. Selects the volume setting to automatically To increase the volume rapidly, push forward increase volume from the headsets as the and hold the function lever. speed of the vehicle increases. To decrease the volume: pull backward the To select the Auto Volume: (P93)
• Page 159
  Audio ® Bluetooth Setting ® Bluetooth You can connect with your Bluetooth audio device (mobile phone, digital audio player or ® equivalents) and Bluetooth headsets via Bluetooth ® ® Available devices are as follows: ● [Phone Pairing] (For Bluetooth audio device) ®…
• Page 160
  Audio System (Continued) Supported Bluetooth version/profiles ® version Bluetooth 2.1 + EDR ® Bluetooth HFP (Hand Free Profile) ver. 1.5 profiles (For ® Bluetooth A2DP (Advanced Audio Distribution Profile) ver. 1.2 iPhone, Android phone, mobile phone or AVRCP (Audio/Video Remote Control Profile) ver. 1.4 device) ®…
• Page 161
  Phone Pairing Enable the Bluetooth function on your ® device. You can establish a Bluetooth connection in ® For details, refer to the instruction manual two ways. of your device. ● [Discoverable]: Search from the device. ● [Phone Pairing]: Search from the system. Select [Bluetooth], and then press the switch.
• Page 162
  Select [Bluetooth], and then press the [Discoverable] switch to [ON] (enable) the function. Select [Discoverable], and then press the switch to [ON] (enable) the function. Tap “Honda Motorcycle #*****” on the setting menu of the target ® Bluetooth device. The part of ***** is different letter for each vehicle.
• Page 163
  The device name and Passkey appear on the When the pairing is complete, the name of screen. Select [Yes], and then press the the paired device are displayed. switch. Icon status: : Phone function connected : Music function connected Return to the riding information, previous screen or Home screen.
• Page 164
  Audio System (Continued) [Phone Pairing] Select [+Add a device], and then press the switch. Select [Phone Pairing], and then press the switch. The names of the detected device are displayed. If many Bluetooth devices are detected, ® the target device may be detected under the list, scroll down the list.
• Page 165
  Select a target device name, and then press When a request message appears on the switch. target device, tap “Pair.” When the pairing is complete, the name of the paired device are displayed. Icon status: : Phone function connected : Music function connected Select [Yes], and then press the switch.
• Page 166
  Audio System (Continued) You can also perform the above settings by Headset Pairing This function is disabled while the vehicle is in using the touch screen. motion. To disconnect the phone: Enable the Bluetooth function on your ® (P165) device. For details, refer to the instruction manual of your device.
• Page 167
  Select [Bluetooth], and then press the Select [+ Add a device], and then press the switch to [ON] (enable) the function. switch. Select [Headset Pairing], and then press the The names of the detected device are switch. displayed. If many Bluetooth devices are detected, ®…
• Page 168
  Audio System (Continued) Select a target device name, and then press When the pairing is complete, device name is switch. displayed. Rider When pairing rider headset Passenger When pairing passenger headset Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 169
  To Reconnect a Paired Device To Connect/Disconnect Available Automatically Functions Individually When the ignition switch is turned ON Depending on the connected device, this position, the system reconnects with function may not be able to establish a registered devices automatically. connection.
• Page 170
  Audio System (Continued) To connect functions: 2. Select the paired device, and then press switch. [Phone Pairing] 1. Select [Phone Pairing], and then press switch to enter the setting menu.
• Page 171
  3. Select [Connect a Phone] or [Connect [Headset Pairing] Music], and then press the switch 1. Select [Headset Pairing], and then press to [ON] (enable) the function. switch to enter the setting menu. Continued…
• Page 172
  Audio System (Continued) 2. Select the paired device, and then press 3. Select [Designate as a Rider] or [Connect switch. Headset], and then press the switch to [ON] (enable) the function. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 173
  To disconnect functions: 2. Select the paired device, and then press switch. [Phone Pairing] 1. Select [Phone Pairing], and then press switch to enter the setting menu. Continued…
• Page 174
  Audio System (Continued) 3. Select [Connect a Phone] or [Connect [Headset Pairing] Music], and then press the switch 1. Select [Headset Pairing], and then press to [OFF] (disable) the function. switch to enter the setting menu.
• Page 175
  2. Select the paired device, and then press 3. Select [Designate as a Rider] or [Connect switch. Headset], and then press the switch to [OFF] (disable) the function. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 176
  Audio System (Continued) To Delete Connected Device Select [Phone Pairing] or [Headset Pairing], and then press the switch to enter the Select [Bluetooth], and then press the setting menu. switch. Select the paired device, and then press the switch.
• Page 177
  Select [Delete Connected Device], and then The name of the device disappears from the press the switch. screen. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen. Continued…
• Page 178
  Audio System (Continued) Playing Audio Screen Information The audio system can play music stored on a The information displayed on the screen device connected via Bluetooth differs depending on the connected device ® and the type of file being played back. [3] Album title [5] Progress The system supports ID3 tag information.
• Page 179
  To Play a Track Select , and then press the switch. Connect the device you want to play from. setting: ® (P165) Bluetooth Select [Media], and then press the switch. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 180
  Audio System (Continued) To Pause a Track To Change a Track Select , and then press the switch. ● To skip to the next song: Press the You can also perform the above settings by skip switch. using the touch screen. ●…
• Page 181
  To Select the Play Mode Cycles through the play modes as follows: You can select repeat and random modes. Select , and then press the switch. The audio play mode status icon or color of (Black) No repeat mode: No the audio play mode status icon changes.
• Page 182
  Audio System (Continued) Select , and then press the switch. (Black) Normal play mode: Plays tracks in original order. (Blue) Random play mode: Plays tracks randomly. You can also perform the above settings by using the touch screen.
• Page 183
  Handsfree Calling ● CRF1100A/D Using Bluetooth Handsfree Calling While talking, you may be hard to hear due ® handsfree calling allows you to to wind noise during running or external ® Bluetooth make and receive phone calls using your noise. In that case, try to change the vehicle’s audio system, without handling your position of the microphone.
• Page 184
  Audio System (Continued) Preparation Making a Call You can make calls by inputting a phone Connect with the paired mobile phone. number or by using the phonebook, call (P157) The phonebook is updated after every history or speed dial entries. connection.
• Page 185
  To Make a Call Using the Call History Select [Call History]. [Call History] Select the phone number you want to call, You can make a call using the call history while and then press the switch. the vehicle is in motion. (blue): Dialed call Call history displays the last 30 dialed, received, or missed calls.
• Page 186
  Audio System (Continued) To Make a Call Using a Speed Dial Entry To end the call, push forward the voice control switch on the left handlebar. [Speed Dial] The same action can be done by selecting You can make a call using the speed dial while [End Call] on the screen.
• Page 187
  To Make a Call Using the Phonebook To end the call, push forward the voice control switch on the left handlebar. [Contacts] The same action can be done by selecting This function is disabled while the vehicle is in [End Call] on the screen. motion.
• Page 188
  Audio System (Continued) To Make a Call Using a Phone Number Select [CALL], and then press the switch to make a call. [Dial Number] To cancel the call, press the switch. This function is disabled while the vehicle is in When making a call 1 second after the motion.
• Page 189
  To end the call, push forward the voice To Store a Phone Number in the Speed control switch on the left handlebar. Dial List The same action can be done by selecting Speed dial numbers can be stored. [End Call] on the screen. Select [Speed Dial].
• Page 190
  Audio System (Continued) Select the phone number you want to store, To Delete a Stored Speed Dial Number and then press and hold the switch. Select [Settings]. The phone number will be stored in the Select the [Edit Speed Dial], and then press speed dial list.
• Page 191
  Select the phone number you want to delete, Receiving a Call and then press and hold the switch. When there is an incoming call, an audible notification sounds and the Incoming Call screen appears. Return to the riding information, previous screen or Home screen.
• Page 192
  Audio System (Continued) Ring Tone To Receive a Call If the connected mobile phone supports “in When a call comes in, push forward the band ring tone”, the ring tone stored on the voice control switch on the left handlebar to phone sounds automatically while receiving a receive the call.
• Page 193
  To Decline a Call To End a Call When a call comes in, push forward and hold While talking, push forward the voice voice control switch on the left control switch on the left handlebar to end the handlebar to reject a call. call.
• Page 194
  Audio System (Continued) Apple CarPlay ● In no event shall Honda be liable for any If you connect an Apple CarPlay-compatible damage or trouble that occurs in the use of iPhone to the system via USB, you can use the iPhone.
• Page 195
  ● Application and menu items displayed on the ● For details on countries and regions where screen may differ depending on the Apple CarPlay is available, as well as connected device and iOS version. information pertaining to function, refer to ●…
• Page 196
  Apple CarPlay functionality and services. Honda cannot and does not provide any warranty or guarantee of future Apple CarPlay performance or functionality. It is possible to use 3rd party apps if they are compatible with Apple CarPlay.
• Page 197
  To Setup Apple CarPlay Pair the headsets. (P162) Use of Apple CarPlay will result in the Connect your iPhone using a certified cable transmission of certain user and vehicle to the USB socket. (P199) information (such as vehicle location, speed, If the following screen is displayed, Apple and status) to your iPhone to enhance the CarPlay can not be used, but USB power…
• Page 198
  Audio System (Continued) When the disclaimer message appears on [Enable] when [Remember My Choice] the screen, select [Enable], and then press is [OFF]: Allows only once. (Prompt shows switch. again next time.) Set [Remember My Choice] to ON so that [Enable] when [Remember My Choice] you will not be asked the next time you is [ON]: Allows anytime.
• Page 199
  To Enable or Disable Apple CarPlay Select [Apple CarPlay], and then press the switch. Select [Connected Services], and then press switch. Select a target device name, and then press switch. Continued…
• Page 200
  Audio System (Continued) To enable Apple CarPlay: To disable Apple CarPlay: Select [Enable Apple CarPlay], and then press Select [Enable Apple CarPlay], and then press switch to [ON] (enable) the switch to [OFF] (disable) the function. function. Return to the riding information, previous Return to the riding information, previous screen or Home screen.
• Page 201
  To Select Ask On or Ask Off of the Apple Select [Apple CarPlay], and then press the CarPlay disclaimer Screen switch. Select [Connected Services], and then press switch. Select a target device name, and then press switch. Continued…
• Page 202
  Audio System (Continued) To ask on connection: To ask off connection: Select [Ask on Connection], and then press Select [Ask on Connection], and then press switch to [ON] (ask on) the switch to [OFF] (ask off) the function. function. Return to the riding information, previous Return to the riding information, previous screen or Home screen.
• Page 203
  To Connect Your iPhone To Disconnect Your iPhone ● Do not leave your device in the vehicle (under You can disconnect your iPhone at any time. the front seat or under the rear seat etc.). Make sure to follow the device’s instructions High heat will damage it.
• Page 204
  Audio System (Continued) Apple CarPlay Menu Apple CarPlay menu screen Home screen Messages Music Maps Phone Go to Apple CarPlay Go back to Home screen menu screen Go back to Apple CarPlay menu screen…
• Page 205
  Display Apple CarPlay map and use the navigation function just as you would on your iPhone. Messages Check and reply to text messages, or have messages read to you. Honda Go back to the Home screen. Go back to the Apple CarPlay menu screen.
• Page 206
  Audio System (Continued) Operating Apple CarPlay with Siri Say a voice command through the paired headset. To activate Siri, pairing with device such as a CRF1100A/D headset (for rider) must be paired. (P162) Siri may not be recognised correctly due to the effect of wind noise during running or To Activate Siri external noise.
• Page 207
  To Deactivate Siri Push forward the voice control switch on the left handlebar. You can also perform the above settings by using the touch screen. Siri is a trademark of Apple Inc. Please visit www.apple.com/ios/siri. Continued…
• Page 208
  Android phone display to ● In no event shall Honda be liable for any access the Phone, Google Maps™ damages or troubles that occur in the use (Navigation), Notification center, and voice of Android phone.
• Page 209
  Android Auto functionality and services. information pertaining to function, refer to the Android Auto homepage. Honda cannot and does not provide any ● Google, Android, Google Maps, Google warranty or guarantee of future Android Auto Play and Android Auto are trademarks of performance or functionality.
• Page 210
  Audio System (Continued) Use of User and Vehicle Information The use and handling of user and vehicle information transmitted to /from your phone by Android Auto is governed by the Google’s Privacy Policy.
• Page 211
  To Setup Android Auto Pair the headsets. (P162) When you connect an Android phone to the Connect your Android phone to the USB unit via the USB port, Android Auto is socket. (P238) automatically initiated. Only initialize Android Auto when you Use of Android Auto will result in the safely parked.
• Page 212
  Audio System (Continued) Enable the Android Auto setting (P213) Android Auto screen appears. To appear App launcher screen, select then press switch. You can also perform the above settings by using the touch screen. To display the prompt: (P215) [Enable] when [Remember My Choice] is [OFF]: Allows only once.
• Page 213
  To Enable or Disable Android Auto Select [Connected Services], and then press switch. Select a target device name, and then press switch. Select [Android Auto], and then press the switch. Continued…
• Page 214
  Audio System (Continued) To enable Android Auto: To disable Android Auto: Select [Enable], and then press the Select [Enable], and then press the switch to [ON] (enable) the function. switch to [OFF] (disable) the function. Return to the riding information, previous Return to the riding information, previous screen or Home screen.
• Page 215
  To Select Ask On or Ask Off of the Android Auto disclaimer Screen Select [Connected Services], and then press switch. Select a target device name, and then press switch. Select [Android Auto], and then press the switch. Continued…
• Page 216
  Audio System (Continued) To ask on connection: Select [Ask on Connection], and then press switch to [ON] (ask on) the function. Return to the riding information, previous screen or Home screen. (P38) You can also perform the above settings by using the touch screen.
• Page 217
  To Connect Your Android phone To Disconnect Your Android phone ● Do not leave your device in the vehicle You can disconnect your Android phone at at (under the front seat or under the rear seat any time. etc.). High heat will damage it. Make sure to follow the device’s instructions ●…
• Page 218
  Audio System (Continued) App launcher screen App launcher screen Home screen Phone Exit Maps Voice Go to Android Auto search Notification screen center Go to App launcher screen…
• Page 219
  Maps Display Google Maps and use the navigation function just as you would with your Android phone. When the vehicle is in motion, it is not possible to make keyboard entries. Stop the vehicle in a safe location to undertake a search or provide other inputs. Phone Make and receive phone calls as well as listen to voicemail.
• Page 220
  Audio System (Continued) Operating voice search CRF1100A/D To activate the voice search, a device such as Voice search may not be recognized correctly a headset must be paired. due to the effect of wind noise during running (P162) or external noise. In that case, try to change the position of the microphone.
• Page 221
  Below are examples of commands you can give with voice recognition : ● Reply to text. ● Call my wife. ● Navigate to Honda. ● Play my music. ● Send a text message to my wife. ● Call flower shop.
• Page 222
  Starting the Engine Make sure the engine stop switch is in the (Run) CRF1100A/A4 position. Start your engine using the following procedure, regardless of whether the engine is cold or warm. Turn the ignition switch to the ON position. Shift the transmission to Neutral ( indicator come on).
• Page 223
  If the engine does not start: Open the throttle fully and press the button for 5 seconds. START Repeat the normal starting procedure. If the engine starts, open the throttle slightly if idling is unstable. If the engine does not start, wait 10 seconds before trying steps &…
• Page 224
  Starting the Engine (Continued) Make sure the engine stop switch is in the (Run) CRF1100D/D4 position. Start your engine using the following procedure, regardless of whether the engine is cold or warm. Turn the ignition switch to the ON position. Check the transmission in Neutral ( indicator come on).
• Page 225
  Make sure the parking brake lever is released before riding. (P127) If Engine Does Not Start (P219) When you stop the engine To stop the engine, shift the transmission to Neutral ( indicator comes on). If you turn the ignition switch to the OFF position when the vehicle in gear, the engine will shut off with the clutch disengaged.
• Page 226
  Shifting Gears Recommended Shift Points CRF1100A/A4 Your vehicle transmission has 6 forward gears Shifting Up in a one-down, five-up shift pattern. From 1st to 2nd 12 mph (20 km/h) From 2nd to 3rd 19 mph (30 km/h) From 3rd to 4th 25 mph (40 km/h) From 4th to 5th 31 mph (50 km/h)
• Page 227
  Recommended Shift Points CRF1100D/D4 Your vehicle is equipped with an automatically Shifting Up controlled 6-speed transmission. It can be From 1st to 2nd 12 mph (20 km/h) shifted automatically (by AT MODE) or From 2nd to 3rd 19 mph (30 km/h) manually (by MT MODE).
• Page 228
  Shifting Gears (Continued) Dual Clutch Transmission CRF1100D/D4 N-D switch In order to respond to rider demands in a AT/MT switch broad range of situations, the transmission is equipped with three operating modes, AT MODE (including D mode for regular MODE MODE operation and three levels of S mode for sporty riding);…
• Page 229
  Neutral (N): Neutral is selected automatically When you can change between N and D when you turn the ignition switch to the ON Vehicle is stopped and the engine is idling. Throttle is completely closed. It is not possible position. to change from Neutral to D mode while the If neutral is not selected when you turn throttle is applied.
• Page 230
  Shifting Gears (Continued) AT MODE: In this mode the gears are shifted S mode (AT): Select this mode while riding in automatically according to your riding AT MODE when you need more power, such as conditions. when overtaking, climbing hills, pulling away. And also using the shift up switch (+) or shift S mode has three levels of adjustment.
• Page 231
  Changing between Neutral and AT Changing between AT MODE and MT MODE/MT MODE MODE Press the AT/MT switch Changing from Neutral (N) to AT MODE The AT indicator goes out while MT MODE is Press the side of the N-D switch selected The D mode indicator comes on and first gear The gear position is displayed on the gear position…
• Page 232
  Shifting Gears (Continued) S mode level selecting while in AT MODE N-D switch While in S mode, press and hold the side of the N-D ) switch. Close the throttle completely. Then select the desired level of the S mode. Level 1 Level 2 Level 1…
• Page 233
  Riding in MT MODE Gear shift operation Shift up and down with the shift up switch (+) Shifting Up: and shift down switch (−). Press the shift up switch (+) The selected gear is shown on the gear Shifting Down: position indicator.
• Page 234
  Cruise Control The cruise control system allows you to Cruise control is intended for use only on maintain a steady speed within a specified straight, uncongested highways. Do not use range. cruise control on city streets, winding roads, The available speed setting range and during bad weather, or at any other time operating gear are listed below: when you need total control of the throttle.
• Page 235
  To Set Cruise Control Make sure the travelling speed and operating gear are conformed to the requirements of the system. Any speed other than the available range will Cruise control not be memorized. SET indicator Press the cruise control main switch. (The cruise control main indicator will come on.) Cruise control…
• Page 236
  Cruise Control (Continued) To Change the Set Speed Any speed other than the possible setting range will not be indicated (stops at the upper or lower To Fine Tune the Set Speed limit speed). Select the riding information. (P38) To increase the set speed: tap the To Change the Set Speed Continuously cruise control lever to ●…
• Page 237
  ● To decrease speed: push and hold the To Manually Increase Vehicle Speed cruise control lever to Use the throttle in the normal manner to side. The system will automatically accelerate. slow your vehicle. When you reach the To return to the set speed, close the throttle desired speed, release the and coast without applying the brakes.
• Page 238
  Cruise Control (Continued) To Temporarily Disengage the System To resume cruise control: ● If you are still over 30 mph (50 km/h), Perform one of the following operations to push and release the disengage the system temporarily. ( cruise control lever to side.
• Page 239
  Cornering Light CRF1100A4/D4 The cornering light lights up the direction of travel of the vehicle when cornering. Operating conditions: ● Vehicle has been ridden at a speed of over 6 mph (10 km/h). ● When the vehicle banking left or right. Three-step lighting state is switched by the bank angle.
• Page 240
  Refueling Opening the Fuel Fill Cap Ignition key Lock cover Open the lock cover, insert the ignition key, and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap After refueling, push the fuel fill cap closed until it locks.
• Page 241
  To prevent entry of foreign matter into the Use accessory devices at your own risk. In no socket, be sure to close the cover when the event shall Honda be liable for any damages socket is not used. to your accessory device when in use.
• Page 242
  ( CRF1100A4/D4 USB socket Use USB devices at your own risk. In no event shall Honda be liable for any damage to your USB device when in use. Only USB devices within the following specifications can be connected.
• Page 243
  Connect a certified USB cable to the socket. To prevent the battery from becoming weak (or dead), keep the engine running while drawing Route the USB cable along the recess. current from the socket. Pass the USB cable through the cover slit and To prevent entry of foreign matter into the close the cover.
• Page 244
  Storage Equipment Helmet holder Use the helmet holder only when parked. A helmet holder is located under the rear seat. Removing the rear seat (P273) Helmet set wire WARNING Riding with a helmet attached to the holder can interfere with your ability to safely operate the vehicle and could lead Helmet holder Helmet D-ring…
• Page 245
  Helmet Set Wire Document Bag The helmet set wire is secured on the rear fender The document bag is located on the under the rear seat. underside of the front seat. Helmet set Document bag wire Removing the rear seat Removing the front seat (P273) (P270)
• Page 246
  Storage Equipment (Continued) Fuse Puller, Hex Wrench, Tool Kit Standard/Phillips Screwdriver, Canada Screwdriver Handle The tool kit is located in the tool box. The fuse puller, hex wrench, standard/phillips Tool box screwdriver and screwdriver handle are located on the underside of the rear seat. Standard/Phillips Hex wrench Tool kit…
• Page 247
  Rear Carrier Never exceed the maximum weight limit. Maximum Weight: 22 lb (10 kg) Rear carrier…

• Page 248: Maintenance

  Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ….P. 245 Engine Oil ……….. P. 277 Maintenance Schedule ……P. 247 Coolant …………P. 279 Maintenance Record………

• Page 249: Importance Of Maintenance

  Importance of Maintenance For information about the exhaust emission and Importance of Maintenance noise emission requirements of the U.S. Keeping your vehicle well-maintained is Environmental Protection Agency (EPA), the absolutely essential to your safety and to protect California Air Resources Board (CARB), and the your investment, obtain maximum performance, Environment and Climate Change Canada avoid breakdowns, and reduce air pollution.

• Page 250
  Importance of Maintenance Maintenance Safety Always read the maintenance instructions before you begin each task and make sure that you have the tools, parts, and skills required. We cannot warn you of every conceivable hazard that can arise in performing maintenance.

• Page 251: Maintenance Schedule

  Maintenance work should be performed in owner. accordance with Honda’s standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. All scheduled…

• Page 252
  : Intermediate. We recommend service by your dealer, unless you Inspect (clean, adjust, lubricate, or replace, if necessary) have the necessary tools and are mechanically skilled. Lubricate Procedures are provided in an official Honda Service Manual Replace (2 P. 359). Clean : Technical.
• Page 253
  Maintenance Schedule Frequency × 1,000 mi Refer Items Regular Replace × 1,000 km 12.8 19.2 25.6 32.0 38.4 page Drive Chain Every 600 mi (1,000 km): Drive Chain Slider – Brake Fluid 2 Years Brake Pads Wear Brake System Brake Light Switch Brake Lock Operation Headlight Aim –…

• Page 254: Maintenance Record

  Maintenance Record Distance Odometer Date Performed By: Notes 600 miles (1,000 km) 4,000 miles (6,400 km) 8,000 miles (12,800 km) 12,000 miles (19,200 km) 16,000 miles (25,600 km) 20,000 miles (32,000 km) 24,000 miles (38,400 km) 28,000 miles (44,800 km) 32,000 miles (51,200 km) 36,000 miles (57,600 km) 40,000 miles (64,000 km)

• Page 255: Maintenance Fundamentals

  Maintenance Fundamentals Check the following items if you are carrying a Pre-ride Inspection passenger or cargo: To ensure safety, it is your responsibility to Combined weight is within load limits P. 373 ● perform a pre-ride inspection and make sure Cargo is secured properly ●…

• Page 256
  Maintenance Fundamentals Check the following items at regular intervals: Before riding off-road check all of the preceding Oil level is between the upper and lower level plus the following: ● marks P. 277 Make sure spokes are tight. Check the rims for ●…
• Page 257
  Maintenance Fundamentals Also, check the odometer reading against the Periodic Checks Maintenance Schedule and perform all You should also perform other periodic maintenance that is due. P. 247 maintenance checks at least once a month regardless of how often you ride, or more often if you ride frequently.
• Page 258
  Maintenance Fundamentals Replacing Parts Always use Honda Genuine Parts or their equivalents to ensure reliability and safety. When ordering colored components, specify the model name, color, and code mentioned on the color label. The color label is attached to the rear fender under the rear seat.
• Page 259
  Maintenance Fundamentals Lithium-Ion (Li-Ion) Battery WARNING Your vehicle has a lithium-ion (li-ion) battery. The battery contains flammable organic Clean the battery terminals if they become dirty solvent as electrolyte. or corroded. NOTICE You can be burned or seriously injured if An improperly disposed of battery can be harmful to the the battery is handled improperly.
• Page 260
  Maintenance Fundamentals Cleaning the Battery Terminals Charging 1. Remove the battery. P. 267 If you use electrical accessories that drain the 2. If the terminals are starting to corrode and are battery or you do not ride frequently, we coated with a white substance, wash with recommend that you charge the battery every warm water and wipe clean.
• Page 261
  For fuse Bump starting is not recommended. ratings, see “Specifications.” P. 376 NOTICE Blown Installing non-Honda electrical accessories can overload fuse the electrical system, discharging the battery and possibly damaging the system. Fuses NOTICE…
• Page 262
  “Resource Conserving” on the circular API service For recommended engine oil, see symbol. “Specifications.” P. 375 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: JASO T 903 standard : MA ●…
• Page 263
  Wipe up spills immediately and wash thoroughly. chain inspected by your dealer. Recommended brake fluid: Also inspect the drive sprocket and driven Honda DOT 4 Brake Fluid or equivalent sprocket. If either has worn or damaged teeth, WARNING have the sprocket replaced by your dealer.
• Page 264
  Use a soft brush if spray onto your clothes and the vehicle. the chain is dirty. After cleaning, wipe dry and lubricate with the recommended lubricant. Recommended lubricant: Pro Honda HP Chain Lube or equivalent…
• Page 265
  Maintenance Fundamentals Recommended Coolant Crankcase Breathers Pro Honda HP Coolant is a pre-mixed solution of Service more frequently when riding in rain, at antifreeze and distilled water. full throttle, or after the vehicle is washed or overturned. Service if the deposit level can be Concentration: seen in the transparent section of the drain tube.
• Page 266
  Maintenance Fundamentals If you decide to adjust the tire pressure for a Inspecting for Damage particular off-road riding condition, make Inspect the tires for changes a little at a time. cuts, slits, or cracks CRF1100A4/D4 that expose fabric or Even if the direction of the valve stem is changed, cords, or nails or other do not return it to the original position.
• Page 267
  Maintenance Fundamentals Inspecting Tread Depth Inspecting Rims and Valve Stems Inspect the tread wear indicators. If they become Inspect the rims for damage and loose spokes. visible, replace the tires immediately. Also inspect the valve stems for their positions. For safe riding, you should replace the tires when A tilted valve stem indicates the tube is slipping the minimum tread depth is reached.
• Page 268
  Installing improper tires on your vehicle load range. can adversely affect handling and Have the wheel balanced with Honda Genuine ● stability, and can cause a crash in which balance weights or equivalent after the tire is you can be seriously hurt or killed.
• Page 269
  Maintenance Fundamentals Tire Identification Number (TIN) Tire Service Life The tire identification number (TIN) is a group of The service life of your tires is dependent on numbers and letters located on the sidewall of many factors, including, but not limited to, riding the tire.

• Page 270: Tools

  Tools You can perform some roadside repairs, minor The helmet set wire is secured with the rear adjustments and parts replacement with the fender under the rear seat. 2 P. 241 provided tools. Helmet set wire ● Canada The 5 mm hex wrench, standard/phillips The tool kit is stored in the tool box.

• Page 271: Removing & Installing Body Components

  Removing & Installing Body Components Battery 1. Remove the tool box. P. 274 2. Disconnect the negative terminal from the battery. Positive terminal 3. Disconnect the positive terminal from the battery. Terminal nuts 4. Remove the clip. P. 269 Negative 5.

• Page 272: Battery Box Cover

  Removing & Installing Body Components Battery Box Cover Battery Box Cover Removal 1. Remove the bolts using the hex wrench Battery box cover provided on the underside of the rear seat. P. 242 2. Remove the battery box cover. Installation Install the parts in the reverse order of removal.

• Page 273: Clip

  Removing & Installing Body Components Clip Clip Installation 1. Insert the clip into the hole. Removal 2. Push the pin in. 1. Remove the pin by a Phillips screwdriver. 2. Pull the clip out of the hole.

• Page 274: Front Seat

  Removing & Installing Body Components Front Seat Front Seat Installation When setting the high seat position: Removal Insert the front lower prong and center lower prongs into the front stay and center Front seat stays on the fuel tank, and insert the rear hooks into the upper slots.

• Page 275
  Removing & Installing Body Components Front Seat High position: Low position: Center Center Rear Rear upper lower Front Front hooks hooks prongs prongs lower upper prong prong Front Front seat seat Upper slots Lower slots Front stay Front stay Center stays Center stays Continued…
• Page 276
  Removing & Installing Body Components Front Seat 2. Install the front seat while pushing it forward and downward. Make sure that the seat is locked securely in position by pulling it up lightly. 3. Install the rear seat.

• Page 277: Rear Seat

  Removing & Installing Body Components Rear Seat Rear Seat Removal 1. Insert the ignition key into the seat lock. 2. Turn the ignition key clockwise, then push the rear seat forward and up. Rear seat Tabs Tabs Installation 1. Insert the tabs into the recesses. 2.

• Page 278: Tool Box

  Removing & Installing Body Components Tool Box Tool Box Removal 1. Remove the bolts using the hex wrench Bolts provided on the underside of the rear seat. Tabs P. 242 2. Remove the tool box by releasing its slots from the tabs. Installation Install the parts in the reverse order of removal.

• Page 279: Spark Arrester

  Spark Arrester Cleaning the Spark Arrester Tail cap Regular servicing prevents carbon buildup (which can diminish engine performance) and also complies with USDA regulations for regular maintenance to assure proper function. The spark arrester prevents random sparks from the combustion process in your engine from reaching the environment.

• Page 280
  Spark Arrester Cleaning the Spark Arrester 3. Remove the spark arrester mounting bolts, spark arresters and gaskets from the muffler. Spark arrester mounting bolts Spark arrester Spark arrester screen 5. Install the gaskets and the spark arresters, and tighten the spark arrester mounting bolts.

• Page 281: Engine Oil

  Engine Oil Checking the Engine Oil Oil fill cap 1. Place your vehicle on its side stand on a Upper level firm, level surface. 2. If the engine is cold, idle the engine for 3 to 5 minutes. 3. Turn the ignition switch to the OFF position and wait for 2 to 3 minutes.

• Page 282
  Engine Oil Adding Engine Oil Adding Engine Oil 2. Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient oil can level mark, add the recommended engine oil. cause damage to your engine.

• Page 283: Coolant

  Coolant Checking the Coolant Check the coolant level in the reserve tank while the engine is cold. 1. Place your vehicle on a firm, level surface. 2. Hold your vehicle in an upright position. 3. Check that the coolant level is between the UPPER level and LOWER level marks on the reserve tank.

• Page 284
  Coolant Adding Coolant 1. Remove the reserve tank cap and add fluid Reserve tank cap while monitoring the coolant level. Do not overfill above the UPPER level mark. Make sure no foreign objects enter the reserve tank opening. 2. Securely reinstall the reserve tank cap. WARNING Removing the radiator cap while the engine is hot can cause the coolant to…

• Page 285: Brakes

  Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or the brake 1. Place your vehicle in an upright position on lever and pedal freeplay becomes excessive, a firm, level surface. inspect the brake pads for wear.

• Page 286
  Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Check the condition of the brake pad wear Always inspect both left and right brake indicators. calipers. The pads need to be replaced if a brake Front Inspect the brake pads from the rear Rear…
• Page 287
  Brakes Checking the Parking Brake Checking the Parking Brake Place your vehicle on a firm, level surface. Stop the engine and push your vehicle while CRF1100D/D4 set the parking brake to check the efficacy of the parking brake. Lock lever If the efficacy of the parking brake becomes weak, have the brake adjusted by your dealer.
• Page 288
  Brakes Adjusting the Brake Light Switch Adjusting the Brake Light Brake light switch Switch Check the operation of the brake light switch. Hold the brake light switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

• Page 289: Side Stand

  Side Stand Checking the Side Stand CRF1100A/A4 Sit on the vehicle, shift the transmission to Neutral, and raise the side stand. CRF1100D/D4 Sit on the vehicle and raise the side stand. CRF1100A/A4 Start the engine, pull the clutch lever in, and shift the transmission into gear.

• Page 290: Drive Chain

  Drive Chain Inspecting the Drive Chain 3. Pull the upper half of the drive chain up and check the chain slack between the Slack drive chain and swing-arm at the end of the drive chain slider. Check the drive chain slack at several points along the chain.

• Page 291
  Drive Chain Inspecting the Drive Chain Slack 4. Roll the vehicle forward and check that the chain moves smoothly. 5. Inspect the sprockets. P. 259 6. Clean and lubricate the drive chain. P. 260…

• Page 292: Wheels

  Wheels Wheels Rims & Spokes It is not necessary to remove the wheels to perform the recommended service in the Keeping the wheels true (round) and Maintenance Schedule. However, information maintaining correct spoke tension is critical to for wheel removal is provided for emergency safe vehicle operation.

• Page 293
  Wheels Wheels Rims & Spokes 1. Inspect the wheel rims and spokes for CRF1100A/D damage. 2. Tighten any loose spokes. Wheel CRF1100A4/D4 Use the ballpoint hexagon wrench with a Spoke length of 5.5 in (140 mm) or more. 3. Rotate the wheel slowly to see if it appears to “wobble.”…

• Page 294: Clutch

  Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary have it replaced by your CRF1100A/A4 dealer. Lubricate the clutch cable with a commercially Checking the Clutch Lever Freeplay available cable lubricant to prevent premature Check the clutch lever freeplay.

• Page 295
  Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper lock nut Freeplay – CRF1100A/A4 Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. 1. Loosen the upper lock nut. 2. Turn the upper clutch cable adjuster until the freeplay is 3/8 — 13/16 in (10 — 20 mm).
• Page 296
  Clutch Adjusting the Clutch Lever Freeplay 1. Loosen the upper lock nut and turn the Lower lock nut upper clutch cable adjuster all the way in (to provide maximum freeplay). Tighten the upper lock nut. 2. Loosen the lower lock nut. 3.

• Page 297: Throttle

  Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, close automatically, have the vehicle inspected by your dealer. Throttle…

• Page 298: Other Adjustments

  Other Adjustments Adjusting the Brake Lever Adjuster You can adjust the distance between the tip of the brake lever and handle grip. Adjustment method Index mark Turn the adjuster until the numbers align with the index mark while pushing the lever Forward forward in the desired position.

• Page 299: Adjusting The Front Suspension

  Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Spring Preload CRF1100A/D You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using a suitable box end wrench. Adjuster The spring preload adjuster has 15 turns.Turn clockwise to increase spring preload (hard), or turn counterclockwise to decrease spring…

• Page 300
  Other Adjustments Adjusting the Front Suspension Rebound Damping Reference CRF1100A/D punch mark You can adjust the rebound damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
• Page 301
  Other Adjustments Adjusting the Front Suspension Compression Damping CRF1100A/D You can adjust the compression damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat. P.
• Page 302
  Other Adjustments Adjusting the Front Suspension Damping Available setting range: ● [Overall]: [H] Hard / [M] Medium / [S] Soft CRF1100A4/D4 / [O] Off Road When the riding mode is changed, front ● [Front]: [-]/[Medium]/[+] suspension damping is automatically Default: ●…

• Page 303: Adjusting The Rear Suspension

  Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension Spring Preload CRF1100A/D You can adjust the spring preload by the adjuster knob to suit the load or the road surface. The spring preload adjuster has 35 position or more. Turn the clockwise to increase spring preload (high), or turn counterclockwise to decrease spring preload (low).

• Page 304
  Other Adjustments Adjusting the Rear Suspension 5. Select [PRELOAD]. CRF1100A4/D4 The electrically adjustable suspension allows 6. Push the of the sel left/ the preload of the rear suspension to be right switch until the desired value is adjusted in four levels according to riding and displayed.
• Page 305
  Other Adjustments Adjusting the Rear Suspension The rear suspension adjustment provides the NOTICE following settings. The rear shock absorber damper unit contains high Status icon Riding condition pressure nitrogen gas. Do not attempt to disassemble, service, or improperly dispose of the damper. See your Rider only dealer.
• Page 306
  Other Adjustments Adjusting the Rear Suspension Rebound Damping Reference CRF1100A/D punch mark You can adjust the rebound damping by the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
• Page 307
  Other Adjustments Adjusting the Rear Suspension Compression Damping Reference CRF1100A/D punch You can adjust the compression damping by mark the adjuster to suit the load or the road surface. Turn the adjuster using the Standard/Phillips screwdriver provided on the underside of the rear seat.
• Page 308
  Other Adjustments Adjusting the Rear Suspension Damping Available setting range: ● [Overall]: [H] Hard / [M] Medium / [S] Soft CRF1100A4/D4 / [O] Off Road When the riding mode is changed, rear ● [Rear]: [-]/[Medium]/[+] suspension damping is automatically Default: ●…

• Page 309: Adjusting The Windscreen Height

  Other Adjustments Adjusting the Windscreen Height Adjusting the Windscreen 3. Release the right and left lock levers at the desired position while checking height the Height indicator. Make sure that the windscreen is locked CRF1100A4/D4 securely by slightly moving the right and You can adjust the windscreen height 1 of 5 left lock levers up or down.

• Page 310
  Other Adjustments Adjusting the Windscreen Height If the windscreen does not move smoothly, clean the sliders using a sponge or a soft towel with neutral detergent to remove dust. Do not apply a lubricant to the sliders. If the windscreen does not move smoothly after cleaning the sliders, have your vehicle inspected by your dealer.

• Page 311: Troubleshooting

  Troubleshooting Engine Will Not Start ……..P. 308 Fuel Gauge Failure Indication……P. 314 Overheating (Segment H flashes in coolant Coolant Temperature Gauge Failure temperature gauge) ……..P. 309 Indication…………P. 315 Warning Indicators On or Flashing ..P. 310 Handle Grip Heater Failure Indication..P. 315 Low Oil Pressure Indicator…….P.

• Page 312: Engine Will Not Start

  Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting sequence. Check the correct engine starting sequence. ● ● P. 218 P.

• Page 313: Overheating (Segment H Flashes In Coolant Temperature Gauge)

  Overheating (Segment H flashes in coolant temperature gauge) The engine is overheating when the following 2. Check that the radiator fan is operating, occurs: and then turn the ignition switch to the OFF All segments turn red and the segment H position.

• Page 314: Warning Indicators On Or Flashing

  Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious If the low oil pressure indicator comes on, pull problem. Have your vehicle inspected by your safely to the side of the road and stop the dealer.

• Page 315: Abs (Anti-Lock Brake System) Indicator

  Warning Indicators On or Flashing ABS (Anti-lock Brake System) Indicator ABS (Anti-lock Brake If the ABS indicator stays on, your brakes will continue to work as a conventional system, System) Indicator but without the anti-locking function. If the indicator operates in one of the The ABS indicator may flash if you turn the following ways, you may have a serious rear wheel while the rear wheel is lifted off the…

• Page 316: Torque Control Indicator

  Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator Even when the Torque Control indicator is on, your vehicle will have normal riding ability If the indicator operates in one of the without Torque Control function. following ways, you may have a serious When the indicator comes on while the problem with the Torque Control.

• Page 317: If The «-» Indicator Is Blinking In The Gear Position Window While Riding

  If the “–” Indicator is Blinking in the Gear Position Window While Riding CRF1100D/D4 If you still cannot start the engine: If the “–” indicator is blinking while riding, you Start the engine while applying the brake lever may have a serious problem with the Dual or pressing the brake pedal.

• Page 318: Other Warning Indications

  Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, all segments will blink as shown in the illustration. If these occur, see your dealer as soon as possible.

• Page 319: Coolant Temperature Gauge Failure Indication

  Other Warning Indications Coolant Temperature Gauge Failure Indication Coolant Temperature Gauge Handle Grip Heater Failure Failure Indication Indication If the cooling system has an error, all CRF1100A4/D4 segments will blink as shown in the illustration. If the handle grip heater system has an error, If this occurs, see your dealer as soon as the handle grip heater status icon will blink.

• Page 320: Tire Puncture

  Tire Puncture Repairing a puncture or removing a wheel Riding your vehicle with a temporary tire requires special tools and technical expertise. repair is very risky. Do not exceed 30 mph (50 We recommend you have this type of service km/h).

• Page 321
  Tire Puncture Tube Repair and Replacement Tube Repair and Replacement Anytime a tube is replaced, the tire should be carefully inspected as described. CRF1100A/D WARNING If a tube is punctured or damaged, you should replace it as soon as possible. A tube that is Riding your vehicle with a temporary tire repaired may not have the same reliability as a or tube repair can be risky.

• Page 322: Audio System Trouble

  Audio System Trouble Symptom Cause/remedy Some Bluetooth devices and application software you use may ® be incompatible with the audio system and/or the operable functions may be limited. Check that the audio system and Bluetooth device are both in ® P.

• Page 323
  Audio System Trouble Symptom Cause/remedy Depending on the Bluetooth device and application software ® you use, it may take some time for the audio system to connect to a device and to start playing an audio file. The connection may be temporarily disconnected when starting Unable to connect the engine, which is normal and not a malfunction.
• Page 324
  Audio System Trouble Symptom Cause/remedy Some Bluetooth devices and application software you use may ® not connect automatically. For connecting, follow the instructions in the instruction manual of your Bluetooth device. ® The Bluetooth devices that can be connected at the same time ®…
• Page 325
  Audio System Trouble Symptom Cause/remedy Some Bluetooth devices and application software you use may ® be incompatible with the audio system and/or audio files may not be played properly. Check the recommended specifications. P. 156 Depending on the Bluetooth device and application software ®…
• Page 326
  Audio System Trouble Symptom Cause/remedy Presence of another Bluetooth device or a device that emits ® electromagnetic waves such as communication equipment in the vicinity sometimes affects the communication. Due to the characteristics of Bluetooth , though in rare cases, the ®…
• Page 327
  Audio System Trouble Symptom Cause/remedy Depending on the Bluetooth device and application software ® you use, an audio file may not play normally after receiving a telephone call, etc. Turn off the power to the audio system and then turn it on again. If the skipping of sounds or mixing of noises Sounds skip continues, check the status of your Bluetooth device.
• Page 328
  Audio System Trouble Symptom Cause/remedy Adjust the volume while in the individual modes. P. 93 Audio volume from Check the volume setting of the Bluetooth audio device. ® headset is low/high Check the volume setting of the paired headset. Depending on the audio device and the audio file, nothing may be displayed or the display may be inaccurate in some cases.
• Page 329
  Audio System Trouble Symptom Cause/remedy Connected Bluetooth device may be an unsupported device. ® Check the supported Bluetooth version/profiles. P. 156 ® When the Bluetooth connection is unstable due to surrounding ® Bluetooth handsfree ® conditions or radio wave conditions, the handsfree calling calling is not functioning functions may not be available.
• Page 330
  Audio System Trouble Symptom Cause/remedy Depending on the connection status, the times displayed in call history on the vehicle side or the phone side may differ. Bluetooth Handsfree ® Depending on your mobile carrier plan, available functions may differ. calling problems A display delay may occur depending on the number of phone books, call history and music data etc.
• Page 331
  Audio System Trouble Symptom Cause/remedy Connected iPhone may be an unsupported model. Check the models compatible with Apple CarPlay. P. 190 Connected iPhone may be an unsupported iOS version. Update the iPhone to the newer version. Apple CarPlay is not To use Apple CarPlay, a headset connection is necessary.
• Page 332
  Audio System Trouble Symptom Cause/remedy When the paired headset connection is broken due to headset battery depletion or communication failure, Apple CarPlay cannot be used until the connection is restored. The screen will not switch to Apple CarPlay automatically, other than when the ignition switch is turned to the OFF position with Apple CarPlay activated.
• Page 333
  Audio System Trouble Symptom Cause/remedy Connected Android phone may be unsupported model. Check the compatible model with Android Auto. P. 204 Connected Android phone may be unsupported Android version. Update the Android phone to the newer version. Android Auto is not To use full function of Android Auto, a headset connection is functioning necessary.
• Page 334
  Audio System Trouble Symptom Cause/remedy When the paired headset connection is broken due to headset battery depletion or communication failure, go back to the Home screen, and pair the headset connection again. Some USB cables may be incompatible with Android Auto. For Android Auto, the USB cables should be certified by USB-IF to be compliant with USB 2.0 Standard.
• Page 335
  Audio System Trouble Symptom Cause/remedy You cannot operate Apple CarPlay/Android Auto by the touch Connected, but does not panel while the vehicle is in motion. Operate with the left operate Apple CarPlay/ handlebar switches or park your vehicle in a safe place, then Android Auto.
• Page 336
  Audio System Trouble Symptom Cause/remedy To protect the system, some operations may be limited High temperature/ temporarily. The system automatically recovers after the cause is overcurrent protection solved. The statements in this owner’s manual may not match your Software update vehicle’s Audio System after performing the software update.

• Page 337: Electrical Trouble

  Electrical Trouble Battery Goes Dead Burned-out Light Bulb Battery charging is needed. All light bulbs on the vehicle are LEDs. If there A battery charger recommended by your is an LED which is not turned on, see your lithium-ion (li-ion) battery manufacturer is dealer for servicing.

• Page 338: Blown Fuse

  Electrical Trouble Blown Fuse Blown Fuse Before handling fuses, see “Inspecting and Replacing Fuses.” P. 257 Fuse Box Fuses & ABS FSR Fuse 1. Remove the front seat. P. 270 2. Open the fuse box covers. 3. Pull the fuses out with the fuse puller provided on the underside of the rear seat Fuse box cover…

• Page 339
  Electrical Trouble Blown Fuse Main Fuse & ABS Main Fuse 1. Remove the battery box cover. P. 268 2. Pull the starter magnetic switch out. 3. Remove the starter magnetic switch cover. Starter magnetic 4. Pull the main fuse and ABS main fuse out switch cover with the fuse puller provided on the ABS main…
• Page 340
  Electrical Trouble Blown Fuse FI Fuse & Main 2 Fuse 1. Remove the battery box cover. P. 268 2. Pull the FI fuse box and main 2 fuse box CRF1100A/A4 suspension out. 3. Open the fuse box cover. Fuse box covers 4.
• Page 341
  Electrical Trouble Blown Fuse FI Fuse & Main 2 Fuse & DCT Main 1. Remove the battery box cover. P. 268 Fuse 2. Pull the main 2 fuse/FI main fuse box and DCT fuse box suspension out. CRF1100D/D4 3. Open the fuse box covers. 4.

• Page 342: Information

  Authorized Manuals……..P. 359 Keys …………P. 339 Warranty Coverage and Service ….P. 360 Instruments, Controls, & Other Honda Contacts ……… P. 363 Features ………… P. 340 Reporting Safety Defects ……P. 365 Caring for Your Vehicle ……P. 345 Legal Information on Apple CarPlay/Android Storing Your Vehicle………

• Page 343: Service Diagnostic Recorders

  However this data may be accessed by Honda, number. its authorised dealers and authorised repairers, employees, representatives and contractors only…

• Page 344: Instruments, Controls, & Other Features

  Instruments, Controls, & Other Features Instruments, Controls, & Ignition key Key tag Other Features Ignition Switch Leaving the ignition switch in the ON position with the engine stopped will drain the battery. Do not turn the key while riding. Key number and bar code Engine Stop Switch Do not use the engine stop switch except in an emergency.

• Page 345
  Instruments, Controls, & Other Features Odometer Audio system The display locks at 999,999 when the read-out 1: E-Label instructions as listed below exceeds 999,999. Viewing E-Label Compliance and Regulatory Information 1.Select the Clock Tripmeter 2.Select Settings > Regulatory The tripmeters return to 0.0 when each read-out 2: FCC 2 Part Statement exceeds 9,999.9.
• Page 346
  Instruments, Controls, & Other Features This equipment has been tested and found Reorient or relocate the receiving ● to comply with the limits for a Class B digital antenna. device, pursuant to part 15 of the FCC rules. Increase the separation between the ●…
• Page 347
  Instruments, Controls, & Other Features This device complies with Innovation, Science Document Bag and Economic Development Canada license- The owner’s manual, registration, and insurance exempt RSS standard(s). Operation is subject to information can be stored in the plastic the following two conditions: (1) this device may document bag located on the underside of the not cause interference, and (2) this device must front seat.
• Page 348
  Instruments, Controls, & Other Features Assist-slipper Clutch System Automatic Brightness Control and Background Control CRF1100A/A4 The assist-slipper clutch system helps to prevent Ambient brightness is detected by the the rear tire from locking up when the photosensor. deceleration of your vehicle produces a strong Do not damage or cover the photosensor.

• Page 349: Caring For Your Vehicle

  Frequent cleaning and polishing is important to 4. After the vehicle dries, lubricate any moving ensure the life of your Honda. A clean vehicle parts. makes it easier to spot potential problems.

• Page 350
  Caring for Your Vehicle Washing Precautions Do not direct water at the air cleaner: ● Follow these guidelines when washing: Water in the air cleaner can prevent the Do not use high-pressure washers: engine from starting. ● High-pressure water cleaners can damage Do not direct water near the headlight: ●…
• Page 351
  Caring for Your Vehicle Aluminum Components Panels Aluminum will corrode from contact with dirt, Follow these guidelines to prevent scratches and mud, or road salt. Clean aluminum parts blemishes: regularly and follow these guidelines to avoid Wash gently using a soft sponge and plenty of ●…
• Page 352
  Caring for Your Vehicle Windscreen Exhaust Pipe and Muffler Using plenty of water, clean the windscreen with The exhaust pipe and muffler are stainless steel but a soft cloth or sponge. (Avoid using detergents may become stained by mud or dust. or any kind of chemical cleaner on the windscreen.) Dry with a soft, clean cloth.

• Page 353: Storing Your Vehicle

  For more information about storage, chrome pieces with rust-inhibiting oil. Canada Lubricate the drive chain. P. 259 visit our website at www.honda.ca and look up ● Place your vehicle on a maintenance stand “Storage Tips” under the “Honda Warranty” in ●…

• Page 354: Transporting Your Vehicle

  Transporting Your Vehicle Transporting Your Vehicle If your vehicle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform, and motorcycle tie-down straps. Never try to tow your vehicle with a wheel or wheels on the ground.

• Page 355: You & The Environment

  You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling center. but you must do your part to protect the Call your local or state office of public works or environment.

• Page 356: Vehicle Identification Number

  Vehicle Identification Number Vehicle Identification Number The VIN and engine serial number uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place.

• Page 357: Emission Control Systems

  (CO), Compliance with the terms of the oxides of nitrogen (NOx), and hydrocarbons Distributor’s Warranties for Honda Motorcycle (HC). Gasoline evaporation also emits Emission Control Systems is necessary in order to hydrocarbons. Controlling the production of maintain a valid emissions system warranty.

• Page 358
  Emission Control Systems Ignition Timing Control System Noise Emission Requirements The ignition timing control system adjusts the The EPA requires that vehicles built after January ignition timing to reduce the amount of HC, CO, 1, 1983 comply with applicable noise emission and NOx produced.
• Page 359
  Emission Control Systems Crankcase Emissions Control System Noise Emission Control System TAMPERING WITH THE NOISE CONTROL The engine is equipped with a closed crankcase SYSTEM IS PROHIBITED: system to prevent discharging crankcase emissions into the atmosphere. U. S. federal law prohibits, and Canadian Blow-by gas is returned to the combustion provincial laws may prohibit, the following acts or chamber through the air cleaner and throttle…
• Page 360
  Emission Control Systems AMONG THOSE ACTS PRESUMED TO Problems Affecting Vehicle Exhaust CONSTITUTE TAMPERING ARE THE Emissions FOLLOWING ACTS: Have your vehicle inspected and repaired by Removal of, or puncturing the muffler, baffles, ● your dealer if you experience any of the header pipes or any other component which following symptoms: conducts exhaust gases.

• Page 361: Catalytic Converter

  A defective catalytic converter contributes to air and turn off the engine. Have your vehicle pollution and can impair your engine’s serviced as soon as possible. performance. A replacement unit must be an original Honda part or equivalent.

• Page 362: Oxygenated Fuels

  Oxygenated Fuels Oxygenated Fuels system or performance problems resulting from the use of an oxygenated fuel containing higher Some conventional fuels blended with alcohol or percentages are not covered by your warranty. an ether compound are available in some locales NOTICE to help reduce emissions to meet clean air Improper use of oxygenated fuels can damage metal,…

• Page 363: Authorized Manuals

  Authorized Manuals Authorized Manuals These Honda manuals are written for the professional technician. However, if you possess The Service Manual used by your the proper tools, observe the safety standards, authorized dealer is available from your Honda and are mechanically capable, you should find dealer or Helm, Inc.

• Page 364: Warranty Coverage And Service

  Honda. Your warranty coverage does not apply to the normal wear and Coverage deterioration associated with use of the vehicle. Your new Honda is covered by the following Your warranty coverage is not voided if you warranties: perform your own maintenance. However, Vehicle Limited Warranty ●…

• Page 365
  Warranty Coverage and Service service provider caused damage to another part Statement on Warranty Coverage for of the vehicle otherwise covered under warranty Aftermarket and Recycled Parts before denying warranty coverage. Additionally, The Magnuson-Moss Warranty Act, 15 U.S.C. federal law allows a manufacturer to void a s.2301 et seq., makes it illegal for motor vehicle motor vehicle warranty or deny warranty manufacturers to void a motor vehicle warranty…
• Page 366
  If a misunderstanding occurs and you aren’t vehicle, call the service department of your satisfied with your dealer’s handling of the Honda dealer. Make an appointment for an situation, we suggest you discuss your problem inspection and diagnosis. You will be asked to with the appropriate member of the dealership’s management team.

• Page 367: Honda Contacts

  P.O. Box 2200, Torrance, CA 90509-2200 Product model, year, and VIN ● Mailstop: 100-4W-5F Date of purchase ● Dealer name and address ● Telephone: (866) 784-1870 We will likely ask your Honda dealer to respond, or possibly acknowledge your comments directly. Website: https://powersports.honda.com/ contact-us Continued…

• Page 368
  Honda Contacts Your Honda Dealer The service department of your Honda dealer offers trained personnel to perform regular maintenance and unexpected repairs. It has the latest available service information from Honda and also handles warranty inspections and repairs. The parts department offers Honda Genuine…

• Page 369: Reporting Safety Defects

  Reporting Safety Defects Reporting Safety Defects dealer, or American Honda Motor Co., Inc. If you believe that your vehicle has a To contact NHTSA, you may call the defect which could cause a crash or Vehicle Safety Hotline toll-free at:…

• Page 370
  If you believe that your vehicle has a Investigations and Recalls Division, defect which could cause a crash or could cause injury or death, you should Mailing Address: immediately inform Honda Canada Inc. Transport Canada — ASFAD and you may also inform Transport 330 Sparks Street Canada.
• Page 371
  Reporting Safety Defects For more information on reporting safety defects or about motor vehicle safety, go to https://www.tc.gc.ca/roadsafety.

• Page 372: Legal Information On Apple Carplay/Android Auto

  Legal Information on Apple CarPlay/Android Auto Legal Information on RISKS ASSOCIATED WITH THE USE OF CARPLAY, INCLUDING THE POTENTIAL FOR Apple CarPlay/Android DRIVER DISTRACTION. Auto SEE APPLE’S PRIVACY POLICY FOR DETAILS REGARDING APPLE’S USE AND HANDLING OF OWNER’S MANUAL LICENSE/LIABILITY DATA UPLOADED BY CARPLAY.

• Page 373
  Legal Information on Apple CarPlay/Android Auto USE OF ANDROID AUTO IS SUBJECT TO YOUR SEE GOOGLE’S PRIVACY POLICY FOR DETAILS AGREEMENT TO THE ANDROID AUTO TERMS REGARDING GOOGLE’S USE AND HANDLING OF USE WHICH MUST BE AGREED TO WHEN OF DATA UPLOADED BY ANDROID AUTO. THE ANDROID AUTO APPLICATION IS DOWNLOADED TO YOUR ANDROID PHONE.
• Page 374
  ALL WARRANTIES AND CONDITIONS WITH AGAINST LOSS OF APPLICATION DATA, WHICH RESPECT TO THE APPLICATIONS AND MAY BE LOST AT ANY TIME; HONDA DOES INFORMATION ON THE APPLICATIONS, EITHER NOT GUARANTEE THAT THE APPLICATIONS OR EXPRESS, IMPLIED OR STATUTORY, INCLUDING,…
• Page 375
  REGARDLESS OF THE THEORY OF LIABILITY UPDATES, ETC., SERVICES MAY BE (CONTRACT, TORT OR OTHERWISE) AND EVEN IF HONDA WERE ADVISED OF THE POSSIBILITY UNAVAILABLE IN YOUR AREA OR LOCATION, ETC. IN ADDITION, YOU UNDERSTAND THAT OF SUCH DAMAGES. SOME REGIONS AND…

• Page 376: Software Upgrades

  Software Upgrades Software Upgrades Upgrades Honda is continually expanding the scope of the system software. The softwares are updated to correspond with new version releases. For the software updates, contact your dealer.

• Page 377: Specifications

  Specifications Specifications Main Components ■ Specifications Maximum weight capacity 450 lb (204 kg) Overall length 91.7 in (2,330 mm) Maximum weight on rear 22 lb (10 kg) Overall width 37.8 in (960 mm) carrier Passenger capacity Rider and 1 passenger CRF1100A/D 54.9 in (1,395 mm) Minimum turning radius…

• Page 378
  Specifications Service Data ■ HY110 Battery Front 90/90-21M/C 54H 12 V-6 Ah (20 HR) Tire size Rear 150/70R18M/C 70H CRF1100A/A4 2.866 CRF1100A/D Bias-ply, tube 1.888 Front 1.480 CRF1100A4/D4 Bias-ply, tubeless 1.230 Tire type 1.064 CRF1100A/D Radial, tube 0.972 Rear Gear ratio CRF1100A4/D4 CRF1100D/D4 Radial, tubeless…
• Page 379
  API service label, SAE AX41TF L engine oil 10W-30, JASO T 903 standard MA, Pro Honda METZELER KAROO STREET Recommended GN4 4-stroke oil (USA & Canada) or Honda 4- Tire CRF1100A/D stroke oil, or an equivalent motorcycle oil BRIDGESTONE BATTLAX CRF1100A/A4…
• Page 380
  6.6 lbf·ft (9.0 N·m, 0.9 kgf·m) Recommended Tail cap mounting bolt 6.6 lbf·ft (9.0 N·m, 0.9 kgf·m) drive chain Pro Honda HP Chain Lube or equivalent lubricant Drive chain slack 1 7/8 — 2 1/16 in (48 — 53 mm) DID 525HV3 Standard drive chain No.
• Page 381
  Information Record Engine No. Color Label & Code Owner’s Name Address City/State Phone Dealer’s Name Address City/State Phone Service Manager…
• Page 382
  California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
• Page 383
  31MLG800 00X31-MLG-8000 PRINTED IN USA…

инструкцияHonda CRF1100L Africa Twin Adventure Sports (2022)

CRF1100A/AL/AL2/AL4

CRF1100DL/DL2/DL4

CRF1100D/D2/D4

32MLG800

00X32-MLG-8000

300.2021.09.N

PRINTED IN JAPAN

O

英

00X32-MLG-8000

CRF1100A/AL/AL2/AL4/DL/DL2/DL4/D/D2/D4

Посмотреть инструкция для Honda CRF1100L Africa Twin Adventure Sports (2022) бесплатно. Руководство относится к категории мотоциклы, 1 человек(а) дали ему среднюю оценку 8.1. Руководство доступно на следующих языках: английский. У вас есть вопрос о Honda CRF1100L Africa Twin Adventure Sports (2022) или вам нужна помощь? Задайте свой вопрос здесь

Главная

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Honda CRF1100L Africa Twin Adventure Sports (2022).

Не нашли свой вопрос? Задайте свой вопрос здесь

MANUALSCAT | RU

Вопросы и ответы

У вас есть вопрос о Honda Africa Twin CRF1100L (2021), но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Honda Africa Twin CRF1100L (2021). Пожалуйста, убедитесь, что вы опишите свои трудности с Honda Africa Twin CRF1100L (2021) как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.