Мануал на русском для мазда 5

Войти
Зарегистрироваться

Quick Links

Chapters

• Page 3
  Mazda product. Important Notes About This Manual Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you resell the vehicle, leave this manual with it for the next owner.

• Page 4: How To Use This Manual

  Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.

• Page 5: Table Of Contents

  Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts.

• Page 7: Your Vehicle At A Glance

  Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard and Interior Overview … 1-2 Exterior Overview … 1-4…

• Page 8
  Your Vehicle at a Glance Dashboard and Interior Overview The equipment and installation position varies by vehicle…
• Page 9
  Your Vehicle at a Glance Dashboard and Interior Overview Power window switches … page 3-13 Lighting control … page 5-45 Turn and lane-change signals … page 5-48 Instrument cluster … page 5-28 Air bags … page 2-39 Wiper and washer lever … page 5-49 Hazard warning flasher switch …

• Page 10: Exterior Overview

  Your Vehicle at a Glance Exterior Overview The equipment and installation position varies by vehicle…

• Page 11
  Your Vehicle at a Glance Exterior Overview Rear window defroster … page 5-53 Rear wiper blade … page 8-28 Light bulbs … page 8-36 Liftgate … page 3-11 Antenna … page 6-17 Fuel-filler lid … page 3-15 Sliding doors … page 3-9 Power windows …

• Page 13: Essential Safety Equipment

  Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats … 2-2 Front Seats … 2-2 Second-Row Seats … 2-6 Third-Row Seat … 2-11 Seat Belt Systems … 2-14 Seat Belt Precautions … 2-14 Seat Belt …

• Page 14: Seats

  Such modifications could damage the supplemental restraint system and result in serious injury. Consult an Authorized Mazda Dealer if there is any need to remove or reinstall the front seats. Do not drive with damaged front seats: Driving with damaged front seats is dangerous.

• Page 15
  Always sit in a passenger seat properly with the seatback upright and feet on the floor: If your vehicle is equipped with front passenger seat weight sensors, sitting in the front passenger seat improperly out of position or with the seatback reclined too far while the vehicle is moving is dangerous as it can take off weight from the seat…
• Page 16
  Essential Safety Equipment Seats qHeight Adjustment (Driver’s Seat) By moving the seat lever up or down, the seat bottom height can be adjusted. Down qLumbar Support Adjustment (Driver’s Seat) To adjust the lumbar support, pull the lever forward. qHead Restraint WARNING Always drive with the head restraints installed when seats are being used…
• Page 17
  í qSeat Warmer The front seats are electrically heated. The ignition must be in the ON position. Press the switch to turn the seat warmer on or off. When the switch is in the ON position, the indicator light will come on. Indicator Essential Safety Equipment WARNING…

• Page 18: Second-Row Seats

  Essential Safety Equipment Seats NOTE Use the seat warmer when the engine is running, and do not continue to use it for a long period. The temperature of the seat warmer cannot be adjusted because the temperature of the seat is controlled by the thermostat.

• Page 19
  Do not drive with the seatback unlocked: The seatback plays an important role in your protection in a vehicle. Leaving the seatback unlocked is dangerous as it can allow passengers to be ejected or thrown around and baggage to strike occupants in a sudden stop or collision, resulting in severe injury.
• Page 20
  Essential Safety Equipment Seats qSeat Recline WARNING Do not drive with the seats reclined: Sitting in a reclined position while the vehicle is moving is dangerous because you don’t get the full protection from the seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries.
• Page 21
  qArmrest The armrest can be used or placed upright. WARNING Never position the shoulder portion of a second-row seat belt over the armrest: Positioning the shoulder portion of a second-row seat belt over the armrest is dangerous as it cannot provide adequate protection in a collision and could result in serious injuries.
• Page 22
  Essential Safety Equipment Seats qFolding the Second-Row Seats To create a flat luggage compartment space, lift the seat-bottoms of the second- row seats and fold the seatbacks forward. Folding the seatbacks 1. Insert the second-row outboard seat belts in the retainers. 2.

• Page 23: Third-Row Seat

  NOTE To create a flat luggage compartment space from the rear of the vehicle to the back of the front seats, fold the second-row and third-row seats (page 2-12). Returning seatbacks to their original positions 1. Return the seatback to its original position while raising its lever.

• Page 24
  Essential Safety Equipment Seats Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving: Driving with a passenger on the folded seatback is dangerous. Allowing a child to sit up on the folded seatback while the vehicle is moving is particularly dangerous.
• Page 25
  Essential Safety Equipment Seats 4. Pull the strap and fold the seatback forward. NOTE To create a flat luggage compartment space from the rear of the vehicle to the back of the front seats, fold the second-row and third-row seats (page 2-10). To return third-row seat to its original position Return the seatback to its original position…

• Page 26: Seat Belt Systems

  Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.

• Page 27: Seat Belt

  Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt systems in use during an accident before they are used again.

• Page 28
  Essential Safety Equipment Seat Belt Systems CAUTION Belt retraction may become difficult if the belts and rings are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/Shoulder Belt Webbing” (page 8-55). Ring qPregnant Women and Persons with Serious Medical Conditions Pregnant women should always wear seat belts.
• Page 29
  Essential Safety Equipment Seat Belt Systems qAutomatic Locking Mode Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an accident. To enable seat belt automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system. It will retract down to the child-restraint system and stay locked on it.
• Page 30
  Essential Safety Equipment Seat Belt Systems Seat Belt qFastening the Seat Belt 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt. 3. Insert the tongue into the buckle until you hear a click. Buckle WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous.
• Page 31
  If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer. To secure the outboard-rear seat belts when not in use, insert the belts in their seat belt retainers.

• Page 32: Front Seat Belt Pretensioner And Load Limiting Systems

  Even if the pretensioners have not fired, the load limiting function must be checked by an Authorized Mazda Dealer. 2-20 WARNING Wear seat belts only as recommended in this owner’s manual:…

• Page 33
  If the seat belt pretensioners are not replaced, the risk of injury in a collision will increase. Always have an Authorized Mazda Dealer inspect the seat belt pretensioners and air bags after any collision. Expended seat belt pretensioners and air bags must be replaced after any collision which caused them to deploy.

• Page 34: Seat Belt Extender

  ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident.

• Page 35
  WARNING Do not use a seat belt extender unless it is necessary: Using a seat belt extender when not necessary is dangerous. The seat belt will be too long and not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured.

• Page 36: Seat Belt Warning Light/Beep

  Minder NOTE The belt minder can be deactivated. Consult an Authorized Mazda Dealer to deactivate and restore the seat belt minder. 2-24 Driver seated/Front passenger not seated The belt minder is a supplemental warning to the seat belt warning function.

• Page 37
  Driver seated/Front passenger seated The seat belt warning function reminds the front passenger to fasten the seat belt according to the chart below. Vehicle speed Between 0 Condition km/h 12 mph) Seat belt (Driver) Seat belt (Passenger) Indicator Beep : Fastened : Unfastened : Illuminated : Flashing…

• Page 38: Child Restraint

  Even if the front passenger air bag is shut off, Mazda strongly recommends that children be properly restrained and child-restraint systems of all kinds are properly secured on the rear seats which are the best place for children.

• Page 39
  WARNING Use the correct size child-restraint system: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident. Follow the manufacturer’s instructions and always keep the child-restraint system buckled down: An unsecured child-restraint system is dangerous.
• Page 40
  Essential Safety Equipment Child Restraint Do not install a front-facing child-restraint system on the front passenger seat unless it is unavoidable: In a collision, the force of a deploying air bag could cause serious injury or death to the child. If installing a front-facing child-restraint system on the front passenger seat is unavoidable, move the front passenger seat as back as possible.
• Page 41
  NOTE Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seats. When using these anchors to secure a child-restraint system, refer to “LATCH Child-Restraint Systems” (page 2-36).

• Page 42: Installing Child-Restraint Systems

  Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective. In your Mazda, tethered child-restraint systems can only be accommodated in the four positions on the rear seats.

• Page 43
  4. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. 5. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible.
• Page 44
  Essential Safety Equipment Child Restraint Anchor bracket location (Third-row seat) Anchor bracket Tether strap position (Third-row seat) Tether strap 2-32 WARNING Use the tether and tether anchor only for a child-restraint system: Marking Using the tether or tether anchor to secure anything but a child-restraint system is dangerous.
• Page 45
  NOTE To check if your front seats have side air bags: Mazda vehicles equipped with side air bag will have a “SRS AIRBAG” tag on the outboard shoulder of the front seats. To check if your vehicle has curtain air…
• Page 46
  Essential Safety Equipment Child Restraint Do not allow a child to lean over or against the side window of a vehicle with side and curtain air bags: It is dangerous to allow anyone to lean over or against the side window, the area of the front passenger seat, the front and rear window pillars and the roof edge along both sides from…
• Page 47
  If the indicator light does not illuminate after seating a child in a child-restraint system on the front passenger seat, seat a child in a child-restraint system on the rear seat and consult an Authorized Mazda Dealer as soon as possible. 2-35…

• Page 48: Latch Child-Restraint Systems

  Child Restraint LATCH Child-Restraint Systems Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Most LATCH child-restraint systems must also be used in conjunction with a tether to be effective.

• Page 49
  qLATCH Child-Restraint System Installation Procedure (Second- Row Seats Only) 1. Slide the second-row seat as far back as possible. 2. Make sure the seatback is securely latched by pushing it back until it is fully locked. 3. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.
• Page 50
  Essential Safety Equipment Child Restraint WARNING Use the tether and tether anchor only for a child-restraint system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.

• Page 51: Srs Air Bags

  Supplemental Restraint Systems (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 6 air bags. Please verify which kinds of air bags are equipped on your vehicle by locating the SRS AIRBAG location indicators. These indicators are visible in the area where the air bags are installed.

• Page 52
  Essential Safety Equipment SRS Air Bags WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in the first collision with frontal, near frontal or side forces that are at least moderate.
• Page 53
  Sit in the center of the seat and wear seat belts properly: Sitting too close to the side air bag modules or placing hands on them is extremely dangerous. The side air bags inflate with great force and speed directly out of the outboard side of the front seat and expand along the front door on the side the car is hit.
• Page 54
  Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that familiarization with all instructions about them, from the Owner’s Manual, is important.

• Page 55: Supplemental Restraint System Components

  Supplemental Restraint System Components The supplemental restraint systems (SRS) have two basic subsystems: The air bag system with inflators and air bags. The electrical system with crash sensors and diagnostic module. The air bags are mounted in the following locations: The steering wheel hub The front passenger dashboard The outboard sides of the front seatbacks…

• Page 56
  Essential Safety Equipment SRS Air Bags qFront Air Bag System Components (10) (1) Front dual stage inflators and air bags (2) Front air bag sensor (3) Front passenger air bag deactivation indicator light (page 2-46) (4) Crash sensors and diagnostic module (SAS unit) (5) Front seat belt pretensioner and load limiting systems (page 2-20) (6) Front passenger seat weight sensors (page 2-46) (7) Front passenger seat weight sensor control module…
• Page 57
  Essential Safety Equipment SRS Air Bags qSide and Curtain Air Bag System Components (1) Air bag/front seat belt pretensioner system warning light (page 2-54) (2) Side and curtain inflators and air bags (3) Front seats (4) Side crash sensor (5) Crash sensors and diagnostic module (SAS unit) 2-45…

• Page 58: How The Air Bags Work

  The front air bags will function only once. After that, the front air bags will not work again and must be replaced. Only an Authorized Mazda Dealer can replace the system components. The front, dual stage air bags control air bag inflation in two energy stages. During an impact of moderate severity the front air bags deploy with lesser energy, whereas during more severe impacts, they deploy with more energy.

• Page 59
  Front passenger seat weight sensors Your vehicle is equipped with the front passenger seat weight sensors (page 2-34). These sensors are located under both of the front passenger seat rails. These sensors determine the total seated weight on the front passenger seat. The SAS unit is designed to prevent the front passenger front and side air bags and seat belt pretensioner system from deploying if the total seated weight is less than approximately 30 kg (66 lb).
• Page 60
  ON position and does not illuminate as indicated in the above chart, do not allow a child to sit in the front passenger seat and consult an Authorized Mazda Dealer as soon as possible. The system may not work properly in an accident.
• Page 61
  Do not increase the total seated weight on the front passenger seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat from the total seated weight of approximately 30 kg (66 lb) is dangerous.
• Page 62
  The side and curtain air bags will function only once. After that, the side and curtain air bags will not work again and must be replaced. Only an Authorized Mazda Dealer can replace the systems. 2-50 The side and curtain air bags will deploy only on the side the vehicle receives the force of the impact.
• Page 63
  qAir Bag Activation/Deactivation NOTE If the front passenger seat weight sensors detect a total seated weight on the front passenger seat is less than approximately 42 kg (93 lb), the front passenger front and side air bags and seat belt pretensioner may not deploy (page 2-46), but the curtain air bags may deploy.
• Page 64
  Essential Safety Equipment SRS Air Bags Frontal offset impact to the vehicle may not provide the stopping force necessary for air bag deployment. Rear-ending or running under a truck’s tail gate may not provide the stopping force necessary for air bag deployment. Non-activation of front air bags Front air bags will not normally inflate in the following cases:…
• Page 65
  Side impacts involving trees or poles can cause severe cosmetic damage but may not have enough impact force to activate the side and curtain air bags. Vehicle roll-over may not provide enough side force to deploy the side and curtain air bags. Side impacts with two-wheeled vehicles may not provide enough force to deploy the side and curtain air bags.
• Page 66
  ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident.
• Page 67
  Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.
• Page 68
  2-56…

• Page 69: Knowing Your Mazda

  Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks … 3-2 Keys … 3-2 Keyless Entry System … 3-3 Door Locks … 3-6 Liftgate … 3-11 Power Windows … 3-13 Fuel-Filler Lid and Cap … 3-15 Hood …

• Page 70: Doors And Locks

  Write down the code number and keep it in a separate safe and convenient place, but not in the vehicle. If your key is lost, consult your Authorized Mazda Dealer and have your code number ready. Key extend/retract method (Retractable type key) To extend the key, press the release button.

• Page 71: Keyless Entry System

  To install a new battery, refer to Maintenance (page 3-4). Additional transmitters can be obtained at an Authorized Mazda Dealer. Up to 3 transmitters can be used with the keyless entry system per vehicle. Bring all transmitters to an Authorized Mazda Dealer when additional transmitters are required.

• Page 72
  Knowing Your Mazda Doors and Locks NOTE Pressing the transmitter lock button to lock the doors while any door is open does not sound the horn. (Without theft-deterrent system) The hazard warning lights will flash once to indicate that all doors and the liftgate are locked.
• Page 73
  Doors and Locks 2. Insert a screwdriver into the slot and push the tab to remove the key from the transmitter. 3. Insert a screwdriver into the slot and gently pry open the transmitter. 4. Remove the battery. Knowing Your Mazda…

• Page 74: Door Locks

  Authorized Mazda Dealer. If your transmitter is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative. CAUTION Radio equipment like this is governed by laws in the United States.

• Page 75
  Sliding doors To lock a sliding door from the inside, slide the door-lock knob toward the front. To unlock, slide it toward the back. Lock Unlock Knowing Your Mazda Door-lock knob…
• Page 76
  Knowing Your Mazda Doors and Locks To lock a sliding door with the door-lock knob from the outside, slide the door-lock knob toward the front to the lock position and close the door (pulling the door handle is not required).
• Page 77
  NOTE When you leave the vehicle, stop the engine and lock the doors. And do not put valuables in your vehicle to prevent theft. Knowing Your Mazda Doors and Locks Pillar Rail…
• Page 78
  Knowing Your Mazda Doors and Locks Opening/closing from inside To open, pull the inner door handle toward the back. To close, push the inner door handle toward the front. Close Open Opening/closing from outside Pull the outer door handle and slide the door.

• Page 79: Liftgate

  Power Door Locks (page 3-8). qLocking, Unlocking with Transmitter The liftgate can be locked/unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System (page 3-3). í Some models. Knowing Your Mazda 3-11…

• Page 80
  1. Remove the cover on the interior surface of the liftgate. Cover 2. Turn the lever to the right to unlock the liftgate. ) slightly After performing this emergency measure, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Lever…

• Page 81: Power Windows

  CAUTION To prevent burning out the fuse and damaging the power window system, do not open or close more than three windows at once. Knowing Your Mazda 3-13…

• Page 82
  Knowing Your Mazda Doors and Locks qOperating the Driver’s Side Power Window Manual opening/closing To open the window to the desired position, lightly hold down the switch. To close the window to the desired position, pull up the switch. Driver’s window…

• Page 83: Fuel-Filler Lid And Cap

  CAUTION Always use only a genuine Mazda fuel cap or an approved equivalent, available at an Authorized Mazda Dealer. The wrong cap can result in a serious malfunction of the fuel and emission control systems.

• Page 84
  If the light remains on (even after you have tightened the cap securely, driven, and restarted the engine several times), it may indicate a different problem. Contact an Authorized Mazda Dealer as soon as possible.

• Page 85: Hood

  2. Insert the support rod in its clip while holding up the hood. Verify that the support rod is secured in the clip before closing the hood. 3. Close the hood so that it locks securely. Knowing Your Mazda Clip Support rod 3-17…

• Page 86: Moonroof Í

  NOTE After washing your Mazda or after it rains, wipe the water off the moonroof before operating it to avoid water penetration which could cause rust and water damage to your headliner.

• Page 87
  The sunshade can be opened and closed by hand. The sunshade opens automatically when the moonroof is opened, but must be closed by hand. Sunshade CAUTION The sunshade does not tilt. To avoid damaging the sunshade, do not push up on it. Knowing Your Mazda 3-19…

• Page 88: Security System

  Knowing Your Mazda Security System Immobilizer System The immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle.

• Page 89
  If the security indicator light flashes continuously while you are driving, don’t shut off the engine. Go to an Authorized Mazda Dealer and have it checked. If you shut off the engine while the light is flashing you won’t be able to restart it.

• Page 90: Theft-Deterrent System Í

  Always keep a spare key, in case one is lost. If a key is lost, contact an Authorized Mazda Dealer as soon as possible. If you lose a key, an Authorized Mazda Dealer will reset the electronic codes of your remaining keys and immobilizer system.

• Page 91
  Unlock a door with the key. Press the unlock button on the keyless entry system transmitter. NOTE If you have any problem with the theft- deterrent system, consult an Authorized Mazda Dealer. qModification and Add-On Equipment Mazda cannot guarantee the theft-…
• Page 92
  Knowing Your Mazda Security System Mazda recommends that you affix it to the lower rear corner of a front door window. 3-24…

• Page 93: Steering Wheel And Mirrors

  Power mirror The ignition switch must be in the ACC or ON position. To adjust: 1. Press the left or right side of the selector switch to choose the left or right side mirror. Knowing Your Mazda 3-25…

• Page 94
  Knowing Your Mazda Steering Wheel and Mirrors 2. Depress the mirror switch in the appropriate direction. Mirror switch After adjusting the mirror, lock the control by placing the selector switch in the middle position. Folding the mirror Fold the outside mirror rearward until it is flush with the vehicle.
• Page 95
  Do not stack cargo or objects higher than the seatbacks: Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes. Knowing Your Mazda Steering Wheel and Mirrors 3-27…
• Page 96
  3-28…

• Page 97: Before Driving Your Mazda

  Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions … 4-2 Fuel Requirements … 4-2 Emission Control System … 4-3 Engine Exhaust (Carbon Monoxide) … 4-4 Before Starting the Engine … 4-5 Before Getting In … 4-5 After Getting In …

• Page 98: Fuel And Engine Exhaust Precautions

  Ø Never add fuel system additives. Never add cleaning agents other than those specified by Mazda. Other cleaning agents and additives may damage the system. Consult an Authorized Mazda Dealer. Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels.

• Page 99: Emission Control System

  Ø USE ONLY UNLEADED FUEL. Ø Do not drive your Mazda with any sign of engine malfunction. Ø Do not coast with the ignition switch turned off. Ø Do not descend steep grades in gear with the ignition switch turned off.

• Page 100: Engine Exhaust (Carbon Monoxide)

  When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately. Do not run the engine when inside an enclosed area: Running the engine inside an enclosed area, such as a garage, is dangerous.

• Page 101: Before Starting The Engine

  NOTE Engine oil, engine coolant, brake/clutch fluid, washer fluid, and other fluid levels should be inspected. See Maintenance, Section 8. Before Driving Your Mazda Before Starting the Engine After Getting In Are all doors closed and locked? Is the seat adjusted properly?

• Page 102: Driving Tips

  No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda. Don’t race the engine. Don’t maintain one constant speed, either slow or fast, for a long period of time.

• Page 103: Hazardous Driving

  NOTE Use snow chains only on the front wheels. Before Driving Your Mazda Driving Tips Rocking the Vehicle WARNING Do not spin the wheels at more than 56…

• Page 104: Winter Driving

  Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask an Authorized Mazda Dealer to perform the following precautions: Have the proper ratio of antifreeze in the radiator.

• Page 105: Driving In Flooded Area

  Install the chains on the front tires. Do not use chains on the rear tires. Use only genuine Mazda tire chains. Please consult an Authorized Mazda Dealer. Installing the chains 1.

• Page 106: Overloading

  Before Driving Your Mazda Driving Tips Overloading WARNING Be careful not to overload your vehicle: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) of your vehicle are on the Motor Vehicle Safety Standard Label on the driver’s door frame. Exceeding these ratings can cause an accident or vehicle damage.

• Page 107: Towing

  Before Driving Your Mazda Towing Trailer Towing The Mazda5 is not designed for towing. Never tow a trailer with your Mazda5. 4-11…

• Page 108
  4-12…
• Page 109
  Driving Your Mazda Explanation of instruments and controls. Starting and Driving … 5-2 Ignition Switch … 5-2 Starting the Engine … 5-4 Brake System … 5-5 Manual Transaxle Operation … 5-9 Automatic Transaxle Controls … 5-11 Power Steering … 5-17 í…

• Page 110: Starting And Driving

  Driving Your Mazda Starting and Driving Ignition Switch qIgnition Switch Positions LOCK The steering wheel locks to protect against theft. Only in this position can the key be removed. Manual transaxle To turn the key from the ACC to the…

• Page 111
  (page 5-33). qIgnition Key Reminder If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver’s door is opened. Driving Your Mazda…

• Page 112: Starting The Engine

  Driving Your Mazda Starting and Driving Starting the Engine NOTE Engine-starting is controlled by the spark ignition system. This system meets all Canadian Interference- Causing Equipment Standard requirements regulating the impulse electrical field strength of radio noise. 1. Occupants should fasten their seat belts.

• Page 113: Brake System

  Brake System qFoot Brake Your Mazda has power-assisted brakes that adjust automatically through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual.

• Page 114
  Driving Your Mazda Starting and Driving qParking Brake WARNING Before leaving the driver’s seat, always put the key to LOCK position, set the parking brake and make sure the shift lever is in P with an automatic transaxle or in 1 or R with a manual…
• Page 115
  Starting and Driving NOTE Having to add brake fluid is sometimes an indicator of leakage. Consult an Authorized Mazda Dealer as soon as possible even if the brake light is no longer illuminated. WARNING Do not drive with the brake system warning light illuminated.
• Page 116
  ABS. Should this happen, consult an Authorized Mazda Dealer as soon as possible. NOTE When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on.

• Page 117: Manual Transaxle Operation

  WARNING Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving when the brake system warning light and ABS warning light are illuminated at the same time is dangerous.

• Page 118
  Driving Your Mazda Starting and Driving WARNING Do not use sudden engine braking on slippery road surfaces or at high speeds: Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous.

• Page 119: Automatic Transaxle Controls

  If you notice the engine speed going higher or hear the engine racing, confirm you have not accidentally slipped into manual shift mode (page 5-13). Driving Your Mazda Starting and Driving 5-11…

• Page 120
  Driving Your Mazda Starting and Driving qTransaxle Ranges The shift lever must be in P or N to operate the starter. P (Park) P locks the transaxle and prevents the front wheels from rotating. WARNING Always set the shift lever to P and set…
• Page 121
  Cover 3. Move the shift lever. Starting and Driving 4. Take the vehicle to an Authorized Mazda Dealer to have the system checked. qManual Shift Mode This mode gives you the feel of driving a manual transaxle vehicle by operating the…
• Page 122
  Driving Your Mazda Starting and Driving Gear position indicator The numeral for the selected gear illuminates. Shift position indicator Gear position indicator NOTE If the gears cannot be shifted down when driving at higher speeds, the gear position indicator will flash twice to signal that the gears cannot be shifted down.
• Page 123
  M2→M1 44 km/h (27 mph) During deceleration, the gears shift down automatically when speed is reduced to the following: Gear Vehicle speed M5 or M4→M3 30 km/h (19 mph) M3 or M2→M1 10 km/h (6 mph) Driving Your Mazda 5-15…
• Page 124
  Driving Your Mazda Starting and Driving NOTE The gear does not shift down to M1 automatically while in the second gear fixed mode. Recommendations for shifting Upshifting For normal acceleration and cruising, we recommend these shift points. Gear Vehicle speed…

• Page 125: Power Steering

  If the steering feels stiffer than usual during normal driving, consult an Authorized Mazda Dealer. CAUTION Never hold the steering wheel to the extreme left or right for more than 5 seconds with the engine running.

• Page 126: Cruise Control

  Driving Your Mazda Starting and Driving Cruise Control With cruise control, you can set and automatically maintain any speed of more than about 30 km/h (19 mph). WARNING Do not use the cruise control under the following conditions: Using the cruise control under the…

• Page 127
  1.6 km/h (1 mph) by a momentary tap of the RES/+ button. Multiple taps will increase your vehicle speed 1.6 km/h (1 mph) for each tap. Driving Your Mazda 5-19…
• Page 128
  Driving Your Mazda Starting and Driving To increase speed using accelerator pedal Depress the accelerator pedal to accelerate to the desired speed. Press the SET/- button and release it immediately. NOTE Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed.
• Page 129
  Driving Your Mazda Starting and Driving Press the CANCEL button. The system is off when the ignition is off. NOTE Cruise control will cancel at about 15 km/h (9 mph) below the preset speed (such as may happen when climbing a long, steep grade) or below 30 km/h (19 mph).

• Page 130: Tire Pressure Monitoring System

  Driving Your Mazda Starting and Driving í Tire Pressure Monitoring System The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.

• Page 131
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Driving Your Mazda Starting and Driving 5-23…
• Page 132
  Authorized Mazda Dealer or a tire repair station. Do not ignore the TPMS Warning Light: Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated.
• Page 133
  Leaks need to be addressed by more than simply refilling the trouble tire as leaks are dangerous — take it to an Authorized Mazda Dealer which has all the equipment to fix tires, TPMS systems and order the best replacement tire for your vehicle.
• Page 134
  The signal code must be registered with the TPMS before it can work. The easiest way to do it is to have an Authorized Mazda Dealer change your tire and complete ID signal code registration. When having tires changed at an…
• Page 135
  Replacing tires and wheels CAUTION Ø When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged. Ø The wheels equipped on your Mazda are specially designed for installation of the tire pressure sensors.
• Page 136
  Driving Your Mazda Instrument Cluster and Indicators Speedometer … page 5-29 Odometer, Trip Meter and Trip Meter Selector … page 5-29 Tachometer … page 5-30 Engine Coolant Temperature Gauge … page 5-30 Fuel Gauge … page 5-31 Dashboard Illumination … page 5-31…

• Page 137: Instrument Cluster And Indicators

  Trip meter The trip meter can record the total distance of two trips. One is recorded in trip meter A, and the other is recorded in trip meter B. Driving Your Mazda Press the selector Press the selector 5-29…

• Page 138
  Driving Your Mazda Instrument Cluster and Indicators For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled. When trip meter A is selected, pressing the selector again within one second will change to trip meter B mode.
• Page 139
  When driving on snowy or foggy roads, or in other situations when the instrument cluster or information display’s visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer and increase the illumination intensity. Driving Your Mazda position. Bright 5-31…
• Page 140
  Driving Your Mazda Instrument Cluster and Indicators To cancel the illumination dimmer, rotate the knob clockwise fully. You will hear a beep sound and the illumination dimmer will be canceled. NOTE If the dashboard illumination knob is kept at the illumination dimmer cancel position, the…
• Page 141
  Brake System Warning Light Charging System Warning Light Engine Oil Pressure Warning Light Check Engine Light ABS Warning Light Air Bag/Front Seat Belt Pretensioner System Warning Light Low Fuel Warning Light Warning/Indicator Lights Driving Your Mazda Page 5-35 5-36 5-36 5-37 5-35 5-37…
• Page 142
  Driving Your Mazda Warning/Indicator Lights and Beep Sounds Signal Seat Belt Warning Light/Beep Door-Ajar Warning Light Low Washer Fluid Level Warning Light Automatic Transaxle Warning Light Tire Pressure Monitoring System Warning Light Security Indicator Light Headlight High-Beam Indicator Light Shift Position Indicator Light…

• Page 143: Warning/Indicator Lights And Beep Sounds

  NOTE Having to add brake fluid is sometimes an indicator of leakage. Consult an Authorized Mazda Dealer as soon as possible even if the brake light is no longer illuminated. Do not drive with the brake system warning light illuminated. Contact an…

• Page 144
  WARNING Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving when the brake system warning light and ABS warning light are illuminated at the same time is dangerous.
• Page 145
  The fuel-filler cap is missing or not tightened securely. If the check engine light remains on or flashes continuously, do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible. qAir Bag/Front Seat Belt Pretensioner System Warning Light…
• Page 146
  Belt minder NOTE The belt minder can be deactivated. Consult an Authorized Mazda Dealer to deactivate and restore the seat belt minder. Driver seated/Front passenger not seated The belt minder is a supplemental warning to the seat belt warning function.

• Page 147: Warning Light

  Close the door securely before driving the vehicle. qLow Washer Fluid Level Warning Light This warning light indicates that little washer fluid remains. Add fluid (page 8-25). Driving Your Mazda í í 5-39 Some models.

• Page 148
  CAUTION If the automatic transaxle warning light illuminates, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible. qTire Pressure Monitoring System…
• Page 149
  Leaks need to be addressed by more than simply refilling the trouble tire as leaks are dangerous — take it to an Authorized Mazda Dealer which has all the equipment to fix tires, TPMS systems and order the best replacement tire for your vehicle.
• Page 150
  If the engine doesn’t start with the correct ignition key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized Mazda Dealer. 5-42 qHeadlight High-Beam Indicator Light This light indicates one of two things: The high-beam headlights are on.
• Page 151
  If the light remains illuminated, the power steering is still inoperable. Consult an Authorized Mazda Dealer. NOTE The power steering system is inoperable when the power steering malfunction indicator light illuminates.

• Page 152: Warning/Indicator Lights

  Driving Your Mazda Warning/Indicator Lights and Beep Sounds qTurn-Signal/Hazard Warning Indicator Lights When operating the turn signal lights, the left or right turn signal indicator light flashes to indicate which turn signal light is operating (page 5-48). When operating the hazard warning lights, both turn signal indicator lights flash (page 5-54).

• Page 153: Switches And Controls

  AUTO position and the ignition switch is in the ON position, the light sensor senses the surrounding lightness or darkness and automatically turns on or off the headlights, other exterior lights and dashboard illumination (see chart above). Driving Your Mazda Switches and Controls Auto 5-45…

• Page 154
  The timing for turning on the headlights, other exterior lights and dashboard illumination can be delayed by adjusting the sensitivity of the light sensor. Consult an Authorized Mazda Dealer regarding sensor adjustment. Xenon fusion headlight bulbs The low-beam bulbs of the headlights have xenon fusion bulbs that produce a bright white beam over a wide area.
• Page 155
  For that reason, the daytime running lights automatically turn on when the ignition switch is turned to the ON position. NOTE The Daytime Running Lights turn off when the parking brake is applied. í Some models. Driving Your Mazda Switch Load Position × × 5-47…

• Page 156: Turn And Lane-Change Signals

  Driving Your Mazda Switches and Controls Turn and Lane-Change Signals qTurn Signal Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.

• Page 157: Windshield Wipers And Washer

  After 5 minutes, turn on the switch and the blades should operate normally. If they don’t resume functioning, consult an Authorized Mazda Dealer as soon as possible. Drive to the side of the road and park off the right-of- way. Wait until the weather clears before trying to drive with the wipers inoperative.

• Page 158
  Driving Your Mazda Switches and Controls Type B (With AUTO position) Turn the wipers on by pulling the lever down. AUTO Auto control Low speed High speed For a single wiping cycle, push the lever up to Mist AUTO (Auto-wiper control)
• Page 159
  In this case, pull the wiper lever to the 1 or 2 position for manual operation, or remove the ice, dirt or foreign matter by hand to restore the auto-wiper operation. Driving Your Mazda 5-51…

• Page 160: Rear Window Wiper And Washer

  If the washer doesn’t work, inspect the fluid level (page 8-25). If it’s OK, consult an Authorized Mazda Dealer. 5-52 Rear Window Wiper and Washer The ignition switch must be in the ON position.

• Page 161: Rear Window Defroster

  í qMirror Defroster To turn on the mirror defrosters, turn the ignition switch to the ON position and push the rear window defroster switch (page 5-53). í Some models. Driving Your Mazda 5-53…

• Page 162: Horn

  Driving Your Mazda Switches and Controls Horn To sound the horn, press the the steering wheel. 5-54 Hazard Warning Flasher mark on The hazard warning lights should always be used when you stop on or near a roadway in an emergency.

• Page 163: Interior Comfort

  Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System … 6-2 Operating Tips … 6-2 Vent Operation … 6-3 Types of the Climate Control System … 6-5 í Manual Type … 6-6 Fully Automatic Type Rear Ventilation System Audio System …

• Page 164
  Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient. Consult an Authorized Mazda Dealer for refrigerant inspection. The air conditioner is filled with HFC134a (R134a), a refrigerant that will not damage the ozone layer.

• Page 165: Climate Control System

  Interior Comfort Climate Control System Vent Operation Knob Close Open qAdjusting the Vents Directing airflow You can direct air flow by moving the adjustment knob. Horizontal air flow can be adjusted by pressing the vent left or right. Opening/closing vents These vents can be opened and closed with wheel.

• Page 166
  Interior Comfort Climate Control System qSelecting the Airflow Mode Dashboard Vents Dashboard and Floor Vents Floor Vents Defroster and Floor Vents Defroster Vents…

• Page 167: Types Of The Climate Control System

  Interior Comfort Climate Control System Types of the Climate Control System Manual type and fully automatic type climate control systems are explained separately. Check your vehicle’s climate control type and read the appropriate pages. Manual Type … page 6-6 Fully Automatic Type … page 6-10 Fully Automatic Type …

• Page 168: Manual Type Í

  Interior Comfort Climate Control System Temperature control dial A/C switch qControl Switches Temperature control dial Cold This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold. í Some models. Manual Type Fan control dial Mode selector dial Air intake selector Fan control dial This dial allows variable fan speeds.

• Page 169
  Mode selector dial Turn the mode selector dial to select airflow mode (page 6-4). NOTE The mode selector dial can be set at the intermediate positions ( mode. Set the dial to a intermediate position if you want to slightly adjust the airflow amount.
• Page 170
  Interior Comfort Climate Control System WARNING Do not use the recirculated air mode in cold or rainy weather: Using the recirculated air mode in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
• Page 171
  qVentilation 1. Set the mode selector dial to the position. 2. Set the air intake selector to the outside air mode. 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed.

• Page 172: Fully Automatic Type

  Interior Comfort Climate Control System Climate control information is displayed on the information display. Without rear ventilation system Fan control dial OFF switch With rear ventilation system Auto switch OFF switch í 6-10 Some models. Fully Automatic Type Mode selector switch Windshield defroster switch Air intake selector A/C switch…

• Page 173
  qControl Switches AUTO switch Without rear ventilation system With rear ventilation system By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature: Airflow temperature Amount of airflow Selection of airflow mode Outside/Recirculated air selection Air conditioner operation Climate Control System NOTE…
• Page 174
  Interior Comfort Climate Control System Temperature control dial Without rear ventilation system Cold With rear ventilation system Cold This dial controls temperature.Turn it clockwise for hot and counterclockwise for cold. Fan control dial Without rear ventilation system Slow 6-12 With rear ventilation system The fan has seven speeds.
• Page 175
  A/C switch Without rear ventilation system With rear ventilation system With the AUTO or fan control dial ON, press the A/C switch to select the air conditioning (cooling/dehumidifying functions) on or off. NOTE The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).
• Page 176
  Interior Comfort Climate Control System NOTE The displayed ambient temperature may vary from the actual ambient temperature depending on the surrounding area and vehicle conditions. Press the AMB switch 2 seconds or more to switch the display from Fahrenheit to Centigrade or vice versa.
• Page 177
  NOTE Setting the temperature to maximum high or low will not provide the desired temperature at a faster rate. When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents. qWindshield Defrosting and Defogging Press the windshield defroster switch.

• Page 178: Rear Ventilation System

  Interior Comfort Climate Control System Rear Ventilation System The rear ventilation system operates in conjunction with the front climate control system. Front climate control is given priority over the rear ventilation control. Knob qControl Switches Rear ventilation control switch To get air flowing through the rear vents, first operate the fan control dial or turn on the AUTO switch on the front climate control operation panel.

• Page 179: Audio System

  Antenna qDetachable Type To remove the antenna, turn it counterclockwise. To install the antenna, turn it clockwise. Make sure the antenna is securely installed. Install Remove CAUTION Ø To prevent damage to the antenna, remove it before entering a car wash facility or passing beneath a low overhead clearance.

• Page 180
  Interior Comfort Audio System qRadio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time.
• Page 181
  Flutter/Skip noise Signals from an FM transmitter move in straight lines and become weak in valleys between tall buildings, mountains, and other obstacles. When a vehicle passes through such an area, the reception conditions may change suddenly, resulting in annoying noise. Weak signal noise In suburban areas, broadcast signals become weak because of distance from…
• Page 182
  Interior Comfort Audio System qOperating Tips for CD Player/In- Dash CD Changer Condensation phenomenon Immediately after turning on the heater when the vehicle is cold, the CD or optical components (prism and lens) in the CD player/In-dash CD changer may become clouded with condensation.
• Page 183
  A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/In-dash CD changer will not play the CD. In addition, the disc may not eject resulting in a malfunction.
• Page 184
  Interior Comfort Audio System Do not use record sprays, antistatic agents, or household spray cleaners. Volatile chemicals such as benzine and thinner can also damage the surface of the CD and must not be used. Anything that can damage, warp, or fog plastic should never be used to clean CDs.

• Page 185: Audio Set

  Interior Comfort Audio System Audio Set Audio information is displayed on the information display. CD Player (non-MP3 compatible) In-Dash CD Changer (non-MP3 compatible) Illustration is of a representative audio unit. Power/Volume/Sound Controls … page 6-24 Operating the Radio … page 6-28 Operating the Compact Disc (CD) Player …

• Page 186
  Interior Comfort Audio System qPower/Volume/Sound Controls Power/Volume dial Power ON/OFF Turn the ignition switch to the ACC or ON position. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off. NOTE To prevent the battery from being discharged, do not leave the audio system on for a long…
• Page 187
  2. Turn the audio control dial to adjust the selected functions as follows: Indication Turn Left Turn Right Decrease bass Decrease treble Shift the sound to the front Shift the sound to the left NOTE About 5 seconds after selecting any mode, the volume function will be automatically selected.
• Page 188
  Interior Comfort Audio System In-Dash CD Changer type The following eight modes are available. Select the desired mode according to use. Mode Turn the audio control dial to select ALC OFF or ALC LEVEL1 7 modes. The selected mode will be indicated. 6-26 BEEP setting The beep-sound when operating the audio…
• Page 189
  MEMO 6-27…
• Page 190
  Interior Comfort Audio System qOperating the Radio Band selector button Channel preset buttons Scan button Radio ON Press a band selector button ( turn the radio on. Band selection Successively pressing the band selector button ( ) switches the bands as follows: FM1→FM2→AM.
• Page 191
  NOTE If you continue to press and hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( automatically sample strong stations. Scanning stops at each station for about 5 seconds. To hold a station, press the scan button ( ) again during this interval.
• Page 192
  Interior Comfort Audio System — Mailing Address: Sirius Satellite Radio 1221 Avenue Of The Americas New York, NY 10020 Attention: Customer Care Include your Sirius Radio ESN (Electronic Serial Number) when subscribing or requesting technical assistance. See the Satellite Radio Kit manual accompanying the SIRIUS unit for complete satellite radio activation procedures and information on how to…
• Page 193
  MEMO 6-31…
• Page 194
  Interior Comfort Audio System qOperating the Compact Disc (CD) Player Load button CD slot Repeat button Scan button Random button Type Playable data Music CD player · Music data (CD-DA) (non-MP3 compatible) Inserting the CD Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play.
• Page 195
  CD malfunction. Check the CD for damage, dirt, or smudges, and then properly reinsert. If the message appears again, take the unit to an Authorized Mazda Dealer for service. ) during ) again to ) during…
• Page 196
  Interior Comfort Audio System qOperating the In-Dash CD Changer Load button Channel preset buttons Disc down button Disc up button Scan button Type Playable data Music CD player ·Music data (CD-DA) (non-MP3 compatible) Inserting the CD The CD must be label-side up when inserting.
• Page 197
  2. Press the channel preset button for the desired tray number while WAIT is displayed. 3. When IN is displayed, insert the CD. NOTE The CD cannot be inserted to the desired tray number if the number is already occupied. Multiple insertion 1.
• Page 198
  CD for damage, dirt, or smudges, and then properly reinsert. If the message appears again, take the unit to an Authorized Mazda Dealer for service. qOperating the Auxiliary jack You can connect portable audio units or similar products on the market to the…
• Page 199
  Indications If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. Indication CD is inserted upside down CHECK CD…

• Page 200: Audio Control Switch Operation (Steering Wheel) Í

  í NOTE The Voice recognition/hands-free switch is operable with the audio unit turned off. Mazda has installed this system to prevent distraction while driving the vehicle and using audio controls on the dashboard. Always make safe driving your first priority.

• Page 201
  qChanging the Source Press the mode switch ( the audio source (FM1 radio> FM2 radio> AM radio> CD player or CD changer> SIRIUS1> SIRIUS2> SIRIUS3> AUX> cyclical). NOTE CD, CD changer, and SIRIUS digital satellite radio modes cannot be selected in the following cases: ·…

• Page 202: Aux Mode (Auxiliary Input)

  Interior Comfort Audio System 6-40 AUX Mode (Auxiliary input) You can connect portable audio units or similar products on the market to the auxiliary jack to listen to music or audio over the vehicle’s speakers. To use the auxiliary jack, pull up its cover. Type A Type B…

• Page 203
  WARNING Do not adjust the portable audio unit or a similar product while driving the vehicle: Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident.
• Page 204
  Interior Comfort Audio System 3. Press the source change button ) of the audio unit or the mode switch ( ) of the audio control switch to change to the AUX mode. Audio Unit Steering Switch NOTE Set the volume of the portable audio unit to the maximum within the range that the sound does not become distorted, then adjust the volume using the power/volume…

• Page 205: Safety Certification

  Ø This CD player should not be adjusted or repaired by anyone except qualified service personnel. If servicing is required, contact an Authorized Mazda Dealer. Ø Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser exposure. Never operate the CD player with the top case of the unit removed.

• Page 206: Bluetooth Hands-Free

  The types of mobile phones which can be connected to the hands-free unit are limited, so before purchasing or changing your mobile phone model, consult an Authorized Mazda Dealer. Mobile phones which can be connected to the hands-free system need to be compliant with Bluetooth…

• Page 207
  NOTE If the ignition switch is turned off during a hands-free call, the line is transferred to the mobile telephone automatically. If the mobile telephone is in a location where radio reception is difficult such as a metal container or in the trunk, the call may not be connected using Bluetooth.
• Page 208
  Interior Comfort Bluetooth Hands-Free Audio unit/Navigation system The audio unit or navigation system is used for adjusting the volume. If Bluetooth Hands-Free is operated, information such as mobile phone signal strength of Bluetooth Hands-Free are displayed on the screen. (With navigation system) Bluetooth Hands-Free information qVoice…
• Page 209
  qFunction restrictions while using Bluetooth Hands-Free Functions are limited as follows while Bluetooth Hands-Free is being used. Beep sound and voice guidance related to the audio unit and navigation system are not heard. Beep sound related to the A/C operation is not heard. The navigation system’s voice recognition command does not function.

• Page 210: Basic Bluetooth Hands-Free Operation

  Interior Comfort Bluetooth Hands-Free Basic Bluetooth Hands- Free Operation qBluetooth Hands-Free preparation Language setting English, Spanish, and Canadian French are available. If the language setting is changed, all of the voice guidance and voice input commands are done in the selected language.

• Page 211
  (Peripheral device). NOTE For the operation of the mobile telephone, refer to its instruction manual. 15. Select Mazda from the device list searched by the mobile phone. 16. Input the 4-digit pairing code set in Step 9 to the mobile telephone.
• Page 212
  Interior Comfort Bluetooth Hands-Free 22. Say: [Beep] 1 (Call out a number of the desired priority from 1 to 7.) NOTE Normally, “1” is to be input (Highest priority). If more than two mobile telephones are registered, input the priority order from 1 to 23.

• Page 213: Convenient Use Of The Hands-Free System

  NOTE The volume can also be adjusted using the volume button on the steering wheel. The music volume of the audio unit and the navigation system cannot be adjusted while Bluetooth Hands-Free is being used. qHelp function use The help function informs the user of all the available voice commands under the current conditions.

• Page 214
  Interior Comfort Bluetooth Hands-Free 15. Prompt: XXXXXXXXXXX (Ex. 555-1234 ) (Phone number registration). Is this correct? 16. Say: [Beep] Yes 17. Prompt: Number saved. Would you like to add another number for this entry? 18. Say: [Beep] Yes or No . 19.
• Page 215
  qMute The microphone can be muted during a call. 1. Press the voice recognition/hands-free switch (Short press). 2. Say: [Beep] Mute 3. Prompt: Microphone muted Canceling mute 1. Press the voice recognition/hands-free switch (Short press). 2. Say: [Beep] Mute off 3.
• Page 216
  Interior Comfort Bluetooth Hands-Free 2. Say: [Beep] Phone book 3. Prompt: Select one of the following: new entry, edit, list names, delete or erase all…, or say cancel to return to main menu. 4. Say: [Beep] Edit 5. Prompt: Please say the name of the entry you would like to edit, or say List names …, or say cancel to return to main menu.
• Page 217
  Complete deletion of the phone book data All data registered to the Bluetooth Hands-Free phone book can be erased. 1. Activate the Bluetooth Hands-Free (page 6-47). 2. Say: [Beep] Phone book 3. Prompt: Select one of the following: new entry, edit, list names, delete or erase all…, or say cancel to return to main menu.

• Page 218: Hands-Free Telephone Setting

  Interior Comfort Bluetooth Hands-Free Hands-Free Telephone Setting qMobile phone Mobile phone registration For the registration of a Bluetooth equipped mobile telephone to Bluetooth Hands-Free, refer to Bluetooth Hands- Free preparation (page 6-48). Registered mobile phone read-out Bluetooth Hands-Free can read-out the mobile phones registered to its system.

• Page 219
  9. Prompt: XXXXX… (Ex. phone B…) (Phone tag) will temporarily override phone priorities, returning to main menu. Registered mobile phone deletion Registered mobile phones can be deleted individually or collectively. 1. Activate the Bluetooth Hands-Free (page 6-47). 2. Say: [Beep] Setup 3.
• Page 220
  Interior Comfort Bluetooth Hands-Free 3. Say: [Beep] XXXX (Say the set passcode PCode .) 4. If the correct passcode is input, voice guidance XXXXXX… (Ex. Mary’s phone) (Phone tag) is connected is announced. If the passcode is incorrect, voice guidance XXXX (4-digit passcode, Pcode) incorrect passcode, please try again is announced.
• Page 221
  qVoice recognition learning function (Speaker enrollment) The voice recognition learning function enables voice recognition appropriate to the characteristics of the user’s voice. If the recognition of the voice input commands to the system is not adequate, this function can largely improve the system’s voice recognition of the user.

• Page 222: When Bluetooth Hands-Free Cannot Be Used

  Interior Comfort Bluetooth Hands-Free qDTMF (dual tone multi- frequency signal) transmission This function is used when transmitting DTMF via the user’s voice. The receiver of a DTMF transmission is generally a home telephone answering machine or a company’s automated guidance call center (When you send tone signals back according to the voice guidance recording).

• Page 223: Safety Certification

  Safety Certification FCC ID: CB2MBLUEC07 IC:279B- MBLUEC07 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired…

• Page 224: Interior Equipment

  Interior Comfort Interior Equipment Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sunvisor qVanity Mirrors To use the vanity mirror, lower the sunvisor. 6-62 Interior Lights qIlluminated Entry System When the illuminated entry system operates, the overhead light (switch is in the DOOR position) turns on for: About 30 seconds after the driver’s…

• Page 225
  qOverhead Lights Front Switch Front Overhead Lights Position Light off Light is on when any door is open Light is on or off when the illuminated entry system is on Rear Switch Rear Overhead Lights Position Light off Light is on when any door is open Light is on or off when the illuminated entry system is on Light on…

• Page 226: Information Display

  Interior Comfort Interior Equipment Clock 6-64 Information Display Audio display Climate control display/ Ambient temperature display…

• Page 227
  qInformation Display Functions The information display has the following functions: Clock Ambient Temperature Display (Outside Temperature Display, Fully Automatic Type) Climate Control Display (Fully Automatic Type) Audio Display qClock When the ignition switch is in the ACC or ON position, the time is displayed. Time setting 1.
• Page 228
  Interior Comfort Interior Equipment qAmbient Temperature Display (Fully Automatic Type) When the ignition switch is in the ON position, press the AMB switch (page 6-10) to display the ambient temperature. NOTE Under the following conditions, the ambient temperature display may differ from the actual ambient temperature depending on the surroundings and vehicle conditions: Significantly cold or hot temperatures.

• Page 229: Cup Holder

  Cup Holder WARNING Never use a cup holder to hold hot liquids while the vehicle is moving: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Do not put anything other than cups or drink cans in cup holders: Putting objects other than cups or…

• Page 230
  Interior Comfort Interior Equipment í qRear Second-row Seat Storage box (Second-row right-side seat) To use, pull out the storage box (page 6-71). Top of the center console í 6-68 Some models. Inside of the center console To use the cup holder, open the cover. Third-row seat Two cup holders are in the side-trim on both the left and right sides.

• Page 231: Bottle Holder

  Bottle Holder Bottle holders are on the inside of the doors. Bottle holder CAUTION Do not use the bottle holders for containers without caps. The contents may spill when the door is opened or closed. Interior Equipment Storage Compartments WARNING Keep storage boxes closed when driving: Driving with the storage boxes open…

• Page 232
  Interior Comfort Interior Equipment qCenter Console To open, pull the left release latch. Type A Type B Small items can be placed in the tray of the center console lid. To open it, pull the right release latch. 6-70 qUnderseat Storage If your vehicle has a right second-row storage box (page 6-71), when using the storage box, small items can be stored…
• Page 233
  CAUTION Do not store items above the marked line indicated in the illustration below. If the items are stored above the marked line, the seat bottom will not lock and could cause serious injury. Marked line To return the seat bottom Carefully lower the seat bottom backward until it locks in place.
• Page 234
  Interior Comfort Interior Equipment To use the storage box 1. Pull the strap and lift the seat bottom up and forward. NOTE If it is hard to lift the seat bottom, raise the reclining lever and lean back slightly. 2. Pull out the storage box. 6-72 3.
• Page 235
  CAUTION When returning the seat-bottom to its upright position, make sure there is no object lodged between the seatback and the seat belt buckle. If the seat-bottom is returned to its upright position in this condition it could damage the seat belt buckle. If the seat belt buckle does not return to its position after removing the obstruction, move the buckle…

• Page 236: Accessory Sockets

  6-74 Accessory Sockets The ignition switch must be in the ACC or ON position Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A). Front (Type A) Front (Type B)

• Page 237
  Ø Do not use accessories that require more than 120 W (DC 12 V, 10 A). Ø Do not use accessories that are not genuine Mazda accessories or the equivalent. Ø Close the cover when the accessory socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.
• Page 238
  6-76…

• Page 239: In Case Of An Emergency

  In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency … 7-2 Parking in an Emergency … 7-2 Flat Tire … 7-3 Spare Tire and Tool Storage … 7-3 Changing a Flat Tire … 7-7 Overheating …

• Page 240: Parking In An Emergency

  In Case of an Emergency Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

• Page 241: Flat Tire

  In Case of an Emergency Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Jack lever Tiedown eyelet Lug wrench Spare tire Flat tire belt storage bag Jack…

• Page 242
  In Case of an Emergency Flat Tire qJack To remove the jack 1. Remove the cover. 2. Turn the wing bolt and jack screw counterclockwise. Wing bolt Jack screw To secure the jack 1. Insert the wing bolt into the jack with the jack screw pointing down and turn the wing bolt clockwise to temporarily tighten it.
• Page 243
  Ø Do not use your temporary spare tire on any other vehicle; it has been designed only for your Mazda. Ø Use only one temporary spare tire on your vehicle at the same time. NOTE…
• Page 244
  In Case of an Emergency Flat Tire 2. Open and fold back the trunk board over the third-row seatback. Trunk board Cargo sub- compartment 3. Remove the cargo sub-compartment. 4. Turn the tire hold-down bolt counterclockwise with the lug wrench. To secure the spare tire Perform the removal procedure in reverse.

• Page 245: Changing A Flat Tire

  CAUTION (With Tire Pressure Monitoring System) The wheels equipped on your Mazda are specially designed for installation of the tire pressure sensors. Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors.

• Page 246
  Use only the front and rear jacking positions recommended in this manual. Using a jack that is not designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone. Jacking the vehicle with an object under the jack is dangerous.
• Page 247
  Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot slip or move. 5. Remove the lug nuts by turning them counterclockwise;…
• Page 248
  In Case of an Emergency Flat Tire To install the nut 1. Place the key on top of the nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut.
• Page 249
  Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident.
• Page 250
  In Case of an Emergency Flat Tire 11. Pull the belt end to secure the flat tire. 12. Remove the tire blocks and store the tools and jack. 13. Check the tire inflation pressure. Refer to the specification charts on page 10-6.

• Page 251: Overheating

  If the cooling fan does not operate while the engine is running, the engine temperature will increase. Stop the engine and call an Authorized Mazda Dealer. 6. Make sure the cooling fan is operating, then turn off the engine after the temperature has decreased.

• Page 252
  Carefully add coolant as required (page 8-20). CAUTION If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. Consult an Authorized Mazda Dealer. 7-14…

• Page 253: Emergency Starting

  4. If the engine fails to start, crank it without depressing the accelerator for up to ten seconds. If the engine still does not start using the above procedure, have your vehicle inspected by an Authorized Mazda Dealer. In Case of an Emergency Emergency Starting 7-15…

• Page 254: Jump-Starting

  In Case of an Emergency Emergency Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. WARNING Follow These Precautions Carefully: To ensure safe and correct handling of the battery, read the following precautions carefully before using the battery or inspecting it.

• Page 255
  Keep all flames, including cigarettes, and sparks away from open battery cells: Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Do not jump-start a frozen battery or one with a low fluid level: Jump-starting a frozen battery or one with a low fluid level is dangerous.
• Page 256
  In Case of an Emergency Emergency Starting 1. For vehicles equipped with an engine cover, remove the engine cover. 2. Remove the battery cover from its front side. 3. Make sure the booster battery is 12 V and that its negative terminal is grounded.

• Page 257: Push-Starting

  Push-Starting Do not push-start your Mazda. WARNING Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured.

• Page 258: Emergency Towing

  In Case of an Emergency Emergency Towing Towing Description We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed.

• Page 259: Tiedown Hooks

  CAUTION Follow these instructions when towing the vehicle with all wheels on the ground. 1. Shift to neutral (MT), or the N position (AT). 2. Turn the ignition switch to the ACC position to prevent the steering from locking up. 3.

• Page 260
  In Case of an Emergency Emergency Towing 3. Securely install the tiedown eyelet using the lug wrench. Lug wrench 4. Hook the tying rope to the tiedown eyelet. CAUTION If the tiedown eyelet is not securely tightened, it may loosen or disengage from the bumper when tying down the vehicle.

• Page 261: Recreational Towing

  Recreational Towing An example of recreational towing is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 wheels. When doing recreational towing refer to Towing Description (page 7-20) and Tiedown Hook (page 7-21) and carefully follow the instructions.

• Page 262
  7-24…

• Page 263: Maintenance And Care

  Maintenance and Care How to keep your Mazda in top condition. Introduction … 8-2 Introduction … 8-2 Scheduled Maintenance … 8-3 Scheduled Maintenance (USA, Canada, and Puerto Rico) … 8-3 Scheduled Maintenance (Mexico) … 8-8 Owner Maintenance … 8-15 Owner Maintenance Schedule … 8-15 Owner Maintenance Precautions …

• Page 264: Introduction

  Claims against the warranty resulting from lack of maintenance, as opposed to defective materials or authorized Mazda workmanship, will not be honored. Any auto repair shop using parts equivalent to your Mazda’s original equipment may perform maintenance. But we recommend that it always be done by an Authorized…

• Page 265: Scheduled Maintenance

  Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. Repeated short-distance driving Driving in dusty conditions Driving with extended use of brakes Driving in areas where salt or other corrosive materials are being used Driving on rough or muddy roads Extended periods of idling or low-speed operation Driving for long periods in cold temperatures or extremely humid climates…

• Page 266
  Maintenance and Care Scheduled Maintenance qSchedule 1 Maintenance Interval ENGINE Engine valve clearance Drive belts Engine oil Engine oil filter COOLING SYSTEM Engine coolant FUEL SYSTEM Air filter Fuel lines and hoses Hoses and tubes for emission IGNITION SYSTEM Spark plugs CHASSIS and BODY Brake lines, hoses and connections Disc brakes…
• Page 267
  *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
• Page 268
  Maintenance and Care Scheduled Maintenance qSchedule 2 Months Maintenance Interval ×1000 km ×1000 miles ENGINE Engine valve clearance Drive belts Puerto Rico Engine oil Others Engine oil filter COOLING SYSTEM FL22 type Engine coolant Others Engine coolant level FUEL SYSTEM Puerto Rico Air filter…
• Page 269
  *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.

• Page 270: Scheduled Maintenance (Mexico)

  Maintenance and Care Scheduled Maintenance Scheduled Maintenance (Mexico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. Repeated short-distance driving Driving in dusty conditions Driving with extended use of brakes Driving in areas where salt or other corrosive materials are being used Driving on rough or muddy roads Extended periods of idling or low-speed operation Driving for long periods in cold temperatures or extremely humid climates…

• Page 271
  qSchedule 1 Maintenance Interval Months ×1000 km ENGINE Engine valve clearance Drive belts Engine oil Engine oil filter COOLING SYSTEM Cooling system FL22 type Engine coolant Others FUEL SYSTEM Air filter Fuel lines and hoses Hoses and tubes for emission Fuel filter IGNITION SYSTEM Spark plugs…
• Page 272
  *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.
• Page 273
  qSchedule 2 Maintenance Interval Months ×1000 km ENGINE Engine valve clearance Drive belts Engine oil Engine oil filter COOLING SYSTEM Cooling system FL22 type Engine coolant Others Engine coolant level FUEL SYSTEM Air filter Fuel lines and hoses Hoses and tubes for emission Fuel filter IGNITION SYSTEM Spark plugs…
• Page 274
  *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.
• Page 275
  (Cont.) Maintenance Interval Months ×1000 km ENGINE Engine valve clearance Drive belts Engine oil Engine oil filter COOLING SYSTEM Cooling system FL22 type Engine coolant Others Engine coolant level FUEL SYSTEM Air filter Fuel lines and hoses Hoses and tubes for emission Fuel filter IGNITION SYSTEM Spark plugs…
• Page 276
  *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or kilometer period to ensure long-term reliability.

• Page 277: Owner Maintenance

  The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.

• Page 278: Owner Maintenance Precautions

  Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Mazda Warranty statement provided with the vehicle. If you’re unsure about any servicing or maintenance procedure, have it done by an Authorized Mazda Dealer.

• Page 279: Engine Compartment Overview

  Engine Compartment Overview Engine coolant reservoir Power steering Engine oil-filler cap fluid reservoir Windshield washer fluid reservoir Cooling System Cap Engine oil dipstick Automatic transaxle fluid-level dipstick (only for automatic transaxle) Maintenance and Care Owner Maintenance Brake/Clutch fluid Battery reservoir Fuse block 8-17…

• Page 280: Engine Oil

  Maintenance and Care Owner Maintenance Engine Oil NOTE Changing the engine oil should be done by an Authorized Mazda Dealer. qRecommended Oil Use SAE 5W-20 engine oil. Oil container labels provide important information. A chief contribution this type of oil makes…

• Page 281
  The quality designation SM, or ILSAC must be on the label. –10 –30 –20 –20 5W-20 qInspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan.

• Page 282: Engine Coolant

  NOTE Changing the coolant should be done by an Authorized Mazda Dealer. 8-20 Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year at the beginning of the…

• Page 283
  (page 8-3). If the coolant reservoir is empty or new coolant is required frequently, consult an Authorized Mazda Dealer. 8-21…

• Page 284: Brake/Clutch Fluid

  Ø Using nonspecified brake and clutch fluids (page 10-4) will damage the systems. Mixing different fluids will also damage them. If the brake/clutch system frequently requires new fluid, consult an Authorized Mazda Dealer.

• Page 285: Power Steering Fluid

  The level must be kept between MIN and MAX. Visually examine the lines and hoses for leaks and damage. If new fluid is required frequently, consult an Authorized Mazda Dealer. Maintenance and Care Owner Maintenance Automatic transaxle Fluid (ATF) qInspecting Automatic transaxle…

• Page 286
  Maintenance and Care Owner Maintenance CAUTION Do not shift the shift lever while the engine is warming up. If the ATF level is extremely low, the automatic transaxle could be damaged. 4. While the engine is still idling, pull out the dipstick and wipe it clean, and then put it back.

• Page 287: Washer Fluid

  Washer Fluid qInspecting Washer Fluid Level WARNING Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.

• Page 288: Body Lubrication

  Be careful not to pinch hands or fingers as it may cause injury, or damage the wipers. When washing or servicing your Mazda, make sure the wiper lever is in the OFF position. Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness.

• Page 289
  qReplacing Windshield Wiper Blades When the wipers no longer clean well, the blades are probably worn or cracked. Replace them. CAUTION To prevent damage to the wiper arms and other components, don’t try to sweep the wiper arm by hand. NOTE To prevent damage to the wiper arm blades when raising both the driver and passenger…
• Page 290
  Maintenance and Care Owner Maintenance CAUTION Ø Don’t bend or discard the stiffeners. You need to use them again. Ø If the metal stiffeners are switched, the blade’s wiping efficiency could be reduced. So don’t use the driver’s side metal stiffeners on the passenger’s side, or vice versa.
• Page 291
  3. Remove the metal stiffeners from each blade rubber and install them in the new blade. CAUTION Don’t bend or discard the stiffeners. You need to use them again. 4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse order of removal.

• Page 292: Battery

  Maintenance and Care Owner Maintenance WARNING Read the following precautions carefully before using the battery or inspecting to ensure safe and correct handling: Always wear eye protection when working near the battery: Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID which could cause blindness if splashed into your eyes.

• Page 293
  NOTE Remove the battery cover before performing battery maintenance. qBattery Maintenance To get the best service from a battery: Keep it securely mounted. Keep the top clean and dry. Keep terminals and connections clean, tight, and coated with petroleum jelly or terminal grease.

• Page 294: Tires

  (radial, bias-belted, bias-type) on all four wheels. Using Wrong-Sized Tires: Using any other tire size than what is specified for your Mazda (page 10-6) is dangerous. It could seriously affect ride, handling, ground clearance, tire clearance, and speedometer calibration.

• Page 295
  Reduced braking, steering, and traction could result in an accident. CAUTION (With Tire Pressure Monitoring System) When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged. 8-33…
• Page 296
  Maintenance and Care Owner Maintenance NOTE (With Tire Pressure Monitoring System) When tires with steel wire reinforcement in the sidewalls are used, the system may not function correctly even with a genuine wheel. Refer to System Error Activation on page 5-26.
• Page 297
  Ø (With Tire Pressure Monitoring System) Ø When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged. Ø The wheels equipped on your Mazda are specially designed for installation of the tire pressure sensors.

• Page 298: Light Bulbs

  Maintenance and Care Owner Maintenance LED type High-mount brake light Rear turn signal lights Brake lights/ Taillight License plate lights Headlights Fog lights 8-36 Light Bulbs Overhead light (Rear) Luggage compartment light Reverse lights Overhead light/Map lights (Front) Side turn signal lights Front turn signal lights/Side-marker Bulb type Rear turn signal lights…

• Page 299
  Consult an Authorized Mazda Dealer when the replacement is necessary. Never touch the glass portion of a halogen bulb with your bare hands and…
• Page 300
  (Xenon fusion bulb) You cannot replace the low beam bulbs by yourself. The bulbs must be replaced at an Authorized Mazda Dealer. (Halogen bulb) 1. Disconnect the electrical connector from the bulb by pulling it to the rear. 2. Pull off the sealing cover.
• Page 301
  NOTE If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. When reinstalling the sealing cover, make sure faces up.
• Page 302
  Maintenance and Care Owner Maintenance Front turn signal lights/Front side- marker lights 1. Turn the center section of the plastic retainers counterclockwise and remove them, then partially peel back the mudguard. Removal Installation 2. Turn the socket and bulb assembly counterclockwise and remove it.
• Page 303
  5. Install the new bulb in the reverse order of removal. High-mount brake light Due to the complexity and difficulty of the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer. Maintenance and Care Owner Maintenance License plate lights 1. Remove the liftgate cover.
• Page 304
  Maintenance and Care Owner Maintenance qReplacing Interior Light Bulbs Overhead light/Map lights (Front) 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim and gently insert it in the overhead light as shown in the figure, and then remove the overhead light unit.

• Page 305: Fuses

  If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible. qFuse Replacement Replacing the fuses on the passenger’s side…

• Page 306
  If it does not fit tightly, have an expert install it. We recommend an Authorized Mazda Dealer. If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the MIRROR or CIGAR circuit.
• Page 307
  WARNING Do not replace the main fuse by yourself. Have an Authorized Mazda Dealer perform the replacement: Replacing the fuse by yourself is dangerous because the MAIN fuse is a high current fuse. Incorrect replacement could cause an electrical shock or a short circuit resulting in a fire.
• Page 308
  Maintenance and Care Owner Maintenance qFuse Panel Description Fuse block (Engine compartment) DESCRIPTION P.WIND R.BLOWER IG KEY1 INJ IG KEY2 ABS-V ABS-P IG KEY2 IG KEY1 HEATER DEICER TCM BLOWER F.BLOWER GLOW IG KEY1 F.BLOWER IG KEY2 8-46 FUSE PROTECTED COMPONENT RATING 30 A Cooling fan…
• Page 309
  DESCRIPTION CLOSER P.SLIDE LH CLOSER P.SLIDE RH EHPAS D.LOCK P.WIND H/CLEAN DEFOG ENG+B STOP FUEL HAZARD ROOM GLOW SIG HEAD HR HEAD HL HORN SUN ROOF MIRROR BURGLAR HEAD LR HEAD LL ENG BAR2 ENG BAR INJ ENG BA ILLUMI TAIL *1 Without rear ventilation system *2 With rear ventilation system…
• Page 310
  Maintenance and Care Owner Maintenance Fuse block (Passenger’s side) DESCRIPTION M.DEF ENG3 P.OUTLET SHIFT/L CIGAR MIRROR F.WIP R.WIP METER S.WARM ABS/DSC EHPAS ENG2 í 8-48 Some models. FUSE PROTECTED COMPONENT RATING í 7.5 A Mirror defroster 20 A Ignition switch 15 A Accessory Socket í…

• Page 311: Appearance Care

  Prevention It is necessary to have your Mazda washed and waxed to preserve its finish according to the instructions in this section. This should be done as soon as possible.

• Page 312
  This increases the chance of paint chipping. Chipped paint can lead to rust forming on your Mazda. Before this happens, repair the damage by using Mazda touch-up paint according to the instructions in this section. Failure to repair the affected area could lead to serious rusting and expensive repairs.

• Page 313: Exterior Care

  Be careful not to pinch hands or fingers as it may cause injury, or damage the wipers. When washing or servicing your Mazda, make sure the wiper lever is in the OFF position. To help protect the finish from rust and…

• Page 314
  Maintenance and Care Appearance Care CAUTION Ø Don’t use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may damage the protective coating; also, cleaners and detergents may discolor or deteriorate the paint.
• Page 315
  Exposed metal quickly rusts and can lead to major repairs. CAUTION If your Mazda is damaged and needs metal parts repaired or replaced, make sure the body shop applies anti-corrosion materials to all parts, both repaired and new. This will prevent them from rusting.

• Page 316: Interior Care

  Maintenance and Care Appearance Care qAluminum Wheel Maintenance A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating. NOTE Don’t use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminum wheels.

• Page 317
  After cleaning the belts, thoroughly dry the belt webbing and make sure there is no remaining moisture before retracting them. WARNING Have an Authorized Mazda Dealer replace damaged seat belts immediately: Using damaged seat belts is dangerous. In a collision, damaged belts cannot provide adequate protection.
• Page 318
  8-56…

• Page 319: Customer Information

  Mazda Importer/Distributors … 9-11 Importer/Distributor … 9-11 Distributor in Each Area … 9-11 Warranty … 9-13 Warranties for Your Mazda … 9-13 Outside the United States … 9-14 Outside Canada … 9-15 Registering Your Vehicle in A Foreign Country (Except United States and Canada) …

• Page 320: Customer Assistance

  Authorized Mazda Dealer. qSTEP 1: Contact Your Mazda Dealer Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.

• Page 321: Customer Assistance (Canada)

  Mazda North American Operations realizes that mutual agreement on some issues may not be possible. As a final step to ensure that your concerns are being fairly considered, Mazda North American Operations has agreed to participate in a dispute settlement program administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.

• Page 322: Customer Assistance (Puerto Rico)

  Being truly committed to customer satisfaction is more than a phrase with Mazda. We hope to satisfy every customer directly, but if there is ever a question about our decision, Mazda believes in providing a fast, fair and free method such as the BBB AUTO LINE to ensure…

• Page 323: Customer Assistance (Mexico)

  Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer.

• Page 324
  If a specific item of concern arises, where a solution cannot be reached between an owner, Mazda, and/or one of it’s dealers (that all parties cannot agree upon), the owner may wish to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
• Page 325
  Provincial Administrators may be reached locally as listed below: Province/Territory British Columbia & Yukon Territories Alberta & Northwest Territories Saskatchewan Atlantic Canada qRegional Offices REGIONAL OFFICES MAZDA CANADA INC. WESTERN REGION 8171 ACKROYD ROAD SUITE 2000 RICHMOND B.C. V6X 3K1 (604) 303-5670 MAZDA CANADA INC.
• Page 326
  1 Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.
• Page 327
  1: Contact Your Mazda Dealer Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS, SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of the dealership or the OWNER.
• Page 328
  Customer Information Customer Assistance In order to serve you efficiently and effectively, please help us by providing the following information: 1. Your name, address, and telephone number 2. Year and model of vehicle 3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper driver’s side corner of the dash) 4.
• Page 329
  55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800) 263-4680 (in Canada) (905) 787-7000 (outside Canada) qPUERTO RICO/U.S. Virgin Island Plaza Motors Corp. (Mazda de Puerto Rico) P.O. Box 362722, San Juan, Puerto Rico 00936-2722 TEL: (787) 641-9300…
• Page 330
  Customer Information Mazda Importer/Distributors Triple J Saipan, Inc. (d.b.a. Triple J Motors) P.O. Box 500487 Saipan, MP 96950-0487 TEL: (670) 234-7133/3051 qAMERICAN SAMOA Polynesia Motors, Inc. P.O. Box 1120, Pago Pago, American Samoa 96799 TEL: (684) 699-9347 9-12…
• Page 331
  Federal Emission Control Warranty (U.S.A. only) Emission Defect Warranty Emission Performance Warranty California Emission Control Warranty (U.S.A. only) Emission Control Warranty (Canada only) Replacement Parts and Accessories Limited Warranty Tire Warranty NOTE Detailed warranty information is provided with your Mazda. Customer Information Warranty 9-13…
• Page 332
  We strongly recommend that you NOT take your Mazda outside the United States. However, in the event that you are moving to Canada permanently, Mazda vehicles built for use in the United States could be eligible for exportation to Canada with specific vehicle modifications to comply with the Canadian Motor Vehicle Safety requirements (CMVSS).
• Page 333
  We strongly recommend that you NOT take your Mazda outside Canada. However, in the event that you are moving to the United States permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the United States with specific vehicle modifications to comply with the United States Federal Motor Vehicle Safety Standards (FMVSS).

• Page 334: Registering Your Vehicle In A Foreign

  Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable. There might not be an Authorized Mazda Dealer in the country you plan to take your vehicle. The Mazda warranty is valid only in certain countries.

• Page 335: Accessories

  Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or safety systems;…

• Page 336: Cell Phones

  Customer Information Cell Phones WARNING Please comply with the legal regulations concerning the use of communication equipment in vehicles in your country: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver’s hands.

• Page 337: Uniform Tire Quality Grading System

  Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance. qTread Wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.

• Page 338
  These grades will be added to the sidewalls of passenger vehicle tires over the next several years according to a schedule established by the NHTSA and the tire manufacturers. The grade of tires available as standard or optional equipment on Mazda vehicles may vary with respect to grade.

• Page 339: Tire Information (U.s.a.)

  Customer Information Tire Information (U.S.A.) Tire Labeling Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a tire identification number for safety standard certification and in case of a recall.

• Page 340
  Customer Information Tire Information (U.S.A.) 11. Tread wear, traction and temperature grades 12. Max. permissible inflation pressure 13. SAFETY WARNING P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating. Note that the tire size and load index rating may be different from the example.
• Page 341
  H is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating * For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
• Page 342
  Customer Information Tire Information (U.S.A.) Tread Wear, Traction and Temperature Grades Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.
• Page 343
  Customer Information Tire Information (U.S.A.) qInformation on Temporary Tires Please refer to the diagram below. 1. Temporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index&speed symbol T115/70D 16 90M is an example of a tire size and load index rating.
• Page 344
  Customer Information Tire Information (U.S.A.) 70 is the aspect ratio. This two-digit number indicates the tire’s ratio of height to width. D is the tire construction symbol. D indicates diagonal ply construction . 16 is the wheel rim diameter in inches. 90 is the Load Index.

• Page 345: Location Of The Tire Label

  Customer Information Tire Information (U.S.A.) Location of the Tire Label (Placard) You will find the tire label containing tire inflation pressure by tire size and other important information on the driver’s side B-pillar or on the edge of the driver’s door frame. SAMPLE qRecommended Tire Inflation Pressure On the tire label you will find the recommended tire inflation pressure in both kPa and psi…

• Page 346
  Customer Information Tire Information (U.S.A.) WARNING Always check the tire inflation pressures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner’s manual: Driving your vehicle with under-inflated tires is dangerous. Under-inflation is the most common cause of failures in any kind of tire and may result in severe cracking, tread separation or “blowout”, with unexpected loss of vehicle control and increased risk of injury.
• Page 347
  Customer Information Tire Information (U.S.A.) qGlossary of Terms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry. Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of manufacture.

• Page 348: Tire Maintenance

  Customer Information Tire Information (U.S.A.) Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are some important maintenance points: qTire Inflation Pressure Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain recommended pressures for the best ride, top handling, and minimum tire wear. Use the pressures specified on the vehicle tire information placard or tire label for optimum service.

• Page 349
  CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side. Tire performance will be weakened if rotated from side to side. (With limited-slip differential) Don’t use the following: Ø…
• Page 350
  Customer Information Tire Information (U.S.A.) qSafety Practices The way you drive has a great deal to do with your tire mileage and safety. So cultivate good driving habits for your own benefit. Observe posted speed limits Avoid fast starts, stops and turns Avoid potholes and objects on the road Do no run over curbs or hit the tire against the curb when parking CAUTION…

• Page 351: Vehicle Loading

  WARNING Do not taw a trailer with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could result in vehicle damage.

• Page 352
  Customer Information Tire Information (U.S.A.) Base Curb Weight is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment.
• Page 353
  Customer Information Tire Information (U.S.A.) SAMPLE CARGO Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. The cargo weight limit decreases depending on the number of vehicle occupants. The cargo weight limit can be calculated by subtracting the total weight of the vehicle occupants from the combination weight of occupants and cargo should never exceed value on the tire label.
• Page 354
  Customer Information Tire Information (U.S.A.) Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg (849 lbs) for the combination weight of occupants and cargo should never exceed : The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg (699 lbs) The cargo weight limit with two occupants is 385 kg (849 lbs) _ (68 ×…
• Page 355
  SAMPLE WARNING Exceeding Axle Weight Rating Limits: Exceeding the Safety Certification Label axle weight rating limits is dangerous and could result in death or serious injury as a result of substandard vehicle handling, performance, engine, transmission and/or structural damage, serious damage to the vehicle, or loss of control.
• Page 356
  Customer Information Tire Information (U.S.A.) GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle and the loaded trailer — including all cargo and passengers — that the vehicle can handle without risking damage.
• Page 357
  Customer Information Tire Information (U.S.A.) WARNING Exceeding GVWR or GAWR Specifications: Exceeding the GVWR or the GAWR specified on the certification label is dangerous. Exceeding any vehicle rating limitation could result in a serious accident, injury, or damage to the vehicle. Do not use replacement tires with lower load carrying capacities than the originals because they may lower the vehicle’s GVWR and GAWR limitations.

• Page 358: Steps For Determining The Correct Load Limit

  Customer Information Tire Information (U.S.A.) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit: (1) Locate the statement The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs on your vehicle’s placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.

• Page 359: Reporting Safety Defects

  7755 Irvine Center Drive Irvine, California 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 Customer Assistance Center or toll free at 1 (800) 222-5500 If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-11) in this booklet. 9-41…

• Page 360
  Customer Information Reporting Safety Defects Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5.

• Page 361: Service Publications

  Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below. If they don’t have what you need in stock, they can order it for you.

• Page 362
  Customer Information Service Publications qNAVIGATION SYSTEM OWNER’S MANUAL: This booklet contains information regarding the proper operation and use of the navigation system. This is not a technician’s manual. 9-44…
• Page 363
  Specifications Technical information about your Mazda. Identification Numbers … 10-2 Vehicle Information Labels … 10-2 Specifications … 10-4 Specifications … 10-4 10-1…

• Page 364: Identification Numbers

  Identification Numbers Vehicle Information Labels qVehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard. This plate can easily be seen through the windshield.

• Page 365
  Identification Numbers qEngine Number Forward 10-3…

• Page 366: Specifications

  Specifications qEngine Item Type Bore×Stroke Displacement Compression ratio qElectrical System Item Battery Spark-plug number Spark-plug gap *1 ex factory CAUTION When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged. qLubricant Quality Lubricant Engine oil…

• Page 367
  qCapacities (Approximate Quantities) Item With oil filter replacement Engine oil Without oil filter replacement Coolant Manual transaxle oil Automatic transaxle fluid Fuel tank Check oil and fluid levels with dipsticks or reservoir gauges. qDimensions Item Overall length Overall width Overall height Front tread Rear tread Wheelbase…
• Page 368
  NOTE The tires have been optimally matched with the chassis of your vehicle. When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer. í…
• Page 369
  Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation Pressure on page 8-32. Standard tire Tire size P205/55R16 89H 205/50R17 89V Temporary tire Tire size T125/70D16 qFuses Refer to the fuse rating on page 8-43. Inflation pressure Front 230 kPa (34 psi)
• Page 370
  10-8…

• Page 371: Index

  Index 11-1…

• Page 372
  Index Accessory Socket … 6-74 Add-On Non-Genuine Parts and Accessories … 9-17 Air Bag Systems … 2-39 Ambient Temperature Display … 6-66 Antenna … 6-17 Anti-Lock Brake System (ABS) … 5-7 Warning light … 5-8 Appearance Care … 8-49 Audio System … 6-17 Audio control switch …
• Page 373
  Child Safety Locks for Rear Doors … 3-10 Climate Control System … 6-2 Gas specifications … 10-5 Clock … 6-65 Cruise Control … 5-18 Cup Holder … 6-67 Customer Assistance … 9-2 Dashboard Illumination … 5-31 Daytime Running Lights … 5-47 Defroster Mirror …
• Page 374
  Index Glove Box … 6-69 Hazard Warning Flasher … 5-54 Hazardous Driving … 4-7 Headlights Control … 5-45 Flashing … 5-47 High-low beam … 5-47 Leveling … 5-47 On reminder … 5-47 Hood Release … 3-17 Horn … 5-54 Ignition Keys …
• Page 375
  Odometer and Trip Meter … 5-29 Outside Mirrors … 3-25 Overhead Lights … 6-63 Overheating … 7-13 Overloading … 4-10 Paint Damage … 8-49 Parking Brake … 5-6 Parking in an Emergency … 7-2 Power Door Locks … 3-8 Power Steering … 5-17 Fluid …
• Page 376
  Index Sunshade … 3-19 Sunvisors … 6-62 Tachometer … 5-30 Temporary Spare Tire … 8-34 Theft-Deterrent System … 3-22 Third-Row seat … 2-11 Tiedown Hook … 7-21 Tire Information … 9-21 Tire Pressure Monitoring System … 5-22 System error activation … 5-26 Tire pressure monitoring system warning light …