Мануал на тойоту ленд крузер 100

Quick Links

Part 1

OPERATION OF

INSTRUMENTS AND

CONTROLS—

Chapter 1- 1

Overview of instruments

and controls

_

_

_

Indicator

symbols

on

instrument panel

the

New L/C100(U)

1

• Page 1: Instruments And Controls

  New L/C100(U) Part 1 OPERATION OF INSTRUMENTS AND CONTROLS— Chapter 1- 1 Overview of instruments and controls Instrument panel overview Instrument cluster overview Indicator symbols instrument panel…

• Page 2: Instrument Panel Overview

  New L/C100(U) Instrument panel overview «View A 1. Side vents 2. Side defroster outlets 3. Instrument cluster 4. Center vents 5. Electric moon roof switches and/or personal lights 6. Glove box 7. Power door lock switches 8. Power window switches 9.

• Page 3
  New L/C100(U) «View B 1. Headlight, turn signal and front fog light switches 2. Cruise control switch 3. Ignition switch 4. Windshield wiper, rear window wiper and washer switches 5. Emergency flasher switch 6. Power antenna switch 7. Car audio 8.

• Page 4: Lower Part Of Center Cluster Panel

  New L/C100(U) «Lower part of center cluster panel 1. Ashtray 2. Cigarette lighter 3. Power outlet…

• Page 5: Instrument Cluster Overview

  New L/C100(U) Instrument cluster overview 1. Voltmeter 4. Tachometer 7. Odometer and two trip meters 2. Speedometer 5. Oil pressure gauge 8. Trip meter reset knob 3. Service reminder indicators and 6. Engine coolant temperature gauge 9. Fuel gauge indicator lights…

• Page 6: Indicator Symbols On Instrument Panel

  New L/C100(U) Indicator symbols on the instrument panel Brake system warning light Unengaged ”Park” warning light Automatic transmission fluid temperature warning Driver’s seat belt reminder light light Front passenger’s seat belt reminder light Turn signal indicator lights Discharge warning light Headlight high beam indicator light Malfunction indicator lamp Overdrive- off indicator light…

• Page 7
  New L/C100(U) Cruise control indicator light Automatic transmission indicator lights : For details, see ”Service reminder indicators and warning buzzers” in Chapter 1- 5. : If this light flashes, see ”Cruise control” in Chapter 1- 6.
• Page 8
  New L/C100(U)

• Page 9: Keys

  ”Side doors” in 1. Master key (black)—This key works in » Manual quarter windows this chapter. every lock. Your Toyota dealer will » need it to make you a new key with Power quarter windows built- in transponder chip.
• Page 10
  New L/C100(U) NOTICE z When starting the engine, do not z Do not bend the key grip. use the key with other transponder When using a key containing a trans- keys around (including keys of oth- ponder chip, observe the following er vehicles) and do not press other precautions: key plates against the key grip.
• Page 11
  If you should lose your keys or if you hicle. The engine will start, only when need additional keys, duplicates can be the electronic code in the chip corre- made by a Toyota dealer using the key sponds to the registered ID code for number. the vehicle.
• Page 12
  This device complies with Part 15 of the FCC Rules. Operation is subject to the For your Toyota dealer to make you a following two conditions: new key with built- in transponder chip, your dealer will need your key number (1) This device may not cause harmful and master key.
• Page 13
  New L/C100(U) Side doors— Driver’s side LOCKING AND UNLOCKING WITH KEY LOCKING UNLOCKING WITH INSIDE LOCK KNOB Insert the key into the keyhole and turn Move the lock knob. To lock: Turn the key forward. To lock: Push the knob forward. To unlock: Turn the key backward.
• Page 14
  New L/C100(U) LOCKING UNLOCKING WITH CAUTION POWER DOOR LOCK SWITCH Push the switch. Before driving, be sure that the doors To lock: Push the switch on the front side. closed locked, especially To unlock: Push the switch on the rear when small children are in the ve- side.
• Page 15
  New L/C100(U) —Wireless remote control Your vehicle has a wireless remote You have 30 seconds to open a door after control system that can lock or unlock using the wireless remote unlock feature. all the side doors and back door from a If a door is not opened by then, all the distance within approximately 1 m (3 side doors and back door will be automati-…
• Page 16
  Do not leave the key on places where If you lose your wireless remote control the temperature becomes high such as key, contact your Toyota dealer as soon ”PANIC” SWITCH on the dashboard. as possible to avoid the possibility of «…
• Page 17
  New L/C100(U) REPLACING THE BATTERY This equipment has been tested and —Reorient or relocate the receiving For replacement, use a lithium battery found to comply with the limits for a antenna. CR1616 and a special screwdriver. Class B digital device, pursuant to —Increase the separation between the Part 15 of the FCC Rules.
• Page 18
  New L/C100(U) 1. Remove the screw, and then the cover. 2. Remove module from 3. Remove the 2 screws to take out the frame. lid of the module. Take out the dis- charged battery and put a new battery with the positive side up. NOTICE Do not bend the terminals.
• Page 19
  New L/C100(U) Power windows 4. Install the lid with the 2 screws. 5. Install the module into the key frame and secure the cover with the screw. 6. When pushing any switch on the wire- less key, make sure the indicator light comes on.
• Page 20
  New L/C100(U) CAUTION Window lock button » Never try jamming any part of your body to make the jam protection function work intentionally. » The jam protection function may work when something gets caught just before the window is fully closed. OPERATING THE PASSENGERS’…
• Page 21
  New L/C100(U) Manual quarter windows Power quarter windows CAUTION To avoid serious personal injury, you must do the following. » Always make sure the head, hands and other parts of the body of all occupants are kept completely in- side the vehicle before you close the power windows.
• Page 22
  New L/C100(U) Back door CAUTION To avoid serious personal injury, you must do the following. » Always make sure the hands and other parts of the body of all occu- pants are kept completely inside the vehicle before you close the power quarter windows.
• Page 23
  New L/C100(U) CAUTION » Keep the back door closed while driving. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle. » If the open back door hides the stop and tail lights, rear turn signal lights or rear retro reflectors while you are parked, other road users must be warned of your vehicle by…
• Page 24
  New L/C100(U) Hood CAUTION Before driving, be sure that the back door is closed and locked, especially when small children are in the ve- hicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the ve- hicle during an accident.
• Page 25
  New L/C100(U) Theft deterrent system— 2. In front of the vehicle, pull up the To deter the vehicle theft, the system SETTING THE SYSTEM auxiliary catch lever and lift is designed to give an alarm if any of 1. Turn the ignition key to the ”LOCK” hood.
• Page 26
  » If the system does not work properly, and then reconnected Turn the ignition key from the ”LOCK” have it checked by your Toyota dealer. to ”ON” position. The indicator light will come on when the » system is activating.
• Page 27
  Make sure the cap is tightened se- curely to prevent fuel spillage in case of an accident. » Use only a genuine Toyota fuel tank cap for replacement. It has a built- in check valve to reduce fuel tank vacuum.
• Page 28
  New L/C100(U) Electric moon roof To operate the moon roof, use the The roof will fully close. To stop the roof switches beside the personal light. partway, push the same switch or tilt switch. The moon roof works when the ignition switch is in the ”ON”…
• Page 29
  New L/C100(U) » CAUTION Never sit on top of the vehicle around the roof opening. To avoid serious personal injury, you » Never try jamming any part of your must do the following. body to make the jam protection » While the vehicle is moving, always function work intentionally.
• Page 30
  New L/C100(U)

• Page 31: Steering Wheel And Mirrors

  New L/C100(U) Seats Part 1 » While the vehicle is being driven, all ve- Power tilt and telescopic steering OPERATION OF hicle occupants should have the seatback wheel upright, sit well back in the seat and prop- INSTRUMENTS AND » Outside rear view mirrors erly wear the seat belts provided.

• Page 32
  New L/C100(U) Front seats— —Seat adjustment precautions —Adjusting front seats Adjust the driver’s seat so that the foot » While adjusting the seat, do not put pedals, steering wheel instrument your hands under the seat or near panel controls are within easy reach of the moving parts.
• Page 33
  New L/C100(U) Armrest 1. SEAT POSITION AND SEAT CUSHION CAUTION ANGLE ADJUSTING SWITCH Move the control switch in the desired To reduce the risk of sliding under direction. the lap belt during a collision, avoid Releasing the switch will stop the seat at reclining the seatback any more than that position.
• Page 34
  New L/C100(U) Rear seats— —Moving second seat —Adjusting second seats third seat entry SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION » To reduce the risk of sliding under belt during collision,…

• Page 35: Folding Up Second Seat

  New L/C100(U) —Folding up second seat CAUTION After returning the seat, make sure the seat is securely locked by push- ing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. BEFORE FOLDING UP SECOND SEAT 2.

• Page 36
  New L/C100(U) FOLDING UP SECOND SEAT 2. Unlock the seat cushion. Swing the 3. Hook the strap. whole seat up and forward. 1. Lower the outer head restraint to the When returning the second seat to its lowest position and pull up the cen- original position, put the holding strap into ter head restraint.
• Page 37
  New L/C100(U) CAUTION When returning seats to their original position: » Make sure the seat belts are not twisted or caught under the seat and are arranged in their proper position and are ready to use. » Make sure that the seat is securely locked by pushing forward and rear- ward on the top of the seatback or by trying to pull up the edge of the…
• Page 38
  New L/C100(U) —Adjusting third seats —Folding up third seats SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION » To reduce the risk of sliding under belt during collision,…
• Page 39
  New L/C100(U) 2. Make sure the shoulder belt passes FOLDING UP THIRD SEAT 2. Unlock the seat cushion and slide through the hanger when folding the the whole seat the rear- most 1. Lower the head restraint to the low- third seat.
• Page 40
  New L/C100(U) 3. Swing the whole seat up. 4. Hook the strap. 5. Remove the seat striker covers from the back of the seat cushion, and When returning the third seat to its origi- install them over the seat strikers. nal position, put the holding strap into the hole.
• Page 41
  New L/C100(U) —Removing third seats CAUTION When returning seats to their original position: » Make sure the seat belts are not twisted or caught under the seat and are arranged in their proper position and are ready to use. » Make sure that the seat is securely locked by pushing forward and rear- ward on the top of the seatback or…
• Page 42
  New L/C100(U) Head restraints » CAUTION When reinstalling the seat, be care- ful not to hit the seat against you When removing or reinstalling the or inside of the vehicle. » seat, observe the following to prevent Install each seat in the same posi- personal injury: tion from which it was removed.
• Page 43
  New L/C100(U) Seat heaters For your safety and comfort, adjust the Right side CAUTION head restraint before driving. front seat To raise: Pull it up. Occupants must use caution when op- To lower: Push it down while pressing the erating the seat heater because it lock release button.
• Page 44
  New L/C100(U) Seat belts— —Seat belt precautions Toyota strongly urges that the driver and Do not allow the child to stand up or NOTICE passengers in the vehicle be properly re- kneel on either rear or front seats. An z Do not put unevenly weighed ob-…
• Page 45
  New L/C100(U) —3- point seat belts » CAUTION Keep the belts clean and dry. If they need cleaning, use a mild soap Persons should ride in their seats solution or lukewarm water. Never use bleach, dye, or abrasive clean- properly wearing their seat…
• Page 46
  » If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed. It cannot protect an adult occupant or your child from injury.
• Page 47
  New L/C100(U) CAUTION Take up slack » High- positioned belts loose- fitting belts both could cause serious injuries due to sliding under Too high the lap belt during a collision or oth- er unintended result. Keep the lap belt positioned as low on hips as possible.
• Page 48
  If the seat belt does not function Keep as low on hips as possible normally, immediately contact your Toyota dealer. Do not use the seat Sit up straight and well back in the Remove excess length of the belt and until the seat belt is fixed.
• Page 49
  Please contact your local Toyota dealer so nally intended for. that the dealer can order the proper re- quired length for the extender. Bring the heaviest coat you expect to wear for prop- er measurement and selection of length.
• Page 50
  » If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat To connect the extender to the seat The driver and front passenger’s seat until the seat belt is fixed. It cannot…
• Page 51
  New L/C100(U) When a seat belt pretensioner is acti- vated, an operating noise may be heard and a small amount of smoke- like gas may be released. This gas is harmless and does not indicate that a fire is occur- ring.
• Page 52
  If either of the following conditions occurs, this ture indicates a malfunction of the airbags or z Attachment of a grille guard (bull pretensioners. Contact your Toyota dealer bar, kangaroo bar, etc.), snowplow, soon possible service winches or any other equipment to vehicle.
• Page 53
  A driver or front passenger too close to the steering wheel or dashboard during airbag deployment killed seriously injured. Toyota strongly recommends that: » The driver sit as far back as pos- sible from the steering wheel while still maintaining control of the ve- hicle. «…
• Page 54
  New L/C100(U) However, this threshold velocity will be considerably higher if the vehicle strikes an object, such as a parked vehicle or sign pole, which can move or deform on impact, or if it is involved in an underride collision (e.g. a collision in which the nose Collision from the rear of the vehicle ”underrides”, or goes under, the bed of a truck, etc.).
• Page 55
  New L/C100(U) In a severe frontal impact, sensors detect deceleration and the system triggers the airbag inflators. Then a chemical reaction in the inflators momentarily fills the air- Hitting a curb, Falling into or bags with non- toxic gas to help restrain edge of pavement jumping over a the forward motion of the occupants.
• Page 56
  The front seat occupants can restraint system. Toyota strongly be killed or seriously injured by an recommends that all infants and inflating airbag if they do not wear children be placed in the rear seat the available seat belts.
• Page 57
  New L/C100(U) Move seat fully back » » » Never put a rear- facing child re- A forward- facing child restraint sys- Do not sit on the edge of the seat straint system on the front seat be- tem should be allowed to put on or lean over the dashboard when cause the force of the rapid infla- the front seat only when it is un-…
• Page 58
  New L/C100(U) » Do not modify or remove any wir- ing. Do not modify, remove, strike or open any components such as the steering wheel pad, steering wheel, column cover, front passen- ger airbag cover, front passenger airbag or airbag sensor assembly. Doing any of these may cause sud- den SRS airbag inflation or disable the system, which could result in…
• Page 59
  Modification of the suspension sys- z Modification of the front end struc- This SRS airbag system has a service In the following cases, contact your Toyota ture reminder indicator to inform the driver of dealer as soon as possible:…
• Page 60
  New L/C100(U) Child restraint— —Child restraint precautions Toyota strongly urges the use of child » » Toyota strongly urges use of Make sure that you have complied restraint systems children small proper child restraint system which with all installation instructions pro- enough to use them.
• Page 61
  New L/C100(U) —Child restraint system A child restraint system for a small When not using the child restraint system, CAUTION child or baby must itself be properly keep it secured with the seat belt or place restrained on the seat with either the it somewhere other than the passenger «…
• Page 62
  New L/C100(U) —Types of child restraint system Child restraint systems are classified into the following 3 types depending on the child’s age and size. (A) Infant seat (B) Convertible seat (C) Booster seat Install the child restraint system following the instructions provided by its manufac- turer.
• Page 63
  New L/C100(U) —Installation with 2- point type seat belt (A) INFANT SEAT INSTALLATION 1. Run the center lap belt through or CAUTION around the infant seat following the An infant seat is used in rear- facing instructions provided by its manufactur- position only.
• Page 64
  Contact your 2. While pressing the infant seat firmly Toyota dealer immediately. Do not CAUTION against the seat cushion and seatback, use the seat until the seat belt is tighten the lap belt by pulling its free fixed.
• Page 65
  New L/C100(U) 3. To remove the infant seat, press the (B) CONVERTIBLE SEAT INSTALLATION CAUTION buckle- release button. A convertible seat is used in forward- facing and rear- facing position depend- Do not put a rear- facing child re- ing on the child’s age and size. When straint system on the third seat if it installing, follow…
• Page 66
  1. Run the center lap belt through or 2. While pressing convertible seat Toyota dealer immediately. Do not around the convertible seat following firmly against the seat cushion and use the seat until the seat belt is instructions provided seatback, tighten the lap belt by pulling fixed.
• Page 67
  New L/C100(U) —Installation with 3- point type seat belt 3. To remove the convertible seat, press (A) INFANT SEAT INSTALLATION CAUTION the buckle- release button. An infant seat is used in rear- facing position only. Push and pull the child restraint sys- tem in different directions to be sure it is secure.
• Page 68
  New L/C100(U) 1. Run the lap and shoulder belt through » CAUTION Do not put a rear- facing child re- or around the infant seat following the straint system on the second (or instructions provided by its manufactur- » Never put a rear- facing child re- third) seat if it interferes with the er and insert the tab into the buckle straint system on the front seat be-…
• Page 69
  2. Fully extend the shoulder belt to put it 3. While pressing the infant seat firmly Toyota dealer immediately. Do not in the lock mode. When the belt is against the seat cushion and seatback, use the seat until the seat belt is…
• Page 70
  New L/C100(U) 4. To remove the infant seat, press the (B) CONVERTIBLE SEAT INSTALLATION CAUTION buckle- release button and allow the A convertible seat is used in forward- belt to retract completely. The belt will facing and rear- facing position depend- Push and pull the child restraint sys- move freely again and be ready to ing on the child’s age and size.
• Page 71
  New L/C100(U) Move seat fully back » » CAUTION A forward- facing child restraint sys- Do not put a rear- facing child re- tem should be allowed to put on straint system on the second (or » Never put a rear- facing child re- the front seat only when it is un- third) seat if it interferes with the straint system on the front seat be-…
• Page 72
  1. Run the lap and shoulder belt through 2. Fully extend the shoulder belt to put it Toyota dealer immediately. Do not or around the convertible seat following in the lock mode. When the belt is use the seat until the seat belt is…
• Page 73
  New L/C100(U) 3. While pressing convertible seat 4. To remove the convertible seat, press CAUTION firmly against the seat cushion and the buckle- release button and allow the seatback, let the shoulder belt retract belt to retract completely. The belt will Push and pull the child restraint sys- as far as it will go to hold the convert- move freely again and be ready to…
• Page 74
  New L/C100(U) Move seat fully back (C) BOOSTER SEAT INSTALLATION 1. Sit the child on a booster seat. Run CAUTION the lap and shoulder belt through or A booster seat is used in forward- fac- around the booster seat and child fol- ing position only.
• Page 75
  Always make sure the shoulder belt child from injury. Contact your Toyota dealer immediately. Do not is positioned across the center of child’s shoulder. The belt should be use the seat until the seat belt is kept away from child’s neck, but fixed.
• Page 76
  » After adjusting the steering wheel, This feature can be set inoperative. Ask try moving it up and down to make your Toyota dealer. sure it is locked in position.
• Page 77
  New L/C100(U) Outside rear view mirrors— CAUTION CAUTION » Do not adjust the steering column Do not adjust the mirror while the while the vehicle is moving. vehicle is moving. It may cause the driver to mishandle the vehicle and an accident may occur resulting in personal injuries.
• Page 78
  New L/C100(U) —Power rear view mirror control —Folding rear view mirrors NOTICE If ice should jam the mirror, do not operate the control or scrape the mir- ror face. Use a spray de- icer to free the mirror. To adjust a mirror, use the switches. The rear view mirrors can be folded backward parking…
• Page 79
  New L/C100(U) Anti-glare inside rear view mir- Sun visors— CAUTION Do not adjust the mirror while the vehicle is moving. It may cause the driver to mishandle the vehicle and an accident may occur resulting in personal injuries. Adjust the mirror so that you can just To block out glare, move the sun visor.
• Page 80
  New L/C100(U) —Vanity mirror To block the glare from the front when the To use the vanity mirror, swing down main sun visor is swung down, swing the sun visor and open the cover. down the second sun visor The vanity light comes on when you open the cover.
• Page 81
  If you feel that the automatic light control above » Center interior and personal lights comes into operation too early or too late, Position 3 (”AUTO”)—Headlights and/or all have the sensor adjusted by your Toyota » Ignition switch light of the above dealer. «…
• Page 82
  New L/C100(U) The tail lights automatically turn off when To turn on the other exterior lights and the driver’s door is opened with the igni- instrument panel lights, twist the knob to tion key in the ”ACC” or ”LOCK” position. the position 1.
• Page 83
  New L/C100(U) Emergency flashers NOTICE To prevent the battery from being dis- charged, do not leave the switch on longer than necessary when the en- gine is not running. TURN SIGNALS To turn on the emergency flashers, push the switch. To signal a turn, push the headlight/ All the turn signal lights will flash.
• Page 84
  New L/C100(U) Instrument panel light control Front fog lights Interior lights Type A To adjust the brightness of the instru- To turn on the front fog lights, twist ment panel lights, turn the dial. the band of the headlight and turn sig- nal switch lever.
• Page 85
  New L/C100(U) Personal lights » To turn on the interior light, slide the All the doors are locked when the light switch. is still on. » The interior light switch has the following One front side door will be closed with positions: the lock knob pushed forward while the other doors are locked.
• Page 86
  New L/C100(U) Center interior and personal lights To turn on the personal light, push the CENTER PERSONAL LIGHTS switch on 1 side. To turn the lights off, To turn on the center personal light, push the switch on 2 side. push the switch on 1 side.
• Page 87
  New L/C100(U) Ignition switch light Windshield wipers and washer INTERIOR AND PERSONAL LIGHTS CUT OFF OPERATION When the ignition switch is ”OFF” and any interior lights in the vehicle stay lighting on, the lights will cut off automatically after 30 minutes. You can cancel the cut off operation by: «…
• Page 88
  New L/C100(U) Rear window wiper and washer To squirt washer fluid, pull the lever NOTICE toward you. Do not operate the rear wiper if the If the windshield wipers are off, they will rear window is dry. It may scratch the operate a couple of times after the washer glass.
• Page 89
  New L/C100(U) Rear window defogger Outside rear view mirror heaters Make sure you turn the defoggers off when the surfaces are clear. Leaving the defoggers on for a long time could cause the battery to discharge, especially during stop- and- go driving. The defoggers are not designed for drying rain water or for melting snow.
• Page 90
  New L/C100(U) CAUTION Since the mirror surfaces can get hot, keep your hands off them when the mirror heater switch is on. Make sure you turn the mirror heaters off when the surfaces are clear. Leaving the mirror heaters on for a long time could cause the battery to discharge, especially during stop- and- go driving.
• Page 91
  INSTRUMENTS AND The indicator lamp goes off after driving CONTROLS— several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible. Chapter 1- 5 Gauges, Meters and Service reminder indicators «…
• Page 92
  Call a Toyota dealer or qualified repair shop for assistance. Your vehicle may overheat during severe operating conditions, such as: Oil pressure may not build up when the «…
• Page 93
  New L/C100(U) Voltmeter Tachometer NOTICE Do not drive the vehicle with the oil pressure below the normal range until the cause is fixed—it may ruin the engine. The voltmeter tells whether the battery The tachometer indicates engine speed is charged discharged.
• Page 94
  Take vehicle to Toyota dealer. You can use one trip meter to calculate the fuel economy and the other to measure the distance on each trip. All Fill up tank.
• Page 95
  Con- fully released. Stop and check. tact your Toyota dealer. If the brake fluid level is low… If the hydraulic boost pressure is lowered, At a safe place, test your brakes by start- the warning light comes on and buzzer ing and stopping.
• Page 96
  Unless the driver fastens paired by your Toyota dealer as soon as the nearest Toyota dealer or repair shop. the belt, the light keeps on flashing and possible.
• Page 97
  If it comes on while you are driving, have occurs, immediately stop your vehicle system of the airbag and front seat belt your vehicle checked by your Toyota deal- at a safe place and contact your pretensioners are operating properly.
• Page 98
  If the light does not go off, call a Toyota 4. Place the four- wheel drive control lever circuit in need of repair.
• Page 99
  New L/C100(U) Ignition switch with steering lock Part 1 ”LOCK”—Engine is off and the steering OPERATION OF wheel is locked. The key can be re- moved only at this position. INSTRUMENTS AND To turn the key from ”ACC” to the ”LOCK” CONTROLS—…
• Page 100
  New L/C100(U) Automatic transmission Lock release button To prevent misshifting Overdrive switch For selecting either a three- speed or Parking, engine starting and four- speed transmission key removal position Reverse position ON position OFF position “O/D OFF” indicator Neutral position (Shifting into (Shifting into light on the…
• Page 101
  New L/C100(U) » Your automatic transmission has a shift Shift into the ”L” position. The trans- CAUTION lock system to minimize the possibility of mission will downshift to the first gear incorrect operation. This means you can when the vehicle speed drops down to Never put your foot on the accelera- only shift out of ”P”…
• Page 102
  New L/C100(U) (c) Using ”2” and ”L” positions If the four–wheel drive control is in the z Do not continue hill climbing or ”N” position while the selector lever is in The ”2” and ”L” positions are used for hard towing for a long time in the the ”P”…
• Page 103
  ”PWR” mode, push in the driving nearby people or objects. parking brake. pattern selector button. The ”PWR” mode indicator light comes on. For ordinary driving, Toyota recommends NOTICE using the Normal mode to improve fuel If you rock your vehicle, observe the economy.
• Page 104
  New L/C100(U) Four-wheel drive system— (a) Four-wheel drive control (j) Driving ”2nd STRT” (second ”H” (high speed position, center differ- start) mode ential locked): Lever at ”H”, center differ- ential lock button pushed in In the ”2nd STRT” (Second start) mode, the transmission system shifts up from Use this for greater traction when you second gear.
• Page 105
  New L/C100(U) Rear differential lock system (b) Shifting procedure SHIFTING BETWEEN ”H” (UNLOCKED) CAUTION AND ”H” (LOCKED) To shift between unlock and lock modes Do not use the rear differential lock in ”H”, push the center differential lock but- in the conditions other than above. ton.
• Page 106
  New L/C100(U) The differential will also unlock if you shift CAUTION the four–wheel drive control lever to ”H”. Never forget to turn of the switch after » Do not lock the differentials until using this feature. the wheels have stopped spinning. To check the indicator bulb, turn the igni- Otherwise, the vehicle may move in tion key to the ”ON”…
• Page 107
  New L/C100(U) Parking brake Cruise control The cruise control allows you to cruise CAUTION the vehicle at a desired speed over 40 km/h (25 mph) even with your foot off Before driving, be sure the parking the accelerator pedal. brake is fully released and the park- Your cruising speed can be maintained up ing brake reminder light is off.
• Page 108
  Another push on the switch will hicle at that speed. your vehicle checked by your Toyota deal- turn the system completely off. If the speed is not satisfactory, tap the er at the earliest opportunity.
• Page 109
  If you use the brake pedal, cruise comes on. celerate the vehicle and then push the control is cancelled. If this is the case, contact your Toyota control lever down in the ”SET/COAST” RESUMING THE PRESET SPEED dealer and have your vehicle inspected.
• Page 110
  New L/C100(U)
• Page 111
  New L/C100(U) Car audio system— —Reference Part 1 OPERATION OF Air conditioning system » Controls INSTRUMENTS AND » Air flow selector settings CONTROLS— » Operating tips » Instrument panel vents Chapter 1- 7 Rear heater system Car audio system and Rear air conditioning system Air conditioning «…
• Page 112
  This section describes some of the basic TONE AND BALANCE YOUR RADIO ANTENNA features on Toyota audio systems. Some For details about your system’s tone and Lowering the antenna information may not pertain to your sys- balance controls, see the description of To lower a power antenna, push the ”…
• Page 113
  New L/C100(U) YOUR CASSETTE PLAYER 8 cm (3 in.) compact disc singles When you insert a cassette, the exposed Your compact disc player does not need tape should be to the right. an adaptor to play compact disc singles. Compact disc singles are about 8 cm (3 NOTICE in.) diameter- smaller…
• Page 114
  New L/C100(U) —Using your audio system: controls and features Details of specific buttons, controls, and features are described in the alphabetical listing that follows.
• Page 115
  New L/C100(U) 1 2 3 4 5 6 (Preset buttons) AM F M (Reverse/Fast forward buttons) These buttons are used to preset and Push ”AM F M” to switch between the AM Cassette Player tune in radio stations. and FM bands. ”AM”, ”FM1” or ”FM2” will Push the fast forward button to fast for- appear on the display.
• Page 116
  If the malfunction is not rectified, take CONTROL / MODE” repeatedly until ”FAd” disc player and automatic changer. your vehicle to your Toyota dealer. appears on the display. Then turn the If the player malfunctions, your audio sys- knob to adjust the front/rear balance.
• Page 117
  New L/C100(U) Dolby_ B NR PROG (Program) Random playing for the tracks on a disc: Quickly push and release ”RAND”. ”RAND” Push ”PROG” to select the other side of If you are listening to a tape that was will appear on the display. The disc you a cassette tape.
• Page 118
  New L/C100(U) Compact Disc Player SCAN Compact disc player There are two repeat features—you can Radio There are two scan features—you can ei- either replay a disc track or a whole com- ther scan the tracks on a specific disc or You can either scan all the frequencies on pact disc.
• Page 119
  New L/C100(U) SEEK (Seeking) When counting the number of tracks you SKIP want to rewind, remember to count the Radio The skip feature allows you to fast for- current track as well. For example, if you ward past long stretches of blank tape. In the seek mode, the radio finds and want to rewind to a song that is two be- This is especially useful at the end of…
• Page 120
  Usually, a problem with radio reception signals are blocked by buildings, trees, or does not mean there is a problem with Your Toyota has an electronic tuning radio other large objects. Increasing the bass your radio—it is just the normal result of (ETR).
• Page 121
  New L/C100(U) Use high- quality cassettes. » Fading—AM broadcasts are reflected by Low- quality cassette tapes can cause the upper atmosphere—especially at night. many problems, including poor sound, These reflected signals can interfere with inconsistent playing speed, those received directly from the radio sta- constant auto- reversing.
• Page 122
  New L/C100(U) » » If moisture gets into your compact disc Handle compact discs carefully, espe- player, you may not hear any sound cially when you are inserting them. even though your compact disc player Hold them on the edge and do not appears to be working.
• Page 123
  New L/C100(U) CAUTION Compact disc players use invisible la- ser beam which could cause hazard- radiation exposure directed outside the unit. Be sure to operate the player correctly as instructed. A new disc may have rough edges on its inner and outer perimeter. Remove the rough edges by pressing the side of a ball- point pen or pencil against the inner and outer perimeter of the…
• Page 124
  New L/C100(U) Air conditioning system— —Controls 1. Air Intake Selector 2. Air Flow Selector 3. ”A/C” Button 4. Fan Speed Selector 5. ”AUTO” Position (for fan speed) 6. ”AUTO” Position (for air flow) 7. Temperature Selector…
• Page 125
  New L/C100(U) ”AUTO” position 5. Windshield—Air flows mainly from the windshield vents. For automatic operation of the air condi- tioning, turn the fan speed and air flow For details about air flow selector settings, selector knobs to the ”AUTO” position. see the illustration after ”A/C”…
• Page 126
  If this happens, take your ve- hicle to a Toyota dealer for service. Air intake selector Press the button to select the air source. An indicator light will illuminate to show which air intake mode is being selected.
• Page 127
  New L/C100(U) —Air flow selector settings —Operating tips » To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
• Page 128
  New L/C100(U) » If following another vehicle on a dusty Heating Air conditioning road, or driving in windy and dusty For best results, set controls to: For best results, set controls to: conditions, it is recommended that the air intake selector be temporarily set to Fan speed—”AUTO”…
• Page 129
  New L/C100(U) Ventilation Defogging Defrosting For best results, set controls to: The inside of the windshield The outside of the windshield For best results, set controls to: For best results, set controls to: Fan speed—”AUTO” Temperature—To the desired Temperature—Towards high Temperature—Towards high temperature temperature to heat;…
• Page 130
  New L/C100(U) —Instrument panel vents Center vents Lower vent If air flow control is not satisfactory, check the instrument panel vents. The instrument panel vents may be opened or closed as shown. Side vents…
• Page 131
  New L/C100(U) Rear heater system 1. Fan Speed Selector 2. Temperature Selector…
• Page 132
  New L/C100(U) Fan speed selector This button is used to turn the rear heater system on and off, and adjust the fan speed. Pressing the button once adjusts the fan speed ”LO” mode twice successionally adjusts the fan speed to the ”HI”…
• Page 133
  New L/C100(U) Rear air conditioning system— —Controls 1. Rear Air Conditioning On- Off Button 2. ”AUTO” Button 3. Air Flow Selector 4. Fan Speed Selector 5. Temperature Selector 6. ”OFF” Button…
• Page 134
  New L/C100(U) Rear air conditioning on- off button Temperature selector To turn the rear air conditioning on, press Move the lever to adjust the tempera- the ”REAR” button. To turn the rear air ture—to the right to warm, to the left to conditioning off, press the button again.
• Page 135
  New L/C100(U) —Air flow selector settings…
• Page 136
  New L/C100(U)
• Page 137
  New L/C100(U) Clock Part 1 For example, if the ”:00” button is de- OPERATION OF pressed when time between 1:01—1:29, the time will change to 1:00. INSTRUMENTS AND If the time is between 1:30—1:59, the CONTROLS— time will change to 2:00. If the electrical power source has been disconnected from the clock, the time dis- Chapter 1- 8…
• Page 138
  The display indicates between the range of -22 F and 122 F. If the engine is not running, the key must be in the ”ACC” position. Do not hold the cigarette lighter pressed Use a Toyota genuine cigarette lighter or equivalent for replacement.
• Page 139
  New L/C100(U) Power outlets The power outlets are designed for power supply for car accessories. To use them, open the lids as shown in the following illustrations. The key must be in the ”ACC” or ”ON” position to be used. NOTICE z To prevent the fuse from being…
• Page 140
  New L/C100(U) Fuel pump shut- off system If the fuel pump shut- off system has acti- The fuel pump shut- off system is de- vated, you can turn on the fuel pump signed to activate in a collision which may shut- off system with the reset switch on cause a large amount of vehicle deforma- the impact detection sensor.
• Page 141
  New L/C100(U) Glove box Garage door opener box To use the glove box, do this. Your vehicle is equipped with a box To use the garage door opener box, do designed to store a garage door opener the following. To open: Pull the lever. transmitter.
• Page 142
  New L/C100(U) 2. Unscrew the screws on both sides 3. Remove Velcro loop on the stay. Re- Please note if the transmitter has wire clip and remove the stay. move the paper strip covering the for sun visor, this clip must be removed adhesive on back side of Velcro loop prior to adhesion of the Velcro.
• Page 143
  New L/C100(U) 4. Install the transmitter on the center 5. Remove the cover on the opening on 6. Reinstall the stay and secure it with of the stay with Velcro. the lid. the screws. Before fixing it with the screws, adjust the position of the transmitter as it can be operated through the opening on the lid.
• Page 144
  New L/C100(U) Auxiliary boxes— To use the auxiliary boxes, open the lids as shown in the following illustra- tions. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the auxiliary box closed while driving.
• Page 145
  New L/C100(U) Type C (luggage compartment) Type E (center console) Type G (front ceiling) Type D (luggage compartment) Type F (front ceiling) Type H (front ceiling)
• Page 146
  New L/C100(U) —First- aid kit holder —Warning reflector holder Types A and B auxiliary boxes are equipped with a band or strap to hold the first- aid kit. Although the first- aid kit itself is not in- cluded as an original equipment, this aux- iliary box can be used to store the first- aid kit.
• Page 147
  New L/C100(U) Cup holders Types C and D auxiliary boxes are The cup holder is designed for holding equipped with a band or straps to hold cups drink- cans securely the warning reflector. holes. To use them, observe the follow- ing illustrations.
• Page 148
  New L/C100(U) Tie- down hooks Luggage cover For third seats (right- hand side) Type A To secure your luggage, use the tie- down hooks as shown above. ”Luggage stowage precautions” Part 2 for precautions to observe for load- ing luggage. NOTICE Do not use the seat anchors instead of the tie- down hooks.
• Page 149
  New L/C100(U) Floor mat To use the luggage cover, pull it out of the retractor and hook it on the an- chors. To remove the luggage cover, lift it up. Use a floor mat of the correct size. After you remove the luggage cover, place If the floor carpet and floor mat have a it somewhere other than the passenger hole, then it is designed for use with a…
• Page 150
  New L/C100(U) CAUTION Make sure the floor mat is properly placed on the floor carpet. If the floor slips and interferes with movement of the pedals during driv- ing, it may cause an accident.
• Page 151
  It is not designed for cornering at the same speeds as conventional » Limited- slip differential two- wheel drive vehicles any more than » low- slung sports cars are designed to Your Toyota’s identification perform satisfactorily under off- road conditions.
• Page 152
  New L/C100(U) Break- in period Drive gently and avoid high speeds. » CAUTION When driving off- road or in rugged Your vehicle does not need an elaborate terrain, do not drive at excessive break- in. But following a few simple tips Always observe the following precau- speeds, jump, strike objects, etc.
• Page 153
  To help prevent gas station mix- ups, your premium type cannot be obtained, you avoid build- up of engine deposits. Toyota has a new smaller fuel tank open- may temporarily use unleaded gasoline ing. The special nozzle on pumps with…
• Page 154
  New L/C100(U) Operation in foreign countries GASOLINES CONTAINING MMT GASOLINES QUALITY If you plan to drive your Toyota in another country… Some gasolines contain an octane- en- In a very few cases, you may experience hancing additive called MMT (methylcy-…
• Page 155
  Do not drive with an extremely low the exhaust system. as possible. Remember, your Toyota fuel level; running out of fuel could Its purpose is to reduce pollutants in the dealer knows your vehicle and its cause the engine to misfire, creat- exhaust gas.
• Page 156
  It contains carbon monoxide, which periodic inspections required by the is a colorless and odorless gas. It gases to be drawn into the vehicle. Toyota Maintenance Schedule. For can cause unconsciousness or even » To allow proper operation of your scheduled maintenance information, death.
• Page 157
  Toyota recommends that the oil by the high temperature combustion diluted and make it difficult to judge level be checked every time you refuel gases during the combustion process.
• Page 158
  In this case the brakes may not work properly. If they do not work well, depress the brake pedal firmly. If the brake system warning light comes on, immediately stop your vehicle and contact your Toyota deal-…
• Page 159
  New L/C100(U) There may be the case that the brake » Even if the power assist is com- Effective way to press the ”ABS” brake system warning light stays on for about pletely lost, the brakes will still pedal: When the anti- lock brake system 60 seconds after the engine is started.
• Page 160
  You may prevent the anti- road surface. Have your vehicle checked Depressing the brake pedal repeatedly lock brake system from operating at by your Toyota dealer as soon as pos- may turn on the light. It is normal if it full effectiveness. sible.
• Page 161
  » Be careful to keep the vehicle bal- brake shoes and/or drums are replaced. anced. Locating the weight as far for- Have your Toyota dealer perform the bed- ward as possible helps maintain the ding- down. balance. «…
• Page 162
  New L/C100(U) Rear step bumper » NOTICE Never allow anyone to ride in the luggage compartment. It is not de- Do not load the vehicle beyond the signed for passengers. They should vehicle capacity weight given in Part ride in their seats with their seat belts properly fastened.
• Page 163
  This is the primary identification number Use only a spare tire of the same for your Toyota. It is used in registering size, construction and load capacity the ownership of your vehicle. as the original tires on your Toyota…
• Page 164
  New L/C100(U) —Engine number Theft prevention labels Suspension and chassis Your new vehicle carries theft preven- CAUTION tion labels which are approximately 56 mm (2.20 in.) by 16 mm (0.63 in.). Do not modify the suspension/chassis The purpose of these labels is to reduce with lift kits, spacers, springs, etc.
• Page 165
  New L/C100(U) Types of tires Determine what kind of tires your ve- CAUTION hicle is originally equipped with. 1. Summer tires » Do not mix summer and all season Summer tires are high- speed capability tires on your vehicle as this can tires best suited to highway driving under cause dangerous handling charac- dry conditions.
• Page 166
  New L/C100(U)
• Page 167
  New L/C100(U) How to start the engine– (a) Before cranking Before starting the engine Part 3 1. Check the area around the vehicle be- 1. Apply the parking brake firmly. STARTING AND DRIV- fore entering it. 2. Turn off unnecessary lights and acces- 2.
• Page 168
  If the engine will not start… ing brake pulled. If they still do not See ”If your vehicle will not start” in Part work safely, pull to the side of the road and call a Toyota dealer for assistance.
• Page 169
  New L/C100(U) Off- road driving precautions When driving your vehicle off- road, please » CAUTION Do not drive in excess of the speed observe the following precautions to en- limit. Even if the legal speed limit sure your driving enjoyment and to help «…
• Page 170
  New L/C100(U) » z Sand and mud that has accumulated CAUTION driver passengers in brake drums and around brake should fasten their seat belts when- ever the vehicle is moving. discs may affect braking efficiency Always observe the following precau- and may damage brake system com- tions to minimize the risk of serious ponents.
• Page 171
  ”Toyota Long Life Coolant” or equivalent. harder starting. If you are not sure about accumulated in and around the parking which oil to use, call your Toyota dealer– brake mechanism may freeze, making it See Chapter 7- 2 for details about coolant he will be pleased to help.
• Page 172
  Ask your fied for the trailer- hitch. Exceeding capacity. The combination of the local Toyota dealer for further details be- gross trailer weight added to the the maximum weight rating set by fore towing.
• Page 173
  » Tongue load If you wish to install a trailer hitch, you 100 = 9 to 11% ( 1) should consult with your Toyota dealer. Total trailer weight or 15% ( 2) » Use only a hitch recommended by the…
• Page 174
  New L/C100(U) Trailer Class Typical Trailer Ball Size NOTICE 2—5/16 in. 2 in. Do not use axle- mounted hitches as 1—7/8 in. they can cause damage to the axle housing, wheel bearings, wheels or 2. Select the appropriate trailer ball to tires.
• Page 175
  » Never tap into your vehicle’s hy- BRAKES AND SAFETY CHAINS draulic system as it would lower its » Toyota recommends trailers with braking effectiveness. brakes that conform to any applica- » Never tow a trailer without using a…
• Page 176
  This is especially » provincial or local regulation. If not, true on wet or slippery surfaces. Toyota recommends that you do not install the rear view mirrors required tow a trailer with a new vehicle or a for towing purpose.
• Page 177
  New L/C100(U) » » » Avoid jerky starts or sudden accelera- Crosswinds and rough roads will ad- Because of the added load of the trail- tion. versely affect handling of your vehicle er, your vehicle’s engine may overheat » and trailer, causing sway. Pay attention on hot days temperatures over Avoid jerky steering and sharp turns.
• Page 178
  New L/C100(U) How to save fuel and make your vehicle last longer, too When restarting out after parking on a Getting more kilometers/mileage from a CAUTION slope: liter/gallon of fuel is easy–just take it easy. It will help make your vehicle last 1.
• Page 179
  New L/C100(U) » » Avoid continuous speeding up and Keep the bottom of your vehicle free slowing down. Stop- and- go driving from mud, etc. This not only lessens wastes fuel. weight but also helps prevent corro- » sion. Avoi d u nnecessar y s t oppi ng a nd «…
• Page 180
  New L/C100(U)
• Page 181
  IN CASE OF AN you have followed the correct starting not start, it needs adjustment or repair. procedure given in ”How to start the Call a Toyota dealer or qualified repair EMERGENCY engine” in Part 3 and that you have shop.
• Page 182
  If the engine still will not start, it needs » Batteries contain sulfuric acid adjustment or repair. Call a Toyota dealer which is poisonous and corrosive. or qualified repair shop for assistance. Wear protective safety glasses when jump starting, and avoid spilling NOTICE acid on your skin, clothing, or ve- hicle.
• Page 183
  New L/C100(U) JUMP STARTING PROCEDURE » The gas normally produced by a 1. If the booster battery is installed in Discharged battery battery will explode if a flame or another vehicle, make sure the vehicles spark is brought near. Use only are not touching.
• Page 184
  New L/C100(U) 5. Start your engine in the normal way. After starting, run it at about 2000 rpm Jumper cable for several minutes with the accelerator pedal lightly depressed. 6. Carefully disconnect the cables in the exact reverse order: the negative cable and then the positive cable.
• Page 185
  If there is no coolant will be much harder than usual. coolant is leaking, stop the engine im- boiling over or steam, leave the engine mediately. Call a Toyota dealer for as- running. sistance. CAUTION 5. If the engine drive belt is O.K. and…
• Page 186
  5. Read the following instructions thor- Never get under the vehicle when system. You should have it checked as oughly. the vehicle is supported by the jack soon as possible at your Toyota dealer. alone. CAUTION » Use the jack only for lifting your vehicle during wheel changing.
• Page 187
  New L/C100(U) —Required tools and spare tire NOTICE Do not continue driving with a de- flated tire. Driving even a short dis- tance can damage a tire beyond re- pair. 1. Get the required tools and spare Turn the jack joint by hand. tire.
• Page 188
  New L/C100(U) To remove the spare tire under the lug- When connecting a jack handle extension 2. Remove the access hole cover on the gage compartment: with a jack handle end, use a Phillips- rear bumper with a flat- blade screw- head screwdriver or jack handle to tighten driver.
• Page 189
  New L/C100(U) 3. Insert the jack handle end into the low- 4. After the tire is lowered completely to When storing the spare tire, put it in place ering screw through the access hole the ground, remove the holding bracket with the outer side of the wheel facing up and turn it counterclockwise with push- as shown in the illustration.
• Page 190
  New L/C100(U) —Blocking the wheel —Removing wheel ornament —Loosening wheel nuts 2. Block the wheel diagonally opposite 3. Remove the wheel ornament. 4. Loosen all the wheel nuts. the flat tire to keep the vehicle from Pry off the wheel ornament, using the Always loosen the wheel nuts before rais- rolling when it is jacked up.

• Page 191: Positioning The Jack

  New L/C100(U) —Positioning the jack When jacking up the rear tires, do not install the adapter on the jack. CAUTION Make sure of the secure installation of the adapter and the jack positioned Front Rear on a level and solid surface. Make sure the jack is positioned on a level and solid place.

• Page 192
  New L/C100(U) —Raising your vehicle CAUTION Never get under the vehicle when the vehicle supported jack alone. When connecting a jack handle extension 6. After making sure that no one is in with another extension and a jack handle the vehicle, raise it high enough so end, use a Phillips- head screwdriver or that the spare tire can be installed.
• Page 193
  New L/C100(U) —Changing wheels —Reinstalling wheel nuts 7. Remove the wheel nuts and change Before putting on wheels, remove any cor- 8. Reinstall all the wheel nuts finger tires. rosion on the mounting surfaces with a tight. wire brush or such. Installation of wheels Lift the flat tire straight off and put it Reinstall the wheel nuts (tapered end in- without good metal- to- metal contact at the…
• Page 194
  New L/C100(U) —Lowering your vehicle —Reinstalling wheel ornament CAUTION When lowering the vehicle, make sure all portions of your body and all oth- er persons around will not be injured the vehicle is lowered to the ground. 9. Lower the vehicle completely and 10.
• Page 195
  11. Check the air pressure of the re- If towing is necessary, we recommend (a) Towing with wheel lift type truck— placed tire. you have it done by your Toyota dealer or a commercial tow truck service. In Adjust the air pressure to the specification —From front consultation with them, have your ve- designated in Part 8.
• Page 196
  New L/C100(U) —Emergency towing (a) Towing with wheel lift type truck (c) Towing with sling type Use a towing dolly under the wheels not truck lifted by the truck. (b) Using flat bed truck Front (c) Towing with sling type truck NOTICE Do not tow with sling type truck, ei- ther from the front or rear.
• Page 197
  New L/C100(U) If towing is necessary, we recommend CAUTION CAUTION you to have it done by your Toyota dealer or a commercial tow truck ser- Use extreme caution when towing ve- If the engine is not running, the pow- vice.
• Page 198
  » If the towing vehicle can hardly move, do not forcibly continue the towing. Contact your Toyota dealer or a commercial tow truck service for assistance. » Tow the vehicle as straight ahead as possible.
• Page 199
  Toyota dealer if you can give them the key number and master key. Even if you lose only one key, contact your Toyota dealer to make a new key. If you lose all your master keys, you cannot make new keys; the whole engine immobi- liser system must be replaced.
• Page 200
  New L/C100(U)
• Page 201
  Now, it is up to you. Proper » High temperatures will cause corrosion care of your Toyota can help ensure long- to those components of the vehicle » Protecting your Toyota from term corrosion prevention.
• Page 202
  We recommend See ”Washing and waxing your Toyota” for » When driving in the areas where there that the fittings and the area where the more tips.
• Page 203
  NOTICE ing your Toyota through an automatic car wash. NOTICE Do not use gasoline or strong sol- vents, which may be toxic or cause Always remove the plastic bumpers if damage.
• Page 204
  New L/C100(U) Cleaning the interior NOTICE NOTICE CAUTION z Do not use dye or bleach on the Do not use solvent, thinner, gasoline Do not wash the vehicle floor with or window cleaner on the interior. belts—it may weaken then water, or allow water to get onto the z Do not use the belts until they be- floor when cleaning the vehicle interi-…
• Page 205
  If you have any questions about the leather these could cleaning of your Toyota, your local cause discoloring. Toyota dealer will be pleased to answer them. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather.
• Page 206
  New L/C100(U)

• Page 207: Maintenance And Care

  See ”Owner’s War- or if you prefer, your Toyota dealer will be ranty Information Booklet” or ”Owner’s pleased to do them at a nominal cost.

• Page 208
  They learn to work on Supplement” for the details. vehicle to your Toyota dealer or a quali- Toyotas before they work on your vehicle, fied service shop immediately. It is recom- rather than while they are working on it.
• Page 209
  New L/C100(U) Tire surface and wheel nuts INSIDE THE VEHICLE Seat belts Check the tires carefully for cuts, damage Check that the seat belt system such as Items listed below should be checked or excessive wear. See Chapter 7- 2 for buckles, retractors and anchors operate regularly, e.g.
• Page 210
  New L/C100(U) Does your vehicle need repairing? Automatic transmission ”Park” mecha- Brake fluid level Be on the alert for changes in perfor- nism Make sure the brake fluid level is correct. mance, sounds, and visual tip- offs that Check the lock release button of the se- See Chapter 7- 2 for additional information.
• Page 211
  » Engine continually runs hot; oil pres- sure gauge stays low If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. It probably needs adjustment or repair. CAUTION Do not continue driving with the ve- hicle unchecked.
• Page 212
  New L/C100(U)
• Page 213
  New L/C100(U) Part 7 DO- IT- YOURSELF MAINTENANCE Chapter 7- 1 Introduction » Engine compartment overview » Fuse locations » Do- it- yourself service precautions » Parts and tools…
• Page 214
  New L/C100(U) Engine compartment overview 1. Engine oil filler cap 2. Brake fluid reservoir 3. Fuse blocks 4. Battery 5. Windshield rear window washer fluid tank 6. Engine oil level dipstick 7. Engine coolant reservoir 8. Electric cooling fan 9. Power steering fluid reservoir…
• Page 215
  New L/C100(U) Fuse locations Spare fuses…
• Page 216
  Read separate compartment—the engine, radiator, should be taken to avoid prolonged Toyota Warranty statement for details and exhaust manifold, power steering and repeated contact with it. To re- suggestions. fluid reservoir…
• Page 217
  Remember that battery and ignition nance. Remember all Toyota parts are de- wear could result. Also backfiring signed in metric sizes, so your tools must cables carry high currents or volt- could cause a fire in the engine be metric.
• Page 218
  New L/C100(U) Checking brake fluid Checking and replacing fuses Parts (if level is low): Parts (if replacement is necessary): » » SAE J1703 or FMVSS No.116 DOT 3 Fuse with same amperage rating as brake fluid original Tools: Adding washer fluid «…
• Page 219
  New L/C100(U) Checking the engine oil level Part 7 DO- IT- YOURSELF Low level Full level MAINTENANCE— Chapter 7- 2 Engine and Chassis » Checking the engine oil level » Add oil O.K. Too full Checking engine coolant level » Checking brake fluid With the engine at operating tempera- 3.
• Page 220
  New L/C100(U) 4. Pull the dipstick out and look at the oil ENGINE OIL SELECTION NOTICE level on the end. Use API grade SJ, ”Energy- Conserving” z Avoid overfilling, engine multigrade engine oil or ILSAC multigrade CAUTION could be damaged. engine oil.
• Page 221
  Visually check the radiator, hoses, radiator cap and drain cock and water pump. If you can find no leak, have your Toyota dealer test the cap pressure and check for leaks in the cooling system. ILSAC certification mark…
• Page 222
  New L/C100(U) Checking brake fluid We recommend to use 50% solution for CAUTION your Toyota, to provide protection down to about -35_C (- 31_F). When it is extreme- To prevent burning yourself, do not ly cold, to provide protection down to…
• Page 223
  New L/C100(U) Checking power steering fluid If the level is low, add SAE J1703 or NOTICE FMVSS No. 116 DOT 3 brake fluid to the brake reservoir. If you spill the fluid, be sure to wipe If cold If hot it off to prevent it from damaging the O.K.
• Page 224
  If the caps If a tire frequently needs refilling, have it have been lost, have new ones put on checked by your Toyota dealer. as soon as possible.
• Page 225
  When a tire is replaced, the wheel REPLACING YOUR TIRES The tires on your Toyota have built- in should always be balanced. tread wear indicators to help you know When replacing a tire, use only the An unbalanced wheel may affect vehicle when the tires need replacement.
• Page 226
  SNOW TIRE SELECTION If you need snow tires, select the same size, construction and load capacity as the original tires on your Toyota. Do not use tires other than those men- tioned above. Do not install studded tires without first checking local regulations for To equalize tire wear and help extend possible restrictions.
• Page 227
  New L/C100(U) Regulations regarding the use of tire CAUTION chains vary according to location or Side chain type of road, so always check them » Do not exceed 50 km/h (30 mph) or before installing chains. chain manufacturer’s recom- CHAIN INSTALLATION mended speed limit, whichever is Install the chains on the rear tires as lower.
• Page 228
  When replacing wheels, care should be » Use only the Toyota wheel nuts and taken to ensure that the wheels are re- wrench designed for your aluminum placed by ones with the same load ca- wheels.
• Page 229
  New L/C100(U) Checking battery condition— —Precautions Part 7 DO-IT-YOURSELF » CAUTION If electrolyte gets on your skin, thoroughly wash the contact area. If MAINTENANCE— BATTERY PRECAUTIONS you feel pain or burning, get medi- cal attention immediately. The battery produces flammable and «…
• Page 230
  Have battery tighten. DARK WHITE checked by your Tighten hold- down clamp only Toyota dealer. enough to keep the battery firmly in place. Overtightening may damage the battery CLEAR Have battery case. or LIGHT checked by your YELLOW Toyota dealer.
• Page 231
  New L/C100(U) Checking and replacing fuses Battery recharging precautions During recharging, the battery is pro- ducing hydrogen gas. Therefore, before recharging: Type A 1. If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable. 2.
• Page 232
  Add washer tool is shown in the illustration. tem. Have your Toyota dealer correct it as fluid. soon as possible. If you are not sure whether the fuse has You may use plain water as washer fluid.
• Page 233
  New L/C100(U) Replacing light bulbs— —Headlights The following illustrations show how to Bulb Light bulbs Type gain access to the bulbs. When replacing a bulb, make sure the ignition switch and Front fog lights 9006 light switch are off. Use bulbs with the Parking lights —…
• Page 234
  If the connector is tight, wiggle it. LEFT–HAND HEADLIGHT: Install washer inlet securely. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
• Page 235
  If the connector is tight, wiggle it. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
• Page 236
  New L/C100(U) —Front turn signal and front side marker lights —Parking lights Use a Phillips – head screwdriver. Use a Phillips – head screwdriver.
• Page 237
  New L/C100(U) —Stop and tail lights Use a Phillips–head screwdriver.
• Page 238
  New L/C100(U) —Rear turn signal, stop and tail, and back–up lights —License plate lights Use a Flat- bladed screwdriver. a: Back–up light b: Rear turn signal light c: Stop and tail light…
• Page 239
  New L/C100(U)
• Page 240
  New L/C100(U)

• Page 241: Specifications

  New L/C100(U) Dimensions and weight Engine Part 8 Overall length mm (in.) 4890 (192.5) Model: SPECIFICATIONS 2UZ- FE Overall width mm (in.) 1940 (76.4) Type: Overall height mm (in.) 1875 (73.8) » Dimensions and weight 8 cylinder V type, 4 cycle, gasoline Wheelbase mm (in.) 2850 (112.2)

• Page 242
  Coolant type: be obtained, you may temporarily use DENSO SK20R11 unleaded gasoline with an Octane Rat- ”Toyota Long Life Coolant” or equivalent IFR6A11 ing as low as 87 (Research Octane With ethylene- glycol type coolant for a Number 91). Spark plug gap, mm (in.): proper corrosion protection of aluminum 1.1 (0.043)
• Page 243
  New L/C100(U) AUTOMATIC TRANSMISSION Oil type: BRAKES Standard differential Fluid capacity (drain and refill), L (qt., Minimum pedal clearance when depressed Hypoid gear oil API GL- 5 Imp. qt.) with the pressure of 490 N (50 kgf, 110 Limited slip differential Up to 3.5 (3.7, 3.1) lbf) with the engine running, mm (in.): Hypoid gear oil for limited slip differ-…
• Page 244
  New L/C100(U) Tires Fuses Tire size: P275/70R16 114S Tire pressure, kPa (kgf/cm or bar, psi): Normal driving Front 220 (2.2, 32) Rear 220 (2.2, 32) Tailer towing Front 220 (2.2, 32) Rear 240 (2.4, 35) Wheel size: Wheel nut torque, N·m (kgf·m, ft·lbf): 131 (13.4, 96.6) Engine compartment Engine compartment…
• Page 245
  New L/C100(U) 18. HEAD (RH- UPR) 20 A: Right- hand 28. GAUGE 15 A: Gauges and meters, headlight (high beam) service reminder indicators and warning buzzer (except discharge, open door 19. HEAD (LH- LWR) Left- hand warning lights), back- up headlight (low beam), front fog lights lights, air conditioning system, electron- 20.
• Page 246
  New L/C100(U) 40. ECU- IG 15 A: Anti- lock brake system, 51. AM1 NO.1 80 A: Charging system, all shift lock system, power seats, power components in ”AM1 NO.2”, ”GAUGE”, antenna, power tilt telescopic ”WIPER”, ”DIFF”, ”A.C” ”SEAT steering system HTR”…

• Page 247: Uniform Tire Quality Grading

  However, NHTSA cannot become involved in individual prob- lems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.

• Page 248
  A tire marked C may have tire failure. quality grading. poor traction performance. Your Toyota dealer will help answer any Warning: The traction grade assigned to questions you may have as you read this this tire is based on braking (straight information.
• Page 249
  New L/C100(U) U −3 Quick index » If a service reminder indicator or warning buzzer comes on ..» If your vehicle will not start ……..»…

Нижний рычаг передней подвески(независимая передняя подвеска)
Снятие
1. Снимите переднее колесо.
Момент затяжки:
стальные диски — 209 Нм
алюминиевые диски — 131 Нм
2. Снимите брызговик переднего крыла.
3. Снимите торсион передней подвески.
4. Отверните болт и отсоедините стойку стабилизатора от нижнего рычага подвески.
Момент затяжки: 52 Нм
5. Отверните болт с гайкой и отсоедините амортизатор от нижнего рычага подвески.
Момент затяжки: 135 Нм
6. Отсоедините поворотный кулак от нижнего рычага подвески.
а) Выньте шплинт и отверните гайку.
Момент затяжки: 159 Нм
б) Используя съемник, отсоедините поворотный кулак от нижнего рычага подвески.
7. Отверните болты и гайки и снимите нижний рычаг подвески.
Момент затяжки: 230 Нм

Замена втулок
1. Замена втулки №1.
а) Используя зубило и молоток, снимите фланец втулки №1.
б) Используя специнструмент, удалите втулку №1.
в) Используя специнструмент и пресс, установите новую втулку.
2. Замена втулки №2.
а) Используя специнструмент, удалите втулку №2.
б) Используя специнструмент, установите новую втулку.

Замена Пыльника
1. Снимите стопорное кольцо и пыльник.
2. Смажьте шаровой шарнир специальной консистентной смазкой.
3. Установите новый пыльник и стопорное кольцо.

Установка
Установка проводится в порядке, обратном снятию. После установки нижнего рычага передней подвески проверьте углы установки передних колес.

О Книге