Метеостанция витек 3536 инструкция на русском

Инструкция и руководство для
Vitek VT-3536 на русском на английском

32 страницы подробных инструкций и пользовательских руководств по эксплуатации

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

MANUAL INSTRUCTION

МОДЕЛЬ VT-3536

ALARM CLOCK / WIRELESS WEATHER STATION

ЧАСЫ — БУДИЛЬНИК / БЕСПРОВОДНАЯ МЕТЕОСТАНЦИЯ С

ОТОБРАЖЕНИЕМ ДАННЫХ О ПОГОДЕ

3536.qxd 30.08.2004 14:48 Page 3

Wireless Weather Station with weather report
Congratulations on your purchase of this weather station. Please take the
time to read and understand this manual so you can begin to enjoy the con-
venience and features this product has to offer.
The unit is a weather station device that has several weather related func-
tions. The main features are:

Remote Transmitter

•

drip-proof design with LCD

• socket of external sensor probe
• temperature display in user-selectable °C or °F
• humidity display
• transmission range: up to 40 meters in open area
• battery type: 2 x AA size

ENGLISH

2

FEATURES

Main Display Unit:

•

dual clock and dual alarm

• calendar (month/day/date)
• local temperature display
• receives and displays tempera-

ture and humidity readings from
up to 3 remote transmitters via
RF technology of 433MHz

• minimum and maximum temper-

ature and humidity memory

• temperature and humidity trend

indicator

• temperature history (bar graph

for past 12 hours)

• weather icons
• user-selectable C or F
• table stand or wall mountable
• battery type: 2 x AA

VT-3536

receiver

VT-3536

transmitter

3536.qxd 30.08.2004 14:48 Page 2

GETTING STARTED
1. MIN/-/MIN: shows minimum temper-

ature & humidity; adjusts clock,
alarm, date and temperature alarm
values

2. ON/OFF: toggles between °C and °F,

12 and 24 hour format, Alarm 1 & 2
on and off, and bar graph indoor and
outdoor selection; scrolls through
temperature alarm settings
(off/high/low)

3. CHN: scrolls through remote chan-

nels (1 to 3); adjusts time and date
values

4. HOUR/+/MAX: shows maximum tem-

perature & humidity; adjusts clock,
alarm, date and temperature alarm
values

5. SNOOZE/MODE: scrolls through Clock 1 & 2, Alarm 1 & 2, Date and

Temperature Alarm mode; snooze for alarm

6. LCD display
7. SET: enter to House code and Channel setting mode
8. C/F: change between °C or °F, change channel and house code
9. Battery compartment
10. Socket for external sensor probe.
11. Wall Mount Holder & Table Stand

ENGLISH

3

Button placement

3536.qxd 30.08.2004 14:48 Page 3

SETTING UP
Set up the transmitter(s) before setting up the
receiver

1. Remove battery cover and insert batteries

to start setup

AA size batteries (included) Insert batteries
into compartment observing proper polarity

2. HOUSE CODE will flash for 8 seconds
3. Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single
receiver, set each transmitter to the same House code

4. CHANNEL will flash for 8 seconds
5. Select CHANNEL(1-3) by pressing C/F
If you have multiple transmitters for a single receiver, set
each transmitter to a different Channel code

6. Humidity & Temperature will alternatively display on LCD

screen

7. Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals

from neighboring sources

• Factory default: house code = 01 and channel = 01

1. Remove battery cover
2. 2 AA size batteries (included)
3. Insert batteries into compartment,

observing proper polarity; replace cover

LOW BATTERY INDICATION:
Receiver: Low battery indicator will display
continuously when batteries need replac-

ing. On transmitter,

will be displayed

ENGLISH

4

Setting up transmitter(s)

Setting up receiver

3536.qxd 30.08.2004 14:48 Page 4

WIRELESS TRANSMISSION

Automatic Learn Function:
The learn function starts automatically and runs for approximately 3 minutes
when batteries are first installed in the receiver.
Within these 3 minutes, the receiver will pick up the temperature and humidity
signals from the remote transmitter and display the reading.

Manual Learn Function (Remote Signal Search):
If a new remote transmitter is added or if signal is lost (outdoor read out on
the receiver is blinking), the learn function must be executed again.

1. Press and hold CHN for 3 seconds to start.
2. Unit will beep to indicate that learn function has started.
3. Channel symbol will blink and unit will continue to beep as each remote

transmitter is detected.

4. Within 3 minutes, the temperature and humidity reading of the remote

transmitter will display on the receiver.

ENGLISH

5

3536.qxd 30.08.2004 14:48 Page 5

WIRELESS TRANSMISSION
Environmental factors and signals from other household devices, such as
remote entry controls, security systems, and computers, may interfere with
the wireless transmission of this product and cause temporary reception
loss. This is normal and does not affect the general performance of this
product. Stable reception will resume once the interference ends.

For optimal performance:
• Place the receiver and remote transmitter side by side about 1 metre

apart, and allow the receiver and remote transmitter to synchronize for 10
minutes before you place the remote transmitter outdoors.

• The remote transmitter should be placed in a dry shaded area.

NOTE: Fog andmist will not harm the remote transmitter but direct rain

must be avoided.

• Mount the remote transmitter upright avoiding metallic objects and

frames, such as window sills. Verify that there are no obstacles like a
transmission tower or steep hill that can cause interference and blockage
between the remote transmitter and receiver.

• Place the receiver unit at least 2 metres away from any electrical devices,

such as your television set, computer, cordless phone, or any radio con-
trolled equipment.

• 1Replace unit(s) with fresh batteries when the Low Battery Indicator lights

up.

• Refer to the SETTING UP section.
• You may need to reposition the remote transmitter to a different location

and/or closer to the receiver for the best transmission.

ENGLISH

6

3536.qxd 30.08.2004 14:48 Page 6

CLOCK SETTING

Manual clock setting
Clock 1 Setting:
1. Press and hold MODE for 3 seconds to

enter the clock setting mode (the CLOCK 1
symbol appears and the time will flash)

2. Press HOUR to set the hour and MINUTE to

set the minute;

3. Press ALARM/(C/F) during clock setting, to

change between 12 and 24 hour display.
This also will end clock setting.

4. Press MODE or do not press any key for 1

minute to finish clock setting.

Clock 2 Setting:
5. Scroll to Clock 2 mode using MODE
6. Press + or — key to change the hour (in one

hour increments/decrements relative to
Clock 1)

ENGLISH

7

3536.qxd 30.08.2004 14:48 Page 7

ALARM SETTING
Alarm 1 and Alarm 2 Setting:
1. Scroll to Alarm 1 using MODE. The

ALARM 1

symbol will appear.

2. Press HOUR to set hour.
3. Press MIN to set minute.
4. Press ON/OFF to toggle alarm on and off.
5. When the alarm is set ON, the ‘on’ symbol will

appear.

6. In the normal clock display, if the alarm is set ON,

the

ALARM 1 symbol will also appear on the

display.

• To set Alarm 2, scroll to Alarm 2 using MODE.
• The

ALARM 2 symbol will appear. Follow the

same steps as above to set. In normal clock dis-
play, if the alarm is set ON, the

ALARM 2 sym-

bol will also appear on the display.

NOTE: Both Alarm 1 and Alarm 2 are based on the time set on Clock 1.

When the Alarm Sounds:
•

ALARM 1 or

ALARM 2 symbol will blink.

• The crescendo alarm will gradually increase in

loudness.

• Press SNOOZE to snooze the alarm for 5 min-

utes.

• After that the alarm will sound again.
• Press ANY other key to stop the alarm. Or without

interruption, the alarm will automatically stop
after one minute.

ENGLISH

8

3536.qxd 30.08.2004 14:48 Page 8

CALENDAR SETTING
1. Scroll to Date mode using MODE
2. Press HOUR/+/MAX to set month
3. Press MIN/-/MIN to set date
4. Press CHN to set day

TEMPERATURE & HUMIDITY
DISPLAY

Local (Indoor) Temperature
The local (indoor) temperature will dis-
play instantly after batteries are inserted
into the receiver.

Remote (Outdoor) Temperature and Humidity
If the Learn Function is performed suc-
cessfully (refer to the WIRELESS TRANS-
MISSION section), the remote (outdoor)
temperature and humidity will display in
the bottom-right corner of the LCD
screen.
Press CHN to toggle between Channels
1, 2 and 3.

NOTE: The temperature and humidity
data will alternate on the LCD screen.

Selecting °C or °F Temperature Display
Toggle between °C and °F by pressing
ON/OFF in either Clock 1 or Clock 2 mode.

ENGLISH

9

3536.qxd 30.08.2004 14:48 Page 9

Комментарии

Как использовать наш сайт инструкций OnlineManuals.ru
Наша цель состоит в том, чтобы предоставить вам быстрый доступ к содержанию инструкции для — VT-3536.
С помощью онлайн просмотра, Вы можете быстро просмотреть содержимое инструкции и найти решение проблемы с — VT-3536.

Для Вашего удобства
Если листать руководство пользователя — VT-3536 прямо на сайте, не очень удобно для Вас, есть два возможных решения:

• Просмотр в полноэкранном режиме — легко просмотреть руководство пользователя (без загрузки его на свой компьютер), Вы можете использовать режим полноэкранного просмотра.
Для просмотра инструкции пользователя — VT-3536 на полном экране, используйте кнопку «Открыть в Pdf-viewer».

• Загрузка на компьютер — Вы можете также скачать Инструкция — VT-3536 на свой компьютер и сохранить его в файлах.

Многие люди предпочитают читать документы не на экране, а в печатной версии.
Возможность печати руководства пользователя также была предусмотрена на нашем сайте,
и вы можете использовать ее, нажав на иконку «печать» в Pdf-viewer.
Нет необходимости печатать все руководство — VT-3536, можно выбрать только нужные страницы инструкции.