Мфу epson expression home xp 2100 инструкция

• Page 1
  Getting Started with the Epson XP-2100 Printer…

• Page 2: Quick Tour

  1. Unpacking The box contains the printer, Epson warranty paperwork and a pack of 4 inks for the printer. Open the box and remove all plastic wrapping from the printer. Also remove all the blue tape, which is placed on certain parts of the printer to stop them vibrating and moving during transit.

• Page 3
  Control Panel Above the paper output opening is the control panel. This contains six buttons that can be used to control the printer. Each button has a raised coloured dot above it. From left to right the button are: Power button: Use this to turn the printer on and off Wifi button: Press for 10 seconds to make the printer look for…
• Page 4
  device with something called Wifi-Direct. The lower light can be ignored. Ink and Paper Lights: To the right of the Stop Printing button are two lights, one above each other. The top light illuminates if ink needs replacing, the bottom if blank paper needs replacing. Scanner Lid The top surface of the printer forms the scanner lid.
• Page 5
  Location of ink cartridge holder The top half of the printer latches open. Push the blue catch on the left hand side to allow the top half of the printer to close again. Power inlet The power inlet socket is located at the back of the printer in a small recess.
• Page 6
   Plug in the power cord and switch on the printer. The empty holder for the ink cartridges should automatically move over to the left, ready for the ink cartridges to be inserted. If it doesn’t move over, just press the Stop Printing button. 4.
• Page 7
  6. Installing the Epson Apps Epson Print Enabler From the Tools menu in Synapptic, use the Play Store app to search for and install the Epson Print Enabler app. This allows Synapptic, and other apps, to communicate with an Epson printer.
• Page 8
  Synapptic, or through the Synapptic User Manual. 8. Replacement ink and paper At Synapptic we stock a full range of paper and inks for all Epson printers. Please contact us if you would like to place an order. 9. Replacing empty ink When ink starts to run out in a particular cartridge, the ink light will begin to flash.
• Page 9
  10. Full user manual This document provides a quick summary of the printer. A full User Manual can be downloaded from the Epson website by searching for “Epson XP 2100 printer user manual” or by typing in the following URL: https://download.epson- europe.com/pub/download/6334/epson633412eu.pdf…

Какой вес Epson Expression Home XP-2100?

Как удалить замятую бумагу из принтера?

Почему после установки оригинального картриджа принтер не работает?

Чем обусловлено плохое качество печати?

В чем разница между лазерным и струйным принтером?

Почему при печати на струйном принтере появляются черные полосы?

Что означает аббревиатура DPI?

Сколько картриджей можно поместить в Epson Expression Home XP-2100?

Какая высота Epson Expression Home XP-2100?

Какая ширина Epson Expression Home XP-2100?

Какая толщина Epson Expression Home XP-2100?

Инструкция Epson Expression Home XP-2100 доступно в русский?

User’s Guide

Copyright

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation and its affiliates shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson Approved Products by Seiko Epson Corporation.

© 2019 Seiko Epson Corporation

The contents of this manual and the specifications of this product are subject to change without notice.

User’s Guide

Trademarks

Trademarks

EPSON®is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a trademark of Seiko Epson Corporation.

Epson Scan 2 software is based in part on the work of the Independent JPEG Group.

libtiff

Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc.

Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED «AS-IS» AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Intel® is a registered trademark of Intel Corporation.

Microsoft®, Windows®, and Windows Vista®are registered trademarks of Microsoft Corporation.

Apple, Macintosh, macOS, OS X, Bonjour, ColorSync, Safari, iPad, iPhone, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

Google Cloud Print, Chrome, Chrome OS, Google Play and Android are trademarks of Google LLC.

Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

User’s Guide

Contents

Where to Get Help. . . . . . . . . . . . . . . . . . . . . . . . 151

Technical Support Web Site. . . . . . . . . . . . . . . .151

Contacting Epson Support. . . . . . . . . . . . . . . . 151

User’s Guide

About This Manual

About This Manual

Introduction to the Manuals

The following manuals are supplied with your Epson printer. As well as the manuals, see the help included in the various Epson software applications.

Important Safety Instructions (paper manual)

Provides you with instructions to ensure the safe use of this printer.

Start Here (paper manual)

Provides you with information on setting up the printer, installing the software, using the printer, solving problems, and so on.

User’s Guide (digital manual)

This manual. Provides overall information and instructions on using the printer, on network settings when using the printer on a network, and on solving problems.

You can obtain the latest versions of the above manuals with the following methods.

Paper manual

Visit the Epson Europe support website at http://www.epson.eu/Support, or the Epson worldwide support website at http://support.epson.net/.

Digital manual

Start EPSON Software Updater on your computer. EPSON Software Updater checks for available updates of Epson software applications and the digital manuals, and allows you to download the latest ones.

Related Information

& “Software Update Tools (EPSON Software Updater)” on page 109

Using the Manual to Search for Information

The PDF manual allows you to search for information you are looking for by keyword, or jump directly to specific sections using the bookmarks. You can also print only the pages you need. This section explains how to use a PDF manual that has been opened in Adobe Reader X on your computer.

User’s Guide

About This Manual

Searching by keyword

Click Edit > Advanced Search. Enter the keyword (text) for information you want to find in the search window, and then click Search. Hits are displayed as a list. Click one of the displayed hits to jump to that page.

Jumping directly from bookmarks

Click a title to jump to that page. Click + or > to view the lower level titles in that section. To return to the previous page, perform the following operation on your keyboard.

Windows: Hold down Alt, and then press ←.

Mac OS: Hold down the command key, and then press ←.

Printing only the pages you need

You can extract and print only the pages you need. Click Print in the File menu, and then specify the pages you want to print in Pages in Pages to Print.

To specify a series of pages, enter a hyphen between the start page and the end page. Example: 20-25

To specify pages that are not in series, divide the pages with commas. Example: 5, 10, 15

User’s Guide

About This Manual

Marks and Symbols

!Caution:

Instructions that must be followed carefully to avoid bodily injury.

cImportant:

Instructions that must be observed to avoid damage to your equipment.

Note:

Provides complementary and reference information.

Related Information

& Links to related sections.

Descriptions Used in this Manual

Screenshots of the printer driver and the Epson Scan 2 (scanner driver) screens are from Windows 10 or macOS Mojave. The content displayed on the screens varies depending on the model and situation.

Illustrations used in this manual are examples only. Although there may be slight differences depending on the model, the method of operation is the same.

You can read the QR code using dedicated app.

Operating System References

Windows

In this manual, terms such as «Windows 10», «Windows 8.1», «Windows 8», «Windows 7», «Windows Vista», and «Windows XP» refer to the following operating systems. Additionally, «Windows» is used to refer to all versions.

Microsoft® Windows® 10 operating system

Microsoft® Windows® 8.1 operating system

Microsoft® Windows® 8 operating system

Microsoft® Windows® 7 operating system

Microsoft® Windows Vista® operating system

Microsoft® Windows® XP operating system

Microsoft® Windows® XP Professional x64 Edition operating system

Mac OS

In this manual, «Mac OS» is used to refer to macOS Mojave, macOS High Sierra, macOS Sierra, OS X El Capitan, OS X Yosemite, OS X Mavericks, OS X Mountain Lion, Mac OS X v10.7.x, and Mac OS X v10.6.8.

User’s Guide

Important Instructions

Important Instructions

Safety Instructions

Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer.

Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following Web site to learn the meaning of the symbols.

http://support.epson.net/symbols

Use only the power cord supplied with the printer and do not use the cord with any other equipment. Use of other cords with this printer or the use of the supplied power cord with other equipment may result in fire or electric shock.

Be sure your AC power cord meets the relevant local safety standard.

Never disassemble, modify, or attempt to repair the power cord, plug, printer unit, scanner unit, or options by yourself, except as specifically explained in the printer’s manuals.

Unplug the printer and refer servicing to qualified service personnel under the following conditions:

The power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the casing damaged; the printer does not operate normally or exhibits a distinct change in performance. Do not adjust controls that are not covered by the operating instructions.

Place the printer near a wall outlet where the plug can be easily unplugged.

Do not place or store the printer outdoors, near excessive dirt or dust, water, heat sources, or in locations subject to shocks, vibrations, high temperature or humidity.

Take care not to spill liquid on the printer and not to handle the printer with wet hands.

Keep the printer at least 22 cm away from cardiac pacemakers. Radio waves from this printer may adversely affect the operation of cardiac pacemakers.

Safety Instructions for Ink

Be careful when you handle used ink cartridges, as there may be some ink around the ink supply port.

If ink gets on your skin, wash the area thoroughly with soap and water.

If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.

If ink gets into your mouth, see a doctor right away.

Do not disassemble the ink cartridge; otherwise ink may get into your eyes or on your skin.

Do not shake ink cartridges too vigorously and do not drop them. Also, be careful not to squeeze them or tear their labels. Doing so may cause ink leakage.

Keep ink cartridges out of the reach of children.

User’s Guide

Important Instructions

Printer Advisories and Warnings

Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this manual for future reference.

Advisories and Warnings for Setting Up the Printer

Do not block or cover the vents and openings in the printer.

Use only the type of power source indicated on the printer’s label.

Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.

Avoid electrical outlets controlled by wall switches or automatic timers.

Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.

The power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of the power-supply cords and do not allow the power-supply cords to be stepped on or run over. Be particularly careful to keep all the power-supply cords straight at the ends and the points where they enter and leave the transformer.

If you use an extension cord with the printer, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate short-circuit protection and over-current protection for the printer.

When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.

Place the printer on a flat, stable surface that extends beyond the base of the printer in all directions. The printer will not operate properly if it is tilted at an angle.

Allow space above the printer so that you can fully raise the document cover.

Leave enough space in front of the printer for the paper to be fully ejected.

Avoid places subject to rapid changes in temperature and humidity. Also, keep the printer away from direct sunlight, strong light, or heat sources.

Advisories and Warnings for Using the Printer

Do not insert objects through the slots in the printer.

Do not put your hand inside the printer during printing.

Do not touch the white flat cable inside the printer.

Do not use aerosol products that contain flammable gases inside or around the printer. Doing so may cause fire.

Do not move the print head by hand; otherwise, you may damage the printer.

Be careful not to trap your fingers when closing the scanner unit.

Do not press too hard on the scanner glass when placing the originals.

User’s Guide

Important Instructions

Always turn the printer off using the P button. Do not unplug the printer or turn off the power at the outlet until the P light stops flashing.

If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical outlet.

Advisories and Warnings for Transporting or Storing the Printer

When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak.

Before transporting the printer, make sure that the print head is in the home (far right) position.

Advisories and Warnings for Using the Printer with a Wireless Connection

Radio waves from this printer may negatively affect the operation of medical electronic equipment, causing them to malfunction. When using this printer inside medical facilities or near medical equipment, follow directions from the authorized personnel representing the medical facilities, and follow all posted warnings and directions on the medical equipment.

Radio waves from this printer may negatively affect the operation of automatically controlled devices such as automatic doors or fire alarms, and could lead to accidents due to malfunction. When using this printer near automatically controlled devices, follow all posted warnings and directions on these devices.

Protecting Your Personal Information

If you give the printer to someone else or dispose of it, restore the default network settings by using the printer’s buttons.

Related Information

& “Control Panel” on page 16

User’s Guide

Printer Basics

Printer Basics

Part Names and Functions

User’s Guide

A B

C

Related Information

& “Control Panel” on page 16

User’s Guide

Printer Basics

Control Panel

Buttons and Functions

Functions of Button Combinations

Additional functions are available with different combinations of buttons.

Scan to Computer

+

Press the and buttons simultaneously to run software on a USB-connected computer

Hold down theandbuttons simultaneously to start PIN Code Setup (WPS).

User’s Guide

Printer Basics

Wi-Fi Direct (Simple AP) Setup

+

Hold down the and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.

Turn the printer on while holding down the y button to print the nozzle check pattern.

Related Information

&“Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25

&“Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26

&“Restoring the Network Settings from the Control Panel” on page 34

&“Checking and Cleaning the Print Head — Printer Buttons” on page 91

Lights and Printer Status

Lights on the control panel indicates the status of the printer.

Normal Status

: On

Error Status

When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen. / : On

/ : Flashing

User’s Guide

Printer Basics

User’s Guide

Printer Basics

*1 In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how often this is required will vary according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs. The need for replacement of the pad does not mean that your printer has ceased to operate in accordance with its specifications. The printer will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service provider. The Epson warranty does not cover the cost of this replacement.

User’s Guide

Printer Basics

Related Information

&“Removing Jammed Paper” on page 116

&“Contacting Epson Support” on page 151

&“Installing Applications” on page 110

&“Updating Applications and Firmware” on page 111

User’s Guide

Network Settings

Network Settings

Network Connection Types

You can use the following connection methods.

Wi-Fi Connection

Connect the printer and the computer or smart device to the wireless router. This is the typical connection method for home or office networks where computers are connected by Wi-Fi through the wireless router.

Related Information

&“Connecting to a Computer” on page 22

&“Connecting to a Smart Device” on page 23

&“Making Wi-Fi Settings from the Printer” on page 23

Wi-Fi Direct (Simple AP) Connection

Use this connection method when you are not using Wi-Fi at home or at the office, or when you want to connect the printer and the computer or smart device directly. In this mode, the printer acts as an wireless router and you

User’s Guide

Network Settings

can connect the devices to the printer without having to use a standard wireless router. However, devices directly connected to the printer cannot communicate with each other through the printer.

The printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.

Related Information

& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26

Connecting to a Computer

We recommend using the installer to connect the printer to a computer. You can run the installer using one of the following methods.

Setting up from the website

Access the following website, and then enter the product name. Go to Setup, and then start setting up. http://epson.sn

Setting up using the software disc (only for the models that come with a software disc and users with Windows computers with disc drives.)

Insert the software disc into the computer, and then follow the on-screen instructions.

Selecting the Connection Methods

Follow the on-screen instructions until the following screen is displayed, and then select the connection method of the printer to the computer.

User’s Guide

Network Settings

Select the connection type and then click Next.

Follow the on-screen instructions.

Connecting to a Smart Device

You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the smart device. To use the printer from a smart device, set up from the following website. Access to the website from the smart device that you want to connect to the printer.

http://epson.sn > Setup

Note:

If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the computer first by using the installer.

Making Wi-Fi Settings from the Printer

You can make network settings from the printer’s control panel in several ways. Choose the connection method that matches the environment and conditions that you are using.

If the wireless router supports WPS, you can make settings by using push button setup.

After connecting the printer to the network, connect to the printer from the device that you want to use (computer, smart device, tablet, and so on.)

User’s Guide

Network Settings

Related Information

&“Making Wi-Fi Settings by Push Button Setup” on page 24

&“Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 25

&“Making Wi-Fi Direct (Simple AP) Connection Settings” on page 26

Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following conditions are met, you can set up by using this method.

The wireless router is compatible with WPS (Wi-Fi Protected Setup).

The current Wi-Fi connection was established by pressing a button on the wireless router.

1.Hold down the [WPS] button on the wireless router until the security light flashes.

If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the documentation provided with your wireless router for details.

again. If it still does not work, print a network connection report and check the solution.

User’s Guide

Network Settings

Related Information

&“Checking the Network Connection Status” on page 27

&“When You Cannot Make Network Settings” on page 125

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can connect to an wireless router by using a PIN code that is printed on the network status sheet. You can use this method to set up if an wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless router.

1.Load papers.

4.Use your computer to enter the PIN code (an eight digit number) printed on [WPS-PIN Code] column of the network status sheet into the wireless router within two minutes.

Note:

See the documentation provided with your wireless router for details on entering a PIN code.

printer and try again. If it still does not work, print a network connection report and check the solution.

Related Information

&“Printing a Network Status Sheet” on page 33

&“Checking the Network Connection Status” on page 27

&“When You Cannot Make Network Settings” on page 125

User’s Guide

Network Settings

Making Wi-Fi Direct (Simple AP) Connection Settings

This method allows you to connect the printer directly to devices without a wireless router. The printer acts as a wireless router.

Note:

If you enable Wi-Fi Direct once, it remains enabled unless you restore the default network settings.

2.Load papers.

The network status sheet is printed. You can check the SSID and Password for Wi-Fi Direct (Simple AP) on this sheet.

Password for Wi-Fi Direct (Simple AP) are not printed on this report.

4.On the computer’s network connection screen or the smart device’s Wi-Fi screen, select the same SSID shown on the network status sheet to connect.

5.Enter the password printed on the network status sheet into the computer or smart device. You can confirm the status of Wi-Fi Direct on the network status sheet.

User’s Guide

Network Settings

Note:

When you connect from a smart device using Wi-Fi Direct connection (for Android)

Press the button to allow the connection request.

Press the button if you want to reject the connection request.

See Tips on the following website for more details.

http://epson.sn > Support

Related Information

&“Printing a Network Status Sheet” on page 33

&“Checking the Network Status Using Network Light” on page 27

&“When You Cannot Connect Using Wi-Fi Direct (Simple AP) Connection” on page 127

Checking the Network Connection Status

You can check the network connection status in the following way.

Checking the Network Status Using Network Light

You can check the network connection status using the network light on the printer’s control panel.

Related Information

& “Control Panel” on page 16

Printing a Network Connection Report

You can print a network connection report to check the status between the printer and the wireless router.

1.Load papers.

2.Press the button.

The network connection report is printed.

Related Information

& “Messages and Solutions on the Network Connection Report” on page 28

User’s Guide

Network Settings

Messages and Solutions on the Network Connection Report

Check the messages and error codes on the network connection report, and then follow the solutions.

a.Error code

b.Messages on the Network Environment

Related Information

&“E-1” on page 29

&“E-2, E-3, E-7” on page 29

&“E-5” on page 30

&“E-6” on page 30

&“E-8” on page 30

&“E-9” on page 30

&“E-10” on page 31

&“E-11” on page 31

&“E-12” on page 31

&“E-13” on page 32

&“Message on the Network Environment” on page 32

User’s Guide

Network Settings

E-1

Solutions:

Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device.

Make sure your hub or other network device is turned on.

If you want to connect the printer by Wi-Fi, make Wi-Fi settings for the printer again because it is disabled.

E-2, E-3, E-7

Solutions:

Make sure your wireless router is turned on.

Confirm that your computer or device is connected correctly to the wireless router.

Turn off the wireless router. Wait for about 10 seconds, and then turn it on.

Place the printer closer to your wireless router and remove any obstacles between them.

If you have entered the SSID manually, check if it is correct. Check the SSID from the Network Status part on the network connection report.

If an wireless router has multiple SSIDs, select the SSID that is displayed. When the SSID is using a noncompliant frequency, the printer does not display them.

If you are using push button setup to establish a network connection, make sure your wireless router supports WPS. You cannot use push button setup if your wireless router does not support WPS.

Makes sure your SSID uses only ASCII characters (alphanumeric characters and symbols). The printer cannot display an SSID that contains non-ASCII characters.

Makes sure you know your SSID and password before connecting to the wireless router. If you are using a wireless router with its default settings, the SSID and password are located on a label on the wireless router. If you do not know your SSID and password, contact the person who set up the wireless router, or see the documentation provided with the wireless router.

If you are connecting to an SSID generated from a tethering smart device, check for the SSID and password in the documentation provided with the smart device.

If your Wi-Fi connection suddenly disconnects, check for the conditions below. If any of these conditions are applicable, reset your network settings by downloading and running the software from the following website.

http://epson.sn > Setup

Another smart device was added to the network using push button setup.

The Wi-Fi network was set up using any method other than push button setup.

Related Information

&“Connecting to a Computer” on page 22

&“Making Wi-Fi Settings from the Printer” on page 23

User’s Guide

Network Settings

E-5

Solutions:

Make sure the wireless router’s security type is set to one of the following. If it is not, change the security type on the wireless router, and then reset the printer’s network settings.

WEP-64 bit (40 bit)

WEP-128 bit (104 bit)

WPA PSK (TKIP/AES)*

WPA2 PSK (TKIP/AES)*

WPA (TKIP/AES)

WPA2 (TKIP/AES)

*WPA PSK is also known as WPA Personal. WPA2 PSK is also known as WPA2 Personal.

E-6

Solutions:

Check if MAC address filtering is disabled. If it is enabled, register the printer’s MAC address so that it is not filtered. See the documentation provided with the wireless router for details. You can check the printer’s MAC address from the Network Status part on the network connection report.

If your wireless router is using shared authentication with WEP security, make sure the authentication key and index are correct.

If the number of connectable devices on the wireless router is less than the number of network devices that you want to connect, make settings on the wireless router to increase the number of connectable devices. See the documentation provided with the wireless router to make settings.

E-8

Solutions:

Enable DHCP on the wireless router if the printer’s Obtain IP Address setting is set to Auto.

If the printer’s Obtain IP Address setting is set to Manual, the IP address you manually set is invalid due to out of range (for example: 0.0.0.0). Set a valid IP address from the printer’s control panel or by using Web Config.

Related Information

& “Printing a Network Status Sheet” on page 33

E-9

Solutions:

Check the following.

Devices are turned on.

User’s Guide

Network Settings

You can access the Internet and other computers or network devices on the same network from the devices you want to connect to the printer.

If still does not connect your printer and network devices after confirming the above, turn off the wireless router. Wait for about 10 seconds, and then turn it on. Then reset your network settings by downloading and running the installer from the following website.

http://epson.sn > Setup

Related Information

& “Connecting to a Computer” on page 22

E-10

Solutions:

Check the following.

Other devices on the network are turned on.

Network addresses (IP address, subnet mask, and default gateway) are correct if you have set the printer’s Obtain IP Address to Manual.

Reset the network address if they are incorrect. You can check the IP address, subnet mask, and default gateway from the Network Status part on the network connection report.

If DHCP is enabled, change the printer’s Obtain IP Address setting to Auto. If you want to set the IP address manually, check the printer’s IP address from the Network Status part on the network connection report, and then select Manual on the network settings screen. Set the subnet mask to [255.255.255.0].

If still does not connect your printer and network devices, turn off the wireless router. Wait for about 10 seconds, and then turn it on.

E-11

Solutions:

Check the following.

The default gateway address is correct if you set the printer’s TCP/IP Setup setting to Manual.

The device that is set as the default gateway is turned on.

Set the correct default gateway address. You can check the default gateway address from the Network Status part on the network connection report.

E-12

Solutions:

Check the following.

Other devices on the network are turned on.

The network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them manually.

User’s Guide

Network Settings

The network addresses for other devices (subnet mask and default gateway) are the same.

The IP address does not conflict with other devices.

If still does not connect your printer and network devices after confirming the above, try the following.

Turn off the wireless router. Wait for about 10 seconds, and then turn it on.

Make network settings again using the installer. You can run it from the following website. http://epson.sn > Setup

You can register several passwords on a wireless router that uses WEP security type. If several passwords are registered, check if the first registered password is set on the printer.

Related Information

&“Printing a Network Status Sheet” on page 33

&“Connecting to a Computer” on page 22

E-13

Solutions:

Check the following.

Network devices such as a wireless router, hub, and router are turned on.

The TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network may differ from the network for other devices.)

If it still does not work after checking the above, try the following.

Turn off the wireless router. Wait for about 10 seconds, and then turn it on.

Make network settings on the computer that is on the same network as the printer using the installer. You can run it from the following website.

http://epson.sn > Setup

You can register several passwords on a wireless router that uses the WEP security type. If several passwords are registered, check if the first registered password is set on the printer.

Related Information

&“Printing a Network Status Sheet” on page 33

&“Connecting to a Computer” on page 22

Message on the Network Environment

User’s Guide

Printing a Network Status Sheet

You can check the detailed network information by printing it such as the maximum number of devices you can connect by Wi-Fi Direct (simple AP).

Replacing or Adding New Wireless Routers

If the SSID changes due to the replacement of a wireless router, or a wireless router is added and a new network environment is established, re-set the Wi-Fi settings.

Related Information

& “Changing the Connection Method to a Computer” on page 33

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.

Setting up from the website

Access the following website, and then enter the product name. Go to Setup, and then start setting up. http://epson.sn

Setting up using the software disc (only for the models that come with a software disc and users with Windows computers with disc drives.)

Insert the software disc into the computer, and then follow the on-screen instructions.

Selecting Change the Connection Methods

Follow the on-screen instructions until the following screen is displayed.

User’s Guide

Network Settings

Select Set up Printer connection again (for new network router or changing USB to network, etc.) on the Install Software screen, and then click Next.

Restoring the Network Settings from the Control Panel

You can restore all network settings to their defaults.

1.Turn the printer off.

User’s Guide

Loading Paper

Loading Paper

Paper Handling Precautions

Read the instruction sheets supplied with the paper.

Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the printable side.

If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause paper jams and smears on the printout.

Do not use paper that is wavy, torn, cut, folded, damp, too thick, too thin, or paper that has stickers stuck to it. Using these types of paper causes paper jams and smears on the printout.

Fan and align the edges of the envelopes before loading. When the stacked envelopes are puffed up with air, press them down to flatten them before loading.

Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the printout.

Do not use envelopes with adhesive surfaces on the flaps or window envelopes.

Avoid using envelopes that are too thin, as they may curl during printing.

Related Information

& “Printer Specifications” on page 143

User’s Guide

Loading Paper

Available Paper and Capacities

Note:

The paper size displayed differs depending on the driver.

Genuine Epson Paper

Epson recommends using genuine Epson paper to ensure high-quality printouts.

Note:

The availability of paper varies by location. For the latest information on paper available in your area, contact Epson support.

Paper suitable for printing documents

Paper suitable for printing documents and photos

Paper suitable for printing photos

*Load one sheet of paper at a time if the paper does not feed correctly or if the printout has uneven colors or smears.

Related Information

&“Paper for Borderless Printing” on page 37

&“Paper for 2-Sided Printing” on page 38

User’s Guide

Loading Paper

Commercially Available Paper

Plain papers

*Load one sheet of paper at a time if the paper does not feed correctly or if the printout has uneven colors or smears.

Envelopes

Related Information

&“Paper for Borderless Printing” on page 37

&“Paper for 2-Sided Printing” on page 38

Paper for Borderless Printing

Genuine Epson Paper

Epson Bright White Ink Jet Paper

Epson Photo Quality Ink Jet Paper

Epson Matte Paper-Heavyweight

Epson Ultra Glossy Photo Paper

Epson Premium Glossy Photo Paper

Epson Premium Semigloss Photo Paper

Epson Photo Paper Glossy

Commercially Available Paper

Plain paper, Copy paper (A4, Letter, User Defined)

User’s Guide

Loading Paper

Paper for 2-Sided Printing

Genuine Epson Paper

Epson Bright White Ink Jet Paper

Commercially Available Paper

Plain paper, Copy paper

List of Paper Type

To obtain optimum printing results, select the paper type that suits the paper.

Loading Paper in the Rear Paper Feed

1.Open the feeder guard, extend the paper support, and then tilt it backwards.

User’s Guide

Loading Paper

2.Slide the edge guide to the left.

3.Load paper vertically along the right side of the rear paper feed with the printable side facing up.

cImportant:

Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load above the line indicated by the triangle symbol on the edge guide.

Envelopes

User’s Guide

Loading Paper

Pre-punched paper

Note:

Load a single sheet of paper without binding holes at the top or the bottom.

Adjust the print position of your file to avoid printing over the holes.

4.Slide the edge guide to the edge of the paper, and then close the feeder guard.

5.Slide out the output tray.

Note:

Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may decline.

Related Information

& “Paper Handling Precautions” on page 35

User’s Guide

Loading Paper

& “Available Paper and Capacities” on page 36

User’s Guide

Placing Originals on the Scanner Glass

Placing Originals on the Scanner Glass

cImportant:

When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.

1.Open the document cover.

2.Remove any dust or stains on the surface of the scanner glass using a soft, dry, clean cloth.

Note:

If there is any trash or dirt on the scanner glass, the scanning range may expand to include it, so the image of the original may be displaced or reduced.

3.Place the original face-down and slide it to the corner mark.

Note:

A range of 1.5 mm from the corner of the scanner glass is not scanned.

User’s Guide

Placing Originals on the Scanner Glass

4.Close the cover gently.

cImportant:

Do not apply too much force to the scanner glass or the document cover. Otherwise, they may be damaged.

5.Remove the originals after scanning.

Note:

If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.

Placing Multiple Photos for Scanning at the Same Time

You can scan multiple photos at the same time and save each image, using Photo Mode in Epson Scan 2. Place the photos 4.5 mm away from the horizontal and vertical edges of the scanner glass, and place them at least 20 mm apart from each other. The photos should be larger than 15×15 mm.

Note:

Enable the Thumbnail check box at the top of the preview window.

User’s Guide

Printing

Printing

Printing from a Computer

Printing Basics — Windows

Note:

See the online help for explanations of the setting items. Right-click an item, and then click Help.

Operations differ depending on the application. See the application’s help for details.

1.Load paper in the printer.

2.Open the file you want to print.

3.Select Print or Print Setup from the File menu.

4.Select your printer.

5.Select Preferences or Properties to access the printer driver window.

6.Make the following settings.

Document Size: Select the paper size you loaded in the printer.

Borderless: Select to print with no margins around the image.

In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are printed around the edges of the paper. Click Settings to select the amount of enlargement.

Orientation: Select the orientation you set in the application.

User’s Guide

Printing

Paper Type: Select the type of paper you loaded.

Quality: Select the print quality.

Selecting High provides higher quality printing, but the printing speed may be slower.

Color: Select Grayscale when you want to print in black or shades of gray.

Note:

When printing on envelopes, select Landscape as the Orientation setting.

7.Click OK to close the printer driver window.

8.Click Print.

Related Information

&“Available Paper and Capacities” on page 36

&“Loading Paper in the Rear Paper Feed” on page 38

&“Guide to Windows Printer Driver” on page 102

&“List of Paper Type” on page 38

Printing Basics — Mac OS

Note:

Explanations in the section use TextEdit as an example. Operations and screens differ depending on the application. See the application’s help for details.

1.Load paper in the printer.

2.Open the file you want to print.

User’s Guide

Printing

3.Select Print from the File menu or another command to access the print dialog. If necessary, click Show Details or d to expand the print window.

4.Make the following settings.

Printer: Select your printer.

Presets: Select when you want to use the registered settings.

Paper Size: Select the paper size you loaded in the printer. When printing with no margins, select a «borderless» paper size.

Orientation: Select the orientation you set in the application.

Note:

If the above setting menus are not displayed, close the print window, select Page Setup from the File menu, and then make settings.

When printing on envelopes, select landscape orientation.

User’s Guide

Printing

5.Select Print Settings from the pop-up menu.

Note:

On OS X Mountain Lion or later, if the Print Settings menu is not displayed, the Epson printer driver has not been installed correctly.

Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and then add the printer again. See the following to add a printer.

http://epson.sn

6.Make the following settings.

Media Type: Select the type of paper you loaded.

Print Quality: Select the print quality.

Selecting Fine provides higher quality printing, but the printing speed may be slower.

Expansion: Available when selecting a borderless paper size.

In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are printed around the edges of the paper. Select the amount of enlargement.

Grayscale: Select to print in black or shades of gray.

7.Click Print.

Related Information

&“Available Paper and Capacities” on page 36

&“Loading Paper in the Rear Paper Feed” on page 38

MANUALSCAT | RU

Вопросы и ответы

У вас есть вопрос о Epson Expression Home XP-2100, но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для Epson Expression Home XP-2100. Пожалуйста, убедитесь, что вы опишите свои трудности с Epson Expression Home XP-2100 как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.