Mt6100i руководство по эксплуатации

1, MT-600/8000 series MT-610i / MT-6100i / MT-8100i Installation Instruction 0 1.0 Installation and Startup Guide 7 Install Environment Where Used The MT-600/8000 Series is designed for industrial. The temperature range of operating is from 32 to 113 °F (0 to 45 °C) , as majority of industrial environments. It may not be suitable for using in certain outdoor applications. Please consult…

2, weintek MT-6100i 9 2.1.2 Making a NEMA-4 Mounting Panel Details The unit can be mounted into panels with a depth of 4”(105mm). It is recommended that the unit be mounted on the front panel of a steel enclosure, through an appropriate opening. Allow a clearance of 1”(25mm) around the sides of the unit for mounting hardware. Allow clearance for cable connections to the back of the unit. Unit…

3, If wiring is to be exposed to lightning or surges, use appropriate surge suppression devices. Keep AC, high energy, and rapidly switching DC wiring separate from signal wires. Equip ungrounded DC supplies with a resistor and capacitor in parallel to earth ground. This provides a path for static and high frequency dissipation. Typical values to use are 1MOhm…

4, If provision is required for changing programs while the equipment is in operation, consideration should be given to the use of locks or other means of assuring that only authorized personnel can make such changes. These recommendations are intended as safeguards against the failure of critical components and the effects of such failures or the inadvertent errors that might be intro…

5, * The Com1 RS232/RS485 2wire/4wire, Com3 RS232/RS485 mode can be set by CECP. (In the Windows CE desktop) 16 2.3.3 USB Host port USB 1.1 Host interface supports USB mouse, keyboard, USB Flash Drive and printer. While using external hard drive, please use external power supply. Do not use USB port to charge external device. (MT610i and MT8100i have no front panel USB port.) 17 2.3.4 USB c…

6, 19 2.3.6 Dip Switch 20 SW1 21 SW2 22 SW3 23 SW4 24 Mode 25 ON 26 OFF 27 OFF 28 OFF 29 Touch Screen Calibrate mode 30 OFF 31 ON 32 OFF 33 OFF Hide MT8000 System Setting Bar 34 OFF 35 OFF 36 ON 37 OFF 38 Boot Loader mode 39 OFF 40 OFF 41 OFF 42 ON 43 Reserve 44 OFF 45 OFF 46 OFF 47 OFF 48 Normal z Touch Screen Calibrate and Reset Password mode: In this mode when you power on…

7, 7 Compatibility Standards The MT-600/8000 has been designed to meet electromagnetic compatibility for industrial environments. z EN 55022: 2006 Class A z EN 61000-3-2: 2006 z EN 61000-3-3: 1995+A1: 2001+A2: 2005 z EN 55024: 1998+A1: 2001+A2: 2003 2.5 Limited Liability Warranty Weintek products include the isolated power supply are covered by a limited liability warra…

8, weintek MT-6100i 3 4.0 Dimensions of MT610i / MT-6100i / MT-8100i g E:LOGOmark複製 -2.jpgE:LOGOmark複製 -4.jpg COM1 [RS232] COM2 [RS232] COM3 [RS485] COM3 [RS232] COM1 [RS485 2/4W] RESET FUSE GND +24V DIP SW FUSE5X20 c d f f f f e h k i j b 212.97mm [8.38″] 270.97mm [10.67″] 42.71mm [1.68″] 7.2mm [0.28″] 257mm [10.12″] 199mm [7.83″]49.78mm [1.96″] R 2 m m [ R 0 . …

www.necdisplay.comBusiness DesktopTaking care of business never looked so stylish. With its NEC MultiSync 5 Series, which boasts cutting-edge technologies and dynamic design accents, NEC Display Solutions gives you the abil-ity to increase your productivity with monitors that add a modern flair to your desktop. The series includes the feature-rich 17” NEC M …

LCD175VX — MultiSync — 17″ LCD Monitor 2

46″ Wide VGA Plasma Monitor BDS4621/27Convenient adaptability•Multiple PC input formats up to WXGA• Built-in audio for quality sound performance• Zoom function supports video wall matrix • Quiet and reliable fanless operation•Portrait mounting version also availableOutstanding front of screen performance• High brightness and contrast ratio looks great anywhere• High s …

BDS4621/27 2

Life’s GoodPLASMA TVOWNER’S MANUAL42PQ20 42PQ6050PQ20 50PQ6042PQ30 50PS3050PQ30 50PS6060PS60Please read this manual carefully before operatingyour set and retain it for future reference.The model and serial number of the TV is locatedon the back and one side of the TV.Record it below should you ever need service.Model:This product qualifies for ENERGY STARin the «fac-tory defa …

42PQ20 Series 117

MT-600/8000 series MT-610i / MT-6100i / MT-8100i Installation Instruction 0 1.0 Installation and Startup Guide 7 Install Environment Where Used The MT-600/8000 Series is designed for industrial. The temperature range of operating is from 32 to 113 °F (0 to 45 °C) , as majority of industrial environments. It may not be suitable for using in certain outdoor applications. Please consult the factory for advised usage in outdoor applications. NEMA Rating The MT-600/8000 Series front beze

19 2.3.6 Dip Switch 20 SW1 21 SW2 22 SW3 23 SW4 24 Mode 25 ON 26 OFF 27 OFF 28 OFF 29 Touch Screen Calibrate mode 30 OFF 31 ON 32 OFF 33 OFF Hide MT8000 System Setting Bar 34 OFF 35 OFF 36 ON 37 OFF 38 Boot Loader mode 39 OFF 40 OFF 41 OFF 42 ON 43 Reserve 44 OFF 45 OFF 46 OFF 47 OFF 48 Normal z Touch Screen Calibrate and Reset Password mode: In this mode when you power on the MT8000 series, the screen will display a “+” sign upper-left of the screen. Use

If wiring is to be exposed to lightning or surges, use appropriate surge suppression devices. Keep AC, high energy, and rapidly switching DC wiring separate from signal wires. Equip ungrounded DC supplies with a resistor and capacitor in parallel to earth ground. This provides a path for static and high frequency dissipation. Typical values to use are 1MOhm and 4700pF. Caution ! To prevent the HMI from becoming damaged or hav

9 2.1.2 Making a NEMA-4 Mounting Panel Details The unit can be mounted into panels with a depth of 4”(105mm). It is recommended that the unit be mounted on the front panel of a steel enclosure, through an appropriate opening. Allow a clearance of 1”(25mm) around the sides of the unit for mounting hardware. Allow clearance for cable connections to the back of the unit. Unit depth may vary according to cable type used. Typically, plan a depth to accommodate at least 4”(105mm) behind the panel. NEMA-4 Mounti

If provision is required for changing programs while the equipment is in operation, consideration should be given to the use of locks or other means of assuring that only authorized personnel can make such changes. These recommendations are intended as safeguards against the failure of critical components and the effects of such failures or the inadvertent errors that might be introduced if programs are changed while the equipment is in operation. z The ICS 3

7 Compatibility Standards The MT-600/8000 has been designed to meet electromagnetic compatibility for industrial environments. z EN 55022: 2006 Class A z EN 61000-3-2: 2006 z EN 61000-3-3: 1995+A1: 2001+A2: 2005 z EN 55024: 1998+A1: 2001+A2: 2003 2.5 Limited Liability Warranty Weintek products include the isolated power supply are covered by a limited liability warranty from defects in material and workmanship. This warranty does not apply: (a) if, in the

* The Com1 RS232/RS485 2wire/4wire, Com3 RS232/RS485 mode can be set by CECP. (In the Windows CE desktop) 16 2.3.3 USB Host port USB 1.1 Host interface supports USB mouse, keyboard, USB Flash Drive and printer. While using external hard drive, please use external power supply. Do not use USB port to charge external device. (MT610i and MT8100i have no front panel USB port.) 17 2.3.4 USB client port It can use Mini USB cable (RZCMT6100) to download projects fro