Мультиварка vitesse vs 529 инструкция по применению

нет отзывов

• « Назад

  Ctrl + ←

• Вперёд »

  Ctrl + →

Мануал подходит для устройств

• ViTESSE VS-529

NOU S VI VON S SA IN

We l ive hea lth y

MULTI COOKER

МУЛЬТИВАРКА

РИС

Гречка

Молочная Каша

Мясо

Паста

Отсрочка

Старта

Отмена

ВКЛ / ВЫКЛ

“Vitesse France S.A.R.L” (Витессе, Франция)
91 Руе Де Фоборг Сант Хонор, Париж 75008, Франция
Сделано в Китае

www.vitesse.ru

VS-529

www.vitesse.ru

DEAR CUSTOMER! YOU HAVE MADE AN EXCELLENT DECISION!

ViTESSE Home trade mark offers you an exclusive, high quality range of
appliances for your ultimate home luxury and healthy living.

SAFETY INSTRUCTIONS

Read the operating instructions carefully before putting the appliance into
operation and keep the instructions including the warranty, the receipt and, if
possible, the box with the internal packing. If you give this device to other people,
please also pass on the operating instructions.

SAFETY AND PRECAUTIONS

When using this appliance, follow the instructions below.
When used correctly, it will serve you for years.

Before connecting the outlet please cross check the supply voltage with the
supply voltage of the device. This can be found in technical data or on the name
plate.

 If you use an extension cord, make sure it is designed for the power

consumption of the device. Different voltage can cause electric shock or fire
cable.

 For safety, the appliance is to be kept and used at a sturdy and ground

surface. Otherwise, it would not meet the requirements of protection against
electric shock.

 If you want to disconnect the unit from the wall outlet, then remove the power

cord with hands on the plug, not the cord. Otherwise, it can lead to rupture of
the cable or electric shock. Unplug this apparatus after use and during
cleaning or moving.

 Do not lay the power cord around sharp corners and edges, close to the heat

source (gas or electric stove).

 This can cause problems that do not meet the terms of the warranty.

 Make sure that the cord will not twist or bend over the edge of the table. Place

the unit on a dry level surface. Please comply with generally accepted safety
rules when working with the device.

 Do not use the appliance and packaging materials for children to play.
 Do not allow children near the appliance. Keep the product out of reach of their

place.

 It is forbidden to use the appliance for any failures. The manufacturer is not

liable for damage caused by non-compliance with safety and technician rules
of use.

 Do not allow children to use the device until they are explained and

understood the instructions for safe operation.

 D o not leave the appliance plugged unattended.
 Do not submerge the device in water and do not use it in high humidity areas. It

is forbidden to use the unit in the open air; there is risk of damage due to
moisture inside.

 Do not use the device at any failures. If it is faulty, disconnect it from the

network, removing the plug from the outlet and contact an authorized service
center.

 Never try to repair the unit, or unauthorized modifications to the instrument. All

maintenance and repair should be performed by an authorized service center.
Unprofessional work could damage, personal injury and property damage.

 Use of the device for purposes other than the above, is a violation of the

proper operation of the device.

Operation should be carried out only in the domestic environment; the device

is not intended for industrial use.

 When the appliance is operating — do not touch the body and the cover and

take care of the face and hands from the steam coming out of the valve.

 Do not operate the appliance without the empty bowl or cup. Never touch the

interior surfaces of the heated device.

P/1 P/2

SCHEME OF THE UNIT

www.vitesse.ru

Never connect to a power outlet other than specified
power limits

Place the appliance on a flat, dry, stable surface away
from sources of heat.

Never place the inner tank on the direct fire.

Keep the device away from children.
Children can use the device under the supervision
of Adults. Do not let them play with the device.

Do not bring your hands or face close to the holes
for the steam on the top cover.

PARTS NAME

2

1

6

5

12

11

18

15

3

4

7

8

10

9

17

13

Do not block the Steam openings with towel or other items,
to avoid deformation and discoloration device.

Do not immerse in water or other liquids.
If you are not using the device, disconnect it from the mains.

Do not pull the power cord, hold the plug. Never bend or twist
the power cord. If the power cord is damaged — do not use the
device; contact an authorized service center for repairs. This
device is not intended for use by persons with reduced
physical, sensory or mental capabilities, a lack of knowledge or
experience.

P/3 P/4

14

1. Indication Program STEAM

2. Indication Program DEEP FRY

3. Indication Program STEW

4. Indication Program RICE

5. Indication Program CAKE

6. Indication Program PILAF

7. Indication Program MILK PORRIDGE

8. Indication Program BUCKWHEAT

9. Indication Program PASTA

16

10. Indication Program ROASTED MEAT

11. Indication Program YOGURT

12. Indication Program SOUP

13. START Button

14. ON / OFF Button*

15. KEEP WARM / CANCEL Button

16. MENU Button

17. COOKING TIME Button

18. PRESET TIME Button

* As a Safety Feature Press the On / Off Button once to on the unit and press the

On / Off Button Continuously for 3 Seconds to Off the unit.

www.vitesse.ru

HOW TO OPERATE THE APPLIANCE

Micro-Computer Multi Cooker has many features! You can cook meals and
soups, fried, steamed (vegetables, fish, meat), stew, bake and prepare
yogurt. Regardless of the choice of the function, after cooking you can keep
the food warm.

Before switching on

1. Read the instructions carefully and follow these instructions mentioned.

2. Open the package. Remove all accessories and manual.

3. Open the cover of the Multi-Cooker by pressing the open button.

4. Inner bowl (pan) has non-stick coating that helps to avoid burning your food.
Clean the inside of the bowl with a soft sponge for dishes. After washing, wipe
the device.

5. Install all of the components.

6. Before preparing the internal and external parts of the Multi-Cooker must be
clean. Also make sure that between the inner pot and the heating surface
there are no objects.

7. Make sure the lid is tightly closed.

8. Turn On the outlet.

CAUTION: Do not connect the appliance to the outlet, if it does not meet the
above guidelines.

USING INSTRUCTION

PROGRAM “RICE”

Measure the rice recipe. Before Cooking — Wash it with clean water. Prepare the
remaining ingredients, wash them clean, cut & Keep Ready.

1. Put the rice (or grain) and seasoning in a bowl, cover with water. Can use your
recipe rice based on proposed sequence. Make sure that all the ingredients
(including liquid) are the marking MAX. (is located inside the bowl).

2. Insert the Bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element. Close the cover until it
clicks.

NOTE: If the cover is not completely closed, the program will not work

correctly.

3. Connect the device to the mains output.

4. Press the SELECT PROGRAM button and choose the Program “Rice”

5. Press the START button to begin the cooking process, the display will flash:

0045. It is the preset time for this program. The Time can be adjustable by
pressing the Cooking Time button and it can be adjusted at an interval of 30­60 Mins

6. The cooking time is set by microprocessor and cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.

7. At the end of the cooking process the Multi-Cooker will automatically switch to
Keep Warm mode: RICE Function LED goes out and Keep Warm LED will
keep flashing.

8. Click on the keep warm / CANCEL to turn off the appliance and open the lid.

9. Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.

10. Disconnect the unit from the mains.

PROGRAM «PILAF»

1. Measure the rice with the measuring cup based on the prescription. Wash it
with clean water before use. Prepare the remaining ingredients, wash them
clean and cut.

2. Put all ingredients in a bowl in accordance with our recommendations:

Vegetable oil 60 g
Lamb / Pork 400-500 g
Carrots 150g
Onion 150g
Rice 260 g
Water or broth 650 ml
Salt and spices to taste
You can also use your own recipe pilaf, following the proposed sequence of

actions and recommendations for the quantity. Make sure that all the
ingredients (including liquid) are the marking MAX. (is located inside the
bowl).

3. Insert the Bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element. Close the cover until it
clicks.

NOTE: If the cover is not completely closed, the program will not work

correctly.

P/5 P/6

www.vitesse.ru

4. Close the Cover until it clicks. Connect the device to the mains.

5. Press “Select Program” button and choose the Pilaf Function

6. Press the START button to begin the cooking process, the display will flash:

0055. It is the preset time for this program. The Time can be adjustable by
pressing the Cooking Time button and it can be adjusted at an interval of 30­65 Mins

7. The cooking time is set by microprocessor and cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.

8. At the end of the cooking process the Multi-Cooker will automatically switch to
Keep Warm mode: PILAF Function LED goes out and Keep Warm LED will
keep flashing.

9. Click on the keep warm / CANCEL to turn off the appliance and open the lid.

10. Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.

11. Disconnect the unit from the mains.

PROGRAM «DEEP FRY»

1. Prepare the necessary ingredients and keep ready.

2. Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.

3. Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.

4. Close the cover until it clicks. If the lid is not closed properly, the program will
be on the preparation work correctly.

5. Connect the device to the mains.

6. Press “Select Program” button and choose the Deep Fry Function

7. Press the START button to begin the cooking process, the display will flash:

0030. It is the preset time for this program. The Time can be adjustable by
pressing the Cooking Time button and it can be adjusted at an interval of 10­99 Mins

8. The cooking time is set by microprocessor and cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.

9. Disconnect the unit from the mains.

cooking.

2. Put all the ingredients in a bowl according to our recommendations. You can
also use your recipe milk porridge, following the proposed sequence of
actions and recommendations for the quantity. Make sure that all the
ingredients (including liquid) were below 2/5th of the bowl.

3. Insert the Bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element. Close the cover until it
clicks.

NOTE: If the cover is not completely closed, the program will not work

correctly.

4. Close the Cover until it clicks. Connect the device to the mains.

5. Press “Select Program” button and choose the Milk/Porridge Function

6. Press the START button to begin the cooking process, the display will flash:

0030. It is the preset time for this program. The Time can be adjustable by
pressing the Cooking Time button and it can be adjusted at an interval of 10­60 Mins

The cooking time is set by microprocessor and the cooking process will end

automatically, but you can stop it by pressing keep warm / CANCEL.

7. At the end of the cooking process the Multi-Cooker will automatically switch to
Keep Warm mode: Milk / Porridge Function LED goes out and Keep Warm
LED will keep flashing.

8. Click on the keep warm / CANCEL to turn off the appliance and open the lid.

9. Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.

10. Disconnect the unit from the mains

PROGRAM «BUCKWHEAT»

1. Measure the cereal as per the desired prescription. Rinse with clean with
water before cooking.

2. Put all the ingredients in a bowl according to our recommendations.

PROGRAM «MILK PORRIDGE»

1. Measure the cereal up to 2/5th of the bowl. Rinse with clean with water before

P/7 P/8

Measuring cup estimates are:

— 130g cereal — 1 cup

www.vitesse.ru

— 180 ml of water — 1 cup
You can also use your recipe, following the proposed sequence of actions and

recommendations for the quantity. Make sure that all the ingredients
(including liquid) were below the MAX, is located inside the bowl.

3. Insert the Bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element. Close the cover until it
clicks.

NOTE: If the cover is not completely closed, the program will not work

correctly.

4. Close the Cover until it clicks. Connect the device to the mains.

5. Press “Select Program” button and choose the Buckwheat Function

6. Press the START button to begin the cooking process, the display will flash:

0050. It is the preset time for this program. The Time can be adjustable by
pressing the Cooking Time button and it can be adjusted at an interval of 10­99 Mins

The cooking time is set by microprocessor and the cooking process will end

automatically, but you can stop it by pressing keep warm / CANCEL.

7. At the end of the cooking process the Multi-Cooker will automatically switch to
Keep Warm mode: Buckwheat Function LED goes out and Keep Warm LED
will keep flashing.

8. Click on the keep warm / CANCEL to turn off the appliance and open the lid.

9. Despite the fact that the appliance is willing to maintain the temperature of
food for 8 hours or more, do not leave food in this mode for a long time, it can
lead to drying of the product.

10. Disconnect the unit from the mains

pressing the Cooking Time button and it can be adjusted at an interval of 10­99 Mins

8. The cooking time is set by microprocessor and the cooking process will end
automatically, but you can stop it by pressing keep warm / CANCEL.

9. Disconnect the unit from the mains.

PROGRAM «STEAM»

1. Pour 500-550 ml water into a bowl.

2. Place the provided Steamer Basket into the bowl, as
shown in the figure.

3. Prepare all the food, wash them and cut. Evenly
spread out in Steamer Basket and insert the cup into
the housing. Gently turn it counter-clockwise, make
sure that the cup is in contact with the heating element.

4. Close the cover until it clicks. If the lid is not closed
properly, the program will be on the preparation work
correctly.

5. Connect the device to the mains.

6. Press “Select Program” button and choose the Steam Function. Automatic
cooking time: 30 Mins.

7. You can change it (in the range from 10 minutes to 99 Minutes) by pressing the
cooking time.

PROGRAM «SOUP»

1. Prepare the necessary ingredients and keep ready.

2. Make sure that all the ingredients (including liquid) were below the MAX, is
located inside the bowl.

3. Insert the cup into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.

4. Close the cover until it clicks. If the lid is not closed properly, the program will
be on the preparation work correctly.

5. Connect the device to the mains.

6. Press “Select Program” button and choose the Soup Function

7. Press the START button to begin the cooking process, the display will flash:

0045. It is the preset time for this program. The Time can be adjustable by

P/9 P/10