Насос перистальтический bt600fc инструкция по применению

Описание товара:

• FC Интеллектуальные дозирующие перистальтические насосы на функции мощны ：
• Функция хранения — функция хранения данных пользователя: (9 наборов данных о наполнении). Исходные данные заполнения можно быстро найти, войдя в интерфейс хранилища одной клавишей. 
• Функция внешнего управления — Выбор нескольких режимов: режим связи, аналоговый режим, педальный переключатель. Предоставлять индивидуальные услуги. 
• Данные функции памяти будут сохранены вовремя после отключения питания. При восстановлении подачи питания насос может запомнить параметр «Настройки» перед отключением питания, что является более безопасным и надежным. 
• Функция калибровки — интеллектуальная калибровка расхода: после установки целевого расхода введите фактическое значение расхода, и система автоматически выполнит калибровку расхода для обеспечения точности расхода 
• Функция полной скорости — одна кнопка для управления работой на полной скорости, используется для быстрого очистка, наполнение и опорожнение трубок и т. д. 
• Функция обратного всасывания — путем установки угла обратного всасывания и скорости обратного всасывания для предотвращения капания жидкости  и обеспечения точности подачи  жидкости. 
• Функция блокировки экрана — дизайн экрана блокировки, защита от ошибок, более безопасное приложение. 
• Функция отображения анимации рабочего интерфейса в реальном времени показывает рабочее  состояние и  рабочие параметры .
• Функция сенсорного экрана. Цветной ЖК-экран с диагональю 3,5 дюйма (опционально на английском и китайском языках), управление с помощью сенсорного экрана, интуитивно понятное и интеллектуальное.
•  Цельная конструкция корпуса — корпус из нержавеющей стали，прочный  и  долговечный  , цельный многогранный цельный корпус, длительный срок службы, высокая стоимость.

Множественный режим управления: гибкий режим управления: с сенсорным экраном, ключом и режимом внешнего управления, удобный для пользователей по выбору использования; 
Несколько головок насоса: на насос можно установить различные головки: серии YZ, серии BZ, могут быть соединены последовательно для удовлетворения различных требований к потоку; 

• Page 1
  Operation Manual For Basic Variable-Speed Peristaltic Pump BT100S, BT300S, BT600S BAODING LEAD FLUID TECHNOLOGY CO.,LTD…
• Page 2
  Safety Cautions Danger: Please use correct AC power voltage source shown on the sticker attached on the equipment to avoid any damage. Please do not open the case. High voltages exist and are accessible. Use extreme caution when servicing internal components. For maintenance, please contact the manufacturer or distributor directly.

• Page 3: Table Of Contents

  Contents 1 Introduction ………………….1 2 Functions and Features ………………1 3 Components and Connectors …………….3 4 Display Panel and Operating Keypads …………4 4.1 Keypad ………………… 4 4.2 Digital Display ………………5 5 Parameter Settings……………….. 7 6 External Control Interface …………….10 7 Operation Instructions ………………

• Page 4: Introduction

  • BT300S, flowrate0.006-1600 mL/min, speed0.1-350 rpm • BT600S, flow rate0.006-2900 mL/min, speed0.1-600 rpm 2 Functions and Features Advantage of peristaltic pump: Peristaltic pump can handle extremely viscous fluids, abrasive slurries and corrosive fluids. There is no seals in contact with the medium pumped and no valves to clog.

• Page 5
  LEAD FLUID TECHNOLOGY CO.,LTD. • 0.5% high precision rotating speed control with 0.1 rpm speed resolution when speed is between 0-100 rpm, 1 rpm speed resolution when speed is between 100-600 rpm. • External logic level signal can control start/stop, direction and dispense functions;…

• Page 6: Components And Connectors

  BT/S Variable-Speed Peristaltic Pump 3 Components and Connectors Handle LCD Display Keypad Coupler Pump Head Holder DB15 External Control Interface Power Switch Cooling Fan Power Connector Fuse Figure 1. Components and Connectors Tel：0312-3250677 3250877 3250977 Fax：0312-3250877-804…

• Page 7: Display Panel And Operating Keypads

  LEAD FLUID TECHNOLOGY CO.,LTD. 4 Display Panel and Operating Keypads Figure 2.Display Panel 4.1 Keypad UP Key. When press it shortly, the last digit of the value will increase 1. Hold the key to increase the value quickly. DOWN Key. When press it shortly, the last digit of the value will decrease 1.

• Page 8: Digital Display

  BT/S Variable-Speed Peristaltic Pump PRIME key. Press the key to run pump at maximum allowed speed in the direction shown on the display. Press again to return to the previous state. START/STOP key. Press to start or stop the drive. 4.2 Digital Display 32.5rpm Figure 3.Display screen…

• Page 9
  LEAD FLUID TECHNOLOGY CO.,LTD. and speed. • Logic Level 2 Control Mode (footswitch and direction switch): Use external logic level signal to control start, stop and direction. Use the keypad to adjust speed. 4.2.2 B. Running State It shows current drive running state.

• Page 10: Parameter Settings

  BT/S Variable-Speed Peristaltic Pump START/STOP key will work. On the main screen, press and hold the DIRECTION key to lock the keypad; press and hold the START/STOP key to unlock the keypad. Keypad unlocked Keypad locked Figure 7. Keypad Lock 4.2.6 F.

• Page 11
  LEAD FLUID TECHNOLOGY CO.,LTD. Int, Ext, Lev1, Lev2 Time Dispense Mode Disp 32.5rpm 32.5rpm 1.Time Unit: 5.Reverse Angle: Second 2.Disp Time: 6.Max Speed: 5.1Second 600rpm 3.Pause Time: 7.Pump No: 2.0Second 4.Cycles: 8.Beep Setting: Enable 5.Reverse Angle: 9.Language: ENGLISH 10.Contrast: Figure 9. Parameter Setting Flow Chart Mail：master@leadfluid.com…
• Page 12
  BT/S Variable-Speed Peristaltic Pump Note 1. Time Unit: Time unit for dispense mode. The time can be in hours, minutes or seconds. Note 2. DispTime: Dispense time for Time Dispense mode. It is the dispense duration each dose. range 0.1-999 seconds/minutes/hours.

• Page 13: External Control Interface

  LEAD FLUID TECHNOLOGY CO.,LTD. 6 External Control Interface DB15 Mark Note ADC_W Positive of external analog input Communication interface, B pole of RS485 Communication interface, A pole of RS485 VCC_W External DC power input CW_W External input signal to control direction…

• Page 14: Power Connection

  BT/S Variable-Speed Peristaltic Pump manufacturer or distributor. 2) Read through the instruction. 3) There should be more than 200 mm space for the back of the pump when it is running. 7.2 Power Connection The voltage of the power supply should be marked on the sticker of the pump.

• Page 15: Internal Control Mode

  LEAD FLUID TECHNOLOGY CO.,LTD. 7.4 Internal Control Mode Use the keypad to operate pump. Use optional external pulse signal to control start and stop. 1) Turn on the power switch. Pump will display the main screen. 2) Press MODE key to change the mode to Internal Control mode (Int shown on the screen).

• Page 16: External Control Mode

  BT/S Variable-Speed Peristaltic Pump RS_W VCC_W 12VDC Figure 13. Control Start/Stop with External 12V Power Source The RS_W would act like a momentary switch. When the switch is pushed then released, pump will start or stop. 7.5 External Control Mode On this mode, use external logic level signal to control direction, start and stop;…

• Page 17
  LEAD FLUID TECHNOLOGY CO.,LTD. ExtV ExtI 0.0rpm 0.0rpm For External Voltage Signal For External Current Signal 0-5V/0-10V 4-20mA Figure 15. External Control Mode To control pump by external signal: 1) Switch the power off. Wire the DB15 connector as shown on Figure 16or Figure 17.
• Page 18
  BT/S Variable-Speed Peristaltic Pump CW_W ADC_W AGND RS_W 0-5V/0-10V /4-20mA Figure 17. DB15 Wiring with Internal 12VDC Power Source 1) Turn on the power switch. Pump will display the main screen. 2) Press MODE key to change the mode to External Control mode (Ext V or Ext I shown on the screen).

• Page 19: Time Dispense Mode

  LEAD FLUID TECHNOLOGY CO.,LTD. CW_W 1.5K ADC_W AGND RS_W 1.5K VCC_W 0-5V/0-10V /4-20mA 24VDC Figure 18. DB15 Wiring with External 24VDC Power Source 7.6 Time Dispense Mode Pump will dispense fluid automatically by setting duration for each dose, pause time between doses and number of cycles. When dispensing, the display will show the dispensing time or lag time that has passed (1.2s on…

• Page 20: Logic Level 1 Control Mode (Footswitch)

  BT/S Variable-Speed Peristaltic Pump 4) Set duration for each dose, pause time between doses and number of cycles. 5) Return to main screen. Figure 20.Dispense Cycle Setting To run Time Dispense: 1) Press DIRECTION key to change the running direction, clockwise or counterclockwise.

• Page 21
  LEAD FLUID TECHNOLOGY CO.,LTD. 1) Switch the power off. Wire the DB15 connector as shown on Figure 22 or Figure 23, and connect it to the DB15 port on the rear of the pump. RS_W Figure 22. Logic Level 1 Control with Internal 12V Power Source…

• Page 22: Logic Level 2 Control Mode (Footswitch And Direction Switch)

  BT/S Variable-Speed Peristaltic Pump 7.8 Logic Level 2 Control Mode (footswitch and direction switch) Use external logic level signal to control start, stop and direction. Use the keypad to control speed. lev2 32.5rpm Figure 24. Logic Level 2 Control Mode Switch the power off.

• Page 23: Communication Mode

  LEAD FLUID TECHNOLOGY CO.,LTD. CW_W RS_W VCC_W 12VDC Figure 26. Logic Level 2 Control with External 12V Power Source 1) Turn on the power switch. Pump will display the main screen. 2) Press MODE key to change the mode to Logic Level 2 control mode (shows lev2 on the screen).

• Page 24: Speed Setting

  BT/S Variable-Speed Peristaltic Pump 32.5rpm 32.5rpm Communication Disconnected Communication Connected Pump number is set to 1. Figure 27. Communication Mode 1) When the power is off, wire the DB15 connector as shown on Figure 28, and connect it to the DB15 port on the rear of the pump. External DC power source is recommend to avoid electrical interference.

• Page 25: Maintenance

  LEAD FLUID TECHNOLOGY CO.,LTD. between 0.1 and 100 rpm; the speed resolution is 1 rpm when the speed is between 100 and 600 rpm. The speed can be set by pressing the UP or DOWN key. Press the UP or DOWN key shortly, the last digit of the value will change 1.

• Page 26
  BT/S Variable-Speed Peristaltic Pump 2. Check the wire connection between the motor and the driver board. 3. Check the wire connection between the driver and the main board. 4. Check the power voltage for the pump. Hardware Motor is 1. Check the wire connection between trembling the motor and the driver board.
• Page 27
  LEAD FLUID TECHNOLOGY CO.,LTD. not work Software RS485 does 1. Check if the display shows the not work communication is ready. right 2. Reset the address of the pump. 3. Check whether on the bus there are two pumps using the same address If the problem cannot be solved, please contact the manufacturer or distributor.

• Page 28: Dimensions

  BT/S Variable-Speed Peristaltic Pump 9 Dimensions Figure 29. Dimensions(mm) 10 Naming Rule Drive Type Flow Rate Rotation Speed Version Pump type Function Code IP rating B: Step motor Q: Microflow 05: 50 rpm D: Fixed speed 1-9 for special Default: T: Laboratory 08: 80 rpm S: Variable speed…

• Page 29
  Relative humidity <80% IP grade IP31 Display 132×32 LCD Dimensions (LxWxH) 226 x 150 x 238 mm (8.90 x 5.91 x 9.37 inch) Weight BT100S: 4.7 kg (10.4 lbs) BT300S: 4.9 kg (10.8 lbs) BT600S: 5.2 kg(11.5 lbs) Mail：master@leadfluid.com WEB：www.leadfluid.com…
• Page 30
  BT/S Variable-Speed Peristaltic Pump BT100S Suitable Pump Heads and Tubing, Flow Parameters Flow rate Drive Pump Tubing size (mm) type head channel(mL /min) DG6-1 Wall:0.8~1, ID:≤2.4 0.00016~26 (6rollers) DG10-1 Wall:0.8~1, ID:≤2.4 0.00011~20 (10rollers) DG6-2 Wall:0.8~1, ID:≤2.4 0.00016~26 (6rollers) DG10-2 Wall:0.8~1, ID:≤2.4 0.00011~20 (10rollers) DG6-4…
• Page 31
  13# 14# 16# 19# 25# 17# 18# 0.006~1300 YT25 15# 24# 35# 36# 0.16~1600 2 x YT15 13# 14# 16# 19# 25# 17# 18# 0.006~1300 BT600S Suitable Pump Heads and Tubing, Flow Parameters Flow rate Drive Pump Tubing size type head channel(mL/…