Nilfisk attix 50 21 xc инструкция

Operating instructions

ATTIX 30 / PC / XC

ATTIX 40 / PC / XC

ATTIX 50 / PC / XC

ATTIX 50-21 PC EC

107400397 E

ATTIX 30-40-50

6

5

4

9

8

7

ATTIX 40

ATTIX 30

1

2

3

ATTIX 50

ATTIX 30-40-50

Contents

instructions

2 Description

3 Before starting the cleaner

………………………………………………………………………………..2

4 Control / Operation

3.1 Assembling the vacuum cleaner…………………………………….8

3.1.1 Taking accessories out of the packaging

1)

………………………8

3.1.2 Attaching the suction pipe holder to the suction pipe

1)

……..8

3.2 Inserting the filter bag ………………………………………………….9

4.1.1 Connecting the suction hose ……………………………………….11

4.1.2 Electrical connection ………………………………………………….11

4.2 Switching on the vacuum cleaner …………………………………11

4.2.1 Switch „ 0-I “

1)

…………………………………………………………..11

4.2.2 Switch „ auto-0-I “

1)

……………………………………………………11

4.2.3 Suction power control

1)

………………………………………………12

4.2.4 Auto-On/Off-Operation — «auto» switch position

1)

……………12

4.3 Cleaning the filter element ………………………………………….13

4.3.1 Cleaning the filter element » Push&Clean System »

(ATTIX 30- / 40- / 50-xx PC) ………………………………………..13

4.3.2 Cleaning the filter element » XtremeClean »

(ATTIX 30- / 40- / 50-xx XC) ………………………………………..13

methods

6 After using the cleaner

7 Maintenance

5.1.1 Picking up dry substances…………………………………………..14

5.1.2 Picking up liquids ……………………………………………………….14

6.1 Switching the vacuum cleaner off and storage ……………….15

8 Troubleshooting

7.2.1 Emptying the dirt tank ………………………………………………..16

7.2.2 Replacing the filter bag ……………………………………………….17

7.2.3 Replacing the disposal bag ………………………………………..18

7.2.4 Replacing filter element (Push & Clean System) ……………19

7.2.5 Replacing filter element (XtremeClean System) …………….20

………………………………………………………………………………21

9.1 Recycling the cleaner …………………………………………………22

9.3 Tests and approvals……………………………………………………22

9.4 EC declaration of conformity ……………………………………….22

1)

Optional accessories / Option depending on model

Original Instruction

1

ATTIX 30-40-50

1 Important safety instructions

Symbols used to mark instructions

Prior to using the appliance for the first time, be sure to read this document through and keep it ready to hand.

DANGER

Danger that leads directly to serious or irreversible injuries, or even death.

WARNING

Danger that can lead to serious injuries or even death.

CAUTION

Danger that can lead to minor injuries and damage.

The appliance must

• only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating it

• only be operated under supervision

• This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

• Children shall be supervised to make sure that they do not play with the appliance.

1. Do not use any unsafe work techniques.

2. Never use the vacuum cleaner without a filter.

3. Switch off the appliance and disconnect the mains plug in the following situations:

— Prior to cleaning and servicing

— Prior to replacing components

— Prior to changing over the appliance

— If foam develops or liquid emerges

Besides the operating instructions and the binding accident prevention regulations valid in the country of use, observe recognised regulations for safety and proper use.

Purpose and intended use

The appliance is suitable for picking up dry, non-flammable dust and liquids.

The appliance is suitable for commercial use, such as e.g. in

• Hotels, Schools, Hospitals, Factories, Shops, Offices, Hire shops

Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user.

Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.

2 1) Optional accessories / Option depending on model

Original Instruction

Transport

Storage

Electrical connection

Extension lead

Warranty

Tests and approvals

ATTIX 30-40-50

1. Before transporting the dirt tank, close all the locks.

2. Do not tilt the cleaner if there is liquid in the dirt tank.

3. Do not use a crane hook to lift the cleaner.

1. Store the appliance in a dry place, protected from frost.

1. It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker.

2. Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained.

3. Connectors and couplings of power supply cords and extension leads must be watertight.

1. As an extension lead, only use the version specified by the manufacturer or one of a higher quality.

2. When using an extension lead, check the minimum cross-sections of the cable:

Cable length

up to 20 m

20 to 50 m

< 16 A

1.5 mm

2

2.5 mm

2

Cross section

< 25 A

2.5 mm

2

4.0 mm

2

Our general conditions of business are applicable with regard to the guarantee.

Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.

Electrical tests must be per formed in accordance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701 Part 1 and Part

3. In ac cord ance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.

1)

Optional accessories / Option depending on model

Original Instruction

3

ATTIX 30-40-50

Risks

Electrical components

DANGER

Electric shock due to faulty mains connecting lead.

Touching a faulty mains connecting lead can result in serious or even fatal injuries.

1. Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).

2. Regularly check whether the power cord is damaged or shows signs of ageing.

3. Have the faulty mains connecting lead replaced by your

Nilfisk-Alto service representative or a qualified electrician prior to using the appliance again.

DANGER

The upper section of the vacuum cleaner contains live components.

Contact with live components leads to serious or even fatal injuries.

1. Never spray water on to the upper section of the vacuum cleaner.

CAUTION

Appliance socket *) .

The appliance socket is only designed for the purposes defined in the operating instructions. The connection of different appliances can result in damage.

1. Prior to plugging in an appliance, always switch off the vacuum cleaner and the appliance that is to be connected.

2. Read the operating instructions to the appliance to be connected and observe the safety notes contained in these.

CAUTION

Damage due to unsuitable mains voltage.

The appliance can be damaged as a result of being connected to an unsuitable mains voltage.

1. Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.

4 1) Optional accessories / Option depending on model

Original Instruction

Picking up liquids

Hazardous materials

Spare parts and accessories

Emptying dirt tank

ATTIX 30-40-50

CAUTION

Picking up liquids.

Do not pick up flammable liquids.

1. Before liquids are picked up, always remove the filter bag/ waste bag and check that the float 1) or the water level limit 1) works properly.

2. The use of a separate filter element or filter screen is recommended.

3. If foam appears, stop work immediately and empty the tank.

WARNING

Hazardous materials.

Vacuuming up hazardous materials can lead to serious or even fatal injuries

1. The following materials must not be picked up by the vacuum cleaner:

— hazardous dust

— hot materials (burning cigarettes, hot ash, etc.)

— flammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.)

— flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)

CAUTION

Spare parts and accessories.

The use of non-genuine spare parts and accessories can impair the safety of the appliance.

1. Only use spare parts and accessories from Nilfisk-Alto.

2. Use only the brushes supplied with the vacuum cleaner or specified in the operating manual.

CAUTION

Picking up environmentally hazardous materials.

Materials picked up can present a hazard to the environment.

1. Dispose of the dirt in accordance with legal regulations.

1)

Optional accessories / Option depending on model

Original Instruction

5

ATTIX 30-40-50

2 Description

6

5

4

9

8

7

1 Handle with receptacle for electrical lead

2 Fixing point for suction pipe holder

3 Retaining clamp

4 Castor

5 Dirt tank

6 Inlet fitting

7 Applicance switch

8 Appliance socket

1)

9 Operating knob for filter cleaning

1)

ATTIX 30

1

2

3

ATTIX 40

ATTIX 50

6 1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

1)

Optional accessories / Option depending on model

Original Instruction

ATTIX 30- / 40- / 50-01

ATTIX 30- / 40- / 50-11

auto

ATTIX 30- / 40- / 50-21

7

ATTIX 30-40-50

3 Before starting the cleaner

vacuum cleaner

3.1.1 Taking accessories out of the packaging

1)

A

3.1.2 Attaching the suction pipe holder to the suction pipe

1)

1.

2.

A

1. Take vacuum cleaner and accessories out of the packaging.

2. The mains plug should not yet be inserted into a socket.

4. Open the retaining clamps

(A) and remove the upper section of the vacuum cleaner.

5. Take the accessories

1)

out of the dirt tank and the packaging.

1. Attach the suction pipe holder to the suction pipe.

3.

8 1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

3.2 Inserting the filter bag

A

A

1. The mains plug should not yet be inserted into a socket.

2. Open the retaining clamps

(A) and remove the upper sec-tion of the vacuum cleaner.

3. Insert the filter bag into the dirt tank.

1)

Optional accessories / Option depending on model

Original Instruction

9

ATTIX 30-40-50

4. Press the filter bag connection firmly on to the inlet fitting.

A A

5. Attach the upper section of the vacuum cleaner.

6. Close the retaining clamps

(A ). Ensure that the retaining clamps fit properly.

10 1) Optional accessories / Option depending on model

Original Instruction

4 Control / Operation

4.1 Connections

4.1.1 Connecting the suction hose

1. Connect the suction hose.

ATTIX 30-40-50

4.1.2 Electrical connection

The operating voltage shown on the rating plate must corres pond to the voltage of the mains power supply.

4.2 Switching on the vacuum cleaner

4.2.1 Switch „ 0-I “

1)

4.2.2 Switch „ auto-0-I “

1)

auto

1)

Optional accessories / Option depending on model

Original Instruction

1. Ensure that the cleaner is switched off.

2. Insert the power cord into a properly installed and fused socket with earthing contact.

Switch position

0

I

Function

Off

On

Switch position

0 auto

I

Function

Off

Auto On/Off

On / manual mode

11

ATTIX 30-40-50

4.2.3 Suction power control

1)

auto

4.2.4 Auto-On/Off-Operation

— «auto» switch position

1)

The vacuum cleaner is switched on and off by the power tool connected.

Dirt is picked up from the source of dust immediately.

To comply with regulations, only approved dust producing tools should be connected.

The maximum power consumption of the connected electrical appliance is stated in section «Technical data».

Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off.

auto

Switch position

Function

The suction power control switch allows precise adaptation of the suction power for different cleaning tasks.

1. Switch off the vacuum cleaner.

2. Switch off the power tool.

3. Connect the power tool and the vacuum cleaner with a suction hose.

4. Insert the plug of the power tool into the tool socket on the operating panel of the vacuum cleaner.

5. Switch on the vacuum cleaner. Switch in «auto» position.

6. Switch on the power tool. The vacuum cleaner motor starts when the connected power tool is switched on.

When the power tool is switched off, the vacuum cleaner continues to run for a short moment so that any dust in the suction hose is conveyed to the filter bag.

12 1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

4.3 Cleaning the filter element

4.3.1 Cleaning the filter element

» Push&Clean System »

(ATTIX 30- / 40- / 50-xx PC)

Only for vacuum cleaning without a filter bag and without a cloth insert filter.

Filter Cleaning System

4.3.2 Cleaning the filter element » XtremeClean »

(ATTIX 30- / 40- / 50-xx XC)

Only for vacuum cleaning without a cloth insert filter.

If suction performance drops:

1. Turn switch to position «I» (maximum suction power).

2. Close the nozzles or suction hose opening with the palm of your hand.

3. Press the button to start filter cleaning three times. The resulting stream of air removes attached dust from the slats of the filter elements.

10 sec.

To ensure that suction performance is always at its best, the filter element is automatically cleaned during operation. We recommend complete cleaning if the filter element becomes extremely dirty.

1. Switch off the vacuum cleaner

2. Close the nozzles or suction hose opening with the palm of your hand.

3. Turn the switch to position „I“ and let the cleaner operate for approx. 10 seconds with the suction hose opening closed.

1)

Optional accessories / Option depending on model

Original Instruction

13

ATTIX 30-40-50

5 Applications and techniques

5.1 Techniques

If used correctly, additional accessories, suction nozzles and suction hoses can enhance the cleaning action and reduce the cleaning effort.

Effective cleaning is achieved if you follow just a few guidelines in combination with your own practical experience in special fields.

Here are some basic tips.

5.1.1 Picking up dry substances

Before picking up dry substances, always ensure that a filter bag is inserted in the tank (see section «Accessories» for order number).

Disposal of the picked up material is then simple and hygienic.

After picking up liquids, the filter element is wet. A damp filter element clogs more quickly when dry substances are picked up. For this reason the filter element should be washed and dried or replaced by a dry element before dry substances are picked up.

5.1.2 Picking up liquids

Before liquids are picked up, always remove the filter bag/disposal bag.

The use of a separate filter element or filter screen is recommended.

Does not apply to XC machines.

If foam appears, stop work immediately and empty the tank.

To reduce the amount of foam, use foam killer Nilfisk-Alto Foam Stop

(see section «Accessories» for order number).

14 1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

6 After finishing work

6.1 Switching the vacuum cleaner off and storage

A

C

B

1. Switch off the cleaner and pull the mains plug out of the socket.

2. Wind up the power cord onto the handle (A). Begin winding up the cord at the cleaner end and not the plug end to prevent the power cord from tangling up.

3. Empty the dirt tank and clean the vacuum cleaner.

4. After picking up liquids: Store the upper section of the vacuum cleaner separately so that the filter element can dry.

5. Hang the suction hose with the floor nozzle (B) in the brackets and pack the accessories (C) away.

6. Store the cleaner in a dry room where it is protected from unauthorized use.

1)

Optional accessories / Option depending on model

Original Instruction

15

ATTIX 30-40-50

7 Maintenance

7.2.1

Emptying dirt tank

7.2.2

Replacing the filter bag

7.2.3

Replacing the disposal bag

7.2.4

Replacing filter element (Push&Clean)

7.2.5

Replacing filter element (XtremeClean)

After finishing work



When required









7.2.1 Emptying the dirt tank

After emptying the tank: clean the rim of the tank and the seals in the intermediate ring and the upper section of cleaner before refitting them.

If the seal or groove is dirty or damaged, the suction performance will be reduced.

Before reinserting the suction hose: clean the inlet fitting and hose collar.

A A

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2. Open the retaining clamps (A) and remove the upper section of the vacuum cleaner.

3. Tip out the collected dirt.

4. Dispose of the dirt in accordance with legal regulations.

16

A A

5. Attach the upper section of the vacuum cleaner.

6. Close the retaining clamps

(B). Ensure that the retaining clamps fit properly.

1) Optional accessories / Option depending on model

Original Instruction

7.2.2 Replacing the filter bag

A

A

A

ATTIX 30-40-50

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2. Open the retaining clamps

(A) and remove the upper section of the vacuum cleaner.

B D

C

Removing the filter bag:

3. Carefully remove the filter bag connection from the inlet fitting (C).

4. Close the filter bag connection (D) with the slider.

5. Dispose of the filter bag in accordance with legal regulations.

Inserting the filter bag:

6. Clean the dirt tank.

7. Insert the filter bag in the dirt tank.

new filter bag firmly on to the inlet fitting (C).

A

9. Attach the upper section of the vacuum cleaner.

(B). Ensure that the retaining clamps fit properly.

1)

Optional accessories / Option depending on model

Original Instruction

17

ATTIX 30-40-50

7.2.3 Replacing the disposal bag

A A

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2. Open the retaining clamps

(A) and remove the upper section of the vacuum cleaner.

C

B

D

E

Removing the disposal bag:

3. Close the disposal bag with string (B).

4. Carefully remove the filter bag connection from the inlet fitting (C).

5. Close the disposal bag connection (D) with the slider.

6. Dispose of the disposal bag in accordance with legal regulations.

Inserting the disposal bag:

7. Clean the dirt tank.

8. Insert the disposal bag into the dirt tank.

9. Check that the ventilation holes (E) remain inside the dirt tank.

10. Press the bush of the new filter bag firmly on to the inlet fitting.

11. Fold the top edge of the disposal bag over the rim of the dirt tank.

A

A

12. Attach the upper section of the vacuum cleaner.

(A). Ensure that the retaining clamps fit properly.

18 1) Optional accessories / Option depending on model

Original Instruction

7.2.4 Replacing filter element

(Push & Clean System)

Never use the vacuum clean er without a filter.

A

A

B

A

ATTIX 30-40-50

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2. Open the retaining clamps

(A) and remove the upper section of the vacuum cleaner.

Removing the filter element:

3. Turn the filter holder anticlockwise and remove it .

4. Carefully remove the filter element.

5. Clean the filter seal (B).

Check it for damage and replace it if necessary.

Inserting the filter element:

6. Fit the filter holder and turn it clockwise to secure it.

7. Fit the filter holder and turn it clockwise to secure it.

ter element in accordance with legal regulations.

A

9. Attach the upper section of the vacuum cleaner.

(A). Ensure that the retaining clamps fit properly.

1)

Optional accessories / Option depending on model

Original Instruction

19

ATTIX 30-40-50

7.2.5 Replacing filter element

(XtremeClean System)

Never use the vacuum clean er without a filter.

A

B

B

C

D

B

A

1. Switch off the vacuum cleaner and pull the mains plug out of the socket.

2. Open the retaining clamps

(A) and remove the upper section of the vacuum cleaner.

Removing the filter elements:

3. Open fi lter tension part (B).

4. Remove carefully the cassettes with fi lter elements.

Inserting the filter elements:

5. Insert new fi lter elements (C) into the cassettes (D).

6. Attach the cassettes with the fi lter elements onto the upper section of the vacuum cleaner.

7. Fix the fi lter tension part (B).

ter elements in accordance with legal regulations.

A A

9. Attach the upper section of the vacuum cleaner.

(A). Ensure that the retaining clamps fit properly.

20 1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

8 Troubleshooting

Fault

‡ Motor does not start

‡

‡

Motor does not run in automatic mode

1)

Reduced suction power

‡

‡

No suction power during wet cleaning

Voltage fluctuations

Cause

> Fuse of the mains socket has blown.

> Overload protection switch has tripped.

> Motor is faulty.

> Power tool/pneumatic tool is defective or not connected properly.

> The power rating of the electrical tool is too low.

•

•

•

Remedy

Connect mains fuse.

• Switch off the vacuum cleaner and allow it to cool for approx.

5 minutes. If the cleaner cannot be started again, contact the Nilfisk-Alto service department.

• Have motor changed by

Nilfisk-Alto Service.

Check that the power tool works or that the plug is inserted correctly.

Note that minimum power rating is P>40W

> Suction power selected with suction power control

1)

is too low.

• Set suction power in accordance with section

„Setting suction power“.

> Clogged suction hose/nozzle.

• Clean suction hose/nozzle

> Tank, disposal bag or filter bag is full.

• See «Emptying tank» or

«Replacing disposal bag, filter bag» sections.

> Filter element is clogged.

• See section „Cleaning filter element“ and „Replacing filter element“.

• Replace seal.

> Seal between tank and upper section of vacuum cleaner is faulty or missing.

> Cleaning mechanism is defective.

• Contact Nilfisk-Alto Service.

> Tank is full. • Switch off the cleaner. Empty the tank.

> Impedance of power supply is too high.

• Connect the cleaner to another socket closer to the fuse box.

Voltage fluctuations over

7% should not occur if the impedance at the transfer point is

0.15 .

1)

Optional accessories / Option depending on model

Original Instruction

21

ATTIX 30-40-50

9 Further information

9.1 Recycling the cleaner

9.2 Guarantee

Make the old cleaner unusable immediately.

1. Unplug the cleaner.

2. Cut the power cord.

3. Do not discard of electrical appliances with household waste.

As specified in European Directive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information.

Our general conditions of business are applicable with regard to the guarantee.

Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.

9.3 Tests and approvals

Electrical tests must be performed in accordance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701 Part 1 and Part

3. In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.

The vacuum cleaner has been approved in accordance with IEC/EN

60335-2-69.

9.4 EC declaration of conformity

22

EU Declaration of Conformity

Product:

Type:

The design of the unit corre sponds to the following pertinent regulations:

Applied harmonised standards:

Applied national standards and technical specifications:

Vacuum cleaner for wet and dry operation

ATTIX 30 / 40 / 50

EC Machine Directive 2006/42/EC.

EC EMC Directive 2004/108/EC

EC — RoHS Directive 2011/65/EC

EN 60335-1: 2012

EN 60335-2-69: 2009

EN 55014-1: 2006+A1: 2009+A2: 2011

EN 55014-2: 1997+A1: 2001+A2: 2008

EN 61000-3-2: 2006+A1: 2009+A2: 2009

EN 61000-3-3: 2008

DIN EN 60335-2-69:2010

Name and address of the person autho rised to compile the technical fi le:

Anton Sørensen

General Manager, Technical Operations EAPC

Nilfisk-Advance A/S

Sognevej 25

DK-2605 Brøndby

Identity and signature of the person empowered to draw up the declaration on behalf of the manufacturer:

Anton Sørensen

General Manager, Technical Operations EAPC

Place and date of the declaration:

Nilfisk-Advance A/S

Sognevej 25

DK-2605 Brøndby

Hadsund, 04-04-2013

1) Optional accessories / Option depending on model

Original Instruction

ATTIX 30-40-50

Voltage

Mains frequency

Fuse

Power consumption

IEC

V

Hz

A

W

EU

16

CH / DK

230

10

ATTIX 30 / 40 / 50

GB 230

50 / 60

13

GB 110V

110

16

1200 1000

US

120

60

15

FR

230

16

AU/NZ

230 / 240

50

16

1200

ZA

230

13

50-21 PC EC

EU

230

50/60

16

1100

ATTIX

30-01

30-01 PC

40-01 PC 50-01 PC

30-11 PC

30-21 PC

30-21 XC

40-21 PC

40-21 XC

50-21 PC

51-21 XC

50-21

PC EC

Connected load for appliance socket

Total connected load

W

W

—

1200

1000 (GB 110, US)

2400

1750 (GB 110)

600 (US)

3600

2750 (GB 110)

1440 (US)

2400

3500

Air flow rate

(max.)

Vacuum m3/h l/min mbar/ hPA kPa dB(A)

+/-2

222/3700

192/3200 (GB 110, US)

250 / 25

230 / 23 (GB 110, US)

261

3600

230 /

23

Sound pressure

IEC 704

62

Sound level dB(A)

+/-2

59

Vibration

ISO 5349

Power cord: Length m/s² ≤ 2,5

Power cord: Type

1. (EU, AU)

2. (GB 110V)

3. (ZA, GB

230V)

4. (CH)

6. (US)

3. (EU, GB

230V)

4. (CH)

2. (GB 110V)

3. (EU, DK, ZA,

GB 230V)

4. (CH)

6. (US)

II

7,5

3. (EU, GB

230V, DK,

AU)

5. (GB 110V)

4. (CH)

6. (US)

3. (EU, AU)

4. (CH)

3. (EU, GB 230V,

DK, AU)

5. (GB 110V)

6. (US)

Protection class

Type of protection

(splash water protected)

Radio interference level

Tank volume

Width

Depth l mm mm

30

360

37

440

47

360

IPX4

EN 55014-1

30

360

450

37

440

I

47

360

Height

Weight mm kg

600

10

740

13

750

11

600

10 (PC)

11 (XC)

740

12 (PC)

14 (XC)

11 (PC)

12 (XC)

1) H05RR-F 2×0.75 2) H05BQ-F 2×1.0 3)H05RR-F 3G1,5 4) H05RR-F 3G1,0 5) H07BQ-F 3G2,5 6) SJTW-A AWG 16/3

750

3. (EU)

11

Description

Fleece filter bag Attix 30 (5 pcs.)

Fleece filter bag Attix 40, 50 (5 pcs.)

Disposal bag Attix 30, 40, 50 (5 pcs.)

Zylindrical filter element PC

Flat filter element XC (2 Stück)

Cloth insert filter Attix 30

Cloth insert filter Attix 50

Nilfisk-Alto-Foam-Stop (6x1l)

1)

Optional accessories / Option depending on model

Original Instruction

Order No.

302004000

302004004

302000728

302000461

302002842

302000525

302000606

8469

23

HEAD QUARTER

DENMARK

Nilfi sk-Advance A/S

Sognevej 25

DK-2605 Brøndby

Tel.: (+45) 4323 8100 www.nilfi sk-advance.com

SALES COMPANIES

ARGENTINA

Nilfi sk-Advance srl.

Herrera 1855, 6 fl oor, Of. A-604

ZC 1293 – Ciudad Autónoma de Buenos Aires – Argentina www.nilfi sk-alto.com

AUSTRALIA

Nilfi sk-ALTO

Unit 1, 13 Bessemer Street Blacktown

NSW 2148 Australia www.nilfi sk-alto.com.au

AUSTRIA

Nilfi sk-ALTO

Geschäftsbereich der Nilfi sk-Advance GmbH

Metzgerstraße 68

A-5101 Bergheim/Salzburg www.nilfi sk-alto.at

BELGIUM

Nilfi sk-Advance NV/SA

Riverside Business Park

Boulevard Internationalelaan 55

Bâtiment C3/C4 Gebouw

Bruxelles 1070 Brussel www.nilfi sk.be

CHILE

Nilfi sk-Advance S.A.

San Alfonso 1462, Santiago www.nilfi sk.com

CHINA

Nilfi sk-Advance Cleaning Equipment

(Shanghai) Co Ltd.

No. 4189, Yindu Road

Xinzhuang Industrial Park

Shanghai 201108 www.nilfi sk.cn

CZECH REPUBLIC

Nilfi sk-Advance s.r.o.

Do Certous 1

VGP Park Horní Pocernice, Budova H2

CZ-190 00 Praha 9 www.nilfi sk.cz

DENMARK

Nilfi sk-ALTO Danmark

Industrivej 1

Hadsund, DK-9560 www.nilfi sk-alto.dk

FINLAND

Nilfi sk-Advance OY Ab

Koskelontie 23E

Espoo, FI-02920 www.nilfi sk.fi

FRANCE

Nilfi sk-Advance SAS

Division ALTO

BP 246

91944 Courtaboeuf Cedex www.alto-fr.com

GERMANY

Nilfi sk-ALTO

Geschäftsbereich der Nilfi sk-Advance AG

Guido-Oberdorfer-Straße 10

89287 Bellenberg www.nilfi sk-alto.de

GREECE

Nilfi sk-Advance A.E.

8, Thoukididou Str.

Argiroupoli,Athens, GR-164 52 www.nilfi sk.gr

HOLLAND

Nilfi sk-Advance B.V.

Versterkerstraat 5

1322 AN ALMERE www.nilfi sk.nl

HONG KONG

Nilfi sk-Advance Ltd.

2001 HK Worsted Mills Ind’l Bldg.

31-39 Wo Tong Tsui St.

Hong Kong, Kwai Chung, N.T.

www.nilfi sk.com

HUNGARY

Nilfi sk-Advance Kereskedelmi Kft.

H-2310 Szigetszentmiklós-Lakihegy

II. Rákóczi Ferenc út 10.

www.nilfi sk.hu

INDIA

Nilfi sk-Advance India Limited

Pramukh Plaza, ‘B’ Wing, 4th fl oor, Unit No. 403

Cardinal Gracious Road, Chakala

Andheri (East), Mumbai 400 099 www.nilfi sk.com

IRELAND

Nilfi sk-Advance

1 Stokes Place

St. Stephen’s Green

Dublin 2, Ireland www.nilfi sk-alto.ie

ITALY

Nilfi sk-Advance S.p.A.

Strada Comunale Della Braglia, 18

Guardamiglio, Lombardia, I-26862 www.nilfi sk.it

JAPAN

Nilfi sk-Advance Inc.

1-6-6 Kita-Shinyokohama

Kouhoku-Ku

Yokohama 223-0059 www.nilfi sk-advance.co.jp

KOREA

NIlfi sk-Advance Korea

471-4, Kumwon B/D 2F,

Gunja-Dong, Gwangjin-Gu, Seoul www.nilfi sk-advance.kr

MALAYSIA

Nilfi sk-Advance Sdn Bhd

SD 33, Jalan KIP 10

Taman Perindustrian KIP

Sri Damansara

52200 Kuala Lumpur

Malaysia www.nilfi sk.com

MEXICO

Nilfi sk Advance de Mexico S. de R.L. de C.V.

Agustin M. Chavez 1, PB-004

Col. Centro Ciudad Santa Fe

C.P. 01210 México, D.F.

www.nilfi sk-advance.com.mx

NEW ZEALAND

Nilfi sk-Advance NZ Ltd

Danish House

6 Rockridge Avenue

Penrose Auckland NZ 1135 www.nilfi sk.com.au

NORWAY

Nilfi sk-Advance AS

Bjørnerudvejen 24

Oslo, N-1266 www.nilfi sk-alto.no

PERU

Nilfi sk-Advance S.A.C.

Calle Boulevard 162, Of. 703, Lima 33- Perú

Lima www.nilfi sk.com

POLAND

Nilfi sk-Advance Sp. z.o.o ul. 3-go Maja 8, Bud. B4

Pruszków, PL-05-800 www.nilfi sk-alto.pl

PORTUGAL

Nilfi sk-Advance, Lda.

Sintra Business Park

Zona Industrial Da Abrunheira

Edifi cio 1, 1o A

Sintra, P-2710-089 www.nilfi sk.pt

RUSSIA

Nilfi sk-Advance LLC

Vyatskaya str. 27, bld. 7, 1st fl oor

Moscow, 127015 www.nilfi sk.ru

SOUTH AFRICA

WAP South Africa (Pty) Ltd

12 Newton Street

1620 Spartan, Kempton Park www.wap.co.za

SINGAPORE

Den-Sin

22 Tuas Avenue 2

Singapore www.nilfi sk.com

SPAIN

Nilfi sk-Advance, S.A.

Torre D’Ara

Passeig del Rengle, 5 Plta.10ª

Mataró, E-0830222 www.nilfi sk.es

SWEDEN

Nilfi sk-Advance AB

Taljegårdsgatan 4

431 53 Mölndal

Website: www.nilfi sk-alto.se

SWITZERLAND

NA Sondergger AG

Nilfi sk-ALTO Generalvertretung

Mühlestrasse 10

CH-9100 Herisau www.nilfi sk-alto.ch

TAIWAN

Nilfi sk-Advance Ltd.

Taiwan Branch (H.K.)

No. 5, Wan Fang Road, Taipei www.nilfi sk-advance.com.tw

THAILAND

Nilfi sk-Advance Co. Ltd.

89 Soi Chokechai-Ruammitr

Viphavadee-Rangsit Road

Jomphol, Jatuchak

Bangkok 10900 www.nilfi sk.com

TURKEY

Nilfi sk-Advance Prof. Tem. Ek. Tic. A.S.

Serifali Mh. Bayraktar Bulv. Sehit Sk. No:7

Ümraniye, Istanbul 34775 www.nilfi sk.com.tr

UNITED KINGDOM

Nilfi sk-ALTO

Bowerbank Way, Gilwilly Industrial Estate

Penrith, Cumbria

GB-CA11 9BQ www.nilfi sk-alto.co.uk

UNITED ARAB EMIRATES

Nilfi sk-Advance Middle East Branch

SAIF-Zone, P. O. Box 122298

Sharjah www.nilfi sk.com

USA

Nilfi sk-Advance

14600 21st Ave. North

Plymouth MN 55447-3408 www.nilfi sk-alto.us

Nilfi sk-Advance, Inc.

Industrial Vacuum Division

740 Hemlock Road, Suite 100

Morgantown, PA 19543 www.nilfi sk-alto.us

VIETNAM

Nilfi sk-Advance Co., Ltd.

No.51 Doc Ngu Str. Lieu Giai Ward

Ba Dinh Dist. Hanoi www.nilfi sk.com

Loading…