Optical fiber tester ff 980rev инструкция на русском

Warning

When using this instrument, please do not look directly at the optical interface or the end of the optical �iber with

your eyes, avoid eye damage!Any change or modi�ication not explicitly permitted in this manual will deprive you of

the right to operate the equipment.To reduce the risk of �ire or electric shock, do not expose the equipment to

thunderstorm or humid environment.In order to prevent electric shock, do not open the shell, it must be repaired by

the quali�ied personnel designated by the manufacturer.

Attention

Battery: The battery in the machine is a special lithium-ion polymer battery. The charging voltage is 5V, and the

charging temperature ranges from 0℃～ 50℃. When the ambient temperature is too high, the charging will

automatically terminate. When the instrument is not used for a long time, the battery should be removed. The

temperature range of the battery during long-term storage is -20℃～ 45℃.

Please use the special AC adapter attached to this instrument and use the external power supply strictly according to

the speci�ications, otherwise the equipment may be damaged.

LCD screen: The display of this series of instruments is 3.5 inch color LCD. In order to maintain good viewing effect,

please keep the LCD screen clean and clean. When cleaning, the LCD screen can be cleaned by wiping with soft

fabric.

VFL

OTDR

4

3

1

Optical Fiber Tester

3

1

2

F1

F2

F3

OK

Zoom key

Zoom function key, combined with

direction keys to operate.

ON/OFF key

Short press to turn on, long press to

turn off; after turning on, short press

to turn on or off the flashlight.

OK key

Enter the next level of interface, Enter function

Turn on and enter the main menu. There are

eight functional modules. Select the module by

pressing the direction keys, and then press the

«OK» key to enter the corresponding functional

interface.

Time

2019-04-26

F1: Enter the parameter setting interface

F2: Switching A/B cursor

F3: Enter the save interface

F4: File or Folder operation

OTDR setting interface

Enter the parameter setting interface. Multi-digit

settings, through the left and right key positioning

cursor, up and down selection.

▲▼: Choosing settings items.

Press OK button to con�irm or edit corresponding

measurement parameters.

9

8

9

8

9

8

F1: Test

F2: OK

F3: Recovery

F4: Cancel

Link quality and information can be viewed

from the top after the test is completed,

Link information includes length, total loss and

number of events.

Detailed event information can be viewed from

the event list.

There are Four types of events:

Reflective event

Non-reflective event

Fiber splitter

Fiber end

Press

to enter zoom mode

X-axis direction zoom in

X-axis direction zoom out

Y-axis direction zoom in

Y-axis direction zoom out

OK

Press

1:1 display

Optical Fiber Tester

F1

F2

F3

F4

OK

OPM

OTDR/LS Port

1

OPM Port

2

2

VFL Port

3

1

Flashlight

4

Right side

2

RJ45

RJ45 Interface

1

2

1

Reset button

2

F4

Main view

3

Dust Cover

1

3.5 inch Color LCD

2

Function Keys

3

1

Functional Keys

Functional keys

Correspond to the operation menu below the screen.

F1

F2

Main Interface

Flashlight

TF

USB

Battery

14:00

Link Information

Waveform

A/B cursor

A/B Information

Test Conditions

Event List

OTDR Setting Interface

7

7

7

OTDR-Zoom mode

Optical Fiber Tester

Brief

Top view

F3

F4

OK

2019-04-26

OPM

dB/dBm/mW

Laser Source

RJ45 Sequence

OTDR

2019-04-26

PASS

Len

A 0.000Km

A-B

Dis

Test

Wave

NO

Type

2-1

2-2

Set

F1

2019-04-26

Wave

Mode

Range

Pulse

Avg. Time

Event Loss Thre.

Return Loss Thre.

End Loss Thre.

Ior

Auto Analyze

Test

F1

Test Results

2019-04-26

PASS

Len

A 0.000Km

A-B

Dis

Test

Wave

NO

Type

2-1

2-2

Set

F1

2019-04-26

PASS

Len

Zoom Mode

A 0.000Km

A-B

Dis

Test

Wave

NO

Type

2-1

2-2

Set

F1

User’s Manual

Left side

Micro USB

1

Charging LED Indicator

2

TF Card Port

3

Bottom view

RJ45 Remote tester

1

Measure key

Press to start or stop the test under

the OTDR interface

Return to the previous menu

Directional keys

Up and down choice, right and left choice

14:00

OTDR

Event MAP

VFL

650nm

OPM

VFL

Length & Tracker

1 2 3 4 5 6 7 8

System

14:00

4.000km

Loss

0.80dB

Event

2

1

2

B 3.057Km

Loss

AV.-L

2.000km

0.40dB

0.18dB/km

1550nm

Range

8km

Pulse

50ns

Dis

Event-L AV.-L

Return-L Link-L

(Km)

(dB)

(dB/Km)

(dB)

(dB)

1.000

0.80

0.18

35.00

0.20

4.000

0.00

0.18

30.00

0.80

Cursor

Save

File

F2

F3

F4

14:00

1550nm

Real

20Km

50ns

5s

0.1dB

40dB

10dB

1.46825

OK

Recover

Cancel

F2

F3

F4

14:00

4.000km

Loss

0.80dB

Event

2

1

2

B 3.057Km

2.000km

Loss

0.40dB

AV.-L

0.18dB/km

1550nm

Range

8km

Pulse

50ns

Dis

Event-L AV.-L

Return-L Link-L

(Km)

(dB)

(dB/Km)

(dB)

(dB)

1.000

0.80

0.18

35.00

0.20

4.000

0.00

0.18

30.00

0.80

Cursor

Save

File

F2

F3

F4

14:00

4.000km

Loss

0.80dB

Event

2

1

2

B 3.057Km

Loss

AV.-L

2.000km

0.40dB

0.18dB/km

1550nm

Range

8km

Pulse

50ns

Dis

Event-L AV.-L

Return-L Link-L

(Km)

(dB)

(dB/Km)

(dB)

(dB)

1.000

0.80

0.18

35.00

0.20

4.000

0.00

0.18

30.00

0.80

Cursor

Save

File

F2

F3

F4

2

3

Exit key

4

5

6

7

8

• Вся активность

Join the conversation

You can post now and register later.

If you have an account, sign in now to post with your account.

mini pro OTDR
Model: FF-980REV
Wavelength: 1310 and 1550nm
Dynamic Range: 24/22dB
Testing Range: 3m to 64km

9 Functions in 1 Device
1) OTDR
2) EVENT MAP
3) Optical Light Source
4) Optical Power Meter
5) Visual Fault Locator
6) RJ45 Ethernet Cable Sequence
7) Ethernet Cable Distance
Ethernet Cable Tracker
9) LED Light

Frequently Asked Questions on OTDR
Model# FF-980REV

Q2: Does the OTDR (FF-980REV) support real time and average time testing mode like other world famous OTDR?
A2: Yes, the OTDR support both read time and average time testing mode. And of course, Auto Mode is also supported.

Q3: Does the test result can be displayed quickly on screen?
A3: Yes, very quickly. If you selected «Auto» testing mode, it takes 5 seconds to display OTDR curves and event list on screen. 

Q4: What connectors do come with the OTDR?
A4: The OTDR comes with FC, SC in default. ST and LC connector are sold separately.

Q5: My fiber cable is with a APC connector, but I have bought an OTDR with UPC connector(port). How can I make the test?
A5: According to industrial standard, APC connector can not work together with UPC connectors. So (1) please find a short fiber patch cord, one end is with APC and the other end is with UPC. (2) Use the UPC to APC adapter. See the picture. (3) buy an OTDR with APC connector(port). Please let our sales know you are going to buy an OTDR with APC connector before you place your order.

Q6: Do I need to add money for extra functions (VFL, OPM, OLS, Ethernet Cable Testing) ?
A6: No. The OTDR comes with all of these functions. 

Q7: Do the OTDR comes with Event Map?
A7: Yes.

Q8: The OTDR can work on short cables, e.g. 3 meters ?
A8: Yes. It is good at short cable testing from 3 meters to 64km. Check the video please. https://youtu.be/Oxy0huN3uBs

Q9: Do you have a video demo?
A9: Yes, watch the video please.

Q10: How to re-calibrate the OTDR, and any fees charged for re-calibration?
A10: The OTDR has been already built-in self-calibration system. If testing calibration needed to be deployed, OTDRs should be sent back China. Customer pays for shipping fees to China while we pay shipping fees to customer. But within warranty time (3 years), customer does not need to pay any fees. And no other fees will be charged for calibration or repair work.

Q11: What is your warranty time and repair policy?
A11: If software problems, we can send you a firmware for system upgrade by email. If a hardware problem, our engineers can cooperate with you to find which part is broken in OTDR via email or skype video. And we send you the hardware parts, and teach you how to repair. But if it is not easy to repair from your side, you must return back for repair.
Customer pays for shipping fees to China while we pay shipping fees to customer. But within warranty time (3 years), customer does not need to pay any fees. And no other fees will be charged for calibration or repair work.

Q12: Does the OTDR FF-980REV support active (live) fiber testing?
A12: No, Normal model does not support active fiber testing, but we accept OEM for bulk order.

Q13: Is it easy to be damaged when the OTDR drops from high position?
A13: The screen of the OTDR is made from enhanced PVC plastic, instead of traditional glass. So it is not easy to be damaged. Please visit the link for a video demo drops from 2.5 meters height postion. https://youtu.be/ujacRXyJevw

Q14: does the output laser from OTDR destroy CPEs (eg, ONU/ONT)?
A14: No. From OTDR theory, it can not shine out enough strong laser to destroy any other equipment. The output power of OTDR is very low to keep itself sensitive to get and analysis back-scattering light along fiber cable. We take a video to show you how the low output power value from the OTDR. To get highest power value of OTDR, we set the pulse width in OTDR to 20000us, and from power meter, you can see the highest power value is around -28dBm. While take Huawei’s ONU HG8310M for example, the allowed maximum input power is -8dBm. -28dBm output power of OTDR is much lower than -8dBm. So, even though OTDR launches power into ONT directly, it won’t damage CPE. Visit the video please. https://youtu.be/65-_dJ3TDhc

Q15: Does the OTDR can generate .sor file and print out testing report?
A15: Yes. Like any other normal OTDR. The FF-980REV can generate .sor files, and users can print testing report via PC software.

Q16: Could you provide technical support or training service on the OTDR?
A16: Yes, I can help if you have any questions on the OTDR.

Q17: Could you make OEM service? I want to make my logo on your OTDR?
A17: Yes, of course. Please contact our sales team. sales@FirstFiber.cn

Q18: Why I can not see A-B distance and attenuation value on PC software?
A18: Please contact us our sales to get a new PC software.

Q19: User can switch languages on OTDR?
A19: The OTDR comes with English in default. If you need it with other languages, please contact our sales to check if your language available or not.

Q20: I am a distributor in our local market. I am interested in marketing the OTDR here. Could you do OEM for me? I mean making booting screen with my logo, print logo on front panel of the device, and lable my model number.
A20: Yes, of course. We support OEM, and can customize device for customers. Please contact us for more details sales@firstfiber.cn

Q21: How is the OTDR workable for aerial cable works

Q23: Please confirm OTDR ability to provide in-service communication check before testing with message warning and auto termination functions to effectively protect test instruments and communications as well as CPEs
A23: Yes, confirmed. It will display a warning message on screen, but to protect laser diode, please make sure the power value to OTDR port does not over -5dBm. Strongly suggest that all users test power value by “OPM” function on the device before they use OTDR function.

Q24: Could you please state the type, capacity and weight of OTDR battery?
A24: Lithium Ion Battery(with battery certificate for security shipment), 3.7V-4000mAH/14.8WH

Q25: Why FF-980REV OTDR can not be turned on?
A25: Some customers complain that their FF-980REV OTDR can not be turned on any more. The problem was often caused by not right operating on the OTDR when they test RJ45 cables. Please do not test RJ45 cables if signals exist in RJ45 cable. To proof, please do as following steps,
1) Disassemble the device.
2) Press and hold power on button, and meantime, checking the voltage of TP11 point. It should be around 5.2V. Watch the video.
3) Remove N10 and N15
Now, OTDR should be ok to turned on. But RJ45 sequence and RJ45 length functions do not work. Other functions works in right situation. Please contact us to have new N10 and N15.

Q25: The VFL in OTDR FF-980REV is very week. How to solve it?
A25: The problem was caused by broken VFL laser. VFL laser has to be changed.

Q26: FF-980REV OTDR curve is ok, but there is nothing in event list area
A26: This issue should be caused by incorrect threshold value. Please reset all parameters to factory setting.

	ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.			CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.
	RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.			FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC’s jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.

• Информация
• Код товара: ff-980