7.
Foot Switch Jacks
On the Powerpod 740 Deluxe, the foot switch jack
allows the user to remotely turn the digital effects
on and off. The Powerpod 062 Deluxe features 2
footswitch jacks, the top jack is used to turn effects
on and off, whereas the bottom jack is used to ad-
just tap delay properties.
8.
EFX (Effect) Outputs
These 1/4″ TS outputs are the final output from the
EFX send mixing bus. This feed may be used to
connect to an external digital effect processor, or
even to an amplifier and speakers, depending on
your desired settings.
9.
Monitor Outputs
These 1/4″ TS outputs are the final
output from the Monitor send mix-
ing bus. This feed may be used to
connect to an amplifier and speak-
er. Feeding the output from the
Monitor out to an amplifier (and
possibly an equalizer) and then
to a floor monitor speaker allows
artists to monitor their own instru-
ments or vocals whilst performing,
or an engineer to monitor the mix.
0. Main Outputs
This output will send the final stereo line level signal
from the main mix. The primary purpose of these
jacks is to send the Main signal to external devices
that may run in parallel with the mixer. This may in-
clude additional power amplifiers, other mixers, PA
systems, as well as a wide range of other possible
signal processors.
Rear Panel
. Speaker Outputs
These jacks are used to connect to speakers, fed
from the internal power amp. Both the Powerpod
740 and 062 Deluxe feature /4″ phone jacks.
The Amp Select switch determines the operation
of these jacks. If the Amp Select switch is set to
«Moni / Main» or «Main / Main 2» a single speaker
with a 4 to 8 ohm load can be connected to jack A
on both the Main and Main 2 speaker outputs, or
two speakers with a load between 8 and 6 ohms
can be connected to both jacks A and B. When
using Bridge Mono mode, use the speaker output
labeled «(L+R) Bridge» only to connect a speaker
with a loading between 8 and 6 ohms. Refer to the
POWERPOD 740 / 062 DELUXE
8
7
7
Speaker set up chart to the right for more detailed
Indication of how to connect speakers.
NB. Due to the fact that the signal has been processed by the
power amp, these ports should be used in conjunction
with passive speakers only to avoid damaging any other
equipment.
0
9
Not used
Not used
Not used
Not used
7
|
Detail Specifications: 599/599763-powerpod_740_deluxe_users_manual.pdf file (04 Mar 2023) |
Accompanying Data:
Phonic POWERPOD 740 DELUXE Music Mixer PDF Operation & User’s Manual (Updated: Saturday 4th of March 2023 10:32:12 AM)
Rating: 4.1 (rated by 44 users)
Compatible devices: Powerpod 740 Plus, POWERPOD 885 PLUS, MX300USB, MM1002a, Powerpod 865 Plus, HELIX BOARD 24 FIREWIRE, AM55, POWERPOD 620R.
Recommended Documentation:
Text Version of Operation & User’s Manual
(Ocr-Read Summary of Contents, UPD: 04 March 2023)
-
15, Phonic POWERPOD 740 DELUXE 15 POWERPOD 740 / 1062 DELUXE Frequency Response 20Hz~20KHz, line level o/p @ +4 dBu into 600 ohms +0/-2 dB +0/-2 dB 20Hz~20KHz, power amp o/p 1 Watt into 8 ohms +0/-2 dB +0/-2 dB Crosstalk (@ 1 KHz) Adjacent inputs or input to output <-90 dB <-90 dB Noise Master fader down <-78 dBu <-78 dBu Master fader 0 dB, ch. fad- ers down <-63 dBu <-63 …
-
14, 14 POWERPOD 740 / 1062 DELUXE SPECIFICATIONS PHONIC Powerpod 740 Deluxe PHONIC Powerpod 1062 Deluxe Power Amplier Power Channels 2 2 Limiters 2 2 8-Ohm Load per Channel 145 Watts 200 Watts 4-Ohm Load per Channel 220 Watts 375 Watts 4-Ohms Bridged Mono 440 Watts 750 Watts Inputs Mono Mic/Line Channels 7 6 Stereo 0 3 Super Hi-Z Inputs 0 2 Tape in Stereo RCA, Mini-Jack S…
-
9, 9 POWERPOD 740 / 1062 DELUXE Digital Effect Processor 20. Digital Effect Display This panel displays the titles of different effects that can be added to audio. When you select the effect, the LED imbedded next to the effect name will illu- minate and the alteration be applied automatically. 21. Peak Indicators (Powerpod 1062 Deluxe only) Located within the Digital Effect Di…
-
11, 11 POWERPOD 740 / 1062 DELUXE Rear Panel 38. Power Button The power button, located on the rear of the mixer, is used to activate the mixer. 39. AC Power Connector / Cord The AC connector is included to ensure your Mixer gets the power it needs. Please use the power cable that is included with this mixer only. Located just below the AC power connecto…
-
5, Phonic POWERPOD 740 DELUXE 5 POWERPOD 740 / 1062 DELUXE BASIC SETUP Getting Started 1. Turn all power off on the Powerpod Mixer. To ensure this, the AC cable should not be connected to the unit. 2. All faders and level controls should be set at the lowest level to ensure no sound is inadvertently sent through the outputs when the device is switched on. All levels should be altered to…
-
16, 16 POWERPOD 740 / 1062 DELUXE DIGITAL EFFECT TABLES POWERPOD 1062 DELUXE Program Parameter Variable Range 1 Hall Reverb Time 0.3 — 10 sec 2 Room Reverb Time 0.3 — 10 sec 3 Plate Reverb Time 0.3 — 10 sec 4 Cathedral Reverb Time 0.3 — 10 sec 5 Arena Reverb Time 0.3 — 10 sec 6 Spring Reverb Time 0.3 — 10 sec 7 Opera Reverb Time 0.3 — 10 sec 8 Rev Vocal Reverb Time 0.3 — 10…
-
12, 12 POWERPOD 740 / 1062 DELUXE APPLICATION POWERPOD 740 DELUXE MICROPHONE ELECTRIC GUITAR BASS DRUM MACHINE PC ACTIVE SPEAKER
… -
7, 7 POWERPOD 740 / 1062 DELUXE 8 7 7. Foot Switch Jacks On the Powerpod 740 Deluxe, the foot switch jack allows the user to remotely turn the digital effects on and off. The Powerpod 1062 Deluxe features 2 footswitch jacks, the top jack is used to turn effects on and off, whereas the bottom jack is used to ad- just tap delay properties. 8. EFX (Effect) Outputs Th…
-
10, Phonic POWERPOD 740 DELUXE 10 POWERPOD 740 / 1062 DELUXE 28. EQ IN and Indicator This button activates the equalizer in which it accom- panies. The corresponding LED indicator illuminates when the EQ is activated. 29. EQ Select Switch This switch enables you to select the way you utilize the pair of Equalizers on these models. When the switch is in the uppermost position it enables you to use the top equa…
Recommended Instructions:
XS-MP1620B Marketing, DSLR-A300/A350, VP112, RV-DP100BK
-
MX-5200 SERIESPROFESSIONAL MIXING CONSOLESSERVICE MANUALCONTENTSSpecificationsMeter calibrationBus configurationPanel removal & interconnectsParts Lists:Input I/O PCB AssemblyInput Channels PCB AssemblyInput Panel AssemblyOutput I/O PCB AssemblyOutput PCB AssemblyOutput Panel AssemblyChassis AssemblyPower Supply PCB Assembly Rev APower Supply PCB Assembly Rev BPower Supply …
MX-5200 25
-
–15+15HIGHMIDLOWLEVELMONITOREFFECT–15+15–15+150+150+15010PAD–15+151HIGHMIDLOWLEVELMONITOREFFECT–15+15–15+150+150+150101PAD2PAD–15+153HIGHMIDLOWLEVELMONITOREFFECT–15+15–15+150+150+150103PAD454PAD5PAD6612112212EEEngineSEE REAR PANEL CAUTIONHi-ZHi-ZHi-ZHi-ZLow-ZLow-ZLow-ZLow-ZLINEMICMICSuper Hi-ZEFFECT OUTFOOT SWAUX ININPUT TO MAINOUT PUT2TRINRECOUTMAINMO …
powered mixer 31
-
User Guide English ( 3 – 7 ) Guía del usuario Español ( 8 –11 ) Guide d’utilisation Français ( 12 – 16 ) Guida per l’uso Italiano ( 17 – 21 ) Benutzerhandbuch Deutsch ( 22 – 26 ) Appendix English ( 27 ) …
MIXTRACK3 28
Additional Information:
Popular Right Now:
Operating Impressions, Questions and Answers:
Welcome to ManualMachine
You have been successfully registered
We have sent a verification link to to complete your registration.
If you can’t find the email, check your Junk/Spam folder.
- Buy Points
- How it Works
- FAQ
- Contact Us
- Questions and Suggestions
- Users
Loading…
You can only view or download manuals with
Sign Up and get 5 for free
Upload your files to the site. You get 1 for each file you add
Get 1 for every time someone downloads your manual
Buy as many as you need
View and download manuals available only for
Register and get 5 for free
Upload manuals that we do not have and get 1 for each file
Get 1 for every download of your manual
Buy as much as you need
Table of Contents for Phonic POWERPOD 740 DELUXE:
-
9 POWERPOD 740 / 1062 DELUXE Digital Effect Processor 20. Digital Effect Display This panel displays the titles of different effects that can be added to audio. When you select the effect, the LED imbedded next to the effect name will illu- minate and the alteration be applied automatically. 21. Peak Indicators (Powerpod 1062 Deluxe only) Located within the Digital Effect Display is Peak LEDs. The Peak LED will
-
18 POWERPOD 740 / 1062 DELUXE BLOCK DIAGRAM POWERPOD 740 DELUXE
-
13 POWERPOD 740 / 1062 DELUXE APPLICATION POWERPOD 1062 DELUXE MICROPHONE ELECTRIC GUITAR BASS PC ACTIVE SPEAKER MONITOR DRUM MACHINE
-
12 POWERPOD 740 / 1062 DELUXE APPLICATION POWERPOD 740 DELUXE MICROPHONE ELECTRIC GUITAR BASS DRUM MACHINE PC ACTIVE SPEAKER
-
15 POWERPOD 740 / 1062 DELUXE Frequency Response 20Hz~20KHz, line level o/p @ +4 dBu into 600 ohms +0/-2 dB +0/-2 dB 20Hz~20KHz, power amp o/p 1 Watt into 8 ohms +0/-2 dB +0/-2 dB Crosstalk (@ 1 KHz) Adjacent inputs or input to output <-90 dB <-90 dB Noise Master fader down <-78 dBu <-78 dBu Master fader 0 dB, ch. fad- ers down <-63 dBu <-63 dBu Total Harmonic Distor- tion (THD) Mic input to main mix output @ +14 dBu <0.5%, 4 ohms, @60 Watts <0.5%, 4 ohms, @60
-
20 POWERPOD 740 / 1062 DELUXE 6103 Johns Road #7
-
21 POWERPOD 740 / 1062 DELUXE
-
17 POWERPOD 740 / 1062 DELUXE DIMENSIONS POWERPOD 740 Deluxe POWERPOD 1062 Deluxe 471 mm (18.5 inches) 265 mm (10.4 inches) 275 mm (10.8 inches) 471 mm (18.5 inches) 285 mm (11.2 inches) 275 mm (10.8 inches) WEIGHT POWERPOD 740 Deluxe POWERPOD 1062 Deluxe 13.5 kg (29.7 ibs) 14 kg (30.8 ibs)
-
16 POWERPOD 740 / 1062 DELUXE DIGITAL EFFECT TABLES POWERPOD 1062 DELUXE Program Parameter Variable Range 1 Hall Reverb Time 0.3 — 10 sec 2 Room Reverb Time 0.3 — 10 sec 3 Plate Reverb Time 0.3 — 10 sec 4 Cathedral Reverb Time 0.3 — 10 sec 5 Arena Reverb Time 0.3 — 10 sec 6 Spring Reverb Time 0.3 — 10 sec 7 Opera Reverb Time 0.3 — 10 sec 8 Rev Vocal Reverb Time 0.3 — 10 sec 9 Delay 1 (One Repeat) Delay Time 0 — 800 ms 10 Echo Delay Time 0 — 800 ms 11 Multi-Pong Delay Time 0
-
10 POWERPOD 740 / 1062 DELUXE 28. EQ IN and Indicator This button activates the equalizer in which it accom- panies. The corresponding LED indicator illuminates when the EQ is activated. 29. EQ Select Switch This switch enables you to select the way you utilize the pair of Equalizers on these models. When the switch is in the uppermost position it enables you to use the top equalizer for the Monitor signal and the lower equalizer for the Main mix. In the lower position, the equalizers a
-
14 POWERPOD 740 / 1062 DELUXE SPECIFICATIONS PHONIC Powerpod 740 Deluxe PHONIC Powerpod 1062 Deluxe Power Amplier Power Channels 2 2 Limiters 2 2 8-Ohm Load per Channel 145 Watts 200 Watts 4-Ohm Load per Channel 220 Watts 375 Watts 4-Ohms Bridged Mono 440 Watts 750 Watts Inputs Mono Mic/Line Channels 7 6 Stereo 0 3 Super Hi-Z Inputs 0 2 Tape in Stereo RCA, Mini-Jack Stereo RCA, Mini-Jack Aux in 1 2 Outputs Speaker Outputs 5 TRS 1/4” 5 TRS 1/4” Main Mix (Line) Level 1 TRS 1/4” 2 T
-
1. Read these instructions before operating this apparatus. 2. Keep these instructions for future reference. 3. Heed all warnings to ensure safe operation. 4. Follow all instructions provided in this document. 5. Do not use this apparatus near water or in locations where condensation may occur. 6. Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning. 7. Do not block any of the ventilation openings. Install in accord
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Phonic POWERPOD 740 DELUXE device using right now.
User Manuals, Guides and Specifications for your Phonic POWERPOD 740 DELUXE Music Mixer. Database contains 1 Phonic POWERPOD 740 DELUXE Manuals (available for free online viewing or downloading in PDF): Operation & user’s manual .
