Pioneer xc is22cd инструкция на русском

Pioneer XC-IS22CD Operating Instructions Manual

  • Contents

  • Table of Contents

  • Troubleshooting

  • Bookmarks

Quick Links

CD TUNER DECK

XC-IS22CD

STEREO POWER AMPLIFIER

M-IS22

SPEAKER SYSTEM

S-IS22

Operating Instructions

loading

Related Manuals for Pioneer XC-IS22CD

Summary of Contents for Pioneer XC-IS22CD

  • Page 1
    CD TUNER DECK XC-IS22CD STEREO POWER AMPLIFIER M-IS22 SPEAKER SYSTEM S-IS22 Operating Instructions…
  • Page 2
    VENTILATION: When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 30 cm at top, 15 cm at Operating Environment rear, and 15 cm at each side). H045 En WARNING: Operating environment temperature and humidity: Slot and openings in the cabinet are °…
  • Page 3: Table Of Contents

    Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

  • Page 4: Before You Start Checking What’s In The Box

    Using this manual may become unreliable if strong This manual is for the XC-IS22CD Stereo CD Tuner Deck. It is sunlight or fluorescent light is shining on the unit’s remote split into three sections: setting up (chapters 1 and 2); using the sensor.

  • Page 5: Avoiding Condensation Problems

    Before you start Avoiding condensation problems Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.

  • Page 6: Connecting Up The Rear Panel

    Connecting up The rear panel Important Before making or changing any rear panel connections, make The illustration on this page shows the XC-IS22CD. sure that all the components are switched off and unplugged from the power supply. Main unit Speaker caution!

  • Page 7: Connecting The Speakers

    Connecting up Connecting the radio Connecting the speakers Use the supplied red and black speaker cords to connect the antennas speakers to the main unit. To get the best sound from the Connecting the supplied antennas will allow you to listen to system, it’s important that you connect the two strands of both AM and FM radio broadcasts.

  • Page 8: Connecting External Antennas

    A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

  • Page 9: Connecting The Optional Stereo Cassette Deck (Ct-Is21)

    XC-IS21MD/XC-IS21T are different from the XC- this system using the system cable and two sets of RCA pin-plug IS22CD, the controls of the XC-IS22CD function in the same stereo cables supplied with the CT-IS21. way as those on the XC-IS21MD/XC-IS21T.

  • Page 10: Controls And Displays Front Panel

    Controls and displays Front Panel This illustration is European model. OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD T APE ENHANCE BALANCE POWER AMPLIFIER M-IS22 AERO DUCT CONSTRUCTION BASS TREBLE TUNER LINE1.2 STANDBY/ON STANDBY 25 ST.MEMORY•STOP 7 (p. 13, 15, 17, 18, 20) 1 OPEN/CLOSE touch sensor (p.

  • Page 11: Display

    Controls and displays Display TUNED STEREO RDS B.CUT ASES MONO 10 2 NR Lights when Dolby B Noise Reduction is on 1 B.CUT Lights when beat cut 2 is active (p. 21) 1 1 ” Indicates the reverse mode (“, [ or ”) 2 STEREO Lights when listening to FM stereo radio 12 TAPE 23 Indicates the direction of tape travel (2 (reverse) 3 TUNED Lights when tuned to a radio broadcast…

  • Page 12: Getting Started

    Getting started OPEN/ CLOSE POWER AMPLIFIER M-IS22 STEREO CD TUNER DECK XC-IS22CD AERO DUCT CONSTRUCTION T APE ENHANCE FOLDER/TRACK STANDBY/ON BASS TREBLE STANDBY TUNER LINE1.2 Switching on and setting the Changing the clock format You can choose to display the clock in either 12 or 24 hour clock formats.

  • Page 13: Playing Cds

    Getting started OPEN/CLOSE OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 SLEEP PROGRAM RANDOM REPEAT T APE ENHANCE FOLDER/TRACK SONUD MODE MONO Label surface BASS TREBLE TUNER LINE1.2 CD spindle Playing CDs…

  • Page 14: Tuning In Stations

    Getting started OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 SLEEP PROGRAM RANDOM REPEAT T APE ENHANCE FOLDER/TRACK SONUD MODE MONO BASS TREBLE TUNER LINE1.2 Tuning in stations Improving poor FM reception If you’re listening to an FM station in stereo but the reception is…

  • Page 15: Playing Cassette Tapes

    Getting started OPEN/ CLOSE STEREO CD TUNER DECK XC-IS22CD STANDBY DIMER MUTE DISP TUNER LINE1.2 OPEN/CLOSE CLEAR >10 10/0 TAPE SLEEP PROGRAM RANDOM REPEAT OPEN/CLOSE0 T APE ENHANCE FOLDER/TRACK SONUD MODE MONO BASS TREBLE TUNER LINE1.2 Playing cassette tapes To skip back or forward a track on the tape, press –…

  • Page 16: Changing Displays

    Getting started Changing displays CD displays It is possible to switch the display information while using tape, • When using the CD function, press DISP(/RDS) to CD, or tuner functions. cycle through display information. During CD playback: When CD is stopped: Tuner displays •…

  • Page 17: More Cd Features Programming The Cd Track Order

    More CD features Programming the CD track Playing tracks at random order Selecting random play leaves the track order of the disc up to the player. Each track on the disc is played just once, but in a Programming the track order means telling the player precisely random order.

  • Page 18: More Tuner Features Saving Stations For Quick Recall

    More tuner features Saving stations for quick Using RDS (UK model only) recall Radio Data System, or RDS as it’s usually known, is a system used by FM radio stations to provide listeners with various You can save up to 30 station presets so that you always have information—the name of the station and what kind of show easy access to your favorite stations without having to tune in they’re broadcasting, for example.

  • Page 19: Displaying Rds Information

    More tuner features LEISURE Leisure interests and hobbies Note • The RDS indicator will light in the RDS mode. JAZZ Jazz music COUNTRY Country music • If no RDS signal can be received, the message NO DATA NATION M Popular music in a language other than will be displayed.

  • Page 20: Making Tape Recordings

    Making tape recordings Making tape recordings Select the function you plan to record. For example, press to record from the radio. If you’ve TUNER You can make tape recordings from the radio, CDs, or from an selected a CD, make sure that it’s stopped. You cannot record external component connected to the auxiliary inputs.

  • Page 21: Improving Am Tape Recordings

    Making tape recordings Improving AM tape recordings Recording AM broadcasts on cassette tape can result in noisy recordings. If you experience this, change the beat cut mode. Switch the system into standby. Press REC/STOP for about 3 seconds. Release when the display reads if you have previously switched the beat cut mode).

  • Page 22: Adjusting The Sound Adjusting The Bass, Treble And Balance

    Adjusting the sound Using the timer Adjusting the bass, treble Setting the wake-up timer and balance Use the wake-up timer to set the system to switch on at any time and start playing your choice of source. To help you get the sound you want you can increase or reduce Note the bass and treble, or change the left/right balance.

  • Page 23: Setting The Sleep Timer

    Using the timer Setting the sleep timer Set the record end time. Use the dial to set the hour, then press . Set the minute The sleep timer switches off the system after a specified time so in the same way, pressing when you’re done.

  • Page 24: Additional Information Taking Care Of Your System

    This system is designed for use with conventional, fully Taking care of your discs circular CDs only. Use of shaped discs is not recommended. PIONEER disclaims all liability arising in connection with the When holding discs, take care not to leave fingerprints, dirt or use of shaped discs.

  • Page 25: Using Cassette Tapes

    • Make sure that the head cleaning cassette you buy is (about the first 3 or 4 seconds of each side). compatible with auto-reverse decks. Check with a Pioneer authorized service center for details. • Do not use dry-type head cleaning cassettes.

  • Page 26: Troubleshooting

    Additional information Troubleshooting Problem Remedy General No sound • Check that speakers and other system components are properly connected. • Check that the input selector is set correctly. Can’t switch between functions • If the cassette deck is currently recording, you can’t change the function. Timer doesn’t work •…

  • Page 27: Specifications

    CD Tuner Deck ……204 (W) x 300 (H) x 237 (D) mm Power Amplifier …… 160 (W) x 300 (H) x 237 (D) mm Weight: CD Tuner Deck …………..2.7 kg Power Amplifier …………..4.1 kg Published by Pioneer Corporation. Copyright © 2001 Pioneer Corporation. All rights reserved.

  • Page 28: Demonstration Function

    Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P. 03100 TEL: 5-688-52-90 <TSWZW/01C00001>…

Operating Environment

Operating environment temperature and humidity:

°

°

°

+5

C – +35

C (+41

F – +95

vents not blocked)

Do not install in the following locations

• Location exposed to direct sunlight or strong artificial

light

• Location exposed to high humidity, or poorly ventilated

location

2

En

H045 En

°

F); less than 85%RH (cooling

VENTILATION:

When installing this unit, make

sure to leave space around the unit for ventilation to

improve heat radiation (at least 30 cm at top, 15 cm at

rear, and 15 cm at each side).

WARNING:

Slot and openings in the cabinet are

provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, to prevent fire hazard, the openings

should never be blocked and covered with items, such

as newspapers, table-cloths, curtains, etc. Also do not

put the apparatus on the thick carpet, bed, sofa, or

fabric having a thick pile.

H040 En

центр неплох, но уже подустарел морально. установлен люминисцентный индикатор, но это на любителя. по-моему, не хватает динамики в быстрых композициях и не хватает воздушности, звук как бы зажат. рок и электроника вполне устраивают. а с басами небольшой перебор. они очень явные.

Достоинства: Реально мощный центр. Раскачивает колонки на раз. имеется кассетная дека, имеется обычный сидюк. нравится оригинальный механизм загрузки диска, 2-х блочная конструкция, стильный внешний вид и подсветка компонентов. есть пульт ДУ.

Недостатки: если отключен от сети, то стираются настройки радиостанций, и настройки звука. МПЗ отсутствует. мало настроек эквалайзера. колонки из ДСП. а передняя панель — пластиковая.

Ожидается изображения товара

249 

Инструкция (руководство пользователя) на Музыкальный центр Pioneer XC-IS22CD

Артикул: pioneer-xc-is22cd

Категория: Pioneer

  • Описание

  • Детали

Описание

Инструкцию по эксплуатации Pioneer XC-IS22CD на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.

Детали

Формат файла

PDF

Размер инструкции в кб

2068

Содержание

  1. Pioneer IS-22
  2. Самые выгодные предложения по Pioneer IS-22
  3. Отзывы про Pioneer IS-22
  4. Pioneer XCIS-22-CD Service manual
  5. Pioneer XC-IS22CD Operating Instructions Manual
  6. Pioneer XC-IS22CD Manual Information:
  7. More Manuals:

Pioneer IS-22

  • минисистема
  • мощность 2×100 Вт
  • воспроизведение CD
  • радиоприемник AM, FM
  • однокассетная дека
  • подключение наушников

Средний рейтинг Pioneer IS-22 — 4
Всего известно о 1 отзывах о Pioneer IS-22

Ищете положительные и негативные отзывы о Pioneer IS-22?

Из 11 источников мы собрали 1 отрицательных, негативных и положительных отзывов.

Мы покажем все достоинства и недостатки Pioneer IS-22 выявленные при использовании пользователями. Мы ничего не скрываем и размещаем все положительные и отрицательные честные отзывы покупателей о Pioneer IS-22, а также предлагаем альтернативные товары аналоги. А стоит ли покупать — решение только за Вами!

Самые выгодные предложения по Pioneer IS-22

Отзывы про Pioneer IS-22

Достоинства:
Реально мощный центр. Раскачивает колонки на раз. имеется кассетная дека, имеется обычный сидюк. нравится оригинальный механизм загрузки диска, 2-х блочная конструкция, стильный внешний вид и подсветка компонентов. есть пульт ДУ.

Недостатки:
если отключен от сети, то стираются настройки радиостанций, и настройки звука. МПЗ отсутствует. мало настроек эквалайзера. колонки из ДСП. а передняя панель — пластиковая.

Комментарий:
центр неплох, но уже подустарел морально. установлен люминисцентный индикатор, но это на любителя. по-моему, не хватает динамики в быстрых композициях и не хватает воздушности, звук как бы зажат. рок и электроника вполне устраивают. а с басами небольшой перебор. они очень явные.

Источник

Pioneer XCIS-22-CD Service manual

FRONT LOADING TRAY

DIGITAL OUT LINE2 OUT

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

DC power supply from other system

DC power supply from other system

This product is a system(s) component.

This product does not function properly when independent; to avoid malfunctions, be sure to connect it to the prescribed system component(s), otherwise damage may result.

This service manual

STEREO POWER AMPLIFIER

2. EXPLODED VIEWS AND PARTS LIST

7.1.1 SEQUENCE AFTER THE POWER ON . 55

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 12

7.1.2 SINGLE OPERATION METHOD

PCB CONNECTION DIAGRAM .

7.1.3 TROUBLE SHOOTING .

8. PANEL FACILITIES AND SPECIFICATIONS

PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.

PIONEER ELECTRONIC NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Allexandra Road, #04-01, Singapore 159936 c PIONEER ELECTRONIC CORPORATION 2001

T – ZZY APR. 2001 Printed in Japan

1. SAFETY INFORMATION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual.

Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.

THIS PIONEER APPARATUS CONTAINS

LASER DIODE CHARACTERISTICS

LASER OF CLASS 1.

MAXIMUM OUTPUT POWER: 5 mW

SERVICING OPERATION OF THE APPARATUS

WAVELENGTH: 708-785 nm

S H O U L D B E D O N E B Y A S P E C I A L L Y

Additional Laser Caution

1. Laser Interlock Mechanism

The loading position detect switch (in CD mechanism assembly) is set to «CLMP ON(CD CLOSE)» (ON:low level,OFF:high level) position, the system control IC(IC5501) get the «CLMP» signal, and hand the laser «LDON» signal to IC1101.

Then a laser diode can be lighted except when the level of

signal CLMP is low.

The interlock also does not function in the test mode . Laser diode oscillation will continue, if pin 1 of TA2150FN (IC1101) on the CD ASSY is connected to GND, or pin 10 is connected to low level (ON), or else the terminals of

Q1101 are shorted to each other (fault condition).

2. When the cover is opened, close viewing of the objective lens with the naked eye will cause exposure to a Class 1 laser beam.

: Refer to page 52.

2. EXPLODED VIEWS and PARTS LIST

Parts marked by «NSP» are generally unavailable because they are not in our Master Spare Parts List.

The mark found on some component parts indicates the importance of the safety factor of the part.

Therefore, when replacing, be sure to use parts of identical designation.

Screws adjacent to mark on the product are used for disassembly.

Источник

Pioneer XC-IS22CD Operating Instructions Manual

Download or browse on-line these Operating Instructions Manual for Pioneer XC-IS22CD Amplifier, Car Receiver.

Pioneer XC-IS22CD Manual Information:

This manual for Pioneer XC-IS22CD, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 28 pages, and the size of the file at download is . The document type is Operating Instructions Manual.

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Pioneer XC-IS22CD. Just click one of the links below to go to the selected manual:

[Page 1] Pioneer XC-IS22CD Manual

CD TUNER DECK XC-IS22CD M-IS22 S-IS22 STEREO POWER AMPLIFIER SPEAKER SYSTEM Operating Instructions .

[Page 2] Pioneer XC-IS22CD Manual

2 En VENTILATION: When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 30 cm at top, 15 cm at rear, and 15 cm at each side). WARNING: Slot and openings in the cabinet are provided f.

[Page 3] Pioneer XC-IS22CD Manual

3 En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

[Page 4] Pioneer XC-IS22CD Manual

4 En Before you start 1 Finding a suitable location We want you to enjoy using your new stereo system for years to come, so please bear in mind the following points when choosing a suitable location for the system components and speakers: Do. ✔ U.

[Page 5] Pioneer XC-IS22CD Manual

1 5 En Before you start Avoiding condensation problems Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the unit, it may te.

[Page 6] Pioneer XC-IS22CD Manual

Connecting up 6 En 2 OUT IN LINE 1 AUDIO OUT TO AMPLIFIER RL RL TO XC-IS22CD IN Power Amplifier CD Tuner Deck The rear panel The illustration on this page shows the XC-IS22CD. Main unit 1 Right speaker 2 Power amplifier 3 CD tuner deck 4 Left speaker.

[Page 7] Pioneer XC-IS22CD Manual

2 7 En Connecting up Connecting the speakers Use the supplied red and black speaker cords to connect the speakers to the main unit. To get the best sound from the system, it’s important that you connect the two strands of speaker cord for each spea.

[Page 8] Pioneer XC-IS22CD Manual

Connecting up 8 En 2 Note The signal ground (H) is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety ground. Connecting external antennas External AM antenna Use 5–6 meters of vinyl-insulated wire and.

[Page 9] Pioneer XC-IS22CD Manual

2 9 En Connecting up FROM OPTION DECK OUT IN LINE 1 TO AMPLIFIER 1 2 3 CT-IS21 Using this system with the CT-IS21 The instruction manual supplied with the CT-IS21 describes its use with the XC-IS21MD/XC-IS21T. Use with the XC-IS22CD is similar, thoug.

[Page 10] Pioneer XC-IS22CD Manual

10 En Controls and displays 3 25 ST.MEMORY•STOP 7 (p. 13, 15, 17, 18, 20) 26 REVERSE MODE (p. 12, 15) 27 1 • 4 • TUNING – (p. 13-15, 18) 28 DISP (Australian model) (p. 16) DISP/RDS (UK model) 29 Bass level meter/mute indicator (Except UK mode.

[Page 11] Pioneer XC-IS22CD Manual

3 11 En Controls and displays kHz MHz NR 2 TUNED STEREO RDS B.CUT ASES MONO PROGRAM RANDOM REPEAT SRS ONE 14 151617 18 19 321 4 5 6 7 9 10 8 13 12 11 Display 1 TUNER (p. 12, 14, 18, 23) 2 DIMMER (p. 16) 3 MUTE (p. 22) 4 LINE 1.2 (p. 12) 5 .

[Page 12] Pioneer XC-IS22CD Manual

12 En Getting started 4 Automatic power on buttons There are a number of buttons other than STANDBY/ON which will switch the unit on. • CD, TUNER, TAPE, and LINE 1.2 switch the unit on directly in to that function. (In the case of CD and TAPE, if t.

[Page 13] Pioneer XC-IS22CD Manual

4 13 En Getting started Playing CDs 1 Press the CD button then lightly press the OPEN/ CLOSE sensor (0 on the remote). The CD cover opens. Push a CD, with the label face out, onto the disc spindle. 2 Lightly press the OPEN/CLOSE sensor (or 0) again t.

[Page 14] Pioneer XC-IS22CD Manual

14 En Getting started 4 Tuning in stations The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen. (See page 18) 1 Press TUNER to switch to t.

[Page 15] Pioneer XC-IS22CD Manual

4 15 En Getting started FOLDER/TRACKENHANCE R E V E R S E M O D E D I S P 2 – V O L . / J O G + 3 S E T T I M E R / C L O C K A D J A S E S R E C / S T O P 1 · 4 · T U N I N G – + T U N I N G · ¢ · ¡ BASS TREBLE CD TUNER TAPE LINE1.2 D O L .

[Page 16] Pioneer XC-IS22CD Manual

16 En Getting started 4 CD displays • When using the CD function, press DISP(/RDS) to cycle through display information. * Tape counter display only appears while tape recording. ** Does not appear during random play. While a disc is stopped, you c.

[Page 17] Pioneer XC-IS22CD Manual

5 17 En More CD features Programming the CD track order Programming the track order means telling the player precisely which tracks, and in what order, you want played. You can make a program of up to 24 tracks, playing tracks more than once if you l.

[Page 18] Pioneer XC-IS22CD Manual

18 En More tuner features 6 Using RDS (UK model only) Radio Data System, or RDS as it’s usually known, is a system used by FM radio stations to provide listeners with various information—the name of the station and what kind of show they’re bro.

[Page 19] Pioneer XC-IS22CD Manual

6 19 En More tuner features Note • The RDS indicator will light in the RDS mode. • If no RDS signal can be received, the NO DATA message will be displayed. • If there is noise during the RT scroll display when in the RT mode, some characters ma.

[Page 20] Pioneer XC-IS22CD Manual

20 En Making tape recordings 7 5 Select the function you plan to record. For example, press TUNER to record from the radio. If you’ve selected a CD, make sure that it’s stopped. You cannot record while the TA P E function is selected. 6 Prepare .

[Page 21] Pioneer XC-IS22CD Manual

7 21 En Making tape recordings Improving AM tape recordings Recording AM broadcasts on cassette tape can result in noisy recordings. If you experience this, change the beat cut mode. 1 Switch the system into standby. 2 Press REC/STOP for about 3 seco.

[Page 22] Pioneer XC-IS22CD Manual

22 En Adjusting the sound 8 Using the timer Setting the wake-up timer Use the wake-up timer to set the system to switch on at any time and start playing your choice of source. Note • The clock must be set to the correct time for the wake-up timer t.

[Page 23] Pioneer XC-IS22CD Manual

9 23 En Using the timer Setting the sleep timer The sleep timer switches off the system after a specified time so you can fall asleep without worrying about it. Note If you set the sleep timer while either the wake-up or record timer is active, the e.

[Page 24] Pioneer XC-IS22CD Manual

24 En Additional information 10 Taking care of your system To clean this unit, wipe with a soft, dry cloth. For stubborn dirt, wet a soft cloth with a mild detergent solution made by diluting one part detergent to 5 or 6 parts water, wring well, then.

[Page 25] Pioneer XC-IS22CD Manual

10 25 En Additional information Protecting your recordings You can protect an important recording against accidental erasure by breaking the erase-protect tab(s) with a small screwdriver. Erase-protect tab (For side A) Erase-protect tab (For side B) .

[Page 26] Pioneer XC-IS22CD Manual

26 En Additional information 10 Troubleshooting Problem General No sound Can’t switch between functions Timer doesn’t work Remote control doesn’t work Power doesn’t come on CD player CD won’t play Tuner Can’t tune into any radio stations .

[Page 27] Pioneer XC-IS22CD Manual

10 27 En Additional information Specifications Amplifier section Continuous Power (RMS) . 100 W + 100 W (1 kHz, THD 10%, 6 Ω) Continuous Power (DIN) . 65 W + 65 W (1 kHz, TH.

[Page 28] Pioneer XC-IS22CD Manual

Demonstration function The demonstration function starts automatically when the unit is plugged in, or if it has been sitting idle in the TAPE or CD function for more than 5 minutes. It stops once the unit is switched on or when you start playback. I.

Источник

Adblock
detector

Понравилась статья? Поделить с друзьями:
  • Инструкция как собрать самолетик из бумаги
  • Газ 31105 змз 406 руководство по ремонту
  • Должностная инструкция генерального директора строительного предприятия
  • Руководство системного администратора для windows
  • Divisat hobbit unit gx инструкция скачать