Прибор представляет собой недорогой автоматический проектор знаков с галогенной лампой и дистанционным пультом управления. Рабочее расстояние e CСР-3100 от 2.5 до 8 метров, что позволяет использовать его и в самых маленьких и больших кабинетах. ССР-3100 имеет 5 вариантов комплектов оптотипов: подковы и буквы «Ш», повернутые в разные стороны, картинки для детей, русский алфавит и цифры. Существенное преимущество ССР-3100 заключается в наличии у него большого количества специальных тестов. ССР-3100 имеет таблицы для проведения следующих тестов:
Функции ССР-3100
1) Тесты на форию.
2) Таблицы для теста на вертикальное и горизонтальное совпадение (Используется для определения анизектонии (различие в восприятии размеров объекта) и для коррекции вертикальной и горизонтальной форий).
3) Специальная таблица по Шоберу (Используется для коррекции гиперфории)
4) Таблицы горизонтальных и вертикальных линий для проведения тестов по Ф. Граффе (для вертикальной и горизонтальной форий).
5) Таблица решетки для уточнения сферической составляющей при зрении «вдаль».
6) Таблица стерео теста. Исследование проводится в поляризационных очках. Приобретается как дополнительная опция.
7) Специальная таблица для бинокулярного балансового теста.
Таблица для определения фории с фиксационными точками.
Таблица для определения фории с фиксационными точками. 9) Таблица с часовым диском для определения углов астигматизма.
10) Таблица с точками для цилиндрического теста с использованием кросс цилиндрических (XC) линз.
11) Красно/зеленая таблица.
12) Специальная четырех точечная таблица по Ворсу. Определение ведущего, ведомого галаза. Исследование бинокулярного зрения. Проиводится в крано-зеленых очках. Опция приробретается дополнительно.
Возможно управление показом слайдов с пульта электронного фороптора CDR-3100, что дает дополнительные удобства врачу и пациенту. Функция сохранения энергии выключает прибор после 10 мин бездействия. Цена и функциональность прибора очень привлекательны.
13) Проекция изображения на экран, обладающий поляризационным эффектом. Экран размером 400х500 мм. в комплекте поставки.
Технические характеристики ССР-3100
Параметры ССР-3100
Разрешающая спосособность……………………..50 линий на миллиметр
Рабочее состояние…………………………………….2.5 — 8 метров (на расстоянии 8 метров нужен
опциональный экран)
Количество слайдов, масок и оптотипов…….41 таблица — 34 маски, 5 вариантов комплектов
оптотипов.
Фильтры…………………………………………………….Красный/зеленый и поляризационный фильтры
Возможность фронтального угла наклона……+/- 15 градусов
Увеличение при проекции…………………………..21.5х (на расстоянии 5 м)
Возможность программирования…………………Возможно, самостоятельно программировать 2
программы до 30 элементов каждая или
пользоваться одной встроенной программой.
Время смены слайдов…………………………………0,15 сек.
Используемая лампа………………………………….. 6 В, 30 Вт.
Возможна поставка проектора знаков
с настенным креплением.
Подвижная конструкция дает
возможность легкого
позиционирования прибора.
Характеристики кронштейна:
1. Площадка крепления к стене — 180х70 мм.
2. Угол свободного перемещения относительно
крепления к стене — 180 градусов.
3. Вылет относительно осей вращения — 170 мм.
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Service Manual
Chart Projector CCP-3100
1
Related Manuals for Huvitz CCP-3100
Summary of Contents for Huvitz CCP-3100
-
Page 1
Service Manual Chart Projector CCP-3100… -
Page 2: How To Use The Manual
1. GENERAL 1-1 How to use the manual Use this manual in accordance with the following flowchart at the time of initial inspection or when inspection, adjustment or repair are needed to correct problems: Manual Operation sequence Reference Page Occurrence of Initial Inspection a problem P.
-
Page 3: Product Outline
2. PRODUCT OUTLINE 2-1 Nomenclature [Fig. 1 Front View with Remote Control] [Fig. 2 Rear View] 1. Focusing Wheel & Lens 2. IR receiving window 3.Stand(table mount) 4. Wireless remote control 5. RS-232 Comm.Port 6. Cover Release 7. AC Power Inlet 8.
-
Page 4: Position Of Chart Projector
2-2 Optical system (Layout Drawing) 2-2-1 Position of Chart Projector The single tube projector must be installed at the same distance from the screen as the patient. [Fig. 3 Installation without mirrors] Install chart projector at desired position within 2.5~8m (8~26 feet). Set the projection angle of chart processor based on Screen.
-
Page 5
2-3 Electrical Construction Diagram CDR-3100 OP SERIAL PORT (OPTION) CHART PI MOTOR ASSY ASSY(CHART) VOUT DC12V DC12V Mask PI ASSY CONTROL PCB ASSY MOTOR VOUT ASSY(M) DC12V DC12V INLET SWITCH 220V/AC RED 220V/AC FUSE 110V/AC BROWN 110V/AC TRANSFORMER FUSE 0V/AC 110/220V LAMP INPUT… -
Page 6: Basic Principle
2-4 Basic Principle 2-4-1 Visual angle ※ Optometric standards The circular symbol corresponding to a visual acuity of 1.0, has a notch forming a visual angle of 1’ when viewed from a distance of 5 m. General Chart: [Fig. 4 E2]…
-
Page 7: Pcb Layout Drawing
2-5 PCB layout drawing 2-5-1 CONTROL PCB PILOT LAMP < Fig E3 > To connect TRANSFORMER(18V/AC) ASSY(2pins) To communicate RS-232(3pins) To communicate CAN(2pins) To connect CHART PI ASSY(5pins) To connect MASK PI ASSY(5pins) To connect MOTOR(CHART) ASSY(6pins) J10: To connect MOTOR(MASK) ASSY(6pins) J11: To connect TRANSFORMER(6V/AC 5A RED LINE) J12: To connect LAMP(6V, 30W Halogen)
-
Page 8: Repair Work
3. REPAIR WORK 3-1 Inspection/adjustment procedures 3-1-1 Inspection items ① If the pilot lamp(green) lights when the power is turned on ② If the halogen lamp lights about 10 seconds after the power is turned on ③ If the entire chart is uniformly bright ④…
-
Page 9: Inspection Criteria
3-1-2 Inspection criteria Positional relationship between chart and mask When a vertical line mask is used: No right and left parts of the chart must be visible (when viewed from the correct position). (Chart symbols must virtually align with the center of the mask.) No adjoining parts of the chart must be visible.
-
Page 10
3-2 Disassembly/Reassembly Producedures 3-2-1 NAME OF ILLUSTRATED PARTS NAME OF PART STAND ASS’Y & BODY ASS’Y disassembly and assembly BODY COVER(U) ASS’Y & FRONT COVER ASS’Y disassembly and assembly PCB ASS’Y & POWER SOCKET ASS’Y disassembly and assembly MECHA ASS’Y & BODY COVER(L) ASS’Y disassembly and assembly MECHA ASS’Y disassembly and assembly STAND ASS’Y disassembly and assembly BODY COVER(L) ASS’Y &… -
Page 11
3-2-2 Parts Exchange Exchange Parts Exchange Method Sequence STAND ASS’Y 1. Disassembly & ① To untie 1pcs of SCREW(2) BODY ASS’Y through six angles wrench and Disassembly and assembly disconnect STAND ASS’Y(3) 2. Assembly ① On the contrary to above sentence #1… -
Page 12
Exchange Parts Exchange Method Sequence BODY COVER(U) ASS’Y 1. Disassembly & ② To untie 2pcs of SCREW(2) FRONT COVER ASS’Y through six angles wrench and disconnect BODY COVER-U(1) Disassembly and assembly ③ To untie 2pcs SCREW(5) and 1pcs of SCREW(6) through + driver and disconnect FRONT COVER ASS’Y(4) 2. -
Page 13
Exchange Parts Exchange Method Sequence PCB ASS’Y 1. Disassembly & ① To untie 4pcs of SCREW(2) through POWER SOCKET ASS’Y + driver and disconnect PCB ASS’Y(1) Disassembly and assembly ② To disconnect all connectors on the PCB ASS’Y(1) ③ To untie 4pcs of SCREW(4) through + driver and disconnect POWER SOCKET ASS’Y(3) 2. -
Page 14
Exchange Parts Exchange Method Sequence MECHA ASS’Y 1. Disassembly & ① To untie 4pcs of SCREW(2) through BODY COVER(L) ASS’Y + driver and disconnect MECHA ASS’Y(1) Disassembly and assembly 2. Assembly ① On the contrary to above sentence #1… -
Page 15
Exchange Parts Exchange Method Sequence MECHA ASS’Y 1. Disassembly Disassembly and ① To untie 1pcs of SCREW(1) and 2pcs of SCREW(2) assembly through + driver and disconnect MAIN PLATE ASS’Y(3) ② Remove CHART COVER(4) from CHART BODY(21) ③ To untie 4pcs of SCREW(5) through six angles wrench and disconnect MASK F/L ASS’Y(6) ④… -
Page 17
Exchage Parts Exchange Items Sequence STAND ASS’Y 1. Disassembly Disassembly and assembly ① To untie 3pcs of SCREW(3) through + driver and disconnect STAND HOLD GUIDE(2) ② To untie 4pcs of SCREW(5) through + driver and disconnect FOOT(4) 2. Assembly ①… -
Page 18
Exchange Parts Exchange Method Sequence BODY COVER(L)ASS’Y 1. Disassembly & ① To untie 2pcs of SCREW(3) through + driver BUTTON ASS’Y and disconnect BUTTON ASS’Y(2) Disassembly and assembly * Part No.(1) : BODY COVER(L) ② To untie 2pcs of SCREW(4) through + driver and disconnect BUTTON(5) &… -
Page 19
Exchange Parts Exchange Method Sequence BODY COVER(U) ASS’Y 1. Disassembly Disassembly and assembly ① To untie 2pcs of SCREW(3) through + driver and disconnect LOCK(U)(2) Part No.(1) : BODY COVER(U) 2. Assembly ② On the contrary to above sentence #1… -
Page 20
Exchange Parts Exchange Method Sequence POWER SOCKET ASS’Y 1. Disassembly Disassembly and assembly ① Take out POWER S/W(1) from POWER SOCKET PLATE(1) ② Take out FUSE INLET(3) from POWER SOCKET PLATE(1) ③ To untie 2pcs of POST NUT(5) through HEXAGON BOX driver and disconnect SERIAL DESUB(4) ④… -
Page 21
Exchange Parts Exchange Method Sequence MAIN PLATE ASS’Y 1. Disassembly Disassembly and assembly ① To untie 3pcs of SCREW(3) & WASHER(4) through + driver and disconnect TRANSFORMER(2) ② To untie 3pcs of SCREW(6) through + driver and disconnect CYLINDER SUPPORT(5) Part No.(1) : MAIN PLATE 2. -
Page 22
Exchange Parts Exchange Method Sequence CHART ASS’Y 1. Disassembly & ① To untie 2pcs of SCREW(3) through + driver MOTOR and disconnect CHART SUB ASS’Y(2) Disassembly and assembly Part No.(1) : STEPPING MOTOR ② To untie 2pcs of SCREW(6) through + driver and disconnect SENSOR GUIDE(5) Part No.(4) : CHART ASS’Y 2. -
Page 23
Exchange Parts Exchange Method Sequence MASK ASS’Y 1. Disassembly & ① To untie 2pcs of SCREW(3) through + driver MOTOR and disconnect CHART ASS’Y(2) Disassembly and assembly Part No.(1) : STEPPING MOTOR ② To untie 2pcs of SCREW(6) through + driver and disconnect SENSOR GUIDE(5) Part No.(4) : CHART(4) 2. -
Page 24
3-2-3 CCP-3100 DRAWING… -
Page 25: Part List
3-2-4 PART LIST Exchange Sequence #1> < CODE PARTS NAME REMARK BODY ASS’Y STAND ASS’Y STAND HOLD GUIDE & STAND HOLD SCREW Exchange Sequence #2> < CODE PARTS NAME REMARK E0MASSY004 BODY COVER(U) ASS’Y WRENCH SCREW , M3*25L , BLACK EOMASSY005 FRONT COVER ASS’Y PH SCREW , M3X12L, FZY , WITH WASHER &…
-
Page 26
Exchange Sequence #4> < CODE PART NAME REMARK MECHA ASS’Y PH SCREW ,M4X6L , FZY Exchange Sequence #5> < PARTS NAME REMARK PH SCREW , M3X8L, FZB , WITH WASHER PH SCREW , M3X8L, FZB , WITH WASHER MAIN PLATE ASS’Y 2010A00E001 CHART COVER WRENCH SCREW , M4X10L , BLACK , NYLOCK… -
Page 27
PH SCREW , M3X6L, FZY OPTION EOEHAR3001 HARNESS(PHOTO INTERRUPTER CHART) PH SCREW , M3X6L, FZY EOEHAR3001 HARNESS(PHOTO INTERRUPTER MASK) 1100MP0E003 CHART BODY(20W) Exchange Sequence #6> < PARTS NAME REMARK 1100MS0E001 STAND 1210A00E001 STAND HOLD GUIDE PH SCREW , M3X12L, FZY , WITH WASHER 3000A00E001 FOOT PH SCREW , M3X8L, FZB , WITH WASHER… -
Page 28
Exchange Sequence #8> < PARTS NAME REMARK 2000A00E001 BODY COVER(U) 1020A00E001 LOCK(U) TAPING SCREW , Φ3X7L, FZY Exchange Sequence #9> < PARTS NAME REMARK 1030MP0E004 POWER SOCKET PLATE 7600S0F0010 POWER S/W 7604ACI0002 FUSE INLET(SCHURTER) E0EHAR2001 HARNESS(SERIAL DESUB) POST NUT , M3/5L E0EHAR2000 HARNESS(CAN) WASHER — HARNESS(CAN) -
Page 29
Exchange Sequence #11> < PARTS NAME REMARK 6430TMT2300 STEPPING MOTOR CHSRT SUB ASS’Y SCREW , M4X10L E0MASSY003 CHART ASS’Y 1030MP0E001 SENSOR GUIDE PH SCREW , M2X4L, FZB Exchange Sequence #12> < PARTS NAME REMARK 6430TMT2300 STEPPING MOTOR MASK SUB ASS’Y SCREW , M4X10L E0MASSY010 MASK ASS’Y… -
Page 30: Troubleshooting Procedure
3-3 Troubleshooting Procedure This section deals with potential problems mainly associated with the electric system that can be corrected only by PCB or unit replacement. 1. Abnormalities in Transformer · Pilot lamp does not light. 2. Incorrect initial setting · Chart or mask keeps scrolling. ·…
-
Page 31
3-3-1 Abnormalities in power transformer MAIN BOARD 6VAC 6VAC 18VAC 18VAC WHITE WHITE INLET SWITCH 220V/AC RED 220V/AC FUSE 110V/AC BROWN 110V/AC FUSE 0V/AC TRANSFORMER < Fig E5 > CHECK POINTS Check J1 AC input -> If abnormal: When Inspect the J1, voltage level is 18V/AC(±3V/AC). ->… -
Page 32
3-3-2 Incorrect initial setting Chart or Mask keeps scrolling Halogen lamp does not light Initial setting sequence: Chart zero detection 2. Mask zero detection 3. Halogen lamp lighting CHECK POINTS — In the case of abnormal zero detection(to be checked for by connecting a oscilloscope). At this time, GND should be connected to GND. -
Page 33
3-3-3 Abnormalities in remote control Remote control is inoperable Inspect battery of remote controller. Change the remote controller. And check again If it does not work, change the main PCB 3-3-4 Misalignment Operation is impossible Operating position is incorrect CHECK POINTS — Malfunctions of Main PCB 1.
- Manuals
- Brands
- Huvitz Manuals
- Projector
- CCP-3100
Manuals and User Guides for Huvitz CCP-3100. We have 2 Huvitz CCP-3100 manuals available for free PDF download: Operator’s Manual, Service Manual
Huvitz CCP-3100 Operator’s Manual (33 pages)
Chart Projector
Brand: Huvitz
|
Category: Projector
|
Size: 1.32 MB
Table of Contents
-
Important Notice
3
-
Table of Contents
4
-
1 Introduction
6
-
Outline of Product
6
-
Classifications
6
-
Certification
6
-
-
2 Safety Information
7
-
Introduction
7
-
Safety Symbols
8
-
Environmental Factors
9
-
Safety Precautions
10
-
-
3 Features
12
-
4 Notes for Using the Instrument
13
-
5 Configurations
14
-
Main Body
14
-
Main Body Cont
15
-
Accessories
16
-
-
6 Installation
17
-
Position of Chart Projector
17
-
How to Obtain Correct Letter Size and Focus (Zooming Type Only)
18
-
-
7 Input and Use of Program
19
-
How to Input User’s Program
19
-
How to Use Your Stored Programs
20
-
-
8 Types of Chart (Type C Is Standard)
21
-
9 Maintenance and Repair
22
-
Lamp Replacement
22
-
Fuse Replacement
23
-
The Battery of Remote Controller Replacement
24
-
Cleaning
25
-
Disposal
25
-
-
10 Specifications
26
-
11 Components List
27
-
Standard Accessories
27
-
Optional Accessories
27
-
-
12 Service Information
28
Advertisement
Huvitz CCP-3100 Service Manual (33 pages)
Chart Projector
Brand: Huvitz
|
Category: Projector
|
Size: 1.2 MB
Table of Contents
-
How to Use the Manual
2
-
Product Outline
3
-
Position of Chart Projector
4
-
How to Obtain Correct Letter Size and Focus (Zooming Type Only)
4
-
Basic Principle
6
-
PCB Layout Drawing
7
-
Control Pcb
7
-
Repair Work
8
-
Inspection Items
8
-
Inspection Criteria
9
-
Part List
25
-
Troubleshooting Procedure
30
Advertisement
Related Products
-
Huvitz CCP-7000
-
Huvitz Excelon CAB-4000
-
Huvitz CPE-3000
-
Huvitz CRK-7000
-
Huvitz CDR-9000
-
Huvitz CDC-1
-
Huvitz CLM-9000
-
Huvitz CME-9000
-
Huvitz CLM-3100P
-
Huvitz CRK-1
Huvitz Categories
Medical Equipment
Measuring Instruments
Laboratory Equipment
Microscope
Projector
More Huvitz Manuals
Регистрационное удостоверение на медицинское изделие РЗН 2013/1168
Внимание, документ содержит изменения:
История вносимых изменений
Фактический адрес заявителя
Юридический адрес заявителя
Фактический адрес изготовителя
Юридический адрес изготовителя
118500
Проектор знаков ССР-3100
Проектор знаков ССР-31001. Экран проекционный к CCP-3100.
2. Крепление настенное для CCP-3100.
3. Подставка для CCP-3100.
4. Пульт дистанционного управления для CCP-3100.
5. Батарейки (стартовый набор).
6. Чехол для CCP-3100.
7. Кабель сетевой.
8. Комплект сервисный: предохранители, лампа запасная для CCP-3100.
9. Инструкция по эксплуатации.
Подробнее
Развернуть
Проектор знаков ССР-3100I. Проектор знаков ССР-3100:
1. Экран проекционный к CCP-3100;
2. Крепление настенное для CCP-3100;
3. Подставка для CCP-3100;
4. Пульт дистанционного управления для CCP-3100;
5. Батарейки (стартовый набор);
6. Чехол для CCP-3100;
7. Кабель сетевой;
8. Комплект сервисный: предохранители, лампа запасная для CCP-3100;
9. Инструкция по эксплуатации.
Подробнее
Развернуть
Проектор знаков ССР-3100 (см. Приложение на 1 листе)1.Экран проекционный к ССР-3100
2.Крепление настенное для ССР-3100
3.Подставка для ССР-3100 4.Пульт дистанционного управления для ССР-3100
5.Батарейки (стартовый набор)
6.Чехол для ССР-3100 7.Кабель сетевой
8.Комплект сервисный: предохранители, лампа запасная для ССР-3100
9.Инструкция по эксплуатации
Подробнее
Развернуть
|
Detail Specifications: 754/754462-ccp3100.pdf file (03 Nov 2022) |
Accompanying Data:
Huvitz CCP-3100 Projector PDF Operator’s Manual (Updated: Thursday 3rd of November 2022 11:17:07 PM)
Rating: 4.3 (rated by 68 users)
Compatible devices: S10C, MS619ST, ZU650, PTL711U — LCD PROJECTOR, ImagePro 8778, HCP-7000, CCP-7000, EKTAGRAPHIC AFT.
Recommended Documentation:
Text Version of Operator’s Manual
(Ocr-Read Summary of Contents, UPD: 03 November 2022)
-
3, Huvitz CCP-3100 2 CCP-3100 Operator’s Manual ———————————————————————— IMPORTANT NOTICE This product may malfunction due to electromagnetic waves caused by portable personal telephones, transceivers, radio-controlled toys, etc. Be sure to avoid having objects such as, which affect this product, brought near the product. …
-
23, 22 CCP-3100 Operator’s Manual ———————————————————————— [Fig. 8 Lamp assembly] Install the lamp securely as showen in the Fig.8 Make sure that you install it in the correct direction. 9.2 Fuse Replacement 1. Turn off power, and disconnect the power cord. 2. Pull out the plastic cover at the lower part of power socke…
-
31, 30 CCP-3100 Operator’s Manual ———————————————————————— 4 m
… -
10, ——————————————————————— CCP-3100 Opreator’s Manual 9 Avoid places where the ambient temperature falls below 10℃ or exceeds 40℃ for normal operation, or below -10℃ or exceeds 40℃ (14℉-104℉) for transportation and storage. Humidity should be maintained between 30 and 75% for normal operation, transportation and stora…
-
28, Huvitz CCP-3100 ——————————————————————— CCP-3100 Opreator’s Manual 27 12.Service Information How to contact service: If there are any problems with the equipment, please follow the steps below: First of all, refer to the 9. Maintenance and Repair sections according to the problem that you are encountered. And then f…
-
24, ——————————————————————— CCP-3100 Opreator’s Manual 23 [Fig. 9 Fuse assembly] 9.3 Replacement the Battery of Remote Controller 1. Remove the battery cover of the remote controller. 2. Replace the batteries and the battery cover to the remote controller. NOTE : Be sure to observe the polarity…
-
15, 14 CCP-3100 Operator’s Manual ———————————————————————— 5.2 Main Body cont. [Fig. 2 Bottom View] [Fig. 3 Rear View] 1. Focusing Wheel …
-
20, Huvitz CCP-3100 ——————————————————————— CCP-3100 Opreator’s Manual 19 7.2 How to use your stored programs. Step 1. Press “ PGM 1 ” or “PGM 2” to select the program of your choice. Step 2. Use the “Program ” or “Program ” to scroll through your stored program.
… -
17, 16 CCP-3100 Operator’s Manual ———————————————————————— 6.Installation 6.1 Position of Chart Projector The single tube projector must be installed at the same distance from the screen as the patient. [Fig. 6 Installation without mirrors] 1. Install chart projector at desired position within 2.5~8m (8~26 feet). 2. S…
-
27, 26 CCP-3100 Operator’s Manual ———————————————————————— 11.Components List 11.1 Standard accessories 1. Remote control -1 2. Screen (400X500mm) -1 3. Table stand -1 4. Dust cover -1 5. Power cable –1 For use of equipment in rated voltage less than 125Vac,minimum 6A,Type SJT or SVT…
-
8, Huvitz CCP-3100 ——————————————————————— CCP-3100 Opreator’s Manual 7 2.2 Safety Symbols The International Electrotechnical Commission (IEC) has established a set of symbols for medical electronic equipment, which classify a connection or warn of any potential hazards. The classifications and symbols are shown below. Save…
Recommended Instructions:
CS50, KFHHP-09-OD, 3627436241, WP9440 — RAMSA POWER AMPS
-
3M™ Digital Projector S15 and X15CONNECTIONSCOMPUTER• RGB• Serial Control• PC AudioVIDEO• S-Video• RCA Composite• Audio (Stereo)• Through RGB with special cableS15 Order Number: 78-9236-6844-2X15 Order Number: 78-9236-6847-5BASIC SPECS• 1,500 lumens* • SVGA (800×600)• 4.9 lbs / 2.249 kg• 300:1 Contrast ratio• Whisper mode� …
Multimedia Projector S15 2
-
4-435-798-11 (1)© 2012 Sony CorporationDataProjectorOperating InstructionsBefore operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference.VPL-EW275/EW245/EW225VPL-EX275/EX271/EX245/EX241/EX225/EX221Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. …
VPLEW225 80
-
HP mp2210 digital projector hp An intuitively designed mobile projector with best-in-class image quality.1 No training required. Quick setup and shutdown • Set up and shut down in seconds. Easy to use, this lightweight, highly mobile projector lets you get started and pack up quickly. It is the perfect companion for professionals who demand quick …
mp2210 4
Additional Information:
Popular Right Now:
Operating Impressions, Questions and Answers:
——————————————————————— CCP-3100 Opreator’s Manual 1
Operator’s Manual
Chart Projector
2 CCP-3100 Operator’s Manual ————————————————————————
IMPORTANT NOTICE
This product may malfunction due to electromagnetic waves caused by portable personal telephones, transceivers, radio-controlled toys, etc. Be sure to avoid having objects such as, which affect this product, brought near the product.
The information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. HUVITZ assumes no responsibility, however, for possible errors or omissions, or for any consequences resulting from the use of the information contained herein.
HUVITZ reserves the right to make changes in its products or product specifications at any time and without prior notice, and is not required to update this documentation to reflect such changes.
©2002 — 2004 HUVITZ Co., Ltd.
689-3, Geumjeong-dong, Gunpo-si, Gyeonggi-do,
435-862, Republic of Korea
——————————————————————— CCP-3100 Opreator’s Manual 3
All rights are reserved.
Under copyright laws, this manual may not be copied, in whole or in part, without the prior written consent of HUVITZ Co., Ltd.
Document Number: 9000OMCP001-A, published in 2006/07/20
|
CONTENTS |
||
|
1. Introduction ………………………………………………………………………………………………. |
5 |
|
|
1.1. |
Outline of product …………………………………………………………………………………. |
5 |
|
1.2. |
Classifications ……………………………………………………………………………………… |
5 |
1.3Certification …………………………………………………………………………..5
|
2. Safety Information ……………………………………………………………………………………… |
6 |
|
|
2.1. |
Introduction………………………………………………………………………………………….. |
6 |
|
2.2. |
Safety Symbols…………………………………………………………………………………….. |
7 |
|
2.3. |
Environmental factors ……………………………………………………………………………. |
8 |
|
2.4. |
Safety Precautions ……………………………………………………………………………….. |
9 |
3.Features…………………………………………………………………………………………………..11
|
4. |
Notes for Using the Instrument …………………………………………………………………. |
12 |
|
|
5. |
Configurations…………………………………………………………………………………………. |
13 |
|
|
5.1. |
Main Body …………………………………………………………………………………………. |
13 |
|
|
5.2. |
Main Body cont…………………………………………………………………………………… |
14 |
|
|
5.3. |
Accessories ……………………………………………………………………………………….. |
15 |
6.Installation.. ……………………………………………………………………………………………..16
|
6.1. |
Position of Chart Projector ……………………………………………………………………. |
16 |
|
6.2. |
How to obtain correct Letter Size and focus (Zooming Type only)……………….. |
17 |
|
4 |
CCP-3100 Operator’s Manual ———————————————————————— |
||
|
7. |
Input and Use of Program …………………………………………………………………………. |
18 |
|
|
7.1. |
How to input user’s program …………………………………………………………………. |
18 |
|
|
7.2. |
How to use your stored programs. …………………………………………………………. |
19 |
|
|
8. |
Types of Chart (Type C is Standard)………………………………………………………… |
20 |
|
|
9. |
Maintenance and Repair……………………………………………………………………………. |
21 |
|
|
9.1. |
Lamp Replacement……………………………………………………………………………… |
21 |
|
|
9.2. |
Fuse Replacement………………………………………………………………………………. |
22 |
|
|
9.3 |
The battery of Remote Controller Replacement ……. |
……………………….23 |
9.4Cleaning………………………………………………………………………………24
9.5Disposal ……………………………………………………………………………..24
|
10. |
Specifications ………………………………………………………………………………………….. |
25 |
|
|
11. |
Components List ……………………………………………………………………………………… |
26 |
|
|
11.1. |
Standard accessories ………………………………………………………………………….. |
26 |
|
|
11.2. |
Optional accessories …………………………………………………………………………… |
26 |
|
|
12. |
Service Information ………………………………………………………………………………….. |
27 |
——————————————————————— CCP-3100 Opreator’s Manual 5
1. Introduction
1.1.Outline of product
HUVITZ CCP-3100 is an automatic chart projector which provides 41 different charts including red/green and polarized filters for the eye optometry. Users can select the desired charts instantaneously by cordless remote controller. Charts move quickly and quietly. The customized two programs will help you to perform more convenient and effective examination. You can also execute the binocular balance tests, stereo tests, fixation disparity tests, fusion tests and aniseikonia tests with CCP-3100. This automatic chart project is compatible with HUVITZ digital refractor, CDR-3100. Equipment intended for connection to signal input and signal output, shall with IEC60601-1, or UL60601-1 harmonized national standard or the combination.
If, in doubt, contact qualified technician for helf.
1.2.Classifications
Class I equipment (CCP-3100)
No applied part
Ordinary equipment (IPX 0)
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide
Continuous operation equipment
1.3.Certification
6 CCP-3100 Operator’s Manual ————————————————————————
2.Safety Information
2.1 Introduction
Safety is everyone’s responsibility. The safe use of this equipment is largely dependent upon the installer, user, operator, and maintainer. It is imperative that personnel study and become familiar with this entire manual before attempting to install, use, clean, service or adjust this equipment and any associated accessories. It is paramount that the instructions contained in this manual are fully understood and followed to enhance safety to the patient and the user/operator. It is for this reason that the following safety notices have been placed appropriately within the text of this manual to highlight safety related information or information requiring special emphasis. All users, operators, and maintainers must be familiar with and pay particular attention to all Warnings and Cautions incorporated herein.
!WARNING
“Warning ” indicates the presence of a hazard that could result in severe personal injury, death or substantial property damage if ignored.
NOTE
“Note” describes information for the installation, operation, or maintenance of which is important but hazard related if ignored.
!CAUTION
“Caution” indicates the presence of a hazard that could result in minor injury, or property damaged if ignored.
——————————————————————— CCP-3100 Opreator’s Manual 7
2.2 Safety Symbols
The International Electrotechnical Commission (IEC) has established a set of symbols for medical electronic equipment, which classify a connection or warn of any potential hazards. The classifications and symbols are shown below.
Save these instructions
I and O on the power switch represent ON and OFF respectively.
This symbol identifies a safety note. Ensure you understand the function of this control before using it. Control function is described in the appropriate User’s or Service Manual.
Hot surface.
Identifies the point where the system safety ground is fastened to the chassis. Protective earth connected to conductive parts of Class I equipment for safety purposes.
Disposal of your old appliance
|
1. |
When this crossed-out wheeled bin symbol is attached |
|
to |
a product it means the product is covered by the |
European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
8 CCP-3100 Operator’s Manual ————————————————————————
2.3 Environmental factors
Avoid the following environments for operation or storage:
Where the equipment is exposed to water vapor.
Don’t operate an equipment with a wet hand.
Where the equipment is exposed to direct sunlight.
Where the temperature changes extremely.
Normal operating temperature range is from 10 to 40 , Humidity is from 30% to 75%.
Where it is near the heat equipment.
Where the humidity is extremely high or there is a ventilation problem.
Where the equipment is subject to excessive shocks or vibrations.
Where equipment is exposed to chemical material or explosive gas.
Be careful not to be inserted dust, especially, metal
——————————————————————— CCP-3100 Opreator’s Manual 9
Avoid places where the ambient temperature falls below 10 or exceeds 40 for normal operation, or below -10 or exceeds 40 (14 -104 ) for transportation
and storage. Humidity should be maintained between 30 and 75% for normal operation, transportation and storage and atmospheric pressure (700~1060hpa). Avoid environments where the equipment is exposed to excessive shocks or vibrations.
2.4 Safety Precautions
This equipment has been developed and tested according to national as well as international safety standards. This guarantees a very high degree of safety for this device. The correct handling of this equipment is imperative for its safe operation. Therefore, please read carefully all instructions before switching on this device. For more detailed information, please contact our Customer Service Department or one of our authorized representatives.
1.This equipment must not be used (a) in an area that is in danger of explosions and (b) in the presence of flammable, explosive, or volatile solvents such as alcohol, benzene or similar chemicals.
2.Do not put or use this device in humid rooms. Humidity should be maintained between 30 and 75% for normal operation. Do not expose the device to water splashes, dripping water, or sprayed water. Do not place containers containing fluids, liquids, or gases on top of any electrical equipment or devices.
3.The equipment must be operated only by, or under direct supervision of a properly trained and qualified person.
4.Customer maintenance of this equipment may only be performed as stated in the User’s Manual. Any additional maintenance may only be performed by HUVITZ service technicians or other authorized persons.
Loading…