Руководство по скандику 550

Quick Links

• Page 2: Safety Warning

  In Canada, products are distributed by Bombardier Recreational Products Inc. The following are trademarks of Bombardier Recreational Products Inc. or its sub- sidiaries. ROTAX SKANDIC Ski-Doo ® D.E.S.S. mmo2011-008 en AG ®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

• Page 3: Foreword

  Bombardier Recreational Products jury or death. Inc. (BRP) warranty and a network of authorized Ski-Doo snowmobile deal- ers ready to provide the parts, service CAUTION Indicates a hazard or accessories you may require.

• Page 4
  FOREWORD in this guide may occur. BRP reserves the right at any time to discontinue or change specifications, designs, fea- tures, models or equipment without incurring any obligation upon itself. SAFETY This Operator’s Guide and the should remain with the vehicle when it’s sold.

• Page 5: Table Of Contents

  TABLE OF CONTENTS FOREWORD …………….1 Know Before you Go .

• Page 6
  TABLE OF CONTENTS CONTROLS, INSTRUMENTS AND EQUIPMENT (cont’d) 19) Heated Grip Switch …………37 20) Heated Throttle Lever Switch.
• Page 7
  TABLE OF CONTENTS MAINTENANCE BREAK-IN INSPECTION …………58 MAINTENANCE SCHEDULE .
• Page 8
  CANADA: 2011 SKI-DOO ® SNOWMOBILES …………..98…

• Page 9: Safety Information

  SAFETY INFORMATION ________ ________ SAFETY INFORMATION…

• Page 10: General Precautions

  Avoid Gasoline Fires and See your authorized Ski-Doo dealer for Other Hazards available accessories for your vehicle. Gasoline is extremely flammable and highly explosive. Fuel vapors can…

• Page 11: Special Safety Messages

  SPECIAL SAFETY MESSAGES SEVERE INJURY OR DEATH can result if you do not follow these instructions: – Always make a pre-ride inspection BEFORE you start the engine. – Throttle mechanism should be checked for free movement and return to idle po- sition before starting engine.

• Page 12
  SPECIAL SAFETY MESSAGES – Remember, promotional material may show risky maneuvers performed by professional riders under ideal and/or controlled conditions. You should never attempt any such risky maneuvers if they are beyond your level of riding ability. – Never ride this vehicle under influence of alcohol or drugs. They slow reaction time and impair judgement.
• Page 13
  – You may stud the track on this vehicle model. However, you MUST only use the BRP approved type stud for use on Ski-Doo snowmobiles. DO NOT EVER use conventional studs because the track thickness is thinner then our standard tracks.

• Page 14: Riding The Vehicle

  Replenish if necessary and those whom you allow to ride or drive. see an authorized Ski-Doo dealer in There may be noticeable handling and case of any leaks. performance differences from one 6.

• Page 15: How To Ride

  RIDING THE VEHICLE Pre-Ride Check List ✔ ITEM OPERATION Body including seat, footrests, lights, air filter, controls and Check condition and remove snow or ice. instruments Skis and steering Check for free movement and proper action. Fuel and oil Check for proper level and leaks. Check for proper latching and no heavy or Storage compartment breakable objects.

• Page 16
  RIDING THE VEHICLE – Adjustable wrench – Knife – Flashlight – Colored lens goggles – Trail map. Include other items depending on the length and time of your ride. mmo2008-003-001 Rider Position (Forward Operation) Posting Your riding position and balance are the two basic principles of making your A semi-sitting position with the body snowmobile go where you want it to.

• Page 17: Carrying A Passenger

  RIDING THE VEHICLE Standing Even when passengers are allowed, you must make sure that the persons Place both feet on the running boards. who would like to become passengers Knees should be flexed to absorb the are physically fit for snowmobiling. shock from surface bumps.

• Page 18: Terrain/Riding Variations

  RIDING THE VEHICLE Riding with passengers on board is dif- for the unexpected. Observe all trail ferent than riding alone. The operator signs. Do not zigzag from one side of has the benefit of knowing what will the trail to the other. be the next maneuver and is able to prepare himself accordingly.

• Page 19
  RIDING THE VEHICLE Frozen Water A direct climb could present problems. Choose the standing position, acceler- Traveling frozen lakes and rivers can be ate before you start the climb and then fatal. Avoid waterways. If you are in reduce throttle pressure to prevent an unfamiliar area, ask the local author- track slippage.
• Page 20
  RIDING THE VEHICLE thrown rearward into the path of a fol- to reduce your exposure to hazards. lowing snowmobile. Getting a vehicle Be safe, slow down and enjoy the out of a slush area is strenuous and in scenery. some cases, impossible. Hidden Wires Fog or Whiteouts Always be on the lookout for hidden…
• Page 21
  RIDING THE VEHICLE Do not over-exert yourself. Get assis- you start, make certain your lights tance. Remember to always lift using are clean and work properly. Drive your legs as opposed to your back. at speeds that will allow you to stop in time when you see an unknown or dangerous object ahead.

• Page 22: Environment

  RIDING THE VEHICLE Trail Stops and resources inevitably leads to re- strictions and closures of both private Whenever possible, pull off the trail and public land. when you stop. This will reduce the hazard to other snowmobilers using In essence, the greatest threat to our the trail.

• Page 23
  Remember, whether you’re driving a high perfor- there is a link between protecting your mance Ski-Doo, a sporty MX Z™ snow- environment and your own safety. mobile or any other make or model, show you know what you’re doing.

• Page 24: Important On-Product Labels

  TYPICAL — LOCATION OF VEHICLE SAFETY hicle and they should be considered LABELS permanent parts of the vehicle. If missing or damaged, the decals can be replaced free of charge. See an au- thorized Ski-Doo dealer. LABEL 1 _______ ________ SAFETY INFORMATION…

• Page 25
  IMPORTANT ON-PRODUCT LABELS LABEL 2 LABEL 6 — V800 MODEL mmo2007-002-002 LABEL 3 LABEL 7 LABEL 8 LABEL 4 LABEL 5 ________ ________ SAFETY INFORMATION…
• Page 26
  IMPORTANT ON-PRODUCT LABELS LABEL 9 LABEL 10 _______ ________ SAFETY INFORMATION…

• Page 27: Compliance Labels

  IMPORTANT ON-PRODUCT LABELS LABEL 11 Compliance Labels EPA Compliance Label LABEL 12 mmo2007-009-070 IN ENGINE COMPARTMENT ________ ________ SAFETY INFORMATION…

• Page 28: Technical Information Labels

  IMPORTANT ON-PRODUCT LABELS Technical Information SSCC Label Labels Safety standards for snowmobiles have been adopted by the Snowmo- bile Safety and Certification Commit- tee (SSCC) of which BRP is a proud participating member. Assurance that your snowmobile meets these stan- dards is easily checked by locating the Certification Label on a right vertical portion of the vehicle.

• Page 29: Vehicle Information

  VEHICLE INFORMATION _______________…

• Page 30: Controls, Instruments And Equipment

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTE: Some controls, instruments, or equipment do not apply or are optional on some models. In these cases their reference numbers are deliberately missing in the illustrations. mmo2010-001-001_a TYPICAL 7. Mountain strap 23. Fuses 24. Front grab handles/front bumper 25.

• Page 31: Throttle Lever

  CONTROLS, INSTRUMENTS AND EQUIPMENT mmo2008-001-024_b TYPICAL mmo2011-008-001_a 8. Ignition switch/start button TYPICAL 9. Engine cutout switch 1. Throttle lever 13. Choke lever 2. Brake lever 18. Fuel tank cap 3. Parking brake lever 35. Mechanical fuel level gauge 5. Gear shift lever 6.

• Page 32: Brake Lever

  If oil pilot lamp still glows stop engine and have mmo2007-009-037_a lubrication system inspected TYPICAL — ENGAGE MECHANISM Step 1: Squeeze and maintain brake lever by an authorized Ski-Doo dealer. Step 2: Adjust locking lever 1. Position 1 2. Position 2 3. OFF ______________…

• Page 33: Gear Shift Lever

  This lamp will light up to Handlebar height is adjustable. See an indicate a low battery voltage authorized Ski-Doo dealer. condition. See an authorized Ski-Doo dealer as soon as 7) Mountain Strap possible. Mountain strap provides a grip for driver when side-hilling.

• Page 34: Ignition Switch/Start Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT Ignition Switch/Start If starter does not operate, check start- ing system fuse condition. Refer to Button STARTING SYSTEM AND ELECTRIC POWER OUTLET FUSE Ignition Switch 550F Model Start Button V800 Model To start engine, push START button and hold until engine has started.

• Page 35
  The D.E.S.S. key contains an electronic chip which features a unique perma- nently memorized digital code. Operation Your authorized Ski-Doo dealer has pro- Attach tether cord eyelet to clothing, gramed the D.E.S.S. of your snowmo- then snap cap (D.E.S.S. key) over en- bile to recognize the D.E.S.S.
• Page 36
  We recommend the purchase of ad- MONITORING SYSTEM Refer to ditional keys from your authorized D.E.S.S. malfunction codes informa- Ski-Doo dealer. If you have more than tion. one D.E.S.S. equipped Ski-Doo snow- mobile, each can be programmed by your authorized Ski-Doo dealer to ac- cept the other vehicles keys.

• Page 37: Emergency Engine Stop Switch

  If the switch has been used in an emergency caused by a suspected malfunction, the source of the mal- function should be determined and corrected before restarting engine. See an authorized Ski-Doo dealer for servicing. A06H1KA 1. OFF 2. Position 2 3.

• Page 38: Speedometer

  Ski-Doo dealer. Resetable Hour Meter NOTE: Speedometer, odometer and Records engine running time in hours trip meter will have their units (kilome- and minutes since it has been reset.

• Page 39: Mode Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTICE Multifunction Display Code Do not sit or lean on seat when fuel tank cap is not properly in- If your speedometer shows SCALE in stalled. the multifunction display, it means that the display selector button is stuck in 19) Heated Grip Switch the down position or depressed when the electrical system was activated.

• Page 40: Fuses

  Electric Power Outlet Switch function should be determined (V800 Model) and corrected before restarting. See an authorized Ski-Doo dealer With the engine running, use the tog- for servicing. gle switch mounted on the multifunc- tion switch to supply current to the rear rack power outlet.

• Page 41: Front Grab Handles/Front Bumper

  CONTROLS, INSTRUMENTS AND EQUIPMENT V800 Model mmo2008-001-018_a ENGINE COMPARTMENT — UNDERNEATH CONSOLE 1. Fuse holder mmo2007-001-005_a V800 Model 1. Fuse box 2. Cover tab FUSE DESCRIPTION LOCATION 24) Front Grab Handles/ 30 A Engine Front Bumper 1 A CAPS To be used whenever front of snow- 5 A Instrumentation mobile requires manual lifting.

• Page 42: Storage Compartment

  CONTROLS, INSTRUMENTS AND EQUIPMENT 27) Tool Kit V800 Model A tool kit containing tools for basic NOTICE Do not lift snowmobile off maintenance is supplied with the vehi- the ground using the front bumper. cle under seat. 25) Storage Compartment 28) Hitch The hitch can be used to pull most WARNING…

• Page 43: Backrest

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTICE Take care to store the pas- senger seat properly to avoid any damage. WARNING NEVER use the space left by re- moving the passenger seat to sit a passenger. The passenger could hurt his back or suffer other se- rious injuries due to his seating mmo2008-001-019_a position.

• Page 44: Tachometer

  CONTROLS, INSTRUMENTS AND EQUIPMENT Skandic SWT To remove backrest, remove retaining hardware on both sides. TYPICAL — MULTIPLY THE READING BY 1000 34) Adjustable Mirrors mmo2008-001-020_a Each mirror can be adjusted to suit TYPICAL driver’s preference. 1. Retaining hardware Skandic WT WARNING To remove backrest, remove wing Adjust with vehicle at rest in a safe…

• Page 45: Horn Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT 36) Horn Button European Models Only mmo2010-001-003_a 1. Horn Button Depress to activate horn. _______________…

• Page 46: Fuel And Oil

  FUEL AND OIL Recommended Fuel Fueling Procedure Use regular unleaded gasoline, avail- WARNING able from most service stations or oxy- genated fuel containing a maximum Always stop the engine before re- total of 10% of ethanol or methanol fueling. Fuel is flammable and ex- or both.

• Page 47: Recommended Engine Oil (V800 Model)

  FUEL AND OIL NOTICE Use only 2-stroke engine injection oil If XPS synthetic oil (Win- sold by authorized Ski-Doo dealers. ter grade) is not available, use SAE 0W 40 synthetic-based oil that meets ENGINE TYPE OIL TYPE or exceeds the requirements for API service classification SM, SL or SJ.

• Page 48: Break-In Period

  BREAK-IN PERIOD Operation During Break-In A break-in period of 10 operating hours or 500 km (300 mi) is required for the vehicle. After the break-in period, the vehicle should be inspected by an authorized MAINTE- Can-Am dealer. Refer to NANCE section.

• Page 49: Operating Instructions

  OPERATING INSTRUCTIONS Engine Starting Procedure NOTE: For an initial cold start, do not release parking brake. Perform the (550F Model) VEHICLE WARM-UP procedure as ex- plained below. Procedure 1. Apply parking brake. Choke Application (550F Model) 2. Recheck throttle control lever oper- Initial Cold Starting When ation.

• Page 50: Emergency Starting (550F Model Only)

  OPERATING INSTRUCTIONS Emergency Starting Attach the other end of emergency rope to the starter clip supplied in the (550F Model Only) tool kit. The engine can be started with the emergency starter rope supplied with the tool kit. Remove belt guard. WARNING Do not wind starting rope around your hand.

• Page 51: Engine Starting Procedure (V800 Model)

  (2000 ft), your snowmobile should drive pulley, do not reinstall the be modified. Refer to an authorized belt guard and return slowly to Ski-Doo dealer. have snowmobile repaired. NOTICE Do not change original Engine Starting Procedure…

• Page 52: Shutting Off The Engine

  OPERATING INSTRUCTIONS Gearbox Operation 4. Apply throttle until drive pulley en- gages. Drive at low speed the first Refer to shift pattern decal on the vehi- two or three minutes. cle. NOTICE If vehicle does not move NOTICE when throttle is applied, stop en- –…

• Page 53: Towing An Accessory

  OPERATING INSTRUCTIONS 2. Apply and hold brake. Remove the drive belt, attach the rope to the ski legs (spindles), have some- 3. With engine at idle speed, select one sit on the towed snowmobile to ac- low (1) or high (2) gear using the tivate the brake, and tow at low speed.

• Page 54: Tune Your Ride

  TUNE YOUR RIDE Snowmobile handling and comfort de- The best way to set up the suspen- pends on suspension adjustments. sion is to customize each adjustment one at a time. Various adjustments are interrelated. It may be necessary to WARNING readjust center spring after adjusting Suspension adjustment could af- front springs for instance.

• Page 55: Rear Springs Preload

  TUNE YOUR RIDE NOTICE Slight suspension bottoming occurring increase spring under the worst riding conditions indi- preload, always turn the left side cates a good choice of spring preload. adjustment cam in a clockwise di- rection, and the right side cam in a counterclockwise direction.

• Page 56: Shackle Movement Limiter Adjustment

  TUNE YOUR RIDE Stopper strap length also has an effect on center spring travel. NOTICE Whenever stopper strap length is changed, track tension must be checked. ACTION RESULT Lighter ski pressure under acceleration Increasing mmo2008-001-007_a stopper More center spring travel TYPICAL strap length 1.

• Page 57: Adjustment Tips According To Vehicle Behavior

  TUNE YOUR RIDE Adjustment Tips According to Vehicle Behavior PROBLEM CORRECTIVE MEASURES Check ski alignment Front suspension darting – Reduce rear spring preload. Steering feels too heavy during – Reduce rear spring preload. acceleration – Lengthen limiter strap. Too much ski lift during cornering –…

• Page 58: Vehicle Transportation

  VEHICLE TRANSPORTATION Make sure that oil reservoir and fuel tank caps are properly installed. Tilt bed trailers can easily be equipped with a winch mechanism to afford ma- ximum safety in loading. Simple as it may seem, never drive your snowmo- bile onto a tilt bed trailer or any other kind of trailer or vehicle.

• Page 59
  MAINTENANCE _______________…

• Page 60: Break-In Inspection

  BREAK-IN INSPECTION We suggest that after the first 10 hours or 500 km (300 mi) of operation, whichever comes first, your vehicle be inspected by an authorized Ski-Doo dealer. The break-in inspection is very important and must not be neglected.

• Page 61
  BREAK-IN INSPECTION REPLACE ADJUST TIGHTEN BREAK-IN INSPECTION CHART LUBRICATE CLEAN INSPECT DRIVE SYSTEM Drive belt Drive pulley Drive pulley retaining screw tightening screw Driven pulley condition and preload Drive axle end bearing Track Drive chain Gearbox or chaincase oil BRAKE SYSTEM Brake fluid Brake hose, pads and disk STEERING…

• Page 62: Maintenance Schedule

  MAINTENANCE SCHEDULE Maintenance is very important for keeping your vehicle in safe operating condition. Proper maintenance is the owner’s responsibility. The vehicle should be serviced as per maintenance schedule. The maintenance schedule does not exempt the pre-ride inspection. WARNING Failure to properly maintain the vehicle according to the maintenance schedule and procedures can make it unsafe to operate.

• Page 63: Model

  Fuel filter (2) Add to fuel prior to engine lubrication. Fuel lines and connections (3) Fuel filter must be replaced. Carburetor venturi by an authorized Ski-Doo dealer. Throttle cable Air filter DRIVE SYSTEM Drive belt (4) Adjust drive belt height at every belt replacement..

• Page 64
  INSPECT LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND BRAKE SYSTEM Brake fluid — Brake hose, pads and disk…

• Page 65: V800 Model

  MONTHLY OR EVERY 800 km (500 mi) INSPECT LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND ENGINE Engine motor mounts Engine seals Exhaust system Engine lubrication —…

• Page 66
  LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND DRIVE SYSTEM (2) Adjust drive belt height at every Drive belt belt replacement.
• Page 67
  LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND ELECTRICAL SYSTEM (8) Before installing new spark plugs EMS fault codes…

• Page 68: Maintenance Procedures

  If not, see your authorized Ski-Doo dealer. Other important items in the mainte- nance schedule that are more difficult and require special tools are best per- formed by your authorized Ski-Doo dealer. mmr2007-166-010_a WARNING TYPICAL 1. Air filter installed in air inlet duct…

• Page 69: Engine Coolant (V800 Model)

  Oil is highly than the mark. flammable when heated. If additional coolant is necessary or if entire system has to be refilled, refer to an authorized Ski-Doo dealer. TYPICAL mmo2007-001-002_a 1. Injection oil reservoir EXPANSION RESERVOIR NEAR MUFFLER 2.

• Page 70: Engine Oil (V800 Model)

  MAINTENANCE PROCEDURES Engine Oil (V800 Model) Engine Oil Level NOTICE Check level frequently and refill if necessary. Do not over- fill. Operating the engine with an improper level may severely dam- age engine. Wipe off any spillage. mmo2007-001-003_a 1. Maximum 2.

• Page 71: Exhaust System

  MAINTENANCE PROCEDURES Exhaust System NOTICE Severe engine damage can occur if grime particles enter the combustion chamber. Exhaust System Verification The tail pipe of the muffler should be 5. Remove spark plug. centered with the exit hole in the bot- tom pan.

• Page 72: Brake System

  Periodically verify the condition/ wear of the brake pads. Brake Adjustment No adjustment is provided for hydraulic brake. See an authorized Ski-Doo TYPICAL dealer if any problems. 1. Full level mark 2. Lower level mark…

• Page 73: Drive Belt

  Open engine riod, burred or rusty sheave, oil on belt compartment. or distorted spare belt. Contact an au- thorized Ski-Doo dealer. 2. Loosen collar screw on air silencer grommet. Drive Belt Removal 3. Disconnect engine vent hose from air silencer.

• Page 74
  NOTE: If correct adjustment unattainable, contact an authorized Ski-Doo dealer. The drive belt cord should be flush with mmo2008-001-011_a driven pulley edge. Adjust as required. TYPICAL Step 1: Slip the belt over the top edge of the…

• Page 75: Drive Pulley

  MAINTENANCE PROCEDURES Adjust drive belt height using Allen NOTE: Use precision digital tachome- screws. Loosen jam nuts then turns ter for engine RPM adjustment. Allen screws. NOTE: The adjustment has an effect – To lower belt in driven pulley: turn on high RPM only.

• Page 76: Track

  Ski-Doo high rotational speed. See your dealer. Ski-Doo dealer for maintenance or service of the drive pulley.

• Page 77
  MAINTENANCE PROCEDURES 6. Place upper O-ring to 0 kgf (0 lbf). WARNING 7. Position the tensiometer on track, To prevent serious injury to indi- halfway between front and rear idler viduals near the snowmobile: wheels. – NEVER stand behind or near a 8.
• Page 78
  2. Remove rear wheel caps (if so equipped). mmr2008-048-009_a 1. RH adjustment screw 5. If correct tension is unattainable, contact authorized Ski-Doo dealer. 6. Retighten retaining bolts 48 N•m ± 6 N•m (35 lbf•ft ± 4 lbf•ft). 7. Check track alignment as described mmr2008-048-007_a below.
• Page 79
  MAINTENANCE PROCEDURES Track Alignment WARNING Remove the tether cord cap WARNING from engine cutout switch Before checking track alignment, before performing any main- ensure that the track is free of all tenance or adjustment, un- particles which could be thrown less otherwise specified.

• Page 80: Front Suspension

  Visually inspect steering for tightness of components (steering arms, tie Front Suspension rods, ski bolts, ski legs, etc.). If nec- essary, contact an authorized Ski-Doo Front Suspension Lubrication dealer. Lubricate at grease fittings using SUS- PENSION GREASE (P/N 293 550 033).

• Page 81: Vehicle Care

  VEHICLE CARE Post-Operation Care Inspect the hood and repair any dam- age. Shut off the engine. Install rear of ve- hicle on a wide-base snowmobile me- Touch up all metal spots where paint chanical stand. has been scratched off. Spray all metal parts including ski legs using XPS Remove snow and ice from rear sus- LUBE (P/N 293 600 016).

• Page 82: Storage And Preseason Preparation

  Lift rear of vehicle until track is clear of the ground. Install on a wide-base snowmobile mechanical stand with a Preseason Preparation rear deflector panel. Refer to an authorized Ski-Doo dealer. NOTICE Have carburetor(s) CAUTION Use appropriate lift- cleaned-up before restarting engine ing device or have assistance to on so equipped models.

• Page 83: Technical Information

  TECHNICAL INFORMATION _______________…

• Page 84: Vehicle Identification

  550F ENGINE 1. Engine identification number in the event of loss. These numbers are required by the authorized Ski-Doo dealer to complete warranty claims properly. No warranty will be allowed by BRP if the engine serial number or vehicle identification number (V.I.N.)

• Page 85
  VEHICLE IDENTIFICATION mmo2007-001-001_a V800 ENGINE 1. Engine identification number _______________…

• Page 86: Epa Certified Engines

  For more detailed informa- When performing service on a certi- tion on this subject, you may contact fied Ski-Doo snowmobiles that carry the following locations: an emissions control information label, adjustments must be kept within pub- MAIL: lished factory specifications.

• Page 87: Specifications

  SPECIFICATIONS SKANDIC WT MODEL 550F ENGINE Engine type Number of cylinder Bore 76 mm (2.992 in) Stroke 61 mm (2.402 in) Displacement 553.4 cm³ (33.771 in³) Maximum horsepower RPM 6900 ± 100 RPM AXIAL FAN Deflection 9.5 mm ± 1.5 mm (.37 in ± .06 in) Axial fan belt adjustment Force 5 kgf (11 lbf)

• Page 88
  SPECIFICATIONS SKANDIC WT MODEL 550F DRIVE SYSTEM XPS synthetic chaincase oil SYNTHETIC CHAINCASE OIL Type Gearbox oil (P/N 413 803 300) Quantity 500 ml (16.9 U.S. oz) Drive pulley type TRA III Drive pulley calibration Clutch engagement 2500 ± 100 RPM Driven pulley type NDT 6-K VSA Width…
• Page 89
  Measure gap between slider shoe and bottom inside of track when exerting a downward pull to the track. Equal distance between edges of track guides and slider shoes. Drive belt height must be adjusted every time a new drive belt is installed. Confirm drive belt part number application with an authorized Ski-Doo dealer. _______________…
• Page 90
  SPECIFICATIONS SKANDIC SWT MODEL V800 ENGINE ROTAX V810 Engine type 4-stroke, Single Over Head Camshaft (SOHC), liquid cooled Number of cylinders Number of valves 8 valves (mechanical adjustment) Bore 91 mm (3.58 in) Stroke 61.5 mm (2.42 in) Displacement 800 cm³ (48.82 in³) Maximum horsepower RPM ±…
• Page 91
  SPECIFICATIONS SKANDIC SWT MODEL V800 ELECTRICAL SYSTEM Magneto generator output 460 Watt @ 6000 RPM CDI (Capacity Discharge Ignition) Ignition type by DENSO Make and type NGK DCPR8E Spark plug 0.7 mm to 0.8 mm (.028 in to .031 in) Battery 12 V, 21 A•h Headlamp…
• Page 92
  Measure gap between slider shoe and bottom inside of track when exerting a downward pull to the track. Equal distance between edges of track guides and slider shoes. Drive belt height must be adjusted every time a new drive belt is installed. Confirm drive belt part number application with an authorized Ski-Doo dealer. ______________…

• Page 93: Troubleshooting

  TROUBLESHOOTING _______________…

• Page 94: Troubleshooting Guidelines

  1. Engine is too hot, shut off the engine. – Check for clogged air duct passages. Remove any foreign materials. Check for proper fan belt condition and tension. See an authorized Ski-Doo dealer. ENGINE OVERHEATING (liquid cooled) 1. Engine overheating pilot lamp will light up if engine is too hot.

• Page 95
  (each piston on multi-cylinder engines). If no pulsating resistance is felt, it suggests a major loss of compression. Contact an authorized Ski-Doo dealer. ENGINE LACKS ACCELERATION OR POWER 1. D.E.S.S. did not read tether cord cap (D.E.S.S. key) code. D.E.S.S. pilot lamp blinks once every 1.5 seconds.
• Page 96
  – Clean/verify spark plug gap and identification number. Replace as required. 4. Too much oil supplied to engine (2-stroke). – Improper oil pump adjustment, refer to an authorized Ski-Doo dealer. 5. Water in fuel. – Drain fuel system and refill with fresh fuel.

• Page 97: Engine Management System Faults (V800)

  TROUBLESHOOTING GUIDELINES SNOWMOBILE CANNOT REACH FULL SPEED (cont’d) 5. Pulleys misaligned. – Contact an authorized Ski-Doo dealer. 6. Engine. – See items 1, 2, 6 and 7 of ENGINE LACKS ACCELERATION OR POWER. Engine Management System Faults (V800) ENGINE MANAGEMENT SYSTEM PILOT LAMP BLINKS 1.

• Page 98
  TROUBLESHOOTING GUIDELINES ______________…

• Page 99: Warranty

  WARRANTY _______________…

• Page 100: Brp Limited Warranty Usa And Canada: 2011 Ski-Doo

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP dealer at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile.

• Page 101
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2011 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP dealer authorized to distribute Ski-Doo snowmobiles in the country in which the sale occurred (“BRP dealer”);…
• Page 102
  – The 2011 Ski-Doo snowmobile must be purchased in the country in which the purchaser resides; and – Routine maintenance outlined in the Operator’s Guide must be timely per- formed in order to maintain warranty coverage. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
• Page 103
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We recom- mend discussing the issue with the authorized dealer’s service manager or owner. If the issue has not yet been resolved, please submit your complaint in writing or call the appropriate number below: In Canada…

• Page 104: Brp International Limited Warranty: 2011 Ski-Doo

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP distributor/dealer at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile. 2) LIMITATIONS OF LIABILITY…

• Page 105
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2010 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP distributor/dealer authorized to distribute Ski-Doo snow- mobiles in the country in which the sale occurred (“BRP distributor/dealer”);…
• Page 106
  – The 2011 Ski-Doo snowmobile must be purchased in the country or union of countries in which the purchaser resides. – Routine maintenance outlined in the Operator’s Guide must be timely per- formed in order to maintain warranty coverage. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
• Page 107
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We rec- ommend discussing the issue with the authorized distributor/dealer’s service manager or owner.

• Page 108: Brp Limited Warranty For The European Economic Area: 2011 Ski-Doo Snowmobiles

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP distributor/dealer (at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile.

• Page 109
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2011 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP distributor/dealer authorized to distribute Ski-Doo products in the country in which the sale occurred (“BRP distributor/dealer”);…
• Page 110
  BRP’s obligations under this warranty are limited to, at its sole discretion, repairing parts found defective under normal use, maintenance and service, or replacing such parts with new genuine Ski-Doo parts without charge for parts and labour, at any authorized BRP distributor/dealer during the warranty coverage period under the conditions described herein.
• Page 111
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We rec- ommend discussing the issue with the authorized distributor/dealer’s service manager or owner.
• Page 112
  This page is intentionally blank ______________…

• Page 113: Customer Information

  CUSTOMER INFORMATION ______________…

• Page 114: Privacy Information

  PRIVACY INFORMATION BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes. Furthermore, BRP and its affiliates may use its customer list to distribute marketing and promotional information about BRP and related products.

• Page 115: Change Of Address/Ownership

  If your address has changed or if you are the new owner of the vehicle, be sure to notify BRP by either: – Mailing one of the following card below; – North America Only: calling at 715 848-4957 (USA) or 819 566-3366 (Canada); – Notifying an authorized Ski-Doo dealer. In Canada In USA BOMBARDIER RECREATIONAL PRODUCTS INC.

• Page 116
  CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________…
• Page 117
  It is the owner’s responsibility to notify BRP. STOLEN UNITS: If your personal vehicle is stolen, you should notify BRP or an authorized Ski-Doo dealer. We will ask you to provide your name, address, phone number, the vehicle identification number and the date it was stolen.
• Page 118
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 119
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 120
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 121
  NOTES…
• Page 122
  NOTES…

Quick Links

• Page 2: Safety Warning

  In Canada, products are distributed by Bombardier Recreational Products Inc. The following are trademarks of Bombardier Recreational Products Inc. or its sub- sidiaries. ROTAX SKANDIC Ski-Doo ® D.E.S.S. mmo2011-008 en AG ®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

• Page 3: Foreword

  Bombardier Recreational Products jury or death. Inc. (BRP) warranty and a network of authorized Ski-Doo snowmobile deal- ers ready to provide the parts, service CAUTION Indicates a hazard or accessories you may require.

• Page 4
  FOREWORD in this guide may occur. BRP reserves the right at any time to discontinue or change specifications, designs, fea- tures, models or equipment without incurring any obligation upon itself. SAFETY This Operator’s Guide and the should remain with the vehicle when it’s sold.

• Page 5: Table Of Contents

  TABLE OF CONTENTS FOREWORD …………….1 Know Before you Go .

• Page 6
  TABLE OF CONTENTS CONTROLS, INSTRUMENTS AND EQUIPMENT (cont’d) 19) Heated Grip Switch …………37 20) Heated Throttle Lever Switch.
• Page 7
  TABLE OF CONTENTS MAINTENANCE BREAK-IN INSPECTION …………58 MAINTENANCE SCHEDULE .
• Page 8
  CANADA: 2011 SKI-DOO ® SNOWMOBILES …………..98…

• Page 9: Safety Information

  SAFETY INFORMATION ________ ________ SAFETY INFORMATION…

• Page 10: General Precautions

  Avoid Gasoline Fires and See your authorized Ski-Doo dealer for Other Hazards available accessories for your vehicle. Gasoline is extremely flammable and highly explosive. Fuel vapors can…

• Page 11: Special Safety Messages

  SPECIAL SAFETY MESSAGES SEVERE INJURY OR DEATH can result if you do not follow these instructions: – Always make a pre-ride inspection BEFORE you start the engine. – Throttle mechanism should be checked for free movement and return to idle po- sition before starting engine.

• Page 12
  SPECIAL SAFETY MESSAGES – Remember, promotional material may show risky maneuvers performed by professional riders under ideal and/or controlled conditions. You should never attempt any such risky maneuvers if they are beyond your level of riding ability. – Never ride this vehicle under influence of alcohol or drugs. They slow reaction time and impair judgement.
• Page 13
  – You may stud the track on this vehicle model. However, you MUST only use the BRP approved type stud for use on Ski-Doo snowmobiles. DO NOT EVER use conventional studs because the track thickness is thinner then our standard tracks.

• Page 14: Riding The Vehicle

  Replenish if necessary and those whom you allow to ride or drive. see an authorized Ski-Doo dealer in There may be noticeable handling and case of any leaks. performance differences from one 6.

• Page 15: How To Ride

  RIDING THE VEHICLE Pre-Ride Check List ✔ ITEM OPERATION Body including seat, footrests, lights, air filter, controls and Check condition and remove snow or ice. instruments Skis and steering Check for free movement and proper action. Fuel and oil Check for proper level and leaks. Check for proper latching and no heavy or Storage compartment breakable objects.

• Page 16
  RIDING THE VEHICLE – Adjustable wrench – Knife – Flashlight – Colored lens goggles – Trail map. Include other items depending on the length and time of your ride. mmo2008-003-001 Rider Position (Forward Operation) Posting Your riding position and balance are the two basic principles of making your A semi-sitting position with the body snowmobile go where you want it to.

• Page 17: Carrying A Passenger

  RIDING THE VEHICLE Standing Even when passengers are allowed, you must make sure that the persons Place both feet on the running boards. who would like to become passengers Knees should be flexed to absorb the are physically fit for snowmobiling. shock from surface bumps.

• Page 18: Terrain/Riding Variations

  RIDING THE VEHICLE Riding with passengers on board is dif- for the unexpected. Observe all trail ferent than riding alone. The operator signs. Do not zigzag from one side of has the benefit of knowing what will the trail to the other. be the next maneuver and is able to prepare himself accordingly.

• Page 19
  RIDING THE VEHICLE Frozen Water A direct climb could present problems. Choose the standing position, acceler- Traveling frozen lakes and rivers can be ate before you start the climb and then fatal. Avoid waterways. If you are in reduce throttle pressure to prevent an unfamiliar area, ask the local author- track slippage.
• Page 20
  RIDING THE VEHICLE thrown rearward into the path of a fol- to reduce your exposure to hazards. lowing snowmobile. Getting a vehicle Be safe, slow down and enjoy the out of a slush area is strenuous and in scenery. some cases, impossible. Hidden Wires Fog or Whiteouts Always be on the lookout for hidden…
• Page 21
  RIDING THE VEHICLE Do not over-exert yourself. Get assis- you start, make certain your lights tance. Remember to always lift using are clean and work properly. Drive your legs as opposed to your back. at speeds that will allow you to stop in time when you see an unknown or dangerous object ahead.

• Page 22: Environment

  RIDING THE VEHICLE Trail Stops and resources inevitably leads to re- strictions and closures of both private Whenever possible, pull off the trail and public land. when you stop. This will reduce the hazard to other snowmobilers using In essence, the greatest threat to our the trail.

• Page 23
  Remember, whether you’re driving a high perfor- there is a link between protecting your mance Ski-Doo, a sporty MX Z™ snow- environment and your own safety. mobile or any other make or model, show you know what you’re doing.

• Page 24: Important On-Product Labels

  TYPICAL — LOCATION OF VEHICLE SAFETY hicle and they should be considered LABELS permanent parts of the vehicle. If missing or damaged, the decals can be replaced free of charge. See an au- thorized Ski-Doo dealer. LABEL 1 _______ ________ SAFETY INFORMATION…

• Page 25
  IMPORTANT ON-PRODUCT LABELS LABEL 2 LABEL 6 — V800 MODEL mmo2007-002-002 LABEL 3 LABEL 7 LABEL 8 LABEL 4 LABEL 5 ________ ________ SAFETY INFORMATION…
• Page 26
  IMPORTANT ON-PRODUCT LABELS LABEL 9 LABEL 10 _______ ________ SAFETY INFORMATION…

• Page 27: Compliance Labels

  IMPORTANT ON-PRODUCT LABELS LABEL 11 Compliance Labels EPA Compliance Label LABEL 12 mmo2007-009-070 IN ENGINE COMPARTMENT ________ ________ SAFETY INFORMATION…

• Page 28: Technical Information Labels

  IMPORTANT ON-PRODUCT LABELS Technical Information SSCC Label Labels Safety standards for snowmobiles have been adopted by the Snowmo- bile Safety and Certification Commit- tee (SSCC) of which BRP is a proud participating member. Assurance that your snowmobile meets these stan- dards is easily checked by locating the Certification Label on a right vertical portion of the vehicle.

• Page 29: Vehicle Information

  VEHICLE INFORMATION _______________…

• Page 30: Controls, Instruments And Equipment

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTE: Some controls, instruments, or equipment do not apply or are optional on some models. In these cases their reference numbers are deliberately missing in the illustrations. mmo2010-001-001_a TYPICAL 7. Mountain strap 23. Fuses 24. Front grab handles/front bumper 25.

• Page 31: Throttle Lever

  CONTROLS, INSTRUMENTS AND EQUIPMENT mmo2008-001-024_b TYPICAL mmo2011-008-001_a 8. Ignition switch/start button TYPICAL 9. Engine cutout switch 1. Throttle lever 13. Choke lever 2. Brake lever 18. Fuel tank cap 3. Parking brake lever 35. Mechanical fuel level gauge 5. Gear shift lever 6.

• Page 32: Brake Lever

  If oil pilot lamp still glows stop engine and have mmo2007-009-037_a lubrication system inspected TYPICAL — ENGAGE MECHANISM Step 1: Squeeze and maintain brake lever by an authorized Ski-Doo dealer. Step 2: Adjust locking lever 1. Position 1 2. Position 2 3. OFF ______________…

• Page 33: Gear Shift Lever

  This lamp will light up to Handlebar height is adjustable. See an indicate a low battery voltage authorized Ski-Doo dealer. condition. See an authorized Ski-Doo dealer as soon as 7) Mountain Strap possible. Mountain strap provides a grip for driver when side-hilling.

• Page 34: Ignition Switch/Start Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT Ignition Switch/Start If starter does not operate, check start- ing system fuse condition. Refer to Button STARTING SYSTEM AND ELECTRIC POWER OUTLET FUSE Ignition Switch 550F Model Start Button V800 Model To start engine, push START button and hold until engine has started.

• Page 35
  The D.E.S.S. key contains an electronic chip which features a unique perma- nently memorized digital code. Operation Your authorized Ski-Doo dealer has pro- Attach tether cord eyelet to clothing, gramed the D.E.S.S. of your snowmo- then snap cap (D.E.S.S. key) over en- bile to recognize the D.E.S.S.
• Page 36
  We recommend the purchase of ad- MONITORING SYSTEM Refer to ditional keys from your authorized D.E.S.S. malfunction codes informa- Ski-Doo dealer. If you have more than tion. one D.E.S.S. equipped Ski-Doo snow- mobile, each can be programmed by your authorized Ski-Doo dealer to ac- cept the other vehicles keys.

• Page 37: Emergency Engine Stop Switch

  If the switch has been used in an emergency caused by a suspected malfunction, the source of the mal- function should be determined and corrected before restarting engine. See an authorized Ski-Doo dealer for servicing. A06H1KA 1. OFF 2. Position 2 3.

• Page 38: Speedometer

  Ski-Doo dealer. Resetable Hour Meter NOTE: Speedometer, odometer and Records engine running time in hours trip meter will have their units (kilome- and minutes since it has been reset.

• Page 39: Mode Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTICE Multifunction Display Code Do not sit or lean on seat when fuel tank cap is not properly in- If your speedometer shows SCALE in stalled. the multifunction display, it means that the display selector button is stuck in 19) Heated Grip Switch the down position or depressed when the electrical system was activated.

• Page 40: Fuses

  Electric Power Outlet Switch function should be determined (V800 Model) and corrected before restarting. See an authorized Ski-Doo dealer With the engine running, use the tog- for servicing. gle switch mounted on the multifunc- tion switch to supply current to the rear rack power outlet.

• Page 41: Front Grab Handles/Front Bumper

  CONTROLS, INSTRUMENTS AND EQUIPMENT V800 Model mmo2008-001-018_a ENGINE COMPARTMENT — UNDERNEATH CONSOLE 1. Fuse holder mmo2007-001-005_a V800 Model 1. Fuse box 2. Cover tab FUSE DESCRIPTION LOCATION 24) Front Grab Handles/ 30 A Engine Front Bumper 1 A CAPS To be used whenever front of snow- 5 A Instrumentation mobile requires manual lifting.

• Page 42: Storage Compartment

  CONTROLS, INSTRUMENTS AND EQUIPMENT 27) Tool Kit V800 Model A tool kit containing tools for basic NOTICE Do not lift snowmobile off maintenance is supplied with the vehi- the ground using the front bumper. cle under seat. 25) Storage Compartment 28) Hitch The hitch can be used to pull most WARNING…

• Page 43: Backrest

  CONTROLS, INSTRUMENTS AND EQUIPMENT NOTICE Take care to store the pas- senger seat properly to avoid any damage. WARNING NEVER use the space left by re- moving the passenger seat to sit a passenger. The passenger could hurt his back or suffer other se- rious injuries due to his seating mmo2008-001-019_a position.

• Page 44: Tachometer

  CONTROLS, INSTRUMENTS AND EQUIPMENT Skandic SWT To remove backrest, remove retaining hardware on both sides. TYPICAL — MULTIPLY THE READING BY 1000 34) Adjustable Mirrors mmo2008-001-020_a Each mirror can be adjusted to suit TYPICAL driver’s preference. 1. Retaining hardware Skandic WT WARNING To remove backrest, remove wing Adjust with vehicle at rest in a safe…

• Page 45: Horn Button

  CONTROLS, INSTRUMENTS AND EQUIPMENT 36) Horn Button European Models Only mmo2010-001-003_a 1. Horn Button Depress to activate horn. _______________…

• Page 46: Fuel And Oil

  FUEL AND OIL Recommended Fuel Fueling Procedure Use regular unleaded gasoline, avail- WARNING able from most service stations or oxy- genated fuel containing a maximum Always stop the engine before re- total of 10% of ethanol or methanol fueling. Fuel is flammable and ex- or both.

• Page 47: Recommended Engine Oil (V800 Model)

  FUEL AND OIL NOTICE Use only 2-stroke engine injection oil If XPS synthetic oil (Win- sold by authorized Ski-Doo dealers. ter grade) is not available, use SAE 0W 40 synthetic-based oil that meets ENGINE TYPE OIL TYPE or exceeds the requirements for API service classification SM, SL or SJ.

• Page 48: Break-In Period

  BREAK-IN PERIOD Operation During Break-In A break-in period of 10 operating hours or 500 km (300 mi) is required for the vehicle. After the break-in period, the vehicle should be inspected by an authorized MAINTE- Can-Am dealer. Refer to NANCE section.

• Page 49: Operating Instructions

  OPERATING INSTRUCTIONS Engine Starting Procedure NOTE: For an initial cold start, do not release parking brake. Perform the (550F Model) VEHICLE WARM-UP procedure as ex- plained below. Procedure 1. Apply parking brake. Choke Application (550F Model) 2. Recheck throttle control lever oper- Initial Cold Starting When ation.

• Page 50: Emergency Starting (550F Model Only)

  OPERATING INSTRUCTIONS Emergency Starting Attach the other end of emergency rope to the starter clip supplied in the (550F Model Only) tool kit. The engine can be started with the emergency starter rope supplied with the tool kit. Remove belt guard. WARNING Do not wind starting rope around your hand.

• Page 51: Engine Starting Procedure (V800 Model)

  (2000 ft), your snowmobile should drive pulley, do not reinstall the be modified. Refer to an authorized belt guard and return slowly to Ski-Doo dealer. have snowmobile repaired. NOTICE Do not change original Engine Starting Procedure…

• Page 52: Shutting Off The Engine

  OPERATING INSTRUCTIONS Gearbox Operation 4. Apply throttle until drive pulley en- gages. Drive at low speed the first Refer to shift pattern decal on the vehi- two or three minutes. cle. NOTICE If vehicle does not move NOTICE when throttle is applied, stop en- –…

• Page 53: Towing An Accessory

  OPERATING INSTRUCTIONS 2. Apply and hold brake. Remove the drive belt, attach the rope to the ski legs (spindles), have some- 3. With engine at idle speed, select one sit on the towed snowmobile to ac- low (1) or high (2) gear using the tivate the brake, and tow at low speed.

• Page 54: Tune Your Ride

  TUNE YOUR RIDE Snowmobile handling and comfort de- The best way to set up the suspen- pends on suspension adjustments. sion is to customize each adjustment one at a time. Various adjustments are interrelated. It may be necessary to WARNING readjust center spring after adjusting Suspension adjustment could af- front springs for instance.

• Page 55: Rear Springs Preload

  TUNE YOUR RIDE NOTICE Slight suspension bottoming occurring increase spring under the worst riding conditions indi- preload, always turn the left side cates a good choice of spring preload. adjustment cam in a clockwise di- rection, and the right side cam in a counterclockwise direction.

• Page 56: Shackle Movement Limiter Adjustment

  TUNE YOUR RIDE Stopper strap length also has an effect on center spring travel. NOTICE Whenever stopper strap length is changed, track tension must be checked. ACTION RESULT Lighter ski pressure under acceleration Increasing mmo2008-001-007_a stopper More center spring travel TYPICAL strap length 1.

• Page 57: Adjustment Tips According To Vehicle Behavior

  TUNE YOUR RIDE Adjustment Tips According to Vehicle Behavior PROBLEM CORRECTIVE MEASURES Check ski alignment Front suspension darting – Reduce rear spring preload. Steering feels too heavy during – Reduce rear spring preload. acceleration – Lengthen limiter strap. Too much ski lift during cornering –…

• Page 58: Vehicle Transportation

  VEHICLE TRANSPORTATION Make sure that oil reservoir and fuel tank caps are properly installed. Tilt bed trailers can easily be equipped with a winch mechanism to afford ma- ximum safety in loading. Simple as it may seem, never drive your snowmo- bile onto a tilt bed trailer or any other kind of trailer or vehicle.

• Page 59
  MAINTENANCE _______________…

• Page 60: Break-In Inspection

  BREAK-IN INSPECTION We suggest that after the first 10 hours or 500 km (300 mi) of operation, whichever comes first, your vehicle be inspected by an authorized Ski-Doo dealer. The break-in inspection is very important and must not be neglected.

• Page 61
  BREAK-IN INSPECTION REPLACE ADJUST TIGHTEN BREAK-IN INSPECTION CHART LUBRICATE CLEAN INSPECT DRIVE SYSTEM Drive belt Drive pulley Drive pulley retaining screw tightening screw Driven pulley condition and preload Drive axle end bearing Track Drive chain Gearbox or chaincase oil BRAKE SYSTEM Brake fluid Brake hose, pads and disk STEERING…

• Page 62: Maintenance Schedule

  MAINTENANCE SCHEDULE Maintenance is very important for keeping your vehicle in safe operating condition. Proper maintenance is the owner’s responsibility. The vehicle should be serviced as per maintenance schedule. The maintenance schedule does not exempt the pre-ride inspection. WARNING Failure to properly maintain the vehicle according to the maintenance schedule and procedures can make it unsafe to operate.

• Page 63: Model

  Fuel filter (2) Add to fuel prior to engine lubrication. Fuel lines and connections (3) Fuel filter must be replaced. Carburetor venturi by an authorized Ski-Doo dealer. Throttle cable Air filter DRIVE SYSTEM Drive belt (4) Adjust drive belt height at every belt replacement..

• Page 64
  INSPECT LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND BRAKE SYSTEM Brake fluid — Brake hose, pads and disk…

• Page 65: V800 Model

  MONTHLY OR EVERY 800 km (500 mi) INSPECT LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND ENGINE Engine motor mounts Engine seals Exhaust system Engine lubrication —…

• Page 66
  LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND DRIVE SYSTEM (2) Adjust drive belt height at every Drive belt belt replacement.
• Page 67
  LUBRICATE EVERY YEAR OR 3200 km (2000 mi) REPLACE EVERY 2 YEARS OR 6000 km (3700 mi) To be performed by an *STORAGE authorized SKI-DOO dealer *PRESEASON PART/TASK LEGEND ELECTRICAL SYSTEM (8) Before installing new spark plugs EMS fault codes…

• Page 68: Maintenance Procedures

  If not, see your authorized Ski-Doo dealer. Other important items in the mainte- nance schedule that are more difficult and require special tools are best per- formed by your authorized Ski-Doo dealer. mmr2007-166-010_a WARNING TYPICAL 1. Air filter installed in air inlet duct…

• Page 69: Engine Coolant (V800 Model)

  Oil is highly than the mark. flammable when heated. If additional coolant is necessary or if entire system has to be refilled, refer to an authorized Ski-Doo dealer. TYPICAL mmo2007-001-002_a 1. Injection oil reservoir EXPANSION RESERVOIR NEAR MUFFLER 2.

• Page 70: Engine Oil (V800 Model)

  MAINTENANCE PROCEDURES Engine Oil (V800 Model) Engine Oil Level NOTICE Check level frequently and refill if necessary. Do not over- fill. Operating the engine with an improper level may severely dam- age engine. Wipe off any spillage. mmo2007-001-003_a 1. Maximum 2.

• Page 71: Exhaust System

  MAINTENANCE PROCEDURES Exhaust System NOTICE Severe engine damage can occur if grime particles enter the combustion chamber. Exhaust System Verification The tail pipe of the muffler should be 5. Remove spark plug. centered with the exit hole in the bot- tom pan.

• Page 72: Brake System

  Periodically verify the condition/ wear of the brake pads. Brake Adjustment No adjustment is provided for hydraulic brake. See an authorized Ski-Doo TYPICAL dealer if any problems. 1. Full level mark 2. Lower level mark…

• Page 73: Drive Belt

  Open engine riod, burred or rusty sheave, oil on belt compartment. or distorted spare belt. Contact an au- thorized Ski-Doo dealer. 2. Loosen collar screw on air silencer grommet. Drive Belt Removal 3. Disconnect engine vent hose from air silencer.

• Page 74
  NOTE: If correct adjustment unattainable, contact an authorized Ski-Doo dealer. The drive belt cord should be flush with mmo2008-001-011_a driven pulley edge. Adjust as required. TYPICAL Step 1: Slip the belt over the top edge of the…

• Page 75: Drive Pulley

  MAINTENANCE PROCEDURES Adjust drive belt height using Allen NOTE: Use precision digital tachome- screws. Loosen jam nuts then turns ter for engine RPM adjustment. Allen screws. NOTE: The adjustment has an effect – To lower belt in driven pulley: turn on high RPM only.

• Page 76: Track

  Ski-Doo high rotational speed. See your dealer. Ski-Doo dealer for maintenance or service of the drive pulley.

• Page 77
  MAINTENANCE PROCEDURES 6. Place upper O-ring to 0 kgf (0 lbf). WARNING 7. Position the tensiometer on track, To prevent serious injury to indi- halfway between front and rear idler viduals near the snowmobile: wheels. – NEVER stand behind or near a 8.
• Page 78
  2. Remove rear wheel caps (if so equipped). mmr2008-048-009_a 1. RH adjustment screw 5. If correct tension is unattainable, contact authorized Ski-Doo dealer. 6. Retighten retaining bolts 48 N•m ± 6 N•m (35 lbf•ft ± 4 lbf•ft). 7. Check track alignment as described mmr2008-048-007_a below.
• Page 79
  MAINTENANCE PROCEDURES Track Alignment WARNING Remove the tether cord cap WARNING from engine cutout switch Before checking track alignment, before performing any main- ensure that the track is free of all tenance or adjustment, un- particles which could be thrown less otherwise specified.

• Page 80: Front Suspension

  Visually inspect steering for tightness of components (steering arms, tie Front Suspension rods, ski bolts, ski legs, etc.). If nec- essary, contact an authorized Ski-Doo Front Suspension Lubrication dealer. Lubricate at grease fittings using SUS- PENSION GREASE (P/N 293 550 033).

• Page 81: Vehicle Care

  VEHICLE CARE Post-Operation Care Inspect the hood and repair any dam- age. Shut off the engine. Install rear of ve- hicle on a wide-base snowmobile me- Touch up all metal spots where paint chanical stand. has been scratched off. Spray all metal parts including ski legs using XPS Remove snow and ice from rear sus- LUBE (P/N 293 600 016).

• Page 82: Storage And Preseason Preparation

  Lift rear of vehicle until track is clear of the ground. Install on a wide-base snowmobile mechanical stand with a Preseason Preparation rear deflector panel. Refer to an authorized Ski-Doo dealer. NOTICE Have carburetor(s) CAUTION Use appropriate lift- cleaned-up before restarting engine ing device or have assistance to on so equipped models.

• Page 83: Technical Information

  TECHNICAL INFORMATION _______________…

• Page 84: Vehicle Identification

  550F ENGINE 1. Engine identification number in the event of loss. These numbers are required by the authorized Ski-Doo dealer to complete warranty claims properly. No warranty will be allowed by BRP if the engine serial number or vehicle identification number (V.I.N.)

• Page 85
  VEHICLE IDENTIFICATION mmo2007-001-001_a V800 ENGINE 1. Engine identification number _______________…

• Page 86: Epa Certified Engines

  For more detailed informa- When performing service on a certi- tion on this subject, you may contact fied Ski-Doo snowmobiles that carry the following locations: an emissions control information label, adjustments must be kept within pub- MAIL: lished factory specifications.

• Page 87: Specifications

  SPECIFICATIONS SKANDIC WT MODEL 550F ENGINE Engine type Number of cylinder Bore 76 mm (2.992 in) Stroke 61 mm (2.402 in) Displacement 553.4 cm³ (33.771 in³) Maximum horsepower RPM 6900 ± 100 RPM AXIAL FAN Deflection 9.5 mm ± 1.5 mm (.37 in ± .06 in) Axial fan belt adjustment Force 5 kgf (11 lbf)

• Page 88
  SPECIFICATIONS SKANDIC WT MODEL 550F DRIVE SYSTEM XPS synthetic chaincase oil SYNTHETIC CHAINCASE OIL Type Gearbox oil (P/N 413 803 300) Quantity 500 ml (16.9 U.S. oz) Drive pulley type TRA III Drive pulley calibration Clutch engagement 2500 ± 100 RPM Driven pulley type NDT 6-K VSA Width…
• Page 89
  Measure gap between slider shoe and bottom inside of track when exerting a downward pull to the track. Equal distance between edges of track guides and slider shoes. Drive belt height must be adjusted every time a new drive belt is installed. Confirm drive belt part number application with an authorized Ski-Doo dealer. _______________…
• Page 90
  SPECIFICATIONS SKANDIC SWT MODEL V800 ENGINE ROTAX V810 Engine type 4-stroke, Single Over Head Camshaft (SOHC), liquid cooled Number of cylinders Number of valves 8 valves (mechanical adjustment) Bore 91 mm (3.58 in) Stroke 61.5 mm (2.42 in) Displacement 800 cm³ (48.82 in³) Maximum horsepower RPM ±…
• Page 91
  SPECIFICATIONS SKANDIC SWT MODEL V800 ELECTRICAL SYSTEM Magneto generator output 460 Watt @ 6000 RPM CDI (Capacity Discharge Ignition) Ignition type by DENSO Make and type NGK DCPR8E Spark plug 0.7 mm to 0.8 mm (.028 in to .031 in) Battery 12 V, 21 A•h Headlamp…
• Page 92
  Measure gap between slider shoe and bottom inside of track when exerting a downward pull to the track. Equal distance between edges of track guides and slider shoes. Drive belt height must be adjusted every time a new drive belt is installed. Confirm drive belt part number application with an authorized Ski-Doo dealer. ______________…

• Page 93: Troubleshooting

  TROUBLESHOOTING _______________…

• Page 94: Troubleshooting Guidelines

  1. Engine is too hot, shut off the engine. – Check for clogged air duct passages. Remove any foreign materials. Check for proper fan belt condition and tension. See an authorized Ski-Doo dealer. ENGINE OVERHEATING (liquid cooled) 1. Engine overheating pilot lamp will light up if engine is too hot.

• Page 95
  (each piston on multi-cylinder engines). If no pulsating resistance is felt, it suggests a major loss of compression. Contact an authorized Ski-Doo dealer. ENGINE LACKS ACCELERATION OR POWER 1. D.E.S.S. did not read tether cord cap (D.E.S.S. key) code. D.E.S.S. pilot lamp blinks once every 1.5 seconds.
• Page 96
  – Clean/verify spark plug gap and identification number. Replace as required. 4. Too much oil supplied to engine (2-stroke). – Improper oil pump adjustment, refer to an authorized Ski-Doo dealer. 5. Water in fuel. – Drain fuel system and refill with fresh fuel.

• Page 97: Engine Management System Faults (V800)

  TROUBLESHOOTING GUIDELINES SNOWMOBILE CANNOT REACH FULL SPEED (cont’d) 5. Pulleys misaligned. – Contact an authorized Ski-Doo dealer. 6. Engine. – See items 1, 2, 6 and 7 of ENGINE LACKS ACCELERATION OR POWER. Engine Management System Faults (V800) ENGINE MANAGEMENT SYSTEM PILOT LAMP BLINKS 1.

• Page 98
  TROUBLESHOOTING GUIDELINES ______________…

• Page 99: Warranty

  WARRANTY _______________…

• Page 100: Brp Limited Warranty Usa And Canada: 2011 Ski-Doo

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP dealer at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile.

• Page 101
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2011 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP dealer authorized to distribute Ski-Doo snowmobiles in the country in which the sale occurred (“BRP dealer”);…
• Page 102
  – The 2011 Ski-Doo snowmobile must be purchased in the country in which the purchaser resides; and – Routine maintenance outlined in the Operator’s Guide must be timely per- formed in order to maintain warranty coverage. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
• Page 103
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We recom- mend discussing the issue with the authorized dealer’s service manager or owner. If the issue has not yet been resolved, please submit your complaint in writing or call the appropriate number below: In Canada…

• Page 104: Brp International Limited Warranty: 2011 Ski-Doo

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP distributor/dealer at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile. 2) LIMITATIONS OF LIABILITY…

• Page 105
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2010 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP distributor/dealer authorized to distribute Ski-Doo snow- mobiles in the country in which the sale occurred (“BRP distributor/dealer”);…
• Page 106
  – The 2011 Ski-Doo snowmobile must be purchased in the country or union of countries in which the purchaser resides. – Routine maintenance outlined in the Operator’s Guide must be timely per- formed in order to maintain warranty coverage. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
• Page 107
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We rec- ommend discussing the issue with the authorized distributor/dealer’s service manager or owner.

• Page 108: Brp Limited Warranty For The European Economic Area: 2011 Ski-Doo Snowmobiles

  All genuine Ski-Doo parts and accessories, installed by an authorized BRP distributor/dealer (at the time of delivery of the 2011 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile.

• Page 109
  This warranty coverage is available only if each of the following conditions has been fulfilled: – The 2011 Ski-Doo snowmobile must be purchased as new and unused by its first owner from a BRP distributor/dealer authorized to distribute Ski-Doo products in the country in which the sale occurred (“BRP distributor/dealer”);…
• Page 110
  BRP’s obligations under this warranty are limited to, at its sole discretion, repairing parts found defective under normal use, maintenance and service, or replacing such parts with new genuine Ski-Doo parts without charge for parts and labour, at any authorized BRP distributor/dealer during the warranty coverage period under the conditions described herein.
• Page 111
  9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this limited warranty, BRP suggests that you try to resolve the issue at the dealership level. We rec- ommend discussing the issue with the authorized distributor/dealer’s service manager or owner.
• Page 112
  This page is intentionally blank ______________…

• Page 113: Customer Information

  CUSTOMER INFORMATION ______________…

• Page 114: Privacy Information

  PRIVACY INFORMATION BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes. Furthermore, BRP and its affiliates may use its customer list to distribute marketing and promotional information about BRP and related products.

• Page 115: Change Of Address/Ownership

  If your address has changed or if you are the new owner of the vehicle, be sure to notify BRP by either: – Mailing one of the following card below; – North America Only: calling at 715 848-4957 (USA) or 819 566-3366 (Canada); – Notifying an authorized Ski-Doo dealer. In Canada In USA BOMBARDIER RECREATIONAL PRODUCTS INC.

• Page 116
  CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________…
• Page 117
  It is the owner’s responsibility to notify BRP. STOLEN UNITS: If your personal vehicle is stolen, you should notify BRP or an authorized Ski-Doo dealer. We will ask you to provide your name, address, phone number, the vehicle identification number and the date it was stolen.
• Page 118
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 119
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 120
  CHANGE OF ADDRESS/OWNERSHIP ______________…
• Page 121
  NOTES…
• Page 122
  NOTES…