Samsung scx 4100 мануал

• Page 1: Table Of Contents

  DIGITAL LASER MFP SCX-4100 SERVICE Manual DIGITAL LASER MFP CONTENTS 1. Precautions 2. Reference Information 3. Specifications 4. Summary of product 5. Disassembly and Reassembly 6. Alignment and Adjustments 7. Troubleshooting 8. Exploded Views and Parts List 9. Block Diagram…

• Page 2
  This service manual is also provided on the web, © Samsung Electronics Co.,Ltd. May 2004 the ITSELF system f Samsung Electronics Co., Ltd. Printed in Korea. http://itself.sec.samsung.co.kr VERSION NO. : 1.00 CODE : JC-0125A…

• Page 3: Precautions

  High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably trained and qualified service engineer. (2) Use only Samsung replacement parts There are no user serviceable parts inside the printer. Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire haz-ards.

• Page 4: Caution For Safety

  Take care not to cut or damage the power cable or plugs when moving the machine. (9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from the power source when such weather conditions are expected. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions.

• Page 5: Handling Precautions

  1.2.4 Assembly / Disassembly Precautions Replace parts carefully, always use Samsung parts. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly.

• Page 6: Disregarding This Warning May Cause Bodily Injury

  Precautions 1.2.5 Disregarding this warning may cause bodily injury (1) Be careful with the high temperature part. The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to cool down before disassembly. (2) Do not put finger or hair into the rotating parts.

• Page 7: Esd Precautions

  Precautions 1.3 ESD Precautions Certain semiconductor devices can be easily damaged by static electricity. Such components are commonly called “Electrostatically Sensitive (ES) Devices”, or ESDs. Examples of typical ESDs are: integrated circuits, some field effect transistors, and semiconductor “chip” components. The techniques outlined below should be followed to help reduce the incidence of component damage caused by static electricity.

• Page 8: Reference Information

  M2 long, M2 short). Spring Hook Standard : For general use Tweezers Standard : For general home use, small type. Software(Driver) installation CD ROM Cotton Swab Standard : For general home use, for medical service. Service Manual Samsung Electronics…

• Page 9: Acronyms And Abbreviations

  Intelligent Drive Electronics or Integrated Drive Electronics EEPROM Electronically Erasable Programmable Read Only Memory IEEE Institute of Electrical and Electronics Engineers. Inc Electro Magnetic Interference Image Output Terminal (Color print- Electro photographic er, Copier) Enhanced Parallel Port Isopropy Alcohol Service Manual Samsung Electronics…

• Page 10
  Read Only Memory Liquid Crystal Display SCF/SCT Second Cassette Feeder/Second Cassette Tray Light Emitting Diode SMPS Switching Mode Power Supply Laser Scanning Unit SPGP Samsung Printer Graphic Megabyte Processor Multi-Functional Product Samsung Printer Language Megahertz Spool Simultaneous Peripheral Operation Online MPBF…

• Page 11: Select A Location For The Printer

  • Provide the proper environment : — A firm, level surface — Away from the direct airflow of air conditioners, heaters, or ventilators — Free of extreme fluctuations of temperature, sunlight, or humidity — Clean, dry, and free of dust Service Manual Samsung Electronics…

• Page 12: The Sample Pattern For The Test

  The sample pattern shown in below is the standard pattern used in a factory. The contents of the life span and the printing speed are measured with the pattern shown in below. (The picture in the manual is 70% size of the actual A4 size.) 2.4.1 A4 5% Pattern Service Manual Samsung Electronics…

• Page 13
  Reference Information 2.4.2 A4 2% Pattern Service Manual Samsung Electronics…
• Page 14
  Reference Information 2.4.3 A4 IDC 5% Patten Service Manual Samsung Electronics…
• Page 15
  Reference Information MEMO Service Manual Samsung Electronics…

• Page 16: Specifications

  Specifications 3. Specifications Specfications are correct at the time of printing. Product specifications are subject to change without notice. See below for product specifications. 3.1 General Specifications Items SCX-4100 Remarks General Major Features Copier,Print,Scan Size (W*D*H) 16.6″x15.8″ x9.4″ (422x400x239mm) Net Weight(Inc. Toner Cartridge) 0.69 Kg…

• Page 17: Print Specification

  Specifications 3.2 Print Specification Items SCX-4100 Remarks PRINT Print Speed 15ppm/Ltr, 14ppm/A4 Print Method Laser Print Language Power Save Yes(5/10/15/30/45min.) Resolution Normal 600 x 600 dpi Toner Save LCD Only (Toner Save On/Off Setting method is in the Menu). Memory…

• Page 18: Copy Specification

  Specifications 3.4 Copy Specification Items SCX-4100 Remarks COPY Copy Quality Selection or Text 600x300dpi Original Image type Text/Photo 600x300dpi selection Mode Photo 600x600dpi for Platen FCOT Stand by Approx. 12 seconds From Cold Status Less than 54 seconds Copy Speed / Letter SDMC at all mode 15cpm/Ltr.

• Page 19
  Specifications 3.5 Paper Handiling Specification Items SCX-4100 Remarks Paper Handling Capacity( 20lbs) Main Tray 250sheets Bypass(MP Tray) Single Sheet Optional Cassette Output Capacity Face Down: 50Sheets/20lb Face Up: 1Sheet Output Control Face down/Face up Paper Size Main Tray Legal,A4,Letter, Folio,…
• Page 20
  Specifications 3.6 Other Specification Items SCX-4100 Remarks Software WHQL Win 3.x Win 95 Win 98&WinME Win NT 4.0 Win 2000 Win XP Mac Printer Only Linux Print, Scan Printer Printer driver only for WinXP Scanner Driver Printer Package TWAIN Remote Control…
• Page 21
  Specifications MEMO Service Manual Samsung Electronics…

• Page 22: Summary Of Product

  Summary of product 4. Summary of Product This chapter describes the functions and operating principles of the main component. 4.1 Printer Components 4.1.1 Front View Service Manual Samsung Electronics…

• Page 23: Rear View

  Summary of Product 4.1.2 Rear View Service Manual Samsung Electronics…

• Page 24: Control Panel

  Summary of product 4.1.3 Control Panel Service Manual Samsung Electronics…

• Page 25: System Layout

  Summary of Product 4.2 System Layout SCAN PART Service Manual Samsung Electronics…

• Page 26: Paper Feed Mechanism

  4.2.4 Fixing Part(Fuser) There are two types of fuser unit: Q-PID type, developed by Samsung, and only used on 220V Domestic models Heat Lamp type used on 220V Export models and all 110V models. The Heat Lamp type fuser consists of the Heat Lamp, Heat Roller, Pressure Roller, Thermistor, and Thermostat. It fixes toner to the paper using pressure and heat to complete the printing job.

• Page 27: Scanner Unit

  • CIS Driver Circuit — CIS Clock : 4.16MHz — Voltage Reference : 1.1V — CIS Line Time : 1.67ms/Line x 3Color(600dpi) • Scan Motor Driver Circuit — Motor Driver : SIA403A — Used Volt : 24V DC Service Manual Samsung Electronics…

• Page 28
  The controller detects the /HSYNC signal to adjust the vertical line of the image on paper. In other words after the /HSYNC signal is detected the image data is sent to the LSU to adjust the left margin on the paper. Service Manual Samsung Electronics…

• Page 29: Toner Cartridge

  — OPC Cleaning: Electrostatic process — Management of waste toner: Electro static process(Cleanerless Type) — OPC Drum protecting Shutter: No — Classifying device for toner cartridge: ID is classified by interruption of the frame channel 0.22mW -330V -970V -480V Service Manual Samsung Electronics…

• Page 30: Main Pba

  Circuits on the PBA drive include the main motor (paper feed, cartridge, fuser), clutch driver, pre-transfer lamp driver, heat-lamp driver, CIS driver, scan motor driver and fan driver. The signals from the paper feed jam sensor and paper empty sensor are inputted to the main board from the power supply PBA. Service Manual Samsung Electronics…

• Page 31: Flash Memory

  • Access Time : 70 nsec 4.3.3 SDRAM This is used as a buffer, system working memory area, etc. while printing and scanning. • Capacity : SCX-4100 8 M byte • Access Time : 15 nsec 4.3.4 Sensor input circuit 1) Paper Empty Sensing The Paper Empty sensor (Photo Interrupter) on the SMPS/HVPS PBA is monitored by the CPU.

• Page 32
  The motor driving circuit is activated when the Driver IC is enabled. An AN44060 (Motor driver IC) is used in this case. The resistance Rs value of sensing and the voltage value of the V reference can be changed by the motor driving volt- age value. Service Manual 4-11 Samsung Electronics…
• Page 33
  (PANEL CON.) 220V : 250V 2A H 220V : 250V T 5A H (H/L CON.) MHV OPC SUPPLY COVER OPEN SWITCH MANUAL SENSOR FEED SENSOR PAPER-EMPTY SENSOR EXIT SENSOR MAIN PBA CON. F101 250V L2A Service Manual 4-12 Samsung Electronics…
• Page 34
  When the ZENER diode is disconnected a blank page is printed out. (It is the same when a ZENER diode is disconnected from OPC ground.) Service Manual 4-13 Samsung Electronics…
• Page 35
  AVG : 60 Wh PRINTING 1.0 A 0.5A 1.0 A AVG : 300 Wh Sleep-Mode 0.2A 0.02A 0.03A AVG : 10 Wh 4) Length of Power Cord : 1830 ± 50mm 5) Power Switch : Fitted Service Manual 4-14 Samsung Electronics…

• Page 36: Fuser Ac Power Control

  PC1 is off, the voltage is cut off at the gate of Triac THY1, this Triac is therefore off, and thus the heat lamp is turned off. 1) Triac (THY1) feature — 12A,600V SWITCHING 2) Phototriac Coupler (PC3) — Turn On If Current : 15mA ~ 50mA(Design: 16mA) — High Repetive Peak Off State Voltage : Min 600V Service Manual 4-15 Samsung Electronics…

• Page 37
  This voltage is fed back into the set through the A/D converter. Based on this fed back value the PWM cycle is changed to maintain the required transfer voltage Page 4-10 has a different chip number Which is correct Service Manual 4-16 Samsung Electronics…
• Page 38
  Error Description Polygon motor error When the polygon motor’s speed doesn’t reach operating speed Hsync error The polygon motor’s speed is normal, but the Hsync signal is not created. Service Manual 4-17 Samsung Electronics…
• Page 39
  Summary of Product MEMO Service Manual 4-18 Samsung Electronics…

• Page 40: Disassembly And Reassembly

  3. Unplug the power cord. 4. Use a flat and clean surface. 5. Replace only with authorized components. 6. Do not force plastic-material components. 7. Make sure all components are in their proper position. Service Manual Samsung Electronics…

• Page 41
  1. Take the Cassette out of the printer. 3. Remove the 4 screws securing the Rear Cover and remove it, as shown below. Rear Cover Cassette 2. Remove the Front Cover in the direction of arrow. Service Manual Samsung Electronics…

• Page 42: Side Covers

  Frame Assembly. -Front Cover (see page 5-2) Left Cover 2. Remove 1 screw at the front of the unit. Unclip the right cover along the top edge and remove it from the Frame Assembly. Right Cover Service Manual Samsung Electronics…

• Page 43
  -Rear Cover (see page 5-2) -Side Cover(Left Cover, Right Cover)(see page 5-3) Scanner Ass’y 2. Remove the 2 connectors from the main PBA and release the ground wire from the Motor Drive Ass’y as shown below. Service Manual Samsung Electronics…
• Page 44
  3. Remove the CCD Cable, as shown below. FFC Cable Platen Cover 2. Release 8 clips (2 per side) securing the scanner upper frame to the scanner lower frame and remove the upper frame Scan Upper Service Manual Samsung Electronics…
• Page 45
  Scanner Module ETC Belt Pulley Bracket CIS Shaft 7. Remove the 2 screws and take out the Scan Motor Ass’y. 5. Push the Belt Holder and take out the Belt, as shown below. Scan Motor Belt Ass’y Service Manual Samsung Electronics…

• Page 46: Middle Cover

  1. Disconnect the OPE harness from the Main PBA and 2. Remove the 4 screws securing the OPE Unit from the remove the 4 screws securing the Middle Cover. Middle Cover. Remove it, as shown below. Middle Cover OPE Unit OPE Harness Service Manual Samsung Electronics…

• Page 47
  Heat Roller care not to damage the Exit Sensor. Fuser Ass’y Halogen Lamp 5.Remove 1 screw and take the Idle Gear out. Idle Gear 3. Remove 2 screws and take the Thermostat out of the Fuser. Thermostat Service Manual Samsung Electronics…
• Page 48
  Disassembly and Reassembly 6. Remove 4 screws and divide the Fuser into two parts. 8. Remove the Thermister from the Fuser Cover. Fuser Cover Thermister 7. Unwrap the Thermistor Harness, as shown below. Thermister Harness Service Manual Samsung Electronics…

• Page 49: Exit Roller

  3. Unplug 4 screws and take the LSU out. — Rear Cover (see page 5-2) — Side Covers (see page 5-3) — Scanner Ass’y (see page 5-4) — Middle Cover (see page 5-6) 2. Unplug 2 connector from the LSU. Service Manual 5-10 Samsung Electronics…

• Page 50
  — Left Side Cover (see page 5-3) 2. Remove the 6 screws from the Drive Ass’y. Note when re-fitting the motor Drive Ass’y tighten the screws in the order that they are numbered on the Motor Drive Ass’y base plate. Service Manual 5-11 Samsung Electronics…
• Page 51
  Main PBA. Then lift the Main PBA out as shown — Rear Cover (see page 5-2) below. — Side Covers (see page 5-3) — Fuser Connector (see page 5-7) Main PBA — Engine Shield Ass’y (see page 5-11) Service Manual 5-12 Samsung Electronics…
• Page 52
  — Engine Shield Ass’y (see page 5-11) 2. Unplug 1 connector and remove 3 screws then take the Inlet Bracket out. Inlet Bracket 3. Remove 1 screw and unplug 1 connector from the Main PBA. Service Manual 5-13 Samsung Electronics…

• Page 53: Transfer Roller

  3. Unplug the PTL Holder Connector then remove the PTL Holder and PTL Lens as shown below. Take care to note the orientation of the PTL lens and ensure it is refitted correctly Lens Holder Service Manual 5-14 Samsung Electronics…

• Page 54: Feed Roller

  Feed Gear2 3. Pull up the Feed Idle Bush and Feed Idle Shaft, as Idle Gear shown below. Feed Idle Shaft Bush 6. Remove the Feed Gear 1 Ass’y, as shown below. Feed Gear1 Ass’y Service Manual 5-15 Samsung Electronics…

• Page 55
  Disassembly and Reassembly 7. Remove the Feed Roller and Feed Roller1, as shown below. Feed Roller Feed Roller1 Service Manual 5-16 Samsung Electronics…
• Page 56
  — Feed Bracket and Gears (See page 5-14 steps 4 — 6) (Pick up) Solenoid 2. Remove the Pick up Gear Ass’y, as shown below. (Regi) Solenoid Pick up Gear Ass’y 3. Remove the Pick up Ass’y, as shown below. Bush Pick up Ass’y Service Manual 5-17 Samsung Electronics…
• Page 57
  Disassembly and Reassembly MEMO Service Manual 5-18 Samsung Electronics…

• Page 58: Alignment And Adjustments

  1 : On, 2 : Off (-1000V +300V/-150V) THV ON (1300V) 1 : On, 2 : Off (+1300V ± 20V) THV ADC 1300V 1 : On, 2 : Off THV ADC 600V~3550V 1 : On, 2 : Off (Compare each ADC Value) Service Manual Samsung Electronics…

• Page 59: Paper Path

  4) The paper then passes through the paper exit sensor and out of the set. (Jam 2 occurs if the trailing edge of the paper does not pass the exit sensor within a certain time of the paper leading edge activating the exit sensor) Service Manual Samsung Electronics…

• Page 60: Clearing Paper Jams

  If there is any resistance and the paper does not move when you pull or if you cannot see the paper in this area, skip to the fuser area around the toner cartridge. See page 6-5 Service Manual Samsung Electronics…

• Page 61: In The Paper Exit Area

  If there is any resistance and the paper does not move when you pull or if you cannot see the paper in the jam cover, continue to step 6. Service Manual Samsung Electronics…

• Page 62: In The Fuser Area Or Around The Toner Cartridge

  The error message may also occur when the paper is not properly fed into the machine through the manual feeder. In that case, pull the paper out of the machine. Service Manual Samsung Electronics…

• Page 63: Printing The System Data List

  4 When the display asks you to confirm your selection, press Start/Enter. The machine prints a cleaning page. Toner particles on the drum surface are affixed to the paper. 5 If the problem remains, repeat steps 1 through 4. Service Manual Samsung Electronics…

• Page 64: Consumables And Replacement Parts

  • A paper jam has occurred in the manual • Clear the jam. feeder or the machine detects non- feeding from the manual feeder. Paper has jammed in the paper exit area. Paper Jam 2 Clear the jam. Check Inside Service Manual Service Manual Samsung Electronics Samsung Electronics…

• Page 65: Periodic Defective Image

  Black spot and image ghost Pressure Roller 59.7mm black spot on the backside L S U Fuser Toner Cartridge MP Sensor Tramsfer Roller OPC Drum SCAN PART Heat Roller Charge Roller Pressure Roller Supply Roller Developing Roller <Rollers Layout> Service Manual Samsung Electronics…

• Page 66: Troubleshooting

  Remove if found. 5. Contamination of the OPC drum. 5. If the problems are not solved, replace the toner cartridge. 6. Depression or deformation of the surface 6. Replace the transfer roller. of the transfer roller Service Manual Samsung Electronics…

• Page 67: Horizontal Black Bands

  If the roller’s life is expired, transfer roller’s life has expired. replace it. Note. Cleaning the inside of the set to remove excess toner particles or paper dust will reduce the occurrence of this problem.. Service Manual Samsung Electronics…

• Page 68: Light Image

  Note if 1 and 2 do not resolve the problem Digital Printer and the problem persists replace the HVPS. 3. VD0 signal of the Main PBA is Low state. 3. Replace the LSU Unit or Main PBA. Service Manual Samsung Electronics…

• Page 69: Uneven Density

  4. Is the movement(Up and Down) of 4. Clean the transfer roller bushes. the transfer roller smooth? 5. Is the HVPS normal? 5. Clean the high voltage charge terminals. If this does not resolve the problem replace the HVPS. Service Manual Samsung Electronics…

• Page 70
  Digital Printer OHP, a higher transfer voltage is required. Remember to set back to normal paper after Digital Printer use. Digital Printer Digital Printer Service Manual Samsung Electronics…
• Page 71
  2. If the transfer roller is contaminated, run Digital Printer stains on the face of page will occur. PC Cleaning Mode Print 2 or 3 times and Digital Printer then perform Self-Test 2 or 3 times to remove contamination. Service Manual Samsung Electronics…
• Page 72
  3. When the printer turns on, several blank pages print. Check and Cause Solution 1. Abnormal solenoid. 1. Perform the engine self test using TECH Mode to check if the Solenoid is normal. If the problem persists replace the main Service Manual Samsung Electronics…

• Page 73: Copy Problems

  Black page is printed out when Copying. Check and Cause Solution 1. Check for CIS problem on the Main PBA. 1. Check the CIS harness is properly connected. 2. Check shading profile. 2. Redo shading profile in the tech mode. Service Manual Samsung Electronics…

• Page 74: Defective Image Quality

  2. Check the gap between original and scanner 2. A gap of more than 0.5 mm can cause a blurred glass. image. Ensure rollers and cover close correctly. Replace as necessary. 3. Check printing quality. 3. See «Print» troubleshooting. Service Manual Samsung Electronics…

• Page 75: Wrong Print Position

  6 If the paper feeds into the printer and 6. Check the SMPS PBA, Main PBA and Jam 0 occurs, perform Tech Mode to all connections. Replace any faulty check feed sensor. parts or the Service Manual 7-10 Samsung Electronics…

• Page 76
  Check all ribs, claws and springs. • It occurs when the Spring of a Guide claw is broken or damaged. • It occurs when the Heat-Roller or Pressure-Roller is seriously contaminated with toner. Service Manual 7-11 Samsung Electronics…

• Page 77: Paper Rolled In The Fuser

  Clean the surface of the rollers with IPA or water 2. Damaged or deformed ribs, claws or springs. 2. Check for damage or deformation of the print claws and the holder plate claws, and repair or replace as appropriate. Service Manual 7-12 Samsung Electronics…

• Page 78: Paper Rolled On The Opc Drum

  Use the gearwheel at the side to rotate the OPC drum and pull the paper from the cassette. • Clean fingerprints on the OPC gently with soft tissue, taking care not to scratch the surface. Service Manual 7-13 Samsung Electronics…

• Page 79: Fuser Error

  Use TECH mode to test the LSU — Replace the LSU 2. LSU motor is faulty. — Replace a main board if the same error persists after replacing a LSU. 3. Check the HSYNC signal. Service Manual 7-14 Samsung Electronics…

• Page 80: Paper Empty

  1. Deformed paper sensor actuator or faulty sensor. 1. Replace the defective actuator or sensor. 2. SMPS PBA or Main PBA is defective 2. Replace the SMPS PBA or MAIN PBA as appropriate. 3. Faulty cables or connectors. Service Manual 7-15 Samsung Electronics…

• Page 81: Cover Open

  2. The tab on the front cover may be damaged or broken 2. Replace the front cover. 3. Check the connector and cables between Switch and 3. Replace the Main Control board or Cover Open main PBA. S/W as necessary. Service Manual 7-16 Samsung Electronics…

• Page 82
  1. Use TECH mode(“cover sensor test”) to check cover switch operation. Check and replace switch if necessary. 2. Check the connector and cables between Switch and main PBA. 2. Replace the Main Control board or Cover Open S/W as necessary. Service Manual 7-17 Samsung Electronics…

• Page 83: Defective Motor Operation

  2. LCD panel does not come on but normal start up 2. Replace the OP panel. sounds are heard. 3. After replacing SMPS display does not come on and no 3. Replace the main PBA panel. start up sounds are heard. Service Manual 7-18 Samsung Electronics…

• Page 84
  When printing, vertical lines are not straight. Check and Cause Solution 1. Check stability of 24V supply to LSU. 1. 24V stable — Replace LSU. 24V unstable replace SMPS, if the problem persists replace the main PBA. Service Manual 7-19 Samsung Electronics…

• Page 85: Service For The Life Of Toner Cartridge

  Troubleshooting 7.5 Toner Cartridge Service Only toner cartridges supplied by Samsung should be used. Printing defects or set damage caused by the use of non-approved toner cartridges or un-licensed toner refills are not covered by the guarantee. 7.5.1 Precautions on Safe-keeping of Toner Cartridge Excessive exposure to direct light for more than a few minutes may cause damage to the cartridge.

• Page 86
  (a) Check that the terminals problem persists replace the (contact points) of the toner cartridge. cartridge and the set are clean. (b) Check that the terminals (contact points) of the toner cartridge and the set are not damaged. Service Manual 7-21 Samsung Electronics…
• Page 87
  (contact point) of the toner toner cartridge is recycled over cartridge and the set are not 2 times. damaged. If ‘nearly empty’ cartridges are collected for re-use this is judged as recycling the toner cartridge. Service Manual 7-22 Samsung Electronics…
• Page 88
  (a) Check if foreign substances are stuck to the terminal (point of contact) of the toner cartridge or set. (b) Check if the terminal assembly is normal. (Especially check the developer roller terminal.) Service Manual 7-23 Samsung Electronics…
• Page 89
  9and perhaps even uninstalling their dri- vers) to ensure the printer works by itself. If you are using a USB hub try connecting directly to the back of the PC instead. Service Manual 7-24 Samsung Electronics…
• Page 90
  Turn the PC and printer off, and reboot the system to print again. If not solved, double-click the printer in my computer If the regular fonts are not printed this time again. the cable must be defective so replace the cable with new one. Service Manual 7-25 Samsung Electronics…

• Page 91: Abnormal Printing

  2. Ensure that the correct driver is loaded. Use the driver supplied on the CD or downloaded from the Samsung web site. DO NOT use the Microsoft driver supplied with the Windows operating system. If the printer is a GDI or SPL type printer ensure that…

• Page 92: Spool Error

  If there is a problem with the printer (out of toner, offline, out of paper etc.) the job may take a long time to delete as it must wait for a time out. Service Manual 7-27 Samsung Electronics…

• Page 93
  Troubleshooting MEMO Service Manual 7-28 Samsung Electronics…

• Page 94: Exploded Views And Parts List

  8.7 Cassette Unit Assembly ……..page(8-14) Service Manual Samsung Electronics…

• Page 95: Main Assembly

  Exploded View & Parts List 8.1 Main Assembly Frame Toner Cartridge Service Manual Samsung Electronics…

• Page 96
  EXPLODED VIEW & PARTS LIST Main Assembly Parts List SA : Service Available O : Service available X : Service not available Description SEC.Code Q’ty Remark SCX-4100 MEA UNIT-COVER MIDDLE JC97-01958A SCX-4100 MEA UNIT-COVER REAR JC97-01959A SCX-4100 COVER-M_REAR JC63-00475A COVER-M_REAR DOOR…

• Page 97: Frame Assembly

  Exploded View & Parts List 8.2 Frame Assembly Service Manual Samsung Electronics…

• Page 98
  IPR-P-GROUND_EARTH TR JC70-00309A SPRING-ETC 6107-001162 ROLLER-FEED ROLLER 1 JC66-00526A PMO-BUSHING FEED JC72-00382B ROLLER-FEED JC66-00598A SPRING-TS 6107-001165 Spring-act,Manual IPR-P-EARTH TRANSFER JC70-00307A HOLDER-PTL JC61-00583A LENS-PTL JC67-00027A BUSH-M-TR L JC61-00588A SPRING ETC-TR L HAWK JC61-00047A SPRING-TS 6107-001165 Spring-act,Feed PMO-BUSHING_TR(L) JC72-00102A Service Manual Samsung Electronics…
• Page 99
  58-7 HOUSING-M-PICK_UP JC61-00591A MEA UNIT-CLUTCH JC97-01788A 59-1 GEAR-FEED 1 JC66-00393A 59-2 PMO-COLLAR_SPRING JC72-00978A 59-3 SPRING-TS 6107-001171 59-4 PMO-HUB CLUTCH JC72-00981A ELA HOU-FUSER_220V JC96-03135B 220V ELA HOU-FUSER_110V JC96-03135A 110V RMO-RUBBER EXIT JC73-40915A PBA MAIN-PTL JC92-01620B IPR-GROUND_SAW JC63-00465A Service Manual Samsung Electronics…

• Page 100: Scanner Unit Assembly

  Exploded View & Parts List 8.3 Scanner Unit Assembly Service Manual Samsung Electronics…

• Page 101
  Exploded View & Parts List Scanner Unit Assembly Parts List SA : Service Available O : Service available X : Service not available Description SEC.Code Q’ty Remark UNIT SCAN JC96-03136A SCX-4100 COVER-M-PLATEN JC63-00454A SHEET-WHITE SPONGE JC63-00209A HINGE PIVOT JC61-00929A COVER-M-SCAN UPPER JC63-00452A GLASS SCAN…

• Page 102: Fuser Unit Assembly

  Exploded View & Parts List 8.4 Fuser Unit Assembly Service Manual Samsung Electronics…

• Page 103
  ROLLER-M-EXIT F/UP JC66-00380A RUBBER EXIT JC73-00017A ROLLER-PRESSURE JC66-00731A BEARING-PRESSURE/R JC66-10901A SPRING-ETC-BEARING PR JC61-00453A PMO-BUSHING TX JC72-00382A HOLDER-ACTUATOR JC61-00581A PMO-ACTUATOR_EXIT JC72-00987A FRAME_FUSER JC61-00946A GUIDE-M-INPUT JC61-00595A SPRING-TS 6107-001165 NUT-HEXAGON 6021-000222 LABEL(P)-CAUTION, HOT_FUSER JC68-30928D PLATE-P-CLAW JC61-00605A COVER-LAMP_L JC63-00521A Service Manual 8-10 Samsung Electronics…
• Page 104
  Fuser Unit Assembly Parts List SA : Service Available O : Service available X : Service not available Description SEC.Code Q’ty Remark WASHER-PLAIN 6031-001051 LABEL(R)-HV FUSER JC68-00407A SCREW-TAPTITE 6006-001078 SCREW-MACHINE 6006-001193 SCREW-TAPTITE 6603-000269 SCREW-TAPTITE 6003-000196 Service Manual 8-11 Samsung Electronics…

• Page 105: Middle Cover Unit Assembly

  Exploded View & Parts List 8.5 Middle Cover Unit Assembly Service Manual 8-12 Samsung Electronics…

• Page 106
  SEC.Code Q’ty Remark MEA UNIT-COVER MIDDLE JC97-01958A COVER-M_MIDDLE JC63-00473A PMO-STACKER JC72-01340A STOPPER-M-LEVER JC61-00949A SPRING ETC-TS-CHARGE APOLLO JC61-00026A PMO-SUB_M_STACKER JC72-01343A PMO-BUSHING_F/DOWN JC72-00387A WINDOW-M LCD JC64-00153A KEY-M_START JC64-00151A KEY-M_STOP JC64-00150A KEY-M_MENU JC64-00152A PBA SUB-PANEL JC92-01586A COVER-M-PANEL JC63-00474A Service Manual 8-13 Samsung Electronics…
• Page 107
  SEC.Code Q’ty Remark ELA UNIT-DRIVE JC96-03138A BRACKET-P-GEAR 1400 JC61-00598A GEAR-RDCN 53/26 JC66-00388A GEAR-RDCN 113/33 JC66-00391A GEAR-RDCN 57/18 JC66-00389A WASHER-PLAIN 6031-000023 BRACKET-P-MOTOR 1400 JC61-00599A GEAR-RDCN 103/41 JC66-00390A GEAR-RDCN 90/31 JC66-00392A MOTOR STEP 7.5 JC31-00020A PMO-IMPELLER_DRV JC72-00825A Service Manual 8-14 Samsung Electronics…

• Page 108: Cassette Unit Assembly

  Exploded View & Parts List 8.7 Cassette Unit Assembly Service Manual 8-15 Samsung Electronics…

• Page 109
  JC61-00580A SPRING ETC-LOCKER,PLATE JG61-70531A PLATE-P-KNOCK_UP JC61-00603A SPRING-CS 6107-001166 PMO-EXTENSION SMALL JC72-00971A GUIDE-M-EXTENSION L2 JC61-00918B FRAME-M_CASSETTE JC61-00876A PMO-PLATE_LOCKER JC72-00972A SPRING ETC-EXIT ROLL FD JC61-70911A ROLLER-M-IDLE FEED JC66-00529A SPRING-ES 6107-001047 GUIDE-M_CASSETTE JC61-00944A CAM-M-KNOCK_UP JC66-00719A RPR-PAD CASSETTE JC73-00141A Service Manual 8-16 Samsung Electronics…

• Page 110: Block Diagram

  Block Diagram 9. Block Diagram Service Manual Samsung Electronics…

• Page 111: Connection Diagram

  Connection Diagram 10. Connection Diagram Service Manual 10-1 Samsung Electronics…

Quick Links

• Page 2
  This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to the use of this manual.
• Page 3
  Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding Samsung products, contact the SAMSUNG customer care center. Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD &…
• Page 4
  MALAYSIA 1800-88-9999 PHILIPPINES 1800-10-SAMSUNG (7267864) SINGAPORE 1800-SAMSUNG (7267864) THAILAND 1800-29-3232 02-689-3232 TAIWAN 0800-329-999 VIETNAM 1 800 588 889 SOUTH AFRICA 0860 7267864 (SAMSUNG) U.A.E 800SAMSUNG (7267864) Web Site www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.ru www.samsung.com/ur…

• Page 5: Table Of Contents

  Loading Paper … 1.8 Making Connections … 1.11 Turning the Machine On … 1.13 About Samsung Software … 1.14 Installing Samsung Software in Windows … 1.16 Repairing Software … 1.22 Removing Software … 1.23 Changing the Display Language … 1.25 Setting the Paper Size and Type …

• Page 6
  What is an Overlay? … 3.18 Creating a New Page Overlay … 3.18 Using a Page Overlay … 3.20 Deleting a Page Overlay … 3.21 Setting Up the Locally Shared Printer … 3.22 In Windows 9x/Me … 3.22 In Windows NT 4.0/2000/XP … 3.23 OPYING Chapter 4: Loading Paper for Copying …
• Page 7
  Chapter 5: Scanning Basics … 5.2 Scanning Using Samsung SmarThru … 5.2 Scanning Process with TWAIN-enabled Software … 5.6 Chapter 6: Getting Started … 6.2 Installing the MFP Driver … 6.3 Using the MFP Configurator … 6.7 Configuring Printer Properties … 6.11 Printing a Document …
• Page 8
  Common Linux Problems … 8.20 PECIFICATIONS Appendix A: General Specifications … A.2 Scanner and Copier Specifications … A.3 Printer Specifications … A.4 Paper Specifications … A.5 Overview … A.5 Supported Sizes of Paper … A.6 Guidelines for Using Paper … A.7 Paper Specifications …
• Page 9
  Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people: 1. Read and understand all instructions. 2. Use common sense whenever operating electrical appliances. 3.
• Page 10
  14. Unplug the machine from the, PC and AC wall outlet, and refer servicing to qualified service personnel under the following conditions: • When any part of the power cord, plug, or connecting cable is damaged or frayed. • If liquid has been spilled into the machine. •…

• Page 11: Laser Safety Statement

  Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.

• Page 13: Radio Frequency Emissions

  Radio Frequency Emissions FCC Information to the User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

• Page 14
  Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of European countries. In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
• Page 15
  Replacing the Fitted Plug (for UK Only) MPORTANT The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse.
• Page 17
  Differences Between British and American English British English Cancelling Favourite Colour Colours Coloured Centre Grey Greyscale Millimetres Discolour Fibre Emphasise Recognise Organise Authorise Customise Labelling American English Canceling Favorite Color Colors Colored Center Gray Grayscale Millimeters Discolor Fiber Emphasize Recognize Organize Authorize Customize…

• Page 18: Chapter 1: Getting Started

  • Loading Paper • Making Connections • Turning the Machine On Installing Software • About Samsung Software • Installing Samsung Software in Windows • Repairing Software • Removing Software Setting Up the Machine System • Changing the Display Language • Setting the Paper Size and Type •…

• Page 19: Unpacking

  Unpacking Remove the machine and all accessories from the packing carton. Make sure that the machine has been packed with the following items. If there is a missing item, contact the retailer where you bought the machine: Starter Toner Cartridge *The 1,000 pages and 3,000 pages toner cartridges have different shapes.

• Page 20: Selecting A Location

  Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. The area should be well-ventilated and away from direct sunlight or sources of heat, cold and humidity. Do not set the machine close to the edge of your desk or table.

• Page 21: Understanding The Component Location

  Understanding the Component Location These are the main components of your machine: Front View Jam Cover Front Output Tray (Face down) Front Paper Output Extension Manual Feeder Guides Manual Feeder Rear View Rear Cover ETTING TARTED Document Cover Paper Tray Power Switch AC Power Cord Connector Document Glass…

• Page 22: Control Panel Functions

  Control Panel Functions Adjusts the brightness of the documents for the current copy job. Selects the number of copies. Displays the current status and prompts during an operation. Scrolls through the options available for the selected menu item. Enters Menu mode and scrolls through the menus available and sends you back to Standby mode.

• Page 23: Installing The Toner Cartridge

  Installing the Toner Cartridge Open the front cover. Remove the starter toner cartridge from its bag. Don’t use a knife or other sharp object as it might scratch the drum of the cartridge. Gently roll the cartridge 5 or 6 times to distribute the toner evenly inside the cartridge.

• Page 24
  Close the front cover. Make sure that the cover is securely closed. : When printing text at 5% coverage, you can expect a toner cartridge life of approximately 3,000 pages. (1,000 pages for the toner cartridge that is shipped with the printer.) ETTING TARTED…

• Page 25: Loading Paper

  Loading Paper You can load approximately 250 sheets. To load a stack of Letter-sized paper: Pull open the paper tray and remove it from the machine. Fan the edges of the paper stack to separate the pages. Then tap the stack on a flat surface to even it up. Insert the paper stack into the paper tray with the side you want to print on facing down.

• Page 26: Changing The Paper Size In The Paper Tray

  Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams. Insert and slide the paper tray back into the machine. : After you load the paper, you need to set up your machine for the paper type and size you loaded.

• Page 27
  After inserting paper into the tray, slide in the guide until it lightly touches the end of the paper stack. For paper smaller than letter, adjust the paper length guide accordingly. Pinching the paper width guide as shown, move it toward the stack of paper until it lightly touches the side of the stack.

• Page 28: Making Connections

  Universal Serial Bus (USB) cable. Using a Parallel Cable (Windows only) : To connect the printer to the parallel port of the computer requires a certified parallel cable. You will need to buy a IEEE1284 compliant cable.

• Page 29
  Plug the USB printer cable into the connector on the back of the printer. Connect the other end of the cable to the USB port on your computer. See your computer User’s Guide if you need help. OTES • For using a USB cable, you must be running Windows 98/Me/ 2000/XP.

• Page 30: Turning The Machine On

  Turning the Machine On Plug one end of the supplied three-pronged electrical type cord into the AC socket on the machine and the other end into a properly grounded AC outlet. Press the power switch to turn the machine on. “Warming Up Please Wait”…

• Page 31: About Samsung Software

  The CD-ROM provides you with the following software: Windows GDI Driver To use your machine as a printer and scanner in Windows, you must install the GDI driver. For information about installing the GDI driver in Windows, see page 1.16.

• Page 32: Printer Driver Features

  Printer Driver Features Your printer drivers support the following standard features: • Paper source selection • Paper size, orientation and media type • number of copies The following table lists a general overview of features supported by your printer drivers.

• Page 33: Installing Samsung Software In Windows

  Installing Samsung Software in Windows System Requirements Before you begin, ensure that your system meets the minimum requirements. Verify the following: Operating system Free disk space At least Internet Explorer 5.0 OTES • For Windows NT 4.0/2000/XP, the system administrator should install the software.

• Page 34: Installing Samsung Software

  OK. When the following window opens, connect your machine to the computer and turn the printer on. Then click Next. If the machine is already connected and turned on, this screen does not appear. Skip to the next step.

• Page 35
  Otherwise, Skip to step 6. 1.18 ETTING TARTED such as printer driver, Twain driver, Remote Control Panel. This is Recommended for most users. software and the components you want to install. After selecting the language and the component(s), click Next.
• Page 36
  When the test page prints out correctly, click Yes. If not, click No to reprint it. To register yourself as a user of Samsung Printers, select the check box and click Finish. You are now accessed to the Samsung web site.

• Page 37: Installing Samsung Smarthru

  Installing Samsung SmarThru Insert the supplied CD-ROM into your CD-ROM drive. Click Install SmarThru. Click Next. Follow the on-screen instructions and click Next. Click Next. Select the installation type and click Next. 1.20 ETTING TARTED : SmarThru 4 does not support Windows 95.

• Page 38
  The software installation supports two types of setup: • Typical: Program will be installed with the most common options and is recommended for most users. • Custom: You may choose the options you want to install. If you select the Custom installation, you may choose the components you want to install.

• Page 39: Repairing Software

  Repairing is required if your installation fails or the software does not work properly. This Repairing procedure does not repair SmarThru software. You can select Start → Programs → Samsung SCX-4100 Series → Maintenance. Otherwise, Insert the supplied CD-ROM into your CD-ROM drive.

• Page 40: Removing Software

  Uninstall is required if you are upgrading the software or if your installation fails. You can uninstall the item you want using the Windows uninstallShield. Uninstalling the MFP Driver You can select Start → Programs → Samsung SCX-4100 Series → Maintenance. Otherwise, Insert the supplied CD-ROM into your CD-ROM drive.

• Page 41: Uninstalling Samsung Smarthru

  Uninstalling Samsung SmarThru are closed on your computer. A system reboot is required after the software is uninstalled. From the Start menu, select Programs. Select SmarThru 4, and then select Uninstall SmarThru 4. When your computer asks you to confirm, click OK.

• Page 42: Changing The Display Language

  Setting Up the Machine System Changing the Display Language To change the language that displays on the display of the control panel, follow these steps: Press Menu/Exit until «Machine Setup» appears on the top line of the display. Press the scroll button ( on the bottom line of the display.

• Page 43: Setting The Paper Size And Type

  Setting the Paper Size and Type After loading paper in the paper tray, you need to set the paper type and size using the control panel buttons. These settings will apply to Copy modes. For PC-printing, you need to select the paper type and size in the application program you use.

• Page 44: Using The Save Modes

  Selecting «Off» means that toner save mode turns off. : For PC-printing, you can also turn toner save mode on or off, in the printer properties. See page 3.9. Power Save Mode Power Save mode allows your machine to reduce power consumption when it is not in actual use.

• Page 45
  1.28 ETTING TARTED…

• Page 46: Chapter 2: Paper Handling

  APER ANDLING This chapter introduces you to the basics of selecting print materials and loading them into your machine. This chapter includes: • Selecting Print Materials • Selecting an Output Location • Loading Paper in the Paper Tray • Using the Manual Feeder…

• Page 47: Selecting Print Materials

  Selecting Print Materials You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies, and so on. Always use print materials that meet the guidelines for use with this machine. See “Paper Specifications” on page A.5. To get the best possible print quality, use only high-quality copier-grade paper.

• Page 48: Guidelines For Paper And Special Materials

  Guidelines for Paper and Special Materials When selecting or loading paper, envelopes, or other special material, keep these guidelines in mind: • Always use paper and other materials that conform with the specifications listed under “Paper Specifications” on page A.5. •…

• Page 49: Selecting An Output Location

  • Do not use Carbonless paper and Tracing paper. Use of these types of paper could result in chemical smells and could damage your printer. Selecting an Output Location The machine has two output locations; the rear output slot (face up) and the front output tray (face down).

• Page 50: Printing To The Front Output Tray (Face Down)

  Printing to the Front Output Tray The front output tray collects printed paper face-down in the order in which it was printed. The tray should be used for most print jobs. If you use paper which is not long enough to reach the front output tray, use the jam cover.

• Page 51: Printing To The Rear Output Slot (Face Up)

  Close the jam cover. In order to close the cover, push the tab to the left and hold it down. Then lower the cover carefully until the cover is holding down the tab. Then you can move your hand and finish lowering the cover. Be careful not to pinch your fingers! •…

• Page 52
  To use the rear output slot: Open the rear cover by pulling it upward. : The fusing area inside the rear part of your machine AUTION becomes hot once the machine is turned on. Be careful when you access this area. If you do not want to use the rear output slot, close the rear cover.

• Page 53: Loading Paper In The Paper Tray

  Loading Paper in the Paper Tray The paper tray can hold a maximum of 250 sheets of 20 lb(75g/ ) plain paper. For copying, you can use A4-, Letter- or Legal- sized paper only. For PC-printing, you can use many different sizes of paper;…

• Page 54: Using The Manual Feeder

  Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized materials can be printed with this printer. The minimum size is 76 by 127 mm (3.0 by 5.0 in.) and the maximum size is 216 by 356 mm (8.5 by 14 in.).

• Page 55
  AUTION transparencies. If not, they may tear while exiting the machine. Adjust the paper guide to the width of the print material. manual feeder, the printed side should be facing down with an uncurled edge to the machine. If you experience problems with paper feed, turn the paper around.

• Page 56: Setting The Paper Type And Size For The Manual Feeder

  Setting the Paper Type and Size for the Manual Feeder After loading paper in the manual feeder, you need to set the correct paper type and size using the control panel buttons. These settings will apply to Copy mode. For PC-printing, you need to select the paper size in the application program you use.

• Page 57
  2.12 APER ANDLING…

• Page 58: Chapter 3: Printing

  • Printing Multiple Pages on One Sheet of the Paper • Printing a Reduced or Enlarged Document • Fitting Your Document to a Selected Paper Size • Printing Posters • Using Watermarks • Using Overlays • Setting Up the Locally Shared Printer…

• Page 59: Printing A Document In Windows

  To take advantage of the printer features provided by your machine, click Properties or Preferences in the application’s print window and go to step 4. If you see a Setup, Printer or Options button, click it instead. Then click Properties on the next screen. RINTING…

• Page 60
  Now you see the Samsung SCX-4100 Series Properties window, which allows you to access all of information you need when using your machine. The Layout tab first displays. The preview image shows the sample page with the settings you specified.
• Page 61
  • Reverse All Pages: Your machine prints from the last • Print Odd Pages: Your machine prints only the odd • Print Even Pages: Your machine prints only the even Click other tabs on the top of the Samsung SCX-4100 Series Properties window to access other features, if needed.

• Page 62: Canceling A Print Job

  To stop a print job from the Printers folder: If the print job is waiting in a print queue or print spooler, such as the Printer group in Windows, delete the job as follows: Click the Windows Start menu. For Windows 9x/NT4.0/2000/Me, Select Settings and then Printers.

• Page 63: Using A Favorite Setting

  To delete a favorite setting item, select it from the list and click Delete. You can also restore the printer driver’s default settings by selecting <Printer Default> from the list. Using Help Your machine has a help screen that can be activated using the Help button in the printer’s Properties window.

• Page 64: Setting Paper Properties

  Setting Paper Properties Use the following options for paper handling. See page 3.2 for more information about accessing printer’s Properties. Click the Paper tab to access many paper properties. Property Copies allows you to choose the number of Copies copies to be printed. You can enter up to 999.

• Page 65: Setting Graphic Properties

  Make sure that Type is set to Printer Default. If you load a different type of print material, select the corresponding paper type.

• Page 66
  • Printer Setting: When you select this option, the Toner Save feature is determined by the setting you’ve made on the control panel of the machine.

• Page 67: Printing Multiple Pages On One Sheet Of The Paper

  You can print up to 16 pages on one sheet. To change the print settings from your software application, access the printer’s Properties. See page 3.2. From the Layout tab, choose Multiple Pages per Side from the Type drop-down list.

• Page 68
  Select the number of pages you want to print per sheet (1, 2, 4, 9 or 16) on the Pages per Side drop-down list. Preview image Select the page order on the Page Order drop-down list, if necessary. Down, Then Right, Then Right Down…

• Page 69: Printing A Reduced Or Enlarged Document

  Document You can scale your print job on a page. When you change the print settings from your software application, access the printer’s Properties. See page 3.2. From the Layout tab, select Reduce/Enlarge on the Type drop-down list. Enter the scaling rate in the Percentage input box.

• Page 70: Fitting Your Document To A Selected Paper Size

  This can be useful when you want to check the fine details on a small document. To change the print settings from your software application, access the printer’s Properties. See page 3.2. From the Layout tab, select Fit to Page on the Type drop- down list.

• Page 71: Printing Posters

  To change the print settings from your software application, access the printer’s Properties. See page 3.2. From the Layout tab, select Poster on the Type drop- down list.

• Page 72: Using Watermarks

  Using an Existing Watermark To change the print settings from your software application, access the printer’s Properties. See page 3.2. Click the Extras tab and select a watermark on the Watermark drop-down list. It appears in the preview image window.

• Page 73: Creating A Watermark

  Creating a Watermark To change the print settings from your software application, access the printer’s Properties. See page 3.2. Click the Extras tab and click Edit in the Watermark section. The Edit Watermarks window appears. Enter text message you want to print in the Watermark Message box.

• Page 74: Editing A Watermark

  Editing a Watermark To change the print settings from your software application, access the printer properties. See page 3.2. Click the Extras tab and click Edit in the Watermark section. The Edit Watermarks window appears. Select the watermark you want to edit on the Current Watermarks list, to change the watermark message and the options.

• Page 75: Using Overlays

  If needed, save the file for later use. To change the print settings from your software application, access the printer’s Properties. See page 3.2. Click the Extras tab and click Edit in the Overlay section. 3.18…

• Page 76
  In the Edit Overlays window, click Create Overlay. In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:Formover). Click Save. The name appears on the Overlay List. Click Ok or Yes to finish creating.

• Page 77: Using A Page Overlay

  To print an overlay with a document: Create or open the document you want to print. To change the print settings from your software application, access the printer’s Properties. See page 3.2. Click the Extras tab. Select the overlay you want to print from the Overlay drop-down list box.

• Page 78: Deleting A Page Overlay

  Deleting a Page Overlay You can delete page overlays that you no longer use. In the printer’s properties window, click the Extras tab. Click Edit in the Overlay section. Select the overlay you want to delete from the Overlay List box.

• Page 79: Setting Up The Locally Shared Printer

  “host computer,” on the network. Your machine can be shared by other users on the network through a Windows 9x, Me, 2000, XP or NT 4.0 network printer connection. connected, you need to install the printer software on each computer that will print documents to the printer.

• Page 80: In Windows Nt 4.0/2000/Xp

  From the Start menu, select Settings and then Printers. Double-click your printer icon. From the Printer menu, select Properties. From the Details tab, select the printer port and click OK. In Windows NT 4.0/2000/XP Setting Up the Host Computer Start Windows.

• Page 81
  For Windows XP, from the Start menu, select Printers and Faxes. Double-click your printer icon. From the Printer menu, select Properties. Press the Ports tab and click Add Port. Select Local Port and click New Port. Fill in the Enter a port name field and enter the shared name.

• Page 82: Chapter 4: Copying

  OPYING This chapter gives you step-by-step instructions for copying documents. This chapter includes: • Loading Paper for Copying • Preparing a Document • Making a Copy • Setting Copy Options • Using Special Copy Features • Changing the Default Settings •…

• Page 83: Loading Paper For Copying

  Loading Paper for Copying The instructions for loading print materials are the same whether you are printing, or copying. For copying, you can use Letter-, A4-sized print materials. For further details, see page 1.8 for loading in the paper tray and page 2.9 for loading in the manual feeder.

• Page 84: Making A Copy

  Making a Copy Lift and open the document cover. Place the document face down on the document glass. Align it with the registration guide on the top left corner of the glass. Close the document cover. Be careful not to move the document.

• Page 85
  OTES • Leaving the cover open while copying may affect the copy quality and toner consumption. • If you are copying a page from a book or magazine which is thicker than 30 mm, start copying with the cover open. Customize the copy settings including number of copies, copy size, darkness and original type by using the control panel buttons.

• Page 86: Setting Copy Options

  Setting Copy Options The buttons on the control panel let you make all the basic copy options; darkness, number of copies, copy size and document type. Set the following options for the current copy job before pressing Start/Enter to make copies. : If you press Stop/Clear while you set the copy options, all of the options you have set for the current copy job will be canceled and return to their default status.

• Page 87: Reduced/Enlarged Copying

  Reduced/Enlarged Copying larger than A4 size and setting an enlargement rate of more than 100%, Text/Photo will be automatically selected. You can reduce or enlarge the size of a copied image from 50% to 200%. To select from the predefined copy sizes: Press Menu/Exit on the control panel.

• Page 88: Original Type

  Original Type The Original Type setting is used to improve the copy quality by selecting the document for the current copy job. To select the document type: Press Menu/Exit on the control panel until «Original Type» appears on the top line of the display Press Start/Enter to access the menu item.

• Page 89: Using Special Copy Features

  Using Special Copy Features larger than A4 size, Text/Photo will be automatically selected. You can use the following copy features using the «Special Copy» menu: • Off: Prints in normal mode. • Clone: Prints multiple image copies from the original document on a single page.

• Page 90: Auto Fit Copying

  Auto Fit Copying : When the size of the document you want to copy is not same as the size of the paper loaded, this function automatically adjusts the size of the document to fit the paper. You can not adjust the copy size manually.

• Page 91: Sided In 1 Page Copying

  2 sided in 1 page Copying You can copy a 2-sided document on one page of A4, or Letter -sized paper. When you copy using this feature, the machine prints one side on the upper half of the paper and the other side on the lower half.

• Page 92: 2-Up Copying

  2-up Copying :2-up lets you copy two original documents on one sheet of paper. The documents are reduced 50 % to allow them to fit on paper the same size as the original documents. You can not adjust the copy size to fit on a different size of paper. Load the document to be copied on the document glass, and close the cover.

• Page 93: Poster Copying

  Poster Copying Load the documents to be copied on the document glass and close the cover. Press Menu/Exit until «Special Copy» appears on the top line of the display. Press the scroll button ( the bottom line. Press Start/Enter to save the selection. Customize the copy settings including number of copies, copy size, darkness and original type by using the control panel buttons.

• Page 94: Changing The Default Settings

  Changing the Default Settings Copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the corresponding buttons on the control panel.

• Page 95: Setting The Time Out Option

  Setting the Time Out Option You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel. Press Menu/Exit on the control panel until «Copy Setup» appears on the top line of the display.

• Page 96: Chapter 5: Scanning

  Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can e- mail the files, display them on your web site or use them to create projects that you can print using Samsung SmarThru software. This chapter includes: •…

• Page 97: Scanning Basics

  Scanning Basics Your machine offers two ways to scan: • From the Samsung SmarThru software: Launch Samsung SmarThru and open the Scan To to begin scanning. See below. • From TWAIN-compliant software: You can use other software including Adobe PhotoDeluxe and Adobe Photoshop. See page 5.6.

• Page 98
  Close the document cover. Once you have installed Samsung SmarThru, you will see the SmarThru 4 icon on your desktop. Double-click the SmarThru 4 icon. Double-click this icon.
• Page 99
  • Image • Copy • Print Click Scan To. The Scan To menu bar appears on the SmarThru 4 window. Scan To lets you use the following services: • Application • Email • Folder CANNING Allows you to edit an image you have saved as a graphic file and send it to a selected application or folder, email it, or publish it on a web site.

• Page 100: To Use On-Line Help File

  • OCR Scanning an image and performing text recognition. Allows you to scan an image, preview it, and send it to the OCR program for text recognition. — Recommended Scan Option for OCR — Resolution: 200 or 300 dpi — Image Type: Mono (Black & White) •…

• Page 101: Scanning Process With Twain-Enabled Software

  Scanning Process with TWAIN- enabled Software If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe PhotoDeluxe or Adobe Photoshop. The first time you scan with your machine, select it as your TWAIN source in the application you use.

• Page 102: Chapter 6: Using Your Printer In Linux

  This chapter gives you information about how to use your machine in the Linux system. This chapter includes: • Getting Started • Installing the MFP Driver • Using the MFP Configurator • Configuring Printer Properties • Printing a Document • Scanning a Document RINTER IN…

• Page 103: Getting Started

  Getting Started The supplied CD-ROM provides you with Samsung’s MFP driver package for using your machine with a Linux computer. Samsung’s MFP driver package contains printer and scanner drivers, providing the ability to print documents and scan images. The package also delivers powerful applications for configuring your machine and further processing of the scanned documents.

• Page 104: Installing The Mfp Driver

  Installing the MFP Driver System Requirements Supported OS Various Linux OS (via USB interface only) • Redhat 7.1 and above • Linux Mandrake 8.0 and above • SuSE 7.1 and above • Caldera OpenLinux 3.1 and above • Turbo Linux 7.0 and above •…

• Page 105: Installing The Mfp Driver

  Click Install. When the welcome screen appears, click Next. SING RINTER IN : You must log in as a super user (root) to install the printer : The installation program runs automatically if you have an INUX icon…

• Page 106
  When the installation is completed, click Finish. The installation program has added the MFP Configurator desktop icon and Samsung MFP group to the system menu for your convenience. If you have any difficulties, consult the on-line help that is available through your system menu or can otherwise be called from the driver package windows applications, such as MFP Configurator or Image Editor.

• Page 107: Uninstalling The Mfp Driver

  Click Uninstall. Click Next. Click Finish. SING RINTER IN : You must log in as a super user (root) to install the printer : The installation program runs automatically if you have an INUX icon…

• Page 108: Using The Mfp Configurator

  Since an MFP device combines the printer and scanner, the MFP Configurator provides options logically grouped for printer and scanner functions. There is also a special MFP port option responsible for the regulation of access to an MFP printer and scanner via a single I/O channel.

• Page 109: Printers Configuration

  Printers Configuration Printers Configuration has the two tabs; Printers and Classes. Printers Tab You can see the current system’s printer configuration by clicking on the printer icon button on the left side of MFP Configurator window. Switches to Printer configuration.

• Page 110: Scanners Configuration

  The Classes tab shows the list of the available printer classes. Shows all of the printer classes. Scanners Configuration In this window, you can monitor activity of scanner devices, view the list of installed Samsung MFP devices, change device properties, and scan images. Switches to Scanners configuration.

• Page 111: Mfp Ports Configuration

  (printer and scanner), it is necessary to organize proper access of “consumer” applications to these devices via the single I/O port. The Samsung MFP driver package provides an appropriate port sharing mechanism that is used by Samsung printer and scanner drivers. The drivers address their devices via so-called MFP ports.

• Page 112: Configuring Printer Properties

  • Classes: shows the class that your printer is in. Click Add to Class to add your printer to a specific class or click Remove from Class to remove the printer from the selected class.

• Page 113: Printing A Document

  From the application you are using, select Print from the File menu. Select Print directly using lpr. In the Samsung LPR window, select the model name of your machine from the Printer list and click Properties. Change the printer and print job properties.

• Page 114: Printing Files

  To abort the current job, click Cancel. Printing Files You can print many different types of files on the Samsung MFP device using the standard CUPS way — directly from the command line interface. The CUPS lpr utility allows you do that.

• Page 115: Scanning A Document

  Scanning a Document You can scan a document using the MFP Configurator window. Double-click the MFP Configurator on your desktop. Click the Select the scanner on the list. When you have only one MFP device and it is connected to the computer and turned on, your scanner appears on the list and is automatically selected.

• Page 116
  Load the document to be scanned face down on the document glass. Click Preview in the Scanner Properties window. The document is scanned and the image preview appears in the Preview Pane Drag the pointer to set the image area to be scanned.
• Page 117
  Change the scan options in the Image Quality and Scan Area sections. • Image Quality: allows you to select the color • Scan Area: allows you to select the page size. The If you want to use one of the preset scan option settings, select from the Job Type drop-down list.
• Page 118
  Using Preset Job Type Settings You can save your scan option settings to retrieve for a later scanning. To save a new Job Type setting: Change the options from the Scanner Properties window. Click Save As. Enter the name for your setting. Click OK.

• Page 119: Using The Image Editor

  Using the Image Editor The Image Editor window provides you with menu commands and tools to edit your scanned image. You can use the following tools to edit the image: Tools 6.18 SING RINTER IN Use these tools to edit the image. Saves the image.

• Page 120
  Tools Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically or horizontally. Allows you to rotate the image; you can select the number of degrees from the drop-down list. Allows you to flip the image vertically or horizontally.
• Page 121
  6.20 SING RINTER IN INUX…

• Page 122: Chapter 7: Maintenance

  AINTENANCE This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Printing the System Data List • Clearing the Memory • Cleaning Your Machine • Maintaining the Toner Cartridge • Consumables and Replacement Parts •…

• Page 123: Printing The System Data List

  Printing the System Data List Your machine can print the system data report shows the status of the user-selectable options. You may print this list to confirm your changes after changing any settings. To print the system data list: Press Menu/Exit until «Report» appears on the top line of the display.

• Page 124: Cleaning Your Machine

  Cleaning Your Machine To maintain print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print quality problems occur. OTES • While cleaning the inside of the machine, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from your fingers can cause print quality problems.

• Page 125
  With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity. AUTION it to light for more than a few minutes. Cover it with a piece of paper, if necessary. Do not touch the black transfer roller inside the machine. Locate the long strip of glass (LSU) inside the top of the cartridge compartment, and gently swab the glass to see if dirt turns the white cotton black.

• Page 126: Cleaning The Document Glass

  Cleaning the Document Glass Keeping the document glass clean helps ensure the best possible copies. We suggest that you clean the document glass at the start of each day and during the day, as needed. Slightly dampen a soft lint-free cloth or paper towel with water.

• Page 127: Maintaining The Toner Cartridge

  Maintaining the Toner Cartridge Toner Cartridge Storage To get the most from the toner cartridge, keep the following guidelines in mind: • Do not remove the toner cartridge from its package until ready for use. • Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge.

• Page 128: Redistributing Toner

  Redistributing Toner When the toner cartridge is near the end of its life, white streaks or light print occurs. You can temporarily re-establish the print quality by redistributing the remaining toner in the cartridge. Open the front cover. Pull the toner cartridge out and gently roll the cartridge 5 or 6 times to distribute the toner evenly inside the cartridge.

• Page 129: Replacing The Toner Cartridge

  Replacing the Toner Cartridge When the toner eventually runs out, only blank pages print when a print job is sent. At this stage, the toner cartridge needs to be replaced. The machine stops printing. Open the front cover. Lightly pushing the used cartridge down, pull it out. Unpack the new toner cartridge and gently roll it horizontally four or five times to distribute the toner evenly inside the cartridge.

• Page 130: Cleaning The Drum

  Transfer roller Fuser unit To purchase consumables and replacement parts, contact your Samsung dealer or the retailer where you bought your machine. We strongly recommend that items be installed by trained service professional, except for the toner cartridge. Yield (Average) Approx.

• Page 131: Using The Remote Control Panel

  Using the Remote Control Panel, you can update the firmware program of your machine on the desktop of your computer. When you install the Samsung Software, the Remote Control Panel program is automatically installed. To open the Remote Control Panel: Start Windows.

• Page 132: Chapter 8: Troubleshooting

  ROUBLESHOOTING This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Clearing Paper Jams • Clearing LCD Error Messages • Solving Problems…

• Page 133: Clearing Paper Jams

  Clearing Paper Jams When a paper jam occurs, «Paper Jam» appears on the display. Refer to the table below to locate and clear the paper jam. Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside To avoid tearing the paper, pull the jammed paper out gently and slowly.

• Page 134: In The Paper Exit Area

  Insert the paper tray into the machine until it snaps into place. Open and close the front cover to resume printing. In the Paper Exit Area Open and close the front cover. The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. Gently pull the paper out of the front output tray.

• Page 135
  Close the jam cover by pushing a tab to the left and hold it down and lowering the cover carefully until the cover is holding down the tab. If there is any resistance and the paper does not move when you pull or if you cannot see the paper in the jam cover, continue to step 6.

• Page 136: In The Fuser Area Or Around The Toner Cartridge

  In the Fuser Area or Around the Toner Cartridge : The fuser area is hot. Take care when removing paper from the machine. Open the front cover and pull the toner cartridge out, lightly pushing it down. Remove the jammed paper by gently pulling it straight out. Replace the toner cartridge and close the front cover.

• Page 137: In The Manual Feeder

  In the Manual Feeder “ Paper Jam 1 Open/Close Door ” appears on the display when you try to print using the manual feeder and the machine does not detect paper, due to no paper or improper paper loading. The error message may also occur when the paper is not properly fed into the machine through the manual feeder.

• Page 138
  — Load the paper into the tray as shown below. — Open the Samsung SCX-4100 Series Properties window, set the paper size to A5(5.8×8.3 in.) from the Paper tab. — From the Orientation option of the Layout tab, set the Rotate option to 90º.

• Page 139: Clearing Lcd Error Messages

  Clearing LCD Error Messages Messages appears on the display to indicate the control panel to indicate the machine’s status or errors. Refer to the following table to understand the message’s meaning and correct the problem, if necessary. Messages and their meanings are listed in alphabetical order.

• Page 140: Solving Problems

  • There may be debris inside the machine. Open the front Transparencies stick Use only the transparencies specifically designed for a laser together in the paper printer. Remove each transparency as it exits from the exit. machine. Envelopes skew or fail Ensure that the paper guides are against both sides of the to feed correctly.

• Page 141: Printing Problems

  ROUBLESHOOTING Suggested solutions Check the power cord connections. Check the power switch and the power source. Select Samsung SCX-4100 Series as your default printer in your Windows. After locating the problem, clear it. • Close the cover. • Clear the paper jam. See page 8.2.

• Page 142
  15 PPM for Letter-sized paper 14 PPM for A4-sized paper. From the Start menu, choose Settings and Printers. Right-click the Samsung SCX-4100 Series printer icon, choose Properties, click the Details tab, and then choose the Spool Settings button.
• Page 143
  Condition Possible cause Pages print, The toner cartridge is but are blank. defective or out of toner. The file may have blank pages. Some parts, such as the controller or the board, may be defective. The setting in the illustrations software application is print wrong.

• Page 144: Printing Quality Problems

  Printing Quality Problems If the inside of the printer is dirty, or paper is improperly loaded, print quality maybe reduced. See the table below to clear the problem. Condition Light or faded If a vertical white streak or faded area appears on the page: print •…

• Page 145
  Condition Vertical lines Gray background Toner smear Vertical repetitive defects 8.14 ROUBLESHOOTING Suggested solutions If black vertical streaks appear on the page: • The drum inside the toner cartridge has probably been scratched. Remove the toner cartridge and install a new one. See “Replacing the Toner Cartridge”…
• Page 146
  • If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties. Miss-formed • If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different characters paper.
• Page 147
  Condition Wrinkles or creases Back of printouts are dirty Black pages Loose toner 8.16 ROUBLESHOOTING Suggested solutions • Ensure that the paper is loaded properly. • Check the paper type and quality. See “Paper Specifications” on page A.5. • Turn the stack of paper over in the paper tray. Also try rotating the paper 180°…
• Page 148
  Contact a service representative. Curl If the printed paper is curl or paper does not feed into the printer: • Turn the stack of paper over in the paper tray. Also try rotating the paper 180° in the paper tray.

• Page 149: Copying Problems

  Copying Problems Condition Copies are too light or too dark. Smears, lines, marks or spots appears on copies. Copy image is skewed. Blank copies print out. Image rubs off the copy easily. Frequent copy paper jams occurs. Fewer copies from the toner cartridge than expected prints out.

• Page 150: Scanning Problems

  • The selected port is currently being used. Restart your computer and try again. • The printer cable may be improperly connected or the power may be off. You must use a USB 1.1 compliant cable or a parallel cable that supports IEEE-1284 bi- directional communications.

• Page 151: Common Linux Problems

  8.20 ROUBLESHOOTING Possible Cause and Solution • Check if the printer driver is installed in your system. Open MFP configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list.

• Page 152
  • Check if your machine is connected to the computer. • Check if MFP port is not busy. Since functional Possible Cause and Solution components of MFP (printer and scanner) share the same I/O interface (MFP port), the situation of simultaneous access of different «consumer» application to the same MFP port is possible.
• Page 153
  8.22 ROUBLESHOOTING Possible Cause and Solution • Since both Linux Printer Package and MFP driver make a symbolic link to «lpr» printing command, which is commonly used on Unix clones, it is not recommended to use both package on the same machine.

• Page 154: Appendix A: Specifications

  PECIFICATIONS This chapter includes: • General Specifications • Scanner and Copier Specifications • Printer Specifications • Paper Specifications…

• Page 155: General Specifications

  General Specifications Item Paper input capacity Paper output capacity Paper type Power requirements Power consumption Noise Warm-up Time Operating conditions Duty Cycle Consumables Toner cartridge life SET dimension (W x D x H) Weight Package Weight Description Paper tray: 250 sheets (weight: 75 g/m Manual feeder: 1 sheet (weight: 75 g/m Front output tray: 50 sheets (face down) Rear output slot: 1 sheet (face up)

• Page 156: Scanner And Copier Specifications

  Item Interface • OS Compatibility • Sound Pressure Level, ISO7779. ** May be affected by operating environment, printing interval, media type, media size and color/black. *** Please visit www.samsungprinter.com to download the latest software version. Scanner and Copier Specifications Item Compatibility Scan method Scan resolution…

• Page 157: Printer Specifications

  Envelope C6, Envelope Monarch, Envelope B5 * Min.: 76 x 127 mm (3 x 5 in.) Max.: 216 x 356 mm (8.5 x 14 in.) 600 x 600 dpi SPL (Samsung Printer Language) 8MB (Max. 8MB) Standby mode: 12 seconds…

• Page 158: Paper Specifications

  • Before purchasing large quantities of paper, insure the paper meets the requirements specified in this user’s guide. : Using paper that does not meet these specifications may cause problems, AUTION requiring repairs. These repairs are not covered by the Samsung warranty or service agreements.

• Page 159: Supported Sizes Of Paper

  Supported Sizes of Paper Size (mm/in.) Plain paper Letter (216 x 279/8.5 x 11) Legal (216 x 356/8.5 x 14) Executive (184 x 267/7.2 x 10.5) A4 (210 x 297/8.3 x 11.7) A5 (148 x 210/5.8 x 8.3) A6 (105 x 148/4.1 x 5.8) Folio (216 x 330/8.5 x 13) Envelopes JIS B5 (182 x 257/7.2 x 10.1)

• Page 160: Guidelines For Using Paper

  Guidelines for Using Paper For the best result, use conventional 75 g/m of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

• Page 161: Paper Specifications

  Paper Specifications Category Acid Content Caliper Curl in Ream Cut Edge Conditions Fusing Compatibility Grain Moisture Content Smoothness Paper Output Capacity Output Location Face-down output tray Face-up output slot Specifications 5.5 pH or lower 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils) Flat within 5 mm (0.02 in.) Cut with sharp blades with no visible fray.

• Page 162: Paper Storage Environment

  Paper Storage Environment Paper storage environment conditions directly affect the feed operation. Ideally, the machine and paper storage environment should be at or near room temperature, and not too dry or humid. Remember that paper is hygroscopic; it absorbs and loses moisture rapidly. Heat works with humidity to damage paper.

• Page 163: Envelopes

  Envelopes Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components: Weight: The weight of the envelope paper should not exceed 90g/m •…

• Page 164: Envelopes With Adhesive Strips Or Flaps

  Envelopes with Adhesive Strips or Flaps Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the heat and pressure in the machine. The extra flaps and strips might cause wrinkling, creasing or even jams and may even damage the fuser.

• Page 165: Labels

  Labels AUTIONS • To avoid damaging the machine, use only labels recommended for laser printers. • To prevent serious jams, always use the manual feeder to print labels and always use the rear output tray. • Never print on the same sheet of labels more than once and never print on a partial sheet of labels.

• Page 166
  NDEX Numerics 2-side, special copy 4.10 2-up, special copy 4.11 auto fit, special copy 4.9 canceling copy 4.4 print 3.5 scan 5.5 cleaning document glass 7.5 drum 7.9 inside 7.3 outside 7.3 clone, special copy 4.8 connect parallel cable 1.11 USB cable 1.11 connection AC power 1.13…
• Page 167
  7.2 MFP driver, install Linux 6.4 network printer, set 3.22 n-up (multiple pages per sheet) copy 4.11 orientation, print 3.3 6.13 output location, select 2.4 overlay, use 3.18 paper guidelines 2.3 paper jam, clear 8.2 paper load in manual feeder 2.9 in paper tray 1.8…
• Page 168
  uninstalling MFP driver Linux 1.23 Windows Remote Control Panel 1.23 SmarThru 1.24 mode, change 8.12 watermarks, use 3.15…
• Page 169
  Visit us at: www.samsungprinter.com Rev.3.00…