operation make sure to have it sufficiently grounded.
1.11 There are a big number of connection wires distributed around the screen. Please take care not to
touch or scuff them during maintenance or removing the screen, because once they are damaged the
screen will fail to work and it’s not possible to repair it.
1.12 Connector for the circuit board of the screen part is relatively fine and delicate. Please take care in
the replacement operation lest it should get damaged.
1.13 Special care must be taken during transportation and handling because strenuous vibration could
lead to screen glass breakage or damage on the driving circuitry. Be sure to use a strong outer case to
pack it up before transportation or handling.
1.14 Please put it for storage in an environment in which the conditions are under control so as to
prevent the temperature and humidity from exceeding the scope stipulated in the specification. For
prolonged storage please cover it with anti-moisture bag and have them piled and stored in one place.
The environmental conditions are tabulated as below:
Temperature
Humidity
1.15 If a fixed picture is displayed for a long time, difference in its brightness and color may occur
compared with movable pictures. But it doesn’t show any problem and the reason is that there is
reduced density of fluorescent powder in the former. On the other hand, even if changes take place in
the picture, it can keep its brightness for a period of time (several minutes). It’s a feature inherent with
plasma and it’s not abnormal. However please try as much as possible to avoid showing a still picture of
high brightness for a long time during operation.
1.16 As a digitalized display devise, this module is provided with error diffusion technology and the gray
scale and false enhancement of contour can be displayed by reusing of sub-field. As compared with
cathode ray tube, it can be found in the moving picture that at the brim of the face of a person there are
some wrong colors.
1.17 During the display of graph (indicating the gradual change in brightness horizontally or vertically)
resulting from gray scale test it can be found that the brightness for the two adjacent levels is uneven.
This is caused by the reuse of sub-field, the display of load rectification and the electrolysis.
1.18 The screen front plate is of glass. Please make sure that the screen has been put in place during
erection. If it is not in place before the erection begins it may lead to screen crack or breakage.
1.19 Make sure the screw used in the mounting of the screen is of the original specs lest it should cause
damage to the screen due to mismatch. Special care should be taken not to use too long or too big
screw.
1.20 Care must be taken to guard against dust during assembling or dismantling, especially to avoid dirt
from falling in between the screen and the glass lest it should harm the receiving and viewing effect.
1.21 There is piece of insulator stuck on the rear chassis corresponding to the power supply board. It is
used to isolate the cool part from the hot part. Please take care to keep it intact lest it should become a
potential safety trouble.
1.22 In addition to plasma screen, the glass is a part of high value. It has such functions as anti-radiation,
adjustment of color temperature etc. Please handle it carefully.
Scope for operation
Scope for storage
Scope for operation
Scope for storage
2
0~50centigrade
-15~60centigrade
20%~80%
20%~80%
Посмотреть инструкция для Sanyo PDP-42WV1 бесплатно. Руководство относится к категории мониторы, 3 человек(а) дали ему среднюю оценку 8.8. Руководство доступно на следующих языках: английский. У вас есть вопрос о Sanyo PDP-42WV1 или вам нужна помощь? Задайте свой вопрос здесь
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Sanyo PDP-42WV1.
Каковы размеры экрана монитор?
Инструкция Sanyo PDP-42WV1 доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
|
Detail Specifications: 1104/1104333-pdp42xs1.pdf file (09 Feb 2023) |
Accompanying Data:
Sanyo PDP-42XS1 Plasma TV, TV PDF Service Manual (Updated: Thursday 9th of February 2023 08:21:11 PM)
Rating: 4.6 (rated by 9 users)
Compatible devices: CP29SV2Z, CPP2940TX, AVM-2550S, AVM-2759S, CP21EF2, C25ZG56, XT-49S8200U, C29ZK80TX, C21ZM40.
Recommended Documentation:
Text Version of Service Manual
(Ocr-Read Summary of Contents, UPD: 09 February 2023)
-
11, 9 Method of software upgrading 1. Enter the software upgrading state of the TV Method 1: press the VOL- button in the unit, turn on the main power switch, then the screen display black screen, but the indicator to blue. Method 2: Enter factory menu, select the IIC-BUS OFF item. 2. Connection upgrading tools with upgrading port. 3. Dual- click IAPWriter logo, enter the upgradin…
-
20, 18 COF and logic BUFFER has problem. If no problem, check if the connection sockets between the logic BUFFER and the logic board is normal. If it’s normal, then replace the logic BUFFER. If the problem still remains after the replacement, then replace the logic board. Finally if the problem is still there, then the problem lies with COF. 6.There appear on the screen abnormal bright spots or…
-
23, Sanyo PDP-42XS1 21 Trouble shooting guide 1.No raster, no picture, no sound NOTICE: The PDP power supply have the protection function of overcurrent, overvoltage and so on, if certain route power supply appear overcurrent and overvoltage, the power supply should appear the protection to arise no-output. Check if the power supply indicator light is on. Check 5V-STBY Cut o…
-
3, 1 Safety Precautions Please read the “Points for attention for the Maintenance & Repair of PDP” and “Criterion for Identifying the Defects on Screen” as below, before inspecting and adjusting the TV set. 1. “Points for attention for the Maintenance & Repair of PDP” To avoid possible danger, damage or jeopardy to health and to prevent PDP screen fro…
-
6, 4 3.4 EEPROM initialization Enter page one of the factory menu, select the EEPROM INITIALIZE to ON. 3.5 White balance adjustment The eight level gray-scale signal of FLUKE PW5148 video generator sends to AV channel, enter the factory menu white balance adjustment page. Select the standard color temperature item, fixed the R GAIN to be 32H, adjust the seventh c…
-
21, 19 Wiring Diagram 4 12 6 10 4 2 7 9 31 4 4 PDP42V7 LG screen 667-PS42W6-69 Data processing board X902(7PIN) X901(9PIN) X301(31PIN) YPbPr Audio L/R V…
-
26, 24 4.2 no picture on S-terminal 4.3 NO picture of TV channel 4.3.1 mainframe Check if the C228 and C229 have the signal input. Check if the pin 2 o f N 708 has in p ut si g nal. Check periphery circuit of N201, crystal and power supply Check the periphery circuit of N708 and p ower su pp l y Check the S-terminal socket to N708 channel Yes …
Recommended Instructions:
DOUBLE EDGED DEHT19, U7, L-175, FIMB 51 K.A
-
ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2004 PDP-434CMX ARP3198 PLASMA DISP …
434CMX — PDP — 43″ Plasma Panel 153
-
Plasma TVuser manualThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________Serial No. _____________E-MANUAL© 2012 Samsung Electronics Co., Ltd. All rights reserved.BN68-04579FBN68-04579F-01Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung pr …
PS43E450A1W 49
-
1Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.LCD TV PLASMA TVOWNER’S MANUALLCD TV MODEL42LG70ERPLASMA TV MODELS42PG30TR50PG30TRP/NO : MFL42054501 (0808-REV02)Pr …
42LG70ER 120
-
© 2010 Samsung Electronics Co., Ltd. All rights reserved.BN68-02901A-01Plasma TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to …
PS50C6500 53
Popular Right Now:
Operating Impressions, Questions and Answers:
Table of Contents for Sanyo PDP-42XS1:
-
18 COF and logic BUFFER has problem. If no problem, check if the connection sockets between the logic BUFFER and the logic board is normal. If it’s normal, then replace the logic BUFFER. If the problem still remains after the replacement, then replace the logic board. Finally if the problem is still there, then the problem lies with COF. 6.There appear on the screen abnormal bright spots or blocks that are different from what’s described above: a. Check if the connection socket between COF and logic BUFFER board has been well plugged. b. Replace the l
-
14 Descriptions of the pins: 2, 3: SCL, SDA, control the IC working 27, 28: Output to the right and left sound channel of sound power amplifier 33, 34: the right and left sound channel of earphone 36, 37: the right and left sound channel of AV OUT sound 47, 48: the left and right sound channel from main board 50, 51: the left and right sound channel of AV IN sound channel 53, 54: the left and right tracks of the TV sub- channel 56, 57: the left and r
-
16 Diagnose and service of panel 1. Block function of panel The power supply board, Logic board, X drive board, Y drive board, Logic BUFFER (E and F) and Y BUFFER (upper and lower) of the PDP panel. * Power supply board: to supply power for the screen, other functional modules on the screen, our own main board, and video frequency processing board. * X driving board: to produce and provide driving signal for X electrode according to the time sequence signal sent from logic board. * Y driving board:
-
4 3.4 EEPROM initialization Enter page one of the factory menu, select the EEPROM INITIALIZE to ON. 3.5 White balance adjustment The eight level gray-scale signal of FLUKE PW5148 video generator sends to AV channel, enter the factory menu white balance adjustment page. Select the standard color temperature item, fixed the R GAIN to be 32H, adjust the seventh color coordinate (284, 299) of B, G GIAN; fixed the R OFFSET to be 32H, adjust the second color coordinate (284,299) of B, G OFFSET. Note: adjust white
-
1 Safety Precautions Please read the “Points for attention for the Maintenance & Repair of PDP” and “Criterion for Identifying the Defects on Screen” as below, before inspecting and adjusting the TV set. 1. “Points for attention for the Maintenance & Repair of PDP” To avoid possible danger, damage or jeopardy to health and to prevent PDP screen from new damage, the maintenance people must read the
-
19 Wiring Diagram 4 12 6 10 4 2 7 9 31 4 4 PDP42V7 LG screen 667-PS42W6-69 Data processing board X902(7PIN) X901(9PIN) X301(31PIN) YPbPr Audio L/R VGA Earphone in p u t HDMI Power supply switch assy speaker Button board Lo g ic circuit board P1 Power
-
9 Method of software upgrading 1. Enter the software upgrading state of the TV Method 1: press the VOL- button in the unit, turn on the main power switch, then the screen display black screen, but the indicator to blue. Method 2: Enter factory menu, select the IIC-BUS OFF item. 2. Connection upgrading tools with upgrading port. 3. Dual- click IAPWriter logo, enter the upgrading states (if the PC and the IIC communication trouble, it can prompt. 4. Select the file menu load the software foll
-
10 5. Select WRITE DEVICE item of the device menu, till the right screen display “DONE”. 6. turn off the power , restart the unit. Note: because of the software, it may be no-stabilization, the software can auto download and write. Connection cable Upgrading tools
-
27 4.7 No picture of YPBPR or YCBCR 4.8 No of picture of D-SUB channel Check if the pin4, pin7 and pin9 of N706 have si g nal in p ut Check if the C220, C221 and C222 have the signal input Check the peripheral circuit of N201, crystal and p ower su pp l y Check if the pin2, pin5 an d p in11 of N706 have signal in p ut Check between N706 and N201 channel Between the YPBP R socket and N706 channel has p roble m Check the peripheral circuit of N706 an d p ower su pp l y N o Yes Yes N o N o Yes Chec
-
24 4.2 no picture on S-terminal 4.3 NO picture of TV channel 4.3.1 mainframe Check if the C228 and C229 have the signal input. Check if the pin 2 o f N 708 has in p ut si g nal. Check periphery circuit of N201, crystal and power supply Check the periphery circuit of N708 and p ower su pp l y Check the S-terminal socket to N708 channel Yes N o Yes N o Check if the C227 have the signal input. Check if the pin 2 o
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Sanyo PDP-42XS1 device using right now.