Smartpack eltek руководство

1 Welcome

Information in this document is subject to change without notice and does not represent

a commitment on the part of Eltek Energy.

No part of this document may be reproduced or transmitted in any form or by any means

— electronic or mechanical, including photocopying and recording — for any purpose

without the explicit written permission of Eltek Energy.

Safety Precautions

The equipment described in this manual must only be operated by

Eltek Energy personnel or by persons who have attended a suitable

Eltek Energy training course

The equipment represents an energy hazard and failure to observe this

could cause terminal injury and invalidate our warranty

There are hazardous voltages inside the power system. As the modules

incorporate large charged capacitors, it is dangerous to work inside the

system even if the mains supply is disconnected

Products into which our components are incorporated have to comply with a

number of requirements. Installation is to be in accordance with the

recommendations herein

Please read the manual carefully before using the equipment

350003.013

Issue 5, 2006 Nov

Published 2006-11-25

Mfm

2

Copyright ©: Eltek Energy, Norway 2006

User’s Guide Smartpack Monitoring & Ctrl Unit,

Certificate no: 900005Q

Certificate no: 900005E

350003.013, v5-2006-11

• 21, 5 Technical Specifications User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 21 5. Technical Specifications Remote Monitoring / Control From a PC running Windows-based communication software (PowerSuite) With the Windows-based communication program installed on a remote computer, the system can be …

• 19, 4 Front Panel Operation User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 19 User Options UO When you “enter” Menu Mode, you access the User Options. For description of the User menu options, read chapter “Functionality Description” page 22. Also, refer to the PowerSuite on…

• 14, 2 The Smartpack Controller 14 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 Smartpack Controller ⎯ RS232 The Smartpack controllers – in RS232 option, Art 242100.111 (front access) and Art 242100.112 (rear access) – allow remote system monitoring and control by connecting to the RS232 port either a modem or Eltek’s stand-alone WebPower u…

• 12, 2 The Smartpack Controller 12 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 Firmware Upgrade of the Smartpack controller You can use the FWLoader program 2 running on a PC to upgrade the Smartpack controller’s firmware. To find your controller’s firmware version, refer to page 23. The PowerSuite program has to be installed previously…

• 18, Eltek Smartpack 4 Front Panel Operation 18 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 Modes of Operation The controller’s display is either in Status Mode or in Menu Mode. Status Mode When the front keys are not in operation, the display is in Status Mode. The following information is then scrolled through the display: • The upper line continuously displ…

• 10, 2 The Smartpack Controller 10 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 CAN Port Signals ⎯ Internal Connections CAN port 1 and 2 are electrically identical, and are used to enable connection of the CAN bus incoming and outgoing CAT5 cables. A special RJ45 plug with built-in 120Ω end-of- line resistor can be connect…

• 20, 4 Front Panel Operation 20 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 Service Options SO When you enter Menu Mode, you access the User Options. You may then scroll down to the password protected Service Options. The Service Option’s password is factory-programmed to <0003>. We strongly recommend that this password is changed as soon …

• 27, Eltek Smartpack 6 Functionality Description User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 27 Battery Symmetry Measurements ⎯ 48V Systems Symmetry measurement is a battery monitoring method for automatically detecting unbalanced battery blocks. For information about 24V systems symmetry measurements, read the “Quick Start Guide Flatp…

• 22, 6 Functionality Description 22 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 6. Functionality Description In this chapter you can find helpful and more detailed descriptions of expressions, technical terms, functions, etc. used in Smartpack-based DC power systems. Alarm Reset UO (AlarmReset) You can reset all active alarms by selecting “Use…

• 2, Eltek Smartpack 1 Welcome 2 User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 Information in this document is subject to change without notice and does not represent a commitment on the part of Eltek Energy. No part of this document may be reproduced or transmitted in any form or by any means — electronic or mechanical, including photocopying and recording — for any purpo…

• 11, Eltek Smartpack 2 The Smartpack Controller User’s Guide Smartpack Monitoring & Ctrl Unit, 350003.013, v5-2006-11 11 Software Assignment ⎯ Rectifiers Each rectifier in the Smartpack-based DC power system is automatically configured by the Smartpack controller with a unique CAN bus ID number (software-assignment). When the rectifiers are hot-plugged in the p…

• For Power Supply Models:600N, 2200N-A, 2200N-B, 12KN-A, 12KN-B, 12KN -C, 12KN-DPOWER SUPPLYINSTALLATION & ADJUSTMENTINSTRUCTIONSUse Exclusively with FLATLITE® ElectroluminescentLamps.! IMPORTANT SAFEGUARDS !When using electrical equipment, basic safety precautions should always be followed including the following:• This product must be installed and serviced b …

  600N 4

• User’s Guide Rectifiers and Supervision FlatpackS DC Power Supply Systems Anatel Homolgation Numbers Rectifier 0863-15-2298 Power System 0864-15-2298 FlatpackS Modules …

  FlatpackS 48/1800 HE 19

• Il modulo alimentatore caricabatteria IPS24140 è stato sviluppato secondo i criteri di qualità, affidabilità e prestazioni adottati dalla INIM Electronics. I compo-nenti utilizzati garantiscono idonei requisiti di funzionamento quando le condizioni am-bientali esterne al modulo sono in accordo con la categoria 3k5 della IEC 721-3-3.Il modulo di alimentazi …

  IPS24140 4

• SVM103-ADecember 1995Safety Depends on YouLincoln arc welding and cuttingequipment is designed andbuilt with safety in mind.However, your overall safetycan be increased by properinstallation . . . and thoughtfuloperation on your part. DONOT INSTALL, OPERATE ORREPAIR THIS EQUIPMENTWITHOUT READING THISMANUAL AND THE SAFETYPRECAUTIONS CONTAINEDTHROUGHOUT. And, mostimportantly …

  POWER-ARC 4000 SVM103-A 80