Sony cdx gt300ee инструкция на русском

В чем разница между FM и AM?

Когда звук считается слишком громким?

Автомобильный радиоприемник не включается, что делать?

Как лучше всего выполнять чистку автомагнитола?

Инструкция Sony CDX-GT300EE доступно в русский?

Инструкция и руководство для
Sony CDX-GT300EE на русском на английском

36 страниц подробных инструкций и пользовательских руководств по эксплуатации

2-653-153-43 (1)

Operating Instructions

Инструкция по эксплуатации

CDX-GT300EE

To cancel the demonstration (DEMO) display, see page 10.
Для отмены демонстрации на дисплее (режим DEMO) см. стр. 11.

© 2005 Sony Corporation

GB

RU

FM/AM
Compact Disc Player

2

Welcome !

Thank you for purchasing this Sony Compact
Disc Player. You can enjoy your drive with the
following functions.
• CD playback

You can play CD-DA (also containing CD
TEXT*), CD-R/CD-RW (MP3/WMA files also
containing Multi Session (page 12)) and
ATRAC CD (ATRAC3 and ATRAC3plus
format (page 13)).

• Radio reception

– You can store up to 6 stations per band (FM1,

FM2, FM3, AM1 and AM2).

– BTM (Best Tuning Memory): the unit selects

strong signal stations and stores them.

• Sound adjustment

– EQ3 stage2: You can choose any one of 7

preset equalizer curves.

– DSO (Dynamic Soundstage Organizer):

creates a more ambient sound field, using
virtual speaker synthesis, to enhance the
sound of speakers, even if they are installed
low in the door.

– BBE MP: improves digitally compressed

sound such as MP3.

• Optional unit operation

You can also control optional CD/MD
changers.

• Auxiliary equipment connection

An AUX input jack on the front of the unit
allows connection of a portable audio device.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

Type of discs

Label on the disc

CD-DA

MP3

WMA

ATRAC CD

For installation and connections, see the
supplied installation/connections manual.

Warning if your car’s ignition has no
ACC position
After turning the ignition off, be sure to press
and hold

(OFF) on the unit until the display

disappears.
Otherwise, the display does not turn off and
this causes battery drain.

This label is located on the bottom of the
chassis.

Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please contact
your local Civic Office, your household waste disposal
service or the shop where you purchased the product.

Applicable accessory: Remote commander

Table of Contents Getting Started Resetting the unit…

Страница 3

• Изображение
• Текст

Getting started, Resetting the unit, Setting the clock

Detaching the front panel, Getting started resetting the unit

• Изображение
• Текст

4

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ballpoint
pen.

Note
Pressing the RESET button will erase the clock setting
and some stored contents.

Setting the clock

The clock uses a 24-hour digital indication.

1

Press and hold the select button.
The setup display appears.

2

Press the select button repeatedly
until “CLOCK-ADJ” appears.

3

Press (DSPL).
The hour indication flashes.

4

Rotate the volume control dial to set
the hour and minute.
To move the digital indication, press (DSPL).

5

Press the select button.
The setup is complete and the clock starts.

To display the clock, press (DSPL). Press
(DSPL) again to return to the previous display.

With the card remote commander
In step 4, to set the hour and minute, press

M or m.

Detaching the front panel

You can detach the front panel of this unit to
prevent theft.

Caution alarm

If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.

1

Press (OFF).
The unit is turned off.

2

Press (OPEN).
The front panel is flipped down.

3

Slide the front panel to the right, then
gently pull out the left end of the front
panel.

Notes
• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.

RESET
button

1

2

Attaching the front panel, Inserting the disc in the unit, Ejecting the disc

Страница 5

• Изображение
• Текст

5

Attaching the front panel

Place the hole A of the front panel onto the
spindle B on the unit, then lightly push the left
side in.
Press (SOURCE) on the unit (or insert a disc) to
operate the unit.

Note
Do not put anything on the inner surface of the front
panel.

Inserting the disc in the unit

1

Press (OPEN).

2

Insert the disc (label side up).

3

Close the front panel.
Playback starts automatically.

Ejecting the disc

1

Press (OPEN).

2

Press Z.
The disc is ejected.

3

Close the front panel.

A

B

x

Location of controls and basic operations, Main unit, Card remote commander rm-x151

Main unit card remote commander rm-x151, Ql w; qk, Qs wf qd 1 qf wa q; wd ws wh wg

• Изображение
• Текст

6

Location of controls and basic operations

Main unit

Front panel removed

Card remote commander
RM-X151

Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.

A OFF button

To power off; stop the source.

B Volume control dial/select button 9

To adjust volume (rotate); select setup items
(press and rotate).

C Receptor for the card remote

commander

D BTM button 8

To start the BTM function (press and hold).

E Display window

F DSO button 2

To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.

G OPEN button 5

CDX-GT300EE

RESET

ql

w;

qk

OFF

DSPL

SCRL

SEL

SOURCE

MODE

1

3

2

4

6

5

ATT

VOL

+

–

+

–

qs

wf

qd

1

qf

wa

q;

wd

ws

wh

wg

7

H GP*

1

/ALBM*

2

+/– buttons*

3

To skip groups/albums (press); skip groups/
albums continuously (press and hold).

I SEEK –/+ buttons

CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).

J DSPL (display) button 8

To change display items.

K SENS button

To improve weak reception: LOCAL/
MONO.

L SOURCE button

To power on; change the source (Radio/CD/
MD*

4

/AUX).

M MODE button 8, 10

To select the radio band (FM/AM)/select the
unit*

5

.

N SCRL (scroll) button 8

To scroll the display item.

O Number buttons

CD/MD*

4

:

(3): REP 8
(4): SHUF 8
(5): BBE MP*

6

3

To activate the BBE MP function, set
“BBEMP-ON.” To cancel, set
“BBEMP-OFF.”

(6): PAUSE*

6

To pause playback. To cancel, press
again.

Radio:
To receive stored stations (press); store
stations (press and hold).

P EQ3 (equalizer) button 9

To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).

Q AUX input jack 10

To connect a portable audio device.

R RESET button 4

S Z (eject) button 5

To eject the disc.

T Disc slot 5

To insert the disc.

The following buttons on the card remote
commander have also different buttons/functions
from the unit.

wa < (.)/, (>) buttons

To control CD/radio, the same as (SEEK)
–/+ on the unit.

ws VOL (volume) +/– button

To adjust volume.

wd ATT (attenuate) button

To attenuate the sound. To cancel, press
again.

wf SEL (select) button

The same as the select button on the unit.

wg M (+)/m (–) buttons

To control CD, the same as
(GP/ALBM) +/– on the unit.

wh Number buttons

To receive stored stations (press); store
stations (press and hold).

*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is

different, see page 10.

*4 When an MD changer is connected.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.

Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.

Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.

Display items, Repeat and shuffle play, Radio

Storing and receiving stations, Storing automatically — btm, Storing manually, Receiving the stored stations, Tuning automatically, Display items repeat and shuffle play, Ep 8

• Изображение
• Текст

8

CD

For details on selecting a CD/MD changer, see
page 10.

Display items

A

ATRAC CD indication

B

Source

C

WMA/MP3/BBE MP indication

D

Track number/Elapsed playing time, Disc/
artist name, Album/group number*

1

, Album/

group name, Track name, Text information*

2

,

Clock

*1 Album/group number is displayed only when the

album/group is changed.

*2 When playing an MP3, ID3 tag is displayed, when

playing ATRAC CD, text information written by
SonicStage, etc., is displayed, and when playing
WMA, WMA tag is displayed.

To change display items D, press (DSPL);
scroll display items D, press (SCRL) or set
“A.SCRL-ON” (page 10).

Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA, see page 12; ATRAC CD, see page 13.

Repeat and shuffle play

1

During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.

*1 When an MP3/WMA is played.
*2 When an ATRAC CD is played.

To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1

Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3*, AM1 or AM2.

2

Press and hold (BTM) until “BTM”
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

* FM3 tuning range is 65 to 74 MHz (at 30KHz step).

Storing manually

1

While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
“MEM” appears.
The number button indication appears in the
display.

Note
If you try to store another station on the same number
button, the previously stored station will be replaced.

Receiving the stored stations

1

Select the band, then press a number
button ((1) to (6)).

Tuning automatically

1

Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.

Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) –/+ to locate the
approximate frequency, then press (SEEK) –/+
repeatedly to fine adjust to the desired frequency
(manual tuning).

Select

To play

REP-TRACK

track repeatedly.

REP-ALBM*

1

album repeatedly.

REP-GP*

2

group repeatedly.

SHUF-ALBM*

1

album in random order.

SHUF-GP*

2

group in random order.

SHUF-DISC

disc in random order.

Other functions, Changing the sound settings, Adjusting the sound characteristics — bal/fad/sub

Customizing the equalizer curve — eq3, Adjusting setup items — set, Adjusting setup items — set, Other functions changing the sound settings, Adjusting the sound characteristics — bal/fad/sub, Customizing the equalizer curve — eq3

• Изображение
• Текст

9

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer
volume.

1

Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right)

t FAD (front-rear) t

SUB (subwoofer volume)*

2

t AUX*

3

*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB” (page 9).

“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.

*3 When AUX source is activated (page 10).

2

Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

With the card remote commander
In step 2, to adjust the selected item, press

<, M, ,

or

m.

Customizing the equalizer curve
— EQ3

“CUSTOM” of EQ3 allows you to make your
own equalizer settings.

1

Select a source, then press (EQ3)
repeatedly to select “CUSTOM.”

2

Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.

3

Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Tip
Other equalizer types are also adjustable.

With the card remote commander
In step 3, to adjust the selected item, press

<, M, ,

or

m.

Adjusting setup items — SET

1

Press and hold the select button.
The setup display appears.

2

Press the select button repeatedly
until the desired item appears.

3

Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).

4

Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.

Note
Displayed items will differ, depending on the source
and setting.

With the card remote commander
In step 3, to select the setting, press

< or ,.

The following items can be set (follow the page
reference for details):
“

z

” indicates the default settings.

CLOCK-ADJ (Clock Adjust) (page 4)

BEEP

To set “BEEP-ON” (

z

) or “BEEP-OFF.”

AUX-A*

1

(AUX Audio)

To turn the AUX source display “AUX-A-ON”
(

z

) or “AUX-A-OFF” (page 10).

SUB/REAR*

1

To switch the audio output.
– “SUB-OUT” (

z

): to output to a subwoofer.

– “REAR-OUT”: to output to a power amplifier.

DIM (Dimmer)

To change the brightness of the display.
– “DIM-AT” (

z

): to dim the display

automatically when you turn lights on.

– “DIM-ON”: to dim the display.
– “DIM-OFF”: to deactivate the dimmer.

CONTRAST

To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.

M.DSPL*

2

(Motion Display)

To select the Motion Display mode.
– “M.DSPL-SA” (

z

): to show moving patterns

and spectrum analyser.

– “M.DSPL-ON”: to show moving patterns.
– “M.DSPL-OFF”: to deactivate the Motion

Display.

continue to next page

t

Using optional equipment, Auxiliary audio equipment, Cd/md changer

Auxiliary audio equipment cd/md changer

• Изображение
• Текст

10

*1 When the unit is turned off.
*2 When the unit is turned on.
*3 When the audio output is set to “SUB.”

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:

Connecting the portable audio
device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

.

* Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected
audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX

FRONT IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Press the select button repeatedly until “AUX”

appears, and rotate the volume control dial to
adjust the volume level.

CD/MD changer

Selecting the changer

1 Press (SOURCE) repeatedly until “CD” or

“MD” appears.

2 Press (MODE) repeatedly until the desired

changer appears.

Playback starts.

Skipping albums and discs

1 During playback, press (GP/ALBM) +/–.

DEMO*

1

(Demonstration)

To set “DEMO-ON” (

z

) or “DEMO-OFF.”

A.SCRL (Auto Scroll)

To scroll long displayed item automatically
when the disc/group/track/album is changed.
– “A.SCRL-ON”: to scroll.
– “A.SCRL-OFF” (

z

): to not scroll.

LPF*

3

(Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF
OFF” (

z

), “LPF125Hz” or “LPF 78Hz.”

AUX

Connecting cord*

(not supplied)

To skip

Press (GP/ALBM)

album

and release (hold for a
moment).

album
continuously

within 2 seconds of first
releasing.

discs

repeatedly.

discs
continuously

then, press again within 2
seconds and hold.

Disc number

Unit number

Комментарии

Для ознакомления с инструкцией необходимо нажать на ссылку «ЗАГРУЗИТЬ», чтобы скачать pdf файл. Если есть кнопка «ПРОСМОТР», то можно просто посмотреть документ онлайн.

Для удобства, Вы можете сохранить данную страницу с файлом руководства по эксплуатации в свой список «избранное» прямо на сайте (доступно для зарегистрированных пользователей).

Смотрите инструкцию для похожих моделей: