GNSS приемники
Все товары категории
GNSS приемники SOUTH
GNSS приемники Trimble
Полевые контроллеры
Все товары категории
Контроллеры SOUTH
Контроллеры BlackView
Контроллеры Trimble
Контроллеры Geoelectron
Полевое ПО
Тахеометры
Все товары категории
Тахеометры SOUTH
Тахеометры Ruide
Тахеометры Trimble
Тахеометры Leica
Тахеометры GeoMax
Тахеометры Sokkia
Тахеометры Topcon
Тахеометры Nikon
Тахеометры Spectra Precision
Нивелиры
Все товары категории
Оптические нивелиры
Все товары категории
Нивелиры SOUTH
Нивелиры RGK
Нивелиры Sokkia
Нивелиры AMO
Нивелиры Bosch
Нивелиры Vega
Нивелиры Leica
Нивелиры ADA
Цифровые нивелиры
Все товары категории
Цифровые нивелиры SOUTH
Цифровые нивелиры Leica
Цифровые нивелиры Sokkia
Цифровые нивелиры Trimble
Приборы вертикального проектирования
Все товары категории
SOUTH
ADA
RGK
Б/У приборы
Все товары категории
Б/У радиомодемы
Б/у Тахеометры
Б/у GNSS приемники
GNSS станции и антенны
Все товары категории
Референцные станции
GNSS антенны
OEM Платы
Все товары категории
SinoGNSS
NovAtel
Trimble
Unicorecomm
Радиомодемы
Теодолиты
Все товары категории
Коллиматоры
Оптические теодолиты
Все товары категории
Теодолиты УОМЗ
Электронные теодолиты
Все товары категории
Теодолиты SOUTH
Теодолиты Leica
Теодолиты Nikon
Теодолиты RGK
Теодолиты Topcon
Теодолиты Vega
Теодолиты ADA
Лазерное оборудование
Все товары категории
Дальномеры
Все товары категории
Оптические
Лазерные
Лазерные уровни
Все товары категории
Лазерные уровни
Аксессуары для лазерных уровней
Аксессуары
Все товары категории
Акция
Аксессуары для GNSS оборудования
Штативы и биподы
Все товары категории
Биподы и триподы
Деревянные штативы
Алюминиевые штативы
Элевационные штативы
Штативы для дальномера
Штанги для лазерных уровней
Аксессуары для штативов
Рейки
Все товары категории
Рейки с Е-шкалой
Рейки с BAR-кодом
Инварные рейки
Рейки для лазерных приборов
Измерительные рейки
Вехи
Все товары категории
South
RGK
Отражатели
Все товары категории
Отражатели на веху
Минипризмы
Плёночные отражатели
Призменные системы
Круговые отражатели
Комплектующие
Рюкзаки и сумки
Сигнальные светоотражающие жилеты
Трегеры и адаптеры
Все товары категории
Трегеры
Адаптеры
Крепления
Антенны
Насадки на окуляр
Дорожные рейки
Радиостанции
Все товары категории
Радиостанции Motorola
Радиостанции Аргут
Измерительные рулетки
Аккумуляторы и зарядные устройства
Все товары категории
Аккумуляторы SOUTH
Аккумуляторы Nikon
Аккумуляторы Trimble
Аккумуляторы Leica
Кабели
Все товары категории
SOUTH
TRIMBLE
SPECTRA PRECISION
Nikon
Leica
Курвиметры
Все товары категории
RGK
CST/Berger
BOSCH
NEDO
Эхолоты и БПВА
Все товары категории
Эхолоты и БПВА SOUTH
Трассоискатели
Все товары категории
Radiodetection
RIDGID
GeoMax
Радио-Сервис
Сканирующие системы
Все товары категории
Воздушные сканеры
Мобильные сканеры
Наземные сканеры
Программное обеспечение
Аксессуары
АРЕНДА ОБОРУДОВАНИЯ
Все товары категории
Аренда GNSS оборудования
Все товары категории
Аренда GNSS приемника
Аренда роверного комплекта
Аренда тахеометра
320 000 ₽ Выгода — 6 400 ₽
313 600 ₽
Купить в 1 клик
- Наличие
- уточняйте
- Гарантия
- 2 года
- Самовывоз
-
Тюмень
- Возможна доставка до адреса
-
Способы оплаты
Арт. Galaxy G1
Госреестр №68310-17
Описание
Характеристики
Комплектация
-
• Приёмник — 1шт;
• GSM антенна — 1шт:
• Всенаправленная УКВ антенна — 1шт;
• Кабель передачи данных Lemo5/DB9 (RS232) — 1шт;
• Кабель передачи данных Lemo7/USB – 1шт;
• Кабель Lemo7/USB(OTG) для подключения внешних устройств – 1шт;
• Зарядное устройство для батарей с адаптером и кабелем питания от сети 100-240В 50/60Гц — 1шт;
• Ли-ион батарея 7.4В 3400мАч — 2шт;
• Ударопрочная сумка-рюкзак — 1шт;
• Пластина на веху для измерения высоты рулеткой — 1шт
• Измерительная рулетка 3м — 1шт
• Минивеха 30см с мини-адаптер 5/8 для крепления на штативе (базовый комплект)
• Карбоновая веха CLS25 2.5м (роверный комплект) или трегер с адаптером (базовый комплект) – 1шт;
Файлы
Оформить заказ
Экспертные мнения
Экспертные мнения
Купить GNSS приемник South Galaxy G1 в Тюмени легко — просто позвоните по телефону:: 8-800-551-11-01
- Manuals
- Brands
- South Manuals
- Measuring Instruments
- Galaxy G1
- User manual
System
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Galaxy G1
Galaxy G1 Measuring System
User Manual
South Surveying & Mapping Instrument Co., Ltd.
— 1 —
Related Manuals for South Galaxy G1
Summary of Contents for South Galaxy G1
-
Page 1
Galaxy G1 Galaxy G1 Measuring System User Manual South Surveying & Mapping Instrument Co., Ltd. — 1 -… -
Page 2: Table Of Contents
§ 1.3 Features ……………………- 5 — §1.4 Accessories &Components ………………- 7 — Chapter 2 GalaxyG1 Measuring System ……………… — 9 — §2.1 Galaxy G1 Mainframe ………………. — 10 — §2.1.1 The mainframe appearance ……………. — 10 — §2.1.2 Bottom interfaces ………………- 11 — §2.1.3 Indicator panel …………………
-
Page 3
§4.2.3 Parameter setting ………………- 57 — §4.2.4 Receiver register ………………. — 58 — Appendix A Galaxy G1 main technical specifications ………… — 59 — Appendix B GDL-20 radio technical specifications …………- 62 — Appendix C Technical Terms ………………… — 64 — FCC Statement …………………… -
Page 4: Chapter 1 Brief Introduction
Galaxy G1 Chapter 1 Brief Introduction Read this chapter, and you will have a brief knowledge of South Company and Galaxy G1 measurement system. § 1.1 Introduction Welcome to South Surveying&Mapping Instruments Co., Ltd, which is China’s leading GPS RTK instrument production and sales enterprises, has been committed to spread the international advanced GPS mapping survey techniques and products to the users.
-
Page 5: Features
970g, built with magnesium alloy materials. And the top edge is design to decrease harm for receiver in case of fall down to ground. Dual mode Bluetooth: SOUTH Galaxy G1 is equipped with Bluetooth 4.0 module, which is first to adopt this technology to support communication with smartphone, tablelet etc, to make sure Bluetooth communication more stable.
-
Page 6
B1,B2 and B3 signal from COMPASS, also get position result with only COMPASS signal. Smart and Open Platform: SOUTH Galaxy G1 is based on smart platform and powerful structure, which can make system work faster and more stable, less power consumption, also support smart voice guide and smart diagnosis etc. -
Page 7: Accessories &Components
Galaxy G1 §1.4 Accessories &Components Rover station standard configuration Mainframe antennƒ S10 controller Measuring tape Mainframe charger Mainframe batteries Tribrach&connector Bracket for controllers Retractable pole multi-function communication cable antennƒ ‹ˆ‘”ƒ–‹‘ ƒ—ˆƒ…–—”‡” ‘—–Š ‘†‡Ž ƒš
ƒ‹ † ‹ — 7 -… -
Page 8
Galaxy G1 Base station standard configuration Mainframe Antennas 25w radio Multiple communication cable Battery charger Batteries Tribrach & connector Communication cable Transmission antenna Support pole Frequency-change line Measuring tape — 8 -… -
Page 9: Chapter 2 Galaxyg1 Measuring System
Galaxy G1 Chapter 2 GalaxyG1 Measuring System Reading this chapter, you can grasp the components, installation and the function of Galaxy G1 measuring system. ① Rover Controller Base Tribrach Radio Radio Antenna Tripod Battery — 9 -…
-
Page 10: Galaxy G1 Mainframe
Galaxy G1 §2.1 Galaxy G1 Mainframe §2.1.1 The mainframe appearance The mainframe is a flat cylindrical, 100mm in height, 205mm in diameter, the height from the rubber seal ring to the bottom is 60mm. The front side is the buttons and indicator panel. The bottom of the instrument is radio and network interface, as well as the battery compartment and other interfaces;…
-
Page 11: Bottom Interfaces
Galaxy G1 Back Panel ① Battery compartment cover NFC label Compartment locker Mainframe Serial number: for registration, and identify the mainframe and the corresponding connection with the handheld. §2.1.2 Bottom interfaces — 11 -…
-
Page 12: Indicator Panel
In order to let you have a better understanding of the specific meaning of the indicator in the two states, we will describe in detail. Galaxy G1 indication panel has been re-designed with 3 LED indicators, simply and clearly indicates the various status, as shown below:…
-
Page 13: Mode Check And Switching
Galaxy G1 Indicator Status Meaning Normal voltage, built-in battery 7.4v POWER blink Low battery blink Number of satellite lock, cycle once every 5 seconds Satellite Handheld disconnected Bluetooth Handheld connected Static mode: flashing in accordance with the setting blink sampling interval when recording data…
-
Page 14: Handheld Controller S10
Galaxy G1 If all pass, there is voice message to remind, wait a few seconds, the instrument will restart automatically. If the self-check isn’t passed, there is also voice message to remind, and instrument will stay in the status of the self-check, results to identify the problem.
-
Page 15: Basic Introduction To The Handheld
Galaxy G1 §2.2.1 Basic introduction to the handheld Here takes S10 for example (If you want to know more about Psion controller, please refer to the manual for Psion controller), appearance of S10: — 15 -…
-
Page 16
Galaxy G1 Standard Configuration Description Li-ion Battery 3.7V/ 3000 mA/h Strap Black, 180*12mm Touch Pen Black, 12.7mm USB data cable 1.5m USB Charger 5V/1A Disc Charging Connect the charger with collector by the USB Link cable to recharge. Main Screen (Upper right corner) will show the Charging Icon in power off (on) status.(Once you connect Collector with PC to recharge;… -
Page 17
Galaxy G1 Installing the battery, turn the lock clockwise to the end. (SIM Card: The Missing Angle Corner of SIM Card will be at the lower right corner) Power on/off Make sure that the battery is fully charged or you can connect the Collector to PC via the USB Cable. -
Page 18
Galaxy G1 Installing Program Make sure that Collector is synchronized with PC. Run the Installation file at PC side. If the Installation Program is also suitable for Collector, you can copy the installation program into Collector to install. You can just copy the files into Collector when you need. -
Page 19
Galaxy G1 Camera Get into the Camera Mode by pressing the Camera Key for 3 or more seconds. Press Camera Key to take a photo and click “OK” on the screen to save. Note: If you want to know more information about S10, Please refer to S10 manual. -
Page 20: Blue-Tooth Connection
Galaxy G1 §2.2.2 Blue-tooth connection The short-range wireless Bluetooth communication facilities are for the Wireless exchange of information among a variety of Bluetooth-enabled devices. Tap on the Start menu (Settings) (control panel) to open (Bluetooth Device Manager). tap on the(scanning device) after setting the Bluetooth device, and the surrounding Bluetooth devices will be listed in the search list.
-
Page 21
Galaxy G1 After the pair, select an available com port for the receiver (usually COM 8 and COM 5 are OK). As shown below: — 21 -… -
Page 22: Software Installation And Connecting
Galaxy G1 After the establishment of the virtual serial port, other applications can use the serial port for data communication with a Bluetooth device. §2.2.3 Software installation and connecting Professional surveying and mapping software are made for measurement applications for different industry:»EGStar», «Power Star», «Mapping Star», «Navigation Star”…
-
Page 23
Galaxy G1 «Configure» «Port Config», in the «Port Configuration “dialog box, select the port “COM8 «, with the same serial number which you use to connect the Bluetooth serial port service. Click «OK.» If the connection is successful, the status bar will display related data. If there is barrier, exit EGStar to reconnect (If the above settings are correct, then link directly). -
Page 24: External Radio
Galaxy G1 §2.3 External Radio §2.3.1 Radio features: The radio GDL20 is a high-speed semi-manual wireless data transmission radio, whose air transfer rate can be up to 19200 bps and the RF transmitter power is larger, used in Southern RTK measurement system.
-
Page 25: Radio Appearance
Galaxy G1 Channel 6 464.625 Channel 7 465.625 Channel 8 466.625 §2.3.2 Radio appearance Control panel SN number §2.3.3 Radio interface and panel Mainframe Interface: 5-pin jack for connecting a GPS receiver and power supply Five pin port Antenna interface For connecting the transmitter antenna…
-
Page 26
Galaxy G1 Antenna interface Control Panel: control panel lights display the status of the radio, the key operation is simple and convenient, one-to-one interface can effectively prevent connection errors. Control panel Channel indicator light. ② Power indicator light, ON / OFF power key: This key controls the unit’s power switch. The red light on the left indicates the power status of the machine. -
Page 27: Radio Transmitting Antenna
Galaxy G1 Power switch (Shown in picture below): switch to adjust the radio power, AMP PWR lights on the panel indicate the radio power level, light on indicates low power, lights off high power. Power switch §2.3.4 Radio transmitting antenna The UHF transmitting antenna is particularly suitable for field use, the receiving antenna is 450MHz Omni-directional antenna, light and durable.
-
Page 28
Galaxy G1 Radio transmits power: radio transmits power based on the voltage of the power supply, check the voltage before use. High and low power use: use low-power transmitter when low power can satisfy the operation as high-power transmitter will exponentially consume battery power, excessive use will reduce battery life. -
Page 29: Mainframe Accessories
Galaxy G1 Recommend that you replace the batteries after six months to a year, to ensure the radio distance. §2.4 Mainframe accessories §2.4.1 Instrument Case The convenient RTK carrying case is customized for surveying workers; it has strong abrasive resistance and waterproofness. Meanwhile the unique backpack design reduces the heavy burden of field work.
-
Page 30: Battery And Charger
Galaxy G1 §2.4.2 Battery and charger The standard configuration includes two batteries and charger: The system indicator CHARGE turns red when the battery is being charged, the only indicator PULL turns green when charging is completed. Li-ion battery and battery charger: Charger&…
-
Page 31: Multi-Function Data Line
Galaxy G1 §2.4.4 Multi-function data line Radio Y-data line: multi-purpose cable is a «Y»-shaped cable used to connect the base station mainframe (5-pin red jack), transmitting stations (black jack) and external battery (red and black clip) for power supply and data transmission.
-
Page 32: Other Accessories
Galaxy G1 §2.4.5 Other accessories Other accessories include rover station centering rod, handheld bracket base point, connectors and measuring tape. Note: The models and types of instrument accessories will vary with the instrument upgrade. — 32 -…
-
Page 33: Chapter 3 Operations
Galaxy G1 Chapter 3 Operations Reading this chapter, you can grasp in detail how to use the G1 measurement to do system static, RTK operations. GPS measurement operation scheme refers to the operating scheme used to determine the relative position between the stations with the help of GPS technology.
-
Page 34: Static Operating
Galaxy G1 communication facilities (telephone and telegraph, post and telecommunications) and power supply, for power between the stations and equipments. §3.1 Static operating §3.1.1 Static Measurements Profile Static measurements: GPS positioning measurement by installed three (or more) GNSS receivers to perform simultaneous observation and determine the relative position between the stations.
-
Page 35: Operating Procedures
Galaxy G1 §3.1.2 Operating procedures Pre-measurement Project approval Program design Construction design Surveying and mapping data collection and arrangement Instrument test, test Reconnaissance, choice of site, buried stone Measurement Operating team stationed in Satellite status Forecast Observation planning Dispatch of operation and field work observation…
-
Page 36: Field Operation Notes
Galaxy G1 §3.1.3 Field operation notes: 1)Static mode of Galaxy G1 receiver only to set in EGStar software or other software (Such as Field Genius or SurvCE), please refer to the EGStar manual for more information. 2)Set up a tripod on the Control point, leveling and centering strictly on the measuring point.
-
Page 37: Rtk Operations (Radio Mode)
Galaxy G1 the original ground control network. Coincidence point generally should not be less than three (should perform leveling conjunction when not enough) and should be evenly distributed in the network in order to reliably determine the transformation parameters between the GPS and Ground Networks.
-
Page 38: Set Up The Base Station
Galaxy G1 the measurement point in the specified coordinate system. Depending on the modes of transmission of the differential signal, RTK is divided into the radio mode and network mode. This section first describes the radio mode, as shown below: Base mode with External Radio §3.2.1 Set up the Base Station…
-
Page 39: Start The Base Station
Galaxy G1 of impact on the GPS signal reception and emission of radio signals. 1) The receiver is set to the base station with external radio mode; 2) Set up tripods, the tripod on which to put the radio antenna should be placed at a higher point, the least distance between the two tripods should be 3metres.
-
Page 40
Galaxy G1 3 Set the base station parameters. Normally you only need to set difference mode that is Diff.mode in parameter settings while others using the default parameters. After setting click , the base station setting finish. 4 After setting the parameters, click «Start” (in general, the base station are… -
Page 41: Set Up Rover Station
Galaxy G1 Note: If you start the base station successfully the first time, you can directly open the base station mainframe and it will operate automatically if you don’t want to change the configuration. 5 The radio channel setting Set the radio channel on control panel of the external radio.
-
Page 42: Set Rover Station
Galaxy G1 2) Open the rover station mainframe, fix it on the centering rod of the carbon fiber pole. 3 Install the handheld bracket and the handheld Rover station §3.2.4 Set rover station Set the rover station after installing the rover station to achieve a fixed solution state, follow these steps: 1 Connect the handheld and the EGStar(see §…
-
Page 43: Rtk Operations Gprs Mode
Galaxy G1 3) Set the rover station parameter, normally you only need to set the differential data format, select the same format with base station setting, confirm and return to the main interface; 4) Channel settings: Configuration → Instrument Config → Radio channel setting, switch the radio channel to the same with the base channel;…
-
Page 44: Base And Rover Installation
Galaxy G1 §3.3.1 Base and Rover installation RTK network mode and radio mode is different on the transmission mode, so the installation is in a similar way, except that: 1) When the base station is switched to the base GPRS mode, needn’t to install external radio, you need to install the GPRS differential antenna;…
-
Page 45
Galaxy G1 1) Setup: Configure →GPRS Config 2) New network link should be added here, click “adds” to enter the setting interface. Note:”Read from module” is a function used to read the stored message in the system which is set by the receiver via GPRS link. Click “read”, the previous… -
Page 46: Electronic Bubble
Galaxy G1 3) Enter the network configuration information in turn, select «Eagle» for the base station, “Access” please enter machine number or customize. After setting, click «OK.» and enter parameter configuration phase. And then click «OK» to return to the network configuration interface;…
-
Page 47
Galaxy G1 Point survey interface Check ‘ Bubble’ option in the setting interface, click ‘OK’ return to Point survey interface, you can see the electronic bubble on the upper left of the screen. Collection sensor setting 2. The use of electronic bubble… -
Page 48: Tilt Survey
Not level Level § 3.3.4 Tilt survey Galaxy G1 supports tilt survey function, but you need acceleration calibration and magnetic calibration before use. 1. Acceleration calibration In the Point survey interface, click collection sensor setting button on the top of the screen.
-
Page 49
Galaxy G1 Point survey interface Click ‘Acceleration’ in the collection sensor setting interface, Collection sensor setting In the acceleration calibration interface, make sure the device is level, hold and click ‘Begin calibrate’ start to calibrate, until it’s finished. — 49 -… -
Page 50
Galaxy G1 Calibrating Calibrated 2 Magnetic calibration In the collection sensor setting interface, click ‘Magnetic’ to enter the magnetic calibration interface. Collection sensor setting — 50 -… -
Page 51: The Antenna Height Measuring
Galaxy G1 In the megnetic calibration interface, click ‘Begin calibrate’, then flip and rotate the G1 according to the sketch map on the bottom of the screen ( you can also draw ‘∞’after G1 is connected to the carbon fiber pole), until the calibration is finished 100%.
-
Page 52
Galaxy G1 ¾ Rod height: the height of the centering rod, which can be read from the rod scale; ¾ Vertical Height: the vertical height from the ground to the bottom of the main mainframe + antenna phase center to the bottom of the mainframe;… -
Page 53: Chapter 4 Connecting To Pc
Galaxy G1 Chapter 4 Connecting to PC Reading this chapter, you can grasp in detail how to connect Galaxy G1 to the computer for data transfer, and the mainframe setting. §4.1 Mainframe data transfer The receiver document management of Galaxy G1 uses U disc storage, plug and play, does not need to download the program, directly drag and download.
-
Page 54: In-Star Operation
Galaxy G1 §4.2 In-Star Operation In-Star is a multi-functional setting tool, which can perform data transfer, firmware upgrades, parameter settings, radio settings, network settings, mainframe register. This tool is simple and easy. Install In-Star to the computer ¾ Perform “Data Output” and “Parameter settings” via USB port ¾…
-
Page 55: Data Output
Galaxy G1 Data output: to copy static data from receiver (USB port) Firmware update: to upgrade firmware of receiver (COM port) Parameter setting: to configure some basic collection parameters of receiver (USB port) Radio setting: to configure radio module of receiver (COM port, radio direct-on…
-
Page 56: Firmware Update
Galaxy G1 you need and output target, then you can output the data in STH format or in Rinex format. §4.2.2 Firmware update Power off the receiver and connect it to PC with L797Y COM port Click browse to find the update firmware Select the right port and baud rate 115200, open, then power on the receiver, then the receiver will restart automatically.
-
Page 57: Parameter Setting
Galaxy G1 §4.2.3 Parameter setting Power off the receiver and connect it with L797Y USB port In parameter setting, you can edit the mask angle and sample interval in static survey and differential message type, data link, whether to record raw data in dynamic survey.
-
Page 58: Receiver Register
Galaxy G1 §4.2.4 Receiver register Power on the receiver and connect to PC with L797Y COM port, and then input register 36 bits code directly — 58 -…
-
Page 59: Appendix A Galaxy G1 Main Technical Specifications
Galaxy G1 Appendix A Galaxy G1 main technical specifications GNSS features 220 channels L1C/A L1C L2C L2E L5 GLONASS L1C/A L1P L2C/A L2P L3 SBAS L1C/A L5 for SBAS satellite supporting L5 Galileo GIOVE-A and GIOVE-B E1 E5A E5B The whole constellation receiver technology ,support all existing and…
-
Page 60
Galaxy G1 Static vertical 5mm+0.5ppm RMS accuracy Horizontal 8mm+1ppm RMS accuracy vertical 15mm+1ppm RMS accuracy Code differential 0.45m CEP positioning accuracy Stand-alone positioning 1.5m CEP accuracy Data link communication GPRS network communication module, Internationally GPRS data link accepted, automatic landing network, compatible with… -
Page 61
Galaxy G1 Mainframe Diameter 129mm, height 112mm size weight 0.97kg battery included Operation interface Button Visualization, convenient operation Indicator 3 indicators Environmental Characteristics IP67 standard, protect from temporary immersion to depth waterproof of 1m dustproof IP67 standard, protect from dust… -
Page 62: Appendix B Gdl-20 Radio Technical Specifications
Galaxy G1 Appendix B GDL-20 radio technical specifications General specifications Frequency bands 450-470MHz Channel interval 0.5MHz Channel transfer rate 19200bps Channel number Frequency Stability ±2.0ppm Modulation mode GMSK Antenna impedance 50Ω Ambient temperature -25°C 60°C Humidity 10-90% relative humidity, non-condensing…
-
Page 63
Galaxy G1 1 start bit, 8 data bits, no parity (parity bit can be Data stream set), 1 stop bit power DC power supply 12-15V, the typical of 13.8V, the voltage of the voltage power supply will affect the size of the RF… -
Page 64: Appendix C Technical Terms
Galaxy G1 Appendix C Technical Terms Ambiguity: unknown quantity is the integer number of cycles of the carrier phase measured from the satellite to the receiver. Baseline: The connection line of the two measurement points, on which to receive GPS signals and collect observation data simultaneously.
-
Page 65
Galaxy G1 or more radio signal propagation path. Observing session: the use of two or more receivers at the same time to collect GPS data period. Pseudo Range: GPS receiver in the time required to copy the code aligned with the received GPS code offset and multiplied by the speed of light to calculate the distance. -
Page 66: Fcc Statement
Galaxy G1 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This…
South Manuals and Guides:
The main types of South Galaxy G1 instructions: user guide — rules of useing and characteristics, service manual — repair, diagnostics, maintenance, operation manual — description of the main functions of South Galaxy G1 equipment, etc.
Most of the instructions, that you can see on the site are uploaded by our users. If you have available a manual or document for South Galaxy G1, which is currently not on the site or present in a different language version, we ask you to upload your document on website, using the «uploading form» available to all registered users.
Note for Owners:
Guidesimo.com webproject is not a service center of South trademark and does not carries out works for diagnosis and repair of faulty South Galaxy G1 equipment. For quality services, please contact an official service center of South company. On our website you can read and download documentation for your South Galaxy G1 device for free and familiarize yourself with the technical specifications of device.
More Measuring Instruments Devices:
-
Klein Tools MM2000
FUSE TESTING MM 1000/2000To test the mAµA fuse (FLU 44/100A): 1. Select the diode test function2. Attach black lead to VΩ input3. Attach red lead to mAµA input4. Touch leads together5. “OL” on the screen indicates blown fuseTo test the A fuse (FLU 11A): 1. Select the diode test function2. Attach black lead to VΩ input 3. Attach red lead to A input4. “OL” on the screen indicates blown f …
MM2000 Multimeter, 2
-
Apera 201DJ-C
2301-C Conductivity Electrode User Manual Brief Introduction Apera Instruments 2301-C Conductivity Electrode is featured with a proprietary platinum black sensor for accurate readings in a wide conductivity range up to 200 mS/cm. Technical Specifications Range 0 to 200 mS/cm Housing POM Constant K=1.0 Connector BNC Cable length 3 Ft Dimension ø12*155 mm Temperature sensor N/A Operating temperatu …
201DJ-C Test Equipment, 2
-
Parker Pneumatic MPS-4 Series
Pneumatic DivisionRichland, Michigan 49083!! WARNINGTo avoid unpredictable system behavior that can cause personal injuryand property damage:• Disconnect electrical supply (when necessary) before installation,servicing, or conversion.• Disconnect air supply and depressurize all air lines connected tothis product before installation, servicing, or conversion.• Operate within the manufacturer� …
MPS-4 Series Measuring Instruments, 4
-
Banner SureCross DX80
Preliminary Information Banner Engineering Corp • Minneapolis, MN USA www.bannerengineering.com • Tel: 763.544.3164 Sensonix Incorporated • Plymouth, MN USA 1 of 18 www.sensonix.com • 763.519.7042 RF by DX80 Gateway Installation & Operation Manual • Operates in 902-928MHz ISM Spectrum • FHSS operation • RF configurations – up to 150 mw • External antenna connec …
SureCross DX80 Gateway, 18