-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
R
SATELLITE FINDER
ST-5150
User’s Manual
Related Manuals for Satlink ST-5150
Summary of Contents for Satlink ST-5150
-
Page 1
SATELLITE FINDER ST-5150 User’s Manual… -
Page 3: Table Of Contents
English CONTENTS 1. GUIDE ………………….1 IMPORTANT SAFETY INSTRUCTIONS ……….. 1 1.2 UNPACKING ………………..1 1.3 PRODUCT OVERVIEW& ILLUSTRATION ……….2 2. OUTLINE ………………..5 3. THE MENU OSD INSTRUCTION ………….6 3.1 DVB-S2 ………………….6 3.2 DVB-T2 ………………….9 3.3 DVB-C ………………….12 3.4 LOOP SEARCH ………………..13 3.5 ANGLE CALCULATION …………….13 3.6 OTHERS ………………….13 3.7 MULTIMEDIA ………………..17…
-
Page 5: Guide
English 1. GUIDE 1.1 IMPORTANT SAFETY INSTRUCTIONS Thank you for choosing our product. Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows: • Be sure to read this user manual before starting your operation.
-
Page 6: Product Overview& Illustration
1.3 PRODUCT OVERVIEW& ILLUSTRATION NO Description FUNCTION Turn on/off meter Power indicator light Power 22kHz 22kHz indicator light Vertical /Horizontal polarization voltage output light LOCK Signal lock indicator light Charge Charger indicator light Show the main menu on the screen or jump back to MENU previous menu in sub-menu setting conditions…
-
Page 7
English NO Description FUNCTION AV-S AV IN/OUT switch key Auxiliary function key Turn on/off Torch Audio type selection / Red AUDIO Shortcut key for Sat Installation menu TV/R TV/Radio switch key Shortcut key for System Setting menu Compass Mechanical compass Volume Control or move NAVIGATION KEY cursor, channel or change,… -
Page 8
NO Description FUNCTION USB port for software upgrading or multimedia playing DC IN Connect to power adaptor Battery Battery Speaker Speaker integrated… -
Page 9: Outline
English 2. OUTLINE • 4.3 Inch High Definition TFT LCD Screen • Fully DVB-S/S2/T/T2/C compliant • MPEG2, MPEG4, H.264/MPEG4 AVC, H.265/HEVC hardware decoding • Digital meter for signal strength and quality • Supports Auto Scan and Manual Scan • Sound and Light Alarm for Locking Signal •…
-
Page 10: The Menu Osd Instruction
3. THE MENU OSD INSTRUCTION If you have installed and connected the cables to the finder, pressing MENU to display the Main Menu. • DVB-S2 • DVB-T2 • DVB-C • Loop Search • Angle Calculation • Others • Multimedia • System Setting Press the keys of YZAB to move the cursor up or down in the menu interface, then use OK to confirm a selection.
-
Page 11
English 3.1.1 SATELLITE Press AB key into the satellite list. Use YZ key to move the cursor, then press OK to select the satellite you want. 3.1.2 LNB TYPE There are 4 types you can select: C Band/Ku Band/Unicable I/ Unicable II. -
Page 12
3.1.9 DISEQC MODE Press AB key to set the type of port as None/DiSEqC1.0/1.1. 3.1.10 DISEQC TYPE & INPUT In C/Ku Band mode: we can press AB key to set DiSEqC 1.0/1.1 as A/B port, and set Tone Burst Mode as NONE/Tone Burst A/B. In Unicable mode: we can press AB key to switch IF Index from 1 to 8, or use number key to modify IF Freq, and then press AB key to select… -
Page 13: Dvb-T2
English • Scan: Press the ENTER key to search the current TP. • Au to S c an: P re s s t he re d key to auto blind search the current satellite. 3.2 DVB-T2 Select DVB-T2, then press OK into the Scan Setup.
-
Page 14
3.2.3 FREQUENCY Frequency of the current channel, input the value by using the number keys. 3.2.4 BANDWIDTH Press AB key to change the bandwidth, we can select 5, 6, 7 or 8M. 3.2.5 MODE Press AB key to change the DVB standard, we have there types including T/T2/T+T2, you can select one you want. -
Page 15
English 3.2.10 QUICK SEARCH When parameters have been set done, press OK into quick search. There will have some signal information displayed on the screen. • Scan: Press OK or red key to search current channel. • Auto Scan: Press green key to auto search the current channel. -
Page 16: Dvb-C
3.3 DVB-C Select DVB-C, then press OK into the Scan Setup. 3.3.1 COUNTRY Press AB key to change the default country. 3.3.2 CHANNEL NO. Press AB key to change the channel number. 3.3.3 FREQUENCY Frequency of the current channel, input the value by using the number keys.
-
Page 17: Loop Search
English 3.4 LOOP SEARCH We can see 8 TP or channels w h e n w e e n t e r i n t o t h i s interface, and press OK to edit. T here are 3 modes we c an choose: DVB-S2,DVB-T2 and DVB-C.
-
Page 18
3.6.1 CHANNEL LIST • SAT Press F1 key to switch different channel list. • Lock Press YZ key to select programs we want to lock, then press the red key to lock them. • Del Press the green key to delete current channel. • Move Select a channel first, then press the orange key to move to other position. -
Page 19
English Press the red key to add a new satellite. Press the green key to edit current satellite. Press the orange key to delete current satellite. Press the blue key to sc an current satellite. 3.6.3 TRANSPONDER LIST All the transponders under the current satellite will be displayed on the screen, and press AB key to switch satellite. -
Page 20
Press the red key to add a new transponder. Press the green key to edit current transponder. P r e s s t h e o r a n g e ke y t o delete current transponder. Press the blue key to scan current transponder. -
Page 21: Multimedia
English • Set West Limit Move motor to west. • Disable Limits Unlimited movement. Press the red key to save setting. Press the green key to reset setting. 3.6.5 EPG P r e s s Y Z k e y t o c h a n g e program.
-
Page 22: System Setting
3.8 SYSTEM SETTING • Language Press AB key to change the OSD language, default is English. • Country Press AB key to change the country. • Aspect Ratio Press AB key to change the aspect ratio: 4:3 LB/4:3 PS/16:9/ full screen. • Video Resolution Press AB key to change the video output resolution: 480p/576p/720p/1080i/1080p.
-
Page 23
English • Upgrade Will upgrade the file into the USB, then insert the machine. Press OK to upgrade interface, use the direction key to select update file, and press OK to mupgrade. Warning: Please don’t turn power off or pull out the USB, otherwise it will damage the machine’s software, and can’t boot again. -
Page 24: Technical Specification
4. TECHNICAL SPECIFICATION TRANSMISSION STANDARDS DVB-S2/S, DVBT/T2, DVB-C SATELLITE INPUT/DEMODULATION Connector Type F Type Input Frequency 950 to 2150 MHz Signal Input Level — 65 to -25 dBm Band Switch Control 22KHz LNB Supply 13V/18V, IMax 400mA Demodulation Type QPSK,8PSK,16APSK,32APSK Symbol Rate 2<Rs<45Mband(SCPC/MCPC) DVB-T/T2/C INPUT/DEMODULATION…
-
Page 25
English HDMI output connecter Format HDMI 1.4 AV input interface Connector Type 3.5 mm jack Video Input CVBS Audio Input Stereo Audio L/R input AUDIO/VIDEO PROCESSING MPEG-2 MP@HL, MPEG-1 Decoding,MPEG‐4 ASP@L5 HD Video decompression resolution,H.264 MP&HP@L4, H.265/HEVC,HW JPEG decoding Resolving rate PAL-25 frame@720*576,NTSC-30 frame@720*480 Support conversion for different video… -
Page 26
Adapter OUTPUT :DC12V/1.2A, INTUPT :100~240VAC 50/60Hz(Will be subject to actual configuration) Power Consumption Max. 10W PHYSICAL CHARACERSTICS Size (W x D x H) 17 x 12 x 4 (cm Net Weight… -
Page 27: Trouble Shooting
English 5. TROUBLE SHOOTING Problem Possible Causes What To Do Power switch is not Check to make sure No display light on Run out of power on. Even on batteries adapter No sound or picture,but the AV IN jack insert, but front panel Pull out AV IN cable no video input…
-
Page 28
The system is Check the UHF channel AV out No connected by SCART fixed in your system and picture(Video) cable and TV is not tune the UHF properly. in AV mode. Out of battery Even on adapter The key is not make sure no blocks working Key blocks…
Настройщик сигнала.
Измеритель сигнала Satlink ST-5150 позволяет измерять спутниковый сигнал DVB-S/DVB-S2 (HD). Также сигнал наземного телевидения DVB-T/DVB-T2 (HD) и сигнал кабельного телевидения DVB-C.
Возможное место для ваших реклам! Приветствуется серьезный рекламодатель! Пишите на e-mail договоримся…
Настройщик сигнала, что и зачем?
Имеет цветной ЖК-дисплей, выполненный по технологии TFT. Идеально подходит для ввода в эксплуатацию любой телевизионной или спутниковой установки.
Он позволяет настроить любую антенну эфирного и спутникового ТВ, настройку фильтров, подбор усилителей и т. д.
Настройщик сигнала имеет встроенный тюнер, позволяющий постоянно просматривать настраиваемый FTA-канал.
Предварительный просмотр каналов на экране и интуитивно понятное управление гарантируют быструю реализацию каждой установки.
Несомненным плюсом устройства является понятное меню, облегчающее работу людям, не имеющим большого опыта в этой сфере. Внешний выход HDMI позволяет подключить источник сигнала и вывести изображение на телевизор через кабель HDMI.
Настройщик сигнала, основные характеристики.
1. Измерение сигналов DVB-T/T2/C и DVB-S/S2 (полностью совместимый с MPEG-2/MPEG-4).
2. Поддержка DVB-T2 с H.265.
3. Предварительный просмотр принимаемого канала на 4-дюймовом ЖК-дисплее.
4. Встроенный видеодекодер: MPEG-2/H.264/H.265/HEVC 8 бит.
5. Процентная индикация силы и качества сигнала.
6. Измерение всех необходимых параметров сигнала, таких как: уровень сигнала, выраженный в дБмкВ, C/N, BER, MER.
7. Аккумулятор Li-On 7,4 В/2600 мАч.
8. Возможность редактирования спутника, транспондера, частоты.
9. Поддержка DiSEqC: 1.0, 1.1,1.2, тон 0/22 кГц, Unicable (dSCR), широкополосный.
10. Разъем USB (поддерживаемые форматы файлов: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
11. Защита от короткого замыкания в спутниковом тракте (LNB).
Технические данные.
— Встроенные тюнеры: DVB-S/S2, DVB-T/T2, DVB-C
— Цветной LCD-дисплей 4.3″ (480×272)
— Поддержка MPEG-2, MPEG-4 AVC, H.265 HEVC, Full HD
— Звуковой индикатор сигнала
— Тип измерений: уровень сигнала, качество; BER; PWR
— Поддержка сканирования: Auto, Blind, Manual или NIT
— Входные частоты: 950 — 2150 MHz для DVB-S/S2, 47-860 MHz для DVB-T/T2/C
— Min. input level: -65 dBm
— Max. input level: -25 dBm
— Symbol rate: 2-45 Mbps
— Поддержка 0/22KHz и 13/18V
— Питание антенны: 5V, 12V/24V 100mA
— Поддержка DiseqC 1.0/1.1/1.2, Unicable
— Время автономной работы: 3 часа
Настройщик сигнала поддерживает стандарт ETSI TS 101 154, часть 5.14.1 и 5.14.2 (HDTV) для 8-битного HDTV-приемника HEVC с частотой 50 Гц (разрешение 1920 x 1080 p50, 1280 x 720 p50).
Мануал для настройки: ЗАБИРАЕМ. Так к слову о приобритению, недавно видел на aliexpress, Satlink ST-5150.
SAT Finder, Satlink WS-6933.
Хорошее решение для настройки антенны на улице без ресивера и телевизора. Сатфаиндер подключается либо напрямую к антенне-тарелке при настройке, либо к проводу для контроля сигнала.
Смысл настройки заключается в поиске максимального сигнала от спутника. Тарелка ориентируется в возможном направлении сигнала, примерно, по компасу или «на глазок». Затем производится тонкая подстройка по показаниям сатфаиндера.
Satlink WS-6933 особенно полезен при настройке антенн с несколькими конвертерами или на сателлиты, уровень сигнала которых заметно слабее, чем у Eutelsat36 (36.0°E).
Удачи Друзья!
|
Detail Specifications: 1979/1979691-st5150.pdf file (03 Mar 2023) |
Accompanying Data:
Satlink ST-5150 Measuring Instruments PDF Operation & User’s Manual (Updated: Friday 3rd of March 2023 08:18:07 AM)
Rating: 4.6 (rated by 91 users)
Compatible devices: 980 DP1.4, 3530, 260-8PRT, UG20DL, 7940 Series, VEGAMET 624, WS-6922, WS-6935.
Recommended Documentation:
Text Version of Operation & User’s Manual
(Ocr-Read Summary of Contents, UPD: 03 March 2023)
-
22, Satlink ST-5150 18 3.8 SYSTEM SETTING • Language Press AB key to change the OSD language, default is English. • Country Press AB key to change the country. • Aspect Ratio Press AB key to change the aspect ratio: 4:3 LB/4:3 PS/16:9/ full screen. • Video Resolution Press AB key to change the video output resolution: 480p/576p/720p/1080i/1080p. • HDMI Audio Press AB key to…
-
25, 21 English HDMI output connecter Format HDMI 1.4 AV input interface Connector Type 3.5 mm jack Video Input CVBS Audio Input Stereo Audio L/R input AUDIO/VIDEO PROCESSING Video decompression MPEG-2 [email protected], MPEG-1 Decoding,MPEG4 [email protected] HD resolution,H.264 MP&[email protected], H.265/HEVC,HW JPEG decoding Resolving rate PAL-25 [email protected]*576,NTSC-30 [email protected]*480 Signal compatibility Support con…
-
26, 22 Adapter OUTPUT :DC12V/1.2A, INTUPT :100~240VAC 50/60Hz(Will be subject to actual configuration) Power Consumption Max. 10W PHYSICAL CHARACERSTICS Size (W x D x H) 17 x 12 x 4 (cm 3 ) Net Weight 1kg
… -
14, 10 3.2.3 FREQUENCY Frequency of the current channel, input the value by using the number keys. 3.2.4 BANDWIDTH Press AB key to change the bandwidth, we can select 5, 6, 7 or 8M. 3.2.5 MODE Press AB key to change the DVB standard, we have there types including T/T2/T+T2, you can select one you want. 3.2.6 ACTIVE ANTENNA Press AB key to switch antenna power…
-
28, 24 AV out No picture(Video) The system is connected by SCART cable and TV is not in AV mode. Check the UHF channel fixed in your system and tune the UHF properly. The key is not working Out of battery Even on adapter Key blocks make sure no blocks between the front panel
… -
18, Satlink ST-5150 14 3.6.1 CHANNEL LIST • SAT Press F1 key to switch dierent channel list. • Lock Press YZ key to select programs we want to lock, then press the red key to lock them. • Del Press the green key to delete current channel. • Move Select a channel first, then press the orange key to move to other position. • Edit Press the blue key to confirm channels wh…
-
8, 4 NO Description FUNCTION 29 USB USB port for software upgrading or multimedia playing 30 DC IN Connect to power adaptor 31 Battery Battery 32 Speaker Speaker integrated
… -
20, Satlink ST-5150 16 Press the red key to add a new transponder. Press the green key to edit current transponder. Press the orange key to delete current transponder. Press the blue key to scan current transponder. 3.6.4 MOTOR SETTING There are 5 modes in motor setting: • USALS Controling motor according to your local position, you can modify it in Angle Calculation. • …
-
19, 15 English Press the red key to add a new satellite. Press the green key to edit current satellite. Press the orange key to delete current satellite. Press the blue key to scan current satellite. 3.6.3 TRANSPONDER LIST All the transponders under the current satellite will be displayed on the screen, and press AB key to switch satellite.
… -
23, 19 English • Upgrade Will upgrade the file into the USB, then insert the machine. Press OK to upgrade interface, use the direction key to select update file, and press OK to mupgrade. Warning: Please don’t turn power off or pull out the USB, otherwise it will damage the machine’s software, and can’t boot again. • Factory Reset Press OK to start factory reset. …
-
7, 3 English NO Description FUNCTION 12 AV-S AV IN/OUT switch key 13 F1 Auxiliary function key 14 Turn on/o Torch 15 AUDIO Audio type selection / Red key 16 SAT Shortcut key for Sat Installation menu 17 T V/R TV/Radio switch key 18 SYS Shortcut key for System Setting menu 19 Compass Mechanical compass 20 NAVIGATION KEY Volume Control or move cursor, channel or change, con…
Recommended Instructions:
LFX33975ST, LCD52V, 2100 — LaserJet B/W Laser Printer, JF-NC66A, X402BV-FHD, GWP512
-
1Document Ref:pm65manualsFusion_L Revision:19 Dated: 22 August 2011Software version F00.21Large digit load / weight indicator / controllerFusion-L 6 digit versionConnection details, scaling and general information!Caution: There is a risk of electricalshock if this instrument is not properly installedCaution: Risk of danger: Read the wholemanual before you …
Fusion-L 6 digit 44
-
Quick Operation GuideQuick Zero & Calibration (Optional)10sQuick Config Display Switch OnAlarm AcknowledgeSelf Test1s1sPumpManual Datalog1s2sSwitch O3sCalibration Overduehttps://gasdetection.3m.com/en/ps200This Quick Operation Guide is NOT a substitute for the Operations & Maintenance Manual which MUST be read and understood, prior to operating, …
GMI PS200 Series 2
-
Getting Started GuidePSA Series Spectrum Analyzers This manual provides documentation for the following instruments:E4440A (3 Hz — 26.5 GHz)E4443A (3 Hz — 6.7 GHzE4445A (3 Hz — 13.2 GHz)E4446A (3 Hz — 44 GHz)E4448A (3 Hz — 50 GHz)Manufacturing Part Number: E4440-90242 Supersedes: E4440-90229 Printed in USAAugust 2004© Copyright 2001-2004 Agilent Technologies, Inc. …
E4440A 80
Additional Information:
Popular Right Now:
Operating Impressions, Questions and Answers:
Satlink Manuals and Guides:
The main types of Satlink ST-5150 instructions: user guide — rules of useing and characteristics, service manual — repair, diagnostics, maintenance, operation manual — description of the main functions of Satlink ST-5150 equipment, etc.
Most of the instructions, that you can see on the site are uploaded by our users. If you have available a manual or document for Satlink ST-5150, which is currently not on the site or present in a different language version, we ask you to upload your document on website, using the «uploading form» available to all registered users.
ST-5150 ST-5150 is a DVB-S/S2/T/T2/C and MPEG-2/4 H.264/H.265(8 Bit) compliant handheld
combo meter. With its compact size, light weight, intuitive user’s interface, long battery
operational hours and rich feature set, the meter provides all functions needed for
installation and verification of digital Satellite TV service, attenna signal and cable signal to
residential homes or multi-dwelling units. Order
● 4.3 Inch High Definition TFT LCD Screen
● Fully DVB-S/S2/T/T2/C compliant
● MPEG2, MPEG4, H.264/MPEG4 AVC,H.265(8 Bit)/HEVC hardware decoding
● Digital meter for signal strength and quality
● Supports Auto Scan and Manual Scan
● Sound and Light Alarm for Locking Signal
● Auto Calculate Angle of AZ ,EL
● Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone
● Speaker Integrated
● Support both AV out and AV in
● Support HDMI out
● LNB short protect
● 7.4V/2600mAh Li‐Ion Battery Included
● Software upgrade via USB port
● Easy to carry
| TRANSMISSION STANDARDS | |
| DVB-S2/S, DVBT/T2, DVB-C,H.264/H.265(8 Bit) | |
| SATELLITE INPUT/DEMODULATION | |
| Connector Type | F Type |
| Input Frequency | 950 to 2150 MHz |
| Signal Input Level | -65 to -25 dBm |
| Band Switch Control | 22KHz |
| LNB Supply | 13V/18V,IMax400mA |
| Demodulation Type | QPSK,8PSK,16APSK |
| Symbol Rate | 2<RS<45M band (SCPC/MCPC) |
| ISDB-T/Cable INPUT/DEMODULATION | |
| Connector Type | Female Type |
| Input Frequency | 48 to 862 MHz |
| Signal Input Level | -79.5dBm (MAX) |
| ANT Supply | 5V, 12V/24V Imax 100mA |
| Demodulation Type | QPSK,16QAM.64QAM,256QAM |
| LCD FEATURES | |
| LCD Type | TFT Transmissive |
| Number of Dots | 800(RGB)x272 |
| Active area (WxH) | 95.04×53.86mm² |
| AV output interface | |
| Connector Type | 3.5 mm jack |
| Video Output | CVBS |
| Audio Output | Stereo Audio L/R output |
| HDMI output connecter | |
| Format | HDMI 1.4 |
| AV INPUT INTERFACE | |
| Connector | 3.5 mm jack |
| Video Input | CVBS |
| Audio Input | Stereo Audio L/R input |
| AUDIO/VIDEO PROCESSING | |
| Video decompression |
MPEG-2 [email protected], MPEG-1 Decoding,MPEG-4 [email protected] HD resolution,H.264 MP&[email protected], H.265/HEVC,HW JPEG decoding |
| Resolving rate |
PAL-25 [email protected]*576,NTSC-30 [email protected]*480 |
| Signal compatibility |
Support conversion for different video formats |
| Video Format |
4:3,16:9,By Pan & Scan and Letter Box conversion |
| Audio Decompression | MPEG-1 Layer I/II, MPEG-2 Layer I/II |
| Audio Output Mode | Stereo, Mono,R/L |
| DATA SERVICE PORT | |
| Connector | USB |
| Data Protocol | USB2.0 interface |
| File Management System | NTFS,FAT32,FAT16 |
| File Format | wma,mp3,mp4,avi,jpg,jpeg,bmp,img |
| POWER SUPPLY | |
| Li-Ion Battery |
7.4V/2600mAh(The machine behind labeling shall prevail) |
| Adapter |
OUTPUT :DC12V/1.2A, INTUPT :100~240VAC 50/60Hz(Will be subject to actual configuration) |
| Power Consumption | Max. 10W |
| PHYSICAL CHARACERSTICS | |
| Size (W x D x H) | 17 x 12 x 4 (cm³) |
| Net Weight | 1kg |