Телефон эриксон диалог 4106 инструкция на русском

Ericsson Dialog 4187 Plus Owner Manual

Бренд:

Ericsson

Категория:

Telephones

Размер:

3 MB

Страниц:

40

Язык(и):

Чешский, Датский, Немецкий, Английский, Испанский, Финский, Французский, Венгерский, Итальянский, Голландский, no, Польский, Португальский, Русский, Словацкий, Шведский, zh

Открыть в новой вкладке

• Инструкции по эксплуатации
  
  4
  

На NoDevice можно скачать инструкцию по эксплуатации для Ericsson Dialog 4106. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Ericsson Dialog 4106. Инструкции по использованию помогут правильно настроить Ericsson Dialog 4106, исправить ошибки и выявить неполадки.

Analog Telephones
BusinessPhone Communication Platform
User Guide
Cover Page Graphic
Place the graphic directly on the page, do not care about
putting it in the text flow. Select Graphics > Properties
and make the following settings:
•
Width: 15,4 cm (Important!)
•
Height: 11,2 cm (May be smaller)
•
Top: 5,3 cm (Important!)
•
Left: -0,3 cm (Important!)
This text should then be hidden.
?
Title
Title
EN/LZTBS 160 1300 R1A
© Ericsson Enterprise AB 2003
2
BusinessPhone – Analog Telephone
Table of Contents
Table of Contents
page
Welcome .......................................................... 4
Description ....................................................... 6
Incoming Calls ............................................... 13
Outgoing Calls ............................................... 15
During Calls .................................................... 25
Call Forwarding .............................................. 29
Absence Information ...................................... 34
Messages ...................................................... 37
Security .......................................................... 46
Group Features .............................................. 49
Other Useful Features ..................................... 52
Settings .......................................................... 59
Useful Hints .................................................... 67
Installation ...................................................... 68
Troubleshooting .............................................. 73
Glossary ......................................................... 74
Index .............................................................. 76
BusinessPhone – Analog Telephone
3
Welcome
Welcome
Welcome to the User Guide for the Ericsson Analog Basic, Medium
and the ordinary Analog phone in the BusinessPhone
Communication Platform from Ericsson. The BusinessPhone
Communication Platform consists of BusinessPhone 50,
BusinessPhone 128i, and BusinessPhone 250.
The features described in this User Guide are related to version 5.1
or higher of the BusinessPhone Communication Platform. Some
might not work in earlier versions of the system and/or might be
protected by a hardware dongle that has to be bought separately.
The User Guide describes the features of the BusinessPhone
Communication Platform and the Basic / Medium phone with a
default programming. There may be some differences in the way
your phone is programmed. Please consult your system
administrator if you need further information.
The latest version of this User Guide can also be downloaded from:
http://www.ericsson.com/enterprise/
Important
The BusinessPhone Communication Platform supports all types of
analog telephones, but some features require that an Ericsson
Basic or Medium analog telephone is connected to the platform.
Throughout the guide you will be advised if a function is adapted for
a particular telephone or not.
Note: The Ericsson Basic and Medium analog phones can
be connected to all types of telephone exchanges.
4
BusinessPhone – Analog Telephone
Welcome
Copyright
All rights reserved. No parts of this publication may be reproduced,
stored in retrieval systems, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise, without prior written permission of the publisher except
in accordance with the following terms.
If this publication is made available on Ericsson media, Ericsson
gives its consent to downloading and printing copies of the content
provided in this file only for private use and not for redistribution. No
parts of this publication may be subject to alteration, modification
or commercial use. Ericsson will not be liable for any damages
arising from use of an illegal modified or altered publication.
Warranty
ERICSSON MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Ericsson shall not be
liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance or use of
this material.
Declaration of Conformity
Hereby, Ericsson Enterprise AB, S-131 89 Stockholm,
declares that this telephone is in conformity with the essential
requirements and other relevant provisions of the R&TTE
directive 1999/5/EC.
Details to be found at:
http://www.ericsson.com/sdoc
BusinessPhone – Analog Telephone
5
Description
Description
Dialog 4106 Basic
8
(upper side)
1
9
7
10
(bottom side)
2
6
3
5
4
6
BusinessPhone – Analog Telephone
Description
1
Programmable keys
Three keys for storing frequently called numbers. You can store one
number per key, see section “Dial-by-Name” on page 22.
Note: If you unplug the telephone, stored numbers will
remain for about 24 hours.
2
Mute / Prog
a. Switch microphone on or off. See section “During Calls” on
page 25.
b. Enter programming mode, see section “Settings” on page 59.
3
Message Waiting key
a. A flashing light indicates a waiting message. See section
“Messages” on page 37.
b. Programmable key for storing of one frequently called number.
See section “Dial-by-Name” on page 22
4
Last number redial / Pause key
a. Redial last number dialled.
b. Insert a pause if you have to wait for dial tone when
programming a number into the memory.
5
R-key
Used for example to make an inquiry, to transfer a call or to
establish a conference, see section “During Calls” on page 25.
6
Volume control
To adjust the volume.
7
Message Waiting switch
Switch Message Waiting indication on or off. Also used to reverse
the polarity in case of crossed line cables. See section “Settings”
on page 59.
8
Data port
Data port for connection of a modem, PC or other telephone
equipment.
9
Loudspeaker (beneath handset)
10
Handset with hearing aid function
Please note: The handset may attract and retain small
metal objects in the earcap region.
BusinessPhone – Analog Telephone
7
Description
Dialog 4147 Medium
12
(upper side)
1
2
3
3
13
9
14
10
11
(bottom side)
4
8
5
7
6
8
BusinessPhone – Analog Telephone
Description
1
Program
Store frequently called numbers, see section “Abbreviated
Numbers” on page 20.
2
Message Waiting / 2nd
a. A flashing light indicates a waiting message. See section
“Messages” on page 37.
b. Key for access to secondary key functions (these functions are
stated on the second line of the corresponding key).
3
Programmable keys
Eight keys for storing frequently called numbers. You can store two
numbers per key, see section “Abbreviated Numbers” on page 20.
Note: If you unplug the telephone, stored numbers will
remain for about 24 hours.
4
Mute
Switch microphone on or off. See section “During Calls” on
page 25.
5
Loudspeaker on/off / Headset key
a. Switch loudspeaker on or off. See section “During Calls” on
page 25.
b. Activate headset. See section “Headset” on page 64.
6
Last number redial / Pause key
a. Redial last number dialled.
b. Insert a pause if you have to wait for dial tone.
7
R-key
Used for example to make an inquiry, to transfer a call or to
establish a conference, see section “During Calls” on page 25.
Note: Sometimes it is required to change the flash time for
the R-key, see section “Flash time” on page 65.
8
Volume control
To adjust the volume.
9
Headset / Loudspeaker switch
a. At the headset position the loudspeaker key activates a
connected headset. See section “Settings” on page 59.
b. At the loudspeaker position the loudspeaker key activates the
loudspaker. See section “Settings” on page 59.
10
Prog On/Off switch
Enable or disable the program key. See section “Settings” on
page 59.
BusinessPhone – Analog Telephone
9
Description
11
Message Waiting switch
Switch Message Waiting indication on or off. Also used to reverse
the polarity in case of crossed line cables. See section “Settings”
on page 59.
12
Data port
Data port for connection of a modem, PC or other telephone
equipment.
13
Loudspeaker (beneath handset)
14
Handset with hearing aid function
Please note: The handset may attract and retain small
metal objects in the earcap region.
10
BusinessPhone – Analog Telephone
Description
Tones
Tones are audible in the handset.
Dial tone
(System ready to accept digits)
Special dial tone
(System ready to accept digits, active
diversion on telephone)
Ringing tone
- repeated after 4 s
(Ringing signal to called party)
Special ringing tone
- repeated after 4 s
Busy tone
(Called party is busy)
Number unobtainable tone
(Called number not accessible or vacant)
Call Waiting tone
Blocking tone
(Call cannot be executed due to congestion
or called party blocked)
Verification tone
(Verification that ordered function is
accessed)
Intrusion tone
(Sent to all parties during Intrusion)
Coference tone
- repeated after 15 s
(Sent to all parties in a Conference)
BusinessPhone – Analog Telephone
11
Description
Signals
Ringing signals are emitted from the phone.
Internal ringing signal
- repeated after 4 s
External ringing signal
- repeated after 4 s
Automatic Callback signal
Note: The tones and ringing signals in this guide refer to the
standard system but may vary between countries.
12
BusinessPhone – Analog Telephone
Incoming Calls
Incoming Calls
A ringing signal indicates an incoming internal- or external call.
u
Answer calls
Lift the handset
On another extension
uz
6
You can answer a call to another extension from any phone in your
office.
Lift the handset and call the ringing extension.
You receive busy tone.
Press.
BusinessPhone – Analog Telephone
13
Incoming Calls
Answer a second call
A call waiting tone will inform you, during a conversation, that a
second call is waiting on your phone. See also section “Camp-on”
on page 19. You have two options.
Option 1:
d
u
Finish the ongoing call:
Replace the handset.
The new call will be signalled on your phone.
Lift the handset to receive the new call.
Option 2:
¸d
u
d
u
14
Ask your conversation partner to wait:
Press and replace the handset.
The waiting call will be signalled on your phone.
Lift the handset to receive the new call.
After finishing the new call:
Replace the handset.
Your first call will be signalled on your phone.
Lift the handset to receive the first call again.
BusinessPhone – Analog Telephone
Outgoing Calls
Outgoing Calls
Sometimes you make a call but the person is not available. These
functions will help you in your attempts to establish contact with the
called party.
Make calls
u
z
0z
d
How to make internal and external calls.
Lift the handset and dial either:
An extension number to make an internal call.
Or:
The digit(s) for external call access and the external number.
Note: Which digit to press for external call access,
depends on the configuration of the system.
Replace the handset to end the call.
BusinessPhone – Analog Telephone
Note: You can make your calls faster, using Common
Abbreviated Numbers and by programming your own
Abbreviated Numbers, see section “Abbreviated Numbers”
on page 20.
15
Outgoing Calls
Wait for dial tone
Note: This function is not supported for other analog
telephones, only for the Dialog 4106 Basic and
Dialog 4147 Medium phone.
©
Sometimes it is required to wait for a new dial tone after dialling the
prefix digit when making an external call. In such situations, you
must store the pause for a new dial tone into the number:
Press.
Manual dial pause control:
You can control the length of a dial pause manually if you store the
pause after the fifth digit or later. This function is very useful, if you
are connected to a PBX that requires a new dial tone for extension
numbers.
Example:
©
©
16
You want to talk to Steven. Steven’s company has the number
12345678, and his extension is 1234, so the complete number is
12345678-1234. To wait for a new dial tone, you have to store a
pause before the extension number.
Press.
The phone number is dialled without the extension, in this example
12345678.
Press when the new dial tone is received.
Now the extension number is dialed.
BusinessPhone – Analog Telephone
Outgoing Calls
Last External Number Redial
When you initiate an external call the system automatically stores all
the dialled digits, irrespective of whether the call was successful or
not. Stored numbers can consist of maximum 32 digits.
Note: To redial a number that incorporates a wait for a new
dial tone, you must indicate to the telephone where in the
number it must pause and wait for the new dial tone. To do
this, press the Redial/Pause key at the proper place in the
number. See section “Wait for dial tone” on page 16.
u
©
u
***
On the Dialog 4106 Basic or Dialog 4147 Medium telephone:
Lift the handset.
Press to redial the last dialled external number.
On other analog telephones:
Lift the handset.
Press to redial the last dialled external number.
BusinessPhone – Analog Telephone
17
Outgoing Calls
Automatic Callback
5
d
u
18
You call an extension and receive busy tone or get no answer.
This can also be used if no external line is free:
Press.
Verification tone.
Note: The number for Automatic Callback may differ from
country to country, see table “Alternative programming for
Automatic Callback, Camp-on, Intrusion” on page 66.
Replace the handset.
You are called back if the extension finishes the ongoing call or the
next time the extension finishes a new call. You have to answer
within eight seconds otherwise the Callback service is cancelled.
Lift the handset when you are called back.
The requested extension is called automatically.
BusinessPhone – Analog Telephone
Outgoing Calls
Busy extension
You call an extension and receive busy tone.
Camp-on
4
You can notify a busy extension of your call by a muted ringing call.
Press to camp-on.
Keep the handset off hook. When the called extension replaces the
handset it will be called automatically.
Notes:
If you receive the busy tone again, the desired extension
does not allow Camp-on.
The number for Camp-on may differ from country to
country, see table “Alternative programming for Automatic
Callback, Camp-on, Intrusion” on page 66.
Intrusion
8
You can intrude on an ongoing call on a busy extension (if this
function is allowed).
Press to intrude.
Intrusion tone is heard and a three-party call is established. When
the called extension replaces the handset and you keep off hook,
the called extension will be recalled automatically.
Notes:
If you still hear the busy tone, your extension does not have
the authority to intrude or the desired extension is protected
against Intrusion.
The number for Intrusion may differ from country to
country, see table “Alternative programming for Automatic
Callback, Camp-on, Intrusion” on page 66.
BusinessPhone – Analog Telephone
19
Outgoing Calls
Diverted extension
u
*60*
z
#
Bypass Call Forwarding makes it possible to call a specific
extension, even if Call Forwarding is activated on this extension.
Lift the handset.
Dial.
Enter extension number.
Press.
You will be connected to the specified extension, regardless of
which type of Call Forwarding the called extension has activated.
Abbreviated Numbers
By using Abbreviated Numbers, you can make calls simply by
pressing a few keys. Frequently used external numbers are stored
as Common Abbreviated Numbers in the exchange.
Up to 10 Individual Abbreviated Numbers (your personal most
frequently used external numbers) can be stored and used on the
digit keys to .
0 9
Common Abbreviated Numbers
u
z
20
External numbers are stored centrally in your BusinessPhone
Communication Platform. Common Abbreviated Numbers can be
dialled from every extension that has the authority to do so.
Lift the handset.
Dial the Common Abbreviated Number.
Please refer to your telephone directory.
BusinessPhone – Analog Telephone
Outgoing Calls
Individual Abbreviated Numbers
u **
z
0 9
You can program and activate your most frequently used external
numbers on the digit keys to .
Lift the handset and press.
Dial the Abbreviated Number.
A number between 0 and 9.
Program Individual Abbreviated Number
u
*51*
z*
0z
#
How to program external numbers on the digit keys
0 to 9.
Lift the handset.
Enter programming mode.
Select an Abbreviated Number between 0 and 9 and press.
Dial the digit(s) for external call access and dial the number.
The number can consist of up to 24 digits.
*
Note: If your public network requires waiting for a second
dial tone, press .
Press.
u
#51*
z#
Cancel one specific Individual Abbreviated Number
u
#51#
Cancel all Individual Abbreviated Numbers
Lift the handset.
Press.
Enter an Abbreviated Number between 0 and 9 and press.
Lift the handset.
Press.
Confirmation tone.
BusinessPhone – Analog Telephone
21
Outgoing Calls
Dial-by-Name
Note: This function is not supported for other analog
telephones, only for the Dialog 4106 Basic and
Dialog 4147 Medium phone.
u
î
Head Office
22
You can program and activate directory numbers (extensions and
Common Abbreviated Numbers) on the programmable keys. On
the Dialog 4106 Basic you can also store one number on the
Message key. Stored numbers can consist of maximum 21 digits.
Lift the handset.
Wait for dial tone.
Press to make a call (pre-programmed).
Note: To dial a number that is stored on the second level,
press the Message Waiting/2nd key before pressing the
pre-programmed key.
BusinessPhone – Analog Telephone
Outgoing Calls
Program Dial-by-Name
How to program a directory number on the programmable keys.
On the Dialog 4106 Basic:
The Dialog 4106 Basic has four keys for Dial-by-Name
programming; the three programmable keys and the Message key.
u
¥
î
z
¥
d
Note: To store a number on the Message key, just press the
key during the following procedure like a normal
programmable key.
Lift the handset.
Wait for dial tone.
Press.
Press a programmable key.
If a number is already stored, it will be erased automatically.
If you would like to erase a Dial-by-Name number, store a 0 instead
of the telephone number.
Dial the number.
You can use any directory number, e.g. a Common Abbreviated
Number or a colleague’s extension number. You can also store a
pause (multiple pauses possible), the R-key function, the Last
Number Redial function or any code that contains or . To store
a number that incorporates a wait for a new dial tone, see section
“Wait for dial tone” on page 16.
* #
Press.
Replace the handset.
Notes:
You can write the names above the keys on the selfadhersive label. Because of the special label material, you
can also delete and re-write any key name.
If you press an invalid key during programming, the
programming mode will be terminated automatically and
you will here a special rejection tone.
BusinessPhone – Analog Telephone
23
Outgoing Calls
u
î
î
Program
z
î
d
Program
On the Dialog 4147 Medium:
Lift the handset.
Wait for dial tone.
Press.
Press a programmable key.
Note: To store a number on the second level, press the
Message Waiting/2nd key before pressing the
programmable key.
If a number is already stored, it will be erased automatically.
If you would like to erase a Dial-by-Name number, store a 0 instead
of the telephone number.
Dial the number.
You can use any directory number, e.g. a Common Abbreviated
Number or a colleague’s extension number. You can also store a
pause (multiple pauses possible), the R-key function, the Last
Number Redial function or any code that contains or . To store
a number that incorporates a wait for a new dial tone, see section
“Wait for dial tone” on page 16.
* #
Press.
Replace the handset.
Notes:
You can remove the transparent cover in order to write the
names beside the keys.
If you press an invalid key during programming, the
programming mode will be terminated automatically and
you will here a special rejection tone.
24
BusinessPhone – Analog Telephone
During Calls
During Calls
The BusinessPhone Communication Platform allows you to handle
calls in many different ways. You can for instance make an inquiry,
transfer the call or create a conference.
Monitoring
Note: This function is not supported for other analog
telephones, only for the Dialog 4147 Medium phone.
Â
d
ÄÂ
u
You have an ongoing conversation via the handset.
Press to switch the loudspeaker on.
Replace the handset.
The loudspeaker monitors the call.
Note: When the loudspeaker is on, the microphone is
automatically switched off in the handset. You can adjust
the volume, see section “Settings” on page 59.
Press to end the call.
From Monitoring to handset
Lift the handset.
Continue your conversation via the handset.
BusinessPhone – Analog Telephone
25
During Calls
Mute
Note: This function is not supported for other analog
telephones, only for the Dialog 4106 Basic and
Dialog 4147 Medium phone.
¥
You have an ongoing conversation.
Press to switch the microphone on or off.
When the lamp lights, the caller will not be able to hear the
conversation in your room.
Note: Mute key looks slightly different on the
Dialog 4147 Medium phone.
Inquiry
¸
z
During an ongoing conversation you like to make an inquiry to an
internal or external party.
Press.
The first call is put on hold.
Call the third party.
When the third party answers you can switch between the calls,
create a Conference and end one of the calls.
Refer Back
¸2
¸1
You can switch between connected parties:
Switch between calls.
Press to terminate.
The ongoing call is terminated. The other call is connected.
Note: Sometimes the R key must be pressed twice. If no
speech connection could be established, it may take a few
seconds until you are re-connected to the original call.
Whether you can put internal calls on hold or transfer calls
to external lines depends on the configuration of your PBX.
Consult your system administrator.
26
BusinessPhone – Analog Telephone
During Calls
Transfer
¸
z
d
You have an ongoing internal or external conversation and you
want to transfer the ongoing call.
Press.
Call the third party.
You can transfer the call before answer or wait for answer
Note: Make sure, that you are connected to the desired
party. Please read the notes and warnings in section “Useful
Hints” on page 67.
Replace the handset.
The call is transferred.
Transfer to a busy extension
You can even transfer calls to busy extensions. The other party will
hear a muted signal (Camp-on), and the call will be extended, as
soon as the ongoing call is terminated (if Camp-on is allowed).
Callback
You are called back, if you have transferred an external call and the
other extension has not answered the call within a certain time.
Your telephone will ring again.
Call Waiting
If you hear the Call Waiting tone during an ongoing conversation,
another person is trying to contact you.
d
u
To terminate the ongoing call and answer the waiting
call
Replace the handset to finish the ongoing call.
The waiting call is signalled on your phone.
Lift the handset to answer the new call.
BusinessPhone – Analog Telephone
27
During Calls
Conference
¸
z
¸3
d
28
You have an ongoing conversation and you want to establish a
telephone Conference.
Press.
Call the third party.
Press to establish a three party Conference.
Now you have established a three party Conference. To indicate
the Conference, all conference members will hear a periodical
conference tone.
Repeat the procedure to include other persons to the
Conference.
In this way, you can include up to six parties in a conversation. How
many of them can be external callers depends on the programming
of the system.
Replace the handset to leave the Conference.
BusinessPhone – Analog Telephone
Call Forwarding
Call Forwarding
When you are not available to take calls or decide to answer your
calls on another extension, it is useful to forward your calls to an
alternate answering position.
If you urgently need to talk to someone who has forwarded his
calls, the system is also equipped with a bypass function.
Depending on the type of diversion you are also able to record your
Personal Greeting, see section “Personal Greeting” on page 39.
Note: You can still make calls as usual.
Diversion when there is no answer
If you are not available to answer incoming calls (internal or
external), your system administrator can program your extension
to automatically divert calls to a programmed diversion address
(default time: 15 seconds).
Diversion when caller receives busy tone
If your extension is busy and you receive an incoming call (internal
or external), your system administrator can program your extension
to automatically divert the call to a programmed diversion address.
BusinessPhone – Analog Telephone
29
Call Forwarding
Fixed Diversion
This function directs your calls to a pre-programmed answering
position (e.g. secretary).
30
u *21#
Activate Fixed Diversion
u #21#
Cancel diversion
Lift the handset and dial to activate diversion.
Lift the handset and dial to cancel diversion.
BusinessPhone – Analog Telephone
Call Forwarding
Individual Diversion
This feature gives you the possibility to divert your calls to internal
and external positions, e.g. to any directory number, a colleague’s
extension, an external number or a Common Abbreviated Number
(e.g. your car telephone).
Note: In order to prevent misuse, Individual External
Diversion can be blocked for your extension, see section
“Security” on page 46.
Program and activate Internal Diversion
u
*21*
z
#
Divert your calls to an internal position.
Lift the handset.
Dial.
Enter the new diversion address.
Press to activate the Individual Diversion.
Verification tone. You can make outgoing calls as usual. A special
dial tone reminds you that Call Forwarding is active.
Note: An Individual Internal Diversion cannot be activated if
an Individual External Diversion is already activated.
u
#21#
Cancel Internal Diversion
Lift the handset.
Dial.
BusinessPhone – Analog Telephone
31
Call Forwarding
Program and activate a new External Diversion address
u
*22*
0z
#
To set a new Individual External Diversion address:
Lift the handset.
Dial.
Dial the digit(s) for external call access and enter the new
External Diversion address.
A maximum of 24 digits.
*
Note: If your public network requires waiting for a second
dial tone, press .
Press to activate the Individual Diversion.
Verification tone.
Notes:
Before you leave, call your extension to check if the External
Diversion has been set up correctly. This way you can make
sure that the number has been programmed properly and
that your calls will not be diverted to another person by
mistake.
Individual External Diversion can also be used via the DISA
function, see section “Other Useful Features” on page 52.
u
#22#
Cancel External Diversion
Lift the handset.
Dial.
Note: The programmed diversion address is not removed
from the memory, the diversion is just inactive.
Re-activate External Diversion
u
*22*#
32
Divert your calls to an external position.
Lift the handset.
Dial to activate the programmed External Diversion.
You can make outgoing calls as usual. A special dial tone reminds
you that Call Forwarding is active.
BusinessPhone – Analog Telephone
Call Forwarding
Follow-me
If you are in another room, you can still answer your calls by
forwarding them to where you are. To activate Follow-me, Individual
Diversion must be active on your telephone.
Activate Follow-me
u
*21*
z*
z#
Note: This procedure has to be executed from the
telephone the calls are diverted to.
Lift the handset.
Dial.
Dial your number and press.
Dial the new number and press.
Special dial tone.
Cancel Follow-me
u
#21*
z
#
Follow-me and Individual Diversion can also be cancelled from the
answering position.
Lift the handset.
Dial.
Dial your number.
Press.
Dial tone.
BusinessPhone – Analog Telephone
33
Absence Information
Absence Information
If you are not in the office for a certain period of time (e.g. meeting,
vacation, lunch, illness), this feature allows you to inform your
callers of the reason of your absence. External callers will be routed
to the operator who also has access to your absence info.
Note: When you have activated a diversion with a Personal
Greeting, callers will receive this greeting even if you have
activated the Absence Information, see section “Personal
Greeting” on page 39.
You can inform your callers with:
1) Pre-defined texts
Enter the reason for your absence and the date and time of
your return.
2) Voice information
Record a Voice message and name the reason of your absence.
34
BusinessPhone – Analog Telephone
Absence Information
Enter information
u
*23*
z
z
#
u
*23*
5
0627
#
To store Text or Voice information.
Lift the handset.
Dial to enter the information mode.
Select Pre-defined Text or Voice information.
Pre-defined texts
Enter Code.
Enter Completing Info from the table below.
Time of return
Date of return
Lunch
Meeting
Vacation
Illness
Code
1
2
3
4
5
6
Completing Info
hour (00-23) minute (00-59)
month (01-12) day (01-31)
back at, hour minute
back at, hour minute
back, month day
back, month day
Press to enter the information.
Internal callers receive the information on the display (or as spoken
information to callers without display phone). External callers will be
routed to the operator who also has access to your absent info.
Pre-defined texts example: Vacation, back June 27
Lift the handset.
Press.
Enter code.
Enter month and day.
Press.
Information active.
BusinessPhone – Analog Telephone
35
Absence Information
u
*23*
9
*
9
#
Voice information
Lift the handset.
Press to enter information mode.
Press and speak.
Press to play-back and listen to your recording.
Press and speak to re-record.
Press to activate.
Internal callers will hear the information via the handset or the
loudspeaker. External callers will be routed to the operator who
also has access to your absent info.
Note: You can dial your own extension number if you want
to check your information.
Change information
u #23#
u
*23*#
Erase
Lift the handset and press to erase info.
Save
Lift the handset.
Press to deactivate and save for later use.
Information is passive.
Use saved information
u
*23*#
36
When the information is switched off:
Lift the handset.
Press to activate saved info.
Information is active.
BusinessPhone – Analog Telephone
Messages
Messages
By using the Message system you can send, receive, forward, and
store different kind of messages. You have also access to a
number of helpful features, like placing external calls via the
company network and many more ...
Your incoming messages can be indicated by a rapidly flashing
Message key. See section “Message Waiting indication” on
page 63.
Password protection
The first time you enter the Message system (only possible from
your own extension) you might be requested to change your
Password if it is default (0000).
Note: Some systems are programmed to allow the default
Password.
d
Follow the voice announcements.
You are requested to enter a new Password, confirm and save it. If
you use the default Password, you are requested to try again.
Replace the handset to finish the procedure.
Or:
Continue with any of the Message functions.
If you want to change your Password again, it is possible from the
Message system or via the function “Change Password” on
page 46.
BusinessPhone – Analog Telephone
37
Messages
Individual Mailbox system
Callers are able to leave messages in your Individual Mailbox.
Activate
u *21*
z
#
u #21#
38
Divert your extension to the Mailbox system.
Lift the handset and dial.
Dial the number to the Mailbox system.
Please ask the system administrator for your defined Mailbox
system number.
Press.
Deactivate
Lift the handset and dial.
BusinessPhone – Analog Telephone
Messages
Personal Greeting
u
*59#
2
z
#
d
Depending on the type of diversion you want to activate, you can
leave three different Personal Greetings to the caller. You can
activate a diversion when a caller receives busy tone, when there is
no answer, or you can activate the Individual Diversion for all your
calls.
Lift the handset.
Dial.
During the procedure you will be asked for your extension number
and your Password.
Press to configure your Personal Greeting.
Enter diversion code.
Select an option below and follow the voice announcements.
Type of diversion
Diversion greeting on busy
Diversion greeting on no reply
Individual Diversion greeting
Code
1
2
3
Press to store the recorded greeting.
When you activate the diversion, the recorded greeting is played to
the next caller.
Replace the handset to finish the procedure.
Note: When you have activated a diversion with a Personal
Greeting, callers will receive this greeting even if you have
activated the Absence Information, see section “Absence
Information” on page 34.
Retrieve messages internally
When you lift the handset and receive a special dial tone, either a
diversion is activated or a message is waiting.
u *59#
Your incoming messages can be indicated by a rapidly flashing
Message key. See section “Message Waiting indication” on
page 63.
Lift the handset and dial.
See section “Check and store received messages” on page 42.
BusinessPhone – Analog Telephone
39
Messages
Retrieve messages - externally
z
z
To retrieve your messages from an external position:
Dial your company’s telephone number.
Dial the number to the Mailbox system.
During the procedure you will be asked for your extension number
and your Password.
Note: You cannot use the Default Password 0000 to
retrieve messages externally. If you want to check your
messages from an external position, you have to change
your Password first, see section “Change Password” on
page 46.
The following Mailbox functions can also be used from an external
position:
•
Change Password
•
Check and store received messages
•
Forward a Voice message
•
Send Message
•
Outcall (External) Notification
•
Personal Greeting
Outcall (External) Notification
With this function the Message system can notify you when new
Voice messages arrive. You can specify an external number, where
you will be called at a pre-programmed time or as soon as a new
message arrives.
Note: This feature may be restricted or not available. Ask
the system administrator for the availability and for more
information.
You can be notified in two different ways (depending on the
programming of the system):
Notification with Mailbox access:
You acknowledge the notification via your Password (has to differ
from the default value 0000). See section “Change Password” on
page 46 to select a new Password. You have full access to the
Mailbox system.
40
BusinessPhone – Analog Telephone
Messages
Notification without Mailbox access:
You get a short voice announcement, informing that someone has
left a message for you. You acknowledge the notification by
pressing any key and you have to call back the Mailbox system in
order to retrieve the message.
Note: If you do not acknowledge the notification within the
pre-programmed time, the connection is cancelled and
repeated later (ask the system administrator for the
programmed number of notification attempts).
u *59#
Programming:
Lift the handset and dial.
Note: Depending on the configuration, you might be asked
for your Password.
Follow the voice announcements.
You can program the external notification number, the notification
time and activate/deactivate the function. The external number
(including the digit(s) for external call access) can consist of up to
24 digits. The time is entered in 24h-format, e.g. 2030 for half past
eight with values automatically set to even quarters, i.e. 2013 will
be 2015.
d
Note: The notification number and time must be
programmed before you activate the notification.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
41
Messages
Check and store received messages
You can check and store your received messages.
Received messages are divided into following three categories:
•
New messages (not heard)
•
Heard messages
•
Stored messages
Voice messages can also be forwarded to other Mailbox numbers
(Individual or Common), see section “Forward a Voice message” on
page 43.
u
*59#
Note: Messages are deleted from the system after a certain
time. The time depends upon the category of the message.
Please ask your system administrator regarding this.
Lift the handset.
Dial.
You can check and store your received messages. Up to
20 messages can be stored.
Voice messages will be heard via the speaker or the handset.
Call Me messages will call the sender automatically (these
messages cannot be stored).
Note: Depending on the configuration, you might be asked
for your Password before you can retrieve your messages.
See section “Security” on page 46.
42
BusinessPhone – Analog Telephone
Messages
Forward a Voice message
u
*59#
Your received Voice messages (in the Individual Mailbox) can be
forwarded to other Mailbox numbers (Individual or Common). When
you forward a Voice message to an Individual Mailbox, the Mailbox
number is the same as the extension number.
Lift the handset.
Dial.
Note: Depending on the configuration, you might be asked
for your Password before you can retrieve your messages.
See section “Security” on page 46.
Follow the voice announcements.
You can forward new, heard or stored Voice messages.
Note: The forwarded message is a copy, i.e. it can be
deleted without deleting the original message.
d
Repeat the procedure to forward the message to another
Mailbox.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
43
Messages
Send Message
To send a message to an extension when you receive busy tone
or get no answer.
Callback message
9#
To send a Call Me message.
Press to send.
Voice message
99
*
9
#
44
To send a Voice message.
Press and speak.
Press to play-back and listen to your recording.
Press and speak to re-record.
Press to send.
BusinessPhone – Analog Telephone
Messages
Dictaphone function
If you want to record and retrieve personal Voice messages you
can use the Dictaphone function. A Dictaphone message is treated
as a normal message. How to retrieve Dictaphone messages, see
section “Check and store received messages” on page 42.
Record message
u
*58#
*
9
#
To start the recording:
Lift the handset.
Dial and record your message.
The maximum recording time is four minutes and 15 seconds.
Select one of the options below:
Press to play-back.
Press and speak to re-record.
Press to stop the recording and save the message.
BusinessPhone – Analog Telephone
45
Security
Security
You can use your four-digit Password for blocking your phone from
unauthorized use, for making external calls from any blocked
extension, for entering the Message system or when you are using
the DISA function.
Note: The first time you enter the Message system you
might be requested to change your Password if it is default
(0000). This procedure is performed directly in the Message
system. See section “Messages” on page 37.
u
#*72*
z
*
z
#
46
Change Password
Lift the handset.
Dial to select a new Password.
Dial your present Password.
The default Password is 0000.
Press.
Dial your new Password.
Press.
Verification tone.
BusinessPhone – Analog Telephone
Security
Bypass blocked extension
In order to make a call, you can temporarily bypass a blocked
extension.
u
*72*
z
#
Bypass own extension
Lift the handset.
Dial.
Dial your Password.
Press.
Dial tone. You can make one call from your extension.
Bypass another extension
u
*72*
z
*
z
#
This makes it possible to make a call on another, blocked
extension, by using your Password.
Lift the handset.
Dial.
Dial your Password.
Press.
Dial your extension number.
Press.
Dial tone. You can make one call from the blocked extension.
BusinessPhone – Analog Telephone
47
Security
u
*72#
u
#72*
z
#
48
Block extension
Lift the handset.
Dial to block your extension.
Verification tone.
Un-block extension
Lift the handset.
Dial.
Dial your Password.
Press to re-open.
Verification tone. Your extension is open for use.
BusinessPhone – Analog Telephone
Group Features
Group Features
When you are working together in a team the following Group
Features can be very useful.
Group Call-pick-up
u
z
In a Pick-up group, any member can answer any individual call to
group members. You answer a call to the group by dialling a special
answering number. Please ask your system administrator for the
configured number.
Lift the handset.
Dial the group Call-pick-up code.
Common Bell
u
z
The Common Bell function allows all extensions of the system
(operator included) to pick-up the call from an extension that has
been predefined as a Common Bell extension.
Lift the handset.
Dial the Common Bell pick-up code.
Please ask your system administrator for the Common Bell pick-up
code.
If two or more extensions simultaneously attempt to answer a call
from the Common Bell extension, only the first extension will pick it
up. The other extensions will receive the number unobtainable
tone. This will also happen if you dial the Common Bell pick-up
code and there are no calls waiting at the Common Bell extension.
BusinessPhone – Analog Telephone
49
Group Features
Group Hunting
Your telephone can be included in one or several hunt groups.
In a hunt group all members are represented with one common
directory number. 16 hunt groups can be programmed, each
containing 1 to 20 members. A member can be either an
extension number, an operator console or a fictive number.
Please ask your system administrator if you require this function.
Note: The number of cordless extensions in a hunt group
are limited to eight (including Tandem configurations).
Incoming calls to the hunt group are directed to free extensions in
the group. The hunt order within the group can be changed to suit
your needs. If all members of the hunt group are busy, an incoming
call is being queued. If no one answers this call before the
programmed time, the call is forwarded to the programmed
answering position (e.g. operator).
Note: If all members in a hunt group are busy, the Callback
or Intrusion functions are not available.
Log in
Before you can answer Group Hunting calls, you must log in.
50
u *28*
z
#
To log in to one hunt group:
u *28*
*#
To log in to all hunt groups:
Lift the handset and dial.
Dial the hunt group code.
Please ask your system administrator for the configured number.
Press.
Lift the handset and dial.
Press.
BusinessPhone – Analog Telephone
Group Features
Answer calls
Answer Group Hunting calls in the normal way.
Log out
u #28*
z
#
To log out from one hunt group:
u #28*
*#
To log out from all hunt groups:
Lift the handset and dial.
Dial the hunt group code.
Please ask your system administrator for the configured number.
Press.
Lift the handset and dial.
Press.
BusinessPhone – Analog Telephone
51
Other Useful Features
Other Useful Features
By using these features your productivity will be increased, e.g. you
can set Reminders for important meetings, place the costs for
external calls on separate accounts and much more ...
Tandem configuration
The Tandem configuration is a unit, consisting of two telephones
using the same directory number. One of the telephones is defined
as the Primary and the other one as the Secondary.
This function enhances the communication for users that, for
example, have a wired phone on their desk (the primary telephone)
and need to be mobile within their company’s building with their
own portable (the secondary telephone). Basically the Tandem
configuration works as follows:
u
*28#
d
To activate the Tandem configuration
Lift the handset.
Dial to log on the secondary telephone.
Replace the handset.
For incoming calls:
•
Both telephones are treated as 1 single extension.
For outgoing calls:
•
52
Both telephones are treated as 2 separate extensions.
BusinessPhone – Analog Telephone
Other Useful Features
u
#28#
d
To deactivate the Tandem configuration
Lift the handset.
Dial to log off the secondary telephone.
Replace the handset.
For incoming calls:
•
The secondary telephone cannot be called and the primary
telephone works as a normal stand-alone telephone.
For outgoing calls:
•
¸
z
d
Both telephones are treated as 2 separate extensions.
Transferring a call between members of a Tandem unit
Press.
Dial own directory number.
Replace the handset.
BusinessPhone – Analog Telephone
53
Other Useful Features
Reminder
u
*32*
z#
The phone can be set to remind you at any time within the next
24 hours (multiple settings are allowed).
Lift the handset.
Dial.
Dial Reminder time and press.
(00-23) hour + (00-59) minute. When the time is reached your
phone rings with recall signal.
Note: If you receive busy tone, your extension does not
have the authority to set a Reminder.
u
#32#
Cancel Reminder
Lift the handset.
Dial to cancel all settings.
Doorphone
The Doorphone is used to monitor the admission to your company,
i.e you can open the doorlock from your phone.
u
Answering Doorphone calls
Lift the handset.
You will be in speech connection with the calling party.
Opening of the doorlock
¸
z
54
After you have answered the Doorphone, you can open the door
by making an inquiry to the door-opener’s directory number
Press.
Dial the door-opener´s directory number.
Please ask your system administrator for the number.
BusinessPhone – Analog Telephone
Other Useful Features
Direct Inward System Access (DISA)
If you are working externally and you have the need to make
business calls, call your company and use the company PBX to
make an external call to the desired party. You just pay the costs for
the phone call to your company. The other costs will automatically
be placed on your extension number or on a special project.
Note: To activate this function, you have to change the
default Password from 0000 to a personal one. Which code
to use and how to change it, see section “Change
Password” on page 46.
z
z
z
You can also divert calls from your office extension to your external
position, see section “Call Forwarding” on page 29. During the
procedure you will be prompted for your Password.
Dial the public number of your company.
followed by the DISA number.
Ask the system administrator for the defined DISA number.
Note: If want to register the call on an Account Number,
you should use the Account Number procedure before you
enter the external number, see section “Account Number”
on page 56.
Dial the external number.
Or:
Use the External Diversion function.
Procedure, see section “Call Forwarding” on page 29.
Note: If you program a new diversion address, remember
to reset it when you return to your office.
BusinessPhone – Analog Telephone
55
Other Useful Features
Account Number
An Account Number can be entered to debit telephone costs to
different accounts. Depending on the system configuration the
Account Number has to be entered from a Verified Account
Number list (predefined) or you can invent an own Account
Number. The following prerequisites apply:
•
With the Verified Account Number you can restrict the making
of external calls (not a specific number or area), so everyone
who is allowed to make external calls will receive an Account
Number which has to be used each time he/she wants to make
an external call.
•
Verified Account Numbers contain up to 10 digits.
•
Own Account Numbers contain up to 15 digits.
The Account Numbers can also be used via the DISA function, see
section “Direct Inward System Access (DISA)” on page 55.
Verified or own Account Number
u
*9*
z#
Before an outgoing call:
Lift the handset.
Dial.
Enter Account Number and press.
Valid digits 0-9. Internal dial tone. Make the external call.
DTMF Tones
Note: This function is supported for the
Dialog 4106 Basic and Dialog 4147 Medium phone.
u
z
56
The DTMF function is used to control answering machines or any
other telecommunication devices.
Lift the handset.
Make an internal or external call to reach the desired device.
When your call is answered you can continue to dial digits which
will be sent as DTMF digits (tone signals) to the called device in
order to activate the desired functions.
BusinessPhone – Analog Telephone
Other Useful Features
Networking
Networking is the connection of several premises within a
company. The connection can be set up via leased lines, public
lines, Local Area Network (LAN) or Wide Area Network (WAN).
Ask your system administrator about details regarding networking.
IP calls
IP calls are internal calls sent via an internal data network (LAN or
WAN) and the transfer of data and voice is made on the same line.
If you are connected to an internal data network the IP connection
is made automatically. To minimise the traffic on the network the
speech quality is decreased.
If the speech quality is not acceptable you can disconnect the IP
call and switch to a non-IP call (alternative network). The switch
from the IP net to the non-IP net is made during the call, so the call
does not have to be disconnected.
¸
*61*
If you want to switch to a non-IP net during the call:
Press.
Dial.
During the procedure the other party is put on hold. When the
procedure is ready you will receive a special ringing tone and the
call is resumed in the non-IP net.
Note: A switch to a non-IP call can only be performed if the
original call is an IP call, otherwise you will receive a blocking
tone.
BusinessPhone – Analog Telephone
57
Other Useful Features
Least Cost Routing
Least Cost Routing (LCR) automatically selects the cheapest way
to establish the connection to the desired external number.
Please ask your system administrator if this function is installed in
your system. If the extension has been configured to use LCR,
each external call will be analysed and the cheapest way will be
selected.
u
0z
Use Least Cost Routing
Lift the handset.
Dial the digit(s) for external call access and the external
number.
The usual way of making an outgoing external call.
Calling Least Cost Routing
u
z
0z
58
If LCR has been installed in your system, but your extension is not
configured to use it automatically, you also have the opportunity to
get the cheapest connection by dialling the LCR code before you
dial an external number.
Lift the handset.
Dial the LCR code.
Please ask your system administrator for the LCR code.
Dial the digit(s) for external call access and the external
number.
BusinessPhone – Analog Telephone
Settings
Settings
Note: The functions in this chapter are not supported for
other analog telephones, only for the Dialog 4106 Basic
and Dialog 4147 Medium phone.
The Dialog 4106 Basic and Dialog 4147 Medium phones are
equipped with a couple of setting options, you can for instance set
and adjust a personal volume and ringing signal.
Handset and loudspeaker volume
ì
Use the volume keys. You can set different volume levels for
internal and external calls. During a call, adjust handset listening
volume in handset mode. Adjust loudspeaker volume in Monitor
mode.
Press to change the volume.
BusinessPhone – Analog Telephone
59
Settings
Ringing signal
By programming, you can adjust the ringing character and ringing
volume. To change the ringing character and volume, you have to
enter the programming mode.
Programming the ringing character and volume for the
Dialog 4106 Basic
u
¥
#
z
The ringing signal character can be adjusted with three different
characters, each with another three volume levels.
Lift the handset.
Wait for the dial tone.
Press.
Press.
Enter Digit from the table below.
Digit (character)
1
2
3
4
5
6 (default)
7
8
9
0
Ringing character
- Repetition rate
1 time
1 time
1 time
4 times
4 times
4 times
10 times
10 times
10 times
None
Ringing volume
Soft
Medium
Loud
Soft
Medium
Loud
Soft
Medium
Loud
Off
Notes:
Default setting is digit 6. If you choose 0, the ringing signal
will be turned off until the next time you go off hook.
¥
d
60
Please note also that you will not hear the ringing singing
signal during programming.
Press.
The selected ringing signal is stored.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
Settings
Programming the ringing character and volume for the
Dialog 4147 Medium
The ringing signal character can be adjusted with five different
characters and three different volume levels.
u
î
7
z
Program
Program ringing character:
Lift the handset.
Wait for the dial tone.
Press.
Press.
Enter Digit from the table below.
You can hear the chosen character.
Digit (character)
0
1
2
3
4
î
d
Program
Ringing character
- Repetition rate
1 time
2 times
4 times
6 times
10 times
Note: Default setting is digit 0.
Press.
The selected ringing character is stored.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
61
Settings
u
î
6
z
Program
Program ringing volume:
Lift the handset.
Wait for the dial tone.
Press.
Press.
Enter Digit from the table below.
You can hear the chosen volume.
Digit (character)
1
2
3
î
d
Program
u
î
9
0 1
î
d
Program
or
Program
62
Ringing volume
Soft
Medium
Loud
Note: Default setting is digit 3.
Press.
The selected ringing volume is stored.
Replace the handset to finish the procedure.
Switch off/on ringing signal:
Lift the handset.
Wait for the dial tone.
Press.
Press.
Press.
0=Off and 1=On. Default setting is digit 1.
Press.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
Settings
Hearing aid compatibility
Since your telephone has a built-in inductive coupler for the hardof-hearing, anyone so desiring can use the telecoil in his/her
hearing aid while telephoning. To do so, simply switch the hearing
aid in the T position.
Message Waiting indication
Your incoming messages can be indicated by a rapidly flashing
Message key. It is well known that the line leads are twisted after
installation (the Message Waiting LED will be on when there is no
Message Waiting signal and will go off when there is a Message
Waiting signal). To solve this problem there are three possible
settings for the Message Waiting indication:
•
STD This setting should be used when no Message Waiting
indication is required. This is also the default setting upon
delivery.
•
MW+. Use this position when Message Waiting indication is
required and the line cabling is straight.
•
MW-. Use this position when Message Waiting indication is
required and the line cabling is twisted.
At the bottom side of your phone:
Slide the switch to the required position.
Enable/Disable Program key
Note: This function is only supported for the
Dialog 4147 Medium phone.
Via a switch it is possible to enable or disable the program key.
When the switch is set in the Off position, no programming is
possible (i.e. the memory content is locked).
At the bottom side of your phone:
Slide the switch to the required position.
BusinessPhone – Analog Telephone
63
Settings
Headset
Notes:
This function is only supported for the Dialog 4147 Medium
phone.
To install the Headset, see section “Installation” on page 68.
Headset calls are controlled via the Loudspeaker/Headset key.
To enable the Headset functionality, you have to change the
Loudspeaker/Headset switch into the Headset position.
At the bottom side of your phone:
Slide the switch to the required position.
Â
ÄÂ
Answer calls
Press to answer.
Press to end the call.
Make calls
Â
z
ÄÂ
64
With the handset on hook.
Press.
Dial the number.
Press to end the call.
BusinessPhone – Analog Telephone
Settings
Flash time
Note: This function is only supported for the
Dialog 4147 Medium phone.
u
z
u
î
2
0 1
î
d
Program
or
Program
Some systems require a different flash time for the R-key. You can
set two different flash times (timed breaks). To find out if you have
to change the flash time, proceed as follows:
Lift the handset.
Make a call using any of the services that require R.
If you cannot use the service, you need to change the flash time.
Change flash time:
Lift the handset.
Wait for the dial tone.
Press.
Press.
Press.
0=100 ms and 1=600 ms. Default setting is digit 0.
Press.
Replace the handset to finish the procedure.
BusinessPhone – Analog Telephone
65
Settings
Alternative programming for Automatic
Callback, Camp-on, Intrusion
The associated number for using the Automatic Callback, Campon or the Intrusion function may vary from country to country. If you
cannot use a code of a function, maybe your exchange system has
been programmed with a different associated number.
Because this User Guide describes only the default programming,
the following table shows the most common settings in some of
these countries that are known for a different programming.
Austria, Belgium,
Brazil, Denmark,
Germany
Camp-on
Automatic Callback
Answer calls, another extension
Intrusion
66
5
6
8
4
BusinessPhone – Analog Telephone
Useful Hints
Useful Hints
Connections between external lines
With your BusinessPhone PBX, you can establish an external call
diversion or a conference with more than one external party or
transfer an external call to another external destination (e.g.
a mobile phone). These features are very useful for everyday
business life.
Note: When these features are used, your BusinessPhone
will occupy at least two external lines.
However, there may be disadvantages in connecting to several
external lines. We would therefore like to draw your attention to the
following:
•
Please do not transfer external calls to an external
Mailbox, to information systems or to external parties
before they have answered.
•
Try to avoid diverting calls to third parties before they
have answered.
•
If you are connected to two external lines, cancel one
call by pressing R and 1.
If the external parties are not persons (Mailbox, automated
information or attendant systems, etc.), connections on external
lines can last a long time, which can be costly. Moreover, such calls
may occupy two of your system’s external lines. You can restrict
connections between the external lines by re-programming your
system.
Please ask your system administrator or contact our service center
for more information.
BusinessPhone – Analog Telephone
67
Installation
Installation
Note: This chapter is only for the Dialog 4106 Basic and
Dialog 4147 Medium phone.
Install cables
Handset cable to the left
Handset cable to the right
You can put the cable to the handset in the notch underneath the
telephone. The cable to the exchange has to be plugged in “LINE”
and the handset cable has to be plugged in “HANDSET”.
Note: The headset is for use with the Dialog 4147 Medium
phone only.
Change cables
To remove a cable, use a screwdriver to unlock the stop.
68
BusinessPhone – Analog Telephone
Installation
Install stands and adapt telephone
Position high
Press to fasten stand
BusinessPhone – Analog Telephone
Position low
Release to remove stand
69
Installation
Install card
Note: This section only applies to the Dialog 4147 Medium
phone.
Use the Designation Card Manager to make and print your own
designation cards. The Designation Card Manager is included on
the Telephone Toolbox CD for BusinessPhone Communication
Platform. For more information, please contact your Ericsson
Enterprise certified sales partner.
70
BusinessPhone – Analog Telephone
Installation
Wall mounting
The phone can be wall mounted without using a special console.
Useful for instance in conference rooms or public areas.
1
Use a screwdriver to remove the handset hook.
2
Turn the hook upside down and insert.
3
Use a screwdriver to remove the two plastic covers.
4
Drill wall holes according to measure.
5
Mount screws according to measures and attach the
phone.
BusinessPhone – Analog Telephone
71
Installation
Placing the telephone
•
Do not place your telephone on sensitive surfaces. Use a
non-slippery pad to protect your furniture from possible
damage.
•
Do not place your telephone near sources of extreme heat,
e.g. near the radiator.
•
Make sure that the line cable isn´t creased.
Cleaning the telephone
Use a slightly moistened (not wet) soft cloth or an anti-static cloth
and wipe off the telephone carefully. Do not use rough cloth,
solvents or aggressive cleaning fluids. Any damages of the
telephone, that are caused by non-observance of these
instructions, are not part of the liability given by the manufacturer.
72
BusinessPhone – Analog Telephone
Troubleshooting
Troubleshooting
This section contains information on how to solve common
operational problems. Go through the following steps if you
encounter any problems. If this does not solve the problem,
contact your system administrator. If others have similar problems,
there may be a system error.
Fault check list
1. Make sure your telephone is connected to an analog line.
2. Read the Installation chapter.
To make sure that you have done everything correctly and that
everything is properly connected.
3. Disconnect all extra equipment.
If your telephone is working properly when done, the problem
lies in the extra equipment.
4. Connect a functioning telephone instead of the faulty
one.
If that telephone is working properly, the problem is probably in
your telephone, contact your system administrator.
5. Check for operational problems.
If operational problems are found, the problem is in the
telephone network, contact the local telephone service or the
local telephone company.
BusinessPhone – Analog Telephone
73
Glossary
Glossary
Abbreviated Number Dialling
Initiating a call to a pre-programmed number
by dialling a code or pressing a key.
Short numbers can be:
1. Common, which means that all extensions
can use them.
2. Individual, which means that they are
programmed and used by each extension
separately (10 numbers).
See section “Abbreviated Numbers” on
page 20.
Account Number
To place call costs on an Account Number. See
section “Other Useful Features” on page 52.
Callback
An indication to a busy extension, to inform the
person that you want to speak to him/her.
See sections “Messages” on page 37 and
“Outgoing Calls” on page 15.
Camp-on
To place (queue) a call to a busy extension.
See section “Outgoing Calls” on page 15.
Dial-by-Name
Initiation of a call by operating a single key.
Internal numbers (or Common Abbreviated
Numbers) can be stored on each extension.
See section “Abbreviated Numbers” on
page 20.
74
Direct Inward System Access (DISA)
If you are working externally, the DISA function
enables you to make external calls (long
distance) via the company PBX. You only pay
for the call to your company. See section
“Other Useful Features” on page 52.
Directory number
Numbers with 1 – 8 digits which are assigned
to extensions or external lines or as common
Abbreviated Numbers.
Diversion
Incoming calls to an extension are diverted to
another directory number (extension, Common
Abbreviated Number or the operator).
There are three possibilities:
1. Direct, which means that all calls to an
extension are forwarded directly.
2. On no reply, which means that a call is
forwarded if it is not answered within a certain
time.
3. On busy, which means that a call is
forwarded if the extension is busy.
See section “Call Forwarding” on page 29.
Diversion Bypass
This is useful for letting urgent calls through to
an extension where diversion is active.
See section “Call Forwarding” on page 29.
Extension
All telephones connected to the PBX have a
unique internal number (up to 3 digits).
BusinessPhone – Analog Telephone
Glossary
Information
Internal callers are informed about absence
and time of return. External callers are diverted
to the operator, where the same information is
available. Information can be of two kinds:
1. Pre-programmed text information.
2. Voice information.
Intrusion
To intrude on an ongoing call when a requested
extension is busy. See section “Outgoing Calls”
on page 15.
Least Cost Routing
A function that automatically selects the
cheapest way to connect your external call
(not necessarily the shortest distance). See
section “Least Cost Routing” on page 58.
Mailbox
The Mailbox system controls the messages
that are left for or sent by you when you are
absent. See section “Messages” on page 37.
Message
A message can be sent to any extension. This
is useful when you receive the busy tone or get
no answer. There are two kinds of message:
1. Call Me message.
2. Voice message.
See section “Messages” on page 37.
Mute
To switch the microphone temporarily off.
See section “During Calls” on page 25.
BusinessPhone – Analog Telephone
Password
A four-digit code needed to e.g. block your
extension and retrieve messages from the
Mailbox system. You can set your own
Password. See section “Security” on page 46.
PBX
Private Branch Exchange. Your telephone
switching system (e.g. BusinessPhone 250).
Pre-defined text
Pre-programmed absent information.
See section “Absence Information” on
page 34.
Third party
A third connection (person), which can
be included in an ongoing two person
conversation. The connection can be
internal or external. See section “During Calls”
on page 25.
Tie line
An external line from the private network.
Transfer
During an internal or external ongoing call you
can make an inquiry and then transfer the call
to another party (internal or external).
See section “During Calls” on page 25 and
“Useful Hints” on page 67.
Trunk line
A trunk line is the same as an external line.
Can be either digital or analog.
75
Index
Index
A
Abbreviated Numbers 20
Absence Information 34, 35
Change information 36
Account Number 56
Alternative programming for Automatic
Callback, Camp-on, Intrusion 66
Answer calls 13
Automatic Callback 18
B
Block extension 48
Busy extension 19
Bypass blocked extension 47
C
Call Forwarding 29
Diversion when caller receives busy tone 29
Diversion when there is no answer 29
Fixed Diversion 30
Follow-me 33
Individual Diversion 31
Call Waiting 27
Camp-on 19
Change information 36
Change Password 46
Check and store received messages 42
Cleaning the telephone 72
Common Abbreviated Numbers 20
Common Bell 49
Conference 28
Copyright 5
D
Declaration of Conformity 5
76
Description 6
Dialog 4106 Basic 6
Dialog 4147 Medium 8
Signals 12
Tones 11
Dial-by-Name 22
Dictaphone function 45
Direct Inward System Access (DISA) 55
Diversion when caller receives busy tone 29
Diversion when there is no answer 29
Diverted extension 20
Outgoing Calls 20
Doorphone 54
DTMF Tones 56
During Calls 25
Call Waiting 27
Conference 28
Inquiry 26
Monitoring 25
Mute 26
Refer Back 26
Transfer 27
E
Enter information
Enter information 35
Erase information 36
F
Fault check list 73
Fixed Diversion 30
Flash time 65
Follow-me 33
Forward a Voice message 43
BusinessPhone – Analog Telephone
Index
G
Glossary 74
Group Call-pick-up 49
Group Features 49
Common Bell 49
Group Call- pick-up 49
Group Hunting 50
Group Hunting 50
H
Handset and loudspeaker volume 59
Headset 64
Hearing aid compatibility 63
I
Incoming Calls 13
Answer calls 13
Individual Abbreviated Numbers 21
Individual Diversion 31
Individual Mailbox system 38
Inquiry 26
Install cables 68
Install card 70
Install stands and adapt telephone 69
Installation 68
Cleaning the telephone 72
Install cables 68
Install card 70
Install stands and adapt telephone 69
Placing the telephone 72
Wall mounting 71
Intrusion 19
IP calls 57
L
Last External Number Redial 17
Least Cost Routing 58
M
Make calls 15
Message Waiting indication 63
Messages 37
Check and store received messages 42
Dictaphone function 45
Forward a Voice message 43
BusinessPhone – Analog Telephone
Individual Mailbox system 38
Outcall (External) Notification 40
Password protection 37
Personal Greeting 39
Send Message 44
Monitoring 25
Mute 26
N
Networking 57
O
Other Useful Features 52
Account Number 56
Direct Inward System Access (DISA) 55
Doorphone 54
DTMF Tones 56
IP calls 57
Least Cost Routing 58
Networking 57
Reminder 54
Tandem configuration 52
Outcall (External) Notification 40
Outgoing Calls 15
Abbreviated Numbers 20
Automatic Callback 18
Busy extension 19
Camp-on 19
Common Abbreviated Numbers 20
Dial-by-Name 22
Individual Abbreviated Numbers 21
Intrusion 19
Last External Number Redial 17
Make calls 15
P
Password protection 37
Personal Greeting 39
Placing the telephone 72
R
Refer Back 26
Reminder 54
Ringing signal 60
77
Index
S
Save information 36
Security 46
Block extension 48
Bypass blocked extension 47
Change Password 46
Send Message 44
Settings 59
Flash time 65
Handset and loudspeaker volume 59
Headset 64
Hearing aid compatibility 63
Message Waiting indication 63
Ringing signal 60
Signals 12
78
T
Tandem configuration 52
Tones 11
Transfer 27
Troubleshooting 73
Fault check list 73
U
Useful Hints 67
W
Wall mounting 71
Warranty 5
Welcome 4
BusinessPhone – Analog Telephone
Quick Reference Guide
Answer calls
Diverted extension
Answer:
Lift handset
Answer on another
extension:
Lift handset
Ext. No.
#
Bypass Call Forwarding: Lift handset
Ext. No.
6
Transfer
Make calls
Transfer a call:
Internal calls:
Lift handset
External calls:
Lift handset
Line access code
External No.
Ext. No.
Common
Abbreviated Number:
Lift handset
Abbreviated No.
Individual Abbreviated
Number:
Lift handset
Abbreviated No.
Last external
number redial:
***
**
Lift handset
Messages
Call Me:
Voice:
09
-
You get busy tone or no answer
Automatic Callback:
Camp-on:
Intrusion:
Inquiry
Ongoing conversation:
Refer Back
Switch between calls:
To terminate:
Conference
Ongoing
conversation:
5
Replace handset
Lift handset when called
back
4
8
Keep handset off hook
Re-record:
Send:
Receive messages:
Call Forwarding
Call 3rd party
¸
¸
2
1
3
Call 3rd party
(To establish)
Replace handset (To leave)
?
¸
Call 3rd party
Replace handset
Before or after answer)
9#
99
*
9
#
Speak
Speak
Lift handset
Lift handset
Internal Diversion:
Lift handset
New No.
Cancel:
Cancel:
External Diversion:
*59#
*21#
*21*
#
#21#
*21*
*
#
#21*
#
Fixed Diversion:
Follow-me:
¸
¸
¸
Play-back:
*60*
Lift handset
Lift handset
New No.
Own No.
Lift handset
Own No.
*22*
#
#22#
*22*#
Program:
Lift handset
Line access code
External No.
Cancel:
Lift handset
Re-activate:
Lift handset
All rights reserved.
Ericsson Enterprise AB
For questions regarding the product,
please contact your Ericsson Enterprise Certified Sales Partner.
Also visit us on www.ericsson.com/enterprise
© Ericsson Enterprise AB 2003
EN/LZTBS 160 1300 R1A
Printed on chlorine free paper.
Ericsson is shaping the future of Mobile and Broadband Internet communications through its
continuous technology leadership. Providing innovative solutions in more than 140 countries,
Ericsson is helping to create the most powerful communication companies in the world.

Loading…