-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Operating instructions
Floor thermostat
Art. no. FTR231
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
kundencenter@jung.de
16.09.2022
82404903 J0082404903
www.jung.de
Related Manuals for Jung FTR231
Summary of Contents for Jung FTR231
-
Page 1
Operating instructions Floor thermostat Art. no. FTR231 ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de 16.09.2022 82404903 J0082404903 www.jung.de… -
Page 2: Table Of Contents
Floor thermostat Table of Contents Safety instructions …………………. 3 Device components…………………. 3 Intended use …………………… 3 Product characteristics …………………. 4 Functional description ………………….. 4 Operation …………………….. 4 Information for electrically skilled persons ……………. 5 Commissioning …………………. 7 Technical data …………………… 8 Warranty…………………….. 9 82404903 2 / 9 16.09.2022 J0082404903…
-
Page 3: Safety Instructions
Floor thermostat Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. Danger of electric shock. Always disconnect before carrying out work on the device or load.
-
Page 4: Product Characteristics
Floor thermostat Product characteristics – Manually setting a comfort temperature for the floor – Manually switching off the temperature control – Input terminal for activation of reduction temperature (ECO) via central clock – External temperature sensor (remote sensor) – Frost protection function –…
-
Page 5: Information For Electrically Skilled Persons
Floor thermostat Indication of the current operating mode ￭ Press the control knob briefly. The LED lights up for 10 seconds in the colour of the current operating mode. Orange = frost protection, red = heating mode. Switching off the temperature control ￭…
-
Page 6
Floor thermostat DANGER! Mortal danger of electric shock. Disconnect the device. Cover up live parts. Connecting and fitting the device Recommended installation height: 1.50 m. Image 2: Connection example of the insert Image 3: Clampable conductor cross-section External temperature sensor (remote sensor) Switching contact of central clock Electric underfloor heating ￭… -
Page 7: Commissioning
Floor thermostat ￭ Fit device in appliance box; terminals must be at the bottom. ￭ Fit the frame, central plate and control knob. ￭ Switch on mains voltage. Commissioning Setting control behaviour Factory setting: pulse width modulated control (PWM) This setting can be used with most heating systems without adaptation. Changing the settings ￭…
-
Page 8: Technical Data
Floor thermostat Image 4: Setting the temperature limit (before/after) ￭ Pull the control knob off the central plate so that the adjustment rings are vis- ible Bild. Pulling off is done by hand or with a suitable tool, e.g. vacuum lifting tool or key cap puller.
-
Page 9: Warranty
4 m (can be extended to 50 m) Degree of protection IP 67 Warranty The warranty is provided in accordance with statutory requirements via the specialist trade. ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de…
Temperature Management Floor heating controller
Ref.-no.: ..FTR 231 ..
Operating Instructions
Floor heating controller
1. Area of application
Used in domestic electrical installations to regulate electrical floor heating
systems and temperature control systems.
2. Function
The floor heating controller consists of two parts:
• Control unit for setting the required floor temperature
• Remote sensor in the floor for monitoring the set temperature
Control unit:
Using the setting knob, set the required temperature for your floor. The
numbers – 6 on the knob correspond to a temperature range of 10 – 50
°C.
Note the setting instructions from the manufacturer of your floor heating
system.
If the temperature in the floor falls below the temperature you have set,
the control unit requests heat; this state is displayed by the red LED
above the setting knob. You can therefore see if your heating is using
energy.
A range restriction can also be carried out in the setting knob.
The operating state of your floor heating is switched on or off with the
mains switch 0 – I.
You also have the option of programming a temperature reduction via an
external time switch e.g. during the night.
If you have installed this type of time switch, the temperature reduction is
indicated by the green LED above the setting knob. The temperature
reduction is approx. 5 °C.
Example: The temperature set by you on the control unit is 34 °C
(number on dial = 4). This means that the temperature in the floor e.g.
during the night can drop down to 29 °C without your heating switching
itself on.
Stand: Apr-08 240 9090 1
На основании действующих законов РФ в сфере охраны и регламентации прав потребителей наш покупатель
вправе
заменить непродовольственный товар с безупречными характеристиками в срок до 14 дней, со дня его
приобретения.
Наш магазин электротоваров заменит вашу покупку, если товар, что предстоит заменить, не
использовался, его
внешний вид и потребительные свойства остались неизменными, остались без изменения все пломбы,
маркеры и
ярлыки производителя, а также товарный, или кассовый чек на приобретенный товар.