Тойота камри 2016 руководство по эксплуатации

Ознакомьтесь с правилами эксплуатации вашего автомобиля Toyota, изучив электронную версию руководства.

На данной странице представлены следующие типы руководств:

  • Общее руководство для владельца
  • Руководство по мультимедиа и навигации
  • Руководство по вождению в условиях бездорожья

16

Указатель иллюстраций

Приборная панель

Замок запуска двигателя . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 164, 166
Пуск двигателя/изменение положений или режимов. . . . . . стр. 164, 167
Аварийное выключение двигателя . . . . . . . . . . . . . . . . . . . . . . . . стр. 369
Когда двигатель не запускается . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 401
Предупреждающие сообщения

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . стр. 382

Рычаг переключения передач . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 171
Переключение включенной передачи. . . . . . . . . . . . . . . . . . . . . . стр. 171
Меры предосторожности при буксировке. . . . . . . . . . . . . . . . . . . стр. 371
Когда рычаг переключения передач не перемещается. . . . . . . . стр. 403

Приборы. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 76
Показания приборов/регулировка подсветки панели
приборов . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 76
Сигнальные лампы/индикаторы . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 72
Когда загораются сигнальные лампы . . . . . . . . . . . . . . . . . . . . . . стр. 379
Многофункциональный информационный дисплей. . . . . . . . стр. 80
Дисплей . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 80
Когда отображается предупреждающее сообщение
или индикатор . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 382

1

2

3

17

Указатель иллюстраций

Стояночный тормоз . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 175
Затягивание/отпускание. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 175
Меры предосторожности зимой . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 222
Сигнальная лампа/зуммер/сообщение. . . . . . . . . . . . . . . . . стр. 379, 383

Рычаг переключателя указателей поворота . . . . . . . . . . . . . . стр. 174
Переключатель фар. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 176
Фары/передние габаритные фонари/задние фонари/
дневные ходовые фонари . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 176
Передние противотуманные фары/
задние противотуманные фонари. . . . . . . . . . . . . . . . . . . . . . . . . стр. 186

Переключатель передних стеклоочистителей
и омывателя . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 187
Использование . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 187
Добавление жидкости омывателя . . . . . . . . . . . . . . . . . . . . . . . . . стр. 336

Выключатель ламп аварийной сигнализации . . . . . . . . . . . . стр. 368

Механизм открывания багажника . . . . . . . . . . . . . . . . . . . . . . . стр. 105

Привод лючка топливного бака. . . . . . . . . . . . . . . . . . . . . . . . . стр. 193

Рычаг разблокировки капота . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 321

Рычаг регулировки угла наклона и вылета рулевой
колонки

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 135

Переключатель регулировки угла наклона
и вылета рулевой колонки

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 135

Функция памяти положения сиденья водителя

*

1

. . . . . . . . . . . . стр. 128

Система кондиционирования воздуха . . . . . . . . . . . . . . . . . . . стр. 260
Использование . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 260
Обогреватель заднего стекла . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 263

Аудиосистема

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 226

Мультимедийная система

*

1, 2

Система навигации

*

1, 2

Перчаточный ящик . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 276

Часы . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 284

*

1

: При наличии

*

2

: См. “Руководство для владельца по системе навигации и мультимедийной

системе”.

4

5

6

7
8
9

10

11

12

13

14

15
16

18

Указатель иллюстраций

Переключатели

Переключатель AFS OFF

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 178

Регулятор корректора фар

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 177

Переключатель датчика системы помощи при парковке
Toyota

*

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 201

Переключатель очистителя фар

*

1

. . . . . . . . . . . . . . . . . . . . . . стр. 192

Главный переключатель системы BSM (система контроля
мертвых зон)

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 213

Переключатель VSC OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 209, 210

Переключатели функции памяти положения сиденья
водителя

*

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 128

Переключатели наружных зеркал заднего вида . . . . . . . . . . стр. 139
Функция памяти положения сиденья водителя

*

1

. . . . . . . . . . . . стр. 128

Переключатель блокировки стекол . . . . . . . . . . . . . . . . . . . . . стр. 142

Переключатели блокировки дверей . . . . . . . . . . . . . . . . . . . . . . стр. 99

Переключатели управления
электростеклоподъемниками . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 142

1
2
3

4
5

6
7

8

9

10

11

19

Указатель иллюстраций

Переключатели дистанционного управления
аудиосистемой

*

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . стр. 227

Переключатели управления приборами . . . . . . . . . . . . . . . . . . стр. 81

Переключатель круиз-контроля

*

1

. . . . . . . . . . . . . . . . . . . . . . . стр. 197

Переключатели телефона

*

1, 2

Переключатель голосового управления

*

1, 2

*

1

: При наличии

*

2

: См. “Руководство для владельца по системе навигации и мультимедийной

системе”.

Тип A

Тип B

1

2
3
4
5

Toyota CAMRY 2016 Owner's Manual

  1. Manuals
  2. Brands
  3. Toyota Manuals
  4. Automobile
  5. CAMRY 2016
  6. Owner’s manual

  • Contents

  • Table of Contents

  • Troubleshooting

  • Bookmarks

Quick Links

I n f o r ma t i o n P r o v i d e d b y :

loading

Related Manuals for Toyota CAMRY 2016

Summary of Contents for Toyota CAMRY 2016

  • Page 1
    I n f o r ma t i o n P r o v i d e d b y :…
  • Page 2
    I n f o r ma t i o n P r o v i d e d b y :…
  • Page 3
    Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
  • Page 4: Table Of Contents

    TABLE OF CONTENTS For your information……. 8 Operation of each Reading this manual ….12 component How to search……13 Pictorial index ……14 3-1. Key information Keys……..92 For safety and security 3-2. Opening, closing and locking the doors Doors ……..

  • Page 5
    4-5. Using the driving Driving support systems Cruise control ….181 Dynamic radar cruise 4-1. Before driving control……186 Driving the vehicle….. 140 Cargo and luggage…. 147 (Lane Departure Alert)..199 Vehicle load limits ….. 150 Rear view monitor Trailer towing….. 151 system ……
  • Page 6
    TABLE OF CONTENTS 5-5. Playing an audio CD and Audio system MP3/WMA/AAC discs CD player operation…261 5-6. Using an external 5-1. Basic Operations device Audio system types … 240 Listening to an iPod …267 Audio system….. 242 Listening to a USB Steering wheel audio memory device ….271 switches ……
  • Page 7
    ® 5-8. Bluetooth Audio Interior features ® Listening to Bluetooth Audio ……. 288 ® 5-9. Bluetooth phone 6-1. Using the air conditioning ® Using a Bluetooth system and defogger Phone……289 Manual air conditioning Making a call ….. 291 system ……326 Automatic air conditioning Receiving a call ….
  • Page 8
    TABLE OF CONTENTS Maintenance and care When trouble arises 7-1. Maintenance and care 8-1. Essential information Cleaning and protecting Emergency flashers…438 the vehicle exterior..374 If your vehicle has to Cleaning and protecting be stopped in an the vehicle interior… 377 emergency…….
  • Page 9
    Vehicle specifications Index 9-1. Specifications What to do if… (Troubleshooting)…..548 Maintenance data (fuel, oil level, etc.) ..498 Alphabetical index ……552 Fuel information ….507 Tire information ….510 9-2. Customization Customizable features ..523 9-3. Items to initialize Items to initialize….532 For owners Reporting safety defects for U.S.
  • Page 10: For Your Information

    Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.

  • Page 11
    ● Usage of data collected through Safety Connect (U.S.mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
  • Page 12: Event Data Recorder

    EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •…

  • Page 13
    Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
  • Page 14: Reading This Manual

    Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.

  • Page 15: How To Search

    How to search Searching by name ■ • Alphabetical index ..P. 552 Searching installation ■ position • Pictorial index….P. 14 Searching by symptom or ■ sound • What to do if… (Troubleshooting) ..P. 548 Searching by title ■ • Table of contents …..P. 2 I n f o r ma t i o n P r o v i d e d b y :…

  • Page 16: Pictorial Index

    Pictorial index Pictorial index ■ Exterior Doors ……….P. 99 Locking/unlocking .

  • Page 17
    Pictorial index Windshield wipers ……. . . P. 176 Precautions against winter season ….. P. 234 Fuel filler door .
  • Page 18: Instrument Panel

    Pictorial index ■ Instrument panel Engine switch……. . . P. 153, 155 Starting the engine/changing the positions or modes .

  • Page 19
    Pictorial index Parking brake ……..P. 165 Applying/releasing .
  • Page 20
    Pictorial index ■ Switches BSM (Blind Spot Monitor) main switch ….P. 226 VSC OFF switch ……. P. 215, 216 LDA (Lane Departure Alert) switch .
  • Page 21
    Pictorial index Audio remote control switches ….. P. 244 Telephone switches ……P. 301 Talk switch .
  • Page 22
    Pictorial index Wireless charger switch ……P. 347 Seat heater switches ……P. 337 : If equipped I n f o r ma t i o n P r o v i d e d b y :…
  • Page 23
    Pictorial index ■ Interior SRS airbags ……..P. 34 Floor mats.
  • Page 24
    Pictorial index Auxiliary boxes ……..P. 346 Moon roof switches .
  • Page 25
    For safety and security 1-1. For safe use Before driving…… 24 For safety drive ….26 Seat belts ……28 SRS airbags……34 Front passenger occupant classification system ..47 Safety information for children ……53 Child restraint systems..54 Installing child restraints..
  • Page 26: 1-1. For Safe Use

    1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.

  • Page 27
    When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●…
  • Page 28: For Safety Drive

    1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.

  • Page 29: Adjusting The Mirrors

    1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (→P. 127, 129) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●…

  • Page 30: Seat Belts

    1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.

  • Page 31
    1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
  • Page 32
    Toyota dealer free of charge. ■ Rear seat belt Use the seat belt after passing it through the guide if the seat belt comes free from the guide.
  • Page 33
    Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●…
  • Page 34
    ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
  • Page 35
    1-1. For safe use WARNING ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
  • Page 36: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆…

  • Page 37
    1-1. For safe use ◆ SRS side and curtain shield airbags SRS front side airbags Can help protect the torso of the front seat occupants SRS rear side airbags Can help protect the torso of occupants in the rear outer seats SRS curtain shield airbags ●…
  • Page 38
    1-1. For safe use SRS airbag system components Front impact sensors “AIR BAG ON” and “AIR BAG OFF” indicator lights Front passenger occupant classification system (ECU SRS warning light and sensors) Front passenger’s seat belt Knee airbags buckle switch Side impact sensors (front Airbag sensor assembly doors) Side impact sensors (rear)
  • Page 39
    1-1. For safe use WARNING ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
  • Page 40
    An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
  • Page 41
    1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
  • Page 42
    1-1. For safe use WARNING ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and knee airbags deploy.
  • Page 43
    If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillars garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger’s seat.
  • Page 44
    Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
  • Page 45
    1-1. For safe use ■ If the SRS airbags deploy (inflate) ●Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ●A loud noise and white powder will be emitted. ●Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rails, may be hot for several minutes.
  • Page 46
    1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS side and curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
  • Page 47
    1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
  • Page 48
    When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ●Any of the SRS airbags have been inflated. ●The front of the vehicle is damaged or…
  • Page 49: Front Passenger Occupant Classification System

    1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. SRS warning light Seat belt reminder light “AIR BAG OFF”…

  • Page 50
    1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIR BAG ON” and “AIR BAG OFF” indi- “AIR BAG ON” cator lights Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag on the front…
  • Page 51
    1-1. For safe use Child restraint system with infant ■ “AIR BAG ON” and “AIR BAG OFF” indica- “AIR BAG tor lights OFF” Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Devices…
  • Page 52
    1-1. For safe use There is a malfunction in the system ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights OFF” Indicator/ warning light SRS warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seats Activated Devices…
  • Page 53
    1-1. For safe use WARNING ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
  • Page 54
    SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
  • Page 55: Safety Information For Children

    1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.

  • Page 56: Child Restraint Systems

    1-1. For safe use Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the LATCH anchors or the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.

  • Page 57
    1-1. For safe use Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing  Infant seat/con- Forward facing  Convertible vertible seat seat Booster seat ■…
  • Page 58
    ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 59
    1-1. For safe use WARNING ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death.
  • Page 60: Installing Child Restraints

    1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.

  • Page 61
    1-1. For safe use Installation with LATCH system Widen the gap between the seat cushion and seatback slightly. Type A Latch the hooks of the lower straps onto LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
  • Page 62
    1-1. For safe use Installing child restraints using a seat belt (child restraint lock function belt) Rear-facing  Infant seat/convertible seat ■ Place the child restraint sys- tem on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint system and insert the plate into the buckle.
  • Page 63
    1-1. For safe use While pushing child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 64
    1-1. For safe use While pushing child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 65
    1-1. For safe use Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Secure the child restraint sys- tem using the seat belt or LATCH anchors.
  • Page 66
    1-1. For safe use WARNING ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (→P. 30) ■…
  • Page 67
    1-1. For safe use WARNING ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
  • Page 68: Exhaust Gas Precautions

    Keep the trunk lid closed. ● If you smell exhaust gases in the vehicle even when the trunk lid is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking ●…

  • Page 69: Theft Deterrent System

    1-2. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.

  • Page 70
    1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ●If the grip portion of the key is in contact with a metallic object ●If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle ■…
  • Page 71: Alarm

    1-2. Theft deterrent system ∗ Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door or trunk is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key.

  • Page 72
    1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ●Nobody is in the vehicle. ●The windows and moon roof are closed before the alarm is set.
  • Page 73: Instrument Cluster

    Instrument cluster Instrument cluster Warning lights and indicators ……72 Gauges and meters …. 77 Multi-information display ..81 Fuel consumption information ……87 I n f o r ma t i o n P r o v i d e d b y :…

  • Page 74: Instrument Cluster Warning Lights And Indicators

    2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.

  • Page 75
    2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Electric power steering Brake system warning system warning light light (→P. 446) (→P. 447) (U.S.A.) 1, 2, 3 Brake system warning Pre-collision system light (→P.
  • Page 76
    There may be a mal- function in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : If equipped : The light turns on when the system is turned off.
  • Page 77
    2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Cruise control “SET” (→P. 164) indicator (→P. 181) 1, 2, 5 Headlight indicator Pre-collision system (→P. 166) warning light (→P. 219) (U.S.A.) LDA (Lane Departure 2, 4…
  • Page 78
    Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
  • Page 79: Gauges And Meters

    2. Instrument cluster Gauges and meters Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. Displays warning messages in case of a malfunction (→P. 454) Outside temperature display Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C).

  • Page 80
    2. Instrument cluster Changing the odometer/trip meter display Pressing the display change but- ton changes the display as fol- lows. Odometer ■ Displays the total distance the vehicle has been driven. Trip meter A /trip meter B ■ Displays the distance the vehicle has been driven since the meter was last reset.
  • Page 81
    2. Instrument cluster ■ Eco driving indicator light During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. When the acceleration exceeds the Eco driving accelerator upper limit, or the vehicle is stopped, the light turns off. Eco Driving Indicator Light will not operate in the following conditions: ●The shift lever is in anything other than ●The paddle shift switch is used.
  • Page 82
    2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. ● The engine may be overheating if the engine coolant temperature gauge is in the red zone (H).
  • Page 83: Multi-Information Display

    2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (→P. 82) Some of the information may be displayed automatically depending on the situation.

  • Page 84
    2. Instrument cluster Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (→P. 454) Settings display Select to change the meter display settings. (→P. 84) Operating the meter control switches ■ Scroll up/down the screen and move up/down the cur- Switch menu…
  • Page 85: Drive Information

    2. Instrument cluster Drive information 1, 2 ● Average fuel economy /Tank average fuel economy /Trip aver- age fuel economy Displays the average fuel consumption since the function was reset, the vehicle was refueled, and the engine was started, respec- tively Use the displayed average fuel consumption as a reference.

  • Page 86
    2. Instrument cluster Settings display Changing the settings ■ Select using the meter control switch. Select an item and then set it with the center button. Customizable items ■ ● Language Select to change the language displayed on the multi-information display.
  • Page 87
    2. Instrument cluster ● Maintenance system (U.S.A.) Select to reset the message after the required maintenance is performed. ( → P. 381) ● Initialization Registered or changed meter settings will be deleted or returned to their default setting. : Speed limit display may not be available for some regions. ■…
  • Page 88
    2. Instrument cluster WARNING ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display.
  • Page 89: Fuel Consumption Information

    2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the Entune Audio system and/or the navigation system. Entune Audio system or naviga- tion system CTY20BJ045 Trip information Entune Audio system with “CAR” button Press the “CAR” button. If the “Past Record”…

  • Page 90
    2. Instrument cluster Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since the engine was started Fuel consumption in the past 15 minutes Cruising range (→P. 89) Current fuel consumption Vehicles without a smart key system: Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to the “ON”…
  • Page 91
    2. Instrument cluster Past record Entune Audio system with “CAR” button Press the “CAR” button. If the “Trip Information” screen is displayed, select “Past Record”. Entune Audio system or navigation system with “APPS” button Press the “APPS” button. Touch “Eco” on the “Apps” screen. If the “Trip Information”…
  • Page 92
    2. Instrument cluster I n f o r ma t i o n P r o v i d e d b y :…
  • Page 93: Operation Of Each Component

    Operation of each component 3-1. Key information Keys ……..92 3-2. Opening, closing and locking the doors Doors ……..99 Trunk……… 107 Smart key system ….. 112 3-3. Adjusting the seats Front seats ……119 Rear seats……121 Head restraints….123 3-4.

  • Page 94: 3-1. Key Information

    3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart key system (type A) Master keys Operating the wireless remote con- trol function (→P. 93) Valet key Key number plate Vehicles without a smart key system (type B) Master keys Operating the wireless remote con- trol function (→P.

  • Page 95
    (if equipped) (→P. 99) Opens the trunk (→P. 108) : This setting must be customized at your Toyota dealer. Vehicles without a smart key system (type B) Locks all the doors (→P. 99) Unlocks all the doors (→P. 99) Pressing the button unlocks the driver’s door.
  • Page 96
    (→P. 99) Opens the trunk (→P. 108) Sounds the alarm (→P. 95) : This setting must be customized at your Toyota dealer. Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, push the release button and take the key out.
  • Page 97
    ■ If you lose your keys New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or the other mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate.
  • Page 98
    3-1. Key information ■ Conditions affecting operation Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ●When the wireless key battery is depleted ●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electrical noise ●When carrying a portable radio, cellular phone or other wireless communi-…
  • Page 99
    If a wrong key is used (vehicles with a smart key system) The key cylinder rotates freely to isolate inside mechanism. ■ Customization that can be configured at Toyota dealer Settings (e. g. smart key system) can be changed. (Customizable features: →P. 523) ■…
  • Page 100
    When an electronic key is lost (vehicles with a smart key system) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
  • Page 101: Doors

    Type B driver’s window and moon roof. (→P. 132, 135) : This setting must be customized at your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 102
    Press and hold to open the driver’s window and moon roof. (→P. 132, 135) : This setting must be customized at your Toyota dealer. ◆ Turning the key operates the doors as follows: Vehicles without a smart key system…
  • Page 103
    3-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Driver’s window and moon roof: A buzzer sounds to indicate that the driver’s window and moon roof are open- ing.
  • Page 104
    3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
  • Page 105
    3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
  • Page 106
    3-2. Opening, closing and locking the doors Setting and canceling the functions ■ The automatic door locking and unlocking functions can be set or canceled on the audio system screen (→P. 523) or by following the procedure below. Vehicles without a smart key system: Close all the doors and switch the engine switch to the “ON”…
  • Page 107
    3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator light on the key surface is not on, press and hold for approximately 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
  • Page 108
    3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●…
  • Page 109: Trunk

    3-2. Opening, closing and locking the doors Trunk The trunk can be opened using the trunk opener, entry function, wireless remote control. Opening the trunk from inside the vehicle Pull up the lever to release the trunk lid. Opening the trunk from outside the vehicle ◆…

  • Page 110
    3-2. Opening, closing and locking the doors ◆ Wireless remote control Vehicles without a smart key system Press and hold the switch. Type A Type B Vehicles with a smart key system Press and hold the switch. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 111
    3-2. Opening, closing and locking the doors ■ Operation signal A buzzer sounds to indicate that the trunk has been opened. ■ Trunk light The trunk light turns on when the trunk is opened. ■ Function to prevent the trunk being locked with the electronic key inside (vehicles with a smart key system) ●When all doors are being locked, closing the trunk lid with the electronic key left inside the trunk will sound an alarm.
  • Page 112
    3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving ● Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the trunk may be thrown out, causing an accident.
  • Page 113
    ● Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.
  • Page 114: Smart Key System

    3-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) ● Locks and unlocks the doors (→P. 99) ●…

  • Page 115
    3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the front outside door handles.
  • Page 116
    3-2. Opening, closing and locking the doors Alarm Situation Correction procedure An attempt was made to lock either front door by opening a door and Interior alarm pings Retrieve the electronic putting the inside lock once and exterior alarm key from the vehicle button into the lock sounds once for 5 sec- and lock the doors…
  • Page 117
    3-2. Opening, closing and locking the doors ■ Electronic Key Battery-Saving Function When battery-saving mode is set, battery depletion is minimized by stopping the electronic key from receiving radio waves. Press twice while pressing and holding . Confirm that the electronic key indicator flashes 4 times.
  • Page 118
    3-2. Opening, closing and locking the doors ■ Note for the entry function ●Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
  • Page 119
    3-2. Opening, closing and locking the doors ●If the electronic key is inside the vehicle and a door handle becomes wet during a car wash, a message may be shown on the multi-information dis- play and a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.
  • Page 120
    (→P. 112) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
  • Page 121: Adjusting The Seats

    3-3. Adjusting the seats Front seats Adjustment procedure Manual seat Seat position adjustment lever Vertical height adjustment lever (driver’s side only) Seatback angle adjustment lever Power seat Seat position adjustment Vertical height adjustment switch switch (driver’s side only) Seatback angle adjustment Lumbar support adjustment switch switch (driver’s side only)

  • Page 122
    3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.
  • Page 123: Rear Seats

    3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks Pull the seatback lever in the trunk for the seatback you wish to fold down. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 124
    3-3. Adjusting the seats WARNING ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
  • Page 125: Head Restraints

    3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment Pull the head restraint up. Down Push the head restraint down while pressing the lock release button. Lock release button ■ Removing the head restraints (front seats) Pull the head restraint up while pressing the lock release button.

  • Page 126
    3-3. Adjusting the seats ■ Adjusting the height of the head restraints (front seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. WARNING ■ Head restraint precautions (front seats) Observe the following precautions regarding the head restraints.
  • Page 127: Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.

  • Page 128
    3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. ■…
  • Page 129: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.

  • Page 130
    3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
  • Page 131: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, press the switch. Left Right To adjust the mirror, press the switch. Right Down Left Folding the mirrors Push the mirror back in the direc- tion of the vehicle’s rear.

  • Page 132
    3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The engine switch is in ACCESSORY or IGNITION ON mode. ■…
  • Page 133: Opening And Closing

    3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing (front side windows only) Opening One-touch opening (front side windows only) : To stop the window partway, oper- ate the switch in the opposite direc-…

  • Page 134
    If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■…
  • Page 135
    3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
  • Page 136: Moon Roof

    3-5. Opening and closing the windows ∗ Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing Opens the moon roof The moon roof stops slightly before the fully open position to reduce wind noise.

  • Page 137
    3-5. Opening and closing the windows ■ The moon roof can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The engine switch is in IGNITION ON mode. ■…
  • Page 138
    Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. ■ Moon roof open warning buzzer…
  • Page 139
    3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may cause death or serious injury. ■ Opening the moon roof ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
  • Page 140
    3-5. Opening and closing the windows I n f o r ma t i o n P r o v i d e d b y :…
  • Page 141: Driving

    Driving 4-1. Before driving 4-3. Operating the lights and wipers Driving the vehicle….. 140 Headlight switch….166 Cargo and luggage … 147 Automatic High Beam ..170 Vehicle load limits ….. 150 Windshield wipers and Trailer towing….. 151 washer ……176 Dinghy towing ….

  • Page 142: Driving The Vehicle

    4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 153, 155 Driving With the brake pedal depressed, shift the shift lever to D. (→P. 160) Release the parking brake. (→P. 165) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.

  • Page 143
    Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Toyota dealer per- form the bedding down operation.
  • Page 144
    4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ■…
  • Page 145
    If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
  • Page 146
    4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine. If the shift lever is any position other than P or N, the vehicle may acceler- ate suddenly and unexpectedly, causing an accident.
  • Page 147
    4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Always apply the parking brake, shift the shift lever to P, stop the engine and lock the vehicle.
  • Page 148
    Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●…
  • Page 149: Cargo And Luggage

    (→P. 150) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 150
    4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 498) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
  • Page 151
    4-1. Before driving WARNING ■ Things that must not be carried in the trunk The following things may cause a fire if loaded in the trunk: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
  • Page 152: Vehicle Load Limits

    Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ◆ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ◆ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.

  • Page 153: Trailer Towing

    Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.

  • Page 154: Dinghy Towing

    4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 155: Engine (Ignition) Switch (Vehicles Without A

    4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position and start the engine.

  • Page 156
    If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 157: Engine (Ignition) Switch (Vehicles With A Smart Key System)

    4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.

  • Page 158
    4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal released. (The mode changes each time the switch is pressed.) The emergency flashers can be used. The multi-information display will not be displayed.
  • Page 159
    If the engine does not start ●The engine immobilizer system may not have been deactivated. (→P. 67) Contact your Toyota dealer. ●Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
  • Page 160
    4-2. Driving procedures ■ If the electronic key battery is depleted →P. 420 ■ Operation of the engine switch ●When operating the engine switch, one short, firm press is enough. If the switch is pressed improperly, the engine may not start or the engine switch mode may not change.
  • Page 161
    Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
  • Page 162: Automatic Transmission

    4-2. Driving procedures Automatic transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. Vehicles with a smart key system: While the engine switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.

  • Page 163
    4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving S mode driving (→P. 161) : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
  • Page 164
    4-2. Driving procedures Shift ranges and their functions ■ ● The vehicle is allowed to shift up and down to provide the most suitable gear selection based on your driving situation. (e.g. S4: 1 to 4 or, 4 to 1) ●…
  • Page 165
    S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.) ■…
  • Page 166: Turn Signal Lever

    4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.

  • Page 167: Parking Brake

    4-2. Driving procedures Parking brake Operating instructions To set the parking brake, fully depress the parking brake pedal with your left foot while depress- U.S.A. Canada ing the brake pedal with your right foot. (Depressing pedal again releases the parking brake.) ■…

  • Page 168: Headlight Switch

    4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: The headlights, day- time running lights (→P. 167) and all the lights listed below turn on and off automatically.

  • Page 169
    4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
  • Page 170
    4-3. Operating the lights and wipers ■ Automatic light off system Vehicles without a smart key system ●When the headlights are on: The headlights and tail lights turn off 30 sec- onds after the engine switch is turned to the “ACC” or “LOCK” position and a door is opened and closed.
  • Page 171
    4-3. Operating the lights and wipers ■ Battery-saving function In the following conditions, the remaining lights will go off automatically after 20 minutes in order to prevent the vehicle battery from being discharged: ●The headlights and/or tail lights are on. ●Vehicles without a smart key system: The engine switch is in the “ACC”…
  • Page 172: Automatic High Beam

    4-3. Operating the lights and wipers ∗ Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. Activating the Automatic High Beam system Turn the headlight switch to Push the lever away from you.

  • Page 173
    4-3. Operating the lights and wipers High beam automatic turning on or off conditions When all of the following conditions are fulfilled, high beam will be automatically turned on: ● Vehicle speed is above approximately 21 mph (34 km/h). ● The area ahead of the vehicle is dark. ●…
  • Page 174
    4-3. Operating the lights and wipers ■ The Automatic High Beam can be operated when The engine switch is in IGNITION ON mode. ■ Camera sensor detection information ●High beam may not be automatically turned off in the following situations: •…
  • Page 175
    4-3. Operating the lights and wipers ●In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestrians to the high beam. Therefore, you should consider turning the high beams on or off manually rather than relying on the Automatic High Beam system.
  • Page 176
    4-3. Operating the lights and wipers ■ If a warning message for the Automatic High Beam is shown on the multi-information display It may indicate a malfunction in the system. Contact your Toyota dealer. ■ Customization The Automatic High Beam can be deactivated.
  • Page 177
    Do not overload the vehicle. ● Do not modify the vehicle. ● If the windshield needs to be replaced, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 178: Windshield Wipers And Washer

    4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted. Intermittent windshield wiper operation Low speed windshield…

  • Page 179
    ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 180: 4-4. Refueling

    4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Close all the doors and windows, and turn the engine switch off. ● Confirm the type of fuel. (→P. 507) ■…

  • Page 181
    4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
  • Page 182
    WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
  • Page 183: Cruise Control

    4-5. Using the driving support systems ∗ Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Display Indicators Set speed Cruise control switch ∗ : If equipped I n f o r ma t i o n P r o v i d e d b y :…

  • Page 184
    4-5. Using the driving support systems Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will be dis- played on the multi-information dis- play. Press the button again to deacti- vate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set…
  • Page 185
    4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
  • Page 186
    Have the vehicle inspected by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 187
    4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
  • Page 188: Dynamic Radar Cruise Control

    4-5. Using the driving support systems ∗ Dynamic radar cruise control Summary of functions Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle dis- tance control mode, the vehicle automatically accelerates or deceler- ates in order to maintain a set following distance from vehicles ahead. Vehicle-to-vehicle distance but- Indicators Set speed…

  • Page 189
    4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will be displayed. Press the button again to deacti- vate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set…
  • Page 190
    4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
  • Page 191
    4-5. Using the driving support systems Changing the vehicle-to-vehicle distance Pressing the button changes the Preceding vehicle-to-vehicle distance as fol- vehicle mark lows: Long Medium Short Preceding vehicle mark The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION ON mode.
  • Page 192
    4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
  • Page 193: Approach Warning

    4-5. Using the driving support systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.

  • Page 194
    4-5. Using the driving support systems Selecting conventional constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to dirt etc.
  • Page 195
    ●The windshield wipers are operating at high speed (when the wiper switch is set to the high speed wiper operation position). If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer. ■…
  • Page 196
    4-5. Using the driving support systems ■ Radar sensor and grille cover Always keep the sensor and grille cover clean to ensure that the vehicle-to- vehicle distance control operates properly. (Some obstructions, such as snow, ice and plastic objects, cannot be detected by the obstruction sensor.) Dynamic radar cruise control is canceled if an obstruction is detected.
  • Page 197
    4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes etc.
  • Page 198
    4-5. Using the driving support systems WARNING ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
  • Page 199
    4-5. Using the driving support systems WARNING ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ● When your vehicle is pointing upwards (caused by a heavy load in the trunk, etc.) ■…
  • Page 200
    Do not modify or paint the sensor and grille cover. ● If the radar sensor needs to be replaced, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 201: (Lane Departure Alert)

    4-5. Using the driving support systems ∗ LDA (Lane Departure Alert) Summary of function While driving on a road that has lane markers, this system recognizes the lane markers using a camera as a sensor to alert the driver when the vehicle deviates from its lane.

  • Page 202
    4-5. Using the driving support systems Operating conditions ● When the vehicle speed is approximately 32 mph (50 km/h) or more ● When the lane width is more than approximately 8.2 ft. (2.5 m) ● When driving on a straight road or through a curve with a radius of more than approximately 328 ft.
  • Page 203
    4-5. Using the driving support systems ■ Temporary cancelation of the LDA system functions If any of the following occurs, the LDA system functions will be temporarily canceled. The functions will resume after the necessary operating conditions have returned. ●The turn signal lever is operated. ●The vehicle speed deviates from the operating range of the LDA system functions.
  • Page 204
    4-5. Using the driving support systems ■ Conditions in which the function may not operate correctly In the following situations, the camera sensor may be unable to recognize lane markers causing the lane departure warning function to operate incor- rectly. However, this does not indicate a malfunction. ●When driving through an area with no lane markers, such as a tollbooth, a crossing or before a ticket checkpoint ●When driving on a sharp curve…
  • Page 205
    4-5. Using the driving support systems WARNING ■ Before using the LDA system Do not rely solely on the LDA system. The LDA system does not drive the vehicle automatically, nor does it reduce the amount of care you need to take.
  • Page 206
    Do not subject the camera sensor to strong impact or force, and do not disassemble the camera sensor. ● If the windshield needs to be replaced, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 207: Rear View Monitor System

    4-5. Using the driving support systems Rear view monitor system The rear view monitor system assists the driver by displaying guide lines and an image of the view behind the vehicle while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.

  • Page 208
    4-5. Using the driving support systems Using the rear view monitor system Screen description ■ Vehicle width guide lines The line indicates a guide path when the vehicle is being backed straight up. The displayed width is wider than the actual vehicle width. Vehicle center guide lines These lines indicate the estimated vehicle center on the ground.
  • Page 209
    4-5. Using the driving support systems Rear view monitor system precautions Area displayed on screen ■ The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. To adjust the image on the rear view monitor system screen.
  • Page 210
    4-5. Using the driving support systems Differences between the screen and the actual road ■ The distance guide lines and the vehicle width guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually. The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so.
  • Page 211
    4-5. Using the driving support systems ● When any part of the vehicle sags When any part of the vehicle sags due to the number of pas- sengers or the distribution of the load, there is a margin of error between the fixed guide lines on the screen and the actual distance/course on the A margin of error…
  • Page 212
    4-5. Using the driving support systems Vehicle width guide lines ■ Visually check the surroundings and the area behind the vehicle. In the case shown below, the truck appears to be outside of the vehi- cle width guide lines and the vehicle does not look as if it hits the truck.
  • Page 213
    If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution The image is difficult to see •…
  • Page 214
    4-5. Using the driving support systems WARNING ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to check visually behind and all around the vehicle before proceeding.
  • Page 215
    ● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 216: Driving Assist Systems

    4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.

  • Page 217
    4-5. Using the driving support systems When the TRAC/VSC systems are operating The slip indicator light will flash while the TRAC/VSC systems are operating. Disabling the TRAC system If the vehicle gets stuck in mud, dirt or snow, the TRAC system may reduce power from the engine to the wheels.
  • Page 218
    When the message is displayed on the multi-information display show- ing that TRAC has been disabled even if has not been pressed TRAC cannot be operated. Contact your Toyota dealer. ■ Sounds and vibrations caused by the ABS, brake assist, TRAC and VSC systems ●A sound may be heard from the engine compartment when the brake pedal…
  • Page 219
    4-5. Using the driving support systems ■ Automatic reactivation of TRAC and VSC systems After turning the TRAC and VSC systems off, the systems will be automati- cally re-enabled in the following situations: ●When the engine switch is turned off ●If only the TRAC system is turned off, the TRAC will turn on when vehicle speed increases If both the TRAC and VSC systems are turned off, automatic re-enabling will…
  • Page 220
    The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
  • Page 221: (Pre-Collision System)

    4-5. Using the driving support systems ∗ PCS (Pre-Collision System) When the radar sensor detects possibility of a frontal collision, brakes are automatically engaged to lessen impact as well as vehicle damage. The alert timing for the pre-collision system can be changed or turned on/off, as necessary, by operating the switch.

  • Page 222
    4-5. Using the driving support systems Changing the pre-collision system Changing the alert timing of the pre-collision system ■ Each time the PCS switch is pressed, the response to the distance changes as follows. Middle Near : Default setting Turning off the pre-collision system ■…
  • Page 223
    4-5. Using the driving support systems ■ The pre-collision system is operational when The pre-collision system is on (→P. 220) and the following conditions are met: ●Pre-collision warning: • Vehicle speed is greater than approximately 10 mph (15 km/h). • The speed at which your vehicle is approaching the obstacle or the vehi- cle running ahead of you is greater than approximately 7 mph (10 km/h).
  • Page 224
    4-5. Using the driving support systems ■ Obstacles not detected The sensor cannot detect plastic obstacles such as traffic cones. There may also be occasions when the sensor cannot detect pedestrians, animals, bicy- cles, motorcycles, trees, or snowdrifts. ■ Situations in which the pre-collision system does not function properly The system may not function effectively in situations such as the following: ●On roads with sharp bends or uneven surfaces ●If a vehicle suddenly moves in front of your vehicle, such as at an intersec-…
  • Page 225
    4-5. Using the driving support systems ■ Certification For vehicles sold in the U.S.A. FCC ID : HYQDNMWR007 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 226
    Do not modify or paint the sensor and grille cover. ● If the radar sensor needs to be replaced, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 227
    4-5. Using the driving support systems WARNING ■ Cautions regarding the assist contents of the system By means of alarms and brake control, the pre-collision system is intended to assist the driver in avoiding collisions through the process of LOOK- JUDGE-ACT.
  • Page 228: (Blind Spot Monitor)

    4-5. Using the driving support systems ∗ BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The Blind Spot Monitor function Assists the driver in making the decision when changing lanes ●…

  • Page 229
    4-5. Using the driving support systems Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only) When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the rear seat. ■…
  • Page 230
    If the sensor moves even slightly off position, the system may mal- function and vehicles that enter the detection area may not be detected. If the sensor or surrounding area is subject to a strong impact, always have the area inspected by your Toyota dealer. ● Do not disassemble the sensor.
  • Page 231: The Blind Spot Monitor Function

    4-5. Using the driving support systems The Blind Spot Monitor function The Blind Spot Monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.

  • Page 232
    4-5. Using the driving support systems ■ Conditions under which the Blind Spot Monitor function will not detect a vehicle The Blind Spot Monitor function is not designed to detect the following types of vehicles and/or objects: ●Small motorcycles, bicycles, pedestrians etc. ●Vehicles traveling in the opposite direction ●Guardrails, walls, signs, parked vehicles and similar stationary objects ●Following vehicles that are in the same lane…
  • Page 233: The Rear Cross Traffic Alert Function

    4-5. Using the driving support systems The Rear Cross Traffic Alert function The Rear Cross Traffic Alert functions when your vehicle is in reverse. It can detect other vehicles approaching from the right or left rear of the vehicle. It uses radar sensors to alert the driver of the other vehi- cle’s existence through flashing the outside rear view mirror indicators and sounding a buzzer.

  • Page 234
    4-5. Using the driving support systems The Rear Cross Traffic Alert function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle…
  • Page 235
    4-5. Using the driving support systems ■ Conditions under which the Rear Cross Traffic Alert function may not function correctly The Rear Cross Traffic Alert function may not detect vehicles correctly in the following conditions: ●When ice or mud etc. is attached to the rear bumper ●During bad weather such as heavy rain, fog, snow etc.
  • Page 236: 4-6. Driving Tips

    4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.

  • Page 237
    4-6. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road con- ditions. When parking the vehicle Park the vehicle and move the shift lever to P without setting the park- ing brake.
  • Page 238
    NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
  • Page 239
    4-6. Driving tips I n f o r ma t i o n P r o v i d e d b y :…
  • Page 240: 5-1. Basic Operations

    5-1. Basic Operations Audio system types… 240 Audio system ….242 Steering wheel audio switches ……244 USB port/AUX port…. 245 Basic audio operations..247 5-2. Setup Setup menu……. 249 General settings….250 Audio settings ….252 Display settings….253 Voice settings….

  • Page 241: Using An External Device

    Audio system ® 5-4. Using the radio 5-8. Bluetooth Audio ® Radio operation….259 Listening to Bluetooth Audio……. 288 5-5. Playing an audio CD and ® MP3/WMA/AAC discs 5-9. Bluetooth phone ® CD player operation ..261 Using a Bluetooth Phone ……

  • Page 242: Audio System Types

    5-1. Basic Operations Audio system types Entune Audio Entune Audio Plus Owners of this system should refer to the “NAVIGATION AND MULTI- MEDIA SYSTEM OWNER’S MANUAL”. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 243
    5-1. Basic Operations Entune Premium Audio with Navigation Owners of this system should refer to the “NAVIGATION AND MULTI- MEDIA SYSTEM OWNER’S MANUAL”. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 244: Audio System

    5-1. Basic Operations ∗ Audio system Operations such as listening to audio, using the hands-free phone and changing multimedia system settings are started by using the following buttons. Audio system operation buttons “AUDIO” button Display the “Select Audio Source” screen or audio top screen. (→P.

  • Page 245
    5-1. Basic Operations Operating the touch screen By touching the screen with your finger, you can control the multime- dia system, etc. Drag ■ Touch the screen with your finger, and move the screen to the desired position. ● Scrolling the lists Flick ■…
  • Page 246: Steering Wheel Audio Switches

    5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of multimedia sys- tem or navigation system. For details, refer to the manual pro- vided with the multimedia system or navigation system.

  • Page 247: Usb Port/Aux Port

    5-1. Basic Operations USB port/AUX port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the audio source selection screen and the device can be operated via multimedia system. Connecting using the USB/AUX port iPod ■…

  • Page 248
    5-1. Basic Operations WARNING ■ While driving Do not connect a device or operate the device controls. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 249: Basic Audio Operations

    5-1. Basic Operations Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the multimedia system Press: Turns the multimedia system on and off. Turn: Adjusts the volume. Ejects a disc. Disc slot Pauses or resumes playing music.

  • Page 250
    5-1. Basic Operations WARNING ■ Laser product This product is a class 1 laser product. Do not open the cover of the player or attempt to repair the unit yourself. Refer servicing to qualified personnel. ● Laser products • Do not take this unit apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs.
  • Page 251: Setup Menu

    5-2.Setup Setup menu You can adjust the multimedia system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen ani- mation, etc. (→P. 250) Select to set the voice settings. (→P.

  • Page 252: General Settings

    The animation effect for the screen can be set to on/off. Select to delete personal data (→P. 251) Select to update program versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)

  • Page 253
    5-2. Setup Delete personal data Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. A confirmation screen will be displayed. Select “Yes”. The following personal data will be deleted or changed to its default settings.
  • Page 254: Audio Settings

    5-2. Setup Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations. Display Cover Art on/off Automatic Sound Levelizer (→P.

  • Page 255: Display Settings

    5-2. Setup Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust screen contrast/bright- ness Adjust screen contrast/bright- ness of the rear view monitor camera Changes to day mode.

  • Page 256: Voice Settings

    5-2. Setup Voice settings This screen is used for guidance for voice command systems setting. Adjust the voice guidance vol- ume setting. voice recognition prompts “High”, “Low” or “Off”. Set the train voice recognition. Set the voice prompt interrupt on/off. Set the voice recognition tuto- rial.

  • Page 257: Selecting The Audio Source

    5-3.Using the Multimedia system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again.

  • Page 258: List Screen Operation

    5-3. Using the Multimedia system List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display.

  • Page 259
    5-3. Using the Multimedia system Selecting a track/file/song from the track/file/song list ■ Select “Browse” or cover art. Select the desired track/file/ song. When an MP3/WMA/AAC disc or USB memory device is being used, ® the folder can be selected. When a Bluetooth device or iPod is being used, the album can be selected.
  • Page 260: Optimal Use Of The Multimedia System

    5-3. Using the Multimedia system Optimal use of the multimedia system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality Select “-” or “+” to adjust 1 2 3 the treble, mid or bass to a level between -5 and 5.

  • Page 261: Using The Radio

    5-4.Using the radio Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations…

  • Page 262
    5-4. Using the radio Setting station presets Search for desired stations by turning the “TUNE/SCROLL” knob or pressing the “∧” or “∨” button on “SEEK/TRACK”. Select “(add new)”. To change the preset station to a different one, select and hold the preset station.
  • Page 263: Cd Player Operation

    5-5.Playing an audio CD and MP3/WMA/AAC discs CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.

  • Page 264
    ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •…
  • Page 265
    5-5. Playing an audio CD and MP3/WMA/AAC discs ■ MP3, WMA and AAC files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 for- mat.
  • Page 266
    5-5. Playing an audio CD and MP3/WMA/AAC discs ●Compatible disc formats The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) UDF (2.01 or lower) MP3, WMA and AAC files written in any format other than those listed above may not play correctly, and their file names and folder names may…
  • Page 267
    5-5. Playing an audio CD and MP3/WMA/AAC discs ●Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc.
  • Page 268
    5-5. Playing an audio CD and MP3/WMA/AAC discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function.
  • Page 269: Listening To An Ipod

    5-6.Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.

  • Page 270
    5-6. Using an external device ■ About iPod ●“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an elec- tronic accessory has been designed to connect specifically to iPod or iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
  • Page 271
    5-6. Using an external device ■ Error messages Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- This indicates a problem in the iPod or its con- ual for instructions on how nection. to connect the iPod.” This indicates that there is no music data in “No music files found.”…
  • Page 272
    5-6. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ●Made for • iPod touch (5th generation) •…
  • Page 273: Memory Device

    5-6. Using an external device Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Touch “USB” on the audio source selection screen. Connecting a USB memory device →P. 245 Audio control screen Pressing the “AUDIO”…

  • Page 274
    5-6. Using an external device ■ USB memory functions ●Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be avail- able. If the device is inoperable or a function is unavailable due to a mal- function (as opposed to a system specification), disconnecting the device and reconnecting it may resolve the problem.
  • Page 275
    5-6. Using an external device ●MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) •…
  • Page 276
    5-6. Using an external device ●MP3, WMA and AAC playback • When a device containing MP3, WMA and AAC files is connected, all files in the USB memory device are checked. Once the file check is fin- ished, the first MP3, WMA and AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA and AAC files or create any unnecessary folders.
  • Page 277: Using The Aux Port

    5-6. Using an external device Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” to display the audio control screen. Connecting a portable audio player →P. 245 ■ Operating portable audio players connected to the multimedia system The volume can be adjusted using the vehicle’s audio controls.

  • Page 278: Communication

    ® 5-7.Connecting Bluetooth Preparations to use wireless communica- tion ® The following can be performed using Bluetooth wireless com- munication: A portable audio player can be operated and listened to via ■ multimedia system Hands-free phone calls can be made via a cellular phone ■…

  • Page 279
    ® 5-7. Connecting Bluetooth  ■ Certifications for the Bluetooth FCC ID: BABFT0049B FCC ID: AJDK068 ●CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
  • Page 280
    ® 5-7. Connecting Bluetooth Device registration/connection flow ® 1. Register the Bluetooth device to be used with multimedia system (→P. 280, 281, 282) ® 2. Connect the Bluetooth device to be used (→P. 284) To be used for audio To be used for hands-free phone ®…
  • Page 281
    ® 5-7. Connecting Bluetooth Registering and connecting from the “Bluetooth* Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth ” on the “Setup” screen. Select to connect the device to be used with multimedia sys- tem.
  • Page 282: First Time

    ® 5-7. Connecting Bluetooth ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®…

  • Page 283: First Time

    ® 5-7. Connecting Bluetooth ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands-free system.

  • Page 284: Device

    ® 5-7. Connecting Bluetooth ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ® How to registering a Bluetooth device Display the “Bluetooth* Setup” screen. (→P. 279) Select “Add”.

  • Page 285
    ® 5-7. Connecting Bluetooth Select “OK” when the connection status changes from “Connect- ing…” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth* Setup”…
  • Page 286: Device

    ® 5-7. Connecting Bluetooth ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones [HFP] and audio players [AVP]) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. Press the “SETUP”…

  • Page 287
    ® 5-7. Connecting Bluetooth Manual connection When auto connection has failed or “Bluetooth* Power” is turned off, ® you must connect the Bluetooth device manually. ® Follow the steps in “Connecting a Bluetooth device” from step (→P. 284) : Bluetooth is a registered trademark of Bluetooth SIG, Inc. ®…
  • Page 288: Device Details

    ® 5-7. Connecting Bluetooth ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status Display the “Bluetooth* Setup” screen. (→P. 279) Select the device. Select “Device Info”. The following screen is dis- played: Device Name Change connection method…

  • Page 289: System Settings

    ® 5-7. Connecting Bluetooth ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings Display the “Bluetooth* Setup” screen. (→P. 279) Select “System Settings”. The following screen is dis- played: Bluetooth Power on/off…

  • Page 290: Listening To Bluetooth

    ® 5-8.Bluetooth Audio ® Listening to Bluetooth Audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. ® When a Bluetooth device cannot be connected, check the connec- tion status on the “Bluetooth* Audio”…

  • Page 291: Bluetooth ® Phone

    ® 5-9.Bluetooth phone ® Using a Bluetooth Phone The hands-free system is a function that allows you to use your cellular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.

  • Page 292
    ® 5-9. Bluetooth phone Telephone switch (→P. 301) ■ Microphone ■ The vehicle’s built in micro- phone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. ® To use the hands-free system, you must register your Bluetooth phone in the system.
  • Page 293: Making A Call

    ® 5-9. Bluetooth phone Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing Display the phone screen. (→P. 289) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”…

  • Page 294
    ® 5-9. Bluetooth phone Press the switch on the steering wheel. If the phonebook is empty, a message will be displayed. ® For a PBAP compatible Bluetooth phone and “Automatic Transfer” is off Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always”…
  • Page 295
    ® 5-9. Bluetooth phone Calling using favorites list You can make a call using numbers registered in the contact. Display the phone screen. (→P. 289) Select “Favorites” tab. Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below.
  • Page 296: Receiving A Call

    ® 5-9. Bluetooth phone Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steer- ing wheel or select To refuse a call Press the switch on the steering wheel or select To adjust the incoming call volume Turn the “PWR/VOL”…

  • Page 297: Speaking On The Phone

    ® 5-9. Bluetooth phone Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice Select “Mute”.

  • Page 298
    ® 5-9. Bluetooth phone ■ Release Tones ●A continuous tone signal is a character string that consists of numbers and the characters p or w. (e.g.056133w0123p#1∗) ●When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed.
  • Page 299
    ® 5-9. Bluetooth phone Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party: • Press the switch on the steering wheel. • Select To refuse the call: •…
  • Page 300: Bluetooth ® Phone Message Function

    ® 5-9. Bluetooth phone ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the multimedia system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this func- tion cannot be used.

  • Page 301
    ® 5-9. Bluetooth phone Checking the messages Display the message inbox screen. (→P. 298) Select the desired message from the list. Check that the message is dis- played. E-mails: Select “Mark Unread” or “Mark Read” to mark mail unread or read on the message inbox screen.
  • Page 302
    ® 5-9. Bluetooth phone Replying to a message Display the message inbox screen. (→P. 298) Select the desired message from the list. Select “Quick Message”. Select the desired message. Select “Send”. Editing quick reply message ■ Select “Quick Message”. Select corresponding to the desired message to edit.
  • Page 303: Using The Steering Wheel Switches

    ® 5-9. Bluetooth phone Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Steering wheel switches on the right hand side ■ Off hook switch •…

  • Page 304: Bluetooth ® Phone Settings

    ® 5-9. Bluetooth phone ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (→P.

  • Page 305: Contact/Call History Settings

    ® 5-9. Bluetooth phone Contact/Call History Settings ® The contact can be transferred from a Bluetooth phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed.

  • Page 306
    ® 5-9. Bluetooth phone Update contacts from phone Operation methods differ between PBAP compatible and PBAP ® incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ® For PBAP Compatible Bluetooth Phones ■…
  • Page 307
    ® 5-9. Bluetooth phone Updating the contacts in a different way (From the “Call His- ■ tory” screen) ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (→P. 303) Display the phone screen. (→P. 289) Select the “Call History”…
  • Page 308
    ® 5-9. Bluetooth phone Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (→P. 303) Select “Edit Contact”. Select the desired contact. Select corresponding to the desired name or number. For editing the name Follow the steps in “Registering a new contact to the contacts list”…
  • Page 309
    ® 5-9. Bluetooth phone Favorites list setting Up to 15 contacts (maximum of 4 numbers per contact) can be regis- tered in the favorites list. Registering the contacts in the favorites list ■ Select “Add Favorite”. Select the desired contact to add to the favorites list. Dimmed contacts are already stored as a favorite.
  • Page 310
    ® 5-9. Bluetooth phone Deleting the contacts in the favorites list ■ Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the opera- tion is complete. Deleting contacts in the favorites list in a different way (from the “Contacts”…
  • Page 311
    ® 5-9. Bluetooth phone Message Settings Display the “Phone/Message Settings” screen. (→P. 302) Select “Messaging Settings”. Select the desired item to be set. automatic message transfer on/off. automatic message readout on/off. Set the SMS/MMS notifica- tion popup on/off. Set the e-mail notification popup on/off.
  • Page 312
    ® 5-9. Bluetooth phone Displaying the “Messaging Settings” screen in a different way ■ Display the phone screen. (→P. 289) Select Select “Settings”. Phone Display Settings Display the “Phone/Message Settings” screen. (→P. 302) Select “Phone Display Settings”. Select the desired item to be set.
  • Page 313: What To Do If

    → For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune.html The Bluetooth version of the connected cellular phone may be older than the specified version.

  • Page 314
    ® 5-9. Bluetooth phone When registering/connecting a cellular phone A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone. → Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.
  • Page 315
    → For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune.html Automatic phonebook transfer function on this system is set to off.
  • Page 316
    ® 5-9. Bluetooth phone In other situations Even though all conceivable measures have been taken, the symptom sta- tus does not change. The cellular phone is not close enough to this system. → Bring the cellular phone closer to this system. The cellular phone is the most likely cause of the symptom.
  • Page 317: Bluetooth ® Bluetooth

    ® 5-10.Bluetooth ® Bluetooth ® ■ When using the Bluetooth audio system ●In the following conditions, the system may not function. • If the portable audio player is turned off • If the portable audio player is not connected • If the portable audio player’s battery is low ●There may be a delay if a cellular phone connection is made during ®…

  • Page 318
    ® 5-10. Bluetooth ® ■ Bluetooth antenna The antenna is built into the display. If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate.
  • Page 319
    ® 5-10. Bluetooth ■ Compatible models ® The Bluetooth audio system supports portable audio players with the follow- ing specifications ® ●Bluetooth specifications: Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher) ●Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver.
  • Page 320
    ® 5-10. Bluetooth ■ Certification NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 321
    ® 5-10. Bluetooth WARNING ■ While driving Do not use the portable audio player, cellular phone or connect a device to ® the Bluetooth system. ■ Caution regarding interference with electronic devices ® ● Your audio unit is fitted with Bluetooth antennas.
  • Page 322: Voice Command System

    5-11.Using the voice command system Voice command system The voice command system enables the hands-free system to be operated using voice commands. Operations of the voice command system can be performed by selecting the menu corresponding to each function on the screen.

  • Page 323
    5-11. Using the voice command system ■ Microphone →P. 290 ■ When using the microphone ●It is unnecessary to speak directly into the microphone when giving a com- mand. ●When “Voice Prompt Interrupt” set to on, it is not necessary to wait for the confirmation beep before speaking a command.
  • Page 324: Command List

    5-11. Using the voice command system Command list Some recognizable voice commands and their actions are shown below as examples. Basic Command Action Prompts voice guidance to offer examples of com- “Help” mands or operation methods “Go Back” Returns to the previous screen Phone Command Action…

  • Page 325
    5-11. Using the voice command system Mobile Assistant ® The Mobile Assistant feature will activate Apple’s Siri Eyes Free mode via the steering wheel switches. To operate the Mobile Assis- tant, a compatible cellular phone must be registered and connected to ®…
  • Page 326
    5-11. Using the voice command system ■ Notes about Mobile Assistant ●The available features and functions may vary based on the iOS version installed on the connected device. ●Some Siri features are limited in Eyes Free mode. If you attempt to use an unavailable function, Siri will inform you that the function is not available.
  • Page 327: Interior Features

    Interior features 6-1. Using the air conditioning 6-3. Using the storage system and defogger features Manual air conditioning List of storage features ..342 system……326 • Glove box…… 343 Automatic air conditioning • Console box….343 system……331 • Coin holder ….344 Seat heaters……

  • Page 328: System

    6-1. Using the air conditioning system and defogger ∗ Manual air conditioning system Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the tempera- ture. is not pressed, the system will blow ambient temperature air or heated air.

  • Page 329
    6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■…
  • Page 330: Air Outlets

    6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Direct air flow to the left or right, up or down.

  • Page 331
    6-1. Using the air conditioning system and defogger ■ Outside/recirculated air mode ●When driving on dusty roads such as tunnels or in heavy traffic, set the out- side/recirculated air mode button to the recirculated air mode. This is effec- tive in preventing outside air from entering the vehicle interior. During cooling operation, setting the recirculated air mode will also cool the vehicle interior effectively.
  • Page 332
    6-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
  • Page 333: System

    6-1. Using the air conditioning system and defogger ∗ Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the tempera- ture.

  • Page 334
    6-1. Using the air conditioning system and defogger Change the airflow mode ■ To change the airflow mode, press outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
  • Page 335: Other Functions

    6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■…

  • Page 336
    6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Front Rear Direct air flow to the left or right, up or down.
  • Page 337
    6-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
  • Page 338
    6-1. Using the air conditioning system and defogger ■ Ventilation and air conditioning odors ●To let fresh air in, set the air conditioning system to the outside air mode. ●During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
  • Page 339: Seat Heaters

    6-1. Using the air conditioning system and defogger ∗ Seat heaters WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the seats when the heater is on: • Babies, small children, the elderly, the sick and the physically chal- lenged •…

  • Page 340
    6-1. Using the air conditioning system and defogger ●Vehicles without a smart key system: The seat heaters can be used when the engine switch is in the “ON” posi- tion. Vehicles with a smart key system: The seat heaters can be used when the engine switch is in IGNITION ON mode.
  • Page 341: Using The Interior Lights

    6-2. Using the interior lights Interior lights list Rear interior/personal lights (vehicles with moon roof) (→P. 340) Interior light (vehicles without moon roof) (→P. 340) Front interior/personal lights (vehicles with moon roof) or personal lights (vehicles without moon roof) (→P. 340) Shift lever light (vehicles with moon roof) Engine switch light Door courtesy lights…

  • Page 342: Interior Lights

    6-2. Using the interior lights Interior lights Vehicles without moon roof Vehicles with moon roof Turns the lights on Turns the lights on/off linked to door positions. Turns the lights on/off linked to door positions. Turns the lights on/off Turns the lights off The rear interior lights will turn on/ off together with the front interior lights.

  • Page 343
    6-2. Using the interior lights ●Illuminated entry system: Vehicles without a smart key system: The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed. Vehicles with a smart key system: The lights automatically turn on/off according to the engine switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are open/closed.
  • Page 344: 6-3. Using The Storage Features

    6-3. Using the storage features List of storage features Auxiliary boxes (→P. 346) Cup holders (→P. 345) Glove box (→P. 343) Open tray (→P. 350) Bottle holders/door pockets Console box (→P. 343) (→P. 344) Coin holder (→P. 344) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •…

  • Page 345: Glove Box

    6-3. Using the storage features Glove box Open (press the button) Lock with the master key (vehi- cles without a smart key sys- tem) mechanical (vehicles with a smart key sys- tem) Unlock with the master key (vehicles without a smart key system) or mechanical key (vehicles with a smart key sys- tem)

  • Page 346: Coin Holder

    6-3. Using the storage features ●The console box is provided with a cut out that allows cables to be routed from the power outlet in the console box with the lid closed. Coin holder Pull the lid down while pressing down the button.

  • Page 347: Cup Holders

    6-3. Using the storage features NOTICE Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glass or paper cups containing liquid. The contents may spill and glass cups may break. Cup holders Front Rear…

  • Page 348: Auxiliary Boxes

    6-3. Using the storage features Auxiliary boxes Type A Type B Push the lid. Push the lid. Type C (if equipped) ■ Cable pass through (type B) The auxiliary box is provided with a groove that allows cables to be routed from the power outlet in the auxiliary box with the lid closed.

  • Page 349
    If the LED indicators flash even though the surface of the tray is not hot, the wireless charger may be malfunctioning. Consult your Toyota dealer. ■ When charging of the wireless charger stops temporarily If any of the following operations are performed with the electronic key present, charging may stop temporarily.
  • Page 350
    ■ Certification for the wireless charger For vehicles sold in the U.S.A. This device complies with Part 18 of the FCC Rules. Toyota Motor Sales, U.S.A., Inc. 19001 S. Western Avenue Torrance, CA 90501 For vehicles sold in Canada This ISM device complies with Canadian ICES-001.
  • Page 351
    If in situations other than above the wireless charger does not operate prop- erly or the operation indicator light is blinking, the wireless charger may be malfunctioning. Contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 352: Open Tray

    6-3. Using the storage features NOTICE ■ To prevent failure or damage to data (vehicles with a wireless charger) ● Do not bring magnetic cards, such as a credit card, or magnetic recording media, close to the wireless charger. Otherwise, data may be erased due to the influence of magnetism.

  • Page 353: Trunk Features

    6-3. Using the storage features Trunk features Grocery bag hooks NOTICE To prevent damage to the hooks, do not apply too much load to the hooks. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 354: Other Interior Features Other Interior Features

    6-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward.

  • Page 355: Clock

    6-4. Other interior features Clock The clock on the Entune Audio can be adjusted by the following pro- cedure. For vehicles with a navigation system or Entune Audio Plus, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MAN- UAL”. Press the “SETUP” button and select “General” and then select “Clock”.

  • Page 356: Ashtray

    6-4. Other interior features Ashtray (if equipped) An ashtray can be installed in the cup holder. (→P. 345) WARNING ● When not in use, keep the ashtray closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open ash- tray or ash flying out.

  • Page 357: Power Outlets

    6-4. Other interior features Power outlets Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W. Instrument cluster Console box Open the auxiliary box lid (→P.

  • Page 358: Armrest

    6-4. Other interior features Armrest Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest. Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat.

  • Page 359: Coat Hooks

    6-4. Other interior features Coat hooks Coat hooks are provided on the rear assist grips. WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.

  • Page 360: Garage Door Opener

    6-4. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.  The garage door opener (HomeLink Universal Transceiver) is manu- …

  • Page 361
    6-4. Other interior features Press and hold one of the  HomeLink buttons and the transmitter button. When the  HomeLink indicator light changes from a slow to a rapid flash, you can release both buttons.  If the HomeLink indicator light comes on but does not flash, or flashes rapidly for 2 seconds…
  • Page 362
    6-4. Other interior features Programming a Rolling Code system (for U.S. owners) ■ If your device is Rolling Code equipped, follow the steps under the heading  “Programming HomeLink ” before proceeding with the steps listed below. Locate the learn button on the ceiling mounted garage door opener motor.
  • Page 363
    6-4. Other interior features Programming other devices ■ To program other devices such as home security systems, home door locks or lighting, contact your Toyota dealer for assistance. Reprogramming a button ■  The individual HomeLink buttons cannot be erased but can be reprogrammed.
  • Page 364
    6-4. Other interior features ■ Before programming ●Install a new battery in the remote control transmitter. ●The battery side of the remote control transmitter must be pointed away  from the HomeLink button. ■ To prevent battery discharge Vehicles without a smart key system: …
  • Page 365
    6-4. Other interior features WARNING ■ When programming a garage door or other remote control devices The garage door or other devices may operate, so ensure people and objects are out of danger to prevent potential harm. ■ Conforming to federal safety standards …
  • Page 366: Safety Connect

    Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.

  • Page 367
    ●Phone calls using the vehicle’s Bluetooth technology will not be possible during Safety Connect. ●Safety Connect is available beginning Fall 2009 on select Toyota models. Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection availabil- ity, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
  • Page 368
    ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunction (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services Automatic Collision Notification ■…
  • Page 369
    In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com. Emergency Assistance Button (“SOS”) ■…
  • Page 370
    6-4. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. Exposure to radio frequency signals ■ The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
  • Page 371: Compass

    6-4. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direc- tion in which the vehicle is heading. Operation To turn the compass on or off, press and hold the switch for 3 seconds. Displays and directions Display Direction…

  • Page 372
    6-4. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
  • Page 373
    6-4. Other interior features Circling calibration ■ When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until a direction is dis- played.
  • Page 374
    6-4. Other interior features NOTICE ■ To avoid compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause the compass sensor to malfunction. ■ To ensure normal operation of the compass ●…
  • Page 375: Maintenance And Care

    Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior..374 Cleaning and protecting the vehicle interior… 377 7-2. Maintenance Maintenance requirements ….380 General maintenance..383 Emission inspection and maintenance (I/M) programs……387 7-3. Do-it-yourself maintenance Do-it-yourself service precautions …..

  • Page 376: Maintenance And Care Cleaning And Protecting

    7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.

  • Page 377
    If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, avoid using the system and consult your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 378
    7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •…
  • Page 379: Cleaning And Protecting The Vehicle Interior

    7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.

  • Page 380
    7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
  • Page 381
    7-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •…
  • Page 382: 7-2. Maintenance

    Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.

  • Page 383: Maintenance

    ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.

  • Page 384
    7-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. ■ Handling of the battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
  • Page 385: General Maintenance

    “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment…

  • Page 386: Vehicle Interior

    7-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • When parked on a slope and the Automatic transmission “Park” shift lever is in P, is the vehicle mechanism securely stopped? •…

  • Page 387
    7-2. Maintenance Items Check points • Do seat belts operate smoothly? Seat belts • The seat belts should not be dam- aged. • Do the seat controls operate prop- Seats erly? • Does the steering wheel rotate smoothly? • Does the steering wheel have the Steering wheel correct amount of free play? •…
  • Page 388
    7-2. Maintenance WARNING ■ If the engine is running Turn the engine off and ensure that there is adequate ventilation before per- forming maintenance checks. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 389: Emission Inspection And Maintenance (I/M) Programs

    The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●…

  • Page 390: 7-3. Do-It-Yourself Maintenance

    • Rag or paper towel (→P. 399) • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology U.S.A.:…

  • Page 391
    7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
  • Page 392: Hood

    7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. WARNING ■…

  • Page 393: Positioning A Floor Jack

    7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.

  • Page 394: Engine Compartment

    7-3. Do-it-yourself maintenance Engine compartment 2.5 L 4-cylinder (2AR-FE) engine Fuse boxes (if equipped) Battery (→P. 400) (→P. 424) Radiator (→P. 398) Engine oil filler cap (→P. 395) Electric cooling fans Engine oil level dipstick Condenser (→P. 398) (→P. 394) Engine coolant reservoir Brake fluid reservoir (→P.

  • Page 395
    7-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Fuse boxes (→P. 424) Radiator (→P. 398) Engine oil filler cap (→P. 395) Electric cooling fans Engine oil level dipstick Condenser (→P. 398) (→P. 394) Engine coolant reservoir Brake fluid reservoir (→P. 397) (→P.
  • Page 396
    7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
  • Page 397
    7-3. Do-it-yourself maintenance Wipe the dipstick and reinsert it fully. Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
  • Page 398
    Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●…
  • Page 399: Engine Coolant

    Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 400
    Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■…
  • Page 401: Brake Fluid

    7-3. Do-it-yourself maintenance Brake fluid Checking fluid level ■ The brake fluid level should be between the “MAX” and “MIN” lines on the tank. “MAX” “MIN” Adding fluid ■ Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Item…

  • Page 402
    Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 403
    7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●…
  • Page 404: Washer Fluid

    7-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● The warning message appears on the multi-information display. (→P. 460) WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine etc.

  • Page 405: Tires

    Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the Front same interval as tire inspection. Do not fail to initialize the tire pressure warning system after tire rotation.

  • Page 406
    ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by your Toyota dealer. (→P. 405) ◆ Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol- ■…
  • Page 407
    ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 408
    A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels (vehicles with a tire pressure warning…
  • Page 409
    7-3. Do-it-yourself maintenance ■ Tire types ● Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
  • Page 410
    ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equip- ment) tire. • A tire has been replaced with a tire that is not of the specified size.
  • Page 411
    7-3. Do-it-yourself maintenance ■ The initialization operation (vehicles with a tire pressure warning system) ● Make sure to carry out initialization after adjusting the tire inflation pres- sure. Also, make sure the tires are cold before carrying out initialization or tire inflation pressure adjustment.
  • Page 412
    After performing initialization, the tire pressure warning light blinks for 1 minute then stays on while driving. If the inflation pressure of each tire is still not displayed, have the vehicle inspected by your Toyota dealer. ■ Tire pressure warning system certification…
  • Page 413
    Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
  • Page 414
    When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
  • Page 415: Tire Inflation Pressure

    7-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (→P. 504) I n f o r ma t i o n P r o v i d e d b y :…

  • Page 416
    Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 417
    7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.
  • Page 418: Wheels

    ● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).

  • Page 419
    Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
  • Page 420: Air Conditioning Filter

    7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open glove remove the glove box cover inside the glove box. Remove the filter cover. Remove the air conditioning fil- ter and replace it with a new one.

  • Page 421
    7-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Schedule maintenance guide”…
  • Page 422: Wireless Remote Control/Electronic Key Battery

    7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key system), or CR2032 (vehicles with a smart key system) Replacing the battery Vehicles without a smart key system (type A)

  • Page 423
    7-3. Do-it-yourself maintenance Vehicles without a smart key system (type B) Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag. To prevent the buttons from being disassembled, face the button sur- face downward.
  • Page 424
    7-3. Do-it-yourself maintenance Vehicles with a smart key system Take out the mechanical key. Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag. Remove the depleted battery using a small flathead screw- driver.
  • Page 425
    Use a CR2016 (vehicles without a smart key system) or CR2032 (vehicles with a smart key system) lithium battery ●Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ●Replace the battery only with the same or equivalent type recommended by the manufacturer.
  • Page 426: Checking And Replacing Fuses

    7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment (type A) Engine compartment (type B) (if equipped)

  • Page 427
    Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type C: Contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 428
    After a fuse is replaced ●If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (→P. 427) ●If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■…
  • Page 429: Light Bulbs

    Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.

  • Page 430
    7-3. Do-it-yourself maintenance Replacing light bulbs Headlight high beams (halogen bulb)/daytime running light ■ (halogen bulb) Turn the bulb base counter- clockwise. Pull the bulb out while press- ing the lock release of the connector. When installing, reverse the steps listed. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 431
    7-3. Do-it-yourself maintenance Headlight low beams (halogen bulb) ■ Turn the bulb base counter- clockwise. Pull the bulb out while press- ing the lock release of the connector. When installing, reverse the steps listed. Front side marker lights ■ Turn the bulb base counter- clockwise.
  • Page 432
    7-3. Do-it-yourself maintenance Front turn signal/parking lights (bulb type) ■ To ensure enough space to perform work, turn the steer- ing wheel to rotate the front wheel away from the bulb to be replaced. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac-…
  • Page 433
    7-3. Do-it-yourself maintenance Remove the light bulb. When installing, reverse the steps listed. Stop/tail/rear side marker lights and rear turn signal lights ■ Open trunk remove the luggage trim cover clips. (→P. 435) Pull the hook while depress- ing the button. Partly remove the luggage trim cover.
  • Page 434
    7-3. Do-it-yourself maintenance Turn the bulb base counter- clockwise. Rear turn signal light Stop/tail/rear side marker light Remove the light bulb. Rear turn signal light Stop/tail/rear side marker light When installing, reverse the steps listed. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 435
    7-3. Do-it-yourself maintenance Back-up lights ■ Open trunk remove the clips. (→P. 435) Then partly remove the trunk panel cover. Unplug the connector while depressing the lock release. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 436
    When installing, reverse the steps listed. Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlight low/high beams (LED type) ● Parking lights/daytime running lights (LED type) ● High mounted stoplights…
  • Page 437
    The headlight low/high beams (LED type), parking lights/daytime running lights (LED type) and high mounted stoplights consist of a number of LEDs. If any of the LEDs burns out, take your vehicle to your Toyota dealer to have the light replaced.
  • Page 438
    7-3. Do-it-yourself maintenance I n f o r ma t i o n P r o v i d e d b y :…
  • Page 439: When Trouble Arises

    When trouble arises 8-1. Essential information Emergency flashers ..438 If your vehicle has to be stopped in an emergency …… 439 8-2. Steps to take in an emergency If your vehicle needs to be towed ……441 If you think something is wrong ……

  • Page 440: Emergency Flashers

    8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.

  • Page 441: If Your Vehicle Has To Be Stopped In An Emergency

    8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.

  • Page 442
    8-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
  • Page 443: Steps To Take In An Emergency

    If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.

  • Page 444
    8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear Release the parking brake. Use a towing dolly under the front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration.
  • Page 445
    8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
  • Page 446: If You Think Something Is Wrong

    8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.

  • Page 447: Fuel Pump Shut Off System

    8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.

  • Page 448: If A Warning Light Turns On Or A Warning Buzzer Sounds

    If the light turns off after the parking brake is fully released the system is operating normally. → Immediately stop the vehicle in a safe place and con- (Canada) tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Malfunction indicator lamp Indicates a malfunction in: •…

  • Page 449
    Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS (Electric Power Steer- ing) system → Have the vehicle inspected by your Toyota dealer immediately. Pre-collision system warning light Indicates a malfunction in the PCS (Pre-Collision System)
  • Page 450
    Toyota dealer. When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system → Have the system checked by your Toyota dealer. : Parking brake engaged warning buzzer: →P. 455 : If equipped : Driver’s seat belt buzzer:…
  • Page 451
    ●Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■…
  • Page 452
    1 minute (vehicles with a tire pressure warning system) If the tire pressure warning light frequently comes on after blinking for 1 minute when the engine switch is turned on, have it checked by your Toyota dealer. ■ Warning buzzer In some cases, the buzzer may not be heard because of noisy place or an audio sound.
  • Page 453
    ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
  • Page 454
    8-2. Steps to take in an emergency WARNING ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
  • Page 455
    8-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly (vehicles with a tire pressure warning system) Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 456: If A Warning Message Or Indicator Is Displayed

    Multi-information display If any of the warning message or indicator comes on again after the following actions have been performed, contact your Toyota dealer. Warning message and warning buzzer list Warning message Details/Actions Indicates that: •…

  • Page 457
    Indicates a malfunction in the EPS (Electric Power Steering) system A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. Indicates that the vehicle is being driven at 3 mph (5 km/h) or more with the parking brake still engaged A buzzer also sounds.
  • Page 458
    Indicates a malfunction in: • The ABS; or • The brake assist system (U.S.A.) A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Canada) Indicates a malfunction in the VSC (Vehicle Sta- bility Control) system. → Have the vehicle inspected by your Toyota dealer.
  • Page 459
    Press the “ON-OFF” button once to deactivate the system, and then press the button again to reactivate the system. A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. Indicates a malfunction in the LDA (Lane Depar- ture Alert) system A buzzer also sounds.
  • Page 460
    8-2. Steps to take in an emergency Warning message Details/Actions Indicates a malfunction in the PCS (Pre-Collision system) A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Flashes) (If equipped) Indicates a malfunction in the BSM (Blind Spot Monitor) system A buzzer also sounds.
  • Page 461
    (If equipped) Indicates a malfunction in the Automatic High Beam system A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates that the tire inflation pressure is low → Check the tire inflation pressure, and adjust to the appropriate level.
  • Page 462
    (Vehicles with a tire inflation pres- sure display function) there is a malfunction in the system. Have the vehicle inspected at your Toyota dealer. (If equipped) Indicates that the tire position information can- not be recognized → Drive for a short while and check if the display updates.
  • Page 463
    8-2. Steps to take in an emergency Warning message Details/Actions Indicates that remaining fuel is approximately 2.6 gal. (9.7 L, 2.1 Imp. gal.) or less → Refuel the vehicle. Indicates that the TRAC (Traction Control) sys- tem has been deactivated →…
  • Page 464
    8-2. Steps to take in an emergency Warning message Details/Actions Indicates that, since the VSC (Vehicle Stability Control) system was turned off, the pre-collision brake system operation is stopped → Turn the VSC on. (→P. 216) (If equipped) Indicates that the PCS (Pre-collision system) is not currently functional because the grille cover or the sensor is dirty →…
  • Page 465
    8-2. Steps to take in an emergency ■ Warning message in dynamic radar cruise control mode (if equipped) In the following situations, the warning message may not be displayed even if vehicle-to-vehicle distance decreases: ●When your vehicle and the vehicle ahead are traveling at the same speed or the vehicle ahead is traveling more quickly than your vehicle ●When the vehicle ahead is traveling at a very low speed ●Immediately after cruise control speed is set…
  • Page 466
    8-2. Steps to take in an emergency Have the malfunction repaired immediately. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior Exterior Warning message Details/Actions buzzer buzzer…
  • Page 467
    8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The driver’s door was opened and closed while the electronic key was not in the vehicle, the shift lever was in P and the engine switch was not turned off.
  • Page 468
    8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to drive when the electronic key was not inside the vehicle.  → Confirm times that elec- tronic key is inside the vehicle.
  • Page 469
    (Flashes) right. Indicates a malfunction in the smart key system  Once → Have the vehicle inspected by your Toyota dealer. (Flashes) • When doors were unlocked with the mechanical key and then the engine switch was pressed, the elec-…
  • Page 470
    8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer An attempt was made to start the engine with the shift lever in  Once an incorrect position. → Shift the shift lever to P and start the engine. (Flashes) The engine switch has been turned off with the shift lever in…
  • Page 471
    8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer During a engine starting proce- dure in the event that the elec- tronic key was not functioning properly (→P. 486), the engine  Once switch was touched with the electronic key.
  • Page 472: If You Have A Flat Tire

    8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 403 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.

  • Page 473
    8-2. Steps to take in an emergency Location of the spare tire, jack and tools Luggage floor cover Jack handle Wheel nut wrench Jack Spare tire I n f o r ma t i o n P r o v i d e d b y :…
  • Page 474
    8-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or ●…
  • Page 475
    8-2. Steps to take in an emergency Secure the luggage floor cover using the hook provided. Remove the jack. Taking out the spare tire Lift up the hook of the luggage floor cover on the trunk floor. Secure the luggage floor cover using the hook provided.
  • Page 476
    8-2. Steps to take in an emergency Remove the tool tray. Loosen the center fastener that secures the spare tire. When taking out or stowing the spare tire, make sure to firmly hold opposite ends of the tire. WARNING ■ When storing the spare tire Be careful not to catch fingers or other body parts between the spare tire and the body of the vehicle.
  • Page 477
    8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire…
  • Page 478
    8-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indicate the jack point positions. Raise the vehicle until the tire is slightly raised off the ground.
  • Page 479
    • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
  • Page 480
    8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
  • Page 481
    8-2. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. ■…
  • Page 482
    8-2. Steps to take in an emergency WARNING ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. Do not use more than one compact spare tires simultaneously.
  • Page 483
    When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
  • Page 484: If The Engine Will Not Start

    8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (→P. 153, 155), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.

  • Page 485
    ● There may be a malfunction in the steering lock system (vehicles with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
  • Page 486: If The Shift Lever Cannot Be Shifted From P

    (a sys- tem to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: Set the parking brake.

  • Page 487: If The Electronic Key Does Not Operate Properly

    Opens the windows and moon roof (turn and hold) : This setting must be customized at your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…

  • Page 488
    Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. I n f o r ma t i o n P r o v i d e d b y :…
  • Page 489
    8-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
  • Page 490: If The Vehicle Battery Is Discharged

    The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.

  • Page 491
    8-2. Steps to take in an emergency 3.5 L V6 (2GR-FE) engine 2.5 L 4-cylinder (2AR-FE) engine Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
  • Page 492
    Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
  • Page 493
    8-2. Steps to take in an emergency ●Vehicles with a smart key system: The engine switch mode is memorized by the vehicle. When the battery is reconnected, the system will return to the mode it was in before the battery was discharged. Before disconnecting the battery, turn the engine switch off.
  • Page 494: If Your Vehicle Overheats

    (radia- tor) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir. Reservoir “F” line “L”…

  • Page 495
    (The fans may not operate in freezing temperatures.) If the fans are not operating: Stop the engine immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer.
  • Page 496
    8-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided.
  • Page 497: If The Vehicle Becomes Stuck

    8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow or sand from around the front wheels.

  • Page 498
    8-2. Steps to take in an emergency ■ When it is difficult to free the vehicle Press to turn off TRAC. WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people.
  • Page 499: Vehicle Specifications

    Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)..498 Fuel information ….507 Tire information ….510 9-2. Customization Customizable features ..523 9-3. Items to initialize Items to initialize ….532 I n f o r ma t i o n P r o v i d e d b y :…

  • Page 500: Specifications Maintenance Data

    9-1.Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 190.9 in. (4850 mm) Overall width 71.7 in. (1820 mm) Overall height 57.9 in. (1470 mm) Wheelbase 109.3 in. (2775 mm) 62.4 in. (1585 mm) Front 62.8 in. (1595 mm) Tread 62.0 in.

  • Page 501: Specifications

    The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.

  • Page 502: Lubrication System

    9-1. Specifications Engine Model 2AR-FE 2GR-FE 4-cylinder in line, 6-cylinder V type, Type 4-cycle, gasoline 4-cycle, gasoline 3.54 × 3.86 in. 3.70 × 3.27 in. Bore and stroke (90.0 × 98.0 mm) (94.0 × 83.0 mm) Displacement 152.2 cu. in. (2494 cm 210.9 cu.

  • Page 503
    9-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil…
  • Page 504: Cooling System

    Capacity (Reference) 3.5 L V6 (2GR-FE) engine 9.6 qt. (9.1 L, 8.0 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.

  • Page 505: Automatic Transaxle

    Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. Brakes Pedal clearance 3.8 in.

  • Page 506
    9-1. Specifications Tires and wheels Type A Tire size P205/65R16 94S, T155/70D17 110M Driving under normal conditions Front: 35 psi (240 kPa, 2.4 kgf/cm bar) Rear: 35 psi (240 kPa, 2.4 kgf/cm bar) Spare: Tire inflation pressure 60 psi (420 kPa, 4.2 kgf/cm or bar) (Recommended cold tire Driving at high speeds (above 100 mph [160…
  • Page 507
    9-1. Specifications Type C Tire size P225/45R18 91V, T155/70D17 110M Driving under normal conditions Front: 33 psi (230 kPa, 2.3 kgf/cm bar) Rear: 33 psi (230 kPa, 2.3 kgf/cm bar) Spare: Tire inflation pressure 60 psi (420 kPa, 4.2 kgf/cm or bar) (Recommended cold tire Driving at high speeds (above 100 mph [160…
  • Page 508
    9-1. Specifications Light bulbs Light bulbs Bulb No. Type Headlights  Low beam (halogen bulbs) High beam 9005 (halogen bulbs) Front side marker lights Front turn signal/ Exterior parking lights 7444NA 28/8 (bulb type) Rear turn signal lights WY21W Stop/tail/rear side 7443 21/5 maker lights…
  • Page 509: Fuel Information

    In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■…

  • Page 510
    Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
  • Page 511
    9-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
  • Page 512: Tire Information

    9-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire I n f o r ma t i o n P r o v i d e d b y :…

  • Page 513
    9-1. Specifications Tire size (→P. 513) DOT and Tire Identification Number (TIN)(→P. 512) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators(→P. 403) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
  • Page 514
    9-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
  • Page 515
    9-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits)
  • Page 516
    9-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer I n f o r ma t i o n P r o v i d e d b y :…
  • Page 517
    U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■…
  • Page 518
    9-1. Specifications Temperature A, B, C ■ The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 519
    9-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum…
  • Page 520
    9-1. Specifications Tire related term Meaning The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they Production options replace, not previously considered in curb weight weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube…
  • Page 521
    9-1. Specifications Tire related term Meaning A pneumatic tire in which the ply cords that extend to the beads are laid at alternate Bias ply tire angles substantially less than 90 degrees to the centerline of the tread The tire structure, except tread and sidewall Carcass rubber which, when inflated, bears the load The breaking away of pieces of the tread or…
  • Page 522
    9-1. Specifications Tire related term Meaning A tire designated by its manufacturer as pri- Light truck (LT) tire marily intended for use on lightweight trucks or multipurpose passenger vehicles The maximum load that a tire is rated to carry Load rating for a given inflation pressure The load rating for a tire at the maximum per- Maximum load rating…
  • Page 523
    9-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and Sidewall bead The parting of the rubber compound from the…
  • Page 524
    9-1. Specifications Designated seating Occupant distribution Vehicle normal load, capacity, Number of in a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10 seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat…
  • Page 525: Customization

    Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these fea- tures can be changed by using the meter control switches, the audio system screen or at your Toyota dealer. Customizing vehicle features Changing by using the Entune Audio system ■…

  • Page 526
    9-2. Customization Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Definition of symbols: O = Available, —=Not available Gauges, meters and multi-information display (→P. 77, 81) ■…
  • Page 527
    9-2. Customization Customized set- Function Default setting ting Blue Accent color Light blue Orange O O — Yellow On with the speed limit cau- On with the tion indicator speed limit cau- Speed limit display — O O (yellow) not tion indicator enabled (yellow) enabled…
  • Page 528
    Settings that can be changed using the Entune Audio Plus system or Entune Premium Audio with Navigation system Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, — = Not available Door lock (→P. 99, 107, 485) ■…
  • Page 529
    9-2. Customization Smart key system and wireless remote control (→P. 99, 107) ■ Customized set- Function Default setting ting Operation signal — O O (Emergency flashers) Operation signal — — O (Buzzer) Operation buzzer vol- Level 5 Off to level 7 O O O Time elapsed…
  • Page 530
    9-2. Customization Wireless remote control (→P. 92, 99, 107) ■ Customized set- Function Default setting ting Wireless remote control — — O Driver’s door unlocked in one All doors Unlocking operation step, all doors unlocked in one O O O unlocked in two step steps…
  • Page 531
    9-2. Customization Turn signal lever (→P. 164) ■ Customized set- Function Default setting ting The number of times the turn signal lights flash automatically when the turn signal lever — — O 4 to 7 moved to the first posi- tion during lane…
  • Page 532: Automatic Air Conditioning System

    9-2. Customization Automatic air conditioning system (→P. 331) ■ Customized set- Function Default setting ting A/C auto switch opera- Auto Manual — O O tion : If equipped Illumination (→P. 339) ■ Customized set- Function Default setting ting 7.5 seconds Time elapsed before…

  • Page 533
    9-2. Customization WARNING ■ During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
  • Page 534: 9-3. Items To Initialize

    9-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as maintenance being performed on the vehicle: Item When to initialize Reference Message indicating mainte- After the maintenance is per- nance is required P.

  • Page 535: For Owners

    For owners Reporting safety defects for U.S. owners……534 Seat belt instructions for Canadian owners (in French) ……. 535 SRS airbag instructions for Canadian owners (in French) ……. 537 I n f o r ma t i o n P r o v i d e d b y :…

  • Page 536: Reporting Safety Defects For U.s. Owners

    National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 537: Seat Belt Instructions For Canadian Owners (In French)

    Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité…

  • Page 538
    AVERTISSEMENT ■ Dommage et usure de la ceinture de sécurité Inspectez la ceinture de sécurité périodiquement. Vérifiez si elles ne sont pas entaillées, effilochées et que leurs ancrages ne sont pas desserrés. N’utilisez pas une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée.
  • Page 539: Srs Airbag Instructions For Canadian Owners (In French)

    SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. ◆…

  • Page 540
    ◆ Coussins gonflables latéraux et rideaux SRS Coussins gonflables latéraux avant SRS Participent à la protection du torse des occupants de siège avant Coussins gonflables latéraux arrière SRS Participent à la protection du torse des occupants des sièges latéraux arrière Coussins gonflables rideaux SRS ●…
  • Page 541
    Composants du système de coussins gonflables SRS Capteurs d’impact avant Témoins indicateurs “AIR BAG ON” et “AIR BAG OFF” Système de classification de l’occupant du siège passager Témoin d’avertissement SRS avant (ECU et capteurs) Contact de boucle de ceinture Coussins gonflables de sécurité…
  • Page 542
    Votre véhicule est équipé de COUSSINS GONFLABLES INTELLI- GENTS conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). L’ensemble de capteurs de coussins gonflables (ECU) régule le déploiement des coussins gon- flables sur la base des informations qu’il reçoit des capteurs, etc., indi- qués ci-dessus dans le schéma illustrant les composants du système.
  • Page 543
    AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. Le non-respect de ces précautions peut occasionner des blessures graves, voire mortelles. ● Le conducteur et tous les passagers du véhicule doivent porter correcte- ment leur ceinture de sécurité.
  • Page 544
    Un nourrisson ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement attaché au moyen d’un siège de sécurité enfant. Toyota recommande vivement d’installer tous les nour- rissons et enfants sur les sièges arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
  • Page 545
    AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS ● Ne vous asseyez pas sur le bord du siège et ne vous appuyez pas contre la planche de bord. ● Ne laissez pas un enfant rester debout devant le coussin gonflable passager avant SRS ou s’asseoir sur les genoux du passager avant.
  • Page 546
    AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS ● Ne fixez rien et ne posez rien sur des emplacements tels que la planche de bord, la garniture du volant et la partie inférieure du tableau de bord. Ces éléments peuvent se transformer en projectiles lorsque les coussins gon- flables conducteur, passager avant et genoux SRS se déploient.
  • Page 547
    Si les parties renfermant les coussins gonflables SRS, comme les garnitu- res du volant et des montants avant et arrière, sont endommagées ou cra- quelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne placez rien sur le siège du passager avant, comme un coussin par exemple.
  • Page 548
    SRS Ne mettez pas votre véhicule au rebut et ne procédez à aucune des modifi- cations suivantes sans consulter votre concessionnaire Toyota. Les cous- sins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provoquant la mort ou de graves blessures.
  • Page 549: Index

    Index What to do if… (Troubleshooting)) ….548 Alphabetical index ….. 552 Vehicles with a navigation system or Entune Audio Plus: For details of equipment related to the navigation sys- tem or Entune Audio Plus, such as the audio system, refer to the “NAVIGATION AND MULTIMEDIA SYS- I n f o r ma t i o n P r o v i d e d b y : TEM OWNER’S MANUAL”.

  • Page 550
    You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (→P. 95) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
  • Page 551
    What to do if… (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key system) ● Is the shift lever in P? (→P. 153) ● Is the steering wheel unlocked? (→P. 153) ● Is the battery discharged? (→P.
  • Page 552
    What to do if… (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch.
  • Page 553
    What to do if… (Troubleshooting) An alarm is activated and the horn sounds (vehicles with an alarm) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (→P. 69) ●…
  • Page 554: Alphabetical Index

    Alphabetical index Alphabetical index Antennas (smart key system) ….112 A/C ……..326, 331 Anti-lock Brake System Air conditioning filter ….. 418 (ABS) ……..214 Function…….. 214 (Anti-lock Brake System)..214 Warning light……446 Function …….. 214 Armrest……..356 Warning light……446 Assist grips……

  • Page 555
    Alphabetical index Back-up lights Care ……..374, 377 Replacing light bulb ….433 Aluminum wheels ….375 Wattage …….. 506 Exterior ……… 374 Interior ……..377 Battery ……..400 Battery checking ….400 Seat belts……378 If the vehicle has discharged Cargo capacity……
  • Page 556
    Alphabetical index Child safety …….. 53 Airbag precautions….37 Daytime running light Battery precautions..401, 491 system……..167 Child restraint system ….. 54 Defogger How your child should wear Outside rear view the seat belt……30 mirrors ……327, 333 Installing child restraints ..
  • Page 557
    Alphabetical index Door lock Doors ……..99 Eco Driving Indicator ….79 Key……..100 EDR (Event data recorder)..10 Smart key system ….99 Electric Power Steering Wireless remote control ..99 (EPS) ……..214 Doors ………. 99 Function…….. 214 Automatic door locking Warning light……
  • Page 558
    Alphabetical index Engine switch ….153, 155 Engine……..500 Compartment ……392 Entune Audio system … 240 Engine switch….153, 155 Audio input……245 Hood ……..390 AUX port/USB port ….245 ® How to start the Bluetooth audio ….288 engine……
  • Page 559
    Alphabetical index Fuel ……….. 178 Capacity…….. 500 Flat tire……..470 Fuel gauge……77 Floor mats ……..24 Fuel pump shut off system … 445 Fluid Information……507 Automatic transaxle ….503 Refueling ……178 Brake ……..503 Type……178, 500 Washer ………
  • Page 560
    Alphabetical index Hands-free system I/M test ……..387 (for cellular phone) ..276, 289 Identification ……499 Head restraints ……123 Engine ……..499 Vehicle……..499 Headlights …….. 166 Automatic High Beam Ignition switch system …….. 170 (engine switch)….153, 155 Light switch ……
  • Page 561
    Alphabetical index Keyless entry Lane Departure Alert (LDA) ..199 Smart key system … 99, 107 LATCH anchors ……59 Wireless remote LDA (Lane Departure Alert) ..199 Lever control……99, 108 Keys ……….92 Auxiliary catch lever….390 Battery-saving function ..115 Fuel filler door opener…
  • Page 562
    Alphabetical index Mobile Assistant ….323 Moon roof……… 134 Maintenance Jam protection function ..135 Do-it-yourself maintenance… 388 Operation……134 General maintenance … 383 MP3 disc ……… 261 Maintenance data ….498 Multi-information display..81 Maintenance Audio system-linked ….81 requirements ……
  • Page 563
    Alphabetical index Odometer……..77 Paddle shift switches….162 Parking brake……165 Engine oil ……500 Operation……165 Parking brake engaged Opener Fuel filler door ……. 180 warning buzzer… 446, 455 Hood ……..390 Parking brake engaged Trunk……..107 warning message ….455 Warning light……
  • Page 564
    Alphabetical index Radar cruise control (dynamic Safety Connect ……364 radar cruise control) ….. 186 Seat belt reminder light ..447 Radiator ……..398 Seat belts ……..28 Adjusting the seat belt …. 29 Radio ……..259 Rear personal lights ….340 Automatic Locking Wattage ……..
  • Page 565
    Alphabetical index Spark plug…….. 502 Sensor Automatic headlight Specifications ……498 system …….. 167 Speech command system Automatic High Beam Speedometer……77 system …….. 175 Steering lock Inside rear view mirror ..128 Column lock release ….. 154 LDA (Lane Departure Warning message….
  • Page 566
    Alphabetical index Switches Audio remote control Tachometer …….. 77 switches ……244 Tail lights……..166 Automatic High Beam Light switch……166 switch ……… 170 Replacing light bulbs …. 431 BSM (Blind Spot Monitor) Wattage …….. 506 switch ……… 226 Talk switch ……
  • Page 567
    Alphabetical index Transmission ……160 Tires ………. 403 Chains……..235 Automatic transmission ..160 Checking……. 403 If the shift lever cannot be If you have a flat tire ….. 470 shifted from P ….. 484 Paddle shift switches …. 162 Inflation pressure ….
  • Page 568
    Alphabetical index USB port ……… 245 Warning buzzers Brake system……446 Downshifting ……163 Electric power steering Valet key ……..92 system…….. 447 Vanity lights ……352 Key reminder ….154, 466 Wattage …….. 506 Open door……455 Vanity mirrors ……352 Open hood……
  • Page 569
    Alphabetical index Washing and waxing ….374 Weight……..498 Cargo capacity…… 150 Load limits……150 Vehicle capacity weight ..498 Wheels ……..416 Replacing……416 Size……..504 Window lock switch ….131 Windows……..131 Power windows….. 131 Rear window defogger ….. 327, 333 Windshield wipers ….
  • Page 570: Gas Station Information

    Engine oil capacity (Drain and refill — P. 500 reference) “Toyota Genuine Motor Oil” or equivalent Engine oil type P. 500 I n f o r ma t i o n P r o v i d e d b y :…

  • Page 571
    I n f o r ma t i o n P r o v i d e d b y :…

This manual is also suitable for:

2016 camry

Toyota Camry ★ Perlmutter

OHimich

Была 1 день назад

Олег, 39 лет

Я езжу на Toyota Camry 3.5 V6 (до этого — 5 машин)
Москва, Россия

Фото в бортжурнале Toyota Camry (XV50)

Всем привет!
Сегодня решил закинуть в БЖ электронную версию мануала, так как с машиной еще на стадии знакомства, то периодически полезно туда заглядывать. Мануал взят с официального сайта Toyota. Ничего особенного, просто для удобства. Да и бумажной версии у меня почему то нет.

1. Руководство для владельца Toyota Camry XV55
2. Руководство мультимедиеа Touch 2 WIth GO (2016) Toyota Camry XV55
3. Руководство для владельца по системе навигации Toyota Camry XV55
4. Руководство по эксплуатации навигационной и мультимедийной системы на платформе Android Toyota Camry XV55
5. Руководство по эксплуатации навигационной и мультимедийной системы на платформе Яндекс. Авто Toyota Camry XV55
6. Ссылка на инструкции для других моделей Toyota

Ну вот и всё! Как говориться подписываемся, жмём на репост, ставим лайки… ))
Всех с праздником и хорошего выходного!

Цена вопроса: 0 $
Пробег: 51 200 км

8 мая 2018

Метки: другое

10

Ранее §2. OEM Toyota — брызговики!
Далее §4. Сеточка топливного фильтра Camry V55!

Разместить рекламу

Реклама

Машины в продаже

Шахты

Toyota Camry, 2014

1 650 000 ₽

Шахты

Toyota Camry, 2012

1 250 000 ₽

Шахты

Toyota Camry, 2012

1 250 000 ₽

Волгодонск

Toyota Camry, 2016

2 180 000 ₽

Посмотреть больше машин на Дроме

Комментарии
10

Войдите или зарегистрируйтесь, чтобы писать комментарии, задавать вопросы и участвовать в обсуждении.

Войти
Зарегистрироваться

JohnPrim

Я езжу на Toyota Camry (XV50)

Народ, если есть у кого на V55 в pdf поделитесь плиз!

1 месяц

OHimich

Автор

Я езжу на Toyota Camry (XV70)

Посмотрите по этой ссылке, манул для вашей машины!

1 месяц

OHimich

Автор

Я езжу на Toyota Camry (XV70)


JohnPrim

Народ, если есть у кого на V55 в pdf поделитесь плиз!

carmanuals2.com/toyota/camry-2015-55526

1 месяц

JohnPrim

Я езжу на Toyota Camry (XV50)

Большое спасибо!

1 месяц

JohnPrim

Я езжу на Toyota Camry (XV50)

Первая ссылка не открывается.

1 месяц

OHimich

Автор

Я езжу на Toyota Camry (XV70)

myportalcontent.toyota-eu…oyota/CAMRY_GR_33C26R.pdf

1 месяц

Neegoumaa

Я езжу на Suzuki Jimny (2018)

Спасибо!

1 год

777sham

Я езжу на Toyota Camry (XV50)

👍

2 года

uchka

Я езжу на Skoda Kodiaq

однозначно скачано, спасибо!

5 лет

Potap3838

Я езжу на Toyota Camry (XV50)

В закладки.👍👍👍

5 лет

Corolla

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Camry

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

C-HR

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

RAV4

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Highlander

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Fortuner

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Land Cruiser Prado

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Руководство по вождению в условиях бездорожья

Land Cruiser 300

Руководство для владельца

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Hilux

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Alphard

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Hiace

Руководство для владельца

Руководство по эксплуатации навигационной и мультимедийной системы

Смотрите также:

Понравилась статья? Поделить с друзьями:
  • Arctic cat 650 мануал
  • Циклодинон инструкция по применению цена отзывы форум
  • Инструкция как влюбить в себя парня
  • Руководство по эксплуатации автомобилей volkswagen tiguan
  • Руководство по ремонту меривы