Тойота камри 2021 руководство по эксплуатации

1. Manuals
2. Brands
3. Toyota Manuals
4. Automobile
5. CAMRY 2021
6. Owner’s manual

Quick Links

• Page 3
  Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.

• Page 4: Table Of Contents

  TABLE OF CONTENTS For your information …….8 Instrument cluster Reading this manual…..14 How to search ……15 Pictorial index …….16 Instrument cluster Warning lights and For safety and security indicators……124 Gauges and meters… 130 Multi-information display 1-1. For safe use (4.2-inch display)…..

• Page 5
  Operation of each Driving component 3-1. Key information 4-1. Before driving Keys……..178 Driving the vehicle….. 244 Cargo and luggage…. 252 3-2. Opening, closing and locking the doors Trailer towing….. 253 Doors ………185 4-2. Driving procedures Trunk……..195 Engine (ignition) switch Smart entry & (vehicles without a start system …..200 smart entry &…
• Page 6
  TABLE OF CONTENTS 4-5. Using the driving Interior features support systems Toyota Safety Sense ..301 PCS (Pre-Collision 5-1. Using the air conditioning System) ……307 system and defogger LTA (Lane Tracing Manual air conditioning Assist)……325 system……442 RSA (Road Sign Automatic air conditioning Assist)……340…
• Page 7
  5-4. Other interior features Maintenance and care Other interior features..476 • Sun visors……476 6-1. Maintenance and care • Vanity mirrors ….476 Cleaning and protecting • Power outlet ….477 the vehicle exterior..492 • USB charging ports ..478 Cleaning and protecting •…
• Page 8
  TABLE OF CONTENTS 7-2. Steps to take in When trouble arises an emergency If your vehicle needs to be towed ….. 580 7-1. Essential information If you think something Emergency flashers …576 is wrong……586 If your vehicle has Fuel pump shut off to be stopped in system……
• Page 9
  • Navigation system • Toyota parking assist monitor • Audio/visual system • Panoramic view monitor • Rear view monitor system Toyota Motor Europe NV/SA, Avenue du Bourget 60 — 1140 Brussels, Belgium www.toyota-europe.com CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 10: For Your Information

  Also, remodeling like this will have an effect on advanced safety equipment such as Toyota Safety Sense and there is a danger that it will not work prop- erly or the danger that it may work in situations where it should not be work- ing.

• Page 11
  SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of an RF-transmitter system. Further information regarding frequency bands, power levels, antenna posi- tions and installation provisions for the installation of RF-transmitters, is avail- able on request at your Toyota dealer.
• Page 12
  EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •…
• Page 13
  EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •…
• Page 14
  Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
• Page 15
  CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 16: Reading This Manual

  Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.

• Page 17: How To Search

  How to search Searching by name ■ • Alphabetical index ..P. 689 Searching installation ■ position • Pictorial index….P. 16 Searching by symptom or ■ sound • What to do if… (Troubleshooting) ..P. 684 Searching by title ■…

• Page 18: Pictorial Index

  Pictorial index Pictorial index ■ Exterior Doors ……… . . P. 185 Locking/unlocking .

• Page 19
  Pictorial index Windshield wipers ……. . . P. 290 Precautions for winter season ……P. 434 To prevent freezing .
• Page 20
  Pictorial index ■ Instrument panel (left-hand drive vehicles) Engine switch ……. . P. 254, 256 Starting the engine/changing the positions or modes .
• Page 21
  Pictorial index Turn signal lever ……..P. 272 Headlight switch .
• Page 22
  Pictorial index ■ Switches (left-hand drive vehicles) Automatic High Beam switch ….. . P. 284 VSC OFF switch……..P. 370 1, 2 Camera switch Trunk opener switch .
• Page 23
  Pictorial index Meter control switches ……P. 135, 149 Paddle shift switches ……P. 266 Vehicle-to-vehicle distance switch .
• Page 24
  Pictorial index Wireless charger switch ……P. 480 Seat heater switches ……P. 460 Seat ventilator switches .
• Page 25
  Pictorial index ■ Interior (left-hand drive vehicles) SRS airbags ……..P. 43 Floor mats .
• Page 26
  Pictorial index Interior lights/personal lights ….. . P. 463 Moon roof switches ……P. 232 Panoramic moon roof switches .
• Page 27
  Pictorial index ■ Instrument panel (right-hand drive vehicles) Engine switch ……..P. 256 Starting the engine/changing the modes .
• Page 28
  Pictorial index Turn signal lever ……..P. 272 Headlight switch .
• Page 29
  Pictorial index ■ Switches (right-hand drive vehicles) Fuel filler door opener switch ….. . . P. 299 Trunk opener switch ……. P. 195 VSC OFF switch.
• Page 30
  Pictorial index Meter control switches ……P. 135, 149 Vehicle-to-vehicle distance switch ….P. 353 Cruise control switches Dynamic radar cruise control with full-speed range .
• Page 31
  Pictorial index Parking brake……..P. 273 Applying/releasing .
• Page 32
  Pictorial index ■ Interior (right-hand drive vehicles) SRS airbags ……..P. 43 Floor mats .
• Page 33
  Pictorial index Interior lights/personal lights ….. . P. 463 Panoramic moon roof switches ….P. 236 Vanity mirrors .
• Page 34
  Pictorial index CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 35: For Safety And Security

  For safety and security 1-1. For safe use Before driving…….34 For safe driving ….36 Seat belts……38 SRS airbags……43 Front passenger occupant classification system..57 Exhaust gas precautions ..62 1-2. Child safety Riding with children….63 Child restraint systems ..64 1-3. Emergency assistance ERA-GLONASS/EVAK ..110 1-4.

• Page 36: 1-1. For Safe Use

  1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.

• Page 37
  When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●…

• Page 38: For Safe Driving

  1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust angle seatback so that you are sitting straight up and so that you do not have to lean forward to steer.

• Page 39
  1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (P. 221, 223) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●…

• Page 40: Seat Belts

  1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.

• Page 41
  1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder Release button anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
• Page 42
  ■ Seat belt regulations If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation. ■ Rear seat belt Use the seat belt after passing it through the guide if the seat belt comes free from the guide.
• Page 43
  Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●…
• Page 44
  ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.

• Page 45: Srs Airbags

  1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆…

• Page 46
  1-1. For safe use ◆ SRS side and curtain shield airbags SRS front side airbags (if equipped) Can help protect the torso of the front seat occupants SRS rear side airbags (if equipped) Can help protect the torso of occupants in the rear outer seats SRS curtain shield airbags (if equipped) Can help protect primarily the head of occupants in the outer seats…
• Page 47
  1-1. For safe use SRS airbag system components Front impact sensors SRS warning light Front passenger occupant Front passenger’s seat belt classification system (ECU buckle switch (if equipped) and sensors) (if equipped) Airbag sensor assembly Knee airbags (if equipped) Side impact sensors (rear) Side impact sensors (front (if equipped) doors) (if equipped)
• Page 48
  1-1. For safe use The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occu- pants.
• Page 49
  An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
• Page 50
  1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
• Page 51
  1-1. For safe use WARNING ■ SRS airbag precautions ● Vehicles without SRS knee airbags: Do not attach anything to or lean anything against areas such as the dashboard or steering wheel pad. These items can become projectiles when the SRS driver and front passen- ger airbags deploy.
• Page 52
  ● Vehicles with SRS curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ●…
• Page 53
  Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
• Page 54
  1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●…
• Page 55
  1-1. For safe use ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approximately 20 — 30 km/h [12 — 18 mph] frontal collision with a fixed wall that does not move or deform).
• Page 56
  1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbags (if equipped) may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
• Page 57
  1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags [if equipped]) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
• Page 58
  1-1. For safe use ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●…

• Page 59: Front Passenger Occupant Classification System

  1-1. For safe use Front passenger occupant classification  system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and front passenger knee airbag. Driver’s and front passenger’s seat belt reminder light SRS warning light “AIRBAG OFF”…

• Page 60
  1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIRBAG ON” and “AIRBAG OFF” “AIRBAG ON” indicator lights Indicator/ SRS warning light warning light Driver’s and front passenger’s seat belt reminder light flashing Front passenger airbag Devices…
• Page 61
  1-1. For safe use Unoccupied ■ “AIRBAG ON” and “AIRBAG OFF” “AIRBAG OFF” indicator lights Indicator/ SRS warning light warning light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Front passenger knee airbag There is a malfunction in the system ■…
• Page 62
  1-1. For safe use WARNING ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
• Page 63
  SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.

• Page 64: Exhaust Gas Precautions

  Keep the trunk lid closed. ● If you smell exhaust gases in the vehicle even when the trunk lid is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking ●…

• Page 65: Child Safety

  1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch etc.

• Page 66: Child Restraint Systems

  1-2. Child safety Child restraint systems Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. Use a child restraint system when riding with a small child that can- not properly use a seat belt.

• Page 67
  Points to remember ● If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint sys- tem installation. ● Use a child restraint system until the child becomes large enough to properly wear the vehicle’s seat belt.
• Page 68
  ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
• Page 69
  1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat (except for Taiwan) For the safety of a child, install a child restraint system to a rear seat. When installing a child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
• Page 70
  1-2. Child safety WARNING ■ When using a child restraint system (except for Taiwan) ● There is a label(s) on the passenger side sun visor, indicating it is forbidden to attach a rear-facing child restraint system to the front passenger seat. Details of the label(s) are shown in the illustration below.
• Page 71
  1-2. Child safety WARNING ■ When using a child restraint system (except for Taiwan) ● Vehicles with front passenger occupant classification system: Never install a rear-facing child restraint system on the front passenger seat even if the “AIRBAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
• Page 72
  1-2. Child safety WARNING ■ When using a child restraint system (except for Taiwan) ● Vehicles with SRS side airbags: Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat from which the SRS side airbags deploy even if the child is seated in the child restraint sys- tem.
• Page 73
  1-2. Child safety WARNING ■ When installing a child restraint system (for Taiwan) Observe the following precautions. Failure to do so may result in death or serious injury. ● Never use a child restraint system on the front passenger seat. The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event…
• Page 74
  1-2. Child safety WARNING ■ When using a child restraint system (for Taiwan) Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillars, or roof side rails from which the SRS curtain shield airbags deploy…
• Page 75
  1-2. Child safety Child restraint system compatibility for each seating position (for Egypt) Child restraint system compatibility for each seating position ■ Compatibility of each seating position with child restraint systems (P. 75) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols.
• Page 76
  1-2. Child safety : UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child restraint systems. : The child restraint systems mentioned in the table may not be avail- able outside of the EU area. : The displayed mark may differ depending on the product. Checking the category of the child restraint system.
• Page 77
  1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems 1, 2, 3 2, 3 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for i-Size and ISOFIX child restraint system. Includes a top tether anchorage point.
• Page 78
  1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle…
• Page 79
  1-2. Child safety Detail information for child restraint systems installation ■ Seating position Seat position number Seating position suitable Forward for universal belted facing (Yes/No) only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing R2X,R2, R2X,R2, fixture (R1/R2X/R2/R3/No)
• Page 80
  1-2. Child safety Fixture Description Full-height, forward-facing child restraint systems Reduced-height forward-facing child restraint systems Reduced-height forward-facing child restraint systems Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat…
• Page 81
  1-2. Child safety ● If the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat cushion forward. ● When installing a junior seat, if the child in your child restraint system is in a very upright position, adjust the seatback angle to the most comfortable position.
• Page 82
  1-2. Child safety Before confirming the compatibility of each seating position ■ with child restraint systems Checking the child restraint system standards. Use a child restraint system that conforms to UN(ECE) R44 1, 2 UN(ECE) R129 The following approval mark is displayed on child restraint sys- tems which are conformed.
• Page 83
  1-2. Child safety Checking the category of the child restraint system. Check the approval mark of the child restraint system for which of the following categories the child restraint system is suitable. Also, if there are any uncertainties, check the user’s guide included with the child restraint system or contact the retailer of the child restraint system.
• Page 84
  1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems 1, 2, 3 2, 3 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for child restraint systems given on recom- mended child restraint systems and compatibility table (P.
• Page 85
  1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle…
• Page 86
  1-2. Child safety Detail information for child restraint systems installation ■ Seating position Seat position number Seating position suitable Forward for universal belted facing (Yes/No) only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing R2X,R2, R2X,R2, fixture (R1/R2X/R2/R3/No)
• Page 87
  1-2. Child safety Fixture Description Full-height, forward-facing child restraint systems Reduced-height forward-facing child restraint systems Reduced-height forward-facing child restraint systems Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat…
• Page 88
  1-2. Child safety The child restraint systems mentioned in the table may not be avail- able outside the EU area. When securing some types of child restraint systems in rear seat, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness.
• Page 89
  1-2. Child safety Child restraint system compatibility for each seating position (for Taiwan) Child restraint system compatibility for each seating position ■ Compatibility of each seating position with child restraint systems (P. 89) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols.
• Page 90
  1-2. Child safety : UN(ECE) R44 and UN(ECE) R129 are U.N. regulations for child restraint systems. : The child restraint systems mentioned in the table may not be avail- able outside of the EU area. : The displayed mark may differ depending on the product. Checking the category of the child restraint system.
• Page 91
  1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for i-Size and ISOFIX child restraint system. Includes a top tether anchorage point. Not suitable for child restraint system.
• Page 92
  1-2. Child safety Detail information for child restraint systems installation ■ Seating position Seat position number Seating position suitable for universal belted (Yes/No) i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing fixture R2X,R2, R2X,R2, (R1/R2X/R2/R3/No) Suitable forward facing fixture F2X, F2,…
• Page 93
  1-2. Child safety Fixture Description Full-height, forward-facing child restraint systems Reduced-height forward-facing child restraint systems Reduced-height forward-facing child restraint systems Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat…
• Page 94
  1-2. Child safety Child restraint system compatibility for each seating position (for Argentina) Child restraint system compatibility for each seating position ■ Compatibility of each seating position with child restraint systems (P. 95) displays the type of child restraint systems that can be used and possible seating positions for installation using symbols.
• Page 95
  1-2. Child safety Before confirming the compatibility of each seating position ■ with child restraint systems Checking the child restraint system standards. Use a child restraint system that conforms to UN(ECE) R44 1, 2 UN(ECE) R129 The following approval mark is displayed on child restraint sys- tems which are conformed.
• Page 96
  1-2. Child safety Checking the category of the child restraint system. Check the approval mark of the child restraint system for which of the following categories the child restraint system is suitable. Also, if there are any uncertainties, check the user’s guide included with the child restraint system or contact the retailer of the child restraint system.
• Page 97
  1-2. Child safety Compatibility of each seating position with child restraint sys- ■ tems 1, 2, 3 2, 3 2, 3 Suitable for “universal” category child restraint system fixed with the seat belt. Suitable for child restraint systems given on recom- mended child restraint systems and compatibility table (P.
• Page 98
  1-2. Child safety : Move the front seat fully rearward. If the passenger seat height can be adjusted, move it to the upper most position. : Adjust the seatback angle to the most upright position. When installing a forward-facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle…
• Page 99
  1-2. Child safety Detail information for child restraint systems installation ■ Seating position Seat position number Seating position suitable Forward for universal belted facing (Yes/No) only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No) Suitable rearward facing R2X,R2, R2X,R2, fixture (R1/R2X/R2/R3/No)
• Page 100
  1-2. Child safety Fixture Description Full-height, forward-facing child restraint systems Reduced-height forward-facing child restraint systems Reduced-height forward-facing child restraint systems Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat…
• Page 101
  1-2. Child safety The child restraint systems mentioned in the table may not be avail- able outside the LATIN area. When securing some types of child restraint systems in rear seat, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness.
• Page 102
  1-2. Child safety Child restraint system installation method Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P. 102 Except for Korea  ISOFIX lower anchor- P.
• Page 103
  1-2. Child safety Installation method Page Seats with an adjustable type head  restraint Top tether anchorage P. 108 attachment Seats with an integrated type head  restraint CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 104
  1-2. Child safety Child restraint system fixed with a seat belt Installing child restraint system using a seat belt ■ Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the child restraint system on hand is not within the “universal” cat- egory (or the necessary information is not in the table), refer to the “Vehicle List”…
• Page 105
  You may need a locking clip to install the child restraint system. Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer: Locking clip for child restraint system (Part No. 73119-22010) CAMRY_GE…
• Page 106
  1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
• Page 107
  1-2. Child safety Child restraint system fixed with an ISOFIX lower anchorage ISOFIX lower anchorages (ISOFIX child restraint system) ■ Lower anchorages are provided for the rear outboard seats. (Marks displaying the location of the anchorages are attached to the seats.) Except for Korea For Korea…
• Page 108
  1-2. Child safety Remove the anchorage cov- ers. Check the positions of the exclusive fixing bars, and install the child restraint sys- tem to the seat. The bars are installed behind the anchorage covers. After installing the child restraint system, rock it back and forth to ensure that it is installed securely.
• Page 109
  1-2. Child safety ■ When using a “MIDI 2” (for Latin American countries Adjust the support leg and ISOFIX con- nectors as follows: Lock the ISOFIX connectors where number 2 can be seen. Lock the support leg where 4 holes can be seen.
• Page 110
  1-2. Child safety Using a top tether anchorage Top tether anchorages ■ Top tether anchorages are provided for the rear outboard seats. Use top tether anchorages when fixing the top strap. Seats with an adjustable Seats with an integrated type …
• Page 111
  1-2. Child safety Open the top tether anchorage cover, latch the hook onto the top tether anchorage and tighten the top strap. Make sure the top strap is securely latched. (P. 104) When installing the child restraint system with the head restraint being raised, be sure to have the top strap pass underneath the head restraint.

• Page 112: 1-3. Emergency Assistance

  ERA-GLONASS/EVAK system operator.  : If equipped  : Operates within regions offering emergency notification services. Ask your Toyota dealer for details.  : The system name differs depending on the country. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 113
  1-3. Emergency assistance Emergency Notification Services Automatic Emergency Calls ■ If any airbag deploys, the system is designed to automatically call the ERA-GLONASS/EVAK control center. The answering operator receives the vehicle’s location, the time of the incident and the vehi- cle VIN, and attempts to speak with the vehicle occupants to assess the situation.
• Page 114
  The service life of the backup battery does not exceed 3 years. Device test mode A test mode is provided for to check the performance of the Emer- gency Call system. To test the device, contact your Toyota dealer. ■ Free/Open Source Software Information This product contains Free/Open Source Software (FOSS).
• Page 115
  If the battery’s voltage decreases or there is a disconnection, the system may not be able to connect to the ERA-GLONASS/EVAK control center. ■ When the Emergency Call system is replaced with a new one The Emergency Call system should be registered. Contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 116
  Emergency Call or manual maintenance check It may not be possible to make Emergency Calls, confirm the system status, or communicate with the ERA-GLONASS/EVAK control center operator. If any of the above equipment is damaged, please consult your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 117: Theft Deterrent System

  1-4. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.

• Page 118
  1-4. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●…

• Page 119: Alarm

  1-4. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: Vehicles without a smart entry & start system …

• Page 120
  1-4. Theft deterrent system Setting the alarm system Vehicles without a smart entry & start system: Close the doors, trunk and hood, and lock all the doors using the wireless remote control. The system will be set automatically after 30 seconds. Vehicles with a smart entry &…
• Page 121
  1-4. Theft deterrent system Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm: Vehicles without a smart entry & start system  ● Unlock the doors or open the trunk using the wireless remote con- trol.
• Page 122
  1-4. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ● The doors are unlocked using the key or mechanical key. ● The trunk is opened using the key or mechanical key.
• Page 123
  1-4. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 124
  1-4. Theft deterrent system CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 125: Instrument Cluster

  Instrument cluster Instrument cluster Warning lights and indicators ……124 Gauges and meters …130 Multi-information display (4.2-inch display) …..134 Multi-information display (7-inch display) ….147 Head-up display….166 Fuel consumption information…….173 CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 126: Warning Lights And Indicators

  2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster, cen- ter panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustrations dis- play all warning lights and indicators illuminated.

• Page 127
  PKSB OFF indicator lamp (P. 588) (P. 590) (if equipped) SRS warning light LTA indicator (P. 590) (P. 588) (if equipped) (Yellow) Toyota parking assist- ABS warning light sensor indicator (P. 589) (P. 590) (if equipped) Inappropriate pedal RCD OFF indicator operation warning light (P.
• Page 128
  They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer. : This light illuminates on the multi-information display with a message.

• Page 129: Indicators

  2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Brake hold standby (P. 272) indicator (P. 277) Tail light indicator Cruise control indicator (P. 279) (P. 346, 363) (if equipped) Dynamic radar cruise Headlight high beam…

• Page 130
  2. Instrument cluster 1, 4 Security indicator Slip indicator (P. 369) (P. 115, 117) Toyota parking assist- 1, 3 VSC OFF indicator sensor indicator (P. 371) (P. 388) (if equipped) “BSM” indicator RCD OFF indicator (P. 376) (P. 405) (if equipped) (if equipped) “RCTA”…
• Page 131
  There may be a malfunction in a system if a light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer. : This light does not turn on when the system is disabled.

• Page 132: Gauges And Meters

  2. Instrument cluster Gauges and meters 4.2-inch display  7-inch display  The units used on the meters may differ depending on the target region. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 133
  2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute Shift position (P. 261, 266) Outside temperature Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F). Low outside temperature indicator comes on when the ambient temperature is 3°C (37°F) or lower.
• Page 134
  ● When “” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Fuel gauge and driving range display The fuel gauge and driving range display are linked. If the fuel gauge and…
• Page 135
  2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. ● The engine may be overheating if the engine coolant temperature gauge is in the red zone (H).

• Page 136: Multi-Information Display (4.2-Inch Display)

  2. Instrument cluster Multi-information display (4.2-inch display) Summary of functions The multi-information display presents the driver with a variety of driv- ing-related data, such as the current outside temperature. The multi- information display can also be used to change the display settings and other settings.

• Page 137
  2. Instrument cluster “ODO/TRIP” switch (P. 135) Meter control switches (P. 135) Using the multi-information display ◆ Using the content display area The content display area is operated using the meter control switches. Scroll screens , change the displayed content and move the cursor Press: Enter/Set…
• Page 138
  2. Instrument cluster Menu icons Select a menu icon to display its content. Drive information (P. 137) Select to display various drive data. Navigation system-linked display (if equipped) Select to display the following navigation system-linked information. • Route guidance • Compass display (heading-up display) Audio system-linked display Select to enable selection of an audio source or track on the meter using the meter control switches.
• Page 139
  2. Instrument cluster Drive information ( Trip (after start) ■ Average fuel economy Displays the average fuel con- sumption since engine start. Average vehicle speed Displays the average vehicle speed since engine start. Elapsed time Displays the time elapsed since engine start.
• Page 140
  2. Instrument cluster Tank (after refuel) ■ 1, 2 Driving range Displays the driving range with remaining fuel. 1, 3 Average fuel economy Displays the average fuel con- sumption since the vehicle was refueled. : When only a small amount of fuel is added to the tank, the display may not be updated.
• Page 141
  2. Instrument cluster Settings display ( ◆ Changing settings Use the meter control switches on the steering wheel to change settings. Press to select Operate the switches to select a desired item. Change the setting by referring to the message displayed on the screen.
• Page 142
  2. Instrument cluster Parking assist (Toyota parking assist-sensor) (if equipped) ■ (P. 388) Item Settings Details Toyota parking Select enable/disable assist-sensor Toyota parking assist-sensor. PCS (Pre-Collision System) (if equipped) (P. 307) ■ The following pre-collision system settings can be changed:…
• Page 143
  1 (Low) Toyota parking Select to change the volume of assist-sensor 2 (Medium) the Toyota parking assist-sensor buzzer volume buzzer. 3 (Loud) TPWS (Tire pressure warning system) (if equipped) (P. 533) Select to initialize the tire pres- sure warning system. To per-…
• Page 144
  ID codes must be (vehicles without a tire inflation pres- registered by a Toyota dealer. sure display function) For information regarding chang- ing the registered ID code set, contact your Toyota dealer.
• Page 145
  2. Instrument cluster Item Settings Details Incoming calls (if equipped) Select to enable/disable the pop- Pop-up display up display. Brightness adjust- ment Select to adjust the time. 12H/24H Clock Press the switch to (vehicles without a Hour change the display between 12H navigation or multi- and 24H or to adjust the hour or media system)
• Page 146
  2. Instrument cluster Suggestion function Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. The suggestion function can be turned on/off. (Customizable features:P. 672) ■ Suggestion to turn off the headlights If the headlights are left on for a certain amount of time after the engine switch has been turned off, if the headlight switch is in the “AUTO”…
• Page 147
  2. Instrument cluster ■ Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
• Page 148
  2. Instrument cluster ■ Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. ■ Customization Some functions can be customized. (P. 139, 672) WARNING ■…

• Page 149: Multi-Information Display (7-Inch Display)

  2. Instrument cluster Multi-information display (7-inch display) Summary of functions The multi-information display presents the driver with a variety of driv- ing-related data, such as the current outside temperature. The multi- information display can also be used to change the display settings and other settings.

• Page 150
  2. Instrument cluster Content display area A variety of information can be displayed by selecting a menu icon. Addi- tionally, warning or suggestion/advice pop-up displays will be displayed in some situations. • Menu icon content (P. 150) • Suggestion function (P. 162) •…
• Page 151
  2. Instrument cluster Using the multi-information display ◆ Using the content display area The content display area is operated using the meter control switches. Scroll screens , change the displayed content and move the cursor Press: Enter/Set Press and hold: Reset/Dis- play the next screen Return previous…
• Page 152
  • Tire inflation pressure (vehicles with a tire inflation pressure display function) (P. 533) Enable/Disable the following systems: • Parking assist (Toyota parking assist-sensor) (if equipped) (P. 388) • BSM (Blind Spot Monitor) function (if equipped) (P. 376) • RCTA (Rear Cross Traffic Alert) function (if equipped) (P. 398)
• Page 153
  2. Instrument cluster Settings display (P. 154) Select to change the meter display settings and other settings. Eco-friendly driving information ( Fuel consumption ■ Current fuel consumption Displays the instantaneous cur- rent fuel consumption. Average fuel economy (after start) Displays the average fuel con- sumption since engine start.
• Page 154
  2. Instrument cluster Average fuel economy Displayed item (listed below) can be changed on the fuel economy type screen of . (P. 154) ● Total (after reset) 1, 5 Displays the average fuel consumption since the display was reset. ● Tank (after refuel) Displays the average fuel consumption since the vehicle was 1, 2 refueled.
• Page 155
  2. Instrument cluster Speedometer display/Driving range ■ Speedometer display Displays the vehicle speed. Driving range Displays the driving range with remaining fuel. When only a small amount of fuel is added to the tank, the dis- play may not be updated. When refueling, turn the engine switch off.
• Page 156
  2. Instrument cluster Settings display ( ◆ Changing settings Use the meter control switches on the steering wheel to change settings. Press to select Operate the switches to select a desired item. Press or press and hold The available settings will differ depending on if is pressed or pressed and held.
• Page 157
  2. Instrument cluster PCS (Pre-Collision System) (if equipped) (P. 307) ■ Press and hold to change the settings of the following items: Item Settings Details Select to enable/disable the pre- collision system. Early Select to change the warning Warning sensitivity Middle timing.
• Page 158
  2. Instrument cluster BSM (Blind Spot Monitor) (if equipped) (P. 376) ■ Press to enable/disable the Blind Spot Monitor function. Item Settings Details Select enable/disable Blind Spot Monitor function. Press and hold to change the settings of the following item: Item Settings Details…
• Page 159
  ■ Press to enable/disable the Parking Support Brake. Item Settings Details Select enable/disable PKSB Parking Support Brake system. Parking assist (Toyota parking assist-sensor) (if equipped) ■ (P. 388) Press to enable/disable the Toyota parking assist-sensor. Item Settings Details Toyota parking…
• Page 160
  2. Instrument cluster HUD (Head-up display) (if equipped) (P. 166) ■ Press to enable/disable the head-up display. Item Settings Details Select enable/disable head-up display. Press and hold to change the settings of the following items: Item Settings Details Select to adjust the brightness/ position of the head-up display.
• Page 161
  2. Instrument cluster RSA (Road Sign Assist) (if equipped) (P. 340) ■ Press and hold to change the settings of the following items: Item Settings Details Select enable/disable RSA. Select a notification method used to warn the driver if the vehicle speed exceeds the speed dis- played on the speed limit sign on Excess…
• Page 162
  ID codes must be (vehicles without a tire inflation pres- registered by a Toyota dealer. sure display function) For information regarding chang- ing the registered ID code set, contact your Toyota dealer.
• Page 163
  2. Instrument cluster Meter settings ■ Press and hold to change the settings of the following items: Item Settings Details Select to change the language Language displayed. Select to change the units of Units measure displayed. Select to enable/disable the Eco (Eco Driving Driving Indicator Light.
• Page 164
  2. Instrument cluster Item Settings Details Select to reset the meter display Default setting settings to the default setting. : Selecting this item will only change the gadget. : Selecting this item will turn the display of the gadget off. Odometer/trip meter Odometer ■…
• Page 165
  2. Instrument cluster Suggestion to close the power windows (linked to vehicle ■ speed) If the vehicle is driven at high speeds for a certain amount of time with a power window open, a suggestion message will be displayed asking if you wish to close the power windows. To close all of the power windows, select “Yes”.
• Page 166
  2. Instrument cluster ■ Tire pressure (vehicles with a tire inflation pressure display function) ● It may take a few minutes to display the tire inflation pressure after the engine switch is turned to IGNITION ON mode. It may also take a few min- utes to display the tire inflation pressure after inflation pressure has been adjusted.
• Page 167
  2. Instrument cluster NOTICE ■ While setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 168: Head-Up Display

  2. Instrument cluster  Head-up display Summary of functions The head-up display is linked to the meters and navigation system and projects a variety of information in front of the driver, such as the current vehicle speed. Driving assist system status/navigation system-linked display area (if equipped) (P.

• Page 169
  2. Instrument cluster Using the head-up display Select on the multi-information display (P. 154) and then ◆ Enabling/disabling the head-up display Press to enable/disable the head-up display. ◆ Changing the head-up display settings Press and hold to change the following settings: Eco Driving Indicator/Tachometer ■…
• Page 170
  • Dynamic radar cruise control with full-speed range (if equipped) (P. 346) • LTA (Lane Tracing Assist) (if equipped) (P. 325) • Toyota parking assist-sensor (P. 388) ◆ Navigation system-linked display area (if equipped) Displays the following items, which are linked to the navigation sys-…
• Page 171
  2. Instrument cluster Eco Driving Indicator/Tachometer Eco Driving Indicator ■ Eco Driving Indicator Zone Display Eco driving ratio based on acceleration Zone of Eco driving Displayed content is the same as that displayed on the multi- information display (Eco Driving Indicator).
• Page 172
  2. Instrument cluster Information display area Displays the following items in the appropriate situation: Warning/Message ■ ● Alert from the LTA (Lane Tracing Assist) (if equipped) ● Dynamic radar cruise control with full-speed range (if equipped) ● Brake Override System/Drive-Start Control ●…
• Page 173
  2. Instrument cluster ■ Head-up display The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses. Adjust the brightness of the head-up display or remove your sunglasses. ■ Display brightness The brightness of the head-up display can be adjusted on of the multi- information display.
• Page 174
  2. Instrument cluster NOTICE ■ To prevent damage to components ● Do not place any drinks near the head- up display projector. If the projector gets wet, electrical malfunctions may result. ● Do not place anything on or put stickers onto the head-up display projector.

• Page 175: Fuel Consumption Information

  2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the audio system screen. The illustrations below are for left-hand drive vehicles. Trip information Without navigation function  Press the “INFO” button. If the “History” screen is displayed, select “Trip information”.

• Page 176
  2. Instrument cluster With navigation function  Press the “MENU” button. Select “Information” on the “Menu” screen. If the “History” screen is displayed, select “Trip information”. Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since engine was started Fuel consumption in the past…
• Page 177
  2. Instrument cluster History Without navigation function  Press the “INFO” button. If the “Trip information” screen is displayed, select “History”. With navigation function  Press the “MENU” button. Select “Information” on the “Menu” screen. If the “Trip information” screen is displayed, select “History”. Resetting the past record data Best recorded fuel consump-…
• Page 178
  2. Instrument cluster ■ Updating the past record data Update the average fuel consumption by selecting “Clip” to measure the cur- rent fuel consumption again. ■ Resetting the data The fuel consumption data can be deleted by selecting “Clear”. ■ Cruising range Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining.

• Page 179: Operation Of Each Component

  Operation of each component 3-1. Key information Keys……..178 3-2. Opening, closing and locking the doors Doors ………185 Trunk……..195 Smart entry & start system …..200 3-3. Adjusting the seats Front seats……207 Rear seats ……209 Driving position memory……212 Head restraints ….216 3-4. Adjusting the steering wheel and mirrors Steering wheel ….219 Inside rear view mirror ..221…

• Page 180: 3-1. Key Information

  3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart entry & start system  Keys Operating the wireless remote con- trol function (P. 179) Key number plate Vehicles with a smart entry & start system …

• Page 181
  Opens the trunk (P. 196) Sounds the alarm (P. 181) : If equipped : This setting must be customized at your Toyota dealer. Vehicles with a smart entry & start system  Locks all the doors (P. 186) Except for Korea: Closes the…
• Page 182
  3-1. Key information Using the key (vehicles without a smart entry & start system) Releasing To release the key, press the but- ton. Folding To stow the key, press the button then fold the key Using the mechanical key (vehicles with a smart entry & start system) To take out the mechanical key, slide the release lever and take…
• Page 183
  ■ If you lose your keys New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart entry & start system) or the other mechanical key (vehicles with a smart entry & start system) and the key number stamped on your key number plate.
• Page 184
  3-1. Key information ■ Conditions affecting operation Vehicles without a smart entry & start system  The wireless remote control function may not operate normally in the follow- ing situations: ● When the wireless key battery is depleted ● Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electrical noise ●…
• Page 185
  Confirmation of the registered key number (vehicles with a smart entry & start system) The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. ■ If a wrong key is used (vehicles with a smart entry & start system) The key cylinder rotates freely to isolate inside mechanism.
• Page 186
  When an electronic key is lost (vehicles with a smart entry & start sys- tem) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle. CAMRY_GE…

• Page 187: Doors

  3-2. Opening, closing and locking the doors Doors Unlocking and locking the doors from the outside ◆ Entry function (if equipped) Carry the electronic key to enable this function. Except for Korea  Grip the front door handle to unlock all the doors. Make sure to touch the sensor on the back of the handle.

• Page 188
  Press and hold to open the win- dows panoramic 1, 2 moon roof : If equipped : This setting must be customized at your Toyota dealer. Vehicles with a smart entry & start system  Locks all the doors Check that the door is securely locked.
• Page 189
  1, 2 moon roof : If equipped : This setting must be customized at your Toyota dealer. Vehicles with a smart entry & start system  The doors can also be locked and unlocked with the mechanical key. (P. 637)
• Page 190
  3-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Windows and moon roof or panoramic moon roof: Except for Korea: A buzzer sounds to indicate that the windows and moon roof or panoramic moon roof are operating.
• Page 191
  3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door Except for Korea: The driver’s door can be opened by pulling the inside handle even if the lock button is in the lock posi-…
• Page 192
  3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
• Page 193
  3-2. Opening, closing and locking the doors Setting and canceling the functions (vehicles without a naviga- ■ tion or multimedia system) To switch between setting and canceling, follow the procedure below. Vehicles without a smart entry & start system: Close all the doors and turn the engine switch to the “ON”…
• Page 194
  3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart entry & start system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator light on the key surface is not on, press and hold (if equipped) for approximately 5 seconds while pressing and holding…
• Page 195
  3-2. Opening, closing and locking the doors ■ Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, how- ever, the system may not operate.
• Page 196
  3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●…

• Page 197: Trunk

  3-2. Opening, closing and locking the doors Trunk The trunk can be opened using the trunk opener switch, Trunk button (if equipped), wireless remote control or key. Opening the trunk from inside the vehicle Press and hold the trunk opener switch. Left-hand drive vehicles Right-hand drive vehicles …

• Page 198
  3-2. Opening, closing and locking the doors Vehicles without entry function  Unlock all the doors using one of the following methods and then press the button on the trunk lid: • Wireless remote control • Door lock switches • Mechanical key ◆…
• Page 199
  3-2. Opening, closing and locking the doors When closing the trunk Using the trunk grip, lower the trunk without applying force to the side and push the trunk down from the outside to close it. ■ Trunk light The trunk light turns on when the trunk is opened. ■…
• Page 200
  3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving ● Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the trunk may be thrown out, causing an accident.
• Page 201
  ● Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.

• Page 202: Smart Entry & Start System

  3-2. Opening, closing and locking the doors  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●…

• Page 203
  3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors (vehicles with entry func- tion) The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the front out- side door handles.
• Page 204
  3-2. Opening, closing and locking the doors Alarm Situation Correction procedure An attempt was made Close all of the doors to lock the vehicle while and lock the doors a door was open. again. Exterior alarm sounds The trunk was closed once for 5 seconds while the electronic key Retrieve the electronic…
• Page 205
  3-2. Opening, closing and locking the doors ■ Electronic Key Battery-Saving Function When battery-saving mode is set, battery depletion is minimized by stopping the electronic key from receiving radio waves. Press twice while pressing and holding . Confirm that the electronic key indicator flashes 4 times.
• Page 206
  3-2. Opening, closing and locking the doors ■ Note for the entry function (if equipped) ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
• Page 207
  Fingernails may scrape against the door during operation of the door han- dle. Be careful not to injure fingernails or damage the surface of the door. : This setting can be customized at your Toyota dealer. ■ When the vehicle is not driven for extended periods ●…
• Page 208
  & start system antennas. (P. 200) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.

• Page 209: Adjusting The Seats

  3-3. Adjusting the seats Front seats Adjustment procedure Manual seat  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped) Power seat  Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (if equipped) Vertical height…

• Page 210
  3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.

• Page 211: Rear Seats

  3-3. Adjusting the seats Rear seats Folding type: The seatbacks of the rear seats can be folded down. Reclining type: The seatbacks of the rear seats can be adjusted to a comfortable position. Folding down the rear seatbacks (folding type) Pull the seatback lever in the trunk for the seatback you wish to fold down and then fold the seatback…

• Page 212
  3-3. Adjusting the seats Adjusting seatback angle (reclining type) Press to display the but- tons and then touch . The seatback moves as long as the button is touched and held. To move forward To move backward ■ Customization (reclining type) Changing the settings of the rear control panel (P.
• Page 213
  3-3. Adjusting the seats WARNING ■ When folding the seatbacks down (folding type) Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.

• Page 214: Driving Position Memory

  3-3. Adjusting the seats  Driving position memory This feature automatically adjusts the driver’s seat, steering wheel and outside rear view mirrors to make entering and exit- ing the vehicle easier or to suit your preferences. Driving position memory Your preferred driving position (the position of the driver’s seat, steer- ing wheel and outside rear view mirrors) can be recorded and recalled by pressing a button.

• Page 215
  ■ When the recorded seat position cannot be recalled The seat position may not be recalled in some situations when the seat posi- tion is recorded in a certain range. For details, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 216
  3-3. Adjusting the seats Memory recall function Each electronic key can be registered to recall your preferred driving position. Registering procedure ■ Record your driving position to button 1 or 2 before performing the following: Carry only the key you want to register, and then close the driver’s door.
• Page 217
  3-3. Adjusting the seats Cancelation procedure ■ Carry only the key you want to cancel and then close the driver’s door. If 2 or more keys are in the vehicle, the driving position cannot be canceled properly. Turn the engine switch to IGNITION ON mode. While pressing the “SET”…

• Page 218: Head Restraints

  3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Adjustable type  Pull the head restraint up. Down Push the head restraint down while pressing the lock release button. Lock release button Integrated type  Head restraints cannot be adjusted or removed. ■…

• Page 219
  3-3. Adjusting the seats ■ Installing the head restraints Front seats and reclining type rear outboard seats  Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
• Page 220
  3-3. Adjusting the seats WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●…

• Page 221: Steering Wheel

  3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Manual type  Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.

• Page 222
  3-4. Adjusting the steering wheel and mirrors Auto tilt away (power type) When the engine switch is turned off, the steering wheel returns to its stowed position by moving up and away to enable easier driver entry and exit. Turning the engine switch to ACCESSORY or IGNITION ON mode will return the steering wheel…

• Page 223: Inside Rear View Mirror

  3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.

• Page 224
  3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in ON mode, the indica- tor illuminates.

• Page 225: Outside Rear View Mirrors

  3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Right Down Left CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 226
  3-4. Adjusting the steering wheel and mirrors Folding and extending the mirrors Manual type  Push the mirror back in the direc- tion of the vehicle’s rear. Power type  Folds the mirrors Extends the mirrors Vehicles with an automatic folding/ extending mirror function: Putting the outside rear view mirror folding switch in the neutral posi-…
• Page 227
  3-4. Adjusting the steering wheel and mirrors Linked mirror function when reversing (if equipped) When the mirror select switch is in the “L” or “R” position, the outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. To disable this function, select neither “L”…
• Page 228
  3-4. Adjusting the steering wheel and mirrors WARNING ■ Important points while driving Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ●…

• Page 229: Opening And Closing

  3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.

• Page 230
  3-5. Opening and closing the windows ■ The power windows can be operated when Vehicles without a smart entry & start system  The engine switch is in the “ON” position. Vehicles with a smart entry & start system  The engine switch is in IGNITION ON mode.
• Page 231
  1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 232
  Except for Korea: The power windows can be opened and closed using the  wireless remote control. P. 186) : These settings must be customized at your Toyota dealer. ■ Alarm (if equipped) The alarm may be triggered if the alarm is set and a power window is closed using the door lock linked power window operation function.
• Page 233
  3-5. Opening and closing the windows WARNING Observe the following precautions. Failing to do so may result in death or serious injury. ■ Opening and closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers.

• Page 234: Moon Roof

  3-5. Opening and closing the windows  Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing Opens the moon roof The moon roof stops slightly before the fully open position to reduce wind noise.

• Page 235
  The moon roof can be opened and closed using the mechanical key. (P. 637) ● The moon roof can be opened and closed using the wireless remote con- trol. (P. 186) : These settings must be customized at your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 236
  If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. ■ Moon roof open warning buzzer A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s…
• Page 237
  3-5. Opening and closing the windows WARNING Observe the following precautions. Failing to do so may cause death or serious injury. ■ Opening the moon roof ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.

• Page 238: Panoramic Moon Roof

  3-5. Opening and closing the windows  Panoramic moon roof Use the overhead switches to operate the panoramic moon roof and electronic sunshade. Opening and closing the electronic sunshade Opens the electronic sunshade Slide and hold the switch backward. The electronic sun- shade will fully open automati- cally.

• Page 239
  3-5. Opening and closing the windows Opening and closing the panoramic moon roof Opens the panoramic moon roof Slide and hold the switch backward. The panoramic moon roof and electronic sunshade will open automatically. The panoramic moon roof can be opened from the tilt-up position.
• Page 240
  Except for Korea: The panoramic moon roof can be opened and closed using the wireless remote control. (P. 186) : These settings must be customized at your Toyota dealer. ■ Closing both the panoramic moon roof and electronic sunshade Slide the switch forward.
• Page 241
  If the panoramic moon roof or electronic sunshade does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■ Alarm (if equipped) The alarm may be triggered if the alarm is set and the panoramic moon roof is closed using the door lock linked panoramic moon roof operation function.
• Page 242
  3-5. Opening and closing the windows WARNING Observe the following precautions. Failing to do so may cause death or serious injury. ■ Opening and closing the electronic sunshade ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the electronic sunshade is being oper- ated.
• Page 243
  3-5. Opening and closing the windows WARNING ■ Jam protection function ● Never use any part of your body to intentionally activate the jam protection function. ● The jam protection function may not work if something gets caught just before the panoramic moon roof or electronic sunshade is fully closed. Also, the jam protection function is not designed to operate while the switch is being pressed.

• Page 244: Driving

  4-1. Before driving Driving the vehicle …..244 Cargo and luggage ….252 Trailer towing …..253 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ….254 Engine (ignition) switch (vehicles with a smart entry & start system) ….256 Continuously variable transmission ….261 Automatic transmission..266…

• Page 245
  Driving 4-5. Using the driving Toyota parking support systems assist-sensor ….388 Toyota Safety Sense ..301 RCTA (Rear Cross Traffic Alert) …..398 PCS (Pre-Collision System) ……307 • RCTA function ….400 LTA (Lane Tracing Rear Camera Detection Assist)……325 Function……405 RSA (Road Sign Assist) ..340 PKSB (Parking Support Brake) ……409…

• Page 246: Driving The Vehicle

  4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 254, 256 Driving With the brake pedal depressed, shift the shift lever to D. (P. 261, 266) Release the parking brake. (P. 273) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.

• Page 247
  4-1. Before driving Starting off on a steep uphill Make sure that the parking brake is set and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. Sudden start restraint control (Drive-Start Control [DSC]) When the following unusual operation is performed with the accelera- tor pedal depressed, the engine output may be restrained.
• Page 248
  TRC (P. 371) so that the vehicle may become able to escape from the mud or fresh snow. ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ●…
• Page 249
  4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ■…
• Page 250
  ■ If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
• Page 251
  4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine. If the shift lever is any position other than P or N, the vehicle may acceler- ate suddenly and unexpectedly, causing an accident.
• Page 252
  4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Always apply the parking brake, shift the shift lever to P, stop the engine and lock the vehicle.
• Page 253
  Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●…

• Page 254: Cargo And Luggage

  4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: WARNING ■ Things that must not be carried in the trunk The following things may cause a fire if loaded in the trunk: ●…

• Page 255: Trailer Towing

  Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.

• Page 256: Engine (Ignition) Switch

  4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position and start the engine.

• Page 257
  Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 258: Engine (Ignition) Switch (Vehicles With A

  4-2. Driving procedures Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.

• Page 259
  4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal released. (The mode changes each time the switch is pressed.) The emergency flashers can be used. The multi-information display will not be displayed.
• Page 260
  If the engine does not start ● The engine immobilizer system may not have been deactivated. (P. 115) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
• Page 261
  When a message requesting the smart entry & start system be inspected is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted P.
• Page 262
  Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.

• Page 263: Continuously Variable Transmission

  4-2. Driving procedures  Continuously variable transmission Shifting the shift lever Vehicles without a smart entry & start system: While the engine switch is in the “ON” position and the brake pedal depressed , shift the shift lever while pushing the shift release button on the shift knob.

• Page 264
  4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving 10-speed sport sequential shiftmatic mode driving (P. 262) : To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving.
• Page 265
  M This may indicate a malfunction in the continuously variable transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.)
• Page 266
  If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
• Page 267
  When the warning message goes out, the vehicle can be driven again. If the warning message does not go out after waiting a while, have your vehi- cle inspected by your Toyota dealer. WARNING ■…

• Page 268: Automatic Transmission

  4-2. Driving procedures Automatic transmission Shifting the shift lever Vehicles without a smart entry & start system: While the engine switch is in the “ON” position and the brake pedal depressed , shift the shift lever while pushing the shift release button on the shift knob.

• Page 269
  4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving S mode driving (P. 267) : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
• Page 270
  4-2. Driving procedures Shift ranges and their functions ■ Meter display Function A gear in the range between 1 and the selected S2 — S8 gear is automatically chosen depending on vehicle speed and driving conditions Setting the gear at 1 A lower shift range will provide greater engine braking forces than a higher shift range.
• Page 271
  4-2. Driving procedures ■ Automatic deactivation of shift range selection in the D position (vehi- cles with paddle shift switches) Shift range selection in the D position will be deactivated in the following situ- ations: ● The “+” paddle shift switch is held down for a period of time ●…
• Page 272
  If the shift lever cannot be shifted even though the brake pedal is depressed and the shift release button is pushed, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
• Page 273
  4-2. Driving procedures ■ AI-SHIFT The AI-SHIFT automatically selects the suitable gear according to driver per- formance and driving conditions. The AI-SHIFT automatically operates when the shift lever is in D. (Shifting the shift lever to the S position or paddle shifting cancels the function.) WARNING ■…

• Page 274: Turn Signal Lever

  4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.

• Page 275: Parking Brake

  4-2. Driving procedures Parking brake A mode can be selected from the following modes. Automatic mode The parking brake is set or released automatically according to the shift lever operation. Even when in automatic mode, the parking brake can be set and released manually.

• Page 276
  4-2. Driving procedures Manual mode The parking brake can be set and released manually. Sets the parking brake The parking brake indicator light and parking brake light will turn on. Pull and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
• Page 277
  Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Parking brake operation sound When the parking brake operates, a motor sound (whirring sound) may be heard.
• Page 278
  When the parking brake cannot be released due to a malfunction Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. Contact your Toyota dealer immediately if this occurs. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 279: Brake Hold

  4-2. Driving procedures Brake Hold The brake hold system keeps the brake applied when the shift lever is in D, S (vehicles with an automatic transmission), M (vehicles with a continuously variable transmission) or N with the system on and the brake pedal has been depressed to stop the vehicle.

• Page 280
  Make sure that the parking brake indicator light goes off. (P. 273) ■ When an inspection at your Toyota dealer is necessary When the brake hold standby indicator (green) does not illuminate even when the brake hold switch is pressed with the brake hold system operating condi- tions met, the system may be malfunctioning.

• Page 281: Headlight Switch

  4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Operating the switch turns on the lights as follows: Type A  The headlights, day- time running lights (  281) and all the lights listed below turn on and off automatically.

• Page 282
  4-3. Operating the lights and wipers Type B  The headlights, day- time running lights  P. 281) and all the lights listed below turn on and off automati- cally. (Vehicles without smart entry & start sys- tem: When the engine switch is in the “ON”…
• Page 283
  4-3. Operating the lights and wipers ■ Daytime running light system To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch off or in the position.
• Page 284
  4-3. Operating the lights and wipers Type B (Vehicles with a smart entry & start system)  ● When the headlights are on: The headlights and tail lights turn off 30 sec- onds after the engine switch is turned to ACCESSORY mode or turned off and a door is opened and closed.
• Page 285
  4-3. Operating the lights and wipers NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 286: Ahb (Automatic High Beam)

  4-3. Operating the lights and wipers  AHB (Automatic High Beam) The Automatic High Beam uses a front camera located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and automatically turns the high beams on or off as necessary.

• Page 287
  4-3. Operating the lights and wipers Turning the high beams on/off manually Switching to the high beams ■ Push the lever away from you. The Automatic High Beam indi- cator will turn off and the high beam indicator will turn on. Pull the lever to its original posi- tion to activate the Automatic High Beam system again.
• Page 288
  4-3. Operating the lights and wipers ■ Conditions to turn the high beams on/off automatically ● When all of the following conditions are met, the high beams will be turned on automatically (after approximately 1 second): • The vehicle speed is approximately 30 km/h (19 mph) or more.
• Page 289
  4-3. Operating the lights and wipers ● In the following situations the system may not be able to correctly detect the surrounding brightness level. This may cause the low beams to remain on or the high beams to flash or dazzle pedestrians or vehicles ahead. In such a case, it is necessary to manually switch between the high and low beams.

• Page 290: Fog Light Switch

  4-3. Operating the lights and wipers  Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Front fog light switch  Turns the front fog lights Turns the front fog lights Rear fog light switch …

• Page 291
  4-3. Operating the lights and wipers Front and rear fog light switch  Turns the front and rear fog lights off Turns the front fog lights Turns both front and rear fog lights on Releasing the switch ring returns it Operating the switch ring again turns only the rear fog light off.

• Page 292: Windshield Wipers And Washer

  4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Intermittent windshield wipers with interval adjuster  Operating the lever operates the wipers or washer as follows. When intermittent windshield wiper operation is selected, wiper inter- val can be also adjusted.

• Page 293
  4-3. Operating the lights and wipers Washer/wiper dual oper- ation Pulling the lever operates the wip- ers and washer. The wipers will automatically oper- ate a couple of times after the washer squirts. (After operating several times, the wipers operate once more time after a short delay to prevent drip- ping.
• Page 294
  4-3. Operating the lights and wipers Increases rain-sensing windshield wiper sensitivity Decreases rain-sensing windshield wiper sensitivity Washer/wiper dual oper- ation Pulling the lever operates the wip- ers and washer. The wipers will automatically oper- ate a couple of times after the washer squirts.
• Page 295
  4-3. Operating the lights and wipers ■ Raindrop sensor (vehicles with rain-sensing windshield wipers) ● The raindrop sensor judges the amount of raindrops. An optical sensor is adopted. It may not operate properly when sunlight from the rising or setting of the sun intermittently strikes the windshield, or if bugs etc.
• Page 296
  Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 297
  4-3. Operating the lights and wipers Changing the windshield wiper rest position/Lifting the wind- shield wipers When the windshield wipers are not being used, they retract to below the hood. To enable the windshield wipers to be lifted when parking in cold conditions or when replacing a windshield wiper insert, change the rest position of the windshield wipers to the service position using the wiper lever.
• Page 298
  4-3. Operating the lights and wipers ■ Lowering the windshield wipers to the retracted position With the windshield wipers placed on the windshield, turn the engine switch to “ON” position (vehicles without a smart entry & start system) or IGNITION ON mode (vehicles with a smart entry &…

• Page 299: Refueling

  ● Confirm the type of fuel. ■ Fuel types P. 671 ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 300
  4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
• Page 301
  4-4. Refueling Opening the fuel tank cap Press and hold the opener switch to open the fuel filler door. Left-hand drive vehicles Right-hand drive vehicles   Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door.
• Page 302
  WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.

• Page 303: Using The Driving Support Systems

  ■ Toyota Safety Sense The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.

• Page 304
  Do not subject the radar sensor or its surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
• Page 305
  Do not dirty or damage the front camera. When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens of the front camera. Also, do not touch the lens. If the lens is dirty or damaged, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 306
  ● Do not attach any accessories to the hood, front grille or front bumper that may obstruct the front camera. Contact your Toyota dealer for details. ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the front camera.
• Page 307
  In the following situations, perform the actions specified in the table. When the normal operating conditions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions…
• Page 308
  If the message does not disappear, contact your Toyota dealer. • When the temperature around the radar sensor is outside of the opera- tional range, such as when the vehicle is in the sun or in an extremely cold environment •…

• Page 309: Pcs (Pre-Collision System)

  The countries and areas for each region listed in the table are current as of February 2021. However, depending on when the vehicle was sold, the countries and areas of each region may be different. Contact your Toyota dealer for details.

• Page 310
  4-5. Using the driving support systems System functions Pre-collision warning ■ When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
• Page 311
  4-5. Using the driving support systems Intersection right/left turn assistance (for region A) ■ If the system determines that there is a high possibility of a collision in the following situations, it will assist with Pre-collision warning and, if necessary Pre-collision braking. Depending on the configuration of the intersection, it may not be possible to support.
• Page 312
  4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
• Page 313
  4-5. Using the driving support systems WARNING ■ Pre-collision braking ● When the pre-collision braking function is operating, a large amount of braking force will be applied. ● If the vehicle is stopped by the operation of the pre-collision braking func- tion, the pre-collision braking function operation will be canceled after approximately 2 seconds.
• Page 314
  4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●…
• Page 315
  4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system ■ The pre-collision system can be enabled/disabled on (4.2-inch display) or (7-inch display) (P. 140, 155) of the multi-informa- tion display. Vehicles without a smart entry & start system: The system is automati- cally enabled each time the engine switch is turned to the “ON”…
• Page 316
  4-5. Using the driving support systems Changing the pre-collision warning timing ■ The pre-collision warning timing can be changed on (4.2-inch display) or (7-inch display) (P. 140, 155) of the multi-informa- tion display. The warning timing setting is retained when the engine switch is turned off.
• Page 317
  4-5. Using the driving support systems ■ Operational conditions for each pre-collision function The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a detected object is high. The system may not operate in the following situations: •…
• Page 318
  4-5. Using the driving support systems ● Pre-collision braking Relative speed Detectable objects Vehicle speed between your vehicle and object Preceding Approx. 10 to 180 km/h (7 to Approx. 10 to 180 stopped vehicles 110 mph) km/h (7 to 110 mph) For region A and Approx.
• Page 319
  4-5. Using the driving support systems ● Intersection right/left turn assistance (pre-collision warning) (for region A) When the turn signal lights are not flashing, support for turning left or right at an intersection which targets oncoming vehicles does not work. Relative speed Detectable Oncoming vehi-…
• Page 320
  4-5. Using the driving support systems ■ Object detection function The system detects objects based on Region A and B  their size, profile, motion, etc. However, an object may not be detected depending on the surrounding brightness and the motion, posture, angle…
• Page 321
  4-5. Using the driving support systems ■ Conditions under which the system may operate even if there is no pos- sibility of a collision ● In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate. •…
• Page 322
  4-5. Using the driving support systems • When a detectable object approaches very close and then stops before entering the path of your vehicle • If the front of your vehicle is raised or lowered, such as when on an uneven or undulating road surface •…
• Page 323
  4-5. Using the driving support systems • For region A: While making a right/left turn, when an oncoming vehicle turns right/left in front of your vehicle • For region A: While steering into the direction of oncoming traffic ■ Situations in which the system may not operate properly ●…
• Page 324
  4-5. Using the driving support systems • If a vehicle ahead is a motorcycle or bicycle (for region C) • If a vehicle ahead is narrow, such as a personal mobility vehicle • If a preceding vehicle has a small rear end, such as an unloaded truck •…
• Page 325
  4-5. Using the driving support systems • If your vehicle is skidding • If the front of the vehicle is raised or lowered • If the wheels are misaligned • If a wiper blade is blocking the front camera • The vehicle is being driven at extremely high speeds •…
• Page 326
  4-5. Using the driving support systems ● In some situations such as the following, sufficient braking force or steering force (for region A) may not be obtained, preventing the system from per- forming properly: • If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet •…

• Page 327: Lta (Lane Tracing Assist)

  4-5. Using the driving support systems  LTA (Lane Tracing Assist) Summary of functions While driving on a road with clear white (yellow) lane lines, the LTA system warns the driver if the vehicle may deviate from the current lane or course , and also can slightly operate the steering wheel to help avoid deviation from the lane or course .

• Page 328
  Toyota dealer. ● Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 329
  4-5. Using the driving support systems WARNING ■ Conditions in which functions may not operate properly In the following situations, the functions may not operate properly and the vehicle may depart from its lane. Drive safely by always paying careful attention to your surroundings and operate the steering wheel to correct the path of the vehicle without relying solely on the functions.
• Page 330
  4-5. Using the driving support systems WARNING ● Vehicle is driven where the road diverges, merges, etc. ● Repair marks of asphalt, white (yellow) lines, etc. are present due to road repair. ● There are shadows on the road that run parallel with, or cover, the white (yellow) lines.
• Page 331
  4-5. Using the driving support systems WARNING ● Light from the headlights of an oncoming vehicle, the sun, etc. enters the camera. ● The vehicle is driven on a slope. ● The vehicle is driven on a road which tilts left or right, or a winding road. ●…
• Page 332
  4-5. Using the driving support systems Functions included in LTA system ◆ Lane departure alert function When the system determines that the vehicle might depart from its lane or course warning is displayed on the multi-information display, and a warning buzzer will sound to alert the driver.
• Page 333
  4-5. Using the driving support systems ◆ Steering assist function When the system determines that the vehicle might depart from its lane or course , the system provides assistance as necessary by operating the steering wheel small amounts for a short period of time to keep the vehicle in its lane.
• Page 334
  4-5. Using the driving support systems ◆ Vehicle sway warning function When the vehicle is swaying within a lane, the warning buzzer will sound and a mes- sage will be displayed on the multi-information display to alert the driver. ◆ Lane centering function This function is linked with dynamic radar cruise control…
• Page 335
  4-5. Using the driving support systems LTA system setting Turning the lane centering function ON/OFF ■ Press the LTA switch. The lane centering function will change between ON/OFF each time the switch is pressed. The current setting will be dis- played on the multi-information display.
• Page 336
  4-5. Using the driving support systems Indications on the multi-information display The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display. LTA indicator The illumination condition of the indicator informs the driver of the system operation status.
• Page 337
  4-5. Using the driving support systems Lane departure alert function display Displayed when the multi-information display is switched to the driving assist system information display. Inside of displayed lines is Inside of displayed lines is   white black Indicates that the system is recog- Indicates that the system is not nizing white (yellow) lines or a able to recognize white (yellow)
• Page 338
  4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LTA is turned on. • Vehicle speed is approximately 50 km/h (32 mph) or more. •…
• Page 339
  4-5. Using the driving support systems • The dynamic radar cruise control with full-speed range is operating in vehicle-to-vehicle distance control mode. • Width of traffic lane is approximately 3 to 4 m (10 to 13 ft.). • Turn signal lever is not operated. •…
• Page 340
  4-5. Using the driving support systems ■ Hands off steering wheel warning In the following situations, a warning mes- sage urging the driver to hold the steering wheel and the symbol shown in the illus- tration are displayed on the multi-informa- tion display to warn the driver.
• Page 341
  ● “LTA Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. ● “LTA Unavailable” The system is temporarily canceled due to a malfunction in a sensor other than the front camera.

• Page 342: Rsa (Road Sign Assist)

  4-5. Using the driving support systems  RSA (Road Sign Assist) Summary of function The RSA system recognizes spe- cific road signs using the front camera and/or navigation system (when speed limit information is available) to provide information to the driver via the display. Front camera If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc.

• Page 343
  4-5. Using the driving support systems Indication on the multi-information display When the front camera recognizes a sign and/or information of a sign is available from the navigation system, the sign will be displayed on the multi-information display. ● When the driving assist system information is selected, a maxi- mum of 3 signs can be dis- played.
• Page 344
  4-5. Using the driving support systems Supported types of road signs The following types of road signs, including electronic signs and blink- ing signs, are recognized. A non-official (not meeting the Vienna Convention) or a recently introduced traffic sign may not be recognized. ●…
• Page 345
  4-5. Using the driving support systems ● No-overtaking road signs Road signs Type Road signs Type overtaking No overtaking ends begins ● Other road signs Road signs Type Road signs Type No-entry End of prohibition Stop : For vehicles with navigation system ●…
• Page 346
  4-5. Using the driving support systems Notification function In the following situations, the RSA system will notify the driver. ● When the vehicle speed exceeds the speed notification threshold of the speed limit sign displayed, the sign display will be emphasized and a buzzer will sound.
• Page 347
  ON. ■ If “RSA Malfunction Visit Your Dealer” is shown The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Some functions can be customized. (P. 154) CAMRY_GE…

• Page 348: Dynamic Radar Cruise Control With Full-Speed Range

  4-5. Using the driving support systems Dynamic radar cruise controlwith full-  speed range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.

• Page 349
  4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control with full-speed range ● Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your surroundings.
• Page 350
  4-5. Using the driving support systems WARNING ■ Cautions regarding the driving assist systems Observe the following precautions, as there are limitations to the assistance provided by the system. Failure to do so may cause an accident resulting in death or serious injury. ●…
• Page 351
  4-5. Using the driving support systems WARNING ■ Situations unsuitable for dynamic radar cruise control with full-speed range Do not use dynamic radar cruise control with full-speed range in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
• Page 352
  4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar to detect the presence of vehicles up to approximately 100 m (328 ft.) ahead, determines the current vehicle- to-vehicle following distance, and operates to maintain a suitable fol- lowing distance from the vehicle ahead.
• Page 353
  4-5. Using the driving support systems When the turn signal lever is operated and your vehicle moves to an over- taking lane while driving at 80 km/h (50 mph) or more, the vehicle will accelerate to help to overtake a passing vehicle. The system’s identification of what is an overtaking lane may be deter- mined solely based on the location of the steering wheel in the vehicle (left side driver position versus right side driver position.) If the vehicle is driven…
• Page 354
  4-5. Using the driving support systems Adjusting the set speed ● Adjusting the set speed by the switch To change the set speed, press the “+ RES” or “- SET” switch until the desired set speed is displayed. Increases the speed (Except when the vehicle has been stopped by system control in vehi- cle-to-vehicle…
• Page 355
  4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle-to-vehicle distance as fol- vehicle mark lows: Long Medium Short If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
• Page 356
  4-5. Using the driving support systems Resuming follow-up cruising when the vehicle has been stopped by system control (vehicle-to-vehicle distance control mode) After the vehicle ahead of you starts off, press the “+ RES” switch. Your vehicle will also resume fol- low-up cruising if the accelerator pedal is depressed after the vehi- cle ahead of you starts off.
• Page 357
  4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver.
• Page 358
  4-5. Using the driving support systems Operation display ■ Displayed when the vehicle speed is being reduced. When the vehicle speed reduc- tion ends, the display will disap- pear. Changing the settings of the curve speed reduction function ■ The curve speed reduction function can be enabled/disabled and the vehicle speed reduction strength can be adjusted.
• Page 359
  4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar, etc.
• Page 360
  4-5. Using the driving support systems Dynamic Radar Cruise Control with Road Sign Assist (if equipped) When this function is enabled and the system is operating in vehicle- to-vehicle distance control mode (P. 350), when a speed limit sign is detected, the recognized speed limit will be displayed with an up/ down arrow.
• Page 361
  • The driver’s door is opened. • The vehicle has been stopped for about 3 minutes If vehicle-to-vehicle distance control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system. Contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 362
  The parking brake is operated. If constant speed control mode is automatically canceled for any reasons other than the above, there may be a malfunction in the system. Contact your Toyota dealer. ■ Situations in which the curve speed reduction function may not operate…
• Page 363
  4-5. Using the driving support systems ■ When the sensor may not be correctly detecting the vehicle ahead In the case of the following and depending on the conditions, operate the brake pedal when deceleration of the system is insufficient or operate the accelerator pedal when acceleration is required.
• Page 364
  4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.

• Page 365: Cruise Control

  4-5. Using the driving support systems  Cruise control Use the cruise control to maintain a set speed without depress- ing the accelerator pedal. System Components Meter display ■ Set speed Indicators Operation switches ■ “+ RES” switch Cruise control main switch Cancel switch “- SET”…

• Page 366
  4-5. Using the driving support systems Setting the vehicle speed Press the cruise control main switch to activate the cruise control. Cruise control indicator will be dis- played. Press the switch again to deacti- vate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and press the “- SET”…
• Page 367
  4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the “+ RES” or “- SET” switch until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Press the switch. Large adjustment: Press and hold the switch to change the speed, and release when the desired…
• Page 368
  If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 369
  4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the cruise control main switch when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.

• Page 370: Driving Assist Systems

  4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.

• Page 371
  4-5. Using the driving support systems ◆ EPS (Electric Power Steering) Employs an electric motor to reduce the amount of effort needed to turn the steering wheel ◆ Emergency brake signal When the brakes are applied suddenly, the emergency flashers automatically flash to alert the vehicle behind.
• Page 372
  4-5. Using the driving support systems Disabling the TRC system If the vehicle gets stuck in mud, dirt or snow, the TRC system may reduce power from the engine to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it.
• Page 373
  TRC has been disabled even if has not been pressed TRC is temporary deactivated. If the information continues to show, contact your Toyota dealer. ■ Operating conditions of hill-start assist control When the following four conditions are met, the hill-start assist control will operate: ●…
• Page 374
  4-5. Using the driving support systems ■ Sounds and vibrations caused by the ABS, brake assist, VSC, TRC and hill-start assist control systems ● A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move.
• Page 375
  4-5. Using the driving support systems ■ Operating conditions of emergency brake signal When the following three conditions are met, the emergency brake signal will operate: ● The emergency flashers are off ● Actual vehicle speed is over 55 km/h (35 mph) ●…
• Page 376
  4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■…
• Page 377
  The ABS, TRC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.

• Page 378: Bsm (Blind Spot Monitor)

  4-5. Using the driving support systems  1, 2 BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that uses rear side radar sen- sors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when chang- ing lanes.

• Page 379
  4-5. Using the driving support systems Turning the BSM function on/off Press of the meter control switches, select Press of the meter control switches, select Press of the meter control switch. Each time is pressed, the function changes on/off. Setting the outside rear view mirror indicator brightness The brightness of the indicators on the outside rear view mirrors can be changed on (P.
• Page 380
  Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 381: Bsm Function

  4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is usually not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.

• Page 382
  4-5. Using the driving support systems ■ The BSM function is operational when ● The BSM function is turned on ● Vehicle speed is greater than approximately 16 km/h (10 mph). ■ The BSM function will detect a vehicle when ●…
• Page 383
  4-5. Using the driving support systems ● Instances of the BSM function unnecessarily detecting a vehicle and/or object may increase under the following conditions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •…

• Page 384: Bsm (Blind Spot Monitor)

  4-5. Using the driving support systems  1, 2 BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that uses rear side radar sen- sors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when chang- ing lanes.

• Page 385
  4-5. Using the driving support systems Turning the BSM function on/off Vehicles with 4.2-inch multi-information display  Press of the meter control switches, select Press of the meter control switches, select Press of the meter control switch. Each time is pressed, the function changes on/off. Vehicles with 7-inch multi-information display …
• Page 386
  Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 387: Bsm Function

  4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect the following vehicles traveling in an adjacent lane in the area that is usually not reflected in the outside rear view mirror (the blind spot), and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors.

• Page 388
  4-5. Using the driving support systems Approximately 3 m (9.8 ft.) to 60 m (197 ft.) from the rear bumper The greater the difference in speed between your vehicle and the detected vehicle is, the farther away the vehicle will be detected, causing the out- side rear view mirror indicator to illuminate or flash WARNING ■…
• Page 389
  4-5. Using the driving support systems ■ Conditions under which the BSM function may not function correctly ● The BSM function may not detect vehicles correctly in the following condi- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •…

• Page 390: Toyota Parking Assist-Sensor

  Press of the meter control switches, select Press of the meter control switch. When the Toyota parking assist-sensor function is disabled, the Toyota parking assist-sensor OFF indicator (P. 127) illuminates. To re-enable the system, select on the multi-information display, select and turn it on.

• Page 391
  • When the shift position is changed • When the vehicle speed exceeds a certain speed. • When the Toyota parking assist-sensor is turned off once and turned on again • When the engine switch is turned off once and turned to IGNITION ON mode again •…
• Page 392
  4-5. Using the driving support systems Sensor detection display, object distance (Vehicles without Park- ing Support Brake) Distance display ■ Approximate distance to object Display Rear center sensor Front and rear (if equipped) corner sensor 150 cm (4.9 ft.) to …
• Page 393
  4-5. Using the driving support systems Buzzer operation and distance to an object ■ A buzzer sounds when the sensors are operating. ● The buzzer sounds faster as the vehicle approaches an object. When the vehicle comes within the following distance of the object, the buzzer sounds continuously: Approximately 35 cm (1.2 ft.).
• Page 394
  4-5. Using the driving support systems Sensor detection display, object distance (Vehicles with Parking Support Brake) Distance display ■ Approximate distance to object Display Front and rear Front and rear center sensor corner sensor Front center sensor: 100 cm (3.3 ft.) to 60 cm (2.0 ft.) …
• Page 395
  4-5. Using the driving support systems Buzzer operation and distance to an object ■ A buzzer sounds when the sensors are operating. ● The buzzer sounds faster as the vehicle approaches an object. When the vehicle comes within the following distance of the object, the buzzer sounds continuously: Approximately 30 cm (1.0 ft).
• Page 396
  The buzzer volume can be changed on the multi-information display (P. 141, 157) when the engine switch is in IGNITION ON mode. ■ The Toyota parking assist-sensor can be operated when ● The engine switch is in IGNITION ON mode.
• Page 397
  4-5. Using the driving support systems WARNING ■ When using the Toyota parking assist-sensor Observe the following precautions. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. ● Do not use the sensor at speeds in excess of 10 km/h (6 mph).
• Page 398
  The area directly under the bumpers is not detected. ● If objects draw too close to the sensor. ● A non-genuine Toyota suspension (lowered suspension, etc.) is installed. ● A backlit license plate is installed. In addition to the examples above, there are instances in which, because of their shape, signs and other objects may be judged by a sensor to be closer than they are.
• Page 399
  When using Toyota parking assist-sensor In the following situations, the system may not function correctly due to a sensor malfunction, etc. Have the vehicle checked by your Toyota dealer. ● The Toyota parking assist-sensor operation display flashes, and a buzzer sounds when no objects are detected.

• Page 400: Rcta (Rear Cross Traffic Alert)

  4-5. Using the driving support systems  RCTA (Rear Cross Traffic Alert) The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up.

• Page 401
  4-5. Using the driving support systems Turning the RCTA function on/off Vehicles with 4.2-inch multi-information display  Press of the meter control switches, select Press of the meter control switches, select Press of the meter control switch. Each time is pressed, the function changes on/off. Vehicles with 7-inch multi-information display …

• Page 402: Rcta Function

  RCTA icon display (if equipped) ■ When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the audio sys- tem screen. Toyota parking Panoramic view Content assist monitor monitor…

• Page 403
  4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The RCTA function is only an assist and is not a replacement for careful driving.
• Page 404
  4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle…
• Page 405
  4-5. Using the driving support systems ■ Conditions under which the RCTA function will not detect a vehicle The RCTA function is not designed to detect the following types of vehicles and/or objects: ● Small motorcycles, bicycles, pedestrians, etc. ● Vehicles approaching from directly behind ●…
• Page 406
  4-5. Using the driving support systems ● Instances of the RCTA function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When a vehicle passes by the side of your vehicle • When the parking space faces a street and vehicles are being driven on the street •…

• Page 407: Rear Camera Detection Function

  4-5. Using the driving support systems  Rear Camera Detection Function When the vehicle is backing up, the rear camera detection func- tion can detect pedestrians in the detection area behind the vehicle. If a pedestrian is detected, a buzzer will sound and an icon on the audio system screen will be displayed to inform the driver of the pedestrian.

• Page 408
  4-5. Using the driving support systems When a pedestrian is detected If the rear camera detection func- tion detects a pedestrian in the detection area, the buzzer and icon will operate as shown in the following table: Area Buzzer Icon Sounds repeatedly When the vehicle is stationary: Blinks 3 times and then stays on…
• Page 409
  4-5. Using the driving support systems ■ Setting the buzzer volume The buzzer volume can be adjusted with the RCTA buzzer volume on the multi-information display. (P. 141, 156) ■ Muting the buzzer sound The buzzer can be temporarily muted by pressing of the meter control switches while an object detection display is shown on the multi-information display.
• Page 410
  4-5. Using the driving support systems ● In some situations, such as the following, the Rear Camera Detection func- tion may operate even though there are no pedestrians in the detection area. • When a three dimensional object, such as a pole, traffic cone, fence, or parked vehicle, is detected •…

• Page 411: Pksb (Parking Support Brake)

  4-5. Using the driving support systems  PKSB (Parking Support Brake) The Parking Support Brake system consists of the following functions that operate when driving at a low speed or backing up, such as when parking. When the system determines that the possibility of a collision with a detected object is high, a warning operates to urge the driver to take evasive action.

• Page 412
  4-5. Using the driving support systems Types of sensors Front corner sensors Front center sensors Rear corner sensors Rear center sensors Turning the Parking Support Brake on/off The Parking Support Brake can be enabled/disabled on the multi- information display. All of the Parking Support Brake functions (static objects and rear-crossing vehicles) are enabled/disabled simultane- ously.
• Page 413
  4-5. Using the driving support systems Displays and buzzers for engine output restriction control and brake control If the engine output restriction control or brake control operates, a buzzer will sound and a message will be displayed on the multi-infor- mation display to alert the driver.
• Page 414
  4-5. Using the driving support systems Parking Support Brake function If the Parking Support Brake detects that a collision with an object is possible, the engine output will be restricted to restrain any increase in the vehicle speed. (Engine output restriction control: See A below.) Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed.
• Page 415
  4-5. Using the driving support systems Time Down Time Down Time Accelerator pedal Start of control Brake pedal High possibility of a collision Engine output Extremely high possibility of a collision Braking force CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 416
  Toyota dealer. ● A sensor may be frozen. Once the ice melts, the system will return to nor- mal.
• Page 417
  4-5. Using the driving support systems WARNING ■ Limitations of the Parking Support Brake system Do not overly rely on the system, as doing so may lead to an accident. Always drive while checking the safety of the surroundings of the vehicle. Depending on the vehicle and road conditions, weather, etc., the system may not operate.

• Page 418: Parking Support Brake Function (Static Objects)

  4-5. Using the driving support systems Parking Support Brake function (static  objects) If a collision with an object may occur due to the vehicle sud- denly moving forward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong shift position being selected, or while parking or traveling at low speeds, the sensors detect objects, such as a wall, in the traveling direction of the vehicle, and the system…

• Page 419
  4-5. Using the driving support systems When the accelerator pedal is depressed excessively ■ When the vehicle moves in the unintended direction due to the ■ wrong shift position being selected CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 420
  The detection range of the Parking Support Brake function differs from the detection range of the Toyota parking assist-sensor. (P. 393) Therefore, even if the Toyota parking assist-sensor detects an object and pro- vides a warning, the Parking Support Brake function may not start operating.
• Page 421
  (P. 388), if the Parking Support Brake system is enabled (P. 410), the front or rear sensors detect an object and brake control is performed, the Toyota parking assist-sensor buzzer will sound to notify the driver of the approximate distance to the object.
• Page 422
  4-5. Using the driving support systems ■ Situations in which the Parking Support Brake function (static objects) may operate even if there is no possibility of a collision In some situations such as the following, the Parking Support Brake function may operate even though there is no possibility of a collision.
• Page 423
  4-5. Using the driving support systems ● Changes in the vehicle posture • If the vehicle is significantly tilted • If the front of the vehicle is raised or lowered due to the carried load • If the orientation of a sensor has been changed due to a collision or other impact •…
• Page 424
  4-5. Using the driving support systems • When the sensor is frozen (Once the sensor thaws, the system will return to normal) ● Vehicle surroundings • When an object that cannot be detected is between the vehicle and a detected object •…
• Page 425
  ● If the area around a sensor is subjected to an impact, the system may not operate properly due to the sensor being misaligned. Have the vehicle inspected by your Toyota dealer. ■ Handling the suspension Do not modify the suspension, as changes to the height or inclination of the vehicle may prevent the sensors from detecting objects correctly or cause the system to not operate or operate unnecessarily.
• Page 426
  4-5. Using the driving support systems NOTICE ■ Notes when washing the vehicle Do not apply intensive bursts of water or steam to the sensor area. Doing so may result in the sensor malfunctioning. ● When using a high pressure washer to wash the vehicle, do not spray the sensors directly, as doing so may cause a sensor to malfunction.

• Page 427: Parking Support Brake Function (Rear-Crossing Vehicles)

  4-5. Using the driving support systems Parking Support Brake function (rear-  crossing vehicles) If a radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and the system determines that the possibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approach- ing vehicle.

• Page 428
  4-5. Using the driving support systems ■ The Parking Support Brake function (rear-crossing vehicles) will operate when The function will operate when the PKSB OFF indicator is not illuminated (P. 410, 414) and all of the following conditions are met: ●…
• Page 429
  4-5. Using the driving support systems ■ Re-enabling the Parking Support Brake function (rear-crossing vehicles) To re-enable the Parking Support Brake function (rear-crossing vehicles) when it is disabled while it is operating, either enable the Parking Support Brake system again (P. 410), or turn the engine switch off and then back to IGNITION ON mode.
• Page 430
  4-5. Using the driving support systems ■ Situations in which the system may operate even though there is no possibility of a collision In some situations such as the following, the Parking Support Brake function (rear-crossing vehicles) may operate even though there is no possibility of a collision.
• Page 431
  4-5. Using the driving support systems ■ Situations in which the Parking Support Brake function (rear-crossing vehicles) may not operate properly In some situations such as the following, this function may not operate prop- erly. ● Objects and vehicles which the radar sensors are not designed to detect •…
• Page 432
  4-5. Using the driving support systems • When backing out of a shallow angle parking spot • Vehicles that the sensors cannot detect due to obstructions • When backing up on a slope with a sharp change in grade • When a vehicle turns into the detec- tion area ■…
• Page 433
  If the area around a rear radar sensor is subjected to an impact, the sys- tem may not operate properly due to a sensor malfunction. Have the vehi- cle inspected by your Toyota dealer. ● Observe the rear radar sensor handling precautions. (P. 378)

• Page 434: Driving Mode Select Switches

  4-5. Using the driving support systems  Driving mode select switches The driving modes can be selected to suit driving condition. Normal mode Use for normal driving. While in Eco drive mode or sport mode, press the switch to change the driving mode to normal mode.

• Page 435
  4-5. Using the driving support systems ■ Operation of the air conditioning system in Eco drive mode Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency (P. 442, 447). To improve air conditioning performance, adjust the fan speed or turn off Eco drive mode.

• Page 436: 4-6. Driving Tips

  4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.

• Page 437
  If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains Vehicles with 16 and 17-inch tires …
• Page 438
  4-6. Driving tips Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca- tion and type of road. Always check local regulations before installing chains. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●…
• Page 439
  Repairing or replacing snow tires (vehicles with a tire pressure warn- ing system) Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valve and transmitters.

• Page 440: Eco-Friendly Driving Tips

  4-6. Driving tips Eco-friendly driving tips For improved fuel economy and reduced CO emissions, pay attention to the following points: ◆ Using Eco drive mode (vehicles with driving mode select switches) When using Eco drive mode, the torque corresponding to the accel- erator pedal depression amount can be generated more smoothly than it is in normal conditions.

• Page 441
  4-6. Driving tips ◆ Highway driving Control and maintain the vehicle at a constant speed. Before stop- ping at a toll booth or similar, allow plenty of time to release the accelerator pedal and gently apply the brakes. ◆ Air conditioning Use the air conditioning only when necessary.
• Page 442
  4-6. Driving tips ◆ Regular maintenance ● Make sure to check the tire inflation pressure frequently. Improper tire inflation pressure can cause poor fuel economy. Also, as snow tires can cause large amounts of friction, their use on dry roads can lead to poor fuel economy. Use tires that are appropriate for the season and road conditions.

• Page 443: Interior Features

  Interior features 5-1. Using the air conditioning 5-4. Other interior features system and defogger Other interior features..476 Manual air conditioning • Sun visors……476 system ……442 • Vanity mirrors ….476 Automatic air conditioning • Power outlet ….477 system ……447 • USB charging ports ..478 Heated steering wheel/ •…

• Page 444: Manual Air Conditioning

  5-1. Using the air conditioning system and defogger  Manual air conditioning system Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature. is not pressed, the system will blow ambient temperature air or heated air.

• Page 445
  5-1. Using the air conditioning system and defogger Change the airflow mode ■ To change the airflow mode, press Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates. Other functions Switching between outside air and recirculated air modes ■…
• Page 446
  5-1. Using the air conditioning system and defogger Defogging the rear window ■ A defogger is used to defog the rear window. Press The defogger will automatically turn off after a period of time. Air outlets Location of air outlets ■…
• Page 447
  5-1. Using the air conditioning system and defogger ■ For quick cooling Turn to “MAX A/C”. The air conditioning will automatically turn on. will be set for recirculated air mode when is selected. It is not possible to turn to the outside air mode. ■…
• Page 448
  5-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.

• Page 449: Automatic Air Conditioning System

  5-1. Using the air conditioning system and defogger  Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Front control panel ■ Rear control panel (if equipped) ■  : If equipped CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 450
  5-1. Using the air conditioning system and defogger Adjusting the temperature setting ■ Front control panel  To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the tempera- ture. is not pressed, the system will blow ambient temperature air or heated air.
• Page 451
  5-1. Using the air conditioning system and defogger Change the airflow mode ■ To change the airflow mode, press outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
• Page 452
  5-1. Using the air conditioning system and defogger Adjusting the temperature for driver and passenger seats sep- ■ arately (vehicles with dual control mode) To turn on the dual control mode, perform any of the following pro- cedures: ● Press ●…
• Page 453
  5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■…
• Page 454
  5-1. Using the air conditioning system and defogger Windshield wiper de-icer (if equipped) ■ This feature is used to prevent ice from building up on the wind- shield and wiper blades. The indicator comes on when the windshield wiper de-icer is The windshield wiper de-icer will automatically turn off after a period of time.
• Page 455
  5-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Front Rear …
• Page 456
  5-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
• Page 457
  5-1. Using the air conditioning system and defogger ■ nanoe (if equipped) The air conditioning system adopts nanoe technology. This helps to fill the cabin with refreshing air by emitting slightly acidic nanoe ions coated with water particles through the driver’s side vent. These particles are gentle to the skin and hair.
• Page 458
  5-1. Using the air conditioning system and defogger ■ Air conditioning filter P. 550 ■ Changing the settings of the rear control panel (if equipped) The following settings can be changed: ● Reaction time from when a button on the rear control panel is touched ●…
• Page 459
  5-1. Using the air conditioning system and defogger According to the following table, touch the appropriate button to change the desired setting and check that the button flashes the correct number of times. Button to be touched Function Setting Button display (right side) Longest Flashes 3 times…
• Page 460
  ■ nanoe (if equipped) Do not disassemble or repair the system because it contains high voltage parts. Contact your Toyota dealer if the system needs repair. NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.

• Page 461: Heated Steering Wheel/ Seat Heaters/ Seat Ventilators

  5-1. Using the air conditioning system and defogger   Heated steering wheel /seat heaters /seat  ventilators Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively. Seat ventilators maintain good ventilation by pulling air through the seat upholstery. WARNING ■…

• Page 462
  5-1. Using the air conditioning system and defogger Heated steering wheel Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is oper- ating. ■ Operation condition The heated steering wheel can be used when the engine switch is in IGNI- TION ON mode.
• Page 463
  5-1. Using the air conditioning system and defogger Rear seat heaters Without a rear control panel  Turns the heated rear seat on/off The indicator light will illuminate when the rear seat heater is oper- ating. With a rear control panel …
• Page 464
  5-1. Using the air conditioning system and defogger ● Vehicles without a smart entry & start system: The rear seat heaters can be used when the engine switch is in the “ON” position. Vehicles with a smart entry & start system: The rear seat heaters can be used when the engine switch is in IGNITION ON mode.

• Page 465: Using The Interior Lights

  5-2. Using the interior lights Interior lights list Front interior/personal lights (P. 464, 465) Shift lever light (if equipped) Inside door handle lights (if equipped) Rear interior light (if equipped) (P. 464) Rear seat center armrest light (if equipped) (P. 466) Rear personal lights (if equipped) (P.

• Page 466: Interior Lights

  5-2. Using the interior lights Interior lights Front (if equipped) ■ The rear personal lights (if equipped) turn on/off together with the front interior light. Turns the lights on/off linked to door positions Turns the lights on/off Rear (if equipped) ■…

• Page 467: Personal Lights

  5-2. Using the interior lights Personal lights Front ■ Turns the lights on/off Rear (if equipped) ■ Turns the lights on/off CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 468: Rear Seat Center Armrest Light

  5-2. Using the interior lights Rear seat center armrest light (if equipped) Turns the light on/off (when the tail lights are on) ■ Illuminated entry system Vehicles without a smart entry & start system: The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed.

• Page 469: Using The Storage Features

  5-3. Using the storage features List of storage features Auxiliary box (if equipped) Console box (P. 468) (P. 472) Auxiliary box/open tray Glove box (P. 468) (P. 472, 473) Bottle holders/door pockets Coin holder (P. 469) (P. 469) Cup holders (P.

• Page 470: Glove Box

  5-3. Using the storage features Glove box Glove box without a key hole  Pull up the lever to open the glove box. Glove box with a key hole  Unlock with the key (vehicles without a smart entry & start system) or mechanical key (vehicles with a smart entry &…

• Page 471: Coin Holder

  5-3. Using the storage features Coin holder Pull the lever to open. Bottle holders Front Rear   ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders.

• Page 472: Cup Holders

  5-3. Using the storage features Cup holders Front ■ Rear ■ Type A Type B   Pull the armrest down. Pull the armrest down and lift the lid. Type C  Pull the armrest down and press the button. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 473
  5-3. Using the storage features The insert for the rear cup holders can be removed for cleaning. (type B) WARNING ● Do not place anything other than cups or aluminum cans in the cup hold- ers. Other items may be thrown out of the holders in the event of an acci- dent or sudden braking, causing injury.

• Page 474: Auxiliary Boxes

  5-3. Using the storage features Auxiliary boxes Type A (if equipped) Type B   Push the lid. Opening: Push the tray forward until it locks. Closing: Push the tray forward to release the lock and the tray will auto- matically close.

• Page 475: Open Tray

  5-3. Using the storage features NOTICE ■ When opening or closing the tray (type B) ● To prevent damaging small items, when opening the tray while small items are placed on it, make sure the items will not get caught. ●…

• Page 476: Trunk Storage Extension

  5-3. Using the storage features  Trunk storage extension Long objects can be loaded in the vehicle by utilizing the trunk space and rear seat area. Pull down the armrest. Open the armrest door. WARNING When not in use, ensure that the armrest door is closed. In the event of sudden braking, items stored in the trunk may be thrown for- ward into the cabin, resulting in injury.

• Page 477: Trunk Features

  5-3. Using the storage features Trunk features Grocery bag hooks NOTICE To prevent damage to the hooks, do not apply too much load to the hooks. Warning reflector (if equipped) The warning reflector is located in the trunk. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 478: 5-4. Other Interior Features

  5-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Slide the cover to open.

• Page 479: Power Outlet

  5-4. Other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). Open the lid. ■ The power outlet can be used when Vehicles without a smart entry & start system: The engine switch is in the “ACC”…

• Page 480: Usb Charging Ports

  5-4. Other interior features USB charging ports (if equipped) The USB charging ports are used to supply 2.1 A of electricity at 5 V to external devices (power consumption of 10.5 W). The USB charging ports are for charging only. They are not designed for data transfer or other purposes.

• Page 481: Steering Wheel Audio Switches

  5-4. Other interior features NOTICE ■ To prevent damage to the USB charging ports ● Do not insert foreign objects into the ports. ● Do not spill water or other liquids into the ports. ● When the USB charging ports are not in use, close the lids. If a foreign object or liquid enters a port may cause a short circuit.

• Page 482: Wireless Charger

  5-4. Other interior features Wireless charger (if equipped) A portable device, such as a smartphone or mobile battery, can be charged by just placing it on the charging area, provided the device is compatible with the Qi wireless charging standard created by the Wireless Power Consortium.

• Page 483
  5-4. Other interior features Using the wireless charger ■ Press power supply switch of the wireless char- ger. Pressing the switch again turns the wireless charger off. When turned on, the operation indicator light (green) comes on. When the engine switch is turned off, the on/off state of the wireless charger will be memo- rized.
• Page 484
  (orange). Take the appropriate measures according to the table below. Operation indicator light Suspected causes Measure Blinks (orange) at a Vehicle to charger com- Contact your Toyota second interval munication failure. dealer. continuously A foreign object exists between the portable…
• Page 485
  5-4. Other interior features ■ The wireless charger can be operated when The engine switch is in ACCESSORY or IGNITION ON mode. ■ Portable devices that can be charged ● Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger.
• Page 486
  5-4. Other interior features WARNING ■ Caution while driving When charging a portable device while driving, for safety reasons, the driver should not operate the portable device. ■ Caution regarding interference with electronic devices People with implantable cardiac pacemakers, cardiac resynchronization therapy pacemakers or implantable cardioverter defibrillators, as well as any other electrical medical device, should consult their physician about the usage of the wireless charger.
• Page 487
  If in situations other than above the wireless charger does not operate prop- erly or the operation indicator light is blinking, the wireless charger may be malfunctioning. Contact your Toyota dealer. ■ To prevent failure or damage to data ●…

• Page 488: Armrest

  5-4. Other interior features Armrest (if equipped) Fold down the armrest for use. Type A Type B   Type C  NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 489: Rear Sunshade

  5-4. Other interior features Rear sunshade (if equipped) The rear sunshade can be raised and lowered using any of the fol- lowing. Meter control switches  Select (4.2-inch display) or (7-inch display) on the multi- information display using the meter control switches on the steering wheel.

• Page 490
  5-4. Other interior features ● Vehicles without a smart entry & start system: The rear sunshade can be used when the engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system: The rear sunshade can be used when the engine switch is in ACCESSORY or IGNITION ON mode.

• Page 491: Rear Door Sunshades

  5-4. Other interior features Rear door sunshades (if equipped) Pull the tab up and hook the sun- shade on to the anchors. To lower the sunshade, pull the tab up slightly to unhook the shade from the anchors, and lower it slowly.

• Page 492: Assist Grips

  5-4. Other interior features Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat. WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat.

• Page 493
  Maintenance and care 6-1. Maintenance and care Cleaning and protecting the vehicle exterior ..492 Cleaning and protecting the vehicle interior …497 6-2. Maintenance Maintenance requirements….500 Scheduled maintenance ….503 6-3. Do-it-yourself maintenance Do-it-yourself service precautions ……510 Hood ……..513 Positioning a floor jack..514 Engine compartment..515 Tires……..531 Tire inflation pressure ..546…

• Page 494: Maintenance And Care

  6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.

• Page 495: Maintenance And Care

  • Do not use wax or glass cleaners that contain abrasives when cleaning the windows. • Do not use any metallic objects to remove condensation build up. ● When the water-repellent performance has become insufficient, the coating can be repaired. Contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 496
  Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, avoid using the system and consult your Toyota dealer. CAMRY_GE…
• Page 497
  6-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •…
• Page 498
  Shock applied from high pressure water may cause the device to not operate normally. ● Vehicles with Toyota Safety Sense: Do not spray water directly on the radar which is equipped behind the emblem. Otherwise it may cause the device to be damaged.

• Page 499: Cleaning And Protecting The Vehicle Interior

  6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.

• Page 500
  ● Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available.
• Page 501
  Water may also cause the body to rust. ■ When cleaning the inside of the windshield (vehicles with Toyota Safety Sense) Do not allow glass cleaner to contact the lens. Also, do not touch the lens.

• Page 502: Maintenance Requirements

  ● Where to go for maintenance service? It makes good sense to take your vehicle to your local Toyota dealer for maintenance service as well as other inspections and repairs. Toyota technicians are well-trained specialists receiving the latest service information through technical bulletins, service tips and in-dealership train- ing programs.

• Page 503
  ● Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. Your vehicle may need adjustment or repair. CAMRY_GE…
• Page 504
  6-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. ■ Important health and safety information Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.

• Page 505: Scheduled Maintenance

  6-2. Maintenance Scheduled maintenance Perform maintenance by the schedule as follows: Maintenance schedule requirements Your vehicle needs to be serviced according to the normal maintenance schedule. (See “Maintenance schedule”.) If you mainly operate your vehicle under one or more of the spe- cial operating conditions below, some of the maintenance sched- ule items need to be serviced more frequently in order to keep your vehicle in good condition.

• Page 506
  6-2. Maintenance Maintenance schedule Maintenance operations: I = Inspect, correct, clean or replace as necessary R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: MONTHS x1000 km 10 20 30 40 50 60 70 80 (Odometer reading or months, which- x1000 ever comes first.) 6 12 18 24 30 36 42 48…
• Page 507
  6-2. Maintenance Maintenance operations: I = Inspect, correct, clean or replace as necessary R = Replace, change or lubricate SERVICE ODOMETER READING INTERVAL: MONTHS x1000 km 10 20 30 40 50 60 70 80 (Odometer reading or months, which- x1000 ever comes first.) 6 12 18 24 30 36 42 48 miles…
• Page 508
  2GR-FKS engine models for Curacao, Azerbaijan, Bahrain, Saudi Arabia, Kyrgyzstan and Armenia only. M20A-FKS engine models for Kyrgyzstan and Armenia only. 6. Toyota genuine fuel injector cleaner or equivalent. 7. Except for Korea 8. A25A-FKS engine models other than Korea and M20A-FKS engine…
• Page 509
  6-2. Maintenance Additional maintenance schedule Refer to the following table for normal maintenance schedule items requiring more frequent service specific to the type of severe condi- tions. (For outline, see “Maintenance schedule requirements”.) A-1: Operating on rough or muddy roads, or roads with melted snow …
• Page 510
  6-2. Maintenance A-2: Operating on dusty roads (Roads in areas where their pavement rate is low, or a cloud of dust often arises and the air is dry.) Every 5000 km (3000 miles) or 6  Replacement of engine oil months Every 5000 km (3000 miles) or 6 …
• Page 511
  6-2. Maintenance B-2: Repeated short trips of less than 8 km (5 miles) and outside tempera- tures remain below freezing (Engine temperature will not reach to nor- mal temperature) Every 5000 km (3000 miles) or 6  Replacement of engine oil months Every 5000 km (3000 miles) or 6 …

• Page 512: 6-3. Do-It-Yourself Maintenance

  • Grease Battery condition • Conventional wrench (for terminal clamp bolts) (P. 523) • Distilled water • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine coolant life hybrid organic acid technology level (P.

• Page 513
  6-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
• Page 514
  6-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air. ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.

• Page 515: Hood

  6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. ■ Open hood warning buzzer If the vehicle reaches a speed of 5 km/h (3 mph), the master warning light flashes and a buzzer sounds to indicate that the hood is not fully closed.

• Page 516: Positioning A Floor Jack

  6-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.

• Page 517: Engine Compartment

  6-3. Do-it-yourself maintenance Engine compartment A25A-FKS and M20A-FKS engines  Fuse boxes (P. 561) Radiator (P. 522) Engine oil filler cap Electric cooling fan (P. 519) Condenser (P. 522) Engine oil level dipstick Engine coolant reservoir (P. 517) (P. 521) Air cleaner (P.

• Page 518
  6-3. Do-it-yourself maintenance 2GR-FKS engine  Fuse boxes (if equipped) Battery (P. 523) (P. 561) Radiator (P. 522) Engine oil filler cap Electric cooling fan (P. 519) Condenser (P. 522) Engine oil level dipstick Engine coolant reservoir (P. 517) (P. 521) Air cleaner (P.
• Page 519
  6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
• Page 520
  6-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check the oil level. Flat dipstick Twist dipstick   Normal Excessive The shape of the dipstick may differ depending on the type of vehi- cle or engine. Wipe the dipstick and reinsert it fully.
• Page 521
  6-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. A25A-FKS and M20A-FKS 2GR-FKS engine   engines Make sure to check the oil type and prepare the items needed before adding oil.
• Page 522
  Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●…
• Page 523
  If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. CAMRY_GE…
• Page 524
  Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■…
• Page 525
  6-3. Do-it-yourself maintenance Battery Check the battery as follows. Caution symbols ■ The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked Battery acid flames, no sparks Note operating Shield eyes instructions Keep away from chil- Explosive gas…
• Page 526
  6-3. Do-it-yourself maintenance Checking battery fluid ■ Type A  Check that the fluid level is above the “LOWER LEVEL” line. “LOWER LEVEL” line If the fluid level is at or below the “LOWER LEVEL” line, add dis- tilled water. Type B …
• Page 527
  Make sure to turn off the engine before disconnecting the battery. Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. CAMRY_GE…
• Page 528
  6-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●…
• Page 529
  6-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. ■ When adding distilled water Avoid overfilling. Water spilled during battery recharging may cause corro- sion.
• Page 530
  6-3. Do-it-yourself maintenance WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid.
• Page 531
  6-3. Do-it-yourself maintenance Air cleaner filter (A25A-FKS and 2GR-FKS engines) Check the air cleaner filter as follows: Vehicles with 2GR-FKS engine: Disengage each clamp. While pulling the claw, pull the clamp to disengage it. Release the clips. Lift the cover and take out the air cleaner filter.
• Page 532
  6-3. Do-it-yourself maintenance Vehicles with 2GR-FKS engine: Engage each clamp. Make sure to push each clamp until it is securely engaged. WARNING ■ To prevent inhaling dust Wear a respirator when using compressed air to clean the air cleaner filter. NOTICE ■…

• Page 533: Tires

  6-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.

• Page 534
  Front Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 10000 km (6000 miles). Vehicles with a tire pressure warning system: do not fail to initialize the tire pressure warning system after tire rotation.
• Page 535
  6-3. Do-it-yourself maintenance Tire pressure warning system (if equipped) Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valve and transmitters to detect low tire inflation pressure before serious problems arise. Vehicles without a tire inflation pressure display function …
• Page 536
  6-3. Do-it-yourself maintenance ◆ Installing tire pressure warning valve and transmitters When replacing the tires or wheels, the tire pressure warning valve and transmitters must be installed to the wheels which will be installed to the vehicle. When new tire pressure warning valve and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized.
• Page 537
  6-3. Do-it-yourself maintenance Select (4.2-inch display) or (7-inch display) on the multi- information display using the meter control switches on the steer- ing wheel. (P. 139, 154). 4.2-inch display: Select “Vehicle Settings” and then press 7-inch display: Select and then press and hold Select “TPWS”…
• Page 538
  A second set of tire pressure warning system sensor ID codes can be registered at your Toyota dealer. When 2 sets of ID codes have been registered, either ID code set can be selected. Vehicles with a tire inflation pressure display function …
• Page 539
  6-3. Do-it-yourself maintenance Select “Change Wheel” then press and hold until the tire pressure warning light blinks slowly 3 times. Then a message will be dis- played on the multi-information display. When registration is being per- formed, the tire pressure warn- light will blink…
• Page 540
  A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels (vehicles with a tire pressure warning sys-…
• Page 541
  ● In the following situations, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • If a tire has been replaced with a tire that is not an OE (Original Equip- ment) tire.
• Page 542
  6-3. Do-it-yourself maintenance ■ Initialization procedure (vehicles with a tire pressure warning system) ● Make sure to perform the initialization procedure after adjusting the tire infla- tion pressure. Also, make sure the tires are cold before performing the initialization proce- dure or adjusting the tire inflation pressure.
• Page 543
  If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ● If initialization is attempted and the tire pressure warning light does not blink 3 times.
• Page 544
  6-3. Do-it-yourself maintenance ■ When registering ID codes (vehicles with a tire inflation pressure display function) ● Before performing ID code registration, make sure that no wheels with tire pressure warning valve and transmitters installed are near the vehicle. ● Make sure to initialize the tire pressure warning system after registering the ID codes.
• Page 545
  • If, when the vehicle has been driven for about 10 minutes after perform- ing ID code registration, the tire pressure warning light blinks for approxi- mately 1 minute and then illuminates. ● If ID code registration cannot be completed after performing the above pro- cedure, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 546
  Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
• Page 547
  When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.

• Page 548: Tire Inflation Pressure

  Reduced tire life due to wear ● Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●…

• Page 549
  6-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●…

• Page 550: Wheels

  ● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).

• Page 551
  ● Because tire repair or replacement may affect the tire pressure warning valve and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valve and transmitters at your Toyota dealer.

• Page 552: Air Conditioning Filter

  6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method (except for Korea) Turn the engine switch off. Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the upper claws.

• Page 553
  6-3. Do-it-yourself maintenance Remove the filter cover. Unlock the filter cover. Move the filter cover in the direction of the arrow, and then pull it out of the claws. Left-hand drive vehicles Right-hand drive vehicles   CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 554
  6-3. Do-it-yourself maintenance Replace the air conditioning filter. With a filter case  Remove the filter case. There may be foreign objects on top of the air conditioning filter. Remove the air conditioning filter from the filter case and replace it with a new one. The “UP”…
• Page 555
  6-3. Do-it-yourself maintenance Removal method (for Korea) Turn the engine switch off. Open glove remove the glove box cover inside the glove box. Remove the filter cover. Unlock the filter cover. Move the filter cover in the direction of the arrow, and then pull it out of the claws.
• Page 556
  6-3. Do-it-yourself maintenance ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. (P. 504) In dusty areas or areas with heavy traffic flow, early replacement may be required. ■ If air flow from the vents decreases dramatically The filter may be clogged.

• Page 557: Wireless Remote Control/Electronic Key Battery

  6-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2032 Replacing the battery Vehicles without a smart entry & start system …

• Page 558
  6-3. Do-it-yourself maintenance Install the battery cover with the tab facing up. Push the entire edge of the battery cover into the key. Install the key cover. Align the key cover with the key and then press it straight into the key.
• Page 559
  6-3. Do-it-yourself maintenance Vehicles with a smart entry & start system  Release the lock and remove the mechanical key. Remove the key cover. To prevent damage to the key, cover the tip of the flathead screw- driver with a rag. Remove the depleted battery using a small flathead screw- driver.
• Page 560
  Be careful not to lose the battery or any other small parts. ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
• Page 561
  Vehicles with a smart entry & start system: If the cover cannot be firmly closed, stop using the electronic key and stow the key in the place where children cannot reach, and then contact your Toyota dealer. ● If you accidentally swallow a battery or put a battery into a part of your body, get emergency medical attention immediately.
• Page 562
  6-3. Do-it-yourself maintenance NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents: ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other component inside the remote control. ●…

• Page 563: Checking And Replacing Fuses

  6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment (type A) Engine compartment (type B) …

• Page 564
  6-3. Do-it-yourself maintenance Under the passenger’s side instrument panel (right-hand drive vehi-  cles) Remove the lid. Make sure to push the claw when removing/installing the lid. Remove the fuse with the pull- out tool. Only type A fuses can be removed using the pullout tool.
• Page 565
  6-3. Do-it-yourself maintenance Check if the fuse is blown. Type A Type B   Type C  Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 566
  If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 565) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.

• Page 567: Light Bulbs

  Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.

• Page 568
  6-3. Do-it-yourself maintenance Replacing light bulbs Front turn signal lights (bulb type) ■ Turn bulb base counterclockwise. The shape of the bulb base may be different than shown depend- ing on the intended destination of the vehicle. Remove the light bulb. Install a new light bulb and then install the bulb base to the light unit by inserting it…
• Page 569
  6-3. Do-it-yourself maintenance Back-up lights (bulb type) ■ Open trunk remove the clips. Partly remove the trunk lid cover. Turn bulb base counterclockwise. Remove the light bulb. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 570
  6-3. Do-it-yourself maintenance Install a new light bulb and then install the bulb base to the light unit by inserting it and turning it clockwise. Reinstall the trunk lid cover with the clips. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 571
  6-3. Do-it-yourself maintenance Rear turn signal lights (bulb type) ■ Open the trunk and apply protective tape to the vehicle body around the light unit. Use masking tape, etc. Do not use duct tape, as it may leave residue or damage the paint when removed.
• Page 572
  6-3. Do-it-yourself maintenance Remove the light unit. Attach a long piece of packing tape to the light unit and fold the excess in half. Hold the folded portion and pull it toward the rear of the vehicle to remove the light unit. Turn bulb base…
• Page 573
  6-3. Do-it-yourself maintenance Install a new light bulb and then install the bulb base to the light unit by inserting it and turning it clockwise. Install the light unit. Align the tabs and push the light unit toward the front of the vehi- cle to install it.
• Page 574
  Remove the protective tape. Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlights ● Daytime running lights/front position lights ● Front turn signal lights (LED type) ●…
• Page 575
  The lights other than the front turn signal lights (bulb type), back-up lights (bulb type) and rear turn signal lights (bulb type) consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
• Page 576
  6-3. Do-it-yourself maintenance CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 577
  When trouble arises 7-1. Essential information 7-2. Steps to take in an emergency Emergency flashers …576 If your vehicle needs If your vehicle has to be towed ……580 to be stopped in an emergency….577 If you think something is wrong ……586 If the vehicle is submerged or water Fuel pump shut off…

• Page 578: 7-1. Essential Information

  7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped on the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.

• Page 579: If Your Vehicle Has To Be Stopped In An Emergency

  7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.

• Page 580
  7-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.

• Page 581: If The Vehicle Is Submerged Or Water On The Road Is Rising

  Laminated glass is used in the windshield on this vehicle. Laminated glass cannot be shattered with an emergency hammer . Tempered glass is used in the windows on this vehicle. : Contact your Toyota dealer or aftermarket accessory manufacturer for fur- ther information about an emergency hammer. WARNING ■…

• Page 582: If Your Vehicle Needs

  If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.

• Page 583
  Situations when it is necessary to contact dealers before towing The following may indicate a problem with your transmission. Contact your Toyota dealer or commercial towing service before towing. ● The engine is running but the vehicle does not move.
• Page 584
  7-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front From the rear   Release the parking brake. Use a towing dolly under the front wheels. Turn automatic mode off. (P. 273) NOTICE ■…
• Page 585
  7-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Covers are installed to the tie-down holes. After transporting the vehi- cle, make sure to reinstall the cov- ers to the holes.
• Page 586
  7-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph).
• Page 587
  7-2. Steps to take in an emergency Tighten down the towing eyelet securely using a wheel nut wrench or hard metal bar. Securely attach cables or chains to the towing eyelet. Take care not to damage the vehicle body. Vehicles without a smart entry & start system: Enter the vehicle being towed and start the engine.

• Page 588: If You Think Something Is Wrong

  7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.

• Page 589: Fuel Pump Shut Off System

  7-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.

• Page 590: If A Warning Light Turns On Or A Warning Buzzer Sounds

  • The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- (Red) tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. Brake system warning light Indicates a malfunction in the electric parking brake …

• Page 591
  Warning light/Details/Actions ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system  Have the vehicle inspected by your Toyota dealer immediately. Inappropriate pedal operation warning light (warning buzzer) When a buzzer sounds: Indicates a malfunction in: •…
• Page 592
  PCS warning light When a buzzer sounds simultaneously: Indicates a malfunction has occurred in the PCS (Pre-Col- lision System).  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: The PCS (Pre-Collision System) has become temporarily unavailable, corrective action may be necessary.
• Page 593
  Warning light/Details/Actions RCD OFF indicator When a buzzer sounds: Indicates a malfunction in the RCD (Rear Camera Detec- tion) function  Have the vehicle inspected by your Toyota dealer immediately. (If equipped) When a buzzer does not sound: (Flashes) Indicates that the function temporarily cannot be used due to the camera being dirty, etc.
• Page 594
  7-2. Steps to take in an emergency Warning light Warning light/Details/Actions Tire pressure warning light Indicates the following: • Low tire pressure due to flat tire; • Low tire pressure due to natural causes; or • The tire pressure warning system is malfunctioning (If equipped) …
• Page 595
  Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■…
• Page 596
  (P. 534) If the warning light does not turn off several minutes after the initialization has been performed, have the vehicle inspected by your Toyota dealer immedi- ately. If the tire pressure warning light blinks for 1 minute then stays on …
• Page 597
  Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer.
• Page 598
  7-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly (vehi- cles with a tire pressure warning system) Do not install tires with different specifications or makers, as the tire pres- sure warning system may not operate properly. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 599: If A Warning Message Is Displayed

  Multi-information display Handling method Follow the instructions of the message on the multi-information display. If any of the warning messages are shown again after the appropriate actions have been performed, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 600
  Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System…
• Page 601
  ● If the following messages are shown, there may be a malfunction. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. • “Low Braking Power Stop in a Safe Place See Owner’s Manual”…
• Page 602
  If this message is displayed but you have not had a new electronic key regis- tered, ask your Toyota dealer to check if an unknown electronic key (other than those in your possession) has been registered.
• Page 603
  There is a possible malfunction relating to the charging system or the bat- tery may be deteriorating. Have the vehicle inspected by your Toyota dealer. Vehicles with a Heated Windshield Defroster: This message will be dis- played when the Heated Windshield Defroster is operating. This is not a malfunction.

• Page 604: If You Have A Flat Tire (Vehicles With An Emergency Tire Puncture Repair Kit)

  (P. 603) After temporarily repairing the tire with the kit, have the tire repaired or replaced by your Toyota dealer. Repairs conducted using the emergency tire puncture repair kit are only a tempo- rary measure. Have the tire repaired and replaced as soon as possible.

• Page 605
  A flat tire that cannot be repaired with the emergency tire puncture repair In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit. Contact your Toyota dealer. ● When the tire is damaged due to driving without sufficient air pressure ●…
• Page 606
  7-2. Steps to take in an emergency Location of the emergency tire puncture repair kit, jack and tools Luggage floor cover Jack Emergency tire puncture repair Wheel nut wrench kit (Bottle) Jack handle Emergency tire puncture repair Towing eyelet kit (Compressor) : Use of the jack (P.
• Page 607
  7-2. Steps to take in an emergency Emergency tire puncture repair kit components Bottle ■ Sticker Compressor ■ Air pressure gauge Compressor switch Power plug Hose Air release cap CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 608
  7-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit Lift up the hook of the luggage floor cover on the trunk floor. Secure the luggage floor cover using the hook provided. Remove the emergency tire puncture repair kit.
• Page 609
  7-2. Steps to take in an emergency Emergency repair method Remove the emergency tire puncture repair kit from the plastic bag. A sticker is included in the plastic bag. Attach the sticker as shown in step Remove the hose and power plug from the compressor.
• Page 610
  7-2. Steps to take in an emergency Connect the hose to the bottle. Make sure that the hose is securely connected to the bottle as shown in the illustration. Remove the valve cap from the valve of the punctured tire. Extend the hose.
• Page 611
  7-2. Steps to take in an emergency Connect the hose to the valve. Screw the end of hose clockwise as far as possible. Make sure that the compressor switch is off. Connect the power plug to the power outlet socket. (P. 477) Attach the sticker as shown.
• Page 612
  7-2. Steps to take in an emergency Check the specified tire inflation pressure. Tire inflation pressure is specified on the label as shown. (P. 668) Left-hand drive vehicles Right-hand drive vehicles   Start the engine. (P. 254, 256) To inject the sealant and inflate the tire, turn the compressor switch on.
• Page 613
  25 minutes with the switch on, the tire is too damaged to be repaired. Turn the compressor switch off and contact your Toyota dealer. • If the tire inflation pressure exceeds the recommended level, let out some air to adjust the tire inflation pressure. (P. 615)
• Page 614
  7-2. Steps to take in an emergency With the compressor switch off, disconnect the hose from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. Install the valve cap onto the valve of the emergency repaired tire.
• Page 615
  130 kPa (1.3 kgf/cm or bar, 19 psi): The puncture cannot be repaired. Contact your Toyota dealer. If the tire inflation pressure is between 130 kPa (1.3 kgf/cm bar, 19 psi) and a point below the recommended level: The tire can be repaired.
• Page 616
  Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h (50 mph) to your Toyota dealer that is less than 100 km (62 miles) away for tire repair or replacement. Make sure to tell your Toyota dealer when you have them repair or replace the tire that sealant is injected.
• Page 617
  Do not use sealant whose expiry date has already passed. Otherwise, repairs conducted using the emergency tire puncture repair kit may not be performed properly. ● The sealant should be replaced before the expiry date. Contact your Toyota dealer for replacement. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 618
  7-2. Steps to take in an emergency WARNING ■ Caution while driving Observe the following precautions. Failure to do so may cause an accident. ● Store the emergency tire puncture repair kit in the luggage compartment. Injuries may result in the event of an accident or sudden braking. ●…
• Page 619
  7-2. Steps to take in an emergency WARNING ■ When fixing the flat tire ● Stop your vehicle in a safe and flat area. ● Do not touch the wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven, the wheels and the area around the brakes may be extremely hot.
• Page 620
  7-2. Steps to take in an emergency WARNING ■ Driving to spread the liquid sealant evenly Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury.
• Page 621
  When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. After use of liquid sealant, make sure to replace the tire pressure warning valve and transmitter when repairing or replacing the tire.

• Page 622: If You Have A Flat Tire (Vehicles With A Spare Tire)

  7-2. Steps to take in an emergency If you have a flat tire (vehicles with a spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 531 WARNING ■…

• Page 623
  7-2. Steps to take in an emergency Location of the spare tire, jack and tools Vehicles with a compact spare tire  Tools (if equipped) Wheel block (if equipped) Screwdriver (if equipped) Luggage floor cover Jack handle Jack Wheel nut wrench Spare tire Towing eyelet CAMRY_GE…
• Page 624
  7-2. Steps to take in an emergency Vehicles with a full-size spare tire  Towing eyelet Wheel block (if equipped) Screwdriver (if equipped) Luggage floor cover Jack Jack handle Spare tire cover Wheel nut wrench Tools (if equipped) Spare tire CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 625
  7-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
• Page 626
  7-2. Steps to take in an emergency Taking out the jack Lift up the hook of the luggage floor cover on the trunk floor. Secure the luggage floor cover using the hook provided. Remove the jack. Vehicles with a compact spare Vehicles with a full-size spare …
• Page 627
  7-2. Steps to take in an emergency Taking out the spare tire Lift up the hook of the luggage floor cover on the trunk floor. Secure the luggage floor cover using the hook provided. Remove the tool tray. Vehicles with a compact spare Vehicles with a full-size spare …
• Page 628
  7-2. Steps to take in an emergency Vehicles with a full-size spare tire only: Remove the spare tire cover. Loosen the center fastener that secures the spare tire. When taking out or stowing the spare tire, make sure to firmly hold opposite end of the tire.
• Page 629
  7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire…
• Page 630
  7-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. To prevent damage to the vehicle when using the jack, position the jack in the correct location.
• Page 631
  • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
• Page 632
  7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
• Page 633
  7-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N•m (10.5 kgf•m,76 ft•lbf) Vehicles with a steel wheel: When reinstalling an original wheel or installing a full-size spare tire, reinstall the wheel ornament.
• Page 634
  7-2. Steps to take in an emergency ■ The compact spare tire (if equipped) ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. ●…
• Page 635
  • VSC • Tire pressure warning system • TRC • Toyota parking assist-sensor • EPS • Toyota parking assist monitor • AHB (Automatic High Beam) • PKSB (Parking Support Brake) • Dynamic radar cruise control with • BSM (Blind Spot Monitor) full-speed range •…
• Page 636
  When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.

• Page 637: If The Engine Will Not Start

  7-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (P. 254, 256), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.

• Page 638
  ● There may be a malfunction in the steering lock system (vehicles with a smart entry & start system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart entry & start…

• Page 639: If The Electronic Key Does Not Operate Properly

  For Korea: Turning the key rearward unlocks the driver’s door. Turning the key once again unlocks the other doors. Opens the windows and the moon roof or panoramic moon roof (turn and hold) : If equipped : This setting must be customized at your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 640
  ACCESSORY mode. Firmly depress the brake pedal and check that is displayed on the multi-information display. Press the engine switch shortly and firmly. In the event that the engine still cannot be started, contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 641
  7-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.

• Page 642: If The Vehicle Battery Is Discharged

  The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.

• Page 643
  7-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: A25A-FKS and M20A-FKS engines  2GR-FKS engine  Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
• Page 644
  Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
• Page 645
  • If the 20 hour rate capacity is low, even if the time period where the vehi- cle is not used is a short time, the battery may discharge and the engine may not be able to start. ● For details, consult your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 646
  7-2. Steps to take in an emergency WARNING ■ When removing the battery terminals Always remove the negative (-) terminal first. If the positive (+) terminal con- tacts any metal in the surrounding area when the positive (+) terminal is removed, a spark may occur, leading to a fire in addition to electrical shocks and death or serious injury.
• Page 647
  7-2. Steps to take in an emergency WARNING ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following pre- cautions when handling the battery: ● When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body.

• Page 648: If Your Vehicle Overheats

  If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 649
  7-2. Steps to take in an emergency The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir. Reservoir “F” line “L” line Radiator cap Except 2GR-FKS engine 2GR-FKS engine   Add coolant if necessary. Water can be used in an emergency if coolant is unavailable.
• Page 650
  (The fan may not operate in freezing tem- peratures.) If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.

• Page 651: If The Vehicle Becomes Stuck

  7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow or sand from around the front wheels.

• Page 652
  7-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the front wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
• Page 653
  Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)…652 Fuel information ….671 8-2. Customization Customizable features ..672 8-3. Items to initialize Items to initialize ….682 CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 654: 8-1. Specifications

  8-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions 4885 mm (19.23 in.) Overall length 4905 mm (193.1 in.) 4880 mm (192.1 in.) Overall width 1840 mm (72.4 in.) 1445 mm (56.8 in.) Overall height 1455 mm (57.3 in.) Wheelbase 2825 mm (111.2 in.) 1600 mm (63.0 in.) 16-inch tires…

• Page 655
  8-1. Specifications : Unladen vehicles : AXVA70L-AEZDBV, AXVA70L-AEZNBV, GSV70L-AEZGBV, AXVA70L- AEZNBW (except for Korea), GSV70L-AEZGBW, AXVA70R-AEZNBW, MXVA71L-AEXDBR, MXVA71L-REXNBX, AXVA70L-REZNBX GSV70LREZGBX models : AXVA70L-AEZSBV and GSV70L-AEZSBV models : AXVA70L-AEZNBW (for Korea) models : AXVA70L-AEZDBV (except for Yemen), AXVA70L-AEZNBV (except for Yemen and Vanuatu), AXVA70L-AEZSBV, GSV70L-AEZGBV, GSV70L- AEZSBV, AXVA70L-AEZNBW (for Korea) and MXVA71L-AEXDBR mod- : AXVA70L-AEZDBV (for Yemen), AXVA70L-AEZNBV (for Yemen and Van- uatu), AXVA70L-AEZNBW…
• Page 656
  The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. On some models, this number is stamped on the top left of the instrument panel.
• Page 657
  8-1. Specifications Year of manufacture and country of origin (GCC countries ■ Yemen, Iraq, Jordan and Lebanon) The year of the manufacture and country of origin are shown on the Certification Regulation label. : Saudi Arabia, Oman, Bahrain, United Arab Emirates, Qatar and Kuwait Engine number ■…
• Page 658
  8-1. Specifications Engine A25A-FKS engine  Model A25A-FKS Type 4-cylinder in line, 4-cycle, gasoline 87.5 103.4 mm (3.44  4.07 in.) Bore and stroke Displacement 2487 cm (151.8 cu. in.) Valve clearance Automatic adjustment Drive belt tension Automatic adjustment Maximum vehicle speed 210 km/h (130 mph) Maximum torque (NET) 243 N•m @ 5000 rpm…
• Page 659
  8-1. Specifications 2GR-FKS engine  Model 2GR-FKS Type 6-cylinder V type, 4-cycle, gasoline 94.0 83.0 mm (3.70 3.27 in.) Bore and stroke Displacement 3456 cm (210.9 cu. in.) Valve clearance Automatic adjustment Drive belt tension Automatic adjustment Maximum vehicle speed 220 km/h (137.5 mph) Maximum torque (NET) 356 N•m @ 4700 rpm…
• Page 660
  8-1. Specifications Fuel Fuel type Unleaded gasoline only Research octane 91 (octane rating 87) or higher number A25A-FKS (except for Korea), M20A-FKS and  2GR-FKS engine Fuel tank capacity 60 L (15.9 gal., 13.2 Imp. gal.) (Reference) A25A-FKS (for Korea) engine …
• Page 661
  8-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: 0W-16: API grade SN “Resource-Conserving”, SN PLUS “Resource- Conserving”…
• Page 662
  8-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SP” means quality designation American Petroleum Institute (API).
• Page 663
  8-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN “Resource-Conserving”, SN PLUS “Resource-Conserving”…
• Page 664
  8-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SP” means the oil quality designa- tion by American Petroleum Institute (API).
• Page 665
  (Reference) 9.4 L (9.9 qt., 8.3 Imp. qt.) 8.6 L (9.1 qt., 7.6 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-sili- Coolant type cate, non-amine, non-nitrite, and non-borate cool- ant with long-life hybrid organic acid technology Do not use plain water alone.
• Page 666
  8-1. Specifications Ignition system Spark plug A25A-FKS engine  Make DENSO FC16HR-Q8 M20A-FKS engine  DENSO FC20HR-Q8 2GR-FKS engine  DENSO FK20HBR8 A25A-FKS and 2GR-FKS engine  0.8 mm (0.031 in.) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust spark plug gap. CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 667
  7.5 L (7.9 qt., 6.6 Imp. qt.) Fluid type Toyota Genuine ATF WS : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than the above type may cause abnormal noise or vibration, or damage the transmission of your vehicle.
• Page 668
  8.54 L Fluid type Toyota Genuine CVTF FE : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE ■ Continuously variable transmission fluid type Using CVT (Continuously Variable Transaxle) fluid other than the above type may cause abnormal noise or vibration, or damage the CVT (Continu- ously Variable Transaxle) of your vehicle.
• Page 669
  8-1. Specifications Steering Free play Less than 30 mm (1.2 in.) Tires and wheels (for Korea) 17-inch tires  Tire manufacturer Bridgestone Michelin Tire rolling resistance rating (5 levels) Tire wet grip rating (5 levels) Tire size 215/55R17 94V Tire inflation pressure (Recommended cold tire…
• Page 670
  8-1. Specifications Compact spare tire  Tire size T155/70D17 110M Spare tire inflation pressure (Recommended cold tire 420 kPa (4.2 kgf/cm or bar, 60 psi) inflation pressure) 17  4 T Wheel size Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf) Tires and wheels (except for Korea) 16-inch tires …
• Page 671
  8-1. Specifications 18-inch tires  Tire size 235/45R18 94W kPa (kgf/cm or bar, Vehicle speed Tire inflation pres- psi) sure (Recommended More than 190 km/h (118 270 (2.7, 39) cold tire inflation mph) pressure) 190 km/h (118 mph) or less 240 (2.4, 35) 18 …
• Page 672
  8-1. Specifications Light bulbs Light bulbs Type Front turn signal lights (bulb type) Exterior Rear turn signal lights (bulb type) Back-up lights (bulb type) Rear interior light Interior Door courtesy lights Trunk light A: Wedge base bulbs (amber) B: Wedge base bulbs (clear) C: Double end bulbs : Light bulbs not listed in this table are LED bulbs.

• Page 673: Fuel Information

  ■ Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.

• Page 674: 8-2. Customization

  The settings of these fea- tures can be changed using the multi-information display, on the audio system screen, or at your Toyota dealer. Customizing vehicle features When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P and the parking brake set.

• Page 675
  8-2. Customization Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed on the audio system screen (vehicles with a navigation/multimedia system) Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —…
• Page 676
  8-2. Customization Door lock (P. 185195, 637) ■ Function Default setting Customized setting Driver’s door All doors Unlocking using unlocked in one step, unlocked in one — O all doors unlocked in step two steps Speed linked door lock- ing function Shift position linked door locking function Shift position linked door…
• Page 677
  8-2. Customization Smart entry & start system and wireless remote control ■ (P. 185, 195, 200) Function Default setting Customized setting Operation buzzer vol- Off to 7 Operation signal (Emergency flashers) Time elapsed before 60 seconds automatic door lock function is activated if 30 seconds door is not opened after 120 seconds…
• Page 678
  8-2. Customization Smart entry & start system (P. 185, 195, 200) ■ Function Default setting Customized setting Smart entry & start sys- — O 1, 2 Smart door unlocking All the doors Driver’s door Time elapsed before unlocking all the door when gripping and hold- 2 seconds —…
• Page 679
  8-2. Customization Power windows, and moon roof or panoramic moon roof ■ (P. 227, 232, 236) Function Default setting Customized setting Key linked operation — O Wireless remote control — O linked operation Wireless remote control linked operation signal — O (buzzer) : If equipped : Except for Korea…
• Page 680
  8-2. Customization Steering wheel (P. 219) ■ Function Default setting Customized setting Telescopic only Auto tilt away function Tilt only Tilt & telescopic : Vehicles with power adjustment steering wheel Outside rear view mirrors (P. 223) ■ Function Default setting Customized setting Automatic mirror folding Linked to the…
• Page 681
  8-2. Customization Toyota parking assist-sensor (P. 388) ■ Function Default setting Customized setting Buzzer volume 1 to 3 — O : If equipped BSM (Blind Spot Monitor) (P. 376) ■ Function Default setting Customized setting Outside rear view mirror Bright —…
• Page 682
  8-2. Customization Illumination (P. 463) ■ Function Default setting Customized setting Time elapsed before 15 seconds 7.5 seconds lights turn off 30 seconds Vehicles without smart entry & start system: Operation after engine switch turned to the “LOCK” position — O Vehicles with smart entry &…
• Page 683
  8-2. Customization WARNING ■ During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.

• Page 684: 8-3. Items To Initialize

  8-3. Items to initialize Items to initialize The following item must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference • When the tire inflation pres- sure is changed such as when changing traveling speed or load weight…

• Page 685: Index

  For vehicles with a multimedia system or navigation system, refer to the “Navigation and Multimedia System Owner’s Manual” for information regarding the equipment listed below. • Navigation system • Audio/visual system • Rear view monitor system • Toyota parking assist monitor • Panoramic view monitor CAMRY_GE CAMRY_OM_General_OM33F01E…

• Page 686: What To Do If

  You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 181) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.

• Page 687
  What to do if… (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart entry & start system) ● Is the shift lever in P? (P. 258) ● Is the steering wheel unlocked? (P. 254) ●…
• Page 688
  What to do if… (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart entry & start system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch.
• Page 689
  What to do if… (Troubleshooting) An alarm is activated and the horn sounds (vehicles with an alarm) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (P. 117) Do one of the following to stop the alarm: Vehicles without a smart entry &…
• Page 690
  What to do if… (Troubleshooting) When a problem has occurred If you have a flat tire ● Vehicles with an emergency tire puncture repair kit: Stop the vehicle in a safe place and repair the flat tire temporarily with the emergency tire punc- ture repair kit.

• Page 691: Alphabetical Index

  Alphabetical index Alphabetical index Airbags ……..43 Airbag operating conditions ..53 A/C……..442, 447 Airbag precautions for Air conditioning filter….550 your child ……47 Automatic air Correct driving posture … 36 conditioning system …. 447 Curtain shield airbag Manual air conditioning operating conditions …..

• Page 692
  Alphabetical index Alarm……… 117 Antennas Back-up lights (smart entry & start Replacing light bulb ..567, 572 system)……..200 Wattage …….. 670 Anti-lock Brake System Battery ……..523 (ABS) ……..368 Battery checking ….523 Warning light ……589 If the battery is discharged..640 Approach warning ….
• Page 693
  Alphabetical index Child safety …….. 64 Airbag precautions….47 Care Battery precautions..526, 645 Exterior……..492 Child restraint system ….. 64 Interior……..497 Electronic sunshade Seat belts ……498 precautions……240 Wheels and wheel How your child should wear ornaments……493 the seat belt……
• Page 694
  Alphabetical index Clock ……… 134, 147 Coat hooks ……. 490 Daytime running light Condenser …….. 522 system……..281 Console box ……468 Defogger Consumption Outside rear view screen….. 137, 151, 173 mirrors …….. 451 Continuously variable Rear window ….444, 451 transmission (CVT) ….
• Page 695
  Alphabetical index Doors ……..185 Automatic door locking Eco drive mode……432 and unlocking systems ..190 Eco Driving Indicator ..145, 163 Door lock……. 189 Eco-friendly driving Outside rear view mirrors..223 information ……151 Rear door child-protector ..190 Eco-friendly driving tips ..
• Page 696
  Alphabetical index Emergency, in case of Engine If a warning buzzer ACCESSORY mode ….. 257 sounds …….. 588 Compartment ……515 If a warning light turns on..588 Engine switch….254, 256 If a warning message is Hood ……..513 displayed ……
• Page 697
  Alphabetical index Front turn signal lights Replacing light bulbs..566, 572 Flat tire……602, 620 Turn signal lever ….272 Floor mats ……..34 Wattage …….. 670 Fluid Fuel Automatic transaxle ….665 Capacity…….. 658 Brake……..666 Fuel gauge……130 Washer……..527 Fuel pump shut off system..
• Page 698
  Alphabetical index Heaters Automatic air Gauges……..130 conditioning system…. 447 Glove box ……… 468 Heated steering wheel ..460 Grocery bag hooks ….475 Manual air conditioning system …….. 442 Outside rear view mirrors..451 Hands-free system Seat heaters ….460, 461 (for cellular phone) Seat ventilators …..
• Page 699
  Alphabetical index Identification Jack Engine……..655 Positioning a floor jack..514 Vehicle ……..654 Vehicle-equipped jack… 621 Ignition switch Jack handle ……621 (engine switch) ….254, 256 Jam protection function Illuminated entry system..466 Electronic sunshade ….. 238 Immobilizer system ….115 Moon roof……
• Page 700
  Alphabetical index Lane Tracing Assist (LTA) ..325 Maintenance Language (multi- Do-it-yourself maintenance… 510 information display) ..142, 161 Maintenance data ….652 Lever Maintenance Auxiliary catch lever ….513 requirements …… 500 Hood lock release lever ..513 Scheduled maintenance ..503 Shift lever ……
• Page 701
  Alphabetical index Moon roof ……… 232 Door lock linked moon roof Navigation system operation……233 Noise from under vehicle…. 8 Jam protection function..233 Operation ……232 Multi-information Odometer……143, 162 display ……134, 147 Drive information….137 Engine oil ……658 Dynamic radar Opener cruise control with…
• Page 702
  Alphabetical index PKSB (Parking Support Brake) ……..409 Paddle shift switches ..267, 268 Indicator …….. 127 Panic mode……. 181 Warning light……590 Panoramic moon roof….236 Warning messages ….414 Jam protection function..238 Power outlet ……477 Operation ……236 Power steering Panoramic view monitor (Electric power steering…
• Page 703
  Alphabetical index Rear turn signal lights….. 272 Replacing light bulbs..569, 572 Radar cruise control Turn signal lever ….272 (dynamic radar cruise Wattage …….. 670 control with full-speed Rear view mirror range) ……..346 Inside rear view mirror ..221 Radiator ……..
• Page 704
  Rain-sensing windshield SRS warning light ….588 wipers ……… 293 Seat ventilators ……462 RSA (Road Sign Assist)..340 Seats ……… 207, 209 Toyota parking Adjustment …. 207, 209, 210 assist-sensor …… 388 Adjustment precautions ….208, 211 Child seats/child restraint system installation ….
• Page 705
  Alphabetical index Shift lever ……261, 266 Spark plug …….. 664 Automatic transmission..266 Specifications ……652 CVT (Continuously variable Speedometer……130 transmission) …… 261 Sport mode……. 432 If the shift lever cannot Steering lock be shifted from P ..264, 270 Column lock release ..
• Page 706
  Alphabetical index Switches “ODO/TRIP” switch ..135, 149 Audio remote control Outside rear view mirror switches switches……223 Automatic High Beam Paddle shift switches ..267, 268 switch……..284 Panoramic moon roof Brake hold switch….277 switches……236 Camera switch Parking brake switch…..
• Page 707
  Alphabetical index Tires ………. 531 Chains……..435 Tachometer ……130 Checking……. 531 Tail lights Emergency tire puncture Light switch ……279 repair kit……602 Replacing light bulbs….. 572 If you have a flat tire ..602, 620 Talk switch Inflation pressure ..667, 668 Telephone switch Replacing……
• Page 708
  Trip information ……. 173 Toyota parking Trip meters ……. 143, 162 assist-sensor ……388 Trunk……… 195 Toyota Safety Sense….301 Grocery bag hooks ….475 Automatic High Beam … 284 Smart entry & start Dynamic radar system …….. 195 cruise control with Trunk light ……
• Page 709
  Alphabetical index USB charging ports ….478 Warning buzzers USB memory Approach warning….355 USB port Downshifting ……269 Electric power steering system …….. 589 Key reminder ……255 Vanity lights ……476 Lane departure alert Wattage……… 670 function……. 330 Vanity mirrors ……
• Page 710
  Alphabetical index Warning lights……125 Window glasses ABS……..589 Front side windows ….493 Brake hold operated Power windows….. 227 indicator ……589 Window lock switch ….227 Brake system ……588 Windows……..227 Electric power steering..589 Power windows….. 227 LTA indicator……
• Page 711
  Certifications Immobilizer system  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 712
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 713
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 714
  Wireless remote control  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 715
  Smart entry & start system  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 716
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 717
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 718
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 719
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 720
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 721
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 722
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 723
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 724
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 725
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 726
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 727
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 728
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 729
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 730
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 731
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 732
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 733
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 734
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 735
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 736
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 737
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 738
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 739
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 740
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 741
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 742
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 743
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 744
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 745
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 746
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 747
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 748
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 749
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 750
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 751
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 752
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 753
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 754
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 755
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 756
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 757
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 758
  Toyota Safety Sense  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 759
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 760
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 761
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 762
  Blind Spot Monitor  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 763
  Wireless charger  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 764
  Tire pressure warning system  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 765
  CAMRY_GE CAMRY_OM_General_OM33F01E…
• Page 766
  60.6 L (16.0 gal., 13.3 Imp. gal.) Fuel type P. 658, 671 Cold tire inflation P. 667, 668 pressure Engine oil capacity (Drain and refill — P. 658 reference) “Toyota Genuine Motor Oil” or equivalent Engine oil type P. 658 CAMRY_GE CAMRY_OM_General_OM33F01E…

инструкцияToyota Camry (2021)

CAMRY_U

Pictorial index

Search by illustration

1

For safety

and security

Make sure to read through them

2

Instrument

cluster

How to read the gauges and meters, the variety of

warning lights and indicators, etc.

3

Operation of

each

component

Opening and closing the doors and windows,

adjustment before driving, etc.

4

Driving

Operations and advice which are necessary for

driving

5

Interior features

Usage of the interior features, etc.

6

Maintenance

and care

Caring for your vehicle and maintenance

procedures

7

When trouble

arises

What to do in case of malfunction or emergency

8

Vehicle

specifications

Vehicle specifications, customizable features, etc.

9

For owners

Reporting safety defects for U.S. owners, and seat

belt and SRS airbag instructions for Canadian

owners

Index

Search by symptom

Search alphabetically

Посмотреть инструкция для Toyota Camry (2021) бесплатно. Руководство относится к категории автомобили, 4 человек(а) дали ему среднюю оценку 8.6. Руководство доступно на следующих языках: английский. У вас есть вопрос о Toyota Camry (2021) или вам нужна помощь? Задайте свой вопрос здесь

• Toyota 2021 Camry Owner’s Manual (OM06242U)

Главная

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Toyota Camry (2021).

Не нашли свой вопрос? Задайте свой вопрос здесь