Traktor pro 3 инструкция на русском языке

Disclaimer

1. DISCLAIMER

The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this document is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native Instruments.

“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instruments GmbH.

Mac, macOS, GarageBand, Logic and iTunes are registered trademarks of Apple Inc., registered in the U.S. and other countries.

Windows and DirectSound are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Ableton Live™ and LINK™ are a trademarks of Ableton AG.

All other trademarks are the property of their respective owners and use of them does not imply any affiliation with or endorsement by them.

Document authored by: Christian Schulz

Software version: 3.0 (10/2018)

Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product.

Welcome to TRAKTOR

2. WELCOME TO TRAKTOR

Thank you for choosing TRAKTOR PRO 3 — it is because of customers like you that we can continue developing groundbreaking music software and hardware. TRAKTOR is the most powerful and versatile DJ software on the market. With TRAKTOR, you can mix your tracks traditionally as well as combine your tracks and loops in a non-linear way using it as a powerful live remixing tool. This documentation provides you with all the information you need to make use of TRAKTOR’s features to their full capacity.

2.1. Document Conventions

This document uses particular formatting to point out special facts and to warn you of potential issues. The icons introducing the following notes let you see what kind of information can be expected:

The speech bubble icon indicates a useful tip that may help you to solve a task more efficiently.

The exclamation mark icon highlights important information that is essential for the given context.

The warning icon warns you of serious issues and potential risks that require your full attention.

Furthermore, the following formatting is used:

•Paths to locations on your hard disk or other storage devices are printed in italics.

•Important names and concepts are printed in bold.

•Square brackets are used to reference keys on a computer’s keyboard, e.g., Press [Shift] + [Enter].

New in TRAKTOR PRO 3

3. NEW IN TRAKTOR PRO 3

TRAKTOR PRO 3 preserves most of the workflows of TRAKTOR PRO 3. It will install alongside TRAKTOR PRO 2 and offer you to copy your collection.

All controllers and setups supported with TRAKTOR PRO 2 remain supported with TRAKTOR PRO 3.

With the release of TRAKTOR PRO 3 you get plenty of new features and improvements, including:

Fully Overhauled User Interface

We have overhauled TRAKTOR’s user interface for extra clarity by flattening and sharpening it. Now you can see everything you need at a glance, also in challenging environments. New Master and Channel level metering means you can accurately control your mix with full visual feedback.

Improved information hierarchy, consistency in design and colours throughout all panels of the application, drop-down menus, dialogs, full width Hotcue buttons.

New Mixer Effects

Whether it’s heavy drops or smooth transitions that define your style, the new Mixer FX are designed for one-knob modulation with big-sounding results. Choose from eight extra effects and three new filters to assign to each channel, in addition to TRAKTOR’s famous Deck FX.

Traktor Pro 3 introduces the concept of easy to use, one-knob Mixer Effects located in the mixer channels. The new type of effects will be launched with a selection of eight standard effects: Reverb, Dual Delay, Dotted Delay, Flanger, Time Gater, Noise, Crush and Barber Pole.

Scratch right out of the box

TRAKTOR SCRATCH is now included in TRAKTOR PRO 3, right out of the box.

Use any soundcard

DJs using timecode vinyl can now use any soundcard they like, in addition to tried and tested, TRAKTOR SCRATCH Certified soundcards and mixers. So if there’s a model that does it for you, or if you’re playing back-to-back with somebody on a different setup, TRAKTOR can adapt.

Additional master limiter

Alternative, additional Master Limiter provides a more transparent sound.

The TRAKTOR Workflow

4. THE TRAKTOR WORKFLOW

The following steps outline the key workflow of using TRAKTOR. Each milestone step is briefly introduced and provides links with further information:

1.Importing Your Music: At first, you need to import your music into TRAKTOR. When you import your music, all music files get stored in the Track Collection. The Track Collection uses the track-specific metadata for categorizing the tracks by certain criteria. For more information, refer to Importing Music to the Track Collection.

2.Browsing for Music: Once your music imported in TRAKTOR, you can use the Browser to find the tracks you are looking for your mix. The Browser lets you search for your music by either performing a text search or by navigating the Browser Tree. The Track List shows the tracks of the selected folder with its metadata sorted inside a table. For more information, refer to Browsing for Music.

3.Loading Tracks into Decks: When loading a track from the Track List, TRAKTOR calculates its exact tempo and key the information. This analysis of each track can be done also before loading tracks. While analyzing, TRAKTOR creates the Beatgrid and the Waveform for each imported track. This information is then stored for each track in the Track Collection. For more information, refer to Loading Music into Decks.

4.Start Playback of a Deck: In order to hear music from the Deck you need to adjust the Mixer controls of the respective Mixer channel and set the crossfader accordingly. Then you can start the Playback and the Waveform will start moving. For more information, refer to Mixing Your First Two Tracks.

5.Finding and loading another Track: While the first track is playing you can browse for the next track in your Track Collection and load it into another Deck. For more information, refer to Mixing Your First Two Tracks.

6.Syncing the Tracks: Since TRAKTOR has calculated the tempos and the Beatgrids for both tracks, you can sync the next track with the track that is currently playing by using the SYNC button on the stopped Deck. Now when playing back the next track, the beats of both tracks will perfectly match. You can also sync the tracks manually by using the tempo and synchronization controls provided on any Deck. For more information, refer to Mixing Your First Two Tracks.

7.Previewing the transition: The Mixer provides you with the controls to preview the next track when preparing the transition, using your headphones. This allows you to find the right position for starting playback, and you can then fade the track in using the crossfader. For more information, refer to Using the Cue Channel for Mixing.

8.Using Equalizer and adding Effects: To make transitions more flawless, the Mixer is equipped with equalizer controls for tweaking frequency bands in the audio signals. Furthermore, TRAKTOR provides FX Units and Mixer FX for modulating the audio signals. For more information, refer to Using the Equalizer, Working with FX Units, Working with Mixer FX

9.Cueing using Hotcue buttons: You can create Cue points and store them on Hotcue buttons. When later loading the track, you can trigger the Hotcues and the playback will instantly continue from the stored cue point position. For more information, refer to Working with Hotcue buttons and Flux Mode, Working with Cue Points.

The TRAKTOR Workflow

10.Looping: TRAKTOR provides you with Loop controls for enabling Loops in pre-defined sizes. As with Cue points, Loops can be stored using the Hotcue buttons and triggered at a later time. For more information, refer to Working with Hotcue buttons and Flux Mode, Working with Loops.

11.Remixing: Using the STEM Decks, you can perform your music by taking out entire musical elements in STEM Files. You can also remix your music using Loops and One-shot Samples in Remix Decks. For more information, refer to Working with STEM Decks Working with Remix Decks.

Setting Up TRAKTOR

5. SETTING UP TRAKTOR

This section assumes you have already installed TRAKTOR PRO 3 using NATIVE ACCESS, and that you can start to configure TRAKTOR for its first use. If this is not the case, follow the instructions using this link Registering and Installing a Native Instruments Product using NATIVE ACCESS.

TRAKTOR can be used in various setups. Besides using TRAKTOR with a dedicated TRAKTOR KONTROL hardware controller, it can also be used with an external audio interface (with or without an external DJ Mixer).

It can also be used with a MIDI controller of another manufacturer. In this case, you need to load the specific controller mapping file or you create a custom controller mapping yourself.

TRAKTOR with External Audio Interface

This section and so this documentation assumes you are using TRAKTOR with at least an external audio interface with one stereo output and a stereo headphone output. This way we can make sure the workflows explained also apply to TRAKTOR setups using any other external audio equipment or controller with an integrated audio interface.

Of course you can use TRAKTOR with your the built-in sound card. However, you are then only using the stereo output.

The steps in this section will guide you through the process of configuring TRAKTOR using an external audio interface.

TRAKTOR Configuration Steps

When starting TRAKTOR for the first time, you need to configure TRAKTOR so that it works in your specific setup. The following steps for configuring TRAKTOR are required:

1.Importing Data from previous installations: If you have installed a previous TRAKTOR installation, TRAKTOR asks you to import the data. For more information, refer to Importing Your Data from a Previous TRAKTOR Version [14].

2.Configuring TRAKTOR using the Setup Wizard: The Setup Wizard helps to you configure TRAKTOR step-by-step. For more information, refer to Pre-Configuring TRAKTOR using the Setup Wizard [14].

3.Configuring TRAKTOR for using the external audio interface: When connecting an external audio interface, TRAKTOR automatically sets the Mixing Mode to External Mixing. For more information on setting up TRAKTOR with an external audio interface, refer to Configuring TRAKTOR to Use with an External Audio Interface [14]

4.TRAKTOR Layouts and Layout Switcing: TRAKTOR provides several Layouts that display more or less elements, depending on use case. For more information, refer to TRAKTOR Layouts and Layout Switching [15].

Setting Up TRAKTOR

5.1. Importing Your Data from a Previous TRAKTOR Version

When you start TRAKTOR for the first time, TRAKTOR will ask if you want to import your previous data by copying the existing user content to a new folder in your user folder. Your previous data will not be altered if you copy it to the new default folder.

5.2. Pre-Configuring TRAKTOR using the Setup Wizard

When starting TRAKTOR for the first time, you are provided with the Setup Wizard. In a few steps, the Setup Wizard guides you through the process of configuring TRAKTOR. It can also be used to reset TRAKTOR to an out-of-the-box setup.

Setup Wizard Pages

1.The WELCOME page asks you to connect any controllers and devices to your computer.

2.The MIXER SETUP page asks you to select whether or not you want to use TRAKTOR with a controller different than TRAKTOR KONTROL. If yes, on the next page you can choose the controller manufacturer and model from the drop-down lists.

3.On the DECK LAYOUT page you can select whether or not you are using Timecode vinyls or CDs to externally control TRAKTOR’s Decks. Furthermore, you can select how many Decks and the Flavors you want to use. This can also be changed from within the software.

4.The SUMMARY Page shows you the configuration of TRAKTOR. You can click Back to change the settings made, Cancel to close the Setup Wizard completely, or Finish, which confirms your configuration.

Starting the Setup Wizard

You can start the Setup Wizard in two ways:

1.Select Start Setup Wizard in the Help menu of the Application Menu bar (not visible in Fullscreen mode).

2.Or click the Setup Wizard button at the bottom left corner of the Preferences dialog window.

5.3. Configuring TRAKTOR to Use with an External Audio Interface

To use TRAKTOR’s preview feature, you need to have an audio interface with two independent stereo outputs, one for the Master Out and one for the Headphones CUE channel. Refer to the manufacturer’s manual for installing and connecting your external audio interface.

In TRAKTOR, do the following:

1.Click the Preferences button in the Header to open the Preferences.

2.Select the Audio Setup page.

3.Select your external audio interface from the Audio Device drop-down menu.

4.Open the Output Routing page.

5.Select Internal under Mixing Mode.

6.Select an output pair for Output Master and one output pair for Output Monitor.

Setting Up TRAKTOR

7.If your audio device provides another output, you can assign this to the Output Record.

8.Close the Preferences. TRAKTOR is now configured.

5.4. TRAKTOR Layouts and Layout Switching

TRAKTOR uses a set of user interface layouts to organize its graphical user interface. These are called Layouts. You can access them from TRAKTOR’s Layout selection drop-down menu in the software’s Header. Depending on which Layout you select, certain elements of the user interface will be displayed while others will remain hidden.

Available Layouts

The following Layouts are available:

•Mixer: The Mixer Layout is optimized for using TRAKTOR with the computer keyboard and the mouse. This Layout shows all available controls of the internal Mixer, the crossfade controls, and the Headphone Cue controls. The Decks provide all the required controls for adjusting tempo and syncing.

•Extended: The Extended view shows TRAKTOR’s Global Section with the FX Units, and extends the Decks with more controls and further track information. You are also provided with the buttons and knobs for assigning the FX Units to the Mixer channels and for applying MIXER FX.

•Essential: The Essential Layout shows TRAKTOR in a reduced appearance with the most important control elements for basic mixing. This Layout is optimized for mixing using an external controller, as the internal Mixer is not displayed. The Browser takes up the majority of the application window and the Decks only show the Waveform displays, the Stripe-view, and the transport controls.

•Browser: The Browser Layout maximizes the Browser and minimizes the Decks to only the Stripe view. The Mixer is not visible.

Besides the provided Layouts, you can adjust a graphical user interface to your needs and save it in a custom Layout that you can also select from the Layout selection drop-down menu. For more Information about creating Layouts, refer to Preferences – Layout Manager Tab [156].

Switching Layouts

To switch to another Layout:

•Select the Layout from the Layout selection drop-down menu in the Header.

TRAKTOR Overview

6. TRAKTOR OVERVIEW

The picture below shows the interface of TRAKTOR.

2

3

4

5

TRAKTOR PRO 3 user interface.

(1) Application menu: Provides access to basic functions and information about the software. For more information, refer to Application Menu.

(2) Header: Here you can find various status indicators and useful functions and buttons, e.g., the Preferences button. For more information, refer to Header.

(3) Global section: The Global section contains the FX Units, the Master Control panel, the AUDIO RECORDER, and the LOOP RECORDER. For more information, refer to Global Section.

(4) Decks: TRAKTOR provides you with the four virtual Decks A, B, C, and D. The Decks are where tracks, Stem files, and Samples are played back. If you previously selected to use only two Decks A and B from the Setup Wizard, you can enable the lower Decks C and D in the Preferences. For more information, refer to Decks and Deck Types [24].

(5) Mixer: The Mixer receives audio signals on its four Mixer channels, coming from the four Decks. The Mixer’s basic purpose is to adjust the relative level of each Mixer channel, to control the channels’ frequency content, possibly routing them into the FX Units, before sending the overall result to the master output. For more information, refer to Mixer [37].

(6) Browser: Lets you manage all your tracks in the Track Collection. You can group tracks in Playlists, sort them according to various attributes, and search within Playlists as well as in the entire Track Collection. For more information, refer to Browser.

TRAKTOR Overview

6.1. Application Menu

The Application menu provides access to File, View , and Help menus.

Application menu.

File: Contains options for setting up TRAKTOR:

•Preferences: Opens the Preferences dialog.

•Audio Setup: Directly calls up the Audio Setup page in the Preferences dialog.

•Controller Manager: Directly calls up the Controller Manager page in the Preferences dialog.

•Exit: Closes the TRAKTOR application.

View: Contains options for the TRAKTOR Layout:

•Layouts: Shows the list of available TRAKTOR Layouts you can select.

•Fullscreen: Switches the TRAKTOR application into Fullscreen view.

Help: Contains options for updating TRAKTOR and getting help:

•Check for Updates on Native Access: Calls up the Native Access application that is checking for available software updates.

•Downloads: Opens the web browser on your computer and directs you to the download page on the Native Instruments website.

•Get Started with TRAKTOR: Opens the web browser on your computer and directs you to the TRAKTOR video tutorials page on the Native Instruments website.

•Online TRAKTOR documentation: Opens the web browser on your computer and directs you to the Online TRAKTOR documentation page on the Native Instruments website.

•Start Setup Wizard: Launches the Setup Wizard for configuring TRAKTOR.

•Buy Upgrades and Accessories: Opens the web browser on your computer and directs you to the TRAKTOR products page on the Native Instruments website.

•About: Opens the about screen.

6.2. Header

The Header is located at the very top of TRAKTOR’s user interface and contains various status indicators, and useful functions and buttons.

Header.

TRAKTOR Overview

(1) TRAKTOR Logo: Clicking the TRAKTOR logo displays the about screen with the current version number of the TRAKTOR software, the credits, and some additional information.

(2) MIDI indicator: Indicates the incoming MIDI and Native (NHL) signals. The indicator lights blue while a signal is received.

(3) Connection indicator: Indicates if all listed controllers are connected. The indicator lights blue if all controllers are connected, orange if some controllers are connected, unlit if no controller is connected.

(4) Audio indicator: Indicates the connection to your audio interface. It lights up blue if an audio interface is connected, red if no audio interface is connected, orange if the internal soundcard selected. For more information, refer to Preferences Audio setup.

(5) LOAD indicator: Indicates how much computing time available per audio buffer is currently used by TRAKTOR to process audio data contained in one buffer. This value shows how much CPU load the audio processing requires and how much headroom is left before audio starts dropping out. The system should be kept at values below the LOAD indicator turning red.

(6) Master Output level meter: Displays the Master Output level. For more information, refer to GAIN.

(7) System Clock: Displays the time of day derived from the system time of your computer.

(8) Battery indicator: Indicates how much power remains in your computer’s battery. It lights up blue if a power supply is connected and red when running out of battery power.

(9) Recording indicator: Indicates the status of the AUDIO RECORDER. It lights up red when recording. For more information, refer to Recording Your Mix with the Audio Recorder.

(10) Layout selector: Provides you with a list of default TRAKTOR Layouts. For more information, refer to… Layouts TRAKTOR Layouts and Layout Switching.

(11) Maximize Browser button: Maximizes the Browser view by minimizing the sizes of the Decks, the Mixer, and the Global section.

(12) Preferences button: Opens the Preferences dialog. All TRAKTOR settings are made here. For more information, refer to Preferences.

(13) Cruise Mode button: Enables Cruise mode allowing you to automatically play one track after the other from a Playlist or your Track Collection. Cruise mode seamlessly takes over playback control. For more information, refer to Using Cruise Mode for Automatic Mixing .

(14) Fullscreen button: Enables Fullscreen mode. When enabled, none of the operating system’s controls are visible.

(15) NI Logo: Displays the about screen with the current version number of the TRAKTOR software, the credits, and some additional information.

6.3. Global Section

The Global section contains five distinct panels with global controls and recording functions: FX Unit 1 and FX Unit 2, AUDIO RECORDER, LOOP RECORDER, and the Master Control panel. Not all of the panels can be displayed at once. The Master Control panel is always visible. In the left panel you can display FX Unit 1 or the LOOP RECORDER, and on the right side you can display either FX Unit 2 or the AUDIO RECORDER. The panels can be selected using the corresponding buttons at the far left and right of the Global section.

TRAKTOR Overview

Global Section with FX Unit 1 and 2 displayed.

(1) FX Unit 1 and FX Unit 2: TRAKTOR offers four FX Units for tweaking the audio signals in the Mixer. By default, only FX Unit 1 and FX Unit 2 are enabled. All FX Units can be freely assigned to any of the Mixer channels A — D. For more information, refer to Section 6.3.2: FX Units.

(2) Master Control panel: The Master Control panel is a central component of TRAKTOR. It lets you control the MAIN volume, and defines the behavior for setting Cue Points and Loops as well as enabling and disabling the Master Limiter. It also contains the Master Clock and works as a tempo reference for the Sync function and the effects. Here you can also join or start network sessions via Ableton Link, or send a MIDI Clock signal to external hardware and software. For more information, refer to Master Control Panel.

Global Section with the LOOP RECORDER and AUDIO RECORDER displayed.

(1) LOOP RECORDER: The LOOP RECORDER allows you to instantly create Loops from the Mixer’s main output signal, from a particular Deck, or from an external audio input. For more information, refer to Loop Recorder.

(2) AUDIO RECORDER: The AUDIO RECORDER enables you to record your mix from the main output as well as from other a physical audio inputs. For more information, refer to Audio Recorder.

6.3.1. Master Control Panel

The Master Control panel is a central component of TRAKTOR. It allows you control the MAIN volume, and defines the behavior for setting Cue Points and Loops. It also contains the Master Clock and works as a tempo reference for the Sync function and for the effects. Here you can also join or start network sessions via Ableton Link, or send a MIDI Clock signal to external hardware and software.

1 2 3

8

7 5

Master Control panel.

TRAKTOR Overview

(1) SNAP: Enables SNAP mode. When SNAP mode is enabled, Cue Points or Loops are always set to the closest beat. The button lights up blue when enabled.

(2) MASTER CLOCK TEMPO display: Displays the current tempo and offset of the Master Clock. You can enter a new tempo with a double-click.

(3) MAIN knob: Controls the main output volume.

(4) LIMITER: Enables the Limiter for the main output signal. When enabled, the main output level meter shows the Limiter position right before the red LEDs. For more information, refer to Adjusting Gain Levels for Incoming Audio Signals.

(5) MASTER: When enabled you can play on four Decks with a stable tempo reference. It is also the mode to be used when TRAKTOR is sending out the master tempo via MIDI Clock messages to another application or hardware being slaved to TRAKTOR.

(6) AUTO: When enabled TRAKTOR automatically selects one of the Decks as Tempo Master. The Master Clock then automatically syncs to the Master Deck.

(7) LINK: Syncs TRAKTOR to an Ableton Link session and gives additional status information. For more Information, refer to Synchronization using Ableton Link. When the Enable MIDI Clock setting is enabled in the External Sync Page in the Preferences, LINK is replaced by EXT. For more information on, refer to Syncing TRAKTOR via MIDI Clock.

(8) QUANT: Enables Quantize mode. Quantize mode lets you jump between Cue Points and Stored Loops seamlessly and without losing sync. Skipping in the track in Quantize mode brings the playhead position to the next destination without losing sync. The button lights up blue when enabled.

Further Master Clock Controls

When hovering the mouse over the MASTER CLOCK display you are provided with additional Master Clock controls.

2

4 3

Master Control panel.

(1) TAP button: With this button you can tap in the desired Master Clock tempo.

(2) Master Clock Bend buttons: Slows down or speeds up the Master Tempo momentarily.

(3) MASTER CLOCK Tempo Up / Down buttons: Decreases or Increases the Master tempo step-wise.

(4) Metronome (Master Clock Tick): Toggles an audible metronome beat tick with the Master Clock as source on or off.

TRAKTOR Overview

Further MIDI Clock Sync Controls

When the MIDI Clock is enabled in the Preferences, the Master Control panel expands providing further MIDI Clock controls. For more information, refer to Preferences – External Sync Page.

1

2

3

Master Control panel.

(1) Offset display: Indicates the offset for the synchronization.

(2) MASTER CLOCK START: Enables or disables MIDI Clock for external synchronization.

(3) MASTER CLOCK SYNC: Resets the external devices (slaves) connected via MIDI clock.

6.3.2. FX Units

TRAKTOR offers four FX Units which give you the control of adding FX to your mix. By default there are only two FX Units enabled — FX Unit 1 and FX Unit 2. Each FX Unit can be assigned to any Mixer channel individually or to more than one Mixer channel at a time. The FX Units are located on the left and the right side in the Global section. A click on the FX Unit buttons labeled FX on either end of the Global section shows the corresponding FX Unit.

The FX Units are used as insert effects by default, but you can also use them as post-fader effects and as Send effects. The FX Units are freely configurable.

Additionally, you can choose from two different FX Unit modes in TRAKTOR: Either Single FX mode, where four buttons and four knobs control one effect, or Group FX mode, where you can use chain of three three effects. For more Information on using the FX Units, refer to Working with FX Units.

FX Units in Single FX Mode

In Single FX mode you get full control over all parameters of a single effect.

FX Unit 1 in Single FX Mode.

TRAKTOR Overview

In Single FX mode you get full control over all parameters of a single effect.

(1) FX Unit Config drop-down menu: Opens a drop-down menu for configuring the FX Unit and taking snapshots. Additionally, the number identifies the FX Unit and the selected FX mode.

(2) D/W knob: Controls the direct-to-processed signal mix.

(3) FX Selector: Selects the effect to be controlled in the FX Unit.

(4) — (6) FX Parameter control 1 — 3: Modulates the parameters for the selected effect.

(7), (8) FX buttons 1 — 2: Controls the selected effect. The exact function depends on the selected effect.

(9) RST button: Resets all parameters for the selected effect. This button is not available for all effects.

(10) FX On button: Switches the effect on and off. If on, the buttons light up yellow.

FX Unit 1 in Group FX Mode

In Group FX mode you can control up to three FX at once in one FX Unit.

FX Unit 1 in Group FX Mode.

(1) FX Unit Config drop-down menu: Opens a drop-down menu for configuring the FX Unit and taking snapshots. Additionally, the number identifies the FX Unit and the selected FX mode.

(2) D/W knob: Controls the direct-to-processed signal mix for the entire effect chain.

(3) FX Selector 1 — 3: Selects the effect to be controlled in the FX Unit.

(4) — (6) Effect Amount knob 1 — 3: Controls the individual effect amount.

(7) — (9) Effect On buttons 1 — 3: Switches every effect in the effect chain on and off.

(10) FX On button: Switches the effect on and off.

6.3.3. Audio Recorder

The Audio Recorder in TRAKTOR is used for recording your mixes or audio from an external source e.g. your mix with an external mixer, a microphone, or a turntable. It is also used for broadcasting your mix. A click on the Tape icon displays the AUDIO RECORDER in the Global Section.

TRAKTOR Overview

AUDIO RECORDER.

(1) Broadcast button: Starts broadcasting your mix once a server has been installed and configured.

(2) Display: Shows the actual file size and recorded time.

(3) CUT button: Saves the recording until the current recording time and seamlessly starts a new file for recording.

(4) AUDIO RECORDER button: Opens the AUDIO RECORDER. (5) Recording meter: Indicates the current recording level.

(6) Record GAIN knob: Adjusts the level for the incoming audio signal.

(7) Record button: Starts and stops recording and saves the recorded file in the Recordings folder.

6.3.4. Loop Recorder

The LOOP RECORDER allows you to record Loops from several sources on the fly. A click on the LOOP RECORDER button on the left side of the Global section displays the LOOP RECORDER.

LOOP RECORDER.

(1) DRY/WET knob: Adjusts the ratio of main-to-recorded signal. (2) Progress bar: Displays the current length of the recording. (3) SIZE button: Determines the initial length of the recording.

(4) Delete / Undo / Redo: Deletes the recorded Loop, undoes the last overdubbing, and restores last undo.

(5) Play button: Starts and stops playback of the recording.

(6) Record button: Starts and stops the recording and the overdubbing.

TRAKTOR Overview

(7) Source drop-down menu: Selects the source for the recording.

(8) LOOP RECORDER button: Opens the LOOP RECORDER.

If you’re using TRAKTOR with the SCRATCH feature and are therefore in External Mixing mode, the only available recording source to select is EXT.

6.4. Decks and Deck Types

TRAKTOR provides you with four virtual Decks. These Decks can be operated in different Deck Types which are Track Deck, STEM Deck, Remix Deck, and Live Input:

The Decks contain common Deck elements and as well contain their own specific Deck elements. For more information, refer to Common Deck Controls.

•Track Deck: The Track Deck in TRAKTOR represents the equivalent of a turntable or a CD player used to play back conventional tracks in a classic mixing setup. For more information, refer to Track Deck.

•STEM Deck: The STEM Deck is capable of playing back and remixing STEM Files (.stem.mp4). The functionality is basically identical to the Track Deck, but features additional sub-mix controls for the four Slot Volumes, Filters, and FX Sends for the STEM Parts. For more information, refer to STEM Deck.

It is mandatory that STEM Files have to be analyzed before loading them into a STEM Deck. It is not possible to load and play a STEM File before it has been analyzed.

•Remix Deck: The Remix Deck provides you with four Sample Slots, for adding Samples and loops to your mix. You can load, create and save complex Remix Sets, and arrange Samples live in your mix. The Remix Deck comes with a variety of Sample-related features. For more information, refer to Remix Deck.

•Live Input: The Live Input is not a Deck, but it allows you to include live audio from an external source in your mix. This can be from any audio input, i.e. a turntable, a microphone, or a synthesizer. For more information, refer to Live Input.

6.4.1. Common Deck Controls

Besides the Live Input, any Deck provides the same synchronization, trigger, and track modification controls. The following image shows a full Deck:

TRAKTOR Overview

9

5 8

6

Common Deck controls.

(1) Deck Header: Displays information about the loaded track, like the artist name or track title. By double-clicking the Deck Header, you can switch the Deck layout between five different views from minimized to full layout. For more information, refer to Deck Header.

(2) Deck Tempo display: Contains information about the track tempo. Depending on Deck Type, the contained elements and controls slightly differ. For more information, refer to Deck Tempo Display on the Remix Deck.

(3) Deck Focus: Identifies the Deck and holds a menu for selecting the Deck Flavor and the playback mode for the Deck. Each Deck is named by a letter A, B, C and D. The letter of the focused Deck is highlighted in orange.

(4) Synchronization and Tempo controls: Define if the Deck is the Tempo Master or if it is synced to the Tempo Master. The controls visualize if the track is out of sync, and they contain tempo bend controls. For more information, refer to Synchronization and Tempo Controls.

(4) Deck center: Hosts the elements and controls the characteristic of the selected Deck Flavor. For more Information, refer to Track Deck,STEM Deck,Remix Deck, and Live Input.

(5) Loop controls: Activate looping and define the loop size. For more information, refer to Loop Controls.

(6) Advanced panel: On the Track Deck and on the Stem Deck, the Advanced panel contains advanced control options for Cue Point and Loop management. On the Remix Deck the Advanced panel gives you access to the parameter settings of the individual Sample Cells. For more information, refer to Advanced Panel [33] and Advanced Panel on the Remix Deck.

(7) Advanced panel button: Shows and hides the Advanced panel below the Loop controls for Deck A and B, and for Deck C and D, respectively. It also shows and hides the Panorama controls in the Mixer for Deck A and B, and for Deck C and D, respectively.

(8) Transport controls: Contain the usual transport controls Play/Pause and CUE as well as the Flux mode and Reverse mode buttons. For more information, refer to Transport Controls.

TRAKTOR Overview

Deck Header

The Deck Header displays information about the loaded track, Remix Set, or STEM File such as the artist name, track title and tempo. The displayed information can be customized in the Preferences.

Deck Header.

(1) Track Cover Artwork: Displays the cover artwork of the track.

(2) Track title: Displays the track title.

(3) Artist name: Displays the artist name.

(4) Album title: Displays the album title.

(5) Track time: Displays the track time.

(6) Remaining track time: Displays the time remaining until the track ends.

(8) Current tempo: Displays the current tempo value in BPM, determined by the Tempo Fader position.

(7) Tempo fader position: Reflects the current Tempo fader position as a percentage.

(9) Base tempo: Represents the original track tempo.

Deck Tempo Display on the Remix Deck

The Deck Tempo display in the Remix Deck’s Header contains further controls for the Remix Deck.

3 5

8 6

Deck Tempo display on the Remix Deck.

(1) Quantize value drop-down menu: Selects the quantize value.

(2) Quantize value: Shows current quantize value for the Remix Deck.

(3) Quantize enable: The dot enables or disables Quantize mode on the Remix Deck. Quantize is enabled when the dot is lit blue.

(4) Remix Deck Tempo: Shows the current Tempo of the Deck. Dragging this value up and down changes the Tempo. A double-click resets it to the base tempo.

TRAKTOR Overview

(5) Tempo fader position: Represents the current Tempo fader position.

(6) Base tempo: Represents the original Remix Deck tempo. You can enter a new value by dou- ble-clicking.

(7) Capture source: Represents the selected source for capturing Samples when using hardware controllers. The triangle that appears when hovering with the mouse, opens a drop-down menu where you can select the source.

(8) Beat Count: Represents the current internal Beat Count position of the Remix Deck. Synchronization and quantize functions are based on this value.

Synchronization and Tempo Controls

Any Deck Type contains the same controls for syncing and for adjusting the tempo manually.

Synchronization and Tempo controls.

(1) SYNC button: Synchronizes the current track to the Tempo Master.

(2) MASTER button: Sets the Deck to the Tempo Master.

(3) Phase meter: Visually indicates the offset of the beats when manually syncing a track to the Tempo Master or the Master Clock.

(4) Tempo bend buttons: Correct the offset of the beats when manually syncing a track to the Tempo Master or the Master Clock. The left arrow slightly slows down the tempo and the right arrow speeds it up.

(5) Tempo fader: Decreases or increases the tempo of the playing track, Remix Set, or STEM File in the respective Deck.

Transport Controls

All Deck Types contain the same transport controls, which are used for playing back tracks with TRAKTOR’s internal playback mode.

5

Transport controls.

TRAKTOR Overview

(1) Play/Pause button: Starts or pauses playback of the Deck.

(2) CUE button: Depending on the playback state, this button either sets a new Floating Cue Point or jumps to the previously set Floating Cue Point. For more information on Cue points, refer to.

(3) CUP button (CUE/Play): Jumps to the current cue point and starts playback upon release.

(4) Flux Mode button: Enables Flux mode for the Deck. For more information on Flux Mode, refer to Working with Hotcue buttons and Flux Mode.

(5) Reverse Mode button: Enables Reverse mode and Flux Mode for the Deck. For more information on Reverse mode, refer to Working with Hotcue buttons and Flux Mode.

Scratch Controls

When setting the Deck’s playback mode to Scratch Control, the CUE and CUP buttons are replaced by the Absolute Mode button and the Relative Mode button.

2

Transport controls in Scratch Playback mode.

(1) Relative Mode button: Enables Relative mode for controlling the Deck with Timecode vinyl or CD.

(2) Absolute Mode button: Enables Absolute mode for controlling the Deck with Timecode vinyl or CD.

Loop Controls

The Loop controls offer the functions required for the creative usage of Loops in your mix.

1

Loop controls.

(1) Active Loop: When a Loop is enabled it is highlighted in green in the Waveform display and in the Stripe view.

(2) Arrow buttons: Clicking the left and right arrows of the Loop Size control will scroll through the list of Loop values. The Arrow buttons flash if the selected size is out of range.

(3) Loop size control: Determine the size of the enabled or disabled Loop.

TRAKTOR Overview

(4) Loop In button: Sets the start point for the Loop.

(5) Loop Out button: Sets the end point for the Loop. The Loop will be enabled when the playback position reaches these two points and the ACTIVE button will be highlighted.

(6) ACTIVE button: Enables/disables Looping. The button lights up green when Looping is enabled.

6.4.2. Track Deck

The Track Deck in TRAKTOR is the equivalent to a turntable or a CD player in a classic mixing setup, used to play back conventional tracks. Besides the Common Deck controls, the Track Deck’s center contains the following elements:

1

2

Track Deck.

(1) Waveform display: Visually represents a localized view of the loaded track. The brighter color shade represents higher frequencies, while the darker color shade represents lower frequencies. It also shows the Beatgrid markers, and shows zoom controls when hovering the mouse over the Waveform display.

(2) Stripe view: The Stripe view shows the entire waveform of the track including all Cue Point markers and Loop markers. You can jump back to the start of the track or directly jump within the track by clicking inside the Stripe view. You can also activate Keylock for the track.

6.4.3. STEM Deck

The STEM Deck operates in a similar way to the Track Deck, however instead of the Waveform display it provides the Multi-Track Waveform:

TRAKTOR Overview

1

2

STEM Deck.

(1) Multi-Track Waveform: Visually represents a localized Multi-Track Waveform of the individual STEM Channels including STEM controls of the loaded STEM File. The brighter color shade represents higher frequencies, while the darker color shade represents lower frequencies.

For more information on the Multi-Track Waveform, refer to section Section : Multi-Track Waveform.

(2) Stripe view: Shows the entire Waveform of the STEM File including all Cue Point markers and Loop markers. You can jump back to the start of the track or directly jump within the track by clicking inside the Stripe view. You can also activate Keylock for the STEM file.

Multi-Track Waveform

The Multi-Track Waveform shows the waveforms of the STEM Parts, and provides controls to adjust volumes and apply effects individually.

4

Multi-Track Waveform.

(1) STEM channel 1 — 4: Each of the four rows represents one STEM Channel, including the individual STEM Part name.

(2) Volume control: Every STEM Channel provides a Volume control for adjusting the volume individually. All STEM controls can be hidden using the small arrow button.

(3) Filter controls: Every STEM Channel provides Filter controls. The Filter button enables the Filter, whereby the Filter knob determines the Filter amount.

TRAKTOR Overview

(4) FX Send control: Every STEM channel provides FX Send controls. The FX Send button enables FX Send mode for the individual STEM Channel, whereby the FX Send knob determines the FX Send amount.

(5) Waveform: Each STEM Channel displays the waveform of the contained STEM Part in a different color, as well as the Beatgrid.

6.4.4. Remix Deck

Besides the Common Deck controls, the Remix Deck’s center contains the following elements:

1

2

Remix Deck.

(1) Sample Slot: The Remix Deck shows four Samples Slots containing the Samples, trigger controls other elements. For more information, refer to Sample Slot.

(2) Advanced panel: The Advanced panel on the Remix Deck contains options for i.e. adjusting Sample Grids. For more information, refer to Advanced Panel on the Remix Deck.

Sample Slot

A Sample Slot contains the following elements:

6

4 5

Sample Slot.

TRAKTOR Overview

(1) Sample title: Displays the title of the Sample loaded in the Slot Player.

(2) Slot Player: Displays the waveform of the Sample currently loaded. A moving red playhead indicates the current playback position within the Sample. Hovering the mouse over the Slot Player shows a Mute button, which mutes/unmutes the Sample.

(3) Volume control: Controls the Sample Slot’s volume. This control is applied after the individual Gain control of a Sample Cell, which is accessible from the Advanced panel.

(4) Filter control: Applies a low-pass or high-pass filter to the Sample Slot by moving the bar downwards or upwards, respectively.

(missing) Sample Cell: Represents the container for Samples in the Sample Slot.

(5) Play Type indicator: Indicates whether the Sample Cell is set to Loop or One-shot mode. Clicking this symbol also triggers the Sample.

(6) Page Selector: Selects the current Page with Samples for the Remix Set.

1 2

Sample Slot hovered.

(1) Sample Slot parameters: Each Sample Slot has a set of parameters. Hovering the mouse over the Sample Slot Player or Sample title displays the relevant parameters:

•Keylock button: Separates the playback key from the playback speed. This control needs to be activated to adjust the Sample Cell’s pitch in the Advanced panel. Otherwise, the Sample Cell’s pitch directly relates to the Remix Deck’s tempo.

•FX button: Routes the Sample Slot through the FX Unit(s) currently assigned to the Mixer channel for the Remix Deck.

•Monitor button: Routes the Sample Slot to the Mixer’s Monitor Output (which can be monitored in headphones).

•Punch mode: When a Sample is triggered, the position of that Sample is fixed to the Remix Deck’s internal timeline.

(2) Sample Mute: Mutes/un-mutes the Sample Slot.

6.4.5. Live Input

When selecting the Deck Flavor Live Input, you can route the audio signal from an external audio source into TRAKTOR and add it to your mix. The Live Input does not provide any control elements apart from the Deck focus.

TRAKTOR Overview

Live Input.

6.4.6. Advanced Panel

On the Track Deck and on the STEM Deck, the Advanced panel contains advanced control options for Cue Point and Loop management, and for correcting the Beatgrids for your tracks. On the Remix Deck, the Advanced panel gives you access to the parameter settings of the individual Sample Cells. For more information on the Advanced panel on the Remix Deck, refer to Advanced Panel on the Remix Deck.

Advanced panel.

(1) Advanced panel button: Shows and hides the Advanced panel below the Loop controls for Deck A and B, and for Deck C and D, respectively. It also shows and hides the Panorama controls in the Mixer for Deck A and B, and for Deck C and D, respectively.

The Advanced panel can only be displayed when the Deck is displayed in full Deck layout and in advanced Deck layout.

(2) Advanced panel page selector: Selects one of three Advanced panel pages; MOVE, CUE, and GRID containing individual control and editing elements.

TRAKTOR Overview

•CUE: Provides direct access to 8 user-definable Cue/Loop In Points per track, as well as further Cue Point management controls. For more information, refer to Working with Cue Points.

•MOVE: Provides options for moving the active Loop within the track as well as jumping the current playhead position within the track by beats. For more information, refer to Working with Loops.

•GRID: Provides control over the Beatmarker, the Beatgrid, and the stored tempo of a track. For more information, refer to Correcting Beatgrids.

Advanced Panel – Cue Page

Provides direct access to eight user-definable Cue/Loop In Points per track, as well as further Cue Point management controls. For more information, refer to Section 8.8: Working with Hotcue buttons and Flux Mode, Section 9.1: Working with Cue Points, and Section 9.2: Working with Loops.

1

Advanced Panel – CUE page.

(1) Hotcue 1-8: Allows you to directly set or access eight Hotcue or Loop In Points per track.

(2) Prev Cue / Next Cue: Skips backward or forward to the previous or next stored Cue Point in the track.

(3) Cue Point Position: Displays the position of the selected Cue Point or Loop in minutes : seconds : milliseconds.

(4) Cue Point List: Selects the Cue Point.

(5) Cue Point Type menu: Provides a list of several Cue Point Types.

(6) Delete Cue Point: Deletes the selected Cue Point or Loop In Point.

(7) MAP: Enables Hotcue Mapping mode. When enabled, pressing a Hotcue button will map the displayed Cue Point or Loop In Point to it.

(8) STORE: Stores the selected Cue Point and maps it to the next free Hotcue button.

Advanced Panel – MOVE Page

The Move page provides options for moving the active Loop within the track, as well as for jumping the current playhead position withig the track by beats. For more information, refer to Working with Loops.

TRAKTOR Overview

6

Advanced Panel – MOVE page.

(1) Move Mode menu: Selects one of the Move modes BeatJump, Loop, Loop In, and Loop Out.

(2) Move Size control: Selects the step size in beats.

(3) LOOP mode: Selects a step size that is based on the current Loop size for the movement.

(4) Cue Move BWD: Depending on the selected Move mode, the selected issue is moved backwards at the selected step size.

(5) Cue Move FWD: Depending on the selected Move mode, the selected issue is moved forward at the selected step size.

(6) FINE mode: Selects a fine step size for the movement. Use this for fine adjustments.

Advanced Panel – GRID Page

Provides control over the Beatmarker, the Beatgrid, and the stored tempo of a track. For more information, refer to Correcting Beatgrids.

Advanced Panel – GRID page.

(1) Move Grid BWD: Moves the Grid backward.

(2) Move Grid FWD: Moves the Grid forward.

(3) BPM INC (Increase): Precisely increases the BPM in minor steps. As a result the Beatgrid gets narrower=.

(4) BPM DEC (Decrease): Precisely decreases the BPM in minor steps. As a result the Beatgrid gets expanded.

(3) Analysis Lock button: Locks all values against future changes by the track analysis and by the user.

(4) Beat Tick: Enables an audible beat tick (metronome) to help align the Beatgrid during playback. In Internal Mixer mode, the Beat Tick is only audible on signals cued over the headphones. In External Mixer mode, the tick is laid over the Deck’s Mixer channel signal when Headphone Cue on the Internal Mixer is active.

TRAKTOR Overview

(5) BPM Edit Display: Shows the current BPM value of the track. A double-click enables manual tempo adjustment.

(6) Set Gridmarker: Sets a Gridmarker at the current playback position.

(7) Delete Gridmarker: Deletes the last set Gridmarker.

(8) BPM /2: Halves the BMP Edit Display.

(9) BMP x2: Doubles the BMP Edit Display.

(10) AUTO Grid: Calculates the BPM of the current track and sets a Gridmarker next to the current playback position. This function is only available for previously analyzed tracks.

(11) RESET Gridmarker: Resets the set BMP and recalculates it.

(12) TAP: Sets the BPM based on how fast or slow the button is tapped. The BPM will be adjusted after the fourth tap.

6.4.7. Advanced Panel on the Remix Deck

Each Sample Cell has a set of individual parameters, which are accessible from the Remix Deck’s Advanced Panel. The Advanced panel can only be displayed when in Full Deck Layout or Advanced Deck Layout.

Advanced Panel on the Remix Deck.

(1) SAMPLE PITCH control: Sets the pitch for the selected Sample in semitone steps.

(2) SAMPLE GAIN control: Sets the Gain level for the selected Sample.

(3) BPM x2: Doubles the tempo of the Sample.

(4) BPM Edit Display: Shows the current BPM value for the Sample. A Double-click enables manual tempo adjustment.

(5) Move Grid Left: Moves the Sample Cell’s Beatgrid to the left.

(6) Move Grid Right: Moves the Sample Cell’s Beatrgid to the right.

(7) Trigger Type: When enabled (Latch mode), a Sample will continue to play after you release the mouse button, either until the end of the Sample is reached (for One-shot Samples) or until it is stopped by some other method (like triggering a new Sample in the same Slot).

The alternative Type is Gate mode, where a Sample will only play while you’re holding down on the mouse button. Upon releasing the mouse button, the Sample will stop playing.

(8) Reverse Playback: Enables reverse playback for the Sample Cell currently being played in the Slot Player.

(9) Play Type: This property determines whether a Sample stops after reaching its end or if it continuously loops. When set to One-Shot (arrow symbol), a Sample will stop playing when it gets to

TRAKTOR Overview

its end. When set to Loop (ellipse symbol), the Sample will automatically return to its start and continue playing indefinitely.

(10) Sync Type: This property determines if the Sample should be synchronized to the Remix Deck’s Tempo or not. When SYNC is on, the Sample’s BPM will match the Remix Deck’s BPM. When SYNC is off, the Sample will play at its original speed.

(11) BPM Increase: Precisely decreases the BPM in minor steps. As a result the Beatgrid is expanded.

(12) BPM Decrease: Precisely increases the BPM in minor steps. As a result the Beatgrid becomes narrower.

(13) BPM /2: Halves the tempo of the Sample.

6.5. Mixer

The Mixer is the center of TRAKTOR , used to control and modulate the audio signals coming from the Decks before they are sent to the master output.

1

5

2

Mixer.

(1) Mixer channel: Contains the controls to adjust the Mixer channels’ volume and to modulate the audio signals’ frequency. Furthermore, you can assign the FX Units to the Mixer channel and route the audio signal to the Headphone Cue channel. For more information, refer to Mixer Channel.

(2) Crossfade controls: These controls allow you to make seamless transitions between various Mixer channels. For more Information, refer to Crossfade Controls

(3) Headphone Cue Mix: Let you adjust the Headphone Cue volume.

(4) Headphone Cue Vol: Determine the ratio of the cue-signal-to-master-signal in your headphones.

(5) AUX control: Controls the volume of the AUX input, which can be fed by an external signal like a microphone. For more inforamtion, refer to AUX Control.

The available Mixer controls differ depending on the current Mixing mode and the selected TRAKTOR Layout. If TRAKTOR is used in External Mixing mode, the channel faders, the crossfader, as well as Heaphone Cue controls are disabled.

TRAKTOR Overview

6.5.1. Mixer Channel

The Mixer channel contains the controls to adjust the Mixer channels’ volume and to modulate the audio signals’ frequency. Furthermore, you can assign the Mixer channel to the FX Units and rout the audio signal to the Headphone Cue channel.

13

13

6

11

7

9

8

Mixer channel.

(1) GAIN knob: Controls the pre-fader input level. GAIN is only visible when full size Deck Layouts are activated.

(2) GAIN View button: Enables/disables visibility of the GAIN button. When disabled, the the prefader input level cannot be adjusted manually.

(3) Channel Level Meter: Indicate the current volume of the audio signal in the Mixer channel. It also indicates if the signal is clipping.

(4) HI, MID, LOW EQ knobs: Adjusts the high frequencies in the audio signal.

(5) HI, MID, LOW Kill buttons: Complete takes out (kills) high frequencies from the audio signal.

(6) Mixer FX On button: Enables/disables the Mixer FX.

(7) Channel fader: The channel fader adjust the channel volume.

(8) CUE channel button: Sends the audio signal to the Headphone Cue channel for preview. For using the Cue function a multi-channel audio device is required. The Cue channel button is only visible when full size Decks Layout is enabled. For more information, refer to…Using the Cue Channel for Mixing.

(9) KEY button: Locks the key for the Deck.

(10) KEY knob: Controls the key of a playing track without affecting its tempo.

(11) FX Assign buttons: Assigns the individual FX Unit to the Mixer channel.

(12) Mixer FX drop-down menu: Adjusts the middle frequencies in the audio signal.

(13) Mixer FX Amount knob: The Mixer FX Amount knob controls the selected Mixer FX.

(17) PAN knob: Controls the balance between the left and right stereo channel for any Mixer channel individually. The PAN knobs are only visible when the Advanced Panels are opened.

TRAKTOR Overview

6.5.2. Crossfade Controls

These controls allow you to make seamless transitions between various Mixer channels.

2 1 2 4

Crossafde controls.

(1) Crossfader: Enables transitions between Decks by dragging it from one side to the other. The crossfader curve can be adjusted individually in the Preferences.

(2) Crossfader assign buttons: Allow to assign the Mixer channels to be audible either on the left or right crossfader position.

(3) Fade left / right buttons: Let the crossfader move to the dedicated direction step by step.

(4) Auto fade left / right button: Let the crossfader automatically move from one side to the other.

6.6. Browser

TRAKTOR’s Browser lets you load tracks into Decks and provides you with tools to organize your Track Collection.

7 2

3

6

4

5

Browser.

(1) Preview Player: Allows you to preview tracks before loading them into a Deck. For more information, refer to Previewing Tracks in the Browser.

(2) Search field: Provides a live search based on the tags of the tracks in the Collection. For more information, refer to Browsing for Music.

(3) Browser Tree: Displays the content of the selected folder:

•Track Collection: Contains all tracks imported to your Track Collection. They are automatically sorted by Artist, Release, Label or Genre.

•Playlists: Contains all your TRAKTOR Playlists.

TRAKTOR Overview

•Explorer: Lets you browse your hard drives for tracks. It also contains an Archive folder containing History Playlists.

•Audio Recordings: Contains all recordings created with the AUDIO RECORDER.

•iTunes: Provides direct access to your iTunes Library including all iTunes Playlists.

•History: Contains latest history playlists.

Each History Playlist is time-stamped and contains the additional columns Start-Time, Duration, Deck for more information about when and how you have played the tracks.

(4) Cover Artwork: Displays the Cover Artwork of the selected track in the Track List.

(5) Status bar: Displays the progress of track analysis, error messages, and the overall status of TRAKTOR.

(6) Track List: Shows tracks depending on the source that is selected (folder, Playlist, search results or tag-based).

(7) Favorites: Provides direct access to favorite Playlists and favorite folders.

Automatic Synchronization of Decks

7. AUTOMATIC SYNCHRONIZATION OF DECKS

This section introduces you the principles of the automatic synchronization features offered by TRAKTOR.

7.1. Tempo Master and Master Clock

The Tempo Master represents the reference tempo to which all other elements can synchronize. The Tempo Master can either be TRAKTOR’s internal Master Clock, or one of the Decks. The Tempo Master does not have to be the same throughout your mix, but there can only be one Tempo Master. When activating the Sync function on a Deck, TRAKTOR synchronizes the Deck to the Tempo Master.

7.2. Beatgrid

For a Deck to provide reliable tempo and beats as a Tempo Master or for syncing, the loaded track must first be analyzed by TRAKTOR. This analysis will determine the tempo (BPM) as well as the position of the beats; the result is the so-called Beatgrid. There is a specific Beatgrid for each of your tracks.

7.3. Automatic Syncing

Samples playing in Looped mode and time-evolving FX are always automatically synced to the current tempo master.

For Track Decks, you can decide whether to use the automatic Sync function or not — for example if you want to beat match tracks manually, or if you don’t want any beat matching at all.

7.4. Automatic Tempo Master Mode

With AUTO mode activated in the Master Control panel, TRAKTOR can automatically switch the Tempo Master between Track Decks. This happens when the Track Deck currently set as Tempo Master is stopped or when you load a new track onto it. This way, you don’t have to worry about setting the Tempo Master yourself. If there is no other Track Deck playing, the Master Clock would automatically become the Tempo Master indicated by the MASTER button in the Master Control panel.

The AUTO mode is activated by default.

Basic Usage Tutorials

8. BASIC USAGE TUTORIALS

This section introduces you to the basics of importing, browsing and previewing tracks as well as loading music to the Decks. The tutorials also guide you through the fundamentals of mixing your tracks, using Equalizer and Hotcues as well as using Mixer FXs.

8.1. Importing Music to the Track Collection

The most convenient way to get your tracks into TRAKTOR’s Track Collection is using drag and drop:

•Drag the music files from the location on your computer and drop them on the Track Collection folder in TRAKTOR’s Browser Tree.

TRAKTOR now analyzes the metadata of the music files and stores the files in the Track Collection.

8.2. Browsing for Music

The Browser lets you conveniently find the tracks you are looking for. You can navigate along the subfolders of the Track Collection in the Browser Tree or you can perform a text search in the Search field.

8.2.1. Navigating through Folders in the Browser Tree

To navigate the Browser Tree:

1.In the Browser Tree expand the Track Collection folder to show the subfolders.

2.Expand the subfolder of the metadata category by which you want to search a track, i.e. Artists.

3.Select the subfolder named by the artist to your liking, i.e. Native Instruments. The Track List now shows all the music according to the selected artist.

4.In the Track list browse for a track to your liking.

5.Load the track into Deck A by using drag and drop.

TRAKTOR now analyzes the entire track for calculating the tempo (BPM) to create the Beatgrid and the Waveform.

Basic Usage Tutorials

8.2.2. Performing a Text Search

You can perform a text search for the current playlist or in the Track Collection:

1.Click in the Search field.

2.Start typing the characters in relation to the track you are looking for. This can either be the track name, the artist, or another category.

Upon typing the Track List instantly filters the selected playlist.

3.Press [Enter] on your computer keyboard.

The Track list now provides you with all the music in the Track Collection matching your search query.

8.2.3. Previewing Tracks in the Browser

TRAKTOR’S Browser provides a Preview Player to preview tracks without loading them into a Deck and without changing the played stated and play count.

To use the Preview Player you need to assign an output to «Output Preview» (for External Mixer mode) or «Output Monitor» (for Internal Mixer mode). Find these settings on the Output Routing page in the Preferences.

To preview a track in the Preview Player:

1.Drag-and-drop a track from the Browser List onto the Preview Player.

The Stripe view is visible

2.Click the play button to start preview.

3.Click inside the Stripe view to skip within the track.

4.Click the play button again to stop preview.

8.3. Loading Music into Decks

To load a track, STEM file, or Remix Set into a Deck, you may use one of the following methods: using drag and drop or using the context menu.

Basic Usage Tutorials

Loading Music via Drag and Drop

•Drag the selected music from the Track List and drop it into the Deck to your liking. TRAKTOR now analyzes the track for its tempo (BPM) to create the Beatgrid and the Waveform. Depending on the selected track, the Deck flavor switches, i.e to a STEM Deck. The Track information are visible in the Deck Header.

Loading Music via Browser Context Menu

1.Right-click the track in the Track list to open the context menu.

2.Select the entry for the Deck you want to load the track in to, i.e Load into Track Deck A. TRAKTOR now analyzes the track for calculating its tempo (BPM) to create the Beatgrid and the Waveform.

The entries in the context menu differ according to the selected music. When rightclicking a Remix Set, the entries change to i.e. Load into Remix Deck A. If none of the Decks is currently a Remix Deck, the corresponding entries are not available in the Browser context menu. This also applies to STEM files.

8.3.1. Loading Tracks from Your iTunes Library

You can load tracks from your iTunes Library and Playlists directly from TRAKTOR. The iTunes folder in the Browser Tree directly accesses your iTunes Library and its Playlists. Editing functions are not available.

To load a track from your iTunes Library:

1.Select the iTunes folder in the Browser Tree to display its content in the Track List. A doubleclick expands the iTunes folder.

2.Browse for a track in the Track List or in the Playlists.

3.Drag the track and drop it into a Deck to load it.

Basic Usage Tutorials

8.4. Mixing Your First Two Tracks

In this section you learn to mix your first two tracks using Track Deck A and Track Deck B. At first you prepare the Mixer by adjusting the control elements for mixing from Deck A to B. Then you load the first track into Deck A, and begin to perform step by step.

8.4.1. Prerequisites

1.Set the crossfader to the left-most position.

2.Assign Mixer channel A to the left crossfader position.

3.Assign Mixer channel B to the right crossfader position.

4.Set Channel fader A to maximum position.

5.Set Channel Fader B to maximum position.

6.Set the MAIN knob to center position at 0.0 dB.

7.Set the volume of your audio system or active speakers to minimum level.

8.4.2. Loading the First Track into Deck A

1. Browse for a track to your liking in the Track Collection, i.e. the demo track Berlin Hauptbahnhof by Native Instruments.

2. Drag and drop the track into Deck A to load it.

TRAKTOR now analyzes the Track for its tempo and to create the Beatgrid and the Waveform.

8.4.3. Starting Playback of Deck A

To start playback on Track Deck A:

1.Click the Play button.

The waveform starts moving and the Channel Volume meter LEDs and the MAIN Volume Level meter LEDs start to illuminate.

2.Slowly increase the volume of your audio system or active speakers to a moderate listening level.

You now hear the audio of the track in your speakers.

Basic Usage Tutorials

8.4.4. Loading the Second Track into Deck B

1. Browse for a track with a similar tempo to your liking in the Track Collection, i.e. Lisa. 2. Drag and drop the track into Deck B to load it.

TRAKTOR now analyzes the Track for its tempo and to create the Beatgrid and the Waveform.

8.4.5. Syncing the Track Tempos

In order to Sync the tempos both both tracks:

•Click the SYNC button on Deck B.

The tempos of both tracks are now in sync, indicated by the equal tempo value in the Deck Header. The Tempo fader on Deck B has also moved accordingly and the SYNC button lights up.

8.4.6. Starting Playback of the Second Track

When the playback time of the Track in Deck A is almost over you can start the playback of Deck

B:

•Click the Play button on Deck B.

The waveform starts moving and the Channel Volume meter LEDs in Mixer channel B illuminate. The tracks in Deck A and Deck B play beat-accurate in sync.

8.4.7. Mixing in the Audio Signal

You can now mix in the audio signal of Mixer channel B into the main signal:

1.Drag the crossfader and slowly move it towards center position and hold for a moment.

The audio signal of the track in Mixer channel B is fading into the main signal.

2.While the track in Deck A reaches its end, slowly move the crossfader to the right-most position.

Basic Usage Tutorials

The audio signal of Mixer channel A slowly fades out of the main signal. Only Mixer Channel B is now audible. Alternatively to the crossfader you can also use the Fade left and Fade right buttons to move the crossfader step-wise, or you can even use the Autofade buttons to let the crossfader automatically move to the opposite side. You have mixed your first two tracks.

With the end of the playback of Deck A, Deck B automatically becomes the new Tempo Master and is ready for the next transition to another Deck.

•To mix another track repeat the aforementioned steps.

8.5. Adjusting Gain Levels for Incoming Audio Signals

In this section you briefly learn about the importance of adjusting or leveling the GAIN levels for incoming audio signals in the mixer as well as adjusting the outgoing master volume level to the connected sound system or active speakers.

Adjusting the levels at the several stages the DJ controls not only supports the audio quality of the mix and ensures the best possible dynamic range. It also prevents damaging ears of the audience and protects audio equipment, i.e. power amplifiers and speakers.

8.5.1. Dynamic Range

Each track has its own dynamic range. This means the maximum volume level of a single musical element in a track can be way louder than the average volume of all musical elements together. Besides different average audio levels, also the dynamic ranges can be different between tracks. That is why it is important to align the levels of the incoming audio signals to prevent them from clipping.

The normal dynamic range for an audio signal is between -∞ to ±0 dB.

8.5.2. Clipping

If an audio signal clips, the GAIN of the audio signal is too high. An audio signal clips if it exceeds the nominal level and also the headroom – normally at +6 dB. Then the audio signal starts to distort and looses dynamics and punch. Although the audio signal then seems louder, the entire audio quality decreases significantly. This critical audio signal can damage ears and audio equipment. That is why it is important to as well adjust the GAIN levels to protect ears and electronics.

To protect the audio equipment connected to the MAIN output stage, TRAKTOR uses an integrated Limiter. The purpose of the limiter is to prevent the signal from clipping by reducing the dynamic range.

However, the Limiter in TRAKTOR can be switched off.

Basic Usage Tutorials

Switching off the Limiter is not recommended.

8.5.3. Headroom

Before an audio signal starts to clip there is still a reserve to buffer transient audio speaks — the so called headroom. The headroom starts where where nominal level ends – at +0 db. It normally ends before +6dB.

However, the available Headroom in TRAKTOR can be adjusted in the Preferences or entirely switched off.

Switching off the Limiter is not recommended.

8.5.4. Always Level Incoming Audio Signals

When you mix using the Auto Gain function, the incoming audio signals from the Decks are always leveled by TRAKTOR automatically. This ensures none of your tracks dominate over the others.

The Auto Gain function is active by default. However, if you prefer to adjust the GAIN level by yourself, i.e. when using an external Mixer or a controller with integrated Mixer, you can also deactivate this feature in the Preferences. In this case you always have to make sure the audio levels always stay in the area before clipping.

Each Channel Meter of the blue LEDs in the Channel Level Meters.

8.6. Using the Equalizer

The EQ knobs and EQ Kill buttons are used for making sound adjustments to tracks while cueing and while mixing.

•The EQ knobs adjust the high, middle, or low frequencies in the audio signal.

•The Kill buttons completely take out (kill) high, middle, or low frequencies from the audio signal.

Using the EQs while cueing a track can support to manually align the tempos of the tracks. For more information, refer to cuing tracks.

Using the EQs can make transitions more flawless. The following example outlines a procedure on how to use the Equalizer during a transition.

Basic Usage Tutorials

8.6.1. EQing the Bass Frequencies of Tracks during Transition

The most common EQing technique is to take out the bass of the next track before the transition and to gradually bring it back in during the transition.

Assuming you want to transition tracks from Deck A to Deck B:

1.Before starting the transition, turn the LOW knob on Mixer channel B to minimum position for taking out the bass frequencies of the track in Deck B.

2.Progressively mix in Mixer channel B by gradually moving the crossfader from the left to the center position.

Both tracks are audible in the Master signal but the track on Deck B has no bass.

3.When you want to bring the bass back in, gradually increase the bass amount of Mixer channel B while simultaneously decreasing that of Mixer channel A using the LOW knobs on both Mixer channels.

Both tracks are still audible in the Master signal but the track on Deck A has no bass.

4.Complete the transition by gradually moving the crossfader all the way to the right. You mixed two tracks in conjunction with the Equalizer.

Alternatively to the EQ knobs, you can also use the EQ Kill buttons. These buttons are used for immediate killing the respective the frequency band of the audio signals during transitions as well as for performances in between.

Using the EQs during a transition to take out frequencies can avoid clipping that can easily occur when two tracks play together with full volume.

8.7. Working with Mixer FX

In this section you learn how to apply Mixer FX to your mix.

8.7.1. About Mixer FX

A Mixer FX is a grouped effect which can be applied to the audio signal in the Mixer channel by just using the Mixer FX Amount knob. Besides the Filter you can choose one of four Mixer FX from the Mixer FX drop-down menu below the Mixer FX Amount knob. In total TRAKTOR provides you with eight Mixer FX of which you can pre-select four in the Preferences.

Available MIXER FX

Always when you start TRAKTOR, the Filter is selected by default. However, you can pre-select four of eight available MIXER FX:

Basic Usage Tutorials

•Reverb

•Dual Delay

•Noise

•Time Gater

•Flanger

•Barber Pole

•Dotted Delay

•Modern Krush

Pre-Selected Mixer FX

By default the following Mixer FX are pre-selected:

•Filter: The pointer color of the Mixer FX Amount knob is white. The Filter is not removable from the drop-down menu.

•Reverb: The pointer color of the Mixer FX Amount knob is red.

•Dual Delay: The pointer color of the Mixer FX Amount knob is green.

•NOISE: The pointer color of the Mixer FX Amount knob is blue.

•Time Gater: The pointer color of the Mixer FX Amount knob is orange.

8.7.2. Enabling Mixer FX

To enable the Mixer FX for the Mixer channel:

•Click the Mixer FX On button.

The button lights up blue, indicating the Mixer FX is enabled.

8.7.3. Selecting Mixer FX

To select another Mixer FX from the pre-selection:

1.Click the label next to the Mixer FX On button to open the Mixer FX drop-down menu.

2.Select the Mixer FX you want to use.

Виртуальный хостинг

Быстрая загрузка вашего сайта, бесплатное доменное имя, SSL-сертификат и почта. Первоклассная круглосуточная поддержка.

Нужна помощь?

У вас есть вопрос о Native Instruments а ответа нет в руководстве? Задайте свой вопрос здесь Дай исчерпывающее описание проблемы и четко задайте свой вопрос. Чем детальнее описание проблемы или вопроса, тем легче будет другим пользователям Native Instruments предоставить вам исчерпывающий ответ.

Инструкция Native Instruments Traktor Pro 3 доступно в русский?