Yaesu ft 1500m инструкция на русском языке

FT-1500M Operating Manual

Front Panel Controls & Switches

VOL Knob

This control adjusts the volume level of the receiver’ s audio. Clockwise rotation increases the volume

level.

DIAL

This 20-position detented rotary switch is used for tuning, memory selection and most function

settings. Note that the microphone’ s UP/DOWN buttons duplicate the tuning functions of the Main

Dial.

Display

The display consists of segmented digits which indicate operating frequency, status of functions,

alpha/numeric memory labels, and M

functions.

ENU

MHz

This button allows tuning in 1-MHz steps (the MHz digits will blink on the display).If receiving on a

memory, pressing this button the first time activates the Memory Tune (MT) mode, and pressing it

again enables 1-MHz steps.

Press and hold this key for one second to activate the Set Mode.

REV

During split-frequency operation, such as through a repeater, this button reverses the transmit and

receive frequencies.

Press and hold this key for one second to activate the Dual Watch feature, described in the Operation

chapter («PRI» will be displayed on the LED, indicating «Priority Channel» monitoring).

LOW

Toggle this button while receiving to select high/low transmitter power (?/? watts).

Press and hold this key for one second to while receiving on a memory, pressing this button toggles the

display between indication of the frequency and the channel’ s Alpha/Numeric label.

D/MR

This button selects the operation modes: VFO mode, Memory mode, and HOME channel.

Press and hold this key for one second to activate the Memory Storage mode.

PWR Switch

This is the main «ON/OFF» switch for the transceiver.

LCD

Memory Skip

DTMF Memory Mode

BELL

Frequency

Auto Power OFF Active

LOCK Feature Active

S- and TX Power Meter

LOW Power

Memory Mode

Repeater Shift

Priority Channel Scanning

Tone Encoder/Squelch Enabled

Smart Search

Programmable Memory Scan

Home Channel

VFO